Writing to the Message Log panel`

Is there any way to write to the Message Log panel from a transform script?

Try this:
Packages.oracle.dbtools.crest.swingui.ApplicationView.log("your text");
Philip

Similar Messages

  • I've been recieving text messages on my Iphone 4s, but the phone number is not showing up on my bill under the message logs.  Anyone know why??

    I've been receiving text messages on my phone, but for some reason the phone number is not showing up on my bill under the message log.  Does anyone know why?

        donnagman,
    Thanks for the details. All numbers should show up in the message history log, unless you are communicating via iMessage. When texting the numbers that are missing in the message log are you using your normal messaging app on the device or a downloaded app? Have the numbers that are missing been shown in your message log before?
    LindseyT_VZW
    Follow us on Twitter @VZWSupport

  • Can we save the warning message in the message log of Lead.

    Hi,
    I have an requirement where i have to raise an warning message while "creation of lead from campaign" on campaign UI, I can raise that warning message using below code.
    DATA lr_message_service TYPE REF TO cl_bsp_wd_message_service.
    lr_message_service = cl_bsp_wd_message_service=>get_instance( ).
    lr_message_service->add_message( iv_msg_type = if_genil_message_container=>mt_warning
    iv_msg_id = 'ztest'
    iv_msg_number = 006
    iv_msg_level = '1' ).
    but how can i retain this warning message in the lead message log ? "when ever i will open that lead again that warning message should be there"
    thanks & regards
    raman khurana.

    Hi,
    Below are the steps to write to the log and then read it,
    1. Create a Log useing FM BAL_LOG_CREATE. This will return the log handle.
    2. Add messages to log using FM BAL_LOG_MSG_ADD. Importing parameters are log handle and the message.
    3. You can read the log by passing the log handle to FM BAL_GLD_SEARCH_MSG. This will return the message handle.
    4. Now pass the message handle to FM BAL_LOG_MSG_READ. This inturn return the message id and class. Pass the msg. details to FM BAL_DSP_TXT_MSG_READ to read the message text.
    Regards,
    Arun Kumar

  • Preventing missed calls/VMs from registering in the "messages" log

    I'm trying to figure out whether there is a way to get missed calls (and, preferably, notices of voicemail) delivered to a different place on the BB than notices of SMS/email. If I see the little person icon that indicates that there's a voicemail, I don't also need notice of that in the mailbox with the red star on it. Is there a way to make it stop?
    Thanks in advance!

    on your device :
    home screen >> green button >> open menu >> options >> call logs
    there you can choose to log nothing.
    => the phone calls you take, and the ones you miss, appear in the phone log, but no more in the messages list.
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Why are the message logs incomplete in my online account information?

    I went back through my and my husbands text message history looking for a unique number. Mine seems to be complete, but his is FULL of holes. Please tell me he can't somehow hide his text message usage; that just makes me suspicious and sick.

    Apple utilizes a system called iMessage which does not utilize the SMS/MMS system of cell phone providers and therefore will not show up in your texting logs. As long as iMessage is activated on an iPhone, it will use this system to any other iPhone which also has iMessage activated. The only way around this is to deactivate iMessage.
    Messages to other devices, either iPhones without iMessage activated or non-iPhone devices, will show up in your texting logs as these messages will be sent via the SMS/MMS system.
    If you want all of your messages to show up in your messaging logs, you will have to deactivate iMessage in the settings on each of your Apple devices.

  • How do I suppress ARP movement messages from the message logs?

    In FreeBSD, one is able to remove ARP movement notices such as the below:
    arp: 10.10.10.170 moved from 00:30:48:23:8d:5d to 00:30:48:23:8d:5e on en0
    by doing a `sysctl net.link.ether.inet.logarpmovements=0`.
    Apparently I can't do this here, and these messages are flooding my logs. What can I do to suppress these?
    G5 Mac OS X (10.4.5)

    Exactly the same problem as above but "hpzexe"

  • Aperture writing to the console log

    The Console application receives a lot of messages from Aperture, whenever I am doing anything.
    The Console entry usually looks like (95%)
    +1/26/11 5:45:29 PM [0x0-0x495495].com.apple.Aperture[30958] Wed Jan 26 17:45:29 mymachine.local Aperture[30958] <Error>: CGBitmapContextGetBitsPerComponent: invalid context 0x13d5f68b0+
    or I intermittently receive (5%)
    +1/26/11 5:41:49 PM [0x0-0x495495].com.apple.Aperture[30958] This isn't a bitmap context. Forcing destination format to ARGB_8 for CGContext.+
    There can be anywhere from 8 to 20 entries per second. It makes trying to update faces slow to a crawl.
    I have Aperture 3.1.1.
    My Aperture library is on an internal soft RAID, composed of three disks (I left the primary disk as the OS/application disk).
    Any suggestions would be appreciated.
    Message was edited by: GateGuy

    Try System.out.println("\033[32mTest\033[0m"); If it works, google for Ansi control codes.

  • Error message: "Logging into the account failed because an error occurred."

    Hello,
    We had an XServe G5 2.0 DP 5GB/80/2x250 running Mac OS X 10.3.9 Server with all updates as a main server for a school. The server provides Open Directory Master as well as File-Sharing (AFP and SMB) and e-mail services to about 30 teachers and 300 students. The user home directories reside on the server. A web server also runs on the machine. The students use a pool of laptops, which are configured with a local guest and admin account as well as access to the server-based home directories with Directory Access. The server had the OS running on the 80 GB hard drive and all data (Home directories, mail database, website, etc. were on the two mirrored 250 GB drives.) All was working well until...
    A few weeks ago, one of the two 250 GB died. We decided to use the opportunity to upgrade the server and set it up with 3 x 750 GB, two drives running as a mirrored pair to hold OS AND Data, the other as a stand-by unit to help replace a failing drive.
    We migrated the OS and all data from the previous drives without a problem. Since now, all data is residing on one pair of drives, we put the data from the old "Data" drive in a folder on the root level of the new HD pair. We wrote a script that launches at startup which creates the symlink in /Volumes/Data to link to /Data. We thought that with this, all would be well.
    However: When any user tries to log into his account from any iBook (10.3.9 or 10.4.11) (wirelessly), he gets the message:
    "Logging into the account failed because an error occurred. The home folder for the user account is located on an afp or smb server. contact your system administrator for help"
    If the user logs in to the guest account on the iBook, then accesses his home directory via file-sharing, he can see (read/write) all his data. So, the data and privileges seem to be OK, as well as Open Directory working correctly. Mail and the web work well also, as does logging in to a user account from one of the PC's (wired).
    Can anyone make any suggestions as to how to fix the situation? Currently, the users are using the guest accounts and accessing their data via filesharing, as well as using webmail for their e-mail, but this is a major nuisance.
    Any help will be greatly appreciated.
    Best regards,
    Alain Chammas
    A user trying to access his account from a PC (wired) has no problems.

    A good number of folks are having problems with this same error message at login, and nobody seems to have found a fix.
    I believe I have stumbled upon, if not a solution, at least part of the answer. If you're logged into a 10.4 workstation, open a Finder window and click the "Network" icon. The first time you do this, you'll only see "Library" and "Servers" icons, but if you let it sit for a moment, other folders will magically appear. One of these is "My Network" which is the critical part.
    In Workgroup Manager, edit one of your users' home directory configuration. There's a URL piece, usually "afp://server.domain.com/Users" (which is what shows up in the window when you click on the "Home" tab for that user), and then there's a "Home" path that is usually something like "/Network/Servers/servername/Users/username". Trouble is, you've noticed that 10.4 doesn't put servers into the "Servers" path, but rather into the "My Network" path.
    So, if you change that "Home" path to read "/Network/My Network/servername/Users/username", it should work--with one caveat. Apparently 10.4 doesn't create the "My Network" path on a given client until you actually browse the network on that client. If you haven't logged into a 10.4 workstation and browsed the network, the "My Network" path won't be there, and you'll still get the error. Login as a local user, browse the network (so that the "My Network" folder shows up), logout, and then login as an Open Directory user, and it should work.
    I'm betting that 10.3, 10.4, and 10.5 all handle this issue differently, so if you're in a mixed-version situation, you may have to experiment to find a workable fix.
    Derndest thing I ever saw.

  • How can i find the messages in the log

    I want to see the all the error/information messages in the message log (buffer) , how can i view them? is there any table or function module for that?
    I'm trying to delete  error/information  messages before a user can see on the screen in the sales order creation process.
    Hope I'm clear with my question !
    Edited by: aday rao on Oct 30, 2009 6:41 PM

    There are few messages creating confusion the  users regarding a creditcard authorization we want to delete them .
    Here is the scenario ....
    we have a custom program in which
    Creating the order using FM      CALL FUNCTION 'BAPI_SALESDOCU_CREATEWITHDIA'
    once the order is created and saved we display the same saved order for the user with code below ...
    set parameter id 'AUN' field SALESDOCUMENT.
    call transaction 'VA03' and skip first screen.
    But in between the order  save and siaply , creditcards authorization program will kick in the background  if it has some errors , these errors are displayed in my VA03 screen initial screen.  I'm planning to remove them from the log .

  • During login when writing appears on "ö" message - Keybord navigation disabled

    When you log in to my bank username occurs a "ö". At this writing "ö" is the message "Keyboard navigation disabled". In "Window Explorer" there is no such problem!

    hello angela1963, this seems to be a common problem, the bank has some very quirky code on its login page that apparently can't cope with ''Umlaute'' - please contact the support of the bank and ask them to fix it...
    http://thedailywtf.com/Articles/Bank-of-Scotlands-Keyboard-Trap.aspx
    http://www.infogurke.de/2010/07/erfahrungen-mit-bank-of-scotland/

  • CK40N : no message log update after =cksu

    Hi costing experts,
    In the costing run statistics there are errors for the marking step, which I correct by entering =cksu according to SAP note 542790.
    However, the message log for the marking step is not updated. It is hard to find which are the remaining messages in the overall message log, because there are some 400 messages in total and only 50 are still relevant according to the refreshed statistics.
    Does anyone have any idea's about what can be done to update the message log?
    Thanks,
    Caroline.

    I got below error in the ST22 dump....
    "Database error text........: "ORA-00060: deadlock detected while waiting for
    resource"
    Internal call code.........: "[RSQL/INSR//BIC/FZXX_C02 ]"
    I was searching for OSS notes associated with following keywords and note able to find any notes related my support pack level we are in SP13 (SAPKW70013)
    "DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB" "WRITE_ICFACT"
    Any help will be greatly appreciated...
    Thanks,
    Raman

  • Message log not correctly associated with contact

    I'm having an issue where I cannot text message a particular contact or phone number. A series of steps I took seems to have exposed a glitch where the message log will not corrrectly associate itself to a newly created contact.  So now when I push the SMS button on the new contact, nothing happens. Also when I manually start a new text message and add the contact to the text message and press send, the message clears from the text box and nothing else happens.
    Here is how you reproduce the error:
    1. I called a number and quickly hung up, just as you would do to log a number for saving later.
    2. From the call log, I clicked on the SMS button to send a text message.
    3. I sent a text message.
    4. From the text message log, I clicked on the number at the top to save it to contacts.
    5. I saved a new contact with the number.
    6. If you go back to the message log, you should notice that the message log header does not update with the new contact's name. Instead it will still show the number.
    7. Finally, I went to the test contact and pressed the SMS button and nothing happens.
    After you add the contact like I did, it seems that the contact does not correct connect itself with the message log.
    After step 5, go to the message log and click on the message log header which should still be the number. When you do this, you would think it would open up the new test contact info card, but instead it opens up a new contact card, as if the number is not saved to a contact yet. It gives me the option to Add To Contacts at the bottom.

    I have the same issue.  I started not being able to text only one person.  I go to the contact and click on the "SMS" button and it doesn nothing.  If I try to send the message directly to the number it just doesn't do anything, the message leaves the text box, but doens't show up in the conversation window.  I'm not exactly sure what I did to do this, but I think it's because I added the same contact twice.  Once from my incoming calls, and once from my outgoing texts.  I've tried deleting all references to this number (ie the contact info, incoming/outoing calls and texts) but nothing has worked.  It must be the corrupt contact thing as well.

  • Message log is not getting deleted in WEBUI (BADI ORDER_SAVE)

    Hi,
    I am displaying an error message based on certain conditions in BADI: ORDER_SAVE (CHECK_BEFORE_SAVE). On getting error, I am correcting that error.
    Using CRM_MESSAGE_DELETE, I am deleting error message before displaying new error message. However, my error log is not going away. It is still displaying in the log in WEBUI.
    Could you please help me out, how can I delete error message, and error log from WEBUI.
    Thanks,
    Sandeep

    I  have the same question as you .
       I  have use folleing code to display message in web ui:
          if (conditions).
          CV_OWN_MESSAGE = 'X'.
          MESSAGE '商机描述已经存在，请修改后再保存！' type 'E' RAISING DO_NOT_SAVE .
        endif.
    but when i have edit the description , the Message log is not getting deleted in WEBUI .
    who can tell me , thanks for all your help !

  • How to trace the message in which line of program used?

    Dear fellows,
           Many times when we run a t-code (especially standard t-code), it will return many message log. but when we debug the t-code to trace the error message, it is difficult to find why raise this error message. Even we can not find in which line of program. We can not use the where-to-used list in SE91 to trace, because it is not written like this:       message 033(FD) TYPE E.
           For example in validation(GGB0)  we use some message, but when this message come out, we didn't know this message in which program raise.  And it also can not be traced using message at in debug mode.
           In many case, the way of using message is not easy to be trace , but if we can find which line of program to raise this message, would help a lot for finding the cause problem.
           Is there any tool for us to trace message ?
           Thanks for your sincerely answer!

    Hello All,
    If the message log is filled like this
      L_S_MSG-MSGTY     = 'E'.
      L_S_MSG-MSGID     = 'BL'.
      L_S_MSG-MSGNO     = '303'.
      L_S_MSG-MSGV1     = '007'.
    Can you trace this message by putting a watch-point/break point? I guess no! If some has YES as answer, please feel free to correct me.
    That is why whenever filling a message log/return table it is important that we ensure that the message can be traced back using "where-used". Hence the usage of MESSAGE...INTO (or the pre-historic, IF 1 = 2 ... MESSAGE ... ENDIF) construct.
    BR,
    Suhas

  • I'm getting kernel panics each day as I shut down, the message of restarting by holding down the power button appears on the screen - it began about a month ago and. Do you have any ideas of how to solve the problem?

    I'm getting kernel panics each day as I shut down, the message of restarting by holding down the power button appears on the screen - it began about a month ago and. Do you have any ideas of how to solve the problem? I've copied the logs that I found for each kernel panic that still have the message logged. Please help if you can, I have read some of the other comments and perhaps it has something to do with my anti-virus software being on at start up. I have copied the log here. Any advice will be welcome.
    Interval Since Last Panic Report:  665204 sec
    Panics Since Last Report:          8
    Anonymous UUID: D6DCC90D-A5CA-4BBE-A435-3E64A512A51B
    Sat May 26 07:23:05 2012
    panic(cpu 3 caller 0xffffff80002b4f36): trying to interlock destroyed mutex (0xffffff801a489be0)
    Backtrace (CPU 3), Frame : Return Address
    0xffffff8160313b00 : 0xffffff8000220792
    0xffffff8160313b80 : 0xffffff80002b4f36
    0xffffff8160313b90 : 0xffffff8000227e68
    0xffffff8160313bd0 : 0xffffff7f80d14250
    0xffffff8160313c20 : 0xffffff7f80d14f73
    0xffffff8160313cc0 : 0xffffff800059a237
    0xffffff8160313d00 : 0xffffff8000586cbf
    0xffffff8160313d20 : 0xffffff800057e6e3
    0xffffff8160313df0 : 0xffffff800057ed06
    0xffffff8160313e20 : 0xffffff8000583c52
    0xffffff8160313e70 : 0xffffff8000583d05
    0xffffff8160313e90 : 0xffffff80005358b4
    0xffffff8160313ef0 : 0xffffff80005367c3
    0xffffff8160313f30 : 0xffffff8000536897
    0xffffff8160313f60 : 0xffffff80005ccfe8
    0xffffff8160313fb0 : 0xffffff80002da5e9
          Kernel Extensions in backtrace:
    com.intego.iokit.VBX6NKE(1.0)[211D5E46-3E43-C5DC-9C6A-8C3FFF0F4493]@0xffffff7f8 0d11000->0xffffff7f80d1bfff
    dependency: com.apple.iokit.IONetworkingFamily(2.1)[2FCC16E1-34AB-3908-98BD-CCBFA56FFDCE]@0 xffffff7f809b7000
    BSD process name corresponding to current thread: iStatLocalDaemon
    Mac OS version:
    11E53
    Kernel version:
    Darwin Kernel Version 11.4.0: Mon Apr  9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
    Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
    System model name: iMac11,2 (Mac-F2238AC8)
    System uptime in nanoseconds: 69777074610
    last loaded kext at 58265763561: com.intego.iokit.VBX6NKE            1 (addr 0xffffff7f80d11000, size 45056)
    loaded kexts:
    com.intego.iokit.VBX6NKE            1
    com.intego.iokit.BehavioralKext            1
    com.intego.kext.VirusBarrier.AppBarrierKPI            10.6.8
    com.intego.kext.VirusBarrierKPI            10.6.8
    com.globaldelight.driver.BoomDevice            1.1
    com.huawei.driver.HuaweiDataCardACMData            4.2
    Model: iMac11,2, BootROM IM112.0057.B01, 2 processors, Intel Core i3, 3.2 GHz, 12 GB, SMC 1.64f5
    Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A53463531323634485A2D3147344431
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A53463531323634485A2D3147344431
    Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
    Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.64.8-P2P
    Bluetooth: Version 4.0.5f11, 2 service, 18 devices, 1 incoming serial ports
    Serial ATA Device: ST31000528AS, 1 TB
    Serial ATA Device: OPTIARC DVD RW AD-5680H
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfa100000 / 2
    USB Device: USB2.0 Hub, 0x05e3  (Genesys Logic, Inc.), 0x0606, 0xfa140000 / 5
    USB Device: USB2.0 Hub, 0x05e3  (Genesys Logic, Inc.), 0x0606, 0xfa141000 / 9
    USB Device: Apple Optical USB Mouse, apple_vendor_id, 0x0304, 0xfa141100 / 8
    USB Device: CanoScan, 0x04a9  (Canon Inc.), 0x1904, 0xfa141200 / 6
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 7
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: HUAWEI Mobile, 0x12d1  (Huawei Technologies Co., Ltd.), 0x1001, 0xfd130000 / 5
    USB Device: My Passport 070A, 0x1058  (Western Digital Technologies, Inc.), 0x070a, 0xfd140000 / 6
    USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 4
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3

    Immediate suspects are the additions you added to you rsystem that installed kexts (drivers).  From above,
    com.intego.iokit.VBX6NKE            1
    com.intego.iokit.BehavioralKext            1
    com.intego.kext.VirusBarrier.AppBarrierKPI            10.6.8
    com.intego.kext.VirusBarrierKPI            10.6.8
    com.globaldelight.driver.BoomDevice            1.1
    com.huawei.driver.HuaweiDataCardACMData            4.2
    Two experiments you can try.
    1.  Boot in safe mode and see if you can shut down normally.  All thise additions won't be running in safe mode so this test would indicate it is one of them causing the problem.
    2. Uninstall all the intego VirusBarrier stuff.  That's my first guess and the troublemaker.

Maybe you are looking for