Write to mesaurement file error

Okay, this question has been asked various times with different solutions but nos of those solution seems to help me.
I start the VI, begins recording automatically wihtout any problem, it creates the file and the folder etc... but when I pause the recording and then unpaused it shows the following error and shows no path
I
this is the block dia.
Like I said, I tried different post it solution and nothing.
Thanks,
Roddy

You will need to keep up with the file name and send it through when you restart your code. I would also make sure that it is not getting reinitialized when you restart it.
Tim
Johnson Controls
Holland Michigan

Similar Messages

I've just opened iTunes on my Mac with an error "The iTunes Library.itl file is locked, on a locked disk, or you do not have write permission for this file.". I created a shirred library so that all users on my Mac can access the same library. Help?

I have just opened ITunes on my Mac and the following error occurred "The iTunes Library.itl file is locked, on a locked disk, or you do not have write permission for this file.". When I setup my Mac I created a shared user area to contain my ITunes library so that I could share it with another user logged onto my Mac. However the error above gives me the impression that the library file is locked... I've checked and it does not seem to be locked under the "get info" fie information. Has anyone come across this before and found a solution?

You also need to make sure you have both read and write permission for the file, or for the whole iTunes folder for that matter. That's also done in Get Info for the file or folder concerned.
Read the part about changing permissions on the iTunes folder in: https://discussions.apple.com/message/11583914

I receive the follwing error message when trying to open my ipod touch/itunes "the itunes libary.itlfile is lockedon a lockdisk or you do not have write permission on this file. How do I resolve this problem?

I receive the follwing error message when trying to open my ipod touch/itunes "the itunes libary.itlfile is lockedon a lockdisk or you do not have write permission on this file. How do I resolve this problem?

Repair iTunes Security Permissions
Right-click on your main iTunes folder and click Properties, then go to the Securitytab and click Advanced. Use the Change Permissions... button grant to your account (or the Users group) and SYSTEM full control of this folder, subfolders and files, then tick the option to Replace permissions entries... which will repair permissions throughout the library. When complete switch to the General tab, click in the Read-only check box to clear it, then click Apply.
If you don't have the option to change the permissions then use the Owner tab and Edit... button to take ownership from an account with administrator privileges. Tick the option to Replace owner on subcontainers and objects.
Repeat with the media folder if it isn't stored inside the main iTunes folder.
If you've brought over the library from another computer you may also want to remove any "mystery" identities (S<string of dashes & digts>) that have come over from the old computer...
The images above are from Windows 7. Hopefully the system isn't too different in Windows 8.
tt2

Corrupt file error while writting a file in compress mode

Hello,
I have a scenario where i am writting data in a file in appending mode with filter 'compress' addition using open dataset, on Al11 for the first set of records it works fine but if this file is accessed again for writting data in next select statement ( its between select endselect),the file is getting corrupted, if i try to open this file corrupt file error come. can someone help.
Thanks and Regards,
Gunjan

Hi Gunjan,
Unfortunately, you can't do in that way. The behaviour of that OPEN and FILTER 'compress' clause is to create a compacted file, to be read later, but it can be appended... all your writes go to a pipe and when you close the file this is sent to 'compress' program or other filter and than a compacted file is created.
You can't go back and start inserting again after close it.
Follow documentation:
http://help.sap.com/abapdocu_70/en/ABAPOPEN_DATASET_OS_ADDITION.htm
The addition FILTER must not be used together with the addition AT POSITION or for the access type FOR UPDATE.
Regards, Fernando Da Ró

I cannot open iTunes on my Macbook I'm getting the error message saying "the itunes library il locked or you do not have write permission for this file" what do i do to fix it?

I cannot open iTunes on my Macbook I'm getting the error message saying "the itunes library is locked or you do not have write permission for this file" what do I do to fix it?

Do #6 here
..Step by Step to fix your Mac

Load blob to file. error: file write error

Hi,
I used procedure witch load blob to file. It's working at Oracle 10g, but its does't work on oracle 11g. Why?
create or replace PROCEDURE load_blob_to_bfile (p_file_id IN VARCHAR2, p_directory IN VARCHAR2, p_ident in varchar2 default NULL)
IS
v_blob BLOB;
v_start NUMBER := 1;
v_bytelen NUMBER := 2000;
v_len NUMBER;
v_raw RAW (2000);
v_x NUMBER;
v_output UTL_FILE.file_type;
v_file_name VARCHAR2 (200);
BEGIN
-- get length of blob
SELECT DBMS_LOB.getlength (blob_content), filename
INTO v_len, v_file_name
FROM wwv_flow_files
WHERE filename = p_file_id;
-- define output directory
v_output := UTL_FILE.fopen (p_directory, p_ident||'_'||v_file_name, 'wb', 32760);
-- save blob length
v_x := v_len;
-- select blob into variable
SELECT blob_content
INTO v_blob
FROM wwv_flow_files
WHERE filename = p_file_id;
v_start := 1;
WHILE v_start < v_len AND v_bytelen > 0
LOOP
DBMS_LOB.READ (v_blob, v_bytelen, v_start, v_raw);
UTL_FILE.put_raw (v_output, v_raw);
UTL_FILE.fflush (v_output);
/* Text only could be: UTL_RAW.cast_to_varchar2 (v_raw);*/
-- set the start position for the next cut
v_start := v_start + v_bytelen;
-- set the end position if less than 32000 bytes
v_x := v_x - v_bytelen;
IF v_x < 2000
THEN
v_bytelen := v_x;
END IF;
END LOOP;
UTL_FILE.fclose (v_output);
END;
directories is creaited and granted for read and write. It looks like file is created, but application rise the write file error, and files in directory is emty.
TomasB

So, I'm copying the file in a temp. BLOB with this function:
FUNCTION get_remote_binary_data (p_conn IN OUT NOCOPY UTL_TCP.connection,
p_file IN VARCHAR2)
RETURN BLOB IS
l_conn UTL_TCP.connection;
l_amount PLS_INTEGER;
l_buffer RAW(32767);
l_data BLOB;
BEGIN
DBMS_LOB.createtemporary (lob_loc => l_data,
CACHE => TRUE,
dur => DBMS_LOB.CALL);
l_conn := get_passive(p_conn); //get a passive connection
send_command(p_conn, 'RETR ' || p_file, TRUE); //send Retrieve command to server
BEGIN
LOOP
l_amount := UTL_TCP.read_raw (l_conn, l_buffer, 32767);
DBMS_LOB.writeappend(l_data, l_amount, l_buffer);
END LOOP;
EXCEPTION
WHEN UTL_TCP.END_OF_INPUT THEN
NULL;
WHEN OTHERS THEN
NULL;
END;
UTL_TCP.close_connection(l_conn);
get_reply(p_conn);
RETURN l_data;
END;
Then I'm writing it into a local file:
PROCEDURE put_local_binary_data (p_data IN BLOB,
p_dir IN VARCHAR2,
p_file IN VARCHAR2) IS
l_out_file UTL_FILE.FILE_TYPE;
l_buffer RAW(32767);
l_amount BINARY_INTEGER;
l_pos INTEGER := 1;
l_blob_len INTEGER;
BEGIN
l_blob_len := DBMS_LOB.getlength(p_data);
l_amount := DBMS_LOB.GETCHUNKSIZE(p_data);
IF (l_amount >= 32767) THEN
l_amount := 32767;
END IF;
l_out_file := UTL_FILE.FOPEN(p_dir, p_file, 'w', 32767);
WHILE l_pos < l_blob_len LOOP
DBMS_LOB.READ (p_data, l_amount, l_pos, l_buffer);
UTL_FILE.put_raw(l_out_file, l_buffer, FALSE);
l_pos := l_pos + l_amount;
END LOOP;
UTL_FILE.FCLOSE(l_out_file);
EXCEPTION
WHEN OTHERS THEN
IF UTL_FILE.IS_OPEN(l_out_file) THEN
UTL_FILE.FCLOSE(l_out_file);
END IF;
RAISE;
END;
I've checked the blob before I'we wrote it ito the file (UTL_FILE.put_raw(l_out_file, l_buffer, FALSE)), and it contains no carriage-return.

Write file error 8

Once the file is created subsequent writes show Error code 8 out of the "Write File" VI LV6. (Cannot upgrade the code at this time). I'm using open/create/Replace File VI along with the Write File VI. Creating the file run OK, once I go back and rerun for a write the "Write File" reports Error code 8. How do I fix this issue.... using LV6.

The file created by the open/create/Replace VI attributes are NOT set to READ ONLY. See the pic below. If the LV creates the file it should be able to subsequently write to the same file. Once again this is LV version 6. It didn't work this way before... I took a look at a few things in the code and noticed this anomaly.
BTW, there are root or branch level folder showing the Read Only attribute is inherited from parent folder... but my whole C drive is this way... but LV should be able to write to the file regardless....
Message Edited by richjoh on 12-22-2009 03:53 PM

Ebook error message: "Fail to write destination file error"

I am attempting to transfer ebooks (checked out via my library's ebook consortium) from Adobe Digital Editions to my Nook. I have done this in the past with no issues, but recently I have been getting the following error message: "Fail to write destination file error".
I know the issue is NOT lack of space on my Nook (I cleared it of all info and still received the error message).

I had this problem as well, and after doing some research via google (because I found NOTHING helpful in adobe forums), I found the problem....my Nook was full. I had no idea this was even possible! But, I borrow a lot of library books, and didn't realize that after they expire, they are still taking up space on my Nook. Here's how to check: plug your Nook into your computer, go to file manager (right-click the start button in Windows), find the Nook drive and right click, choose properties. This should show you a pie chart of used/free space on your Nook. If this is the case, you need to remove some files from your Nook. For me, I had to find the Digital Editions file and delete all the thumbnails and actual files for the library books. If it's booked you've purchased, perhaps you need to archive some books. Hope this helps!

Receiving error itunes Library .itl file is locked or you do not have write permission for this file. This is on Windows 7 pc. any ideas?

I am receiving an error Itunes Library .itl file is locked or you do not have write permission to this file.
Any thoughts on this issue?
Bob

sorry, i don't have the answer, but i think i have the same problem if i may expound:
I did a windows 7 update.... and today i tried to modify some song info in iTuens... I selectd an album with 12 songs in it, right clicked for "Get Info" tied to update album info including year, album artist, etc... but it would not take. I checked the security setting in the windows folder and confirmed i had admin rights etc...still no go...

Error trying to write to a measurement file and then send via gmail.vi

So as the title says, I have a VI which is writing to a tdms file, and I want to send the file by gmail once the program has completed it's run. I downloaded gmail.vi and am integrating it into my existing code. Both my original code and the gmail VI work fine on their own, but when I try to have the combined VI send the data file by email, I get the error message that I've attached.
Basically, it seems like the .tdms data file is in use by the measurement code, and I need to know how to free it up so that the gmail code can attach and send it.
I've attached the main code as well as my modified gmail VI, so hopefully someone can take a look at tell me what I'm missing.
Any help is much appreciate!
Attachments:
Error.PNG ‏19 KB
PID Controller - Cleaned Up.vi ‏239 KB
Email Alert.vi ‏19 KB

While I can't view all of your code because it is missing several SubVIs, I have a good idea of what you are trying to do. I believe the culprit is the "Write to measurement file" express VI. Near as I can tell the original reference to the TDMS file is being held open inside the express VI. Here's a good general rule for using Express VI's: when you see them, RUN THE OTHER WAY! I say because there is almost always a significant amount of code in there that is unnecessary, In this case, you simply need the Open TDMS file, Write to TDMS, Close file functions; you do not need all of the extra code that is in the express VI's.
<edit> P.S. I hope the username/password in Email alert.vi is a placeholder otherwise you just gave every idiot with access to LabVIEW your username and password to the account.
Charles Chickering
Architecture is art with rules.
...and the rules are more like guidelines

HT203167 I get an error message "The iTunes Library.itl file is locked, on a locked disk, or you do not have write permission for this file."....

Hi I have downloaded the latest iTune Software on Windows 7. I went to open the file and it won't execute, I small box keeps popping up with this message:-
"The iTunes library.itl file is locked, on a locked disk, or you do not have write permission for this file".
I have tried to change the permission but nothing happens. Can anyone please give help me or give me some advise how I can fix this problem.
Please email me at [email protected]
Thanking you kindly
Marina Dunn

I have tried both suggestions, unfortunately neither fixed this for me. Hoping there's another possible fix. Thanks in advance.
Empty/corrupt iTunes library after upgrade/crash and/or Repair security permissions for iTunes for Windows.

" Can not interpret the data in file " error while uploading the data in DB

Dear All ,
After running the below report I am getting the " Can not interpret the data in file " error.
Need to upload the data in DB through excel or .txt file.
Kindly advise to resolve the issue.
REPORT ZTEST_4.
data : it like ZPRINT_LOC occurs 0 with header line,
FILETABLE type table of FILE_TABLE,
wa_filetable like line of filetable,
wa_filename type string,
rc type i.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
CHANGING
FILE_TABLE = filetable
RC = rc.
IF SY-SUBRC = 0.
read table filetable into wa_filetable index 1.
move wa_filetable-FILENAME to wa_filename.
Else.
Write: / 'HI'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
start-of-selection.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = wa_filename
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
TABLES
DATA_TAB = it.
IF SY-SUBRC = 0.
Write: / 'HI'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
insert ZPRINT_LOC from table it.
if sy-subrc = 0.
commit work.
else.
rollback work.
endif.
Regards
Machindra Patade
Edited by: Machindra Patade on Apr 9, 2010 1:34 PM

Dear dedeepya reddy,
Not able to upload the excel but have sucess to upload the .csv file to db through the below code. Thanks for your advise.
REPORT ZTEST_3.
         internal table declaration
DATA: itab TYPE STANDARD TABLE OF ZPRINT_LOC,
      wa LIKE LINE OF itab,
      wa1 like line of itab.
                   variable declaration
DATA: v_excel_string(2000) TYPE c,
       v_file LIKE v_excel_string VALUE    'C:\Documents and Settings\devadm\Desktop\test.csv', " name of the file
        delimiter TYPE c VALUE ' '.         " delimiter with default value space
     read the file from the application server
OPEN DATASET v_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
write:/ 'error opening file'.
ELSE.
    WHILE ( sy-subrc EQ 0 ).
      READ DATASET v_file INTO wa.
      IF NOT wa IS INITIAL.
        append wa TO itab.
      ENDIF.
      CLEAR wa.
    ENDWHILE.
ENDIF.
CLOSE DATASET v_file.
EXEC SQL.
     TRUNCATE TABLE "ZPRINT_LOC"
ENDEXEC.
*------display the data from the internal table
LOOP AT itab into wa1.
WRITE:/ wa1-mandt,wa1-zloc_code,wa1-zloc_desc,wa1-zloc,wa1-zstate.
ENDLOOP.
insert ZPRINT_LOC from table itab.

Crystal Server 2013: How to troubleshoot "Can not create temp file---- Error code:-2147215357"

We have a Java7 web app, which generate PDF report by calling Crystal Server 2013 SP4.
The app is being deployed on many different servers. We sometimes got the error below when generating report:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Can not create temp file---- Error code:-2147215357 [CRSDK00000615] Error code name:internal
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.controllerExportInternal(PrintOutputController.java:280)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(PrintOutputController.java:152)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(PrintOutputController.java:130)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(PrintOutputController.java:113)
Problem is, this seems to be a pretty generic exception. It could be caused by many different reasons.
e.g. network connection problem, wrong DB login, wrong folder path, lack of folder access right, etc.
Each time we could only guess what's wrong.
We are running into it again, and this time everything seems correctly configured so far.
We wonder if there are more info we can get to troubleshoot? For example, any log file of Crystal Server we should look into? Or does Crystal Server has debug mode which prints more details to tell us what goes wrong?

Prithviraj Shekhawat wrote:
Hi Henry,
I believe you are using RAS SDKs to export the reports to PDF.
Apply trace on RAS server and check what you find in RAS logs.
Check whether you can see timeout error is RAS logs. Usually if connection is lost and the RAS server no more have the session to write to the temp directory, we do see these errors.
Also, does the account that runs RAS have permissions to create a file in RAS's default temp directory? Are you getting any out of memory or out of disk space exceptions on App server or RAS, tracing RAS server is the way to move forward.
Thanks,
Prithvi
>>I believe you are using RAS SDKs to export the reports to PDF.
Yes
>>Apply trace on RAS server and check what you find in RAS logs.
>>Check whether you can see timeout error is RAS logs.
How to configure tracing, and where are RAS logs? Is it configured in CMC --> Servers --> Crystal Report Services?
>>Also, does the account that runs RAS have permissions to create
>>a file in RAS's default temp directory?
Pretty sure yes.
>> Are you getting any out of memory or out of disk space exceptions
>>on App server or RAS, tracing RAS server is the way to move forward.
Not on App server.
For RAS, that's the problem, I am not sure where to look.......

Can not create temp file---- Error code:-2147215357 [CRSDK00000615] Error code name:internal

Hello,
While exporting Export reporting from BI4 getting exception
Can not create temp file---- Error code:-2147215357 [CRSDK00000615] Error code name:internal
In Trace Log I am getting
com.crystaldecisions.xml.serialization.XMLWriter||Failed to create an object instance for CrystalReports.TextObjectFormat
java.util.MissingResourceException: Can't find resource for bundle java.util.PropertyResourceBundle, key CrystalReports.TextObjectFormat
at java.util.ResourceBundle.getObject(ResourceBundle.java:374)
at java.util.ResourceBundle.getString(ResourceBundle.java:334)
I tried following solution according to the all forums but still issue exist.
Done changes mention in KB article In <Installation-dir-of-BO>\Common\4.0\java\CRConfig.XML we have to increase the JAVA heap MIN and Max size
<JVMMaxHeap>64000000</JVMMaxHeap> <JVMMinHeap>32000000</JVMMinHeap>
Increase the value in the ReportApplicationServer Services in the CMC for "Number of database records to read when previewing or refreshing a report". The value -1 is for unlimited records but not recommended for performance.
Check for temporary read write permission on server
Using SDK library from C:\Program Files (x86)\SAP Business Objects\SAP BusinessObjects Enterprise XI 4.0\java\lib
Can you please let me know is there anything missing.

Hi,
We face the same problem with some BI4 reports.
The same report works well with the "Crystal Reports Viewers API", as used in Infoview, but not with the "Report Application Server (RAS) API".
This error appears after some time working on a report. If we reproduce the same report, but from zero, no problem.
Hope it can help.
Ludovic.

After upgrade to CF9, CFIMAGE "Unable to create temporary file" error

We recently upgraded from CF8 to CF9 Enterprise. I'm getting an "Unable to create temporary file" error on
my CFIMAGE resize calls. We use sandbox security. I assume I need to grant write access to whatever folder CF uses for temp files, but which folder is it? The same code (and sandbox settings) ran fine in CF8....
Note, if I attempt to add C:\JRun4\servers\cfusion\SERVER-INF\temp to the sandbox for this particular app, CF crashes on all requests across all apps on the server with a:
Security: The requested template has been denied access to C:\JRun4\servers\cfusion\cfusion-ear\cfusion-war\WEB-INF\cfclasses\cfapp2ecfc1510154633.c lass.
The following is the internal exception message: access denied (java.io.FilePermission C:\JRun4\servers\cfusion\cfusion-ear\cfusion-war\WEB-INF\cfclasses\cfapp2ecfc1510154633.c lass read)
ColdFusion cannot determine the line of the template that caused this error. This is often caused by an error in the exception handling subsystem.
I need to restart CF to get everything working again.

Another update. Had a problem with a sandboxed CF9 site doing a simple CFIMAGE READ to a memory variable. Got an "Unable to create temporary file" error.
Inserted the following code in the file upload page:
<cfscript>
writeoutput("Temp Dir : " & createobject("java","java.lang.System").getProperty("java.io.tmpdir") );
</cfscript>
... and it reveals the temp directory as C:\WINDOWS\TEMP. Added that to the sandbox, and the CFIMAGE READ is working properly now.
Note this seems inconsistent with CFIMAGE RESIZE behavior which appears to use the CF GetTempDirectory() value, which in my case is C:\JRun4\servers\cfusion\SERVER-INF\temp\cfusion-war-tmp\
For reference, see the section "Sandbox Considerations" at this link:
http://help.adobe.com/en_US/ColdFusion/9.0/Admin/WSc3ff6d0ea77859461172e0811cbf364104-7fc8 .html#WSc3ff6d0ea77859461172e0811cbf364104-7fcc

Write to mesauremen​t file error

Similar Messages

Maybe you are looking for

Write to mesaurement file error