Working with reports

Calling a jasper report we have to give the path+filename of the .jrxml file. Which is suitable for standalone application. But when calling the jasper reports in a web application which is not possible. Is there a way to get the reports session vice?
Thank you...............

Lets say your web application name is webapp1 and you have placed your jrxml(jasper_eg.jrxml) file in report folder of webapp1, then you can give the path of jrxml in compileReport asJasperCompileManager.compileReport(
getServletContext().getRealPath("/report")+"/jasper_eg.jrxml");

Similar Messages

Debit/Credit Shift not working with report painter

Dears,
We have defined debit/credit shift while defining financial
statement version. This functionality working well with F.01 however its not
working with report painter results. any help will be highly appreciated
Regards,
FR

Hi Dave,
I have gone back to the books (JP Terry's "Creating Dynamic Forms with Adobe LiveCycle Designer") and think we can improve on things...
var oFields = xfa.resolveNodes("ViolationsText[*].DebitVal"); // looks to resolve the repeating rows (I think)
var nNodesLength = oFields.length; // assigns the number of rows to a variable
var sumTotal = 0; // this is a temporary holding variable for the total, during the loop
for (var i = 0; i < nNodesLength; i++) // this loops through as previous example
     if (oFields.ViolationsText[i].resolveNode("DebitVal").rawValue == "C")
          sumTotal = "";
          i = nNodesLength; // stops the loop
     else
          sumTotal += oFields.ViolationsText[i].resolveNode("DebitVal").rawValue;
this.rawValue = sumTotal;
This would go in the calculate event of your Total Debit Points field. I would be amazed if it worked first time. I haven't run through LC. Give it a lash!! (a try!!)
Good luck,
Niall

Working with Report Designer

Hi,
Can we define Custom Formulas in Report Designer
Any help document avaliable on Working with Report Designer

Hi,
the main advantage of report designer is formatiing the reports as per user requirement like changing heading,footer etc.
http://help.sap.com/saphelp_nw04s/helpdata/en/47/a99a0a5fdb0985e10000000a42189c/frameset.htm
Regards
sivaraju

How can I work with report columns in computation or validation?

Hi all,
I have an updateable report. Bevor submitting canges, I want to do computation or validation on one of the report columns. But a report column is not an item. Is there a possibility to work with report colums?
Thanks, Daniela

Hi Daniela,
Presumably, your tabular form has been created using the wizard?
If so, you might like to slightly change your SQL statement to allow you to access the "display only" columns in the collection.
When you have time, you should have a look at the HTMLDB_ITEM package api documentation as this explains how you can manually construct a tabular form. But for now, for the "display only" column, you need to do something like:
select
other fields,
HTMLDB_ITEM.DISPLAY_AND_SAVE(n,fieldname) columnheading
FROM table
where "n" is a column number - this will become G_F0n in the collection. You should ensure that you use a number that is not being used by an editable field - if you're not sure, do a View Source on a rendered page, and look for name="f01", name="f02" etc - these are the column numbers, pick one that isn't used for your new column.
The documentation says, for DISPLAY_AND_SAVE: "Use this function to display an item as text, but save its value to session state." so this sounds exactly what you need.
Regards
Andy

Which label printers work with Reports 10g?

Hi,
I'm looking to buy a label printer for my application which is Forms/Reports 10g.
I didn't have a lot of luck with Oracle Reports printing to non-standard printers, so any suggestion on what make / model that you have used in your projects is appreciated.
By the way, the Application Server is 10g (9.0.4) installed on a Windows 2003 server machine.
Thanks.

Anyone?

Form Feeder is not working in report printout

Hi Can any one help me in solving this problem.
I am working with reports 10g and TVS HD 945 dot matrix printer.
the paper size is 12 X 8, when i print the report, in the next page is not having the same header space as the first one.
Do i have to make some changes to the printer ?

Hi dear
I am Santosh in New Delhi. Hope you will help me.
I M working with report 10G. My problem is that , I am not able to get normal character printing on Dot matrics printer and character mode report of report 3
Thanks

Error -2146827284 with report generation 1.1.4

Hi. Im working with Report Generation 1.1.4 and I was testing it for exporting data to an excel book. I was making some vi's to learn how to use it and do what I need it for. I need to take two non constant numeric values and save them in an excel table of two columns and graph them. The error comes when I transpose the original matrix, so i can have 2 columns instead of 2 rows in excel. In the picture you can also see that no graph is displayed. If anyone knows has experience doing this kind of activities between labview and excel I would appreciate some help! Thanks!
Attachments:
2 columns table xcel report generation test.vi ‏11 KB
test.JPG ‏165 KB

Why are you turning your array into a matrix? A matrix is not the same thing as an array. (They are related, but are not truly the same thing.)
Turn on context help and read about all the inputs into the charting function. You want to have a 2-D array. You are actually only starting off with a 1-D array. (Which you can't transpose if you wanted to because it is only 1 dimensional). Create a 2-D array of data to feed into the charting function. If you need to transpose that you can. Don't play with matrix transformations, they are rarely used and only for special math operations when they are. Wire up any other inputs to the charting function as needed. The default chart type is xlColumnClustered which I am going to guess is not truly the graph you want. You probably want an XYscatter.

Calendar function not working in report launch form

We are currently using Headstart 6.5.3.1 for 9i. When we invoke the calendar function for a date parameter in the report launch form (qms0012f), we get the error-message ORA-6508: could not find program unit being called in PL/SQL Program Unit qms$calendar.show.
After closing the report launch form and re-opening it again this error message does not appear again and the calendar is shown without any problems.
Does anyone have experience with this error or know the reason why it is occurring?
Regards,
Gert de Boer

Hi dear
I am Santosh in New Delhi. Hope you will help me.
I M working with report 10G. My problem is that , I am not able to get normal character printing on Dot matrics printer and character mode report of report 3
Thanks

Kanban Replenishment Strategy with Reporting Points

I am trying to implement a SAP kanban system with repetitive manufacturing using reporting points. My problem is that when I change the status from empty to full I get error RM086 - GR with backflush not for reporting point logic with automatic GR option. I get this error regardless of control key (auto GR or not auto GR) setting on the routing. I reading SAP help on the subject; I see there is a page discussing replenishment strategy with reporting points which would infer that there should be a strategy with a similar name in configuration for replinishment strategies for in-house prodution. We are on ECC 6.0 and this option is not available in our system. What am I missing???

Hi,
As you are using In House production Replenishment Strategy , You must define Replenishment strategy for reporting points in Configuration as below:
SPRO->Production>KANBAN>Replenishment Strategies>Define In-house Production Strategies>Working With Reporting Points Replenishment strategy you need to define.
Then assigned this defined strategy in KANBAN Control Cycle in PKMC-->Replenishment Strategy->
Choose In-house Production Radio Button and in front of that select the above defined replenishment strategy to work with reporting points.
Hope this helps.
Regards,
Tejas

Problems with reports: parameter screen

I work with Reports Builder 9.0.4.0.21.
When I open some reports, the screen parameters appears with mode and orientation parameters.
I don´t want these parameters and I eliminate these parameters in screen and I saved the report, but when I open and run again the report, the parameter screen with these parameters appears again
May anyone help me?
thanks in advance
Beatriz

Open report in report builder. From report menu, Tools--> Parameter Form Builder, it will open up a window. Scroll down and see if any parameters are checked ( background color of parameter will be in black). click on parameter to uncheck. Press ok, it will open up report editor-paper parameter form. Remove everything on this parameter form (you will only see two parameter form headers, if you have already unchecked everything on the previous screen)

Problems with Reports: REP:6205

I work with Reports Builder 9.0.4.0.21.
When I open a matrix report appears he following message:
REP-6205: el atributo de identificador de la etiqueta rw:headers no es único
(ID attribute of rw:headers is not unique)
I don´t know why, because I´ve created the roprt with the report assistant
May anyone help me?
thanks in advance
Beatriz

Hi,
I´ve read the jsp code and I´ve found some <rw:headers id, but they are different:
rw:headers id="HFPPCTRAMOEDAD35"
rw:headers id="HFNUM35"
rw:headers id="HFPORCEN35"
rw:headers id="HFINDICE35"
rw:headers id="HFSumNumPerPPCNIVEL35"
rw:headers id="HFSumPorcenPerPPCNIVEL35"
rw:headers id="HFSumIndicePerPPCNIVEL35"
What is the problem?
Thanks
Beatriz

Problemas with reports: REP -1247

I work with Reports Builder 9.0.4.0.21.
When I run a report appears the following message:
REP-1247: report contains uncompiled PL/SQL
I´ve created the report, compile and run ok. Then I've saved the report and when I open reports builder and try to execute the report appears the error.
What is the problem? I`ve compiled before saving the report
May anyone help me?
thanks in advance
Beatriz

I compile in pl/sql editor, and the reports run; but when I open the report again, the report is not compiled, and I go to Program->Compile->Whole, and I save the report. When I open the report again it is not compiled.
I don´t have compile option in file->administration, is it wrong?
Thanks
Beatriz

My Labview Report generator is not working with 2013 excel version

Hi All,
My report generator tool kit which was developpend using labview 2011 was workign with excel 2010...after that i installed 2013 excel and the code is not working..
Do i need to enable some setting to work with excel 2013.
Basically this generator tool will copy the charts from excel and paste in power point...Please let me know.
Thanks,
Hareesh

Ah, I understand now - I had assumed you were using the NI Toolkit.
If you're not using the report generation toolkit, did you write your own VIs for communicating with Office or are you using a different toolkit? If you're using ActiveX to communicate with Office it may be that the ActiveX API has changed for Office 2013 - you will probably need to modify your program for the new calls.
Since it wasn't as obvious as I thought with the report generation toolkit, it would help if you posted some code to try and understand what might be happening. Are you getting any errors in your application when you try to use Office 2013?
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets

EMAIL WITH REPORT NOT WORKING

I have the Display version of this report working on line.
Now, I am trying to email the report to the individual requesting
the report. It is getting an error message on the second
<table> saying it contains invalid data. I am working with a
client on Coldfusion 5, so we are NOT using current software.
Can a report even be emailed?
If yes, how do I approach this. I could not find any
previously written problems on this, so it may not even be
possible. The report is much larger that below, but below includes
the error and did not see any reason to attach the entire report.
Thanks for any guidance.
<CFMAIL TO="#Session.SecurityEmailAddress#"
FROM="[email protected]"
SUBJECT="Request Chronology Report"
SERVER="10.130.1.76"
PORT="25"
TIMEOUT="30">
<table>
<tr>
<td width="50">
</td>
<td>
<img src="images/TITLE-AgencyReporting-400-40.gif"
width=500 height=45>
</td>
</tr>
</table>
<table width="600", bgcolor="#ffffff", cellpadding="0",
cellspacing="0", border="3">
<tr>
<td rowspan="3">
<center><img src="images/911logo-1000-1000.gif"
width=120 height=120></center>
</td>
<td colspan="3" height="30">
<cfoutput><center><h2>#Session.InquiryAgencyName#</h2></center></cfoutput>
</td>
</tr>
<tr>
<td colspan="3" height="30">
<center><img
src="images/title-ChronologyReport-400-40.gif" width=400
height=35></center>
</td>
</tr>
<tr>
<td width="*" height="60">
<cfoutput><center><h2>Event Number:
#Session.ChronologyNumber#</h2></center></cfoutput>
</td>
</tr>
</table>
<cfoutput query="GetChronologyList">
<cfset ExtractHdrYear = "#Left(getchronologylist.cdts,
4)#">
<cfset ExtractHdrMonth = "#Mid(getchronologyList.cdts, 5,
2)#">
<cfset ExtractHdrDay = "#Mid(getchronologyList.cdts, 7,
2)#">
<cfset HdrPrintDate =
"#ExtractHdrMonth#/#ExtractHdrDay#/#ExtractHdrYear#">
</cfoutput>
</CFMAIL>

Thats what I did for out mail reports its not super pretty
but.
The action on the form point to a page containing below code
THis page has the CFMAIl and the SQL INSERT on it.
<cfmail to="[email protected]"
from="[email protected]"
subject="New Event Added, #FORM.EventName#"
server="pop3.preventpollution.org"
cc="#MailTo#"
>
Event Name: #FORM.EventName#
StartDate: #FORM.StartDate#
End Date: #FORM.EndDate#
Description:
#FORM.EventDescription#
</cfmail>
<cflocation url="mailer.cfm">
</cfif>
Hope that Helps...
Tom

Exe created with Report Generation toolkit does not work for all users

I created a exicutable with the report generation toolkit and it only works with some of my users. I use microsoft 2007 and anyone that has microsoft 2007 my exe works well. Most of my users that have microsoft 2010 are able to use my program as well. However, there is one user with 2010 and Windows 2007 that cant get my program to work.
Any suggestions for troubleshooting this?
Thanks

The most likely issue is due to the fact that Microsoft changes the ActiveX object model of Office for each version of Office. The Report Generation Toolkit does a pretty good job of handling this, but it is not 100% effective. Search, for example on the "Set Cell Border" function and you will see what I mean. In these cases it's up to you to handle this issue. How you handle it really depends on your situation. For us to provide a more concrete answer you will need to provide further details, such as what toolkit function is "not working" (whatever that means), and who you "users" are. Is this an internal distribution? Are you selling this program? Is this code written for a project with a specific customer?

Working with reports

Similar Messages

Maybe you are looking for