Working with External Time Code Sync

Hi,
We shot using a timecode generator. Is there a way in FCP to change the timeline so that the timecode matches that of the t/c gen we used. Basically, how do I change the starting timecode.
Thanks

Sequence > Sequence Settings > Timeline Options > Starting Timecode

Similar Messages

HT201250 My 10.7.3 Time Machine won't work with external disks. Worked fine with Snow Leopard, and even Lion 10.7.1

My 10.7.3 Time Machine won't work with external disks. Worked fine with Snow Leopard, and even Lion 10.7.1
I have tried everything, even buy new external disk from different manufacture.
If I cant get a fix soon, I am downgrading back to SnowL.

Still no luck. I tried all the tricks, reconfiguring TM (remove selected disk option, and re-setting it, and trying different disks). Tried new combo updater, and the newer TM update after that. Tired two different disks too (one is my older firewire WD MyBook 1TB, and my brand new 3tb Seagate GoFlex USB... either one plugged into back of computer - no intermediary devices). I did get the TM buddy wiget and it produced the following log, from the last attempt, where I setup lots of exclusions so that backup quantity was small (under 10gb). Still it failed to complete. Here is that log, for what it is worth:
Starting standard backup
Backing up to: /Volumes/TM-Disk/Backups.backupdb
9.56 GB required (including padding), 911.15 GB available
Waiting for index to be ready (101)
Copied 0 files (0 bytes) from volume Mac HD.
Backup canceled.
To prove a point, I will take these disks are run them on my other Tiger and Snow Leopard laptops to prove TM works fine on those with these disks. But I fear the only options are to either have my tech re-install LION... or just have him reinstall SL instead. Im at wits end.

How to make AEC work with external webcam?

Hi everyone.
What I'm trying to do is to make AEC work with external webcams. My target: flash in browser and desktop AIR app.
I have the following situations:
1. Laptop Lenovo S400, really not the best laptop, with MIC placed right above the speakers. But... AEC works excellent!
2. PC with Logitech 1080p webcam (which has stereo microphones) and external speakers. But... AEC doesn't work at all. It even doesn't try to reduce any speakers sound in microphone data.
3. The same laptop with connected Logitech camera and again - AEC doesn't work.
In each situation I use absolutaly the same environment(Win7, target player - 11.9, Flex 4.6.0 SDK), code, compiller, etc..
And I was unable to find any info for such situation.
Does anybody have experience with such problem? I will be really grateful for any help.
Here are parts of code:
// somwhere early...
_microphone = Microphone.getEnhancedMicrophone();
// called before we attach microphone to NetStream
private function _setMicrophoneMode():void
            _microphone.setLoopBack(false);
            _microphone.framesPerPacket = 1;
            _microphone.setSilenceLevel(0, 2000);
            _microphone.codec = SoundCodec.SPEEX;
            _microphone.encodeQuality = 10;
            _microphone.gain = 50;
            _microphone.rate = 44;
            if (_useEchoSuppression)
            var options:MicrophoneEnhancedOptions = _microphone.enhancedOptions;
            options.mode = MicrophoneEnhancedMode.HALF_DUPLEX;// using this for external webcams
            options.echoPath = 128;
            options.nonLinearProcessing = true;
            _microphone.enhancedOptions = options;
            } else
                _microphone.setUseEchoSuppression(true);
                trace(_microphone);

I think that with the current state of the Adobe AIR Adobe FLash platforms, there is too much work to do to get echo cancellation to work on all platforms, and to get video to work as expected too. I think Adobe could solve many of these issues by implementing native WebRTC into the AIR platform, see this post here:
http://forums.adobe.com/message/6232094#6232094

How do I set up OpenDNS to work with my Time Capsule running 7.7.3 in Bridge Mode?

How do I set up OpenDNS to work with my Time Capsule running 7.7.3 in Bridge Mode?

Set up your "main" router to use the OpenDNS servers, and the Time Capsule will automatically pick up those settings. No configuration is needed on the Time Capsule.

TS1253 I have a printer epson TX210, but it doesn't work with my time-capsule. What need to do?

I have a printer epson TX210, but it doesn't work with my time-capsule. What need to do?

What have you tried?
You are going to get nowhere quick with the 6.1 utility in Mountain Lion if this is the only OS you have available.
Look up how to install 5.6 utility under ML. At least then you can see printers. That is assuming you are trying to use USB.
Has this worked ever on Mountain Lion? Did you download the drivers for that printer for ML?
Plug it into a computer directly.. does it work? If it doesn't work locally it sure will not work via the network.

Why Model MD297AE/A is not working with Fcae time and Model MD293C/A is working in UAE with Facetime

Why Model MD297AE/A is not working with Fcae time and Model MD293C/A is working in UAE with Facetime.
In fact I have given my iPhone to my daughter to use in Canada (purchased from UAE ISP) she is unable to use Face Time within Canada. ?
Is it possibile to activate FaceTime in Canada if iPhone is purchase from UAE.
Purchase under Points by ISP (No contract)
Thanks
Abbas

Hello sir
I agree what u replied for the above question, but because of the UAE request, you cannot deactivate the facetime completely from this iphone, they should stop working through SIM network. The iphone is a universal mobile which can travel all over the world, many tourist people will suffer due to that, pls re-consider in taking back and try to make it upgrading this software.
Thanks
SATHISH KUMAR

Existing Apple ID is not longer working with Face Time and Message on the iPhone after iOS 6

After the IOS 6 update on my iPhone the Apple ID is not longer working with Face Time and Message. Each time I try to log in I receive the message that the password or the user is not right. But they are, because on all other devices and all other parts of the iPhone (iCloud, AppStore, iTunes) they are working. Other Apple IDs are working fine.
What's wrong? Any idea?
Thanks

Blue
It sounds like you restored from an old back-up. Did you back-up just before your software update? It will use your last one and if your last back-up was a ywear old then it will use that one.
In general, if you are getting these messages on your iPhones select logout (when you get that Apple Id request) and then log back in with your newer ID.
Sorry for your losses.
Cheers

Problem ,working with UNTIL TIME..

hi
i have a serious problem when issuing UNTIL TIME commends.
Such as this command in RMAN:
run {
backup
(archivelog from time '02-OCT-06 09.00.00'
until time '03-OCT-06 21.00.00');
or working with UNTIL TIME in point-in-time recovery .
it gives me this error:
ORA-01830: date format picture ends before converting entire input string
i have had this problem for a long time and i haven't found a solution for it.
i will be grateful if anyone can help me beat this problem

Try this:
run {
set until "to_date('01-10-2006','dd-mm-yyyy')";
Best Regards
Krystian Zieja / mob

HP 4330s SRS Premium Sound not working with External Speakers

And this is my second topic and rant!
The SRS Premium sound driver doesn't work with USB Speakers.
It doesn't work with Bluetooth speakers either!
In other words it only works with the Laptop speakers.
ARE YOU KIDDING ME!
SRS Premium sound for Deeper Bass and Clear sound enhancement bla bla bla now in you HP Laptop
but ONLY with your LAPTOP SPEAKERS!
ARE YOU KIDDING ME!
DEEP BASS on these cell phone speakers!!! Really???
Why doesn't the SRS Premium Sound driver work with external speakers!
I believe I have used SRS Sandbox before and ALL THE SOUND was directed to that driver and it worked with everything!
WHY DOESN'T YOUR HP DRIVER WORK WITH EXTERNAL SPEAKERS!
Is everyone in HP a bloody RETARD?
FIX YOUR DRIVERS!
End of rant!

Oh BTW {Content Removed: rant} http://www.srslabs.com/landing.aspx?id=693#23
23. Will the SRS Audio Sandbox work with my USB speakers or Bluetooth speakers?
Yes, the current version, 1.6.6.0 will work. If you have a previous version that is not working with these speakers, please upgrade to this version.
Do you have anything else to share with me {Content Removed: rant}

Does Times Ten work with External Flash array

Does the Times Ten In Memory DB support external Flash Arrays or is it completely dependent of Internal Memory. I was told it did not support it in the past, as this changed recently.

TimesTen supports normal RAM for primary storage and 'disk' (or anything that presents as a disk, such as SSD etc.) for persistent storage. There is no explicit support for any other kind of storage. If the O/S had the capablility to present an external Flash Array as normal RAM then in theory it would work with TimesTen. But of course it would be far, far slower than RAM so there is probably little benefit in doing that even if it were possible.
Chris

+shift+ delete and +delete not working with external keyboard...

Most of the time, when I try to send a file to the trash or empty the trash using the keyloard shortcuts, it will only work if I use my laptop keyboard but not my external apple keyboard hooked up to it. Ocassionally it will work with my external keyboard, but most of the time it wont.
Does anyone have similar problems to this or know how to fix it?
Thanks in advance!
-Isaac
MacBook Mac OS X (10.4.7)

The only other thing I can think of is that the Finder can sometimes be slow in updating its view of reality. This is a perennial gripe about OSX. So maybe the issue is not the keyboard, but the Finder itself. Are you a fast typist? Try taking 3 deep breaths before using these key combos the next time you try to delete. Maybe that will let the finder catch up.
I only suggest this because, otherwise, the problem is pretty inexplicable.

Working with external fonts and director

Hi,
when working with UTF-8 fonts or other big fonts compiling
can be such a
pain. When having multiple big fonts I could go and get me a
coffee
every time I compile my flash movie.
I use textfields for every font format I use so I could use
it as linked
library member but it does not work when using it in
director.
Does anyone know a solution to this? How to avoid compiling
big fonts?

Hi MK,
No, maybe I didn't express it precisely
It's not about the DB or its vendor, it's about the DB schema.
You can of course reuse the system JDBC driver to create a DS to this external DB, however it cannot be Open SQL (Open SQL is available only with the system DB schema)and therefore usage of SQLJ is not possible with it.
Hope it makes more sense now!
-Vladimir

Time Code Sync Problem

I am new to final cut, and have been having a very tough time with a project that I am working on. In short, I am attempting to create a music video, and I began by laying the music tracks down first. As I go to cover the music with video, the video that I lay over the music is about two to three seconds off from the time code in which I set an in point on the source material.
As you can imagine, this is giving me quite a headache as I have to back-time my in point on the source material to accommodate this error. The same glitch is occurring with other projects as well. Although I am new to final cut, I am experienced with other programs, and have never had anything of this nature happen, especially with such a basic project.
Any help would be greatly appreciated!

Yes, thanks for your interest. I began by laying down the audio tracks on channels one and two. When editing video over the tracks, I set an in and out point on the timeline, and drag my video material into the viewer display. I then set an in point on the raw video, and select "overwrite" in the canvas display.
At this point, the clip will drop to the timeline and display a thumbnail corresponding to the clip in which I set an in point. When I render the video, and look at the timeline, the video is two to three seconds ahead of what I had marked as an in point.
I have experimented with this by starting a new project and simply setting an in and out point on the source material and adding it to an empty timeline. As before, the video will be offset by a couple seconds.
Thanks for your feedback!

Lenovo E535 blank display but works with external VGA

I have a Lenovo E535 where the LCD display is completely blank. It works with an external screen connected to the VGA port. Using the F6 key to toggle between displays makes no difference. The AMD Vision Engine Control Centre only detects the external display. The Lenovo hardward tests do not detect any problems with graphics.
So I thought it must be a problem with the LCD panel itself and I have replaced it. The new one does not work either (so that was a waste of money!)
Does anyone have any ideas on what to try next?

Welcome to the Lenovo Community !
Have you tried booting the computer into the BIOS Setup to see if there is a screen display? That would circumvent any operating system related problems.
Other possibilities...... Bad video cable. A used one on eBay would be a cheap thing to try. Less than $10 (U.S.) Especially if the laptop you are working on had loose hinge problems or is frequently opened and closed.
A bad LCD replacement is another possibility.
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

Sleep not working with external screen in clamshell mode

I have my macbook with Lion operating in clamshell mode with an external display connected as the main screen.
Although I have set the computer to sleep after 10mins, this never happens and I have to sleep the computer manually every time.
If I disconnect the external display, or open my Mac and work with both screens, the computer does sleep properly after the set time.
I can't seem to find the fix anywhere, and the people in the mac store couldn't help me either.
Can anyone help please?
Thx,

How to disable the closed-clamshell mode?
I think, this is what you're looking for ... maybe you want to uproot that question.

Working with External Time Code Sync

Similar Messages

Maybe you are looking for