Working problem in 9.21

Hi,
I've made a very simple test in OATS 9.21. This test process repeats only 2 steps at 20 times and stop. (It is a recorded test.)
These steps are very simple too: write a word into a textfield and click a "search" button -> search the word from a db and list the result.
I've got a problem in the "test manager" so many times. It's an unusual problem. It seems that the button wasn't clicked or clicked (??) but the action of this event didn't happen (??).
It seems that this process made an endless loop (??). Why? In the wrong steps this process were waiting and waiting and waiting ... for what?
If I playback the whole test in the openscript modul, this was successfull. (It was the same test, I didn't modify it.)
Sometimes this test was successfull in the test manager modul too (for example in 2 times was successfull and in 8 times wasn't)
Can anybody help me? What can this problem be?
(I use OATS 9.21 and Java 6 update 23)
Regards
Steve

Hello Steve
Correct me if I'm wrong: you apparently have a problem replaying the OpenScript script from Oracle Test Manager web interface, right? Where the script runs fine directly in OpenScript, is that correct?
If this is the case, you need to setup a couple of things before executing a script from Test Manager.
•     Run once the script locally on the OTM agent
•     Leave the OTM agent session opened (ie Windows logged in)
•     Run the Oracle Application Testing Suite Agent Service as a specific user (not system account) in the service panel or better, stop the service and launch it from the command line with this command indicated in the OATS releases notes.
It could be also a timeout issue, so try to increase default time out.
At least we encourage our custome to migrate to 9.3 (easy migration) to get some benefits like getting the full functional test reports in Test Manager with the screenshots.
If this is not correct, well, i don't really understand your problem ^^
Good luck
JB

Similar Messages

  • Can't install netbeans 8 on windows 7 ultimate 32 bit (Java Platform SE binary has stopped working), problem event name : BEX

    I can't install netbeans 8 on my windows  7 ultimate 32 bit. Please help me.. This is the error message :
    Java Platform SE binary has stopped working
    Problem signature:
      Problem Event Name:    BEX
      Application Name:    java.exe
      Application Version:    8.0.5.13
      Application Timestamp:    53280287
      Fault Module Name:    StackHash_2264
      Fault Module Version:    0.0.0.0
      Fault Module Timestamp:    00000000
      Exception Offset:    00000040
      Exception Code:    c0000005
      Exception Data:    00000008
      OS Version:    6.1.7600.2.0.0.256.1
      Locale ID:    1033
      Additional Information 1:    2264
      Additional Information 2:    2264db07e74365624c50317d7b856ae9
      Additional Information 3:    875f
      Additional Information 4:    875fa2ef9d2bdca96466e8af55d1ae6e
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\Windows\system32\en-US\erofflps.txt

    1. I had similar problem and upgrade of BIOS has helped.
    2. Try Oracle support forum if 1 does not help.
    Rgds
    Milos

  • Console Application Stopped Working : Problem Event Name: CLR20r3

    When executing the SMSConsoleApplication.exe on my server (via rdp) the process opens and closes within a few seconds by monitoring it via task manager.
    This happens when I run it as my user or as local admin in the server.
    When I execute the app on a different server (via rdp) from the shared directory or from a local copy, I receive the following error when executed as my user or as admin:
    Description:
      Stopped working
    Problem signature:
      Problem Event Name:                        CLR20r3
      Problem Signature 01:                       smsconsoleapplication.exe
      Problem Signature 02:                       1.0.0.0
      Problem Signature 03:                       536332ab
      Problem Signature 04:                       System
      Problem Signature 05:                       2.0.0.0
      Problem Signature 06:                       506c18e6
      Problem Signature 07:                       1fc1
      Problem Signature 08:                       1c8
      Problem Signature 09:                       System.Net.WebException
      OS Version:                     
                        6.1.7601.2.1.0.274.10
      Locale ID:                          
                      1033
    Read our privacy statement online:
    http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
    C:\Windows\system32\en-US\erofflps.txt

    Hi Sasikala,
    The forum supports .net framework setup. I think your issue is not about the installation of .net framework.
    You could use the .NET Framework Setup Verification Tool to verify the installation state of one or more versions of the .NET Framework
    Download from :
    http://blogs.msdn.com/cfs-file.ashx/__key/CommunityServer-Components-PostAttachments/00-08-99-90-04/netfx_5F00_setupverifier_5F00_new.zip 
    More information is in the blog at the following locations.
    http://blogs.msdn.com/b/astebner/archive/2008/10/13/8999004.aspx
    I think your error is about your code. Have you debugged your code? And what the detailed error message did you get? What technique did you use in your code? WPF? I suggest you go to the related forum for better support.
    Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click HERE to participate the survey.

  • Vista STILL getting "Export Controller has stopped working" problem

    Everyone knows about the "Export Controller has stopped working" problem. The error message displays, then half a minute later, you get a "Quicktime has stopped working" error message. I have Googled it numerous times and I have never found anything more than what I did the first time. As far as I'm aware there are still no fixes for this problem. I believe there has been about three Quicktime updates since the first release of Quicktime 7, when this problem arose, and none have made any difference. Reinstalling and uninstalling + redownloading doesn't work, and I am not prepared to downgrade to an older version of iTunes, or buy a Mac. If anyone has any possible fix for this, please post here. I wish Apple would do something about this.

    A permissions glitch I think, Marz, masquerading as the Export Controller thing we saw a reasonable amount of a few versions ago. (I just checked the wife's 64-bit Vista lappie, and the QuickTime Player Start menu shortcut should have a run as administrator in the right-click menus ... whether that's part of your permissions trouble or a seperate business isn't clear, I'm afraid.)
    The bulk of those "Export Controller" errors got fixed by an update to Apple Application Support, but I was involved in an epically long-running thread back then where we found that for a rare subset of them: (a) Run as administrator would launch the QuickTime Player without the message, and (b) in other admin user accounts on the same PC, the QuickTime Player could be launched normally without the message.
    Since then I've seen a few other similar user-account-specific issues (with different error messages) where the same run-as-administrator trick gets you past the troubles. The precise error message seems to depend on which file/folder/key your user account loses a permission on.
    Finding the dodgy permission can be a pain ... I don't have a reliable technique for that. But one workaround you might want to try is using the QuickTimePlayer.exe compatibility tab to set the Player to always run as administrator. (Unfortunately, it's usually a bit more reliable a workaround on 7 than it is on Vista.)
    Quit the QuickTime Player if you have it open. Track down the QuickTimePlayer.exe file again, right-click and select "Properties". In the Compatibility tab, select "Run as administrator" and click OK.
    Try launching the Player again ... does it launch without the Export Controller error? Or do you instead get one of the error messages described in the following document?
    [Error -2096 message when opening QuickTime for Windows in Compatibility Mode|http://support.apple.com/kb/TS1875]

  • I found a solution for my "iTunes has stopped working" problem

    iTunes was opening ok but would only play music; if I tried doing anything else like importing music or even navigating around it would crash with a "itunes has stopped working" message and shut down.
    I uninstalled and reinstalled iTunes twice with no luck. I searched for hours for a solution and finally figured it out.
    What the problem was is a corrupt user profile. I determined this by creating a new user account on my computer, opening itunes under this new account, and doing the things that would make it crash under my original account.
    Since it worked fine under my new account, I had to then transfer all of my user profile info from my previous account to my new one. Which is kind of a pain in the butt but not too bad.
    There are instructions for doing this on the Microsoft site. One thing to make sure if that you setup the new account as an admin (the way I did it, per the instructions, was to setup a third account that transferred the files from the original to the new account) and to share all files under the user profile with "Everyone" so that they can be copied and transferred. I did have trouble trying to copy all of the files at once and paste. It didn't work. So I ended up copying individual folders and pasting them into the new account. You only need to do this with the folders that contain your individual data, e.g. My Music, My Pictures, etc. The way I figured out which folders and files to transfer was trying to open them under the new account. If they wouldn't open, they didn't need to be transferred. Anyway, rely on Microsoft instructions for this, I'm not a computer wiz myself.
    Hope this helps someone because it took me a couple of days to figure it out!

    Adobe CS4 products were never meant to be transferred. It breaks the licensing and you get this error.
    There is a License Recovery tool for the Mac, download that from:
    Error "Licensing has stopped working" | Mac OS
    For OSX 10.7 and above you can try fixing it using the Python Script and Terminal app. If you succeed, this will save you from Plan B, reinstalling Photoshop and illustrator plus all the updates.
    So basically
    Open Terminal
    Type sudo and leave a space
    Then download and unpack the LicenseRecovery111 dmg.
    Inside you will find the License Recovery folder and inside that you will see "LicenseRecover.py
    Drag LicenseRecover.py into the Terminal Window and press "enter"   You should see this:
    Enter your admin password. Ignore the fact that the cursor does not move and press Enter again.
    Follow the instructions, and when done, you can quit the Terminal.
    It should then be repaired. Try starting your programs.

  • "Adobe Setup has stopped working" problem with XP, not Vista

    Adobe has posted a tech note to work around the "Adobe Setup has stopped working" for Vista:
    http://kb2.adobe.com/cps/408/kb408524.html
    However, I am having almost the same problem with Windows XP SP3.  I have tried installing and updating using both an admin class user and the actual Administrator.  At first I thought it might be related to Symantec EndPoint until I saw the Vista thread, but I get the same problems even with EndPoint not on the machine.  The posted technote (which seems oddly written by the way.. mentioning junctions AND folders?!?) does not cover XP, only Vista.  My attempts to translate it over to XP procedures does not get very far.
    The install goes fine, but any subsequent updates for the suite fail.  Once the failure occurs, InDesign and other apps will refuse to open.  I can't even right-click a file in Windows Explorer or it also results in a crash (I am guessing to the CS Drive and Bridge additions to the contextual menu).  The main apps that fail to update appear to be the same ones mentioned for Vista:
    Adobe Drive and Services update (aka Version Cue client 4.0.1, Creative Suite Infrastructure 1.0.1)
    Adobe Version Cue Server 4.0.1 update
    Flash Lite 3.1 Update for Adobe Device Central CS4 (aka Device Central 2.1)
    Adobe Output Module update for Adobe Bridge CS4 (aka Output Module 2.1)
    Extensions Manager CS4 2.1
    Screenshots of the errors are here:
    http://drop.io/tlzrsif
    Luckily we use drive images for our systems so I can hop back to a freshly prepped notebook with out much delay, but given the long CS4 install time this has become a pain to try to solve.
    Have any others run into this problem using XP and not Vista?

    here you go
    Problem signature
    Problem Event Name: APPCRASH
    Application Name: iTunesHelper.exe
    Application Version: 7.3.1.3
    Application Timestamp: 468d67e8
    Fault Module Name: QuickTimeStreamingAuthoring.qtx
    Fault Module Version: 7.2.0.240
    Fault Module Timestamp: 4684a83a
    Exception Code: c0000005
    Exception Offset: 00016c09
    OS Version: 6.0.6000.2.0.0.768.3
    Locale ID: 1033
    Additional Information 1: 18fe
    Additional Information 2: f42ba5cd8b2ed31f18b99a5ea46137af
    Additional Information 3: 4735
    Additional Information 4: ae0a749503b699b3b75d581a3dbfd557
    Extra information about the problem
    Bucket ID: 466198587

  • "iTunes has stopped working" problem

    Hello everyone!
    When I opened my iTunes this morning, a dialog box that says "iTunes has stopped working" appeared. I tried to reboot my PC and reinstall iTunes but still the problem continues to show up. Can anybody help me?
    Here are some that may help you figure out the solution. Im using Vista btw
    Problem signature
    Problem Event Name:    APPCRASH
    Application Name:    iTunes.exe
    Application Version:    10.3.1.55
    Application Timestamp:    4deec351
    Fault Module Name:    StackHash_f4c9
    Fault Module Version:    6.0.6001.18538
    Fault Module Timestamp:    4cb733dc
    Exception Code:    c0000374
    Exception Offset:    000b0dbc
    OS Version:    6.0.6001.2.1.0.768.3
    Locale ID:    1033
    Additional Information 1:    f4c9
    Additional Information 2:    b4dfd03f46348f2e4333ae06a0f014f6
    Additional Information 3:    b7a9
    Additional Information 4:    af571f1efb4d64250a40363c4d77e983
    Hope to hear from someone soon!

    You're welcome, Renzo!
    The aftershocks continue, sadly. Some parts of the eastern suburbs are having to be abandoned, because the damage from the liquefaction effect would take several years to remediate (assuming that we don't get any further large 5s or 6s). Our house is okay, but services keep getting damaged after the large shocks.
    Can't really tell when it's going to be over, too. Canterbury is situated over a mosaic of North-South-running and East-West-running faults created about 50 million years ago. They've mostly been dormant for a long time, but after the big quake in September a bunch of them have been destabilised. So they keep popping (which is what produces the ongoing big aftershocks).

  • Firefox has stopped working Problem Event Name: BEX

    <blockquote>Locking duplicate thread.<br>
    Please continue here: [[/questions/934592]]</blockquote>
    hi my firefox internet wont start up, when i try a fire fox has stopped working panel comes upThe following comes up in my microsoft windows fire fox has stopped working panel, please help me out im not awesome at using computers but can follow directions, thanks
    Problem signature:
    Problem Event Name: BEX
    Application Name: firefox.exe
    Application Version: 14.0.1.4577
    Application Timestamp: 5000b729
    Fault Module Name: LVPrcInj01.dll
    Fault Module Version: 11.80.1048.0
    Fault Module Timestamp: 488b3c09
    Exception Offset: 00006074
    Exception Code: c000000d
    Exception Data: 00000000
    OS Version: 6.0.6001.2.1.0.768.3
    Locale ID: 3081
    Additional Information 1: cd21
    Additional Information 2: 01d9174c762f08c4addf02cfdc2dd662
    Additional Information 3: 5f3e
    Additional Information 4: f33234e8bd4e4c7a45cfb8b872a5e602

    The lvprcinj01.dll mentioned in the report is part of Logitech QuickCam
    Try to contact Logitech support for help.
    *http://forums.logitech.com/t5/Webcams/bd-p/quickcam_software

  • A fix to speaker not working problems on Macbook/Macbook Pro

    I've had problems for about a week where my Unibody Macbook incorrectly detected a digital output device in the headphone jack. I found a solution I didn't see discussed in any of the threads here.
    I use the Sennheiser MM 60ip headset. These have an integrated microphone and 4-prong switch; they work with my Mac and 2g iPod Touch. After using them extensively, my Mac thought that I had a digital output device connected whenever I unplugged my headset.
    I went through the steps suggested by Apple Support: power cycling with battery removed, resetting PRAM and NVRAM, etc. At a genius bar appointment, the tech plugged in a pair of regular Apple earbuds. After disconnecting them, my Mac worked correctly! I am now back to using the same Sennheiser headset, and the speakers work correctly when I disconnect them from the headphone jack.

    Does it now work only on battery? or using the power supply?
    If only on the power supply use a grounded plug.
    Otherwise try reseating touchpad cable. Post the size and year of your MBP.

  • UPDATED: I am so close to getting it working, Problem description and Code

    Hello to the SDN community, I am a new member and I am very inexperienced with Java. I am writing a simple photo album application that will compile and run, but not really run how I would like it to. I am sure the code is not as pretty as more experienced Java folks are used to, but I am learning.
    What I would like it to do is scroll the albumName and caption Strings to the left. When those two Strings reach the left edge I would like the current photo to begin scrolling left and out of the screen while the new image simultaneously begins to scroll left into the screen from just outside the right edge towards the left edge. When the new photo begins entering the screen the new albumName and caption strings appear at the original position at HCENTER and then begin scrolling left.
    The main help that I need is with the myPaint() method I think, I can't figure out how to make it work the way I just described. I can post some other versions of the method if anyone would like to see what I have tried.
    Am I in need of adding more methods to the code below, or is there a way to alter this code to get the desired results? Also, if this code is written badly, please let me know (maybe suggest improvements). I am new to programming in Java and j2me. Any advice and insight will be greatly appreciated
    Best Regards,
    Jason
    I have all kinds of versions of the myPaint() method, I can't get any that will perform the way I am trying to make it work.
    The code below is very close to performing as stated. The problem with it is the next image to be displayed does not scroll in from the right as the previous image scrolls out to the left, it just pops up in the middle of the screen.
    import javax.microedition.lcdui.*;
    import javax.microedition.lcdui.game.GameCanvas;
    public class PhotoCanvas extends GameCanvas
            implements CommandListener, Runnable {
         /******* Variable declarations removed to save space/time *******/
         * constructor
        public PhotoCanvas() {
            super(true);
            exitCommand = new Command("Exit", Command.EXIT, 0);
            addCommand(exitCommand);
            setCommandListener(this);
            initPhotos();
            initParam();
            start();
        public void initPhotos() {
         /******* Loads the images into the Image[] photo array and the captions into the String[] captions array. *******/
        public void initParam() {
            if (curSlide > 2) {
                curSlide = 0;
            nextStrX = getWidth() / 2;
            nextImgX = getWidth() + (photo[curSlide].getWidth() / 2);
            if (firstRun == true) {
                strX = getWidth() / 2;
                imgX = getWidth() / 2;
            } else if (firstRun == false) {
                strX = getWidth() / 2;
                imgX = getWidth() / 2 + (photo[curSlide].getWidth());
            aniImage = false;
            nextString = false;
            change = false;
        public void start() {
            if (animation == null) {
                animation = new Thread(this);
            animation.start();
        public void run() {
            Graphics g = getGraphics();
            try {
                while (exitFlag == false) {
                    changeStrX();
                    if (aniImage) {
                        changeImgX();
                    myPaint(g);
                    Thread.sleep(30);
            } catch (Exception ex) {
                System.out.println("Error in run()");
                ex.printStackTrace();
         * paint
        public void myPaint(Graphics g) {
            //Clear Display
            g.setColor(255, 255, 255);
            g.fillRect(0, 0, getWidth(), getHeight());
            //Draw current Image according to index
            g.drawImage(photo[curSlide], imgX, getHeight() / 2,
                    Graphics.VCENTER | Graphics.HCENTER);
            //Set the caption font
            Font f = Font.getFont(Font.FACE_PROPORTIONAL, Font.STYLE_BOLD,
                    Font.SIZE_MEDIUM);
            g.setFont(f);
            //Draw the current caption according to the index
            g.setColor(255, 0, 0);
            g.drawString(caption[curSlide], strX, 300,
                    Graphics.HCENTER | Graphics.BOTTOM);
            g.drawString(albumName, strX, 0, Graphics.HCENTER |
                    Graphics.TOP);
            if (nextString == true) {
                g.drawString(albumName, nextStrX, 0, Graphics.HCENTER |
                        Graphics.TOP);
                g.drawString(caption[curSlide], nextStrX, 300, Graphics.HCENTER |
                        Graphics.BOTTOM);
            if (nextImage == true) {
                g.drawImage(photo[curSlide], imgX, getHeight() / 2,
                        Graphics.VCENTER | Graphics.HCENTER);
            flushGraphics();
        public void changeStrX() {
            strX -= 2;
            if (strX <= 0) {
                imgX -= 2;
                aniImage = true;
                nextString = true;
        public void changeImgX() {
            imgX -= 2;
             * If the left side of the image has reached
             * the left edge of the screen
            if (imgX + photo[curSlide].getWidth() / 2 <= 0) {
                nextStrX -= 2;
                curSlide += 1;
                nextImage = true;
                initParam();
    }Please offer constructive criticism and suggestions as I am trying to learn.
    Thanks
    Edited by: newbie_dev on Oct 9, 2009 8:17 AM
    Changed code

    Anyone?:

  • Air Flex with work problem in swfLoader...

    Hello,
    I have a problem with swfLoader in Air Flex. I create a swf flash that must be loaded into Air application. When I run it insde of Flex Builder, all is ok. But when I install it, the embed flash dont work in component "InputText" and the TextField (in mode "InputText")... Simply I cant click in this and keyboarding... The problem dont is in SandBox...
    Thanks,
    Jonathan

    Due to some reason  the text input fields used inside the flash presentation are not editable only  when the application is running on installed AIR.
    When the flash  presentation is loaded in Flex it is not allowing the user click inside or edit  the text input, to over come this we are setting the focus to text input field  when ever the user clicks on it so that the cursor focus is set inside the text  input field and user will be able to enter data.
    Below is the code  change implemented in flash.
    inputText.addEventListener(MouseEvent.MOUSE_DOWN,  setFoucusToTextInput);
    function  setFoucusToTextInput (e:MouseEvent)
                stage.focus  = inputText;

  • 'Content not working' problem on BBC and elsewhere

    Wonder if any kind and expert people could help here?
    System: Lenovo laptop, Win XP SP3 32bit, all updates installed. Main browser Firefox with add-ons including Adblock and Ghostery. Broadband via TalkTalk (after they bought up the original ISP I signed up for!) via a BT Business Hub router, usually connecting wirelessly. Comodo firewall installed, no other 'security' stuff running..
    Problems: started around 7/8/9ish Jan 2013 after working fine for ages. Not sure what triggered it - there were Windows, Acrobat and possibly a few other automatic updates going in around then, maybe also FireFox going to 18.
    Problem is with on demand video:
    BBC iPlayer - any show - spins for a bit then comes up "this content doesn't seem to be working"
    Error code - EMP v.3.0.0.r617463_618125_4  Playlist URL : http://www.bbc.co.uk/iplayer/playlist/p012msym/ Error code : 
    CDNRedundancyManagerError [0] : null
    BBC news website clips - any - spins for a bit then comes up "this content doesn't seem to be working"
    Error code  - same as iPlayer
    BBC radio player - says 'loading' for a bit then does nothing.
    ITVplayer - plays an ad then 'resume' button comes up but it won't play, 'resume' just reappears.
    Youtube - videos play but takes several seconds to start buffering, much slower than usual
    BUT video playing via e.g. Guardian website seems to work fine.
    I've tried googling CDNRedundancyManagerError and searching for any related problems, and then tried everything suggested, e.g. at
    http://forums.adobe.com/message/4022210
    http://ubuntuforums.org/archive/index.php/t-1939039.html
    but nobody seems to have an answer and all made no difference:
    - Broadband speed tests - these show around 2Mb/s as usual. Iplayer diagnostic showed the 'streaming 1' test at zero one time, but then it was around 2Mb/s like  the others on subsequent tests.
    - Cleared Firefox browser cache and history
    - Restarted FF in safe mode
    - checked 'allow third party storage' is on in Flash settings. Also tried it with and without hardware acceleration (right click in Flash player and also in Firefox options).
    - /etc/hosts file is original Windows one with no changes.
    - uninstalled Flash and reinstalled current Flash 11.5 (freshly downloaded)
    - Full clean uninstalled Flash as per Adobe instructions and reinstalled 11.5
    - Clean uninstalled and tried Flash Beta 11.6
    - Clean uninstalled then tried Flash 10.3
    - Then put 11.5 back on
    - Turned off firewall
    - In firewall, whitelisted Firefox and plugin container
    - Installed Chrome and tried that - exactly the same behaviour as Firefox.
    - Connected laptop to router via ethernet cable not Wifi
    - Tried another XP computer, connecting by wifi to the same router - same problem. Rarely use this machine so not sure how long it had the issue.
    - Tried a Windows 7 laptop connecting by wifi to the same router - works properly no problems!
    - On original laptop tried a system restore to a week ago when known working - system restore failed, 'no changes made to original system'.
    So, I'm a bit flummoxed.
    - Can't be the router as the Win7 laptop works OK.
    - Can't be the ISP throttling streaming video as the Win7 laptop works OK.
    - Can't be the Wifi on the XP machines as connecting by ethernet makes no difference.
    - Unlikely(?) to be Flash as the Chrome version has same problems as Firefox, and also installing various versions made no difference.
    - Not the firewall as turning it off makes no difference.
    - Not the Firefox add-ons as (a) turning them off in safe mode makes no difference and (b) Chrome also affected
    So what can it be? Any ideas anyone?
    Thanks in advance for any help. Will respond quickly with further info or results of further tests. Cheers Pete

    Good idea - but sadly there was no change in safe mode. I agree something in XP does sound like the culprit...
    I suspect it may be quite hard to reproduce - similar error reports from users are fairly thin on the ground, and I'd expect many more if all XP systems were affected. Everything also plays fine on an XP machine I have at work (different router and ISP, but it's got much the same software on and has had all the same updates).
    I'm in the UK BTW as you clearly guessed!
    As to a URL - just try any of the video clips on the BBC website or try playing anything via iPlayer - they all behave the same as far as I can tell. e.g.
    http://www.bbc.co.uk/news/uk-21039157
    http://www.bbc.co.uk/iplayer/episode/b01pz9m7/Locomotion_Dan_Snows_History_of_Railways_Epi sode_1/
    both give the 'content not working' with CDN redundancy etc error just now. Incidentally several of the Google hits for that error were for people trying to access the BBC via various VPN services/proxies... wonder if that's an indication I'm running into some error whereby the BBC don't know I'm in the UK?
    for ITV player see e.g.
    https://www.itv.com/itvplayer/lewis/series-7/episode-2-down-among-the-fearful-part-2
    It prompted me for a location - either via me typing a postcode or letting the browser tell them the location. Choosing the latter came up 'unknown' so I had to enter the postcode...
    So I wonder if it's an issue whereby my IP address (or whatever) isn't being properly tied to a UK location. I would assume that's usually an ISP issue, although the fact that the Windows 7 machine works would seem to contradict this...
    Region is set as UK in the XP 'Regional and Language' control panel...
    Finally I've just noticed that another on demand service seems to be working OK: e.g.
    http://www.channel4.com/programmes/the-big-bang-theory/4od#3456419

  • ClearInterval() not working, problem with scope

    Hi.
    I have the following javascript code:
    var ivScroll;
    function scrollHoriz (nScrollX)
    if (window.scrollX < nScrollX) {
    window.scrollBy(10, 0);
    } else {
    clearInterval (ivScroll);
    function scrollMe (nScrollX, nInterv)
    nInterv = setInterval ("scrollHoriz("+nScrollX+")", 10);
    When I do scrollMe (300, ivScroll), the part where it should
    clear the interval doesn't work. I've checked and it does get to
    the else clause, so the problem is that the ivScroll variable being
    used is not the one I defined globally. I'm fairly new to
    javascript, so can someone please solve this scope problem for me?
    Thank you.
    João

    Try starting your computer in Safe Mode (holding down the Shift key while restarting) then see if the computer will sleep.  If it will sleep, then restart your system and repair your permissions with disk utility. 

  • 'Skype has stopped working' problem

    Hi,
    For some unknown reason my Skype has started refusing to work.
    As soon as load it up it logs me in then briefly shows me my contact list for a few seconds before a pop up appears saying:
    'Skype has stopped working
    Windows is checking for a solution to the problem...'
    After another few seconds the pop up changes to saying
    'Sype has stopped working
    A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.'
    I had a look around on google and tried some suggestions but none have worked. I have uninstalled and reinstalled skype about 5 times so far. Twice using previous version of Skype but even they don't work.
    Any help would be appreciated!
    Currently running Windows 7
    Attachments:
    skype.png ‏15 KB

    <script>// function f(e){ if (e.className=="ci"){if (e.children(0).innerText.indexOf("\n")>0) fix(e,"cb");} if (e.className=="di"){if (e.children(0).innerText.indexOf("\n")>0) fix(e,"db");} e.id=""; } function fix(e,cl){ e.className=cl; e.style.display="block"; j=e.parentElement.children(0); j.className="c"; k=j.children(0); k.style.visibility="visible"; k.href="#"; } function ch(e){ mark=e.children(0).children(0); if (mark.innerText=="+"){ mark.innerText="-"; for (var i=1;i<e.children.length;i++) e.children(i).style.display="block"; } else if (mark.innerText=="-"){ mark.innerText="+"; for (var i=1;i<e.children.length;i++) e.children(i).style.display="none"; }} function ch2(e){ mark=e.children(0).children(0); contents=e.children(1); if (mark.innerText=="+"){ mark.innerText="-"; if (contents.className=="db"||contents.className=="cb") contents.style.display="block"; else contents.style.display="inline"; } else if (mark.innerText=="-"){ mark.innerText="+"; contents.style.display="none"; }} function cl(){ e=window.event.srcElement; if (e.className!="c"){e=e.parentElement;if (e.className!="c"){return;}} e=e.parentElement; if (e.className=="e") ch(e); if (e.className=="k") ch2(e); } function ex(){} function h(){window.status=" ";} document.onclick=cl; // </script>
    + <Event xmlns="http://techypapa.blogspot.in">
    - <System>
      <Provider Name="Microsoft-Windows-HttpEvent" Guid="{7b6bc78c-898b-4170-bbf8-1a469ea43fc5}" EventSourceName="HTTP" />
      <EventID Qualifiers="32768">15301</EventID>
      <Version>0</Version>
      <Level>3</Level>
      <Task>0</Task>
      <Opcode>0</Opcode>
      <Keywords>0x80000000000000</Keywords>
      <TimeCreated SystemTime="2015-01-10T18:45:15.689555100Z" />
      <EventRecordID>1903</EventRecordID>
      <Correlation />
      <Execution ProcessID="4" ThreadID="48" />
      <Channel>System</Channel>
      <Computer>Amit-PC</Computer>
      <Security />
      </System>
    - <EventData>
      <Data Name="DeviceObject">\Device\Http\ReqQueue</Data>
      <Data Name="SocketAddress">[::1]:26143</Data>
      </EventData>
      </Event>

  • HT4623 i update my iphone with itunes but my phone is having a net work problem,it keep teling me no service and when i conect it to itunes it says no sim card when there is sim card

    i am having an iphone 3 and it need a softwareupdate which i did on itune.(download and instaled) but i still problems with my phone

    Has your iPhone been jailbroken or modified to work with
    other than the original wireless carrier?

  • Light Room 4 plugins will not work, problem validating.

    I bought LR 3 on Ebay, apparently with a bad serial number,  so I bought LR 4,per instruction in the plug in manager page.  Problem is plug ins will not work,  error msg says serial number is bad.  Support says serial number is good but can not fix it..  Support sent me to a link to download latest LR 4, of course this would not work.  Support says that is all they can do as they only support LR 5???
    Any ideas, maybe registry edit, some hidden file in win 8.1 ????

    Geoff
    See Jeffrey Friedl's Blog » Plugin Registration : "I do not permit the use of my plugins on pirated copies of Lightroom" and you can find other comments in this post Jeffrey Friedl's Blog » Lightroom 3 Released; Update on my Plugins (search the page for the word "pirate"). I've also seen much more recent private (hint) comments along the same lines.
    John

Maybe you are looking for