Worklist items distribution to collection specialist

Dear All,
Doubt: worklist item distribution method to collection specialists
Scenario: Specialists are not assigned to the business partner master record,worklist items are distributed by equal distribution method.worklist will get generated on a daily basis.
Today i run the UDM_GENWL program and then distribute the worklist items equally, after that i assign some of the worklist items from one specialist to other specialist(i.e manually), all the specialists has processed their items for the day.
The nextday i once again run the UDM_GENWL program and distribute the worklist items equally.
Question
Now will the program assign worklist items to the same specialist who processed the same yesterday or it will allocate it to some other specialists.
(It may go to the same specialist or different one because the collection group may have 3 or 4 specialists so, the probability of allocation to the same specialist is high)
Whether it will over write all the worklist items with the specialists including manually allocated worklist items with the equal distribution formula.
How the distribution algorithm works..?
Thank you.
Regards,
D vasanth

When the std worklist generation prog runs, first it evaluates the BPs based on coll strategies and then generates the WL entries.. If the BP contains coll spec entry then the WL item gets assigned to that.
For the rest of the unassigned entries, If you employ the std dist procedure of even distribution, the unassigned entries in WL, will be distributed to coll spec with smallest # of WL entries. If the # of entries to each coll spec are same then the next item will be assigned to coll spec with the lowest avg valuation.
If you wish to have the same BP assigned to the same coll spec in every WL generation run then assign it in the master data itself.

Similar Messages

Collection specialists

Do collection specialist need to be created as busines partners? under what role?

You can assign Coll specialist (SAP user-ids) at two levels.
1) at the group level (as mentioned by Mark above) and then during UDM_GENWL assign the worklist entries to coll specialist as per the distribution method defined
OR
2) assign directly in BP record itself. FYI.. this assignment is at the Segment level

Is there any way to select Worklist items by BP grouping?

Hi All,
Our client now needs to select worklist items by BP groups, that is, we would need another selection option in this window:
I highlight that we don´t need to change neither Segments nor Collection Groups, just to group certain customers so that they could be jointly selected when viewing the Worklist.
The option we are trying to use is the functionality availbale at BP Master data:
However, we are not sure if BP Groups can be selected when trying trying to see the Worklist items (first image).
Is it possible to add new selection fields on that Display Worklists window? How?
Does anyone have an idea in order to group a little number of BP so that they can be displayed at the Worklist by its selection?
Many thanks in advance

Hi Wilson,
Its not the Group Icon that you highlighted which is used to group BPs. It is the BUT000-BU_GROUP field. You define the Groups in configuration and while creation of BP you select one. And then as per the logic given by Florent use the BADI UDM_WL_ITEM_DISP_C to populate this field in Worklist and filter based on this field.
Regards
Prateek.

Worklist Items - 0CLM_WL_ITEM fetching incomplete Deltas

Hi All,
I am working with this extractor and it's not extracting all the deltas from the previous day.
Can anyone give me some information as to how this extract works...
Does it only fetch those worklist items which are processed/changed by the specialist??
OR
Does it need to fetch all the worklist items built/created for that day(with new runid) irrespective of whether they were processed or not??
Any inputs would be much appreciated.
Thanks
Rao

Hi All,
Ref: Worklist Items - 0CLM_WL_ITEM fetching incomplete Deltas
I am working with this extractor and it's not extracting all the deltas from the previous day.
Can anyone give me some information as to how this extract works...
Does it only fetch those worklist items which are processed/changed by the specialist??
OR
Does it need to fetch all the worklist items built/created for that day(with new runid) irrespective of whether they were processed or not??
Any inputs would be much appreciated.
Thanks
Rao

How do I get information about items in a collection via REST API?

Hi There -
I am trying to get information, specifically the last comment date, for each item in a collection. I am trying to do this with the REST API. I have tried the following approaches:
/v1/activities/{activity id}/items - This API does not appear to return the items in the colleciton. I get the collection item in the returned XML, but not the items in the collection.
/v1/items/{item id} - I tried using this API with the collection item id, but it does not provide details for the items contained in the collection.
I would ideally like to be able to use an API to get a list of all of the items in a collection, then go over that list to get the most recent comment and comment date in the item.
Any help is appreciated. Code examples are API descriptions would be great.
Thanks and regards,
Rob Stevenson

Hi Robert,
/v1/items/{item-id}/item_data with {item-id} being the ID of the collection item should return an XML containing the item IDs of the items in the collection.
In a second step you can call /v1/items/ with the items IDs of the items in the collection. This should get you the meta data.
Regards,
Rüdiger

Export worklist items into Excel

Hi,
I am trying to export my worklist items of ALBPM into Excel, can anyone guide me.
-

Hello sivam,
If you want ot export all the instances in your workspace, you can use the OOTB feature as pointed out by Ruben.
You need to click on the button next to the views dropdown. The button appears as a page with an inbound arrow.
On clicking the button you will get the output options of exporting your workspace in PDF or CSV format.
Hope this helps.
Regards,
Jaydev Doshi

Collection Specialist - Collections Profile Tab of Business Partner.

Hi,
We are using the SAP FSCM Collections Management module. When I assign the collection profile to the Business Partner on the Collections Profile Tab, the Collection Segment, Collection Group are populated based on the configuration but the Collections Specialist does not get populated.
Can someone please throw some light on this if they have experienced this issue?
Thanks & Regards,
Bhairav Naik.

Hello Mark , actually I dont think that is possible to transfer data related to collection profile (displayed in BP master data for a BP with colletion managemnt role) from Cusotmer master data because this kind of information are not availabe as my knowledge in Cusotmer master
Solution could to transfer all other available data from Cusotmer data to BP and once transferred update mannually the collection profile.
I have seen also a program ( transaction UDM_BP_PROF) to update collection profile automatically, but I did not manage to make it work on a exidting BP.
What do you think about this approach?

Collection Specialist Name table?

Hi everybody,
Can anyone please tell me in which table collection specialist name is stored. I need "Name of specialist " , not collection specialist ID.
In "assign processor to collection groups" config , when I enter collection specialist ID, the name gets automatically populated. i want to know where the field is getting populated from.
Thank you
Donny

Hi,
Use read specialist from table udmbpsegments-coll_specialist and pass the value in "BAPI_USER_GET_DETAIL" to get user name details
Regards
Rinku Bhowal

Excluding Items from Demantra collection

Hi,
Is it possible to exclude the items from being collected to Demantra? Basically, the sales history in Demantra remains, but I don’t want to collect the history going forward.
Thanks
Praveena Dasalakunte

Hi Praveena,
Oracle Demantra does not have the feature of blocking an item as such. But, your requirement can be met using one of the two approaches:-
1. Mark the “Planning Method” of the item to “Not Planned” in Item Master. This would exclude the item from getting collected. With this option, the older history in Demantra would remain (unless you delete it manually) but the new history won’t be collected. Please note that this option would not collect the Item in ODS itself. So, using this option means excluding the item from Other VCP products as well (ASCP, RP, SNO etc).
2.Use the Custom Hooks to manually remove this item in the Demantra Item and Sales Staging table. This would need some development as you may need to have a GUI/table maintaining the list of items to be excluded.
Hope, this helps.
Thanks, Kunal

Status of Item Submitted to Collection Agency = 03

Hi Experts,
By using TCODE - FP03 we can do management of submitted items. Now my question is when and how status of Item submitted to Collection Agency will become '03'? '03' basically stands for receivable paid by collection agency.
Any business process/transaction will be really helpful.
Thanks.

I think transaction FP03F & FM 'FKK_COLL_AGENCY_UPDATE_STATUS' can actually help me in this case.
I found some info regarding transaction: FP03F. Business Process =
File received to collection agency -> receivables collected -> file sent to SAP -> FP03F -> Status updated to '03'.
Please correct me if I am wrong. Thanks.

Form distribution and collection by e-mail alone?

I am trying to set up an automated system for data collection via Acrobat-generated forms. But, the respondents are in rural Africa and have at best lousy internet access and can barely manage e-mail. Do the form distribution and collection functions of Acrobat work when using e-mail back and forth alone, or is a connection to Acrobat.com required?
Thanks

Yes, it can work if the forms are sent by email. The idea is they are sent to you, and you use Acrobat to add them to Tracker. Or you can not use Tracker and just manage the data yourself.

ESS Timesheet - Worklist items with hours

Hi All,
While working with ESS in time sheet, I see worklist with hours like below screen shot.
If I select any of these worklist items, hours are being transfered as maintained in worklist. From where are these hours are coming by default into worklist? how to change those hours?
Thanks! Babu

hours are previously recorded times on these attributes, you can check customization in CAC1 for your cats profile also, are you using any CATS exit? Please check

GOA item distribution

Dear all,
I am trying to use a BADI and check GOA item distribution data. In particular I need to get plant code.
In BBP_PD I can see that plant GUID is in table BBP_PDDEP but I can not find a connection between item GUID and this table. Can somebody advise how can I access this table?
kind regards,
Robert

I feel that you can read all GOA details using FM <BBP_PROCDOC_GETDETAIL>.
Just populate I_OBJECT_TYPE = BUS2000113
and I_Read_flags as per need.
There is no point in exploring links when you have SAP given FM.
You can also see where used details for above FM to use it in proper way.
Regards,Nishant

In Firefox Add-ons Themes, how do I place the items in My Collections in the order of my choice?

In Firefox > Add-ons > Themes, how do I place the items in My Collections in the order of my choice, rather than the default?

Hi Yanele, I think they display in the order that you installed them. However I have never tried to move the folders of each add on in the profile folder. I do know that in the Profile Folder there is an addon.json folder. This is where the list of add ons populate. However there is also other information that has the file path information to make the add ons function. (manifest file)
It is possible to manually edit the order in that file, however it is not recommended because it could break. I would recommend giving feedback and suggesting the order customization if you would like. If you have any questions about this we are happy to help.

[JS CS3] How to reach a item in a collection of pageitems whom label is the same ?

Hi,
I had a look through the forum and I didn't find any topic on it.
I have several pageitems whom label is the same : "LogoBox"
I can have interesting info such as
b app.activeDocument.pageItems.count("LogoBox")
So I can know how many iterations I have
But now I want to apply a function for any instance and then I just don't get success to access element.
app.activeDocument.pageItems.item("LogoBox")[0] fails
And don't see any lead ? A idea ?
Loic

Hi Robert,
As I was afraid of that, I have to built a array of pageitems through a loop that analyses any pageitems and its own label.
that's a pity that the "whose" command doesn't exist and that we can't create collections based on specific datas.
Loic

Worklist items distribution to collection specialist

Similar Messages

Maybe you are looking for