Software Systems Engineer (LV, LV RT, LV FPGA, CVI TestStand, Veristand, C/C++) available for full/part time and remote project work
I am a software engineer with lots of experience in embedded and test systems. I am a certified TestStand developer, and recently finished a cRIO based embedded system for a medical device company using LV RT and LV FPGA. I have done a lot of TestStand customization and APIs to HIL and other test equipment and created my share of Windows/Linux based C++ applications and libraries.
I am located in Southeast Michigan and interested in both local and remote project work, as well as full or part time employment.
I will be at NIWeek 2010 on Wednesday and Thursday. I am holding a session on Simple TCP/IP messaging on Thursday.
If you would like to meet during NIWeek and/or request my resume please email me at [email protected]
I saw your posting on the LabView discussion forum concerning your need for a LabView Software Systems Engineer.
I am a consultant and I am currently available for contract work.
I have done the things you describe as experience you would like to have.
I have attached a "Fact Sheet" which describes some of the systems I have built.
You will notice that I am experienced with developing hardware systems and controls as well as software systems..
I have over 20 years of experience developing these kinds of systems and have worked with many different kinds of hardware/computer interfaces as well as numerous different software environments.
If you are interested in discussing this further please call or email me.
Tom Moser
ForMost Systems
North Canton Ohio
330-470-0404 begin_of_the_skype_highlighting 330-470-0404 end_of_the_skype_highlighting x202
email: [email protected]
Attachments:
IS 071410a .pdf 253 KB
Similar Messages
-
New software update available for Nokia C2-02 and ...
Hey,
There's a new SW update available for Nokia C2-02 and Nokiw C2-03: version 7.63. These device models are also sold as C2-06/C2-07/C2-08 on certain regions. The update is already available via Nokia Suite, FOTA update should be coming out sooner or later as well. I will post an update about the here later on.
Key changes:
A warning is now given when the volume is too loud
Improvements to the display brightness
Can now unsubscribe from the Tips and Offers service
Timezone fix for Russia and Argentina
Fix for device camera sometimes crashing during taking photos
General usability & performance improvements
http://www.microsoft.com/en/mobile/nokia-x-updates/
http://www.microsoft.com/en/mobile/nokia-x2-update/
http://www.microsoft.com/en/mobile/asha-software-update/
http://www.microsoft.com/en/mobile/support/software-update/wp8-software-update/
http://www.developer.nokia.com/Community/Wiki/Nokia_firmware_change_logs
https://twitter.com/LumiaSWUpdatesHi iluyimbazi
Thank you for posting and welcome to Nokia Support Discussions!
Try to reinstall the software of your Nokia C2-02. Using Nokia Suite click on Tools > Software update > Reinstall.
If in case you can't reinstall the software, try doing a master reset. Go to Menu > Settings > Restore factory settings > Restore All.
Note: Create a backup first before doing any kind of reset to avoid deletion of data. If prompted for a lock code, enter 12345 unless you changed it.
If my post helped you, please don't forget to click on the "White Star" and if it resolved your issue click on "Accept as Solution" -
Macbook OSX 10.5.8, iPhoto 8.1.2. I just tried to import some photos using Nikon software (View NX2) for the first time. When I next looked into iPhoto it was empty (so was iTunes but that's another story). I had backed up photos fairly recently but don't use time machine. Searched in vain everywhere and must have done something wrong because iPhoto wouldn't then open at all, saying it was unreadable. After a lot more attempts to recover I uninstalled iPhoto and the receipts and reinstalled from my original disc. It seemed to be ok and imported some photos from my iphone but as soon as the import is complete iPhoto crashes and when opened again it is empty. Have tried this several times and have shut down and have tried rebuilding with the alt and cmd buttons but nothing seems to help. Any ideas?
not a reply but not sure how to add something to my own thread! It seems that Desktop was damaged too as when I try to open it a screen says there is no application selected to open Desktop with. No idea what I should choose! Any help appreciated, have really made a mess of my MacBook this time.
-
Printer Software not Working for Windows 8.1 and Drivers not Working with USB 3.0
We have a HP CM1312 MFP. We recently got two new windows 8.1 machines. We tried downloading and installing the windows 8 64 bit software, but everytime we tried installing the software the software program would exit abruptly.
We then tried just downloading the printer drivers and installing these. They installed ok, but when we tried to connect the printer via USB it said the printer did not support USB 3.0 which are the only ports we have on the new computers.
Is there a solution to either of these problems? Without the software we cannot use the fax or scanner.
Thanks.Can you connect USB 2.0 data drives?
What make/model are the computers?
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee. -
My ipod touch stopped playing videos and music for the past three days rest all are working fine.
I doubt the sound system is gone. i tried restoring it several times. I havent mishandled it. Few days back there was audio distortion and slowness so i upgraded to the iOS 5 but the audio/ video doesnt work. Alerts ,sounds ... donot work..Please help me out...Try a restore to factory defaults/new iPod. If still problem then you likely have a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
-
Please help with the software problems. I now this computer is old, but it works. Advice?
Wipe the drive and reinstall Lion.
-
How can I tell if a software has been downloaded AND installed on my ipod? Tried 3 times now.
iTunes will tell you when you sync.
For help, see iPod Support: http://www.apple.com/support/ipodtouch/
specifically the "learn more" link under "Upgrading to iOS 5": http://support.apple.com/kb/HT4972
Message was edited by: EZ Jim
Mac OSX 10.7.3 -
I have a 4th generation iPod. My system is Windows 7, 64-bit. iPod not recognized in iTunes. It is in my computer. Also getting iTunes error message about cd/dvd drivers not properly installed. I've restalled 5 times and still not working. Finally got iPod software to properly install. Please help!
Did you try this:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7 -
I brought an old IPhone 3GS to the UK on vacation for use with sim card. I had the phone unlocked with approval and instructions from ATT. Store in the UK recommended O2 pay as you go sim which works as long as the phone remains plugged into the wall. Once unplugged, it will work for a short time and then always crashes. Sometimes it will re-boot and crash again and sometimes it will not re-boot at all. One store told me to sync with itunes which I did on my Mac Book. I don't know if the sim is defective or if the software of the 3GS is just not compatible with the sim when on the battery. I have updated the software on the phone as far as it will go. Any suggestions? Maybe the phone is too old to use with the latest pay as you go sim cards. I am disappointed that this phone has not been reliable as a pay as you go and I have had to purchase a UK phone here in order to have a reliable phone.
There is nothing you can do. You bought an illegally unlocked phone off Ebay. A lot of sellers there will tell you it is unlocked but the first time you try to update the operating system it will put the lock back on to the carrier the phone was originally locked to. Sorry but unless the carrier it was locked to will unlock the phone I am afraid you have a very expensive paper weight now. You should have bought it from a reputable dealer instead of ebay.
-
I had firefox on my mac for the longest time and woke up one day and it was gone...poof. I am trying to install it again and each time i try to download it and install i get an error message stating it is not the right browser for this operating sysytem....help me please. I did of course download the firefox for mac system
*Firefox 4 versions and later do not run on a PowerPC Mac.
*Firefox 4 and later require at least OS X 10.5 and an Intel Mac.
* http://www.mozilla.com/firefox/5.0/system-requirements/
For an unofficial Firefox 4 compatible version (TenFourFox) that runs on PowerPC Macs with OS X 10.4.11 or OS X 10.5.8 you can look at:
* http://www.floodgap.com/software/tenfourfox/
Firefox 3.6.x (Mac OS X 10.4 and later) can be found here:
* http://www.mozilla.com/en-US/firefox/all-older.html -
Building a system for the first time
I recently posted a few weeks back about buying a system from either Dell or HP http://forums.adobe.com/thread/732545?tstart=0. I quickly learned that those systems were not going to fit my need based on my budget. So, I decided after researching components that I will build a computer by hand for the first time. I am still operating on a budget of around $1000, but I'm giving the budget a bit of flexibility so I don't limit my options. I am a hobbyist who only has experience using Power Director on my laptop, but I had a lot of fun editing for the first time and I want to step up my game. With the new system, I plan to use adobe premiere cs5 and after effects. I will capture my video from either an HD Helmet cam or HD flip format is MPEG-4 AVC/H.264. So where I need help is selecting the right things to optimize my performance. The following is a list of items I'm looking with their prices. Please help me decide what will be right for me. Open to any combo of suggestions or comments. Thanks!
Processor
Intel i7 930 $200 microcenter
Intel i7 950 $230 microcenter
I don't know if I want overclock yet, but it sounds like a good idea. $30 for the upgrade to the i7 950 seems pretty good. ro do I use the money elsewhere?
Motherboard
GIGABYTE GA-X58A-UD3R $210
http://www.newegg.com/Product/Product.aspx?Item=N82E16813128423
Seems like a good mobo. Are there any features that this board lacks that I should look for in another board? Also, newegg offers significant deals on "open box" products. Is this a good way to go?
Ram
I have a few questions for this selection. I've currently budgeted approximately $250 for ram. I'm looking at going with 12GB. I certainly don't have the budget for 24GB, but what about 16GB?
Do I look for 1333 or 1600? 2GB or 4GB sticks? Would I be fine if I bought say 2 packs of 6GB ram, both same manufacturer and same type or would I want to buy 1 pack of 12GB?
GPU
Nvidia Geforce gtx 460 1GB $220
Is it worth it to go to the 470? I know it's a better card but being a budget is really worth the upgrade or can I get away with a 460?
Any recomendations for a 460 as there are many in the same price range?
Drives
I see these drives priced in the $55 range which would leave at around $220 for the lot of em
These are the drives I'm looking at as they are highly recommended on this board:
SAMSUNG Spinpoint F3
WD Caviar Black
Right now, I plan to buy 4 drives. Do I want 4 of the exact same? or say 1 cavier black for os/ programs and 3 samsung f3 for pagefile/scratch/renders? Can I also get a brief description of what these are too? Also, could have a 500gb for os/programs and 1tb for the rest or would it be advisable for 1tb for all? or 500gb for all?
I don't think I can do a raid setup based on my budget, but I saw this as an option on the thread for storage rules is to use the on-board IHCR or Marvell chip. I don't know really anything about this, but what would the price be to explore this option?
Case
Cooler Master Storm Scout $90
http://www.newegg.com/Product/Product.aspx?Item=N82E16811119196
I picked this case for a few reasons. I seem move about every 6 months so the handles on top would be very useful, and it seems to have good cooling. I know a full size case is recommended, but they seem to be significantly more.
Cooling
Noctua NH-U12P SE2 120mm SSO CPU Cooler $75
Everywhere I look this cooler seems to get great reviews. I figure it could be a good idea to get a good cooler if I get a mid-tower case.
The only other option I can think of for case/cooling is to combine the budgeted price for both and look at different options like a full size case with a less quality cooler. Is this a better option
PSU
Looking into an 850 W power supply. I figure to budget $80 towards as I've seen a few in that range
http://www.newegg.com/Product/Product.aspx?Item=N82E16817517003
so would something like this work?
Final Thoughts
So, when you add it all up its about $1350. First question, how does this look overall? Nothing I've chosen is obviously overkill, but is there anything I can afford to go cheaper on? or anything I should invest more into?
Thanks again to everyone for the help. The resources, info and people on this forum have just been awesome.Seems like we are planning very similar PCs. My build is going to be for: amateur video editing including animation mainly with CS5, application design and coding mainly with MS Visual Studio 2008, HTPC (until I build a cheap dedicated unit for the TV), general family computing. I am new to this stuff, but can at least share some pricing and my decision making process so far.
Here is what I have selected so far regarding the parts:
MotherBoard: Gigabyte GA-X58A-UD3R x58
Seems like one of the lower cost x58 MBs and has some decent reviews. Wait for a sale, you should be able to find this for around $180.00. That is how much I got it for from New Egg (straight up with savings code no rebate), should be arriving on my doorstep tomorrow. Also, I think Fry's has it now for $170.00 in store, but that includes a $20.00 rebate and tax.
PowerSupply: Corsair TX650W
Some might think this is on the low side. On the other hand, I have gotten other conflicting advice, stating that many people overestimate their actual power needs. So who knows. I have read that a PSU works more efficient when it is matched to the power needs - meaning that a 1000w PSU that is generally seeing 200w usage might not be so efficient. Anyway, I got the PSU for $50.00 from New Egg (with rebate), and it has a good reputation, so we will see how it goes.
Graphics Card: GIGABYTE GV-N460OC-1GI GeForce GTX 460 (Fermi) 1GB 256-bit GDDR5
I was planning on a lower cost card, but then noticed this card for sale over the weekend for $178.00 (with rebate), so I ordered one. I have read the GTX460 has reasonable power requirements, and can be made to take advantage of CUDA/Mercury with CS5 (although haven't done much research into that). This particular version based on reviews, seems fairly quite with the twin fans. It's possible I overspent a bit on this card considering my needs, time will tell.
Here is what I am planning to purchase:
CPU: i7 930
I am fortunate to live near a Fry's and MicroCenter ($200.00). From reading the forum, seems like this is generally the lowest CPU folks go in terms of building an editing machine. I understand the argument that for only $30.00 more, one can upgrade to the i7 950. On the other hand, that argument could be made for many of the components, and then before you know it, a little extra here and there, and the budget is shot:) So I am planning to draw the line at the 930.
Here are my undecided’s:
Memory
I am up in the air between 6or12gig/module compatibility/cost. But one thing for you to keep in mind, is the official memory certified for the motherboard you select. For the Gigabyte motherboard, I missed out on a recent RAM deal, because the RAM was not officially certified for the board. Some people tell me this is important, while others say "RAM is RAM" and no big deal. Something to consider.
HardDrives
Same as you, considering the Samsung Spinpoint F3. Good prices now at MicroCenter on the 16MB cache models in 500 and 1TB sizes. I just don't know if larger cache sizes are important or not, since they are also offered in 32MB and higher.
Anyway, good luck with your build and hope it works well. -
Experienced LabVIEW Engineer looks for part time projects
Swedish LabVIEW Engineer with over 5 years of experience. Speciallity: analysis and Vision applications.
Looks for smaller part time projects (that can be performed at distance).Hi,
I have 6 years of experiences in labview application.I would like to develop the code through the internet.
Kindly let me know if the openings still available. -
Timer problems on Linux changing system time and data
On Linux SO,
both with flash player plugin and standalone flash player, setting system time with command:
date -s 11:11:11
hang timers (flash.utils.Timer) immediately!I notice that updating system time (both with "date -s hh:mm:ss" and through ntpd) with a new time in the future doesn't hang up flash.utils.Timer component.
Contrary, if I update system time with a past new one, flash.utils.Timer stops work immediately!!!
This is huge problem for those interfaces that need to run for a long time and also need to be time updated (for examplem through ntp daemon).
Can anyone help me?
PS: Windows Flashplayer doesn't have this problem !! -
Software Development Engineer
Hysitron, Inc. is a premier scientific instrument manufacturer. Founded in 1992 with headquarters located in Eden Prairie, MN we are committed to promoting nanotechnology by developing advanced transducer and control technology. This leadership has made Hysitron the world leader in nanomechanical test instruments. The TriboIndenter®, TriboScope®, Ubi, and other Hysitron innovations have opened new horizons for scientists interested in investigating and understanding mechanical properties of materials at nano-scale. Hysitron fosters an environment and culture where innovation flourishes, teamwork is encouraged, and superior performance is rewarded.
Hysitron invites applications for multiple software development engineer positions from those aspiring to explore and succeed in the nano world. Hysitron, Inc. is an Equal Opportunity Employer M/F/D/V
Job responsibilities
The software development engineers would be responsible for developing test and measurement software applications for nano-mechanical testing instrumentation. Job deliverables would include:
- Develop software applications in C based Labwindows CVI for Hysitron Instrumentation
- Support the development of applications to address challenges in instrument automation and control
- Test software applications using debugging and simulation tools
- Perform software releases and software quality assurance activities
- Participate in the design of new software products
- Perform maintenance activities for existing products
- Adapt and deliver on quality software development practices
Minimum qualifications
- BS in Computer Science/ Computer Engineering/ Equivalent Scientific or engineering discipline
- Min of 3 yrs experience in Instrumentation software development in an industrial or R&D environment
- Expert at programming language C, knowledge of C++
- Working knowledge of various communication protocols, e.g. USB, RS232, IEEE, RS485, TCP/IP, Modbus
- Knowledge of general software design/documentation processes in test and measurement systems
- Proficient problem solving skills
- Strong analytical and technical skills
- Excellent communication and interpersonal skills
Preferred Qualifications
- Proficient with LabWindows CVI and XML
- Working experience with DSP(Code Composer Studio) and/or FPGA level programming
- Exposure to digital electronics and instrumentation
- Working experience in Robotics interface programming
- Experience with Controls/Automation engineering
Application and Information
Qualified candidates should send a letter of application and their resumes to (please include ‘SW Engineer’ in subject line):
Hysitron, Inc.
10025 Valley View Rd
Eden Prairie, MN 55344 USA
Phone: (952) 835-6366
Fax: (952) 835-6166
E-MAIL: [email protected]
Web: www.hysitron.comThis position is still accepting resumes/CVs.
-
2x LabVIEW Systems Engineer Full Time Positions – Sheffield and Bristol, UK
2x LabVIEW Systems Engineer - Full Time Positions – Sheffield and Bristol, UK
1.0 Description:
As a Systems Engineer, you'll be part of a team that is responsible for developing both hardware and software applications based on Object Oriented Technology and Event based Architecture primarily in the LabVIEW Programming Language and National Instruments Hardware Platforms. You will help customers from all kinds of industries on various issues, from getting started with LabVIEW software, to help with programming, debugging and onsite commissioning of complex systems including distributed embedded systems. There will also be items such as creating demos and working on proof of concepts. You must exhibit strong problem solving, communication and business acumen skills alongside a passion for technology. You will get the privilege of an insight into the engineering practices from a range of industries and be providing a consultancy on their system requirements.
2.0 Duties and Responsibilities:
The duties and responsibilities of this position include, but are not limited to, interacting directly with customers to program, train, inform, advise and consult in the design of their applications using the best test and measurement hardware and software by:
◦ Programming memory and speed efficient applications using LabVIEW and Object Oriented Programming and Event-based architectures.
◦ Developing intuitive GUIs.
◦ Selecting the correct measurement hardware for a given application based on a customer’s specification.
◦ Providing timely, accurate and effective solutions to technical problems.
◦ Providing guidance on the installation and working functionality of both software and hardware, including explanation of configuration settings.
◦ Reproducing and troubleshooting problems and incompatibilities in both software and hardware.
◦ Delivering professional and high quality, customer education courses.
◦ Delivering technical presentations and demonstrations to customers, colleagues and partners.
◦ Remaining aware of all competitive products and how they compare technically with Austin Consultants' core products.
◦ Working with the business development team to develop proof of concepts for customers.
◦ Travel 50% of the time.
3.0 Qualifications & Requirements:
◦ Minimum 2.1 honours degree in engineering or science related field, such as Electrical/electronic engineering, physics, mechatronics or computer science.
◦ Firm understanding and knowledge of National Instruments LabVIEW and TestStand, including LabVIEW FPGA and LabVIEW Embedded.
◦ Understanding of object oriented principles.
◦ Ability to pass CLA exam within the year.
◦ Knowledge and experience in instrumentation & control, and industrial automation is required.
◦ Experience with all National Instruments hardware platforms, including DAQmx, cRIO, PXI, SCXI and cFP.
◦ Practical electrical debug experience.
◦ Experience in a second language of JAVA, C and C++ is preferred but not essential.
◦ Ability to learn new skills/languages/applications quickly (MATLAB, JavaScript, STK, etc.).
◦ Must be able to handle multiple tasks and enjoy working with people.
◦ Strong problem solving skills to analyse the problem and think creatively to provide a solution.
◦ Excellent written, oral and presentation skills are key.
◦ Ability to deal effectively with customers to make them successful is essential.
◦ Ability to get along with others and function as a team player as well as work effectively alone.
◦ A proactive/can do attitude is vital and a happy view on life.
◦ Legal right to live and work in the UK. Sponsorship is not available.
◦ Must hold a full clean and valid UK driving license.
4.0 Location:
There are two positions for this role, one in Sheffield, South Yorkshire, UK and one in Bristol, UK
5.0 Reporting:
Systems Engineers will report to the Technical Director.
6.0 Salary:
Competitive salary based on level of experience.
7.0 Application:
To apply for this position please send a copy of your CV to
[email protected]
Please state the job title of LabVIEW Systems Engineer and the location for which you are applying in the email subject.Hello,
I Aravindu.P completed M.Sc(Electronics & Instrumentation).I have one year experience working with Labview and embedded systems programming(Software and Hardware).I am very hardworking and sincerity.I want to working with industries like this.So please reply me.
Attachments:
Aravind_Resume (1).docx 18 KB
Maybe you are looking for
-
I just bought a new iPod classic, and have spent much of the weekend (too much really!) loading my vast CD collection onto it. I have now noticed that with some CD's - compilation type ones such as soundtracks (but not all) it has either listed the t
-
We want to the whether the below functionality exists in SRM
We want to the whether the below functionality exists in SRM. In the shopping cart when we click on the details against any item and get in to the follow-on documents. We have two options. 1) Display as Graphic 2) Display as table. When we select gra
-
From Slow Startup to No Startup
Hi there: I'm sorry if this is a Leopard issue and I'm in the wrong forum, but it's a white Macbook, about 18 months old. Anyway, I couldn't get iTunes to open (or Force Quit, for that matter), so I rebooted. The startup process went fine (chime, App
-
Arranging object inside of a movie clip
Hi, everybody. I am new to Flash therefore my apologies for dumb questions up front- Here we go. I have four animated buttons with a design element cross_mc inside of another movie clip content_mc. I need all four buttons to be in front of the cross_
-
I always get a notification after a restart. When I unlock the device, the notification disappears. Am I the only one with this issue or is it a known bug? I'm on v10.0.10.99 I don't know if this is already solved in 10.1.