Working with iScript example

I've been playing with the iscript example from:
http://www.erpassociates.com/peoplesoft-corner-weblog/xml/open-peoplesoft-queries-from-excel.html
Eventually, I want to broker data back to Excel for users without access to Oracle on the desktop using their PS security profile and running a query through the PeopleCode and not using PS Query or nVision.
Dropped in the code and the special XML libraries into a derived work record, including declaring the functions, and setup security per the article, but when I run it I get:
Could not open registry. Registry name: ExecQuery
PTools 8.49 in and 8.9 environment. Is it time to bounce the app server or do I need to do something else? Will this code run in an 8.49 environment?
Edited by: user9535225 on Feb 29, 2012 6:07 PM

Hi,
What is the full url your are trying to initiate?
url should be something like this
http:/[machine]:[port]/xmllink/[site]/ExecQuery?userid=[]&pwd=[]&runservice=yes&qryname=[]&type=public&OPRID=[]
make sure you are not copying the url from the brower address which starts with
http:/[machine]:[port]/psp/[site]

Similar Messages

User exit work with small example

will someone show how to make user exit work with small example and sceenshot? i do not want legthy explanation /hard examples,only a stepwise example.
points will get reward
email:[email protected]

Go to transaction CMOD
Create a project called ZVA01
Choose the Enhancement assign radio button and press the Change button
In the first column enter V45A0002 Predefine sold-to party in sales document . Note that an
enhancement can only be used i 1 project. If the enhancement is allready in use, and error message
will be displayed
Press Save
Press Components. You can now see that enhancement uses user exit EXIT_SAPMV45A_002.
Double click on the exit.
Now the function module is displayed. Double click on include ZXVVAU04 in the function module
Insert the following code into the include: E_KUNNR = '2155'.
Activate the include program. Go back to CMOD and activate the project.
Goto transaction VA01 and craete a salesorder. Note that Sold-to-party now automatically is "2155"

Anyone got the SimpleCertAuthenticator example working with 5.1??

The SimpleCertAuthenticator example that does the client certificate to user
mapping doesn't seem to work. I followed the instructions and tried many
times
without luck. Any comments? Like where to look for error messages? Thanks.
Honbo

I got the example working on wls 5.1 using sp8 both in Linux and NT.
Try to print something in the SimpleCertAuthenticator constructor, because the
SimpleCertAuthenticator is instantiated during startup, be sure that you can see
the startup so that you can verify if the handle has ben installed correctly.
"Jayesh Patel" <[email protected]> wrote:
It also not working for me.
I have tried using both 6.0 sp1 as well as 5.1 sp8 .
Let me decribe what I did and let me know if I am missing any thing -Thanks
1) Installed personal certificate(from verisign)
3) Enforced client cert in console
2) exported CA file and pointed in clientRootCa
3) created user with emailId in cert
4) set cet authnticator to examples.security.cert.SimpleCertAuthenticator
5) Restarted server
6) invoked one servlet using https , browser propmpted for certificate,
but
thereafter it
says page can not be displayed. Unfortunately I don't have error
mesage
to know what
went wrong? I tested with same request with not ssl connection it
works.
i also put
systme.out.println in SimpleCertAuthenticator and it fails before
it.
"Peter S. Wong" <[email protected]> wrote in message
news:[email protected]..
Have you tried using it with the jaas example?
It works with that example in 6.0sp1.
Peter S. Wong
Honbo Zhou wrote:
The SimpleCertAuthenticator example that does the client certificate
to
user
mapping doesn't seem to work. I followed the instructions and triedmany
times
without luck. Any comments? Like where to look for error messages?Thanks.
Honbo

Why my DELETE not WORK with BULLKCOLLECT ?

Cursor Cur_Del (p_AnoMes IN varchar2) IS
SELECT A.OBJECTID
FROM mytable A
WHERE A.YEAR_MONTH = p_AnoMes;
OPEN Cur_Del(p_YEARMONTH);
LOOP
          FETCH Cur_Del BULK COLLECT INTO v_obj_tab LIMIT 200;
          FORALL i IN 1 .. v_obj_tab.COUNT
          DELETE FROM CIRCUITSOURCECUSTCLASS_DB WHERE OBJECTID = v_obj_tab(i);
          COMMIT;
          EXIT WHEN Cur_Del%NOTFOUND;
END LOOP;

SQL> create table mytable
2 as
3 select l objectid, '20060' || to_char(mod(l,2)+1) year_month
4    from (select level l from dual connect by level <= 1000)
5 /
Tabel is aangemaakt.
SQL>
SQL> create table circuitsourcecustclass_db
2 as
3 select l objectid from (select level l from dual connect by level <= 1000
4 /
Tabel is aangemaakt.
SQL>
SQL> create type muttleychess_type as table of number;
2 /
Type is aangemaakt.
SQL>
SQL> select year_month,count(*) from mytable group by year_month
2 /
YEAR_MONTH
                              COUNT(*)
200601
                                   500
200602
                                   500
SQL>
SQL> select count(*) from circuitsourcecustclass_db
2 /
                              COUNT(*)
                                  1000
SQL>
SQL> declare
2    Cursor Cur_Del (p_AnoMes IN varchar2)
3    IS
4    SELECT A.OBJECTID
5    FROM mytable A
6    WHERE A.YEAR_MONTH = p_AnoMes;
7    v_obj_tab muttleychess_type;
8 begin
9    OPEN Cur_Del('200601');
10    LOOP
11      FETCH Cur_Del BULK COLLECT INTO v_obj_tab LIMIT 200;
12      dbms_output.put_line(v_obj_tab.count);
13      FORALL i IN 1 .. v_obj_tab.COUNT
14      DELETE FROM CIRCUITSOURCECUSTCLASS_DB WHERE OBJECTID = v_obj_tab(i);
15      COMMIT;
16      EXIT WHEN Cur_Del%NOTFOUND;
17    END LOOP;
18 end;
19 /
200
200
100
PL/SQL-procedure is geslaagd.
SQL>
SQL> select count(*) from circuitsourcecustclass_db
2 /
                              COUNT(*)
                                   500So it seems to work.
A couple of remarks:
- Please change the datatype of p_AnoMes to a date or maybe a number
- Please post everything next time, because we can only guess what exactly does "not work" with your example.
Regards,
Rob.

Freezing projector image while working with the computer behind the freeze

Hi!
I want to write a program that can freeze the image (screen) sent to the projector so that I can change things in the application behind the freeze before sending the new image instead. Where do I begin? Is there a way to control projectors?
/ D

Unless you are talking about some sort of special device (although I don't know of any) most projectors simply display whatever is on the screen. So if you try to bring up another window to work with, for example, it will also appear on the projector's output.
You may be able to do something using a split screen-type setup where one screen displays the intended projector output and the other is for your control. I have never tried this but am pretty sure it can be done in Java because I have seen references to it before. The trick would be getting the projector to display the appropriate screen, I suppose.

How do you copy, for example I work with blue prints and I want to copy a section and copy into another new page?

How do you copy, for example I work with blue prints and I want to copy a section and copy into another new page?

Forgot to add that it would be an adjustment layer with some kind of mask on it already. The mask is uncentered when copy and pasted which throws it off.
I guess the same question would go towards doing the same for an object. How to copy and paste it over to a new doc, keeping its position within the document? is this possible?

Any examples that work with a PCI-6733?

I've been looking for a LabView example VI that has a very simple front panel for working with motors. I just got a PCI-6733 and haven't been able to find a real world example. Such as a motor starting, and doing something. If you know of one plz point me the the right direction.

Thanks, I can use the AO vi's.

Geting remote management example work with 1.5 jconsol.exe

Hello, I had a difficulty getting remote manegement exaple work with jconsole.
I follow the guidence of:
http://java.sun.com/developer/technicalArticles/J2SE/jmx.html
Working with HTTP adaptor going fine,
Tring to invoke example with jconsole.exe produces exception (the situation happens unsing jre 1.4 and 1.5):
the code:
public class Server {
    public static void main(String[] args) {
        try {
            // Instantiate the MBean server
            System.out.println("\nCreate the MBean server");
            MBeanServer mbs = MBeanServerFactory.createMBeanServer();
            // Create a JMXMP connector server
            System.out.println("\nCreate a JMXMP connector server");
            JMXServiceURL url = new JMXServiceURL("jmxmp", null, 5551);
            JMXConnectorServer cs =
                JMXConnectorServerFactory.newJMXConnectorServer(url, null, mbs);
            // Start the JMXMP connector server
            System.out.println("\nStart the JMXMP connector server");
            cs.start();
            System.out.println("\nJMXMP connector server successfully started");
            System.out.println("\nWaiting for incoming connections...");
        } catch (Exception e) {
            e.printStackTrace();
}consol:
Create the MBean server
Create a JMXMP connector server
Start the JMXMP connector server
JMXMP connector server successfully started
Waiting for incoming connections...
20/03/2007 10:54:51 GenericConnectorServer ClientCreation.run
WARNING: Failed to open connection: java.io.StreamCorruptedException: invalid stream header
java.io.StreamCorruptedException: invalid stream header
     at java.io.ObjectInputStream.readStreamHeader(Unknown Source)
     at java.io.ObjectInputStream.<init>(Unknown Source)
     at com.sun.jmx.remote.socket.SocketConnection$ObjectInputStreamWithLoader.<init>(SocketConnection.java:354)
     at com.sun.jmx.remote.socket.SocketConnection.readMessage(SocketConnection.java:204)
     at com.sun.jmx.remote.opt.security.AdminServer.connectionOpen(AdminServer.java:76)
     at com.sun.jmx.remote.generic.ServerSynchroMessageConnectionImpl.connect(ServerSynchroMessageConnectionImpl.java:58)
     at javax.management.remote.generic.GenericConnectorServer$ClientCreation.run(GenericConnectorServer.java:405)
     at com.sun.jmx.remote.opt.util.ThreadService$ThreadServiceJob.run(ThreadService.java:208)
     at com.sun.jmx.remote.opt.util.JobExecutor.run(JobExecutor.java:59)Any ideas ?
10X
Message was edited by:
KIRPICH79

Hi,
We belive that you used the default connector RMIConnector in your jconsole to connect your JMXMP connector server.
What you should do is to:
1) start your jconsole with the jmxmp classes:
jconsole -J-Djava.class.path=JAVA_HOME/lib/jconsole.jar:JAVA_HOME/lib/tools.jar:jmxremote_optional.jar
(see http://java.sun.com/javase/6/docs/technotes/guides/management/jconsole.html)
2) specify your server url address in the jconsole connecting window:
service:jmx:jmxmp://boat:5551
you should substitue "boat" to your host name
3)connect
Hope this helps and let's know if you still have problem.
Shanliang JIANG
SUN JavaSE/JMX team

Need guidance for working with the available example labview VI

Hello,
I'm working with the pulse signals and the pulse signals will be effected by the motion artifacts.There is similar thread available on labview here Adaptive filtering to cancel out noise from an pulse signal for removing the motion artifacts from pulse signals.so,I am planning to use the vi posted in the thread as LMS block by block(example) with sampling rate of 100Hz and number of samples needed=100 using DAQPad-6015/6016.
But I am confused with the channels of DAQ as the author(who bulit this vi) says the channel0 for signal and channel1 for reference signal as shown in the attached image.
1)If channel1(aio) of DAQ is feeded with the analog input of pulse signals then what is the input needed/feeded to the channle1 of DAQ.
2)Can I directly use the vi by changing the sampling rate of 100hz and number of samples=100 or anything else is needed for this requirement.
Can someone explain me the required input to the channels and settings with the DAQ. thanks.
Attachments:
LMS_example.JPG ‏127 KB

Hello,
can someone explain how the DAQ channels settings are to be done.
thanks.

HT4972 hi one of the main important questions which this site didnt answer to it is: whats the latest version of ios which any device work with it for example i have a ipad 1st and i dont know whats is the latest version of ios for this device thanks

hi one of the main important questions which this site didnt answer to it is: whats the latest version of ios which any device work with it. for example i have a ipad 1st and i dont know whats is the latest version of ios for this device

Google "iOS versions" and read the first match (Wikipedia)........

Does anyone knows a way to work with various Pages documents at the same time, for example with a system of tabs to switch directly from one document to the other?

Hello everyone,
Working with numerous Apple Pages documents at the same time, I am looking for an efficient solution to switch faster from one document to the other. Integrating all them in a single framework, for exemple by switching from one to the other with a system of tabs would be of great help. Does anyone knows if such a possibility exists?
Thanks in advance,
Jean-Baptiste

jbp- wrote:
Thanks. It works and is very efficient. Not as much as a real system of tabs, but is allows to switch very fast between different documents. Only regret I would have is that it doesn't work with a document which is on full page mode. But that's already very helpful!
You're very welcome but Peggy really gave you the answer already.
With regard to the full screen apps, I don't think Apple have yet worked out how to make them elegantly coexist with other apps. The closest you can get is the four finger swipe gestures you may use on a trackpad if you have one (Mission Control and App Exposé).
In fact nowadays I use the App Exposé (four finger swipe down gesture) more often than I use Command-Accent to move between documents in the same app (when not in full screen). It also as the advantage of showing you thumbnails of recently opened documents below the ones already open within the app. If you haven't tried it, I suggest you give it a whirl.
I can't remember now but I think the four finger gestures are not enabled by default and you must switch them on in System Preferences > Trackpad > More Gestures.

Does anyone have an example of a c++ TCP/IP client that works with labview TCP?IP server ??

I have the labview TCP/IP client/server working fine, but now I need to do this were labview is the TCP/IP server and the c++ program is the client. Does anybody have a simple C++ TCP/IP client that works with labview TCP/IP server ????

Thanks, you were right, we modified the c++ program to include the port # in the IP address and it worked.We also forgot to convert the port #. I included my labview and c++ program.
Attachments:
TCP-IP.llb ‏47 KB
client.exe ‏40 KB

Bluetooth No Longer Working With Headset

I have a Motorola bluetooth headset that I've used with my ibook before without a hitch, but when I screwed up OS X and reinstalled it (note: reinstalled the operating system, but didn't format) it no longer works with the headset. I can connect to it just fine, but if I try to use it for anything such as switch my audio output to the headset, the program will freeze - same applies to using the headset for input. The headset isn't broken as it works fine with my phone, but my ibook won't cooperate and they are paired correctly. Is their someway to reinstall the bluetooth drivers or something to that extent? Thanks

jrnet154 wrote:
Hi - I'm a student with disabilities and rely heavily on accessibility features that make my life easier. For example, I use a Bluetooth headset to trying answer phone calls and use Siri… I especially use the "Raise to speak" option for accessing Siri
If you have a headset, why use Raise to speak? Kinda defeats the purpose of the headset.
Press and hold the button on your headest to call up Siri.

Wireless-Card doesn't not work with WPA/WPA2 but with WEP [Solved]

Hello I have a MacBook (late 2007) with a wireless-card from Broadcam, the card works with WEP and the classic configuration over rc.conf very well. But I can't get the card running with WPA and the net network-profiles.
Here is the link to the driver - http://www.broadcom.com/support/802.11/linux_sta.php
eth2 = wireless-card
eth1 = firewireanything
eth0 = wired-card
rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK="UTC"
USEDIRECTISA="no"
TIMEZONE="Europe/Berlin"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
#MODULES=(sky2 snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="macbook"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
eth0="eth0 192.168.1.220 netmask 255.255.255.0 broadcast 192.168.1.255"
INTERFACES=(!eth0 !eth1 eth2)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.1.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
NETWORKS=(wireless)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng network net-profiles netfs alsa crond portmap fam hal)
/etc/network.d/wireless
CONNECTION="wireless"
INTERFACE=eth2
HOSTNAME=macbook
IP="static"
IFOPTS="192.168.1.225 netmask 255.255.255.0 broadcast 192.168.1.255"
GATEWAY=192.168.1.1
DNS1=192.168.1.1
# Wireless Settings (optional)
ESSID=3Com
#KEY=
IWOPTS="mode managed essid $ESSID channel 11"
#WIFI_INTERFACE=wlan0 # use this if you have a special wireless interface
# that is linked to the real $INTERFACE
#WIFI_WAIT=5 # seconds to wait for the wireless card to
# associate before bringing the interface up
USEWPA="yes" # start wpa_supplicant with the profile
WPAOPTS="" # use "" for normal operation or specify additional
# options (eg, "-D ipw")
# see /etc/wpa_supplicant.conf for configuration
Can I set here the WPA/WPA2-Key also? Why here ESSID? Do I need still a configuration in wpa_supplicant.conf?
Thats very confusing and not explained.
WPAOPTS? Do I need to add something like "-D wext"?
/etc/wpa_supplicant.conf
# This is a network block that connects to any unsecured access point.
# We give it a low priority so any defined blocks are preferred.
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=wheel
network={
key_mgmt=NONE
priority=-9999999
network={
ssid="3Com"
proto=WPA
key_mgmt=WPA-PSK
pairwise=CCMP TKIP
group=CCMP TKIP
psk="topsecret"
priority=5
# WPA2
# proto=WPA RSN
I need help. Please
Last edited by hoschi (2009-01-04 20:21:58)

fwojciec wrote:If this info is not in the wiki it might be worth it to add it -- it's all detailed in /etc/network.d/examples/complete.example though.
Thats the reason why I was so confused.
My new and well working configuration:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK="UTC"
USEDIRECTISA="no"
TIMEZONE="Europe/Berlin"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
#MODULES=(sky2 snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="macbook"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
eth0="eth0 192.168.1.220 netmask 255.255.255.0 broadcast 192.168.1.255"
INTERFACES=(!eth0 !eth1 !eth2)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.1.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
NETWORKS=(3com)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng network net-profiles netfs alsa crond portmap fam hal)
CONNECTION="wireless"
DESCRIPTION="Very verbose complete wireless example"
INTERFACE=eth2
HOSTNAME=macbook
# Interface Settings (use IP="dhcp" for DHCP)
IP="static"
IFOPTS="192.168.1.225 netmask 255.255.255.0 broadcast 192.168.1.255"
GATEWAY=192.168.1.1
# DNS Settings (optional)
DOMAIN=localdomain
DNS1=192.168.1.1
DNS2=
SEARCH=
# Standard Wireless Settings
ESSID=3Com
SECURITY=wpa-config # One of wep, wpa, wpa-config, none
KEY=""
# Scans to see if network is available before connecting (reccomended)
SCAN="YES"
# Time to wait to connect to a network. Default 15.
TIMEOUT=10
# Pass *custom* options to iwconfig. Usually not needed (optional)
IWOPTS="mode managed essid $ESSID channel 6 key restricted $KEY"
# Any extra arguments for wpa_supplicant
WPA_OPTS=
# For SECURITY='wpa-config' only - filename of a wpa-supplicant config
WPA_CONF=/etc/wpa_supplicant.conf
# This is a network block that connects to any unsecured access point.
# We give it a low priority so any defined blocks are preferred.
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=wheel
network={
key_mgmt=NONE
priority=-9999999
network={
ssid="Linksys"
proto=WPA RSN
key_mgmt=WPA-PSK
pairwise=CCMP TKIP
group=CCMP TKIP
psk="areulookingatmybreasts"
priority=5
network={
ssid="3Com"
proto=WPA
key_mgmt=WPA-PSK
pairwise=CCMP TKIP
group=CCMP TKIP
psk="nomam"
priority=5
# WPA2
# proto=WPA RSN
There are also profiles for the Linksys-Router and for wired cable.
Thanks for the help!
Last edited by hoschi (2009-01-04 20:21:23)

I am unable to get Thunderbird to work with my exchange email account

I have tried a heap of different configurations including using ExQuilla with no success. I will provide the insrtuctions I received for accessing my account using outlook.
I hope you can help, as I find Thunderbird a great platform, and really don't want to go back to Outlook.
*Note – the instruction at step 5 is fairly important. It is easy to miss it and hit “check name”. Don’t – It’ll piss you off no end.
Let me know how you go.
Using Outlook via the Internet
If you are using Microsoft® Office Outlook® 2003, you can connect to the computer running Windows® Small Business Server through the Internet using the feature called RPC over HTTP. This means you can remotely access your server e-mail account from the Internet when you are working outside your organization's firewall. You do not need security-related hardware or software (such as smart cards or security tokens), and you do not have to establish a virtual private network (VPN) connection to the server.
Comparing RPC over HTTP and Outlook Web Access
When using RPC over HTTP to access your mailbox, you get the full functionality of Outlook 2003. For example, you can work offline, use Microsoft Office Word 2003 as your e-mail editor, and easily organize your mailbox.
To use Outlook via the Internet
Ensure that the following requirements have been met on the client computer:
Verify that the computer is running Microsoft Windows XP Service Pack 1 or later
• Click Start, right-click My Computer, and then click Properties.
The version of the operating system and service pack is displayed under System. If you do not see a service pack version, there is no service pack installed.
Verify that Windows update Q331320 is installed on the computer (not required if you are running Windows XP Service Pack 2 or later)
1. Click Start, click Control Panel, and then open Add or Remove Programs.
2. Under Currently installed programs, search for the item Windows XP Hotfix (SP2) Q331320.
3. If the item is not present, go to the Microsoft Web site (http://go.microsoft.com/fwlink/?LinkId=18651) and follow the instructions to download and install it.
Verify that the computer is running Outlook 2003 or later
1. Open Outlook.
2. Click the Help menu, and then click About Microsoft Office Outlook. The version number appears at the top of the box.
Verify that the computer trusts the certificate used by the server
1. Open Internet Explorer, and then in the address bar type:
https://vpn.alaea.asn.au/remote
• If the certificate is trusted, a certificate warning does not appear. In this case, continue with step 1 under Ensure that you have an Outlook profile configured for the server.
• If the certificate is not trusted, a warning appears. Click View Certificate, click Install Certificate, and then follow the instructions.
Ensure that you have an Outlook profile configured for the server
1. Click Start, and then click Control Panel.
• If you are viewing Control Panel in the default Category view, switch to Classic view, and then double-click Mail.
• If you are viewing Control Panel in Classic view, double-click Mail.
2. In the Mail Setup dialog box, click Show Profiles. If your profile appears in the list, select your profile, click Properties, click E-mail Accounts, select View or change existing e-mail accounts, and then click Next. If your profile does not appear, open Outlook and follow the instructions to create a profile before proceeding.
• If Microsoft Exchange Server does not appear in the list, the existing profile is not associated with a Microsoft Exchange Server e-mail account. Click Cancel, and then click Close. Continue with step 3 to add a profile.
• If there is an existing Microsoft Exchange Server profile, continue with step 3 under Configure the computer for RPC over HTTP.
3. Click Add. The New Profile dialog box appears.
4. In the Profile Name box, type a name for the new profile, and then click OK. The E-mail Accounts dialog box appears.
5. Under E-mail, select Add a new e-mail account, and then click Next. The Server Type dialog box appears.
6. Click Microsoft Exchange Server, and then click Next.
7. Continue with step 4 under Configure the computer for RPC over HTTP.
Configure the computer for RPC over HTTP
1. Click Start, and then click Control Panel.
• If you are viewing Control Panel in the default Category view, switch to Classic view, and then double-click Mail.
• If you are viewing Control Panel in Classic view, double-click Mail.
2. In the Mail Setup dialog box, click E-mail accounts, click View or change existing e-mail accounts, and then click Next.
3. In the E-mail accounts dialog box, click Microsoft Exchange Server, and then click Change.
4. In the Microsoft Exchange Server box, type the local name of the Exchange server:
alaea-sbs1.alaea.alaea.asn.au
5. In the User Name box, type the user name that you use to log on to the Remote Web Workplace. Do not click Check Name.
6. In the Exchange Server settings page, click More Settings.
7. On the Connection tab, under Exchange over the Internet, select Connect to my Exchange mailbox using HTTP, and then click Exchange Proxy Settings. The Exchange Proxy Settings dialog box appears.
8. Under Use this URL to connect to my proxy server for Exchange, type the following URL:
vpn.alaea.asn.au
9. Select Connect using SSL only, and then select Mutually authenticate the session when connecting with SSL.
10. In the Principal name for proxy server box, type the following text:
msstd:vpn.alaea.asn.au
11. Select On slow networks, connect using HTTP first, then connect using TCP/IP.
12. Under Proxy authentication settings, select Basic Authentication.
13. Click OK, and then click OK again. Click Next, and then click Finish. Click Close.
14. In the Mail dialog box, if Always use this profile is selected, choose the newly configured profile.
15. Open Outlook and type your Windows Small Business Server user name (in the format ALAEA\user name) and password. You can now work with your Outlook mailbox.

Sheesh. That looks hard. I think it will fall over at this point:
"Connect to my Exchange mailbox using HTTP" 'cos Thunderbird uses only the regular email protocols: POP, IMAP and SMTP.
Here (at work) we have in the past have had IMAP and SMTP enabled on our Exchange server so Thunderbird could then connect just like to any other regular internet-based service.
With the change here to outlook365/outlook 2010 I've had to switch to using DavMail which lets Thunderbird talk to the mail server using OWA.
I haven't (seriously) tried Exquilla. Whilst I have great respect for its author and some of his other add-ons, I saw no reason to use an add-on that required payment when DavMail works for free.

Working with iScript example

Similar Messages

Maybe you are looking for