Worksheet imported to Portlet gives No Data Found

I’m having a problem on being able to import a Discoverer worksheet within a portlet. I build the worksheet in Discoverer and am able to successfully generate results. However after importing into Portal and attempting to run a query I get no data found from the query. I’m also using a simple parameter form that has 5 values. One of the values is a parameter used in a condition that must match with a column in the database that is made up of a character and a number, i.e. A1, A2, etc. Whenever I attempt to generate the report without the use of this particular parameter, the report appears even though it is not the true result that I want. I realize that this description is rather generic but if anyone has run into the same issue it would be helpful to know what the problem was. I.e. having a worksheet give correct results in Discoverer Plus but not getting the expected results when imported to a portlet perhaps with using a simple parameter form.
I’m using Discoverer Plus 10.1.2.1 and Portal Builder (i.e. Application Server 10.1.2).
Thanks,
Ken

Hi SYR,
Pick Slip report gives you out put as NO DATA FOUND, is basically, bcos there has not been any picking of the item, reason may be,
1. Qty avaialble wont be reservable and transactable
Check in Inventory> On handqty > click availibility tab
And see whether the item is available to transact & reserve.
If you have enought qty thn you shld be able to pick release tht item.
2. Check which sub inventory are you using while pick release, is it the same as where the item is kept.
Try this out.
This may help.
Thanks
Manoj

Similar Messages

  • Pick Slip report gives 'No Data Found' output

    Hi All,
    Problem Statement:
    Iam unable to generate Pick release report, the shipping
    lines status is "ready to release" and we have a available quantity for the shipment.
    Step1 : Create a Order.
    Step2 : Save and Book the Order.
    Step3 : Pick Release the Order.
    Step4 : Go To " View My Requests".
    Step5 : Select the Request Id " Pick Slip Report "
    Step6 : Click on Output.
    Result " No Data Found.
    Thanks in Advance
    SYR

    Hi SYR,
    Pick Slip report gives you out put as NO DATA FOUND, is basically, bcos there has not been any picking of the item, reason may be,
    1. Qty avaialble wont be reservable and transactable
    Check in Inventory> On handqty > click availibility tab
    And see whether the item is available to transact & reserve.
    If you have enought qty thn you shld be able to pick release tht item.
    2. Check which sub inventory are you using while pick release, is it the same as where the item is kept.
    Try this out.
    This may help.
    Thanks
    Manoj

  • BUG:Pressing Enter in Form gives no data found

    Hello,
    The accept procedure which is the generic
    handler for the forms needs to know the form
    id, and other parameter that are set by the
    doevent javascript function, invoked when a button is clicked. Instead of clicking the button(s), if user presses enter, the accept procedure will not know which form to instantiate as a result it throws a no data found error.
    Possible solution:
    1. Adding javascript to cancel keypress by using the keypress event. Does not work.
    2. Form level javascript to detect keypresses. For this you need to allow us to access the <HEAD></HEAD> in the form. We need to add javascvript which detects the type of browser and modifies the keypress detection accordingly.
    there are a couple of more ways

    Hi SYR,
    Pick Slip report gives you out put as NO DATA FOUND, is basically, bcos there has not been any picking of the item, reason may be,
    1. Qty avaialble wont be reservable and transactable
    Check in Inventory> On handqty > click availibility tab
    And see whether the item is available to transact & reserve.
    If you have enought qty thn you shld be able to pick release tht item.
    2. Check which sub inventory are you using while pick release, is it the same as where the item is kept.
    Try this out.
    This may help.
    Thanks
    Manoj

  • Workflow portlet displays no data found

    I've managed to succesfully install the workflow portlet.
    I've added it to a portal page but when the portlet displays on the page all I get is no data found under the headings.
    When I go to the default workflow page for the same user I can see data in the worklist option. I'm using single sign on to access the default workflow page.
    Can anyone help, thanks in advance.

    I don't know what version you use but in my case, I use workflow as a component of Oracle Content Services (v 10.1.2)
    You need to configure the notification mailer, setup an email account on your mail server for inbound message, turn on imap, etc... check out the documentation I used here: http://download-west.oracle.com/docs/cd/B25553_01/content.1012/b25275/workflow.htm#i1009931
    To enable SSO for workflow:
    dads.conf looks like this:
    <Location /pls/wf>
    SetHandler pls_handler
    Order deny,allow
    Allow from all
    AllowOverride None
    PlsqlDatabaseConnectString (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=nv-oasrv5.netversant.com)(PORT=1521))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=netocs.netversant.com)))
    PlsqlNLSLanguage AMERICAN_AMERICA.AL32UTF8
    PlsqlAuthenticationMode Basic
    PlsqlDefaultPage wfa_html.home
    # Added by Nicolas
    PlsqlDatabasePassword <owf_mgr password>
    PlsqlDatabaseUsername owf_mgr
    # End of entries
    </Location>
    And mod_osso looks like this:
    <Location /pls/wf>
    require valid-user
    AuthType Basic
    </Location>

  • Load csv to Oracle gives 'No data Found ' Error

    Hi,
    i am using the steps mentioned in
    http://oraexplorer.com/2007/11/apex-to-upload-text-file-and-write-into
    to load data from CSV to apex.But it is giving me no data found at
    v_data_array := wwv_flow_utilities.string_to_table (v_line);
    Has anyone faced this issue.if so please do help me with this.
    Thanks,
    CKLP

    Hi,
    i am using the steps mentioned in
    http://oraexplorer.com/2007/11/apex-to-upload-text-file-and-write-into
    to load data from CSV to apex.But it is giving me no data found at
    v_data_array := wwv_flow_utilities.string_to_table (v_line);
    Has anyone faced this issue.if so please do help me with this.
    Thanks,
    CKLP

  • ORA-01403: no data found on LOGICAL STANDBY database

    Hi ,
    Logical Standby issue :
    Oracle 10.2.0.2 enterprise edition .
    M Working on LOGICAL Standby since 1 yrs but still i havent got this ......................................
    I m getting countinuously no data foud errror on logical standby database .
    I found the table causing the proble(db_logstdby_events) and skipped that table and instanciated table using bwlow package:
    exec dbms_logstdby.instantiate_table (.......................................
    but when i start apply process on logical standby it again give no data found for new table :
    Even i tried to instantiate the table using EXPORT/IMPORT during down time but the same facing same problem .
    As much as i known abt the error that is :
    table1
    id
    10
    20
    30
    Now if sql apply process on logical standby tries to performe the update transaction(for example) as belows
    update table1 set id=100 where id=50;
    above query will not be completed cos it will never find the values 50 which is not in table .Thts why this error comming ..
    Now my worry is ... no users dare to change/make such changes on Logical standby .So if there is no changes in tables then sqll apply should get all the values to be needded for an update ......
    watingggg guyssss/......

    Troubleshooting ORA-1403 errors with Flashback Transaction
    In the event that the SQL Apply engine errors out with an ORA-1403, it may be possible to utilize flashback transaction on the standby database to reconstruct the missing data. This is reliant upon the undo_retention parameter specified on the standby database instance.
    ORA-1403: No Data Found
    Under normal circumstances the ORA-1403 error should not be seen in a Logical Standby environment. The error occurs when data in a SQL Apply managed table is modified directly on the standby database, and then the same data is modified on the primary database.
    When the modified data is updated on the primary database and received by the SQL Apply engine, the SQL Apply engine verifies the original version of the data is present on the standby database before updating the record. When this verification fails, an ORA-1403: No Data Found error is thrown by Oracle Data Guard: SQL Apply.
    The initial error
    When the SQL Apply engine verification fails, the error thrown by the SQL Apply engine is reported in the alert log of the logical standby database as well as a record being inserted into the DBA_LOGSTDBY_EVENTS view. The information in the alert log is truncated, while the error is reported in it's entirety in the database view.
    LOGSTDBY stmt: update "SCOTT"."MASTER"
    set
    "NAME" = 'john'
    where
    "PK" = 1 and
    "NAME" = 'andrew' and
    ROWID = 'AAAAAAAAEAAAAAPAAA'
    LOGSTDBY status: ORA-01403: no data found
    LOGSTDBY PID 1006, oracle@staco03 (P004)
    LOGSTDBY XID 0x0006.00e.00000417, Thread 1, RBA 0x02dd.00002221.10
    The Investigation
    The first step is to analyze the historical data of the table that threw the error. This can be achieved using the VERSIONS clause of the SELECT statement.
    SQL> select versions_xid
    , versions_startscn
    , versions_endscn
    , versions_operation
    , pk
    , name
    from scott.master
    versions between scn minvalue and maxvalue
    where pk = 1
    order by nvl(versions_startscn,0);
    VERSIONS_XID VERSIONS_STARTSCN VERSIONS_ENDSCN V PK NAME
    03001900EE070000 3492279 3492290 I 1 andrew
    02000D00E4070000 3492290 D 1 andrew
    Depending upon the amount of undo retention that the database is configured to retain (undo_retention) and the activity on the table, the information returned might be extensive and the versions between syntax might need to be changed to restrict the amount of information returned.
    From the information returned, it can be seen that the record was first inserted at scn 3492279 and then was deleted at scn 3492290 as part of transaction ID 02000D00E4070000. Using the transaction ID, the database should be queried to find the scope of the transaction. This is achieved by querying the flashback_transaction_query view.
    SQL> select operation
    , undo_sql
    from flashback_transaction_query
    where xid = hextoraw('02000D00E4070000');
    OPERATION UNDO_SQL
    DELETE insert into "SCOTT"."MASTER"("PK","NAME") values
    ('1','andrew');
    BEGIN
    Note that there is always one row returned representing the start of the transaction. In this transaction, only one row was deleted in the master table. The undo_sql column when executed will restore the original data into the table.
    SQL> insert into "SCOTT"."MASTER"("PK","NAME") values ('1','andrew');
    SQL> commit;
    The SQL Apply engine may now be restarted and the transaction will be applied to the standby database.
    SQL> alter database start logical standby apply;

  • NO DATA FOUND IN WORKFLOW PORTLET

    Hi,
    Presently, I am working oracle portal integration project, in that , I integrate workflow portlet with portal. So, I have taken workflow portlet (version_beta_9.0.4.1) from portalstudio site, but it is giving "No Data Found" messeage. I have some doubts regarding workflow portlet.
    (i) How to add new notification?.
    (ii) Shall I configure any file?
    (iii) Where can I get meterial for workflow portlet?
    My working environment is:
    (i) oracle 10g (9.0.4) on windows 2000 professional
    Please give step by step process to integrate workflow portlet with portal.
    Thank you,
    Regards,
    Sridhar Thrasu

    hello
    your post is two years old now, so i am poping it pretty late, but did you get answers to your questions. i believe, we need to configure the oracle workflow engine itself
    regards
    ammar Sajdi
    Oracle consultant
    www.e-ammar.com
    REALSOFT - PALCO
    Amman

  • Urgent: ORA-01403: no data found Error during Order Import

    Hi Experts,
    I 'am performing order import by populating the order interface tables and then running the order import concurrent program. I 'am encountering the following error while running the order import program:
    No. of orders failed: 1
    "*ora-01403: no data found in package oe_order_pvt procedure lines*"
    Can anyone please provide some pointers on why this is occurring and how this can be overcome. Any pointers on this will be immensely helpful.
    Thanks,
    Ganapathi

    Hi Nagamohan,
    Thanks for your response. I tried calling mo_global.set_policy_context('S', <org_id>) before invoking the concurrent program using fnd_request.submit_request(...); But, this still does n't seem to prevent the No data found issue.
    One more thing that I noticed is, this is happening while importing the customer along with the order. I 've ensured that I use the same org_id for the customer data as well. Can you please let me know whether there is anything else that I should check for.
    Thanks,
    Ganapathi

  • Import job failes with ORA-01403: no data found ORA-06512: at "SYSMAN.MGMT

    Hello everyone,
    I need a help on importing data from a schema in server 1 to the same schema in server 2 via network link. I receive following error when I try to submit a job on Enterprise Manager:
    Import Submit Failed
    ORA-01403: no data found ORA-06512: at "SYSMAN.MGMT_JOB_ENGINE", line 5806 ORA-06512: at "SYSMAN.MGMT_JOB_ENGINE", line 7812 ORA-06512: at "SYSMAN.MGMT_JOB_ENGINE", line 8608 ORA-01403: no data found ORA-06512: at "SYSMAN.MGMT_JOBS", line 273 ORA-06512: at "SYSMAN.MGMT_JOBS", line 86 ORA-06512: at line 1
    Sql of the job:
    declare
    h1 NUMBER;
    begin
    h1 := dbms_datapump.open (operation => 'IMPORT', job_mode => 'FULL', remote_link => 'B_PROD_LINK', job_name => 'BIMPORTFRMPRDTORPT4', version => 'COMPATIBLE');
    dbms_datapump.set_parallel(handle => h1, degree => 1);
    dbms_datapump.add_file(handle => h1, filename => 'IMPORT.LOG', directory => 'DATA_PUMP_DIR', filetype => 3);
    dbms_datapump.set_parameter(handle => h1, name => 'KEEP_MASTER', value => 0);
    dbms_datapump.set_parameter(handle => h1, name => 'INCLUDE_METADATA', value => 1);
    dbms_datapump.set_parameter(handle => h1, name => 'ESTIMATE', value => 'BLOCKS');
    dbms_datapump.set_parameter(handle => h1, name => 'REUSE_DATAFILES', value => 0);
    dbms_datapump.set_parameter(handle => h1, name => 'TABLE_EXISTS_ACTION', value => 'TRUNCATE');
    dbms_datapump.set_parameter(handle => h1, name => 'SKIP_UNUSABLE_INDEXES', value => 0);
    dbms_datapump.start_job(handle => h1, skip_current => 0, abort_step => 0);
    dbms_datapump.detach(handle => h1);
    end;
    It says network link is active when I test the network link to make sure its connectivity. I create the network link as a system account. I'm trying to do an import from an Oracle database 10.2.0.2 to 11.2.0.1. My 10g database is on ms windows 2003x64 while my 11g database is on OEL 5.4x64.
    What should I do for now?
    Thank you.
    Edited by: user12144220 on Nov 4, 2012 5:02 AM

    It will be wise to run the Oracle supply streams health check script to check your existing streams environment.
    From the result, you can also open a tar with Oracle to see if they can help you with the setup.
    In addition to the ORA-01403 error, you can also run some of the Oracle Streams packages (Managing Apply Errors) to see the full detail of what is missing that caused the Ora-01403 error.
    I will also try to implement a smoke test using the simple heartbeat table suggested by Oracle Streams, if that is working, then you can begin your full scale setup in your environment knowing that the base Streams Structure is setup correctly.
    HTH

  • Pb importing already-existing pages - ORA-01403: no data found

    Hi,
    I get an issue when trying to import a page already existing on my target environment.
    The problem does not occur during the import, but when trying to edit the page, once imported.
    I get the following error message:
    Error: ORA-01403: no data found
    Note that this problem does not appear if I export/import the entire pagegroup, but only when exporting/importing
    one or several pages independently.
    Thanks for your help,
    Best Regards,
    Jean-Christophe

    WWV_FLOW_FILES is a view that will show different data based on which schema you are working in. If you do a:
    select * from wwv_flow_files
    from within the schema you are developing in are you seeing any data?

  • Importing txt file to create table - no data found message

    I'm trying to import a 242kb comma delimited text file to create a table in 2.2.
    I get the message - ORA-20001: Unable to create collection: ORA-20001: Get data type error: ORA-01403: no data found
    Error creating collection using loaded data.
    If I use a text file with only one row of data, Apex proceeds to start creating columns based on the content. Is my file simply too big? Is there some bogus data buried within my file that I need to seek out? It is basically the result of a query (Access) that is saved as a comma delimited text file. No text qualifier, btw.
    Clayton

    Hi, Andy.
    Yeah, I'm sure there are some. I've always questioned using commas. Think that's it? I guess I could throw in a tilda or something equally obscure. I must admit, the folks that parse out commas and the like do a decent job. Not always, perhaps.
    I'll look into it.
    Tomorrow. It's 2:30 here, and we eat Turkey tomorrow. At the in-laws. With folks we don't always care so much for. Discusssing things we don't care to discuss. And they wonder why we take separate cars.
    Thanks again - I'll look into it.
    Clayton

  • Error processing request  ORACLE-01403:no data found

    We surmounted the blank page issue by applying the patch to APEX 4.2.2.
    Now we patched/upgraded to APEX 4.2.3, and no longer have the blank page issue, but have this one that seems similar:
    I am trying here, since I am not getting any debug messages - the POST goes in and immediately comes back with the no data found error.
    APEX 4.2.3
    APEX Listener 2.0.2
    Glassfish 4.0
    Apps install OK, and can display the Login page (Show), but when trying to Login (Accept),
    immediately get this error:
    Error Error processing request
              ORA-010403: no data found
    Debug messages only shows Show entries - nothing , not even the Accept first line.
    Firebug shows similar - upon Post (which looks OK) the immediate response is the error page and message.
    I do not have access to the APEX Listener logs tonight,  but expect to get to them, or have someone check them
    out, tomorrow AM.
    Any thoughts or suggestions?
    This happens across all apps (15) except for one.  Am still trying to discern the different in that app vs the others.
    Thank you -

    An update:
    I have verified that some apps work, and some apps show the
    Error Error processing request
            ORA-01403: no data found
    error.
    Happens across different workspaces.
    Have confirmed that for an app that has the error,
       I get the error using the APEX Listener deployment. 
       I do NOT get the error using the HTTP server deployment.
    This is the same in a Linux environment and in a Windows environment.
    For one app, I have an earlier version that gives the error, a later version (new app #) that does not give the error.
    APEX 4.2.3
    APEX Listener 2.0.3.221.10/3
    Glassfish 4.0
    Again even at  Debug Level 9, I get no debug entries for the POST
    For an app that gives the error, the APEX Listener log entries are (from the POST):
    ==== Processing Request: ====
    Attempting to process with PL/SQL Gateway
    user-agent: Mozilla/5.0 (Windows NT 5.1; rv:23.0) Gecko/20100101 Firefox/23.0
    host: qdcls1534:8082
    Applied database connection info
    POST /apex/apexd2/wwv_flow.accept
    ==== Headers in Request ====
    ==== Cookies in Request ====
    content-length: 412
    content-type: application/x-www-form-urlencoded;charset=UTF-8
    request parameter: p_flow_id=440
    request parameter: p_flow_id=440
    request parameter: p_flow_step_id=101
    request parameter: p_instance=1712832201985
    request parameter: p_instance=1712832201985
    request parameter: p_page_submission_id=8493461183923
    request parameter: p_page_submission_id=35145982114211
    request parameter: p_request=LOGIN
    request parameter: p_request=
    request parameter: p_debug=LEVEL9
    request parameter: p_debug=LEVEL9
    request parameter: p_arg_names=13616030313099104709
    request parameter: p_arg_names=13616030522289104711
    request parameter: p_t01=karen.x.cannell
    request parameter: p_t02=sssssssss
    request parameter: p_md5_checksum=
    request parameter: p_page_checksum=C2302553B43577579FF77585749CA016
    Using Procedure:wwv_flow.accept
    request parameter: p_flow_step_id=101
    Requesting Pool:apexd2
    pool exists: apexd2
    isValidRequest(), procedure name: <wwv_flow.accept>
    Validating: wwv_flow.accept
    *** Total number of arguments: 510
    SID: 214
    *** Total number of arguments: 510
    begin
    wwv_flow.accept(p_flow_step_id=>?,
    p_md5_checksum=>?,
    p_arg_names=>?,
    p_page_checksum=>?,
    p_t02=>?,
    p_t01=>?,
    p_debug=>?,
    p_request=>?,
    p_page_submission_id=>?,
    p_flow_id=>?,
    p_instance=>?);
    commit;
      end;"
    Parse: 0 ms
    p_flow_step_id= null
    p_flow_step_id=[101, 101]
    {p_md5_checksum=, p_page_submission_id=[8493461183923, 35145982114211], p_debug=[LEVEL9, LEVEL9], p_page_checksum=C2302553B43577579FF77585749CA016, p_request=[LOGIN, ], p_t02=sssssssss, p_t01=karen.x.cannell, p_flow_id=[440, 440], p_instance=[1712832201985, 1712832201985], p_flow_step_id=[101, 101], p_arg_names=[13616030313099104709, 13616030522289104711]}
    p_request=[LOGIN, ]
    p_md5_checksum=
    {p_md5_checksum=, p_page_submission_id=[8493461183923, 35145982114211], p_debug=[LEVEL9, LEVEL9], p_page_checksum=C2302553B43577579FF77585749CA016, p_request=[LOGIN, ], p_t02=sssssssss, p_t01=karen.x.cannell, p_flow_id=[440, 440], p_instance=[1712832201985, 1712832201985], p_flow_step_id=[101, 101], p_arg_names=[13616030313099104709, 13616030522289104711]}
    p_arg_names=[13616030313099104709, 13616030522289104711]
    p_arg_names: {13616030313099104709, 13616030522289104711}
    {p_md5_checksum=, p_page_submission_id=[8493461183923, 35145982114211], p_debug=[LEVEL9, LEVEL9], p_page_checksum=C2302553B43577579FF77585749CA016, p_request=[LOGIN, ], p_t02=sssssssss, p_t01=karen.x.cannell, p_flow_id=[440, 440], p_instance=[1712832201985, 1712832201985], p_flow_step_id=[101, 101], p_arg_names=[13616030313099104709, 13616030522289104711]}
    {p_md5_checksum=, p_page_submission_id=[8493461183923, 35145982114211], p_debug=[LEVEL9, LEVEL9], p_page_checksum=C2302553B43577579FF77585749CA016, p_request=[LOGIN, ], p_t02=sssssssss, p_t01=karen.x.cannell, p_flow_id=[440, 440], p_instance=[1712832201985, 1712832201985], p_flow_step_id=[101, 101], p_arg_names=[13616030313099104709, 13616030522289104711]}
    p_instance= null
    p_instance=[1712832201985, 1712832201985]
    {p_md5_checksum=, p_page_submission_id=[8493461183923, 35145982114211], p_debug=[LEVEL9, LEVEL9], p_page_checksum=C2302553B43577579FF77585749CA016, p_request=[LOGIN, ], p_t02=sssssssss, p_t01=karen.x.cannell, p_flow_id=[440, 440], p_instance=[1712832201985, 1712832201985], p_flow_step_id=[101, 101], p_arg_names=[13616030313099104709, 13616030522289104711]}
    p_flow_id= null
    p_flow_id=[440, 440]
    {p_md5_checksum=, p_page_submission_id=[8493461183923, 35145982114211], p_debug=[LEVEL9, LEVEL9], p_page_checksum=C2302553B43577579FF77585749CA016, p_request=[LOGIN, ], p_t02=sssssssss, p_t01=karen.x.cannell, p_flow_id=[440, 440], p_instance=[1712832201985, 1712832201985], p_flow_step_id=[101, 101], p_arg_names=[13616030313099104709, 13616030522289104711]}
    p_page_submission_id= null
    p_page_submission_id=[8493461183923, 35145982114211]
    {p_md5_checksum=, p_page_submission_id=[8493461183923, 35145982114211], p_debug=[LEVEL9, LEVEL9], p_page_checksum=C2302553B43577579FF77585749CA016, p_request=[LOGIN, ], p_t02=sssssssss, p_t01=karen.x.cannell, p_flow_id=[440, 440], p_instance=[1712832201985, 1712832201985], p_flow_step_id=[101, 101], p_arg_names=[13616030313099104709, 13616030522289104711]}
    p_request= null
    p_md5_checksum=
    {p_md5_checksum=, p_page_submission_id=[8493461183923, 35145982114211], p_debug=[LEVEL9, LEVEL9], p_page_checksum=C2302553B43577579FF77585749CA016, p_request=[LOGIN, ], p_t02=sssssssss, p_t01=karen.x.cannell, p_flow_id=[440, 440], p_instance=[1712832201985, 1712832201985], p_flow_step_id=[101, 101], p_arg_names=[13616030313099104709, 13616030522289104711]}
    p_debug= null
    p_debug=[LEVEL9, LEVEL9]
    {p_md5_checksum=, p_page_submission_id=[8493461183923, 35145982114211], p_debug=[LEVEL9, LEVEL9], p_page_checksum=C2302553B43577579FF77585749CA016, p_request=[LOGIN, ], p_t02=sssssssss, p_t01=karen.x.cannell, p_flow_id=[440, 440], p_instance=[1712832201985, 1712832201985], p_flow_step_id=[101, 101], p_arg_names=[13616030313099104709, 13616030522289104711]}
    p_t01= karen.x.cannell
    p_t01=karen.x.cannell
    {p_md5_checksum=, p_page_submission_id=[8493461183923, 35145982114211], p_debug=[LEVEL9, LEVEL9], p_page_checksum=C2302553B43577579FF77585749CA016, p_request=[LOGIN, ], p_t02=sssssssss, p_t01=karen.x.cannell, p_flow_id=[440, 440], p_instance=[1712832201985, 1712832201985], p_flow_step_id=[101, 101], p_arg_names=[13616030313099104709, 13616030522289104711]}
    p_t02= sssssssss
    p_t02=sssssssss
    {p_md5_checksum=, p_page_submission_id=[8493461183923, 35145982114211], p_debug=[LEVEL9, LEVEL9], p_page_checksum=C2302553B43577579FF77585749CA016, p_request=[LOGIN, ], p_t02=sssssssss, p_t01=karen.x.cannell, p_flow_id=[440, 440], p_instance=[1712832201985, 1712832201985], p_flow_step_id=[101, 101], p_arg_names=[13616030313099104709, 13616030522289104711]}
    p_page_checksum= C2302553B43577579FF77585749CA016
    p_page_checksum=C2302553B43577579FF77585749CA016
    Exec: 37 ms
    ==== Headers from Results ====
    Setting Content-Type (Content-type): text/html; charset=UTF-8
    Got results length: 307
    Processed PL/SQL Gateway request
    ==== Request Processed ====
    It just stops ...
    Any ideas?
    I have tried all of the Compatibility settings, no difference.
    If it is something I can change in the app, that would be great.
    The app that does not work was imported from an APEX 4.1 instance.
    The app that does work was imported from an APEX 4..3 instance (Windows, APEX 4.2.3, APEX Listener 2.0.3, recently upgraded from APEX 4.2.2 and APEX Listener 2.0.2).
    Any help or suggestions will be greatly appreciated,
    Karen

  • I am getting ORA-01403: no data found error while calling a stored procedur

    Hi, I have a stored procedure. When I execute it from Toad it is successfull.
    But when I call that from my java function it gives me ORA-01403: no data found error -
    My code is like this -
    SELECT COUNT(*) INTO L_N_CNT FROM TLSI_SI_MAST WHERE UPPER(CUST_CD) =UPPER(R_V_CUST_CD) AND
    UPPER(ACCT_CD)=UPPER(R_V_ACCT_CD) AND UPPER(CNSGE_CD)=UPPER(R_V_CNSGE_CD) AND
    UPPER(FINALDEST_CD)=UPPER(R_V_FINALDEST_CD) AND     UPPER(TPT_TYPE)=UPPER(R_V_TPT_TYPE);
         IF L_N_CNT >0 THEN
              DBMS_OUTPUT.PUT_LINE('ERROR -DUPlicate SI-1');
              SP_SEL_ERR_MSG(5,R_V_ERROR_MSG);
              RETURN;
         ELSE
              DBMS_OUTPUT.PUT_LINE('BEFORE-INSERT');
              INSERT INTO TLSI_SI_MAST
                   (     CUST_CD, ACCT_CD, CNSGE_CD, FINALDEST_CD, TPT_TYPE,
                        ACCT_NM, CUST_NM,CNSGE_NM, CNSGE_ADDR1, CNSGE_ADDR2,CNSGE_ADDR3,
                        CNSGE_ADDR4, CNSGE_ATTN, EFFECTIVE_DT, MAINT_DT,
                        POD_CD, DELVY_PL_CD, TRANSSHIP,PARTSHIPMT, FREIGHT,
                        PREPAID_BY, COLLECT_BY, BL_REMARK1, BL_REMARK2,
                        MCC_IND, NOMINATION, NOTIFY_P1_NM,NOTIFY_P1_ATTN , NOTIFY_P1_ADDR1,
                        NOTIFY_P1_ADDR2, NOTIFY_P1_ADDR3, NOTIFY_P1_ADDR4,NOTIFY_P2_NM,NOTIFY_P2_ATTN ,
                        NOTIFY_P2_ADDR1,NOTIFY_P2_ADDR2, NOTIFY_P2_ADDR3, NOTIFY_P2_ADDR4,
                        NOTIFY_P3_NM,NOTIFY_P3_ATTN , NOTIFY_P3_ADDR1,NOTIFY_P3_ADDR2, NOTIFY_P3_ADDR3,
                        NOTIFY_P3_ADDR4,CREATION_DT, ACCT_ATTN, SCC_IND, CREAT_BY, MAINT_BY
                        VALUES(     R_V_CUST_CD,R_V_ACCT_CD,R_V_CNSGE_CD,R_V_FINALDEST_CD,R_V_TPT_TYPE,
                        R_V_ACCT_NM,R_V_CUST_NM ,R_V_CNSGE_NM, R_V_CNSGE_ADDR1,R_V_CNSGE_ADDR2, R_V_CNSGE_ADDR3,
                        R_V_CNSGE_ADDR4,R_V_CNSGE_ATTN,     R_V_EFFECTIVE_DT ,SYSDATE, R_V_POD_CD,R_V_DELVY_PL_CD,R_V_TRANSSHIP ,R_V_PARTSHIPMT , R_V_FREIGHT,
                        R_V_PREPAID_BY ,R_V_COLLECT_BY ,R_V_BL_REMARK1 ,R_V_BL_REMARK2,R_V_MCC_IND,
                        R_V_NOMINATION,R_V_NOTIFY_P1_NM, R_V_NOTIFY_P1_ATTN, R_V_NOTIFY_P1_ADD1, R_V_NOTIFY_P1_ADD2,
                        R_V_NOTIFY_P1_ADD3, R_V_NOTIFY_P1_ADD4, R_V_NOTIFY_P2_NM, R_V_NOTIFY_P2_ATTN, R_V_NOTIFY_P2_ADD1,
                        R_V_NOTIFY_P2_ADD2, R_V_NOTIFY_P2_ADD3, R_V_NOTIFY_P2_ADD4, R_V_NOTIFY_P3_NM, R_V_NOTIFY_P3_ATTN,
                        R_V_NOTIFY_P3_ADD1, R_V_NOTIFY_P3_ADD2, R_V_NOTIFY_P3_ADD3, R_V_NOTIFY_P3_ADD4,
                        SYSDATE,R_V_ACCT_ATTN,R_V_SCC_IND,R_V_USER_ID,R_V_USER_ID
                        DBMS_OUTPUT.PUT_LINE(' SI - REC -INSERTED');
         END IF;

    Hi,
    I think there is a part of the stored procedure you did not displayed in your post. I think your issue is probably due to a parsed value from java. For example when calling a procedure from java and the data type from java is different than expected by the procedure the ORA-01403 could be encountered. Can you please show the exact construction of the call of the procedure from within java and also how the procedure possible is provided with an input parameter.
    Regards, Gerwin

  • How can we give the Data Format (File Type ) in Runtime

    Hi all,
    How can we give the Data Format (File Type ) in Runtime for the following method,
    cl_gui_frontend_services=>gui_download.
    Thanks in advance
    Sri

    There is a filetype parameter which you can set
    CALL METHOD cl_gui_frontend_services=>gui_download
      EXPORTING
    *    BIN_FILESIZE              =
        filename                  =
    *    FILETYPE                  = 'ASC'
    *    APPEND                    = SPACE
    *    WRITE_FIELD_SEPARATOR     = SPACE
    *    HEADER                    = '00'
    *    TRUNC_TRAILING_BLANKS     = SPACE
    *    WRITE_LF                  = 'X'
    *    COL_SELECT                = SPACE
    *    COL_SELECT_MASK           = SPACE
    *    DAT_MODE                  = SPACE
    *    CONFIRM_OVERWRITE         = SPACE
    *    NO_AUTH_CHECK             = SPACE
    *    CODEPAGE                  = SPACE
    *    IGNORE_CERR               = ABAP_TRUE
    *    REPLACEMENT               = '#'
    *    WRITE_BOM                 = SPACE
    *    TRUNC_TRAILING_BLANKS_EOL = 'X'
    *  IMPORTING
    *    FILELENGTH                =
      changing
        data_tab                  =
    *  EXCEPTIONS
    *    FILE_WRITE_ERROR          = 1
    *    NO_BATCH                  = 2
    *    GUI_REFUSE_FILETRANSFER   = 3
    *    INVALID_TYPE              = 4
    *    NO_AUTHORITY              = 5
    *    UNKNOWN_ERROR             = 6
    *    HEADER_NOT_ALLOWED        = 7
    *    SEPARATOR_NOT_ALLOWED     = 8
    *    FILESIZE_NOT_ALLOWED      = 9
    *    HEADER_TOO_LONG           = 10
    *    DP_ERROR_CREATE           = 11
    *    DP_ERROR_SEND             = 12
    *    DP_ERROR_WRITE            = 13
    *    UNKNOWN_DP_ERROR          = 14
    *    ACCESS_DENIED             = 15
    *    DP_OUT_OF_MEMORY          = 16
    *    DISK_FULL                 = 17
    *    DP_TIMEOUT                = 18
    *    FILE_NOT_FOUND            = 19
    *    DATAPROVIDER_EXCEPTION    = 20
    *    CONTROL_FLUSH_ERROR       = 21
    *    NOT_SUPPORTED_BY_GUI      = 22
    *    ERROR_NO_GUI              = 23
    *    others                    = 24

  • No Data Found: Exception in SQL inside PL/SQL block

    Hi Friends
    I am trying to execute an SQL SELECT stmt inside a PL/SQL block. But when i execute the procedure, it gives me No Data Found Exception.
    I know it is because no row is fetched in the query, but the condition of the SELECT query i have specified is being satisfied, i have checked it by running it on the SQL prompt.
    But somehow, it is not running from inside the PL/SQL procedure.Can anybody help me out on this as to why is this happening?? I am giving my code for reference and have Highlighted the Query inside it:
    CREATE OR REPLACE procedure insert_sfdc_account
    as
    --DECLARE
    CURSOR C1 IS
    SELECT customer_code, name1, name2, name3, name4, phone_number, fax, web_address, industry_sector, customer_profile, customer_type,
    address, city, postal_code, country_key, zzcust_type, vat_code
    FROM load_cust_general
    WHERE account_group = 'ZSIT';
    v_cust_cur c1%ROWTYPE;
    -- type sales_tab is table of load_cust_sales_area%rowtype;
    v_sales_area load_cust_sales_area%ROWTYPE;
    -- v_sales_area sales_tab;
         v_salesorg varchar2(10);
         v_sales_district varchar2(10);
         v_salesoff varchar2(10);
         v_custgrp varchar2(10);
         v_salesgrp varchar2(10);
    v_type varchar2(20);
    v_nature varchar2(10);
    v_partner_code varchar2(10);
    v_parent_cust varchar2(20);
    v_credit_blk varchar2(20);
    BEGIN
    open c1;
    loop
    fetch c1 into v_cust_cur;
    exit when c1%NOTFOUND;
    for i in (SELECT customer_code, salesorg from load_cust_partner
    where customer_code = v_cust_cur.customer_code ) LOOP
    dbms_output.put_line(v_cust_cur.customer_code );
                        SELECT partner_code into v_partner_code from load_cust_partner
    where customer_code = i.customer_code and salesorg = i.salesorg and partner_function = 'Z1';
    dbms_output.put_line(v_partner_code||i.customer_code);
    SELECT salesorg, sales_district, salesoff, salesgrp, custgrp INTO v_salesorg, v_sales_district, v_salesoff, v_salesgrp, v_custgrp FROM load_cust_sales_area
              WHERE customer_code = i.customer_code and salesorg = i.salesorg;
                   dbms_output.put_line(v_salesorg||i.salesorg);
                        SELECT parent_customer INTO v_parent_cust from load_cust_hierarchy
    WHERE customer_code = i.customer_code and salesorg = i.salesorg and hierarchy_type = 'G'; dbms_output.put_line(v_parent_cust);
                        SELECT credit_block INTO v_credit_blk from load_cust_company_cod
              WHERE customer_code = i.customer_code;
    dbms_output.put_line(v_credit_blk);
    for j in (SELECT account_group, customer_type from load_cust_general
    where customer_code IN (select customer_code from load_cust_partner
                                  where partner_code = i.customer_code and salesorg = i.salesorg and partner_function = 'ZS'))
                                                      LOOP
    -- exit when j%NOTFOUND;
         dbms_output.put_line(j.account_group);
    if (j.account_group = 'ZDIS') THEN
    v_type := 'DISAC';
              v_nature := '06';
         --     EXIT ;
    else
    v_type := 'SPACC';
    v_nature := '01';
    END IF;
    dbms_output.put_line(v_type||' '||v_nature);
    END LOOP;
    INSERT INTO sfdc_account
              (SAP_ACCOUNT_ID__C, NAME, TYPE, RECORDTYPEID, PARENTID, PHONE, FAX, WEBSITE, OWNERID, MARKETING_DOMAIN__C,
    INDUSTRIAL_SECTOR__C, ABC_CLASSIFICATION__C, NAME_1__C, NAME_2__C, NAME_3__C, NAME_4__C, PAYMENT_STATUS__C,
    CUSTOMER_GROUP__C, ADDRESS_STREET__C, CITY__C, POSTAL_CODE__C, COUNTRY__C, SALES_OFFICE__C, SALESORG__C,
    SALESDISTRICT__C, SALESGROUP__C, NATURE__C, VATCODE__C)
    VALUES((i.customer_code||i.salesorg), (v_cust_cur.Name1||' '||v_cust_cur.name2), ' ', v_type, v_parent_cust,
    v_cust_cur.phone_number, v_cust_cur.fax, v_cust_cur.web_address, v_partner_code, SUBSTR(v_cust_cur.industry_sector,1,2),
    v_cust_cur.industry_sector, v_cust_cur.customer_profile, v_cust_cur.name1, v_cust_cur.name2, v_cust_cur.name3,
    v_cust_cur.name4, v_credit_blk, v_custgrp, v_cust_cur.address, v_cust_cur.city, v_cust_cur.postal_code,
    v_cust_cur.country_key, v_salesoff, v_salesorg, v_sales_district,
    v_salesgrp, v_nature, v_cust_cur.vat_code);
    end loop;
    end loop;
    CLOSE c1;
    -- Delete data from Load Table
    -- EXECUTE IMMEDIATE 'TRUNCATE TABLE load_cust_general';
    /* truncate table load_cust_partner;
    truncate table load_cust_hierarhy;
    truncate table load_cust_sales_area;
    truncate table load_cust_company_cod;
    commit;
    exception
    when others then
    raise_application_error( -20001, substr( sqlerrm, 1, 150 ) );
    END;
    Kindly Help.....
    Thanks and Regards

    Create the procedure again and execute it in SQL*Plus environment and paste the output:
    CREATE OR REPLACE procedure insert_sfdc_account
    as
    --DECLARE
    CURSOR C1 IS
    SELECT customer_code, name1, name2, name3, name4, phone_number, fax, web_address, industry_sector, customer_profile, customer_type,
    address, city, postal_code, country_key, zzcust_type, vat_code
    FROM load_cust_general
    WHERE account_group = 'ZSIT';
    v_cust_cur c1%ROWTYPE;
    -- type sales_tab is table of load_cust_sales_area%rowtype;
    v_sales_area load_cust_sales_area%ROWTYPE;
    -- v_sales_area sales_tab;
    v_salesorg varchar2(10);
    v_sales_district varchar2(10);
    v_salesoff varchar2(10);
    v_custgrp varchar2(10);
    v_salesgrp varchar2(10);
    v_type varchar2(20);
    v_nature varchar2(10);
    v_partner_code varchar2(10);
    v_parent_cust varchar2(20);
    v_credit_blk varchar2(20);
    BEGIN
    open c1;
    loop
    fetch c1 into v_cust_cur;
    exit when c1%NOTFOUND;
    for i in (SELECT customer_code, salesorg from load_cust_partner
    where customer_code = v_cust_cur.customer_code ) LOOP
    SELECT partner_code into v_partner_code from load_cust_partner
    where customer_code = i.customer_code and salesorg = i.salesorg and partner_function = 'Z1';
    SELECT salesorg, sales_district, salesoff, salesgrp, custgrp INTO v_salesorg, v_sales_district, v_salesoff, v_salesgrp, v_custgrp FROM load_cust_sales_area
    WHERE customer_code = i.customer_code and salesorg = i.salesorg;
    dbms_output.put_line('Customer_Code : '|| i.customer_code);
    dbms_output.put_line('SalesOrg : '|| i.salesorg);
    SELECT parent_customer INTO v_parent_cust from load_cust_hierarchy
    WHERE customer_code = i.customer_code and salesorg = i.salesorg and hierarchy_type = 'G';
    dbms_output.put_line('Successfully Executed SQL st. Error is somewhere else');
    SELECT credit_block INTO v_credit_blk from load_cust_company_cod
    WHERE customer_code = i.customer_code;
    for j in (SELECT account_group, customer_type from load_cust_general
    where customer_code IN (select customer_code from load_cust_partner
    where partner_code = i.customer_code and salesorg = i.salesorg and partner_function = 'ZS'))
    LOOP
    -- exit when j%NOTFOUND;
    if (j.account_group = 'ZDIS') THEN
    v_type := 'DISAC';
    v_nature := '06';
    -- EXIT ;
    else
    v_type := 'SPACC';
    v_nature := '01';
    END IF;
    END LOOP;
    INSERT INTO sfdc_account
    (SAP_ACCOUNT_ID__C, NAME, TYPE, RECORDTYPEID, PARENTID, PHONE, FAX, WEBSITE, OWNERID, MARKETING_DOMAIN__C,
    INDUSTRIAL_SECTOR__C, ABC_CLASSIFICATION__C, NAME_1__C, NAME_2__C, NAME_3__C, NAME_4__C, PAYMENT_STATUS__C,
    CUSTOMER_GROUP__C, ADDRESS_STREET__C, CITY__C, POSTAL_CODE__C, COUNTRY__C, SALES_OFFICE__C, SALESORG__C,
    SALESDISTRICT__C, SALESGROUP__C, NATURE__C, VATCODE__C)
    VALUES((i.customer_code||i.salesorg), (v_cust_cur.Name1||' '||v_cust_cur.name2), ' ', v_type, v_parent_cust,
    v_cust_cur.phone_number, v_cust_cur.fax, v_cust_cur.web_address, v_partner_code, SUBSTR(v_cust_cur.industry_sector,1,2),
    v_cust_cur.industry_sector, v_cust_cur.customer_profile, v_cust_cur.name1, v_cust_cur.name2, v_cust_cur.name3,
    v_cust_cur.name4, v_credit_blk, v_custgrp, v_cust_cur.address, v_cust_cur.city, v_cust_cur.postal_code,
    v_cust_cur.country_key, v_salesoff, v_salesorg, v_sales_district,
    v_salesgrp, v_nature, v_cust_cur.vat_code);
    end loop;
    end loop;
    CLOSE c1;
    -- Delete data from Load Table
    -- EXECUTE IMMEDIATE 'TRUNCATE TABLE load_cust_general';
    /* truncate table load_cust_partner;
    truncate table load_cust_hierarhy;
    truncate table load_cust_sales_area;
    truncate table load_cust_company_cod;
    commit;
    exception
    when others then
    raise_application_error( -20001, substr( sqlerrm, 1, 150 ) );
    END;
    SQL> set serveroutput on
    SQL> exec insert_sfdc_account;

Maybe you are looking for

  • Getting bookmarks and address book to put into preference files in OS10 Jag

    hello I just loaded up OSX Jaguar on my computer I have a powermac G3 and originally have OS 9.2 classic also. I am trying to put my bookmarks and adbrees book in my browsers on OSX but cant find a place to put them both internet Explorer and Netscap

  • Apple TV does not work with 877W

    Hi all, I am using an 877W as my DSL router and trying to use Apple TV or other Apple Bonjour services over Wireless. It is simply not working although I tried several IGMP configurations. I've seen some references to 877W issues but they were all ab

  • Oracle 10g with JRUN 4.0

    Hi, I am new to this side... & Secondly i am not a Java expert .... I am a Oracle DBA.... We are using Oracle 10g with JRUN 4.0 ...... In Oracle i define all the paramters properly... I thing some how we are unable to configure our JRUN 4.0 successfu

  • Background color gets offset in Configurator and Photoshop (Mac OS)

    I have a panel with a HTML widget. I set the background color with CSS to #d6d6d6 to match Photoshop. However, my panel does not get the color I picked for it, instead it gets the color #cdcdcd (a slightly darker gray). As a workaround I set the colo

  • Connect monitor to imac

    are you able to connect different monitor to imac