Writing a different set of finite samples at each iteration

Hello,
I have a basic question regarding usage of the DAQmx VI's. How can I configure my code to write a different set of 1D DBL data to the write buffer at each iteration?
Thanks,
John
Attachments:
LIA.vi ‏52 KB

Sorry, I just figured it out (placed a 'Stop' at the beginning of the task).
John

Similar Messages

Keychain- different set of website passwords for each browser?

Lately, Safari 2.0.4 has been stalling on me, so I decided to take a break and use Camino 1.0.2.
When I visit a secure site in Safari, Keychain.app automatically fills in my user information and password.
When I visit the same site in Camino, it asks me if I want it to remember all the information.
Do I really have to visit ALL those websites and re-enter all my passwords again? Is there some way I can get Camino to recognize the passwords I filled in using Safari?
800 mhz Powerbook Mac OS X (10.4.6) 1 GB RAM

If it is the same Apple ID.

Validating different sets of required attributes in an XML schema.

My requirement is to validate an xml with two different validation strategies. In strategy 1, the xml is required to have several instances of an element with certain required attributes. In strategy 2, the xml is required to have several instances of the same element with different required attributes. So, the idea is that there are two different sets of the same element with different set of required attributes for each set. Is there a way to validate this with using only one xsd. My only solution so far is to use two different xsd files to validate. Thank you.

Define an xsd:choice for the 2 elements.

DAQ collecting finite samples despite being set to continuous acquisition mode

Hello,
I've created a vi which reads data from one channel on my USB 6225 OEM device, displays the data to a chart, and writes the data to a .csv file using the write to spreadsheet file vi. The DAQ acquisition mode is set to Continuous Samples; however it behaves as if it were set to N Samples, as the number of data points written to my .csv file is equal to the number specified in the Samples to Read input.
I replaced the DAQmx Assistant vi with the Simulate Signal vi and observed the same behavior. Why does this happen?
Attached below is my vi.
Attachments:
chart time.vi ‏78 KB

When the acquisition mode is set to continuous samples, the samples to read input becomes the buffer size -- not the number of samples read. I expect the DAQ to collect samples until I stop the vi. This is the behavior I have always seen in the past, so don't know why it is any different this time.

How to Show Different set of Blob images in every page

Hi i am using Crystal Report Server XI RAS Embedded Edition to built Dynamic Reports.
Now i have two datasets
1. Main query with imageid field
2. list of image blobs.
this two datasets are linked with imageid field and binded to ReportClientDocument.
i have to show different image fields in every page of the report. this images are differ in width and heights.
i am able to show a single constant image field object from blob database field.
but i could not able to find the solution to show different set of multiple images in different pages of the report.
is there any formulas can be written or kindy give me a solution to achieve this.
Regards,
Padmanaban V
Edited by: Padmanaban Viswanathan on Mar 15, 2010 11:59 AM

See RAS samples [here|https://wiki.sdn.sap.com/wiki/display/BOBJ/NETRASSDK+Samples]. Look for "NET-CS2003_RAS-Managed_BE115_Add_Image" or "NET-VB2003_RAS-Managed_BE115_Add_Image-From-File".
Ludek

Changing from continuous to finite sampling

Hi All,
I'm programming the 6602 with DAQmx 7.4 Ansi C API. This is pretty small issue, but since it might be a bug I thought I'd post it anyway. When I run a counter input task with implicit timing (say period or frequency measurement) in continuous sampling mode everything works fine - the task can be restarted after it has been stopped without any problems. The same goes for finite sampling mode. However, if I run the task in continuous mode, stop it, switch to finite mode and run it again, then it never seems to finish. More specifically, even after all the samples have been read, neither DAQmxIsTaskDone() nor DAQmxGetTaskComplete() indicates that the task is completed. Also, the done event callback function is not executed. Consequently, my thread for reading the data and saving it to file never completes even though all the data is read from the buffer. Anyone know what is going on here? As a workaround, maybe I could monitor the amount of data read from the buffer and stop the task explicitly once the requested number of samples have been collected, but I'd rather have it complete naturally......
Jeff

Hi Axiom-
I have been able to replicate the same behavior you're seeing using NI-DAQmx 7.5, the most recent released version. It seems that this may be an issue and I will file a corrective action request for the issue.
For the timebeing, your suggestion to monitor the number of samples read and programmatically stop the task seems like a solid workaround. Please post back if you have any additional questions.
Thanks for keeping us on our toes!
Tom W
National Instruments

PS CS6 has a different set of installed fonts than my old PS CS4. How do I get my old fonts back? Don't like most of the CS6 fonts. Dell Precision, Windows 7. Does PS use the fonts in the Windows directory or does it use its own? A lot of my preferre

PS CS6 has a different set of installed fonts than my old PS CS4. How do I get my old fonts back? Don't like most of the newer CS6 fonts. Dell Precision, Windows 7. Does PS use the fonts in the Windows directory or does it use its own? If so, where are they in the directory? A lot of my preferred fonts show in the Windows directory but not in Photoshop, which does not display them within the program. Please help. If I get free fonts (NOT CC fonts) from elsewhere, where do I put them for Photoshop[ CS6 to use them? Thanks.

All versions of Photoshop get their fonts from your OS. Just install any missing font wherever Windows keeps fonts.
I don't do windows myself.

I have 2? How do I sync selected photos from my IPad to my IMac w/o losing all photos on my IPad and getting the phoos o my IMac. ou see I have two IMacs with different sets of photos. Also want to convert all Apple works docs to pages docs on my IMac.

I have 2? How do I sync selected photos from my IPad to my IMac w/o losing all photos on my IPad which will be replaced with the photos on my IMac.You see I have two IMacs with different sets of photos. Also want to convert all Apple works docs to pages docs on my IMac. Is there and app available to do the former. many thanks. b

The iPad and related software is designed to sync with only one computer. I suggest transferring the photos from one of your iMacs to the other so that all photos are on one Mac. Same for all other files you want to sync over.
To get those AppleWorks files to the iPad you'll have to determine if Pages will open them. If it will then use the file sharing feature of iTunes to copy them to Pages on your pad.
If Pages will not open the AppleWorks files directly you'll have to save them in some format that Pages will read. These include but may not be limited to Pages and Word formats.

JOIN ON 2 different sets of table depending on the result of first set

 
I have a query where it returns results. I want to join this query to
2 different sets of table depending upon the first set has a result or not.
if first set didnt had a results or records then check for the second set.
SELECT
peo.email_address,
r.segment1 requistion_num,
to_char(l.line_num) line_num,
v.vendor_name supplier,
p.CONCATENATED_SEGMENTS category,
to_char(round((nvl(l.quantity, 0) * nvl(l.unit_price, 0))),'99,999,999,999.99'),
TO_CHAR(l.need_by_date,'MM/DD/YYYY') need_by_date,
pe.full_name requestor,
l.item_description,
pr.segment1 project_num,
t.task_number,
c.segment1,
c.segment2
FROM po_requisition_headers_all r,
 po_requisition_lines_all l,
(SELECT project_id,task_id,code_combination_id, distribution_id,requisition_line_id,creation_date FROM
(SELECT project_id,task_id,code_combination_id,distribution_id,creation_date,requisition_line_id,ROW_NUMBER ()
OVER (PARTITION BY requisition_line_id ORDER BY requisition_line_id,distribution_id ) rn
FROM po_req_distributions_all pod) WHERE rn = 1) d,
gl_code_combinations c,
POR_CATEGORY_LOV_V p,
per_people_v7 pe,
PA_PROJECTS_ALL pr,
PA_TASKS_ALL_V t,
ap_vendors_v v,
WHERE d.creation_date >= nvl(to_date(:DATE_LAST_CHECKED,
'DD-MON-YYYY HH24:MI:SS'),SYSDATE-1)
AND
l.requisition_header_id = r.requisition_header_id
AND l.requisition_line_id = d.requisition_line_id
AND d.code_combination_id = c.code_combination_id
AND r.APPS_SOURCE_CODE = 'POR'
AND l.category_id = p.category_id
AND r.authorization_status IN ('IN PROCESS','PRE-APPROVED','APPROVED')
AND l.to_person_id = pe.person_id
AND pr.project_id(+) = d.project_id
AND t.project_id(+) = d.project_id
AND t.task_id(+) = d.task_id
AND v.vendor_id(+) = l.vendor_id
and r.requisition_header_id in(
SELECT requisition_header_id FROM po_requisition_lines_all pl
GROUP BY requisition_header_id HAVING SUM(nvl(pl.quantity,0) * nvl(pl.unit_price, 0)) >=100000)
group by
peo.email_address,
r.REQUISITION_HEADER_ID,
r.segment1 ,
to_char(l.line_num) ,
v.vendor_name,
p.CONCATENATED_SEGMENTS ,
to_char(round((nvl(l.quantity, 0) * nvl(l.unit_price, 0))),'99,999,999,999.99'),
TO_CHAR(l.need_by_date,'MM/DD/YYYY') ,
pe.full_name ,
l.item_description,
c.segment1,
c.segment2,
pr.segment1 ,
t.task_number
I want to join this query with this first set 
SELECT b.NAME, c.segment1 CO, c.segment2 CC,
 a.org_information2 Commodity_mgr,
 b.organization_id, p.email_address
 FROM hr_organization_information a, hr_all_organization_units b, pay_cost_allocation_keyflex c, per_people_v7 p
 WHERE a.org_information_context = 'Financial Approver Information'
 AND a.organization_id = b.organization_id
 AND b.COST_ALLOCATION_KEYFLEX_ID = c.COST_ALLOCATION_KEYFLEX_ID
 and a.ORG_INFORMATION2 = p.person_id
 AND NVL (b.date_to, SYSDATE + 1) >= SYSDATE
 AND b.date_from <= SYSDATE;
if this doesnt return any result then i need to join the query with the 2nd set
select lookup_code, meaning, v.attribute1 company, v.attribute2 cc,
 decode(v.attribute3,null,null,p1.employee_number || '-' || p1.full_name) sbu_controller,
 decode(v.attribute4,null,null,p2.employee_number || '-' || p2.full_name) commodity_mgr
 from fnd_lookup_values_vl v,
 per_people_v7 p1, per_people_v7 p2
 where lookup_type = 'BIO_FIN_APPROVER_INFO'
 and v.attribute3 = p1.person_id(+)
 and v.attribute4 = p2.person_id(+)
 order by lookup_code
How do i do it?
[pre]

 
I have hard coded the 2 jon sets into one using UNION ALL but if one record exists in both sets how would i diferentiate between the 2 sets.
COUNT(*) will only give the total records.
if there r total 14
suppose first set gives 12 records
second set gives 4 records.
But i want only 14 records which could 12 from set 1 and 2 from set 2 since set1 and set2 can have common records.
SELECT
peo.email_address,
r.segment1 requistion_num,
to_char(l.line_num) line_num,
v.vendor_name supplier,
p.CONCATENATED_SEGMENTS category,
to_char(round((nvl(l.quantity, 0) * nvl(l.unit_price, 0))),'99,999,999,999.99'),
TO_CHAR(l.need_by_date,'MM/DD/YYYY') need_by_date,
pe.full_name requestor,
l.item_description,
pr.segment1 project_num,
t.task_number,
c.segment1,
c.segment2
FROM po_requisition_headers_all r,
 po_requisition_lines_all l,
(SELECT project_id,task_id,code_combination_id, distribution_id,requisition_line_id,creation_date FROM
(SELECT project_id,task_id,code_combination_id,distribution_id,creation_date,requisition_line_id,ROW_NUMBER ()
OVER (PARTITION BY requisition_line_id ORDER BY requisition_line_id,distribution_id ) rn
FROM po_req_distributions_all pod) WHERE rn = 1) d,
gl_code_combinations c,
POR_CATEGORY_LOV_V p,
per_people_v7 pe,
PA_PROJECTS_ALL pr,
PA_TASKS_ALL_V t,
ap_vendors_v v,
WHERE d.creation_date >= nvl(to_date(:DATE_LAST_CHECKED,
'DD-MON-YYYY HH24:MI:SS'),SYSDATE-1)
AND
l.requisition_header_id = r.requisition_header_id
AND l.requisition_line_id = d.requisition_line_id
AND d.code_combination_id = c.code_combination_id
AND r.APPS_SOURCE_CODE = 'POR'
AND l.category_id = p.category_id
AND r.authorization_status IN ('IN PROCESS','PRE-APPROVED','APPROVED')
AND l.to_person_id = pe.person_id
AND pr.project_id(+) = d.project_id
AND t.project_id(+) = d.project_id
AND t.task_id(+) = d.task_id
AND v.vendor_id(+) = l.vendor_id
and r.requisition_header_id in(
SELECT requisition_header_id FROM po_requisition_lines_all pl
GROUP BY requisition_header_id HAVING SUM(nvl(pl.quantity,0) * nvl(pl.unit_price, 0)) >=100000)
group by
peo.email_address,
r.REQUISITION_HEADER_ID,
r.segment1 ,
to_char(l.line_num) ,
v.vendor_name,
p.CONCATENATED_SEGMENTS ,
to_char(round((nvl(l.quantity, 0) * nvl(l.unit_price, 0))),'99,999,999,999.99'),
TO_CHAR(l.need_by_date,'MM/DD/YYYY') ,
pe.full_name ,
l.item_description,
c.segment1,
c.segment2,
pr.segment1 ,
t.task_number
UNION ALL
SELECT
r.segment1 requistion_num,
to_char(l.line_num) line_num,
v.vendor_name supplier,
p.CONCATENATED_SEGMENTS category,
to_char(round((nvl(l.quantity, 0) * nvl(l.unit_price, 0))),'99,999,999,999.99'),
TO_CHAR(l.need_by_date,'MM/DD/YYYY') need_by_date,
pe.full_name requestor,
l.item_description,
pr.segment1 project_num,
t.task_number,
c.segment1,
c.segment2
FROM po_requisition_headers_all r,
 po_requisition_lines_all l,
(SELECT project_id,task_id,code_combination_id, distribution_id,requisition_line_id,creation_date FROM
(SELECT project_id,task_id,code_combination_id,distribution_id,creation_date,requisition_line_id,ROW_NUMBER ()
OVER (PARTITION BY requisition_line_id ORDER BY requisition_line_id,distribution_id ) rn
FROM po_req_distributions_all pod) WHERE rn = 1) d,
gl_code_combinations c,
POR_CATEGORY_LOV_V p,
per_people_v7 pe,
PA_PROJECTS_ALL pr,
PA_TASKS_ALL_V t,
ap_vendors_v v,
fnd_lookup_values_vl flv,
per_people_v7 p1,
per_people_v7 p2
WHERE d.creation_date >= nvl(to_date('11-APR-2008',
'DD-MON-YYYY HH24:MI:SS'),SYSDATE-1)
AND
l.requisition_header_id = r.requisition_header_id
AND l.requisition_line_id = d.requisition_line_id
AND d.code_combination_id = c.code_combination_id
AND r.APPS_SOURCE_CODE = 'POR'
AND l.org_id = 141
AND l.category_id = p.category_id
AND r.authorization_status IN ('IN PROCESS','PRE-APPROVED','APPROVED')
AND l.to_person_id = pe.person_id
AND pr.project_id(+) = d.project_id
AND t.project_id(+) = d.project_id
AND t.task_id(+) = d.task_id
AND v.vendor_id(+) = l.vendor_id
AND flv.attribute1=c.segment1
AND flv.attribute2=c.segment2
AND flv.lookup_type = 'BIO_FIN_APPROVER_INFO'
and flv.attribute3 = p1.person_id(+)
and flv.attribute4 = p2.person_id(+)
and r.requisition_header_id in(
SELECT requisition_header_id FROM po_requisition_lines_all pl
GROUP BY requisition_header_id HAVING SUM(nvl(pl.quantity,0) * nvl(pl.unit_price, 0)) >=100000)
group by
r.REQUISITION_HEADER_ID,
r.segment1 ,
to_char(l.line_num) ,
v.vendor_name,
p.CONCATENATED_SEGMENTS ,
to_char(round((nvl(l.quantity, 0) * nvl(l.unit_price, 0))),'99,999,999,999.99'),
TO_CHAR(l.need_by_date,'MM/DD/YYYY') ,
pe.full_name ,
l.item_description,
c.segment1,
c.segment2,
pr.segment1 ,
t.task_number

Internal and External different set of menu for ESS

Hi
We have 2 portal server - Internal and External. The Portal are being used not.
We are planning to implement ESS now in Portal. We are planning to provide two different set of options when the same user access internally and externally.
For example, User XYZ access internally he will get menus ABCDE but the same user access from external he only gets manu AB.
If anyone has implemented with similar concepts or know how to do it technically, kindly advice.
Thanks
Yuva

Let us assume we have 3 internal groups :
internalGroup_1 -> Role A, Role B
internalGroup_2 -> Role C, Role D,
internalGroup_3 -> Role E,
and 2 external group :
externalGroup_1 -> Role A,
externalGroup_2 -> Role B,
We add similar user under a group. and then roles are assigned to groups. in above example Role A , Role B is assigned to internalGroup_1.
We can have a single user id in which is attached to interalGroup_1, interalGroup_2, interalGroup_3 , externalGroup_1and interalGroup_2.
When user logon to Internal portal he will see role A, B,C,D and E
and when user logon to internal poral he will see role A,B.
provided A,B,C,D,E roles should exist in internal protal and role A,B exist in External portal. You can use transport roles from external portal to internal portal.

In Apple Configurator, can I set up different sets of iPads with different apps loaded? Or will all iPads synced with Configurator be required to have the same build?

In Apple Configurator, can I set up different sets of iPads with different apps loaded? Or will all iPads synced with Configurator be required to have the same build?

Hi jshira86,
You can definitely have different sets of iPads with different apps loaded. When you "supervise" your iPads, you will see that on the left side of the Configurator window there is a "+" sign in the lower left corner. Click it to create a new device group. With this new device group you can choose what apps and configuration profiles you want to install on that group of iPads. Create as many groups as you want to customize the apps and profiles you want on them.
Hope this answers your question!
~Joe

Can different music be used with different set of photos in a slide show?

Can different music be used with different set of photos in a slide show?

Yes. The basic idea is that you make a playlist of songs and choose that to use with the slideshow, rather than any particular song. In iPhoto 11 you can do this in iPhoto. In earlier versions you do this in iTunes.
There is a limitation. Each song will play the full way through, you can't croassfade from one to another and so on.
Alternatives to iPhoto's slideshow include:
iMovie, on every Mac sold.
Others, in order of price: PhotoPresenter $29
PhotoToMovie $49.95
PulpMotion $129
FotoMagico $29 (Home version) ($149 Pro version, which includes PhotoPresenter)
Final Cut Express $199
It's difficult to compare these apps. They have differences in capability - some are driven off templates. some aren't. Some have a wider variety of transitions. Others will have excellent audio controls. It's worth checking them out to see what meets your needs. However, there is no doubt that Final Cut Express is the most capable app of them all. You get what you pay for.

Is it possible to open 2 Firefox windows with a different set of tabs at start-up?

I would like Firefox to open two separate windows at start-up, each containing a different set of tabs.
Is there a way to do this?

If you close Firefox with these open and start Firefox with the windows from last time yes.
It is also possible to select the active tabs/windows by selecting the Home page to be "Use Current Pages".
*[[How to set the home page]]

Different user options with different sets of questions

Is there a way I can have two different options and when the user clicks on option A a whole set of questions/form fields appear. Or if they select option B a whole different set of questions/form fields appear?
How would I go about programming something like that?
Hopefully I was clear enough. Thanks so much! :)

Hi Arnold,
SAP Logon Tickets issued by the Portal contain two user ids, basically one for Java Systems and one for ABAP systems. See also note 843061 for details.
You do not need passwords for the reference system, if the user mapping is maintained by the user administrator, and the UM property ume.usermapping
.admin.pwdprotection is set to false, see http://help.sap.com/saphelp_nw04/helpdata/en/fe/d22a41b108f523e10000000a155106/frameset.htm. If you set the mapped user id programmatically, or if you retrieve it from an LDAP server, you also do not need to verify the ABAP password of the user (see https://media.sdn.sap.com/javadocs/NW04/SP12/ume/index.html and http://help.sap.com/saphelp_nw04/helpdata/en/0b/d82c4142aef623e10000000a155106/frameset.htm).
Best regards,
Joerg

Duplicated report with different set of conditions

I have just duplicated a report in 10g and apparently I'm not allowed to have different conditions/limitations in the new report. If I change a condition in, say, the new report, it affects the original report and the condition will change according to the changes made.
Is it really true that you can't have different sets of conditions in two otherwise similar reports (one duplicated from the other)?
Thanks in advance!

Had to chime in on one thing here.
I agree with Michael that most companies SHOULD use Disco Plus as their primary Disco tool for developers and maybe have one copy or so of Disco Desktop for a couple of little things (ie: subqueries - which aren't really sub-queries but that's another story), saving to disk, etc.
At many clients and presentations I strongly recommend the ol' 95 / 5 / 1 rule being that you have 95 users using Viewer, 5 users using Plus and maybe 1 with Desktop (and most likely that's the 1 with Admin as well).
However - and it's a big however - is that I've seen many clients that have a problem with the way their situation has been set up (ie: their intranet, their databases, their security, their iAS, etc. - so that Disco Plus runs so much slower than Desktop, that developers end up keeping Desktop and using it!
It's a crummy situation but when using 3 tier architecture, there seems to be a mental block with many companies that you have to up keep that 3rd tier (ie: the Disco Server for Plus / Viewer).
And as for the $1200 bucks - again Michael is quite right. Of course, no company would have many more client / server copies out there that they've 'registered' ... right?
So, unfortunate though it may be, I think keeping the Disco Desktop examples may prove valuable for many developers ... until that day Oracle finally ejects it.
Russ

Writing a different set of finite samples at each iteration

Similar Messages

Maybe you are looking for