Working on remote projects

First of all, happy new year everyone.
I've been working in oracle HRMS for 6 years now and have picked up a bunch of technical skills (BI publisher, workflow etc) along the way. At the moment I'm becoming slightly fed up with all the travelling I have had to do (it was fun in the beginning) and really the lack of leeway I have to pursue my own goals and ambitions. So I got to wondering if there any projects in which oracle professionals can work remotely to deliver reports or fast formulas or whatever and where I can find these online? I saw a similar posting online last month but only after the application deadline had passed.
Any pointers?

Hello Kashif, I know that. Wasn't asking for a job reference, I was just wondering if remote projects are possible in oracle HRMS besides DBA positions and where I can typically find these.

Similar Messages

  • Software Systems Engineer (LV, LV RT, LV FPGA, CVI TestStand, Veristand, C/C++) available for full/part time and remote project work

    I am a software engineer with lots of experience in embedded and test systems. I am a certified TestStand developer, and recently finished a cRIO based embedded system for a medical device company using LV RT and LV FPGA. I have done a lot of TestStand customization and APIs to HIL and other test equipment and created my share of Windows/Linux based C++ applications and libraries.
    I am located in Southeast Michigan and interested in both local and remote project work, as well as full or part time employment.
    I will be at NIWeek 2010 on Wednesday and Thursday. I am holding a session on Simple TCP/IP messaging on Thursday.
    If you would like to meet during NIWeek and/or request my resume please email me at [email protected]

    I saw your posting on the LabView discussion forum concerning your need for a LabView Software Systems Engineer.
    I am a consultant and I am currently available for contract work.
    I have done the things you describe as experience you would like to have.
    I have attached a "Fact Sheet" which describes some of the systems I have built.
    You will notice that I am experienced with developing hardware systems and controls as well as software systems..
    I have over 20 years of experience developing these kinds of systems and have worked with many different kinds of hardware/computer interfaces as well as numerous different software environments.
    If you are interested in discussing this further please call or email me.
    Tom Moser
    ForMost Systems
    North Canton Ohio
    330-470-0404 begin_of_the_skype_highlighting              330-470-0404      end_of_the_skype_highlighting x202
    email:  [email protected]
    Attachments:
    IS 071410a .pdf ‏253 KB

  • Display remote topic in new window with remote project TOC?

    Although I've used RoboHelp for several years, I'm self-taught and work independently, so would have to classify myself as a beginning user. I'm using RoboHelp HTML 6.0 and Windows XP Professional.
    My question is this: I know how to link to a topic in a remote project, but is there a way to display the remote topic in a new help window with its own (remote project's) TOC? I've attached an illustration. Here's the background, if you need it, and why I think I want to do this:
    The company I'm working with previously provided user assistance via three printed manuals: a Setup Guide, a User's Guide, and an Administrator's Guide. The first project I completed for them was to convert the information in the User's and Administrator's Guides into a single online help system. We combined the two because their users are generally smaller companies where the "users" and the "administrators" are often the same people. The Help is deployed as a .chm file on the same CD with software updates.
    The next step we are taking is to transform the Setup Guide to online help. It will be context-sensitive (screen-level) help for each of the 80 or so setup screens that a new user of their software should complete to tailor the application to their business practices and get the most out of it. Obviously users will need a higher level of access rights to be able to perform or make changes to the setup. However we still want to be able to cross-reference the user's help and the setup help, so that the relationship between specific setup choices and functionality is clear and adjustments can easily be made, if necessary, as they gain more experience with the software. For example, a user feels a need for an additional customer description code on a customer profile page. The user presses F1 to view Help for the page, the Help tells them exactly on which setup screen those codes are created, and they can follow the link to those instructions if they want to.
    I want these two help systems to be accessible to each other and the user, and yet retain their separate identities. I don't think I want Setup to appear as yet another book in the User's Table of Contents, which is already somewhat overwhelming. So far I have written it as a separate RH project, knowing that I can import topics to the User help if I need to. Thanks in advance for your help! And don't forget I'm a relative newbie to RH. Thanks!

    I got the new window to open up with the new CHM now...
    As a follow up, it seems I need to define the new window with
    the specific TOC and Index of the new CHM. I there a way to define
    a window that picks up the related TOC and Index of the chm that it
    opens(in this way, a single window type gets created, so that when
    I get a new subsytem, I do not have to keep adding/creating new
    windows, which makes me have to redistribute the main system
    help...which is what I am trying to avoid)

  • How do you setup a remote project with Netbeans 6.1 and IDM 8?

    I have been using Netbeans with IDM 7.1 fine, but have now upgraded to IDM 8 and want to use the new Netbeans plugin. However there is no ide-bundle.zip with IDM 8. If you try to connect to IDM 8 using the previous bundle from 7.1 you get a compatability error. Anyone able to give help on this?

    I have setup a remote project using the other setting of configuring the repository yourself. I couldn't use the remote method as it requires this file from your localhost file store and as I am using a different machine to run netbeans this wouldn't work. The other method allows you to put in connection information.
    I am not sure of the point of the remote method as it doesn't allow what the name suggests.

  • Adobe Media Encoder stopped working in this project, works in others

    Adobe Media Encoder just stopped working in my current project (in PPRO CS3). I'd output several MPEG2-DVD and Windows Media Files. Then I went to make one more MPEG2-DVD file, and when I clicked OK in AME, nothing happened. It should open a window to select where I want to put the file, and a few more options. No crash, no freeze, no error messages..and no output.
    None of the AME formats work (WMF, Quicktime, etc). But other exports do work. I made my MPEG2-DVD file using Export to Encore.
    I opened another project I'm working on, and AME does work in that project.
    Back to my current project, and it still doesn't work.
    I've rebooted, and uninstalled-reinstalled PP CS3.
    Anyone fixed this?  Thanks!

    After some more playing, I discovered that the other sequences in this project do still export using AME. So I made a new sequence, copied all the media from the problem sequence into the new one, and it exports OK.  I lose fairly extensive Encore chapter marking, but that's a minor problem. No way to "cut and paste" chapter markers, I don't suppose?
    For curiosity value, if I make a duplicate of the problem sequence, all the media in the duplicate sequence has a red bar (unrendered) except for the parts that have already been rendered, which have a green bar. This is straight transferred DVCam media and shouldn't need rendering.  If I add some new video to the sequence, it gets a red bar too. Bizarre. Oh, and it won't export.
    I tried a few other tricks with the original problem sequence: delete all media, and replace with one new short clip; delete the chapter markers; shorten the work area bar to just a few seconds and try to export "work area only"; turn off tracks; deselect either audio or video in AME... nothing worked to make this sequence export.
    I also tried making a whole new project, and importing this one into it. Nothing changes - the problem sequence still wont' export, a copy of it leaves all media "unrendered..." exact same trouble as the original project. But it was while playing with this new project that I discovered that my other sequences did export, leading me back to the original project. That should have been the first or second thing I checked. Brain-dead Sunday.
    Conclusion: something corrupt in the sequence, but darned if I can figure out what. Not the media. Not the chapter markers. There's code in the sequence itself, and I guess that must be it.
    Enough time wated on this project. Thanks, all!
    Gary

  • I was working on a project a few days ago and now I'm not getting any audio or visuals out of it. In the project file the screen went grey. Not sure how to fix this. I'm new to iMovie, but the program seems easy to use and my Mac is new. Any help?

    I used to use Movie Maker and it would be able to handle lots of file uploads and big projects. I figure iMovie can do the same since it's newer and it's on my iMac. I was working on a project for a few months, it was working fine up until about a few days ago when the project file just stopped working. Not getting any audio or visuals and the screen went grey. I hope to not lose the project file as I've spent a lot of time on it. The project will still show up in iMovie, but it won't play. Other project files will, but this one won't for some reason. It's my first time using this program and I assumed it would be fine, but now it's causing me big problems. Anyone else run into a similar problem?

    But it is I jsut can sync, back up files, or anything becuase its stuck at this screene and wont do execute when i click either of those button

  • Does Firefox have some kind of firewall??? Recently I can't print or connect to my work computer remotely. Two things I was always to do in the past.

    Recently I can't connect to my work computer remotely and I can't print things even when I am using my desktop which is directly connected to the printer. If I go to Internet Explorer or AOL I have no problems but since I mainly use Firefox this has become a major problem.

    I encounter similar problem. My TC detects my OKI printer which is connected to the TC via USB but I can't print unless I connect my printer to the TC via Ethernet. Would anyone know how to solve it. Thanks.

  • Is it possible that 2 separate computers working on one project?

    Hi,
    I have the problem that 2 people must be able to work on the same project:
    (not necessary at the same time)
    1. Person does all the image adjustments (which is me the photographer)
    2. Person does all the metadata.
    The project is installed on my computer, Aperture is installed of both computers.
    So,
    Can 2 computers work on one Project?
    (we are connected in a network via Ethernet)
    Or how could this situation work?
    AP would save us a lot exporting and importing (where we usual loose the iptc data along the road) if this is possible.
    thanks for your help...

    There was an earlier (much earlier) post regarding this same topic when Aperture first came out. If memory serves me, the answer to your question is 'no', but that answer was for your not being able to have two people working on the same project library at the same time. However, if you can place the library file on a drive that has enough throughput across a network, then I don't see why you wouldn't be able to do what you want as long as only one person access the library at a time.
    However, performance is going to be your biggest issue.
    Jeff Weinberg

  • Is there a way to know how many hours of work did a project demanded ?

    Is there a way to know how many hours of work did a project demanded (even if it was on multiple days, sessions or cross-working other projects)?
    I am using Adobe Premiere Pro CS6 on windows 7.
    Thaks,
    Mihai

    There is no feature for that in Premiere Pro.  I suggest that you keep a project log either in a spreadsheet, database, Notepad or Wordpad file, or a hand written one.
    You can file a feature request here:
    Adobe - Feature Request/Bug Report Form

  • I was working on a project in iMovie (10.0.1) and iMovie just crashed. when i reopened it the project i was working on disappeared. in my list of projects it still says i have 3 projects but its only showing me 2. is there any way i can recover my project

    i was working on a project in iMovie (10.0.1) and iMovie just crashed. when i reopened it the project i was working on disappeared. in my list of projects it still says i have 3 projects but its only showing me 2. is there any way i can recover my project?? PLEASE HELP!!!

    iMovie on your Mac  has nothing to do with iCloud storage.  Download and use Find Any File  to search for your iMovie project.  FAF can search areas that Spotlight can't, like invisible folders, packages and system folders.  If there a file with your file name on it anywhere on the hard drive FAF will find it.
    Do you have Time Machine enabled backing up to an external HD?  This situation is exactly what TM is good at.  It makes hourly backups so you can go back to find and restore the missing file.  All HDs crash at some time or another and having a good backup strategy is the only protection against that.

  • Is there a way to split a Muse file so that 2 or 3 developers can work on the project?

    I would like to know if using both Muse and Business Catalyst we can split the work so that 2 or 3 developers can work on the project?  I know that we can use folders for each developer however by doing so it creates an index.html in each of the folders.
    Has anyone been able to create an environment for multiple developers on the same project?

    Hi Gaurav,
    I appreciate the reply.  The thread you provided is not quite what I was looking for.  I have a site that I would like 2-3 Muse developers to work on.  They would each get a piece of the site and we would somehow pull it together into one cohesive program.  For example we have an association made up of 20 villages.  One developer would work on the individual village pages, another on the overall structure of the association and a third work on the Amenities.  Everyone would need to be working at the same time using MUSE.  I don't think we want to be doing any development in BC.
    Anyone else out there who is doing something similar?

  • I need to connect to my work PC remotely from my macbook. I think I need the citrix software. But which version and what is the procedure?

    I need to connect to my work PC remotely from my macbook. I think I need the citrix software. But which version and what is the procedure?

    Probably don't need citrix software. Is you computer in the office on LAN? Also, is the office computer setup for remote access? If it's windows then its going to be running Remote Desktop Protocol (RDP) natively. If it is in fact RDP that your windows machine at work is using then you need to download RDC for mac. I use it to connect to my work computer using RDP (don't tell the "Info Tech" dude at my office) and if your not too tech savvy I would suggest trying GOTOMYPC. It's alot easier to setup. But if you have experience in setting up remote access and your Windows office machine is connected through LAN and your IT TECH has allowed port forwarding then you should be just fine with RDP and it's free!!! But are you logging onto your actual computer at work or logging into the "SERVER" through your work machine... believe me it's two completely different things.
    Basically, you'll need:
    1. Physichal IP address of work computer. (If office computer is on WIFI this won't work) use IPCONFIG commands in command prompt
    2. Port forwarding needs to be enabled by your IT Tech
    3. Remote Desktop settings will need to be enabled on the office computer
    4. Download RDC for mac (search google)
    5. Type the physical IP address into RDC and hit connect... type in credentials and your all done.
    We need lots more details though... there are many ways to connect remotely and if your office already has a system in place for remote access then any details would be helpful in determining which method will suit you best. If it's citrix just have your IT dude set it up. If you think you need citrix then good luck....

  • Currently i am working in InDesign CS5.5 version 7.5 i am working on a project that requires working

    currently i am working in InDesign CS5.5 version 7.5
    i am working on a project that requires working with another person who is using the latest version of CC,
    how will CC effect my current project and will i be able to share the file ?

    It could be a one way trip.
    There have been instances where your older version was more stable for CC as an exported idml.
    Prior to ver 7 (?) text engines were occasionally updated which would cause text to reflow in later versions.

  • Toggle button does not work correctly in project preview

    Hello,
    I am working on a project and recently discovered the "toggle button" advanced action that lilibiri posted (Love the toggle button!!). Initially i had used the rollover funktion but found out via html5 tracker, that rollover is not supported by html5 and tablets. To the problem: When I test the slides individually everything works fine. As soon I preview my project and click on my smartshape buttons that toggle the image/text, the project jumps back to previous slides. Now, i probably do not understand the conditional action in terms of what it is actually telling CP to do. So i am guessing it is a user problem. I would be super greatful to anyone who can help me solve this, since i am bound to a dead line to finish this. THANKS!!
    -N
    Here are some screenshots of the conditional actions (its in german..."Ausdruck" is Expression, "Einblenden" is Show, "Ausblenden" is Hide

    Hello,
    You are mixing up Frames with Slides. Try:
    Expression  cpCmndGotoFrame = cpInfoCurrentFrame -1
    Lilybiri

  • Numbers 3.2 has changed too much, it doesn't work with my project anymore. How do I revert back to the previous version I was using?

    Numbers 3.2 has changed too much, it doesn't work with my project anymore. 1) The sheet panels used to be on the left hand side and easily reviewable and searchable, but now they are on the top and it's harder to find a specific folder without scrolling (too time consuming), 2) I used to be able to duplicate a folder within my sheet panel window by simply clicking on a folder and hitting Command D, but that doesn't work now so it looks like I'll have to spend even more time to recreate the same tables that used to be easily duplicated, and 3) I can't choose fill colors that matched my project anymore because there are only limited choices available now. And these are only the changes that I'm aware of. I am very disappointed and frustrated. Whatever the motivation was to limit Numbers 3.2, I want the previous version back. How do I revert back to the previous version I was using?

    The sheet panels used to be on the left hand side and easily reviewable and searchable, but now they are on the top and it's harder to find a specific folder without scrolling (too time consuming),
    You can scroll more quickly between sheets if you don't use the left-right triangles, but instead move the cursor up into the bands with the "tabs" and drag right or left.
    Also, if you have a lot if sheets for which you want a quick vertical list, then you can try the following have something like this pop up (showing your sheet names automatically) whenever you hit a keyboard shortcut (in my case shift-command-j):
    This is done via a Jump to Sheet Automator Service (Dropbox download).  To install just doubleclick the .workflow package and (if needed) click 'Download Anyway' in System Preferences > Privacy & Security.
    This will cause a new item to appear in your Numbers > Services menu.  Then, if you want a keyboard shortcut, go here in System Preferences and add one:
    You can rename or remove the service by holding down the option key in Finder and choosing Go > Library > Services. You can also view the AppleScript contaned within the service by opening the .workflow package in Automator.
    This particular service jumps to the first cell of the first table of the sheet you choose from an automatically generated list of all sheets in the current document.
    SG

Maybe you are looking for