Wpdomain.db disappears after first run of MTA on Linux

SLES10SP2
GW7.03 No HP
I'm trying to move from Netware 6.0sp8 to a SLES10SP2 VM on ESX4.
I've used Reload to migrate my PO data but using dbcopy (per Danita's guide) to migrate the domain (with gateways).
When I first fire up the MTA (gui) to test it loads up just fine. Exiting the MTA cleanly results in an error: "DIS: Internal Error (8209)". After this the MTA can not be restarted, I receive "Can't find domain database", which makes sense since all of the files in my domain directory have disappeared! The subdirectories are still there but there aren't any files in the root of the domain directory (hence why it can't find wpdomain.db).
I've attempted this move 3 times now with zero success.
Any thoughts or advice?

dqualls,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Similar Messages

SSRS 2012 Reports freeze after first run in IE 11

Hello,
We have just recently upgraded/migrated from SSRS 2008R2 to SSRS 2012 sp2 (Windows 2012 R1).
We have found one report so far when using IE 11 that after the first run from the client side Internet Explorer freezes. The report normally takes 4-5 seconds to run. I have waited an hour and the report has not resolved.
The same report runs fine in Firefox or Chrome, even after multiple runs. It also continues to run fine from our SSRS 2008R2 server from IE 11.
I have tried private browsing and it still only runs once and will not run again. I have tried compatability mode and it will not run either. I have also noted that it will crash our ERP system (java based) when it is running at the same time
in IE as when I run this report. Other reports seem to work fine.
The report is simple, it is just a report of subscriptions from ReportServer. There is some XML parsing in there though. It is the only difference that I can see in all the other reports on the system. Oh, the report runs fine from
Visual Studio 2012. I have redeployed, and no luck yet.
Here is my query
WITH [EMAIL]([SubscriptionID], [EmailLine]) AS
SELECT I.[SubscriptionID],
         I1.rows.value('Value [1]', 'VARCHAR(MAX)') AS [EmailLine]
FROM    (
          --if the Subscription is an e-mail, get the XML fragment which contains the Email line
          SELECT S.[SubscriptionID],
                  --add a "root" element to create well-formed XML to the "ExtensionSettings"
                  --(in case it's NULL)
                  CONVERT(XML, N'<Root>' + CONVERT(NVARCHAR(MAX), S.[ExtensionSettings]) + N'</Root>') AS [ExtensionSettings]
          FROM    ReportServer.dbo.[Subscriptions] S WITH (NOLOCK)
          WHERE   --only get e-mail subscriptions
                  S.[DeliveryExtension] = 'Report Server Email'
         ) I CROSS APPLY
             --pull out elements in the "ParameterValues/ParameterValue" hierarchy
             I.ExtensionSettings.nodes('/Root/ParameterValues/ParameterValue') AS I1(rows)
WHERE   --only get the Subject field
         --I1.rows.value('Name [1]', 'VARCHAR(100)') = 'Subject'
         I1.rows.value('Name [1]', 'VARCHAR(100)') IN ('TO', 'BCC','CC')
--get subscription data for all users
SELECT   replace([EMAIL].[EmailLine], '@plu.edu','') email_line,
        --internally put-together description of subscription
--        S.[Description],
        --user-friendly message for what happened the last time the subscription ran
        --which may be "New Subscription"
        --report path and name
        C.[Path], C.[Name],
        --start date and end date for schedule
        SC.[StartDate], SC.[EndDate],
        --when the subscription was modified
        S.[ModifiedDate]
FROM    --actual subscriptions
        ReportServer.dbo.[Subscriptions] S WITH (NOLOCK) LEFT OUTER JOIN
            --report details from Catalog
            ReportServer.dbo.[Catalog] C WITH (NOLOCK) ON
                S.[Report_OID] = C.[ItemID] LEFT OUTER JOIN
            --Users (owner)
            ReportServer.dbo.[Users] [U1] WITH (NOLOCK) ON
                S.[OwnerID] = [U1].[UserID] LEFT OUTER JOIN
            --Users (modified by)
            ReportServer.dbo.[Users] [U2] WITH (NOLOCK) ON
                S.[ModifiedByID] = [U2].[UserID] LEFT OUTER JOIN
            --Subscription Schedules
            ReportServer.dbo.[ReportSchedule] RS WITH (NOLOCK) ON
                S.[SubscriptionID] = RS.[SubscriptionID] LEFT OUTER JOIN
            --Schedules
            ReportServer.dbo.[Schedule] SC WITH (NOLOCK) ON
                RS.[ScheduleID] = SC.[ScheduleID] LEFT OUTER JOIN
            --Subjects CTE from e-mail subscriptions
            [EMAIL] ON
                S.[SubscriptionID] = [EMAIL].[SubscriptionID]
WHERE EmailLine is not null
and EmailLine like '%' + @Email + '%'
and C.[Path] like '%' + @Path + '%'
order by C.[Path]
The other observation that I have is that my CPU utilization goes up from 25% to over 50% when I kick this off. So, it is definitely getting confused about something...
Thank you for your feedback,
Chris

Brad,
I am not sure how to attach the rdl, so here it is inline.
The one thing that is strange is that my test SSRS 2012 SP2 server (Windows 2008R2) the report works. However, their is a difference in the OS. The production server is Windows 2012
The report works in Visual Studio, it works in Firefox, it works in Chrome. Just not in SSRS 2012 SP2 on Windows 2012.
Thanks
<?xml version="1.0" encoding="utf-8"?>
<Report xmlns="http://schemas.microsoft.com/sqlserver/reporting/2008/01/reportdefinition" xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner">
<Body>
<ReportItems>
<Tablix Name="table1">
<TablixBody>
<TablixColumns>
<TablixColumn>
<Width>4.125in</Width>
</TablixColumn>
<TablixColumn>
<Width>2.75in</Width>
</TablixColumn>
<TablixColumn>
<Width>2.625in</Width>
</TablixColumn>
<TablixColumn>
<Width>0.83333in</Width>
</TablixColumn>
<TablixColumn>
<Width>0.83333in</Width>
</TablixColumn>
<TablixColumn>
<Width>0.83333in</Width>
</TablixColumn>
</TablixColumns>
<TablixRows>
<TablixRow>
<Height>0.18in</Height>
<TablixCells>
<TablixCell>
<CellContents>
<Textbox Name="textbox1">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>Email Addresses</Value>
<Style>
<FontSize>8pt</FontSize>
<FontWeight>Bold</FontWeight>
<TextDecoration>Underline</TextDecoration>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>textbox1</rd:DefaultName>
<ZIndex>11</ZIndex>
<Style>
<BottomBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</BottomBorder>
<BackgroundColor>White</BackgroundColor>
<VerticalAlign>Bottom</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCell>
<TablixCell>
<CellContents>
<Textbox Name="textbox2">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>Path</Value>
<Style>
<FontSize>8pt</FontSize>
<FontWeight>Bold</FontWeight>
<TextDecoration>Underline</TextDecoration>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>textbox2</rd:DefaultName>
<ZIndex>10</ZIndex>
<Style>
<BottomBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</BottomBorder>
<BackgroundColor>White</BackgroundColor>
<VerticalAlign>Bottom</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCell>
<TablixCell>
<CellContents>
<Textbox Name="textbox3">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>Name</Value>
<Style>
<FontSize>8pt</FontSize>
<FontWeight>Bold</FontWeight>
<TextDecoration>Underline</TextDecoration>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>textbox3</rd:DefaultName>
<ZIndex>9</ZIndex>
<Style>
<BottomBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</BottomBorder>
<BackgroundColor>White</BackgroundColor>
<VerticalAlign>Bottom</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCell>
<TablixCell>
<CellContents>
<Textbox Name="textbox4">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>Start Date</Value>
<Style>
<FontSize>8pt</FontSize>
<FontWeight>Bold</FontWeight>
<TextDecoration>Underline</TextDecoration>
</Style>
</TextRun>
</TextRuns>
<Style>
<TextAlign>Center</TextAlign>
</Style>
</Paragraph>
</Paragraphs>
<rd:DefaultName>textbox4</rd:DefaultName>
<ZIndex>8</ZIndex>
<Style>
<BottomBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</BottomBorder>
<BackgroundColor>White</BackgroundColor>
<VerticalAlign>Bottom</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCell>
<TablixCell>
<CellContents>
<Textbox Name="textbox10">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>End Date</Value>
<Style>
<FontSize>8pt</FontSize>
<FontWeight>Bold</FontWeight>
<TextDecoration>Underline</TextDecoration>
</Style>
</TextRun>
</TextRuns>
<Style>
<TextAlign>Center</TextAlign>
</Style>
</Paragraph>
</Paragraphs>
<rd:DefaultName>textbox10</rd:DefaultName>
<ZIndex>7</ZIndex>
<Style>
<BottomBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</BottomBorder>
<BackgroundColor>White</BackgroundColor>
<VerticalAlign>Bottom</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCell>
<TablixCell>
<CellContents>
<Textbox Name="textbox13">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>Modified Date</Value>
<Style>
<FontSize>8pt</FontSize>
<FontWeight>Bold</FontWeight>
<TextDecoration>Underline</TextDecoration>
</Style>
</TextRun>
</TextRuns>
<Style>
<TextAlign>Center</TextAlign>
</Style>
</Paragraph>
</Paragraphs>
<rd:DefaultName>textbox13</rd:DefaultName>
<ZIndex>6</ZIndex>
<Style>
<BottomBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</BottomBorder>
<BackgroundColor>White</BackgroundColor>
<VerticalAlign>Bottom</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCell>
</TablixCells>
</TablixRow>
<TablixRow>
<Height>0.18in</Height>
<TablixCells>
<TablixCell>
<CellContents>
<Textbox Name="email_line">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Fields!email_line.Value</Value>
<Style>
<FontSize>8pt</FontSize>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>email_line</rd:DefaultName>
<ZIndex>5</ZIndex>
<Style>
<TopBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</TopBorder>
<BottomBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</BottomBorder>
<LeftBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</LeftBorder>
<RightBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</RightBorder>
<VerticalAlign>Bottom</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCell>
<TablixCell>
<CellContents>
<Textbox Name="Path">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Fields!Path.Value</Value>
<Style>
<FontSize>8pt</FontSize>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>Path</rd:DefaultName>
<ZIndex>4</ZIndex>
<Style>
<TopBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</TopBorder>
<BottomBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</BottomBorder>
<LeftBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</LeftBorder>
<RightBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</RightBorder>
<VerticalAlign>Bottom</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCell>
<TablixCell>
<CellContents>
<Textbox Name="Name">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Fields!Name.Value</Value>
<Style>
<FontSize>8pt</FontSize>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:DefaultName>Name</rd:DefaultName>
<ZIndex>3</ZIndex>
<Style>
<TopBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</TopBorder>
<BottomBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</BottomBorder>
<LeftBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</LeftBorder>
<RightBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</RightBorder>
<VerticalAlign>Bottom</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCell>
<TablixCell>
<CellContents>
<Textbox Name="StartDate">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Fields!StartDate.Value</Value>
<Style>
<FontSize>8pt</FontSize>
<Format>d</Format>
</Style>
</TextRun>
</TextRuns>
<Style>
<TextAlign>Center</TextAlign>
</Style>
</Paragraph>
</Paragraphs>
<rd:DefaultName>StartDate</rd:DefaultName>
<ZIndex>2</ZIndex>
<Style>
<TopBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</TopBorder>
<BottomBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</BottomBorder>
<LeftBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</LeftBorder>
<RightBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</RightBorder>
<VerticalAlign>Bottom</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCell>
<TablixCell>
<CellContents>
<Textbox Name="EndDate">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Fields!EndDate.Value</Value>
<Style>
<FontSize>8pt</FontSize>
<Format>d</Format>
</Style>
</TextRun>
</TextRuns>
<Style>
<TextAlign>Center</TextAlign>
</Style>
</Paragraph>
</Paragraphs>
<rd:DefaultName>EndDate</rd:DefaultName>
<ZIndex>1</ZIndex>
<Style>
<TopBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</TopBorder>
<BottomBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</BottomBorder>
<LeftBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</LeftBorder>
<RightBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</RightBorder>
<VerticalAlign>Bottom</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCell>
<TablixCell>
<CellContents>
<Textbox Name="ModifiedDate">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Fields!ModifiedDate.Value</Value>
<Style>
<FontSize>8pt</FontSize>
<Format>d</Format>
</Style>
</TextRun>
</TextRuns>
<Style>
<TextAlign>Center</TextAlign>
</Style>
</Paragraph>
</Paragraphs>
<rd:DefaultName>ModifiedDate</rd:DefaultName>
<Style>
<TopBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</TopBorder>
<BottomBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</BottomBorder>
<LeftBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</LeftBorder>
<RightBorder>
<Color>Black</Color>
<Style>Solid</Style>
<Width>1pt</Width>
</RightBorder>
<VerticalAlign>Bottom</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</CellContents>
</TablixCell>
</TablixCells>
</TablixRow>
</TablixRows>
</TablixBody>
<TablixColumnHierarchy>
<TablixMembers>
<TablixMember />
<TablixMember />
<TablixMember />
<TablixMember />
<TablixMember />
<TablixMember />
</TablixMembers>
</TablixColumnHierarchy>
<TablixRowHierarchy>
<TablixMembers>
<TablixMember>
<FixedData>true</FixedData>
<KeepWithGroup>After</KeepWithGroup>
<RepeatOnNewPage>true</RepeatOnNewPage>
<KeepTogether>true</KeepTogether>
</TablixMember>
<TablixMember>
<Group Name="table1_Details_Group">
<DataElementName>Detail</DataElementName>
</Group>
<TablixMembers>
<TablixMember />
</TablixMembers>
<DataElementName>Detail_Collection</DataElementName>
<DataElementOutput>Output</DataElementOutput>
<KeepTogether>true</KeepTogether>
</TablixMember>
</TablixMembers>
</TablixRowHierarchy>
<DataSetName>email</DataSetName>
<Height>0.36in</Height>
<Width>11.99999in</Width>
<Style />
</Tablix>
</ReportItems>
<Height>0.36in</Height>
<Style />
</Body>
<Width>12in</Width>
<Page>
<PageFooter>
<Height>0.25in</Height>
<PrintOnFirstPage>true</PrintOnFirstPage>
<PrintOnLastPage>true</PrintOnLastPage>
<ReportItems>
<Textbox Name="textbox8">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Globals!ReportFolder & "/" & Globals!ReportName & "/" & User!UserID</Value>
<Style>
<FontSize>8pt</FontSize>
</Style>
</TextRun>
</TextRuns>
<Style>
<TextAlign>Right</TextAlign>
</Style>
</Paragraph>
</Paragraphs>
<Left>8in</Left>
<Height>0.25in</Height>
<Width>4in</Width>
<Style>
<VerticalAlign>Bottom</VerticalAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</ReportItems>
<Style />
</PageFooter>
<LeftMargin>1in</LeftMargin>
<RightMargin>1in</RightMargin>
<TopMargin>1in</TopMargin>
<BottomMargin>1in</BottomMargin>
<Style />
</Page>
<AutoRefresh>0</AutoRefresh>
<DataSources>
<DataSource Name="SQL_ReportServer">
<DataSourceReference>SQL_ReportServer</DataSourceReference>
<rd:SecurityType>None</rd:SecurityType>
<rd:DataSourceID>77e94914-07c8-421a-b785-a126cad0d6ac</rd:DataSourceID>
</DataSource>
</DataSources>
<DataSets>
<DataSet Name="email">
<Query>
<DataSourceName>SQL_ReportServer</DataSourceName>
<QueryParameters>
<QueryParameter Name="@Email">
<Value>=Parameters!Email.Value</Value>
</QueryParameter>
<QueryParameter Name="@Path">
<Value>=Parameters!Path.Value</Value>
</QueryParameter>
</QueryParameters>
<CommandText>WITH [EMAIL]([SubscriptionID], [EmailLine]) AS
SELECT I.[SubscriptionID],
I1.rows.value('Value [1]', 'VARCHAR(MAX)') AS [EmailLine]
FROM (
--if the Subscription is an e-mail, get the XML fragment which contains the Email line
SELECT S.[SubscriptionID],
--add a "root" element to create well-formed XML to the "ExtensionSettings"
--(in case it's NULL)
CONVERT(XML, N'<Root>' + CONVERT(NVARCHAR(MAX), S.[ExtensionSettings]) + N'</Root>') AS [ExtensionSettings]
FROM ReportServer.dbo.[Subscriptions] S WITH (NOLOCK)
WHERE --only get e-mail subscriptions
S.[DeliveryExtension] = 'Report Server Email'
) I CROSS APPLY
--pull out elements in the "ParameterValues/ParameterValue" hierarchy
I.ExtensionSettings.nodes('/Root/ParameterValues/ParameterValue') AS I1(rows)
WHERE --only get the Subject field
--I1.rows.value('Name [1]', 'VARCHAR(100)') = 'Subject'
I1.rows.value('Name [1]', 'VARCHAR(100)') IN ('TO', 'BCC','CC')
--get subscription data for all users
SELECT replace([EMAIL].[EmailLine], '@plu.edu','') email_line,
--internally put-together description of subscription
-- S.[Description],
--user-friendly message for what happened the last time the subscription ran
--which may be "New Subscription"
--report path and name
C.[Path], C.[Name],
--start date and end date for schedule
SC.[StartDate], SC.[EndDate],
--when the subscription was modified
S.[ModifiedDate]
FROM --actual subscriptions
ReportServer.dbo.[Subscriptions] S WITH (NOLOCK) LEFT OUTER JOIN
--report details from Catalog
ReportServer.dbo.[Catalog] C WITH (NOLOCK) ON
S.[Report_OID] = C.[ItemID] LEFT OUTER JOIN
--Users (owner)
ReportServer.dbo.[Users] [U1] WITH (NOLOCK) ON
S.[OwnerID] = [U1].[UserID] LEFT OUTER JOIN
--Users (modified by)
ReportServer.dbo.[Users] [U2] WITH (NOLOCK) ON
S.[ModifiedByID] = [U2].[UserID] LEFT OUTER JOIN
--Subscription Schedules
ReportServer.dbo.[ReportSchedule] RS WITH (NOLOCK) ON
S.[SubscriptionID] = RS.[SubscriptionID] LEFT OUTER JOIN
--Schedules
ReportServer.dbo.[Schedule] SC WITH (NOLOCK) ON
RS.[ScheduleID] = SC.[ScheduleID] LEFT OUTER JOIN
--Subjects CTE from e-mail subscriptions
[EMAIL] ON
S.[SubscriptionID] = [EMAIL].[SubscriptionID]
WHERE EmailLine is not null
and EmailLine like '%' + @Email + '%'
and C.[Path] like '%' + @Path + '%'
order by C.[Path]</CommandText>
<rd:UseGenericDesigner>true</rd:UseGenericDesigner>
</Query>
<Fields>
<Field Name="email_line">
<DataField>email_line</DataField>
<rd:TypeName>System.String</rd:TypeName>
</Field>
<Field Name="Path">
<DataField>Path</DataField>
<rd:TypeName>System.String</rd:TypeName>
</Field>
<Field Name="Name">
<DataField>Name</DataField>
<rd:TypeName>System.String</rd:TypeName>
</Field>
<Field Name="StartDate">
<DataField>StartDate</DataField>
<rd:TypeName>System.DateTime</rd:TypeName>
</Field>
<Field Name="EndDate">
<DataField>EndDate</DataField>
<rd:TypeName>System.DateTime</rd:TypeName>
</Field>
<Field Name="ModifiedDate">
<DataField>ModifiedDate</DataField>
<rd:TypeName>System.DateTime</rd:TypeName>
</Field>
</Fields>
</DataSet>
</DataSets>
<ReportParameters>
<ReportParameter Name="Email">
<DataType>String</DataType>
<AllowBlank>true</AllowBlank>
<Prompt>Email Like (e.g allen):</Prompt>
</ReportParameter>
<ReportParameter Name="Path">
<DataType>String</DataType>
<DefaultValue>
<Values>
<Value>%</Value>
</Values>
</DefaultValue>
<Prompt>Path like (e.g Advancement):</Prompt>
</ReportParameter>
<ReportParameter Name="Report_Parameter_2">
<DataType>Boolean</DataType>
<AllowBlank>true</AllowBlank>
<Prompt>Parameter OK?</Prompt>
</ReportParameter>
</ReportParameters>
<Language>en-US</Language>
<ConsumeContainerWhitespace>true</ConsumeContainerWhitespace>
<rd:ReportUnitType>Inch</rd:ReportUnitType>
<rd:ReportID>811078db-33dd-4670-9df4-be748e9ec2ef</rd:ReportID>
</Report>

My compiled program crashes after first run (LabVIEW 2009)

I have a compiled program created with LabVIEW 2009 that on the first run after the computer is re-booted will work fine but after shutting down the program it will not run properly.
The program uses a compiled launcher to dynamically activate a set of VI's containing Queue Driven State Machines (QDSM). On subsequent program starts the launcher module comes up fine and its progress bar shows that it is launching each of the VI's. Once the launcher is complete it removes itself from memory leaving the dynamically launched VI's running. The subsequent launches which fail the main user interface VI pops up barely long enough for the observer to see (if at all) then shuts down. The program is then gone from memory as far as I can tell. There are no processes in memory or anything.
Additionally, the when I try to run the installed version of the exe on a computer that has the 2009 development environment installed I get this behavior consistently with a successful run even once.
In both cases my program does not throw any errors (which are logged) nor does the runtime engine generate any that I can see. Also, when I run my program in the development environment the program does not behave this way. It has no problems at all.
I have used this style of architecture before in LV8.6 with out any problems. Can anyone suggest some possible solutions or even some debugging tips? I have never had a problem that I could not duplicate in the development environment so I am unsure how begin attacking my issue.
Thanks for any help.
Jason
Wire Warrior
Behold the power of LabVIEW as my army of Roomba minions streaks across the floor!
Solved!
Go to Solution.

I have solved the problem I think (at least as far as testing to this point has revealed). After I added in the ability to log the states passed to the QDSM's, I was able to determine that the program was "crashing" after I dynamically closed the front panel of the launcher. My program was designed to close the front panel of the launcher then pop-up the front panel of the main UI. My EXE is built on to contain the launcher with my other QDSM files being maintained externally in specific directories. What appeared to be happening is that when the launcher closed its front panel and before the UI opened up the run-time engine would decide since there were no windows open it would close itself down. This is my supposition about what may be happening any way. I modified my code to changed the launcher window to hidden and delay for 1/2 a second to give the main UI a chance to start fully running. This fixed the problem, or at least worked around it. If someone out there can explain to me exactly what is happening I sure would appreciate it.
Thanks for all the help those of you who responded. Your advice was very beneficial and certainly led me to a resolution faster.
Jason
Wire Warrior
Behold the power of LabVIEW as my army of Roomba minions streaks across the floor!

SQLDeveloper 3.0 EA1 - Report Toolbar disappears after second run

About
Oracle SQL Developer 3.0.02
Version 3.0.02
Build MAIN-02.37
Copyright © 2005,2010 Oracle. All Rights Reserved.
IDE Version: 11.1.1.4.37.58.38
Product ID: oracle.sqldeveloper
Product Version: 11.1.2.02.37
Version
Component     Version
=========     =======
Java(TM) Platform     1.6.0_11
Oracle IDE     3.0.02.37
Versioning Support     3.0.02.37
When running a user defined report the first time it shows the tab toolbar (freeze view, run report, etc) but when a new report is opened in the same tab the toolbar disappears.
In order to show again the toolbar I need to close the tab, right click the report name -> Open and the new tab will contain the toolbar.
Verified with version 2.1 and there the toolbar is always displayed.

Thanks. I ran out of time to fix this one it's logged and on the list.
-kris

Multi Layered Drill automatically goes to lowest level after first run

Hi there,
I'm using Xcelsius Engage 5.3.0.0.
I have 3 combo charts each at a different level in drill down.
Chart1: Faculty Level
Chart2: Department Level
Chart3: Discipline Level
So 1 faculty can contain many departments and one department can contain many disciplines.
Each graph dynamically appears over the other as the user drills down to level 3. I use "back" buttons using push buttons to clear previous input from the chart drill downs.
My problem is that the drill down functionality works perfectly the FIRST TIME THROUGH but any time after that, it always drills through to the lowest level from the top automatically without letting me see Chart2.
For example, if I drill on a faculty into the department chart and then select a department and drill into the discipline level that works fine. I then press back and am returned to the department level chart, click back one more time and am returned to the faculty level again. HOWEVER, once I select a different faculty to drill down on, I'm immediately shipped to the 3rd (discipline level) of that faculty.
I've noticed that after it's worked properly the first time through, when I'm "backing out" using the push buttons and going back past the level 2 chart, a department is still highlighted as selected (even though all graphs involved are set to no default selection). So when I back out and select a different faculty I think department level chart still highlighted as selected is having an effect and Xcelsius thinks a user is clicking on a department so it ships me right off to the lowest level.
I've done some googling and others are having the exact same problem I'm having:
http://www.forumtopics.com/busobj/viewtopic.php?p=797270#797270
I'd love a work around that doesn't involve the reset button.
Thanks.

http://www.forumtopics.com/busobj/viewtopic.php?p=797995
Another of the same issue.
Is there a bug fix or where can I submit this to be reviewed?

Keyboard disappears after first letter

SSince the IOS 8 update every time I start in Google after typing 1st letter the keyboard disappears whilst in landscape mode.
i Have read about changing the settings whilst in Google but that doesn't work.
any idea when this will be fixed in an update,

Thanks for the reply, but i don't think this will solve the problem.
Here is some more detail: - it happened at the same time ( when updating to iOS8 ) on the iPad and the iPad mini.
- i believe this shows that is definitely the updated OS that causes the problem.
Also there are more "glitches" as well, like unable to update apps using wifi.
When the notification appears on the App Store logo, and i check which apps need updating, followed by "update all",
the small circle keeps turning ( the square does not appear in the middle)... signing in or not doesn't make any difference.
When i sync with the iMac, it shows that the apps are updating but the notification remains. The only way i managed to
clear that is to delete the app and reinstall it again. Very frustrating.... All this never happened with iOS7.
At this time, the iPad has no apps, no photos, no videos... just as when it was new, following the restore, but i still get
the disappearing cursor on Safari ! Amazing !
Regards,
Jeevsyboy

Testing Report's data on OOTB Reports after first Run

Hi Gurus,
I am getting Data in the Financial Analytics Reports after doing all the required configurations, but how do i test if the data thats coming is correct.
( I think somebody needs to create and fire the SQL in EBS database and recreate the same exact report from sql)
But for this, one should be well versed with the Payables, Receivables and General Ledger Data model..
Should this testing be done by an OBIA Consultant?
Need guidance here , as i am the only one doing all the stuff here... and its overwhelming with the amount of knowledge and work required.
My source is EBS R 12.1.3
BI Apps version is 7.9.6.4
OBIEE 11.1.1.6.11
Thanks
Ashish

Hi Ashish,
I am implementing OBIA financial analytics 7.9.6.4 for EBS R12.1.3
can u please share your experience as i am new to obiee.
completed installation and started setups in DAC and informatica.
could you please share any doc's related to configuration([email protected]).
looking forward for your help.
Regards,
Sreekar

Audio disappears after first half hour

I burned a 60 minute tv show in iDVD, which plays and sounds fine in preview, but when you play the burned dvd, the audio is gone from about the 35 minute mark on (picture fine, last 25 minutes of audio missing) Any ideas???

Hi
May be there is some help here:
*Not knowing the origin to Your problem - General approach when in trouble is as follows:*
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Hard disk is untidy: Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Delete iDVD pref file - *or rather start a new user/account* - log into this and re-try
• Program miss-match: iDVD 5.0.2, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK - DON’T work under Leopard
• Program miss-match: iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
• Program miss-match: iDVD’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
• iDVD (08) v7 Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
• Try a Cleaning CD/DVD that cleans the laser lens on the DVD burner/player
iDVD 6.0.4 and iDVD 7.0.1 are compatible with Mac OS X 10.5 Leopard
iDVD pref file resides: Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences and is named:
com.apple.iDVD.plist
While iDVD is NOT RUNNING - move this file out to desk-top.
Now restart iDVD.
Last resort: from Craig: Solved the problem!! Finally!!
I deleted every iDVD application and folder from my boot drive,
emptied the trash and then installed iDVD 08 using the customize option
and I am up and running.
Yours Bengt W

Music disappeared after first sync with iOS 7

I synced my iPad 2 to my Windows 7 computer for the first time since I downloaded iOS 7 and now, 90% of my music is greyed out in my music library. And when I plug it into my computer and try to play the song from my iPad in iTunes, it shows the exclamation point in a circle. Help!!

oh yes and on a related note all the calendars that once synced to the iPod are now gone on the iPod. only the 2 calendar items i created on the iPod are there, and they are NOT in the iCal itself.

New PC, iTunes library in external disk, ruined after first run

Hello,
I built a new PC with Windows 7 64-bit and previously I had my iTunes library directory pointing to an external HDD while in the old system Windows XP 32-bit. I now tried to point the new iTunes installation to my old iTunes library in the external HDD and iTunes would not "see" the library meaning the play lists and music would not appear in the new iTunes installation.
So I was looking around for options in iTunes and found the main option "Import library from My Music" and this messed up my old library completely and didnt include the old Play lists in the iTunes ready for synchronizing with my iPhone. It messed up the old folder entirely overwriting everything ... how dumb iTunes can be?
At this point I had to delete the whole iTunes library and the master copy of my old library is only in my iPhone which I don't want to synchronize with the new computer and iTunes library because I would lose everything. How can I bring back my library to the new PC and iTunes installation from the iPhone? seems not possible? another jail from Apple?
Seriously, I have many products from Apple and have always been happy except for the iTunes which I think is their "Black Sheep" so to speak, I would buy and use it more if it wasn't such a jailing and pain in the arse.
TIA,
Best regards,
Giovanni

It would seem your original problem was caused by having only the media folder on the external drive rather than a complete working iTunes library. It is unfortunate that you have deleted the media that was on the drive as you have created more work than would otherwise be the case. If it is not to late to undelete the media folder you should do that as it would cut down the work you have to do. If you have access to a backup copy of your user's documents folder from your old computer that would also prove useful. Either way this user tip should provide all the information needed to recover your library.
Recovering your iTunes library from your iPod or iOS device.
tt2

All my Photos disappeared after I saved a photo from an email from my wife. I am running Mountain lion on Mac book pro 2012, help. What did I do wrong?

All my Photos disappeared after I saved a photo to Iphoto from an email from my wife. I am running Mountain lion on Mac book pro 2012, help. What did I do wrong?

Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

I run 3 email accounts on Mac Mail, all 3 disappeared after doing the latest OS X update. I have tried adding the accounts back but no mail appears. Help!

I run 3 email accounts on Mac Mail, all 3 disappeared after doing the latest OS X update. I have tried adding the accounts back but no mail appears. Help!

The mailbox list is divided into categories with headings in caps, such as ON MY MAC. When you hover the cursor over one of those headings (except for MAILBOXES), you should see the word Show or Hide on the right. Click Show. The MAILBOXES category can't be hidden.
In each category, the mailboxes are arranged in groups, such as Inbox. To the left of each group is a small disclosure triangle. If the triangle points to the right, click it so that it points down.

Safari won't start on Windows XP after the first run

OK, Safari used to work on my work PC. Now when I install it, Safari launches and seems to work. But after I close it, it won't start again - just dies and does nothing.
I noticed in another thread that .net framework may be the culprit and I have 1,2,3 installed. I have removed safari and re-added and the same thing happens. iTunes seems to work with no issues.

OK, Safari used to work on my work PC. Now when I install it, Safari launches and seems to work. But after I close it, it won't start again - just dies and does nothing.
Some basic principle troubleshooting thoughts here.
Are you able to launch Safari (after that first run) if you restart the PC and then try launching again?
I'm wondering here if the Safari.exe process is still running even though Safari looks like it has quit correctly. If that's what is going on, the running Safari.exe can "suppress" attempts to relaunch Safari. If that's afoot, restarting the PC should shut down the process, and we might be able to get Safari to launch then.

Firefox Always "First Run" After Reboot or Log off The PC.

Firefox Always "First Run" After Reboot or Log off The PC, No Deepfreeze. I have scanned the PC and no virus. How To fix that?

Firefox Always "First Run" After Reboot or Log off The PC, No Deepfreeze. I have scanned the PC and no virus. How To fix that?

In the far left hand column, Devices keeps disappearing. I can get it back by downloading iTunes again but disappears again after I run disk utility.

In the far left hand column, Devices keeps disappearing. I can get it back by downloading iTunes again but disappears again after I run disk utility.

With a Device plugged in - place your mouse cursor over DEVICES - you should see 'show' or 'hide'. Click on 'show'.
MJ

Wpdomain.db disappears after first run of MTA on Linux

Similar Messages

Maybe you are looking for