Workitem not sent to agent

Hi all,
I have this problem
A workitem was not sent to the agent. When i check the workflow's log, the workitem has no agent, it is in blank !!!
What could have happened ? Why if the workflow was working fine, suddenly the agent was set to blank ? What can i do to prevent this situation ?
Thanks in advance !

Check the agent assignment defined for the task in the workflow template. May be the role resolution did not return any agent i.e. If you have a function defined to retrieve agents then the function did not return any agents OR If you have a position id defined as an agent then no users are assigned to the position id.
If you want to avoid such situations make sure that the agent determination logic always returns a default agent. This could be the workflow administrator. 2nd option would be to define the task as a general task.
-Kiran
*Please reward useful answers

Similar Messages

Function to get the Agents for the Workitem not the possible agents

Hi Guys ,
To get the user for each scienario we saved it in the ztable. Now i want to show in report the list possible agents assigned to workitem. ts should agents asigned to it ... its can be four or five ....

Try to make use of the FM SAP_WAPI_GET_WI_AGENTS, if at all you want to know the agents with respect to a workitem
and
check the below too
SWL_WI_DISP_ACTUAL_AGENTS
SWL_WI_DISP_EXCLUDED_AGENTS
SWL_WI_DISP_POSSIBLE_AGENTS

SWN_SELSEN Reminders Not Sent

Hi,
I have an issue that new workitems are picked up and sent correctly to the agent. Unfortunately, the reminder notifications are not sent although the Subscription Settings is set to REMINDER_DAYS 1. How can I test the reminder functionality without having to wait a whole day? What do you think is the problem?
Thanks.

No solution found.

WorkItem Not Getting Executed Completely

Hi All,
In my SAP Business Wokplace Iam sending a workitem to the appropriate agent. Now when the agent will execute the Workitem it will open a BSP application and as soon as he finishes the work with BSP application he clicks on a CLOSE button and at that point the BSP application will be closed.
But when he completes the execution of the work item then it should not appear in the SBWP , but here in my case it is still available even after exectuing the workitem , do i need to use any FM 's suggest me.
Can anybody help me regarding this issue.
Thnaks In Adavnce
Thanks
Pavan

Hello Pavan,
Does your workitem have a terminating event? In this case you should raise this even in your BSP application (when clicking on close) by using the FM SAP_WAPI_CREATE_EVENT or the method cl_swf_evt_event=>raise.
Hope it helps
Olivier

Agent resolution does not agree with agents of task

Hi Guys,
I extended B.O-IDOCAPPL to ZIDOCAPPL to catch the inbound error for the IDOC.
The workflow gets triggered correctly when we get the inbound error.
In the workflow i created a custom display method....this is a dialog method. Now when the workflow comes to this point it gives the message in the technical log
" Result of agent resolution does not agree with agents of task" 
Now instead of calling this method if i just put a user decision it shows up fine in the users inbox.
I have tried SWU_OBUF , Refresh from SWUS , Refresh from Inbox
Nothing seems to work, anyidea as to what's happening here ?
Message was edited by:
Abhishek Dhoundiyal

I have tried :
1.) hardcoding user ID
2.) using a role
3.) using WF initiator...
This is set up as a general task......
One interesting observation that i had... (If the below is irrelevant please ignore)
If i run the task via SWUS it executes but still does not evaluate the agents.. and then if i execute the workitem in SWIA it lets me execute...
Now if i trigger the workflow it executes but still does not evaluate the agents but it does not allow me to execute the workitem in SWIA , the technical log says workitem not found.

Workitem not seen in inbox but event is triggered in transaction SWEL.

Hi,
I have created a workflow to create and display a material master using transaction MM01.
My event (created) is getting triggerd when I am creating a material but the same is not seen in my business Workplace.
In display event trace i am able to trace my event and the corresponding workflow.
My business object is BUS1001006.
I am creating a material from MM01 and the workitem is not seen in the inbox.
Can you provide solution for this?
Nitya

Hi,
In workflow log you have option to see the agent list for the workitem.
1.check possible agent for task of that workitem.
2.check the resposble agent for the task of that workitem.
Check the agent list for the workitem in workflow log, if you do not find a agent list ,check whether agents has authorization for transaction code mm01 or not.
if its useful reward points.
Thanks,
D.prabhu

Workflow, workitem redirection - changing the agent

Hi Friends,
Workflow is triggered and workitem is sent to the agent responsible. now the problem is the responsible agent is on vacation.
how can i redirect the workitem to other person,
is there a way to do this?
thanks a lot.
Points will be rewarded.

Hello Kiran,
if the user is alread on vacation, the administrator can use the transaction SWIA to forward the workitem. You can select by the workflow task TS... by workitem id.
To find out, which workitems the user currently has in his inbox, please consult the database table SWWUSERWI.
For the future, each involved person of the workflow should maintain a "substitute" (Workplace>Settings>Workflow-->Maintain Subs.) and active this setting before his vacation.
Best regards,
Florin

CO54: Message is not sent to any destination: Commit Work is getting failed

Hello,
While processing the Messages from XFP to SAP Update is getting terminated due to the use of Commit Work. SAP Note 147467 - Update termination when sending process messages has been referred which is for 4.6C, but we are in ECC6.0.
While processing the message in second iteration Commit Work triggres and Update happens in the data base.
Following Issue is only concerned with Nested HUs
T-Code used CO54
Following are the analysis:
it looks like u201CCreate and Post a Physical Inventory Docu201D is failing in the initial processing because the inventory doc is created when the Transfer Order to the PSA (or the TO from the PSA) is not yet completed (quant is still locked somehow).
CO54, process message category=ZHU_CONS: HU to be consumed is a nested pallet (unpacking/ repacking and TOs to/from) and qty to consume is greater that HU qty in SAP (creation of a physical inventory doc is required).
1. The error occurs while clearing the inventory posting for the physical inventory document.
2. The surprising factor is the u201CProcess Messageu201D is not processed correctly for the first time.
3. Indeed it is successfully processed without any error if you do process it second time.
Error Log from C054 T-Code.
02.08.2010                                         Dynamic List Display                                                1
Type
Message text
LTxt
Message category: ZHU_CONS ---    Process message: 100000000000000621   "Send to All Destinations" Is Active
Message to be sent to destination:
ZHGI ZPP_0285_XFP_GOODSISSUE Individual Processing Is Active
=> Message will be sent to destination (check log for destination)
Message category: ZHU_CONS ---    Process message: 100000000000000621   "Send to All Destinations" Is Active
Message destination ZPP_0285_XFP_GOODSISSUE triggered COMMIT WORK
Input parameters OK, passed to source field structure
Step 0: Now checking if scenario with HU
Step 2: Scenario with HU, Now checking if HU nested
Step 3: HU nested, checking if HU in repack area
Step 4: HU not in repack area, moving it to repack area
HU moved to repack area, TO number 0000000873
Step 5: Depacking nested HU...
Nested HU depacked, HU pallet n°: 00176127111000461994
Steps 6-7: Moving back HUs to supply storage type / bin...
HU 00376127111000462001 moved back to original area with TO number 0000000875
Steps 6-7: Moving back HUs to supply storage type / bin...
No need to move back HU 00176127111000461994 (not in table LEIN)
Step 8: Checking if HU fully used and quantity matches HU system quantity
HU not fully used but picked quantity > HU quantity: inventory necessary
Step 9: Inventory needed, creating physical inventory document...
Physical inventory document 0000000126 created
Step 10: Adding weighted quantity on inventory document...
Weighted quantity entered in document 0000000126
Step 11: Posting rectification in inventory document 0000000126...
Physical inventory document 0000000126 rectified
Error: rectification for doc 0000000126 not updated in DB!
=> Destination ZHGI ZPP_0285_XFP_GOODSISSUE can currently not process the message
=> Message is not sent to any destination
The errors in SM13 for this contain the program SAPLZPP_0285_HUINV_ENH (creating/changing the HUM physical inventory doc). WM Function module L_LK01_VERARBEITEN is also involved.
From SM13, it displays the following piece of code in include LL03TF2M (read the LEIN table=Storage Units table):
WHEN CON_LK01_NACH.
       IF (LEIN-LGTYP = LK01-NLTYP AND
             LEIN-LGPLA = LK01-NLPLA) OR
              NOT P_LEDUM IS INITIAL.
       ELSE.
Das ist der Fall einer TA-Quittierung wo Von-Hu = Nach-HU ist und sofort die WA-Buchung erfolgt. Dann steht die HU noch auf dem Von-Platz, daher darf hier kein Fehler kommen, sondern es wird ein. Flag gesetzt, daß verhindert daß die LE fortgeschrieben wird.
         FLG_NO_LE_UPDATE = CON_X.
        MESSAGE A558 WITH P_LENUM.
       ENDIF.
Translation in English of the German text via Google:
"This is the case where confirmation of a TO source-HU = destination-HU, and now the WA (Good Issue?)- made book. Then, the HU is still on the From-space may therefore come here not a mistake, but it sets a flag that prevents that the LE is updated."
Thanks and Regards,
Prabhjot Singh
Edited by: Prabhjot Singh on Aug 2, 2010 4:39 PM

Hope you have carried out following things in Production ( Please refer to SAP help before actually doing it in production).
1. Transport the predefined characteristics from the SAP reference client (000) to your logon client.
2. Adopt Predefined Message Categories - In this step, you copy the process message categories supplied by SAP from internal tables as Customizing settings in your plants.

Mail not sent from iphone mail app

I tried to send a mail through the mail app through my gmail account. Was shocked that the mail was not sent nor I can find it in any of "sent" or "draft" boxes. And the very disappointing thing about this problem is that there was no errors, and I just knew about 12 hours later from the expected recipient that he did not receive my mail.
#SHOCKING
I hate iOS 7, thus I mat start to hate iPhone and Apple.

Has the Mobile Me account been set up on your iPhone as POP rather than IMAP? If it has been set up as POP then any message sent will not be mirrored. Your Mobile Me account should also be configured as IMAP on all your devices in order to see those messages in your Sent Items folder.
The idea of IMAP is to be device independent such that whatever you do is mirrored on all your devices as they each synchronize with Mobile Me. I suppose you could view the Mobile Me "cloud" as being the main repository. If you delete a message from your Inbox via your iPhone, the next time you connect your Mac that message will not appear in the associated Inbox in Mail.
Does that make sense?
Chris

Email gets queued, but not sent until I login to my account on the server.

This is very strange. Let me explain.
1. Snow Leopard Server 10.6.2 running on an iMac.
2. I have the Mail Service running on the server. I can receive emails without problems.
3. Using my Snow Leopard Server email account, I attempt to send an email to another account (e.g. a mac.com email account).
4a. If I am actively logged into my Snow Leopard Server account *on the iMac* (e.g. via VNC, as long as my desktop is active), the email will arrive successfully. Here are the mail.log messages:
postfix/smtpd\[69030]: connect from \[External Host Address]
postfix/smtpd\[69030]: 942814AD55B: client=\[External Host Address], sasl_method=CRAM-MD5, sasl_username=MyUserName
postfix/cleanup\[69037]: 942814AD55B: message-id=<[email protected]e. com>
postfix/qmgr\[65313]: 942814AD55B: from=<[email protected]>, size=604, nrcpt=1 (queue active)
postfix/smtpd\[69040]: connect from localhost\[127.0.0.1]
postfix/smtpd\[69040]: C611B4AD568: client=localhost\[127.0.0.1]
postfix/cleanup\[69037]: C611B4AD568: message-id=<[email protected]e. com>
postfix/smtpd\[69040]: disconnect from localhost\[127.0.0.1]
postfix/qmgr\[65313]: C611B4AD568: from=<[email protected]>, size=1043, nrcpt=1 (queue active)
postfix/smtp\[69038]: 942814AD55B: to=<[email protected]>, relay=127.0.0.1\[127.0.0.1]:10024, delay=0.25, delays=0.1/0.01/0/0.14, dsn=2.0.0, status=sent (250 2.0.0 Ok: queued as C611B4AD568)
postfix/qmgr\[65313]: 942814AD55B: removed
postfix/smtp\[69042]: C611B4AD568: to=<[email protected]>, relay=smtp-mx005.mac.com\[17.148.17.5]:25, delay=0.48, delays=0/0.1/0.14/0.23, dsn=2.5.0, status=sent (250 2.5.0 Ok, envelope id [email protected])
postfix/qmgr\[65313]: C611B4AD568: removed
4b. If, however, my Snow Leopard Server account is either logged out, or even just "fast user switched" to the Login Window, the email gets queued, but not sent to the external email address. I get the following four messages in the mail.log file:
postfix/smtpd\[69030]: connect from \[External Host Address]
postfix/smtpd\[69030]: B5F574AD582: client=\[External Host Address], sasl_method=CRAM-MD5, sasl_username=MyUserName
postfix/cleanup\[69037]: B5F574AD582: message-id=<[email protected]e. com>
postfix/qmgr\[65313]: B5F574AD582: from=<[email protected]>, size=604, nrcpt=1 (queue active)
4c. The instant I login to my machine at home (e.g. via VNC), the email finishes processing. The below messages are logged, and my external email account receives the email:
postfix/smtpd\[69160]: connect from localhost\[127.0.0.1]
postfix/smtpd\[69160]: 20B244AD5B0: client=localhost\[127.0.0.1]
postfix/cleanup\[69037]: 20B244AD5B0: message-id=<[email protected]e. com>
postfix/smtpd\[69160]: disconnect from localhost\[127.0.0.1]
postfix/qmgr\[65313]: 20B244AD5B0: from=<[email protected]>, size=1043, nrcpt=1 (queue active)
postfix/smtp\[69038]: B5F574AD582: to=<[email protected]>, relay=127.0.0.1\[127.0.0.1]:10024, delay=74, delays=0.1/0/0/73, dsn=2.0.0, status=sent (250 2.0.0 Ok: queued as 20B244AD5B0)
postfix/qmgr\[65313]: B5F574AD582: removed
postfix/smtp\[69163]: 20B244AD5B0: to=<[email protected]>, relay=smtp-mx006.mac.com\[17.148.17.6]:25, delay=0.49, delays=0.09/0.01/0.15/0.25, dsn=2.5.0, status=sent (250 2.5.0 Ok, envelope id [email protected])
postfix/qmgr\[65313]: 20B244AD5B0: removed
I'm very much at a loss here. It's as if the act of logging out (or fast user switching to the Login Window) suspends some process that is required for my email to process. But .... why?
Any ideas? Any additional information I can provide to help figure this out? Fwiw, I used to run Tiger Server (never tried Leopard Server) and never had this problem.
Rob

Looks to me like the anti-virus scanner, amavis. The clue is the line:
postfix/smtp[69038]: 942814AD55B: to=<[email protected]>, relay=127.0.0.1\[127.0.0.1\]:10024, delay=0.25, delays=0.1/0.01/0/0.14, dsn=2.0.0, status=sent (250 2.0.0 Ok: queued as C611B4AD568)
where the 10024 is the default port that Amavis runs on. Postfix is configured to pass mail through this port, and queues the mail until Amavis is available.
My guess, therefore, is that Amavis is set to run under your account rather than under the system, which is why it only runs when you're logged in. Off hand I have no idea how you managed this and that makes it hard to work out how to fix it. I'd start by looking for org.amavis.amavisd.plist in /System/Library/LaunchDaemons, /Library/LaunchDaemons and ~/Library/LaunchDaemons (it should be in the former, but if its in the latter that could explain it.

I updated to iOS 8 on iPhone 5s and now iMessage will not verify my email. It has said "Verifyng" since yesterday, but has not sent a verification email. I checked my iCloud settings for that email address and it shows "pending".

I updated to iOS 8 on iPhone 5s and now iMessage will not verify my email address to use to send/ receive messages. It has said "Verifyng" beside it in settings since yesterday, but has not sent a verification email. I have also tried Adding it as a new email address several times, but get the same outcome. I can still send/ receive texts from my phone number, just not from the email address.
In my iCloud settings under Contact Information for that email address and it shows "pending". When I select "Resend Verification Email" I get "Cannot Connect to iCloud".

Hello, Dorian071.
Thank you for visiting Apple Support Communities.
Here is the best article to reference when experiencing issues with iMessage activation issues.
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Cheers,
Jason H.

I have an Ipad 2 and are having problems sending out emails in one of my email address. I always get a message reading the email was not sent because the server does not allow relaying. This is an email account POP3. I have no such problem with gmail.

I have an Ipad 2 and are having problems sending out emails in one of my email address. This is a POP3 email Account? I always get a message reading that the email was not sent because the server does not allow relaying. I have no such problem with gmail. What could be the problem and how do I resolve this. Is it about settings?
Richard.

Welcome to the Apple community.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

How to extract data from custom made Idoc that is not sent

Hi experts,
Could you please advise if there is a way how to extract data from custom made idoc (it collects a lot of data from different SAP tables)? Please note that this idoc is not sent as target system is not fully maintained.
As by now, we would like to verify - what data is extracted now.
Any help, would be appreciated!

Hi,
The fields that are given for each segment have their length given in EDSAPPL table. How you have to map is explained in below example.
Suppose for segment1, EDSAPPL has 3 fields so below are entries
SEGMENT          FIELDNAME           LENGTH
SEGMENT1         FIELD1                   4
SEGMENT1         FIELD2                   2
SEGMENT1         FIELD3                   2
Data in EDID4 would be as follows
IDOC           SEGMENT                          APPLICATION DATA
12345         SEGMENT1                        XYZ R Y
When you are extracting data from these tables into your internal table, mapping has to be as follows:
FIELD1 = APPLICATIONDATA+0(4)        to read first 4 characters of this field, because the first 4 characters in this field would belong to FIELD1
Similarly,
FIELD2 = APPLICATIONDATA+4(2).
FIELD3 = APPLICATIONDATA+6(2).
FIELD1 would have XYZ, FIELD2 = R, FIELD3 = Y
This would remain true in all cases. So all you need to do is identify which fields you want to extract, and simply code as above to extract the data from this table.
Hope this was helpful in explaining how to derive the data.

How to get a error message when sms is not sent to a mobile no.

Scenario: once po is finally released sms is sent to the respective vendor.This has been done. But, Now the client want to see the error details(i.e, the mobile no. to whom sms i s sent) if the sms is not sent to any mobile no. and also wants a z program through which they can schedule the background job of resending the sms to those no. who have not received.
As i tried a lot with this but unable to go ahead, so plz help me <removed by moderator>
TABLES:LFA1.
DATA : WA_FINAL LIKE ZME_EKKO_RLS ,
 IT_FINAL TYPE STANDARD TABLE OF ZME_EKKO_RLS.
DATA GV_MSG TYPE STRING.
DATA GV(16) TYPE C.
DATA : GV_RETURN TYPE STRING.
DATA: HTTP_CLIENT TYPE REF TO IF_HTTP_CLIENT .
DATA: WF_STRING TYPE STRING ,
RESULT TYPE STRING ,
R_STR TYPE STRING .
DATA: RESULT_TAB TYPE TABLE OF STRING.
*BREAK-POINT.
IF SY-TCODE = 'ME29N'.
IF SY-UCOMM = 'MESAVE' AND I_EKKO-PROCSTAT = '05'.
 SELECT * FROM ZME_EKKO_RLS INTO TABLE IT_FINAL
 WHERE EBELN = I_EKKO-EBELN .
 IF NOT IT_FINAL[] IS INITIAL .
 LOOP AT IT_FINAL INTO WA_FINAL .
 IF WA_FINAL-SSTAT = '02' .
 CONTINUE.
 ELSEIF WA_FINAL-SSTAT = '01' .
 SELECT SINGLE * FROM LFA1 WHERE LIFNR = WA_FINAL-LIFNR.
 IF SY-SUBRC = 0.
 GV = LFA1-TELF1.
 ENDIF.
 CLEAR GV_MSG.
 CONCATENATE 'Dear Sir/Madam, PO No:' WA_FINAL-EBELN ' Dtd:' I_EKKO-BEDAT ' with reference to vendor no:' WA_FINAL-LIFNR 'has been released on you''.' 'Detail hardcopy will be sent to you soon' INTO GV_MSG.
 CLEAR WF_STRING.
 CONCATENATE
 'http://182.18.143.30/sendsms.php?username=edhik&password=194385&'
 'sender=TSIL&mobile='
 GV
 '&type=1&message='
 GV_MSG
 INTO
 WF_STRING.
 CALL METHOD CL_HTTP_CLIENT=>CREATE_BY_URL
 EXPORTING
 URL = WF_STRING
 IMPORTING
 CLIENT = HTTP_CLIENT
 EXCEPTIONS
 ARGUMENT_NOT_FOUND = 1
 PLUGIN_NOT_ACTIVE = 2
 INTERNAL_ERROR = 3
 OTHERS = 4.
 CALL METHOD HTTP_CLIENT->SEND
 EXCEPTIONS
 HTTP_COMMUNICATION_FAILURE = 1
 HTTP_INVALID_STATE = 2.
 CALL METHOD HTTP_CLIENT->RECEIVE
 EXCEPTIONS
 HTTP_COMMUNICATION_FAILURE = 1
 HTTP_INVALID_STATE = 2
 HTTP_PROCESSING_FAILED = 3.
*if sy-subrc = 0.
*call method http_client->get_last_error
*importing
*code =
*message = gv_errortext.
*endif.
 CLEAR RESULT .
 RESULT = HTTP_CLIENT->RESPONSE->GET_CDATA( ).
 REFRESH RESULT_TAB .
 SPLIT RESULT AT CL_ABAP_CHAR_UTILITIES=>CR_LF INTO TABLE RESULT_TAB .
 REFRESH RESULT_TAB .
 SPLIT RESULT AT CL_ABAP_CHAR_UTILITIES=>CR_LF INTO TABLE RESULT_TAB .
 LOOP AT RESULT_TAB INTO R_STR.
 CONCATENATE R_STR SPACE(1) INTO GV_RETURN.
 write:/ r_str.
 ENDLOOP .
 IF NOT GV_RETURN IS INITIAL .
 UPDATE ZME_EKKO_RLS
 SET: SMSTX = GV_MSG ,
 sstat = '01'
 WHERE EBELN = WA_FINAL-EBELN .
 IF SY-SUBRC = 0 .
 COMMIT WORK .
 ENDIF.
 ENDIF .
 ENDIF .
 ENDLOOP.
 ENDIF .
ENDIF.
ENDIF .
Edited by: Vinod Kumar on Aug 1, 2011 2:58 PM

Hi
when you call the webservce to send the sms using the method if it is successful it will return as success and if any issue it will raise the error which you have to handle, but it will not give you confirmation wether sms is sent ,
regards
m.a

Could not initialize activation agent.

Hi All,
I am getting the following error while deploying a bpel process,with a AQ Adapter for dequeuing operations.
BUILD FAILED
A problem occured while connecting to server "10.209.123.25" using port "80": bpel_ReceiveProcess_1.0.jar failed to deploy. Exception message is: ORABPEL-09903
Could not initialize activation agent.
An error occured while initializing an activation agent for process "ReceiveProcess", revision "1.0".
Please ensure that the activation agents are configured correctly in the bpel deployment descriptor (bpel.xml).
oracle.tip.adapter.fw.agent.jca.JCAActivationAgent: java.lang.reflect.InvocationTargetException
at com.collaxa.cube.engine.core.BaseCubeProcess.startAllActivationAgents(BaseCubeProcess.java:370)
at com.collaxa.cube.engine.deployment.DeploymentManager.activateDefaultRevision(DeploymentManager.java:1577)
at com.collaxa.cube.engine.deployment.DeploymentManager.setDefaultRevision(DeploymentManager.java:1536)
at com.collaxa.cube.engine.deployment.DeploymentManager.deployProcess(DeploymentManager.java:886)
at com.collaxa.cube.engine.deployment.DeploymentManager.deploySuitcase(DeploymentManager.java:728)
at com.collaxa.cube.ejb.impl.BPELDomainManagerBean.deploySuitcase(BPELDomainManagerBean.java:445)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor$1.run(JAASInterceptor.java:31)
at com.evermind.server.ThreadState.runAs(ThreadState.java:646)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at DomainManagerBean_RemoteProxy_4bin6i8.deploySuitcase(Unknown Source)
at com.oracle.bpel.client.BPELDomainHandle.deploySuitcase(BPELDomainHandle.java:319)
at com.oracle.bpel.client.BPELDomainHandle.deployProcess(BPELDomainHandle.java:341)
at deployHttpClientProcess.jspService(_deployHttpClientProcess.java:376)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Can somebody throw some light this.
Regards
Ashwini

Hi,
Issue Resolved.
I recreated the whole process,its working fine now.
Regards
Ashwini

Workitem not sent to agent

Similar Messages

Maybe you are looking for