Wrong Comany Bank A/c printing in invoice.

Hi,
I am facing a issue related to Invoice Output.
Bank account *1010782* was printed on invoice always when invoice was created for foreign customer.
Bank account 10162 was printed on invoice always when invoice was created for domestic customer.
Now all invoices which are created or only printed from our system (either for foeign or domestic customers) have the same bank account (10162).
I need that pervious status was back. Thatu2019s mean:
Bank account 10782 shold be printed on invoice always when invoice is created for foreign customer.
Bank account 10162 should be printed on invoice always when invoice is created for domestic customer.
Please anybody suggest me the proper solution on this issue. I am eagerly waiting.
Thanks in advance.

Hello,
Debug the print program with the help of your ABAP expert and try to find out from where the system is picking up the Bank account number (for domestic and foreign), one you can locate the same, you may be able to change.
Prase

Similar Messages

Bank details printed on invoice

Hi Friends,
Please can you tell me from where bank details are printed on invoice,
In case of one of my co. ,bank details are not correctly printed on invoice , i checked vendor master ( we are having co.codes created as vendor & customer, for inter & intra co. transactions) , customer master & house bank data , everything correct. not able to understand from where its coming.
Please help.
Thanks & Regards
Bhairavi

Hi,
Correspondence in vendor master is for the Accounting clerks at that vendor level.
The correspondence type I am speaking about is defined at client level and can be assigned to company code. If we dont give any company code here then it will be applicable for all company codes.
Correspondence can be created for different transactions like Vendor payment, Vendor invoice, Down payment etc.,
Check with this link for configuration of correspondence
Correspondence configuration
Regards,
Radhika.

Duplex printing of invoice list in smartform

Hi,
I am new to smartforms and I have to handle duplex printing. I need information like how to give the page sequence for duplex printing.
I have 2 pages, page 1 prints the header list of the invoice. Page 2 prints the invoice list and has the main window, hence if the data in the 2nd page overflows then the invoice list will be printed on the 3rd page. In this scenario I have to get terms & conditions printed behind all the 3 pages.
I created page3 with terms & conditions. This is the way I gave:
PAGE1 - Print mode: D; Next page: Page3
PAGE3 - Print mode: ' '; Next page: Page1
PAGE2 - Print mode: D; Next page: Page3
I have a doubt like if the 3rd page is printed with invoice list then will the 3rd page contain the terms & conditions? Please correct me if I am doing wrong.
Thanks & Regards,
Kate.

Hi
It depends on where you've placed those data, if they are in the bottom of the main, yes you're right: they'll be printed only in the last page.
If they're are in another window, they are printed in every page (where the window is defined).
Max

Duplex Printing SapScript: Invoice - Printer tries but fails backside?

Hi experts!
I have the following problem:
I want to print invoices with duplex mode (using both sides of the paper to save money). I read the forum here and found out several things.
1. Printer Admin (SPAD) -> Set the printer to Duplex mode
Q: Is this general setting needed at all? I just want to print the backsides for invoices
2. SapScript Form Development (SE71) -> Set Duplex Mode for Page First and Next
Q: Do I have to set both to duplex? I have the standard setup so First -> Next -> Next ...
The Problem:
I tried to print out a 4 page long invoice and I observed the Printer doing it. The Printer tries to duplex by holding the page back at the half and pulling it in again. But then it prints "Nothing" on the backside; also it does this for all 4 pages. Result is: I have 4 pages instead of 2 but the printer needs double the time compared with default printing.
Printer ok?
Facing this I tried the text with transaction SO10: SAPSCRIPT-PRINTMODETEST to ensure, the printer can duplex at all.. and it worked perfect. So I can duplex within the text by using the command NEW-PAGE DUPLEX... but that does not help me with my invoice problem at all!. I could use the command in SapScript but the mechanism determing when a page is full would not work anymore. I would not know when a page is full and I dont want to mess with that arround at all.
So where is my mistake?
Do I have to adjust the print-report?
Is it needed to set First as well as Next to duplex?
Do I have to set in SPAD to duplex in addition?
Thanks a ton!
Manfred

Hi Aidan,
The tray problem seems to be like the following:
Page First shall be printed from tray 1 because we have special paper for that with the company logo in color on it. All other pages shall be printed on regular white paper from tray 2 (its cheaper of course).
I checked it out: it is cheaper to print all pages of the invoice on the expensive paper with duplex then using simplex with the two different types of paper... but thats just for the interest
As the page FIRST shall be from tray1 and NEXT should have been from tray2 the printer did not try to print the first NEXT (so the second page) page on the backside of the FIRST page because the paper came from the wrong tray.
The trick with PAGE2 that comes as well from tray1 enabled the printer to print the second page on the backside of page FIRST.
My current problem is the following (and most likely not SAP-solvable):
Its best to explain like the following. Take a normal DINA4 empty sheet of paper and mark it with a cross on the upper right corner. Thats where our log is.
It is in Tray 1 of our printer are the sides with the logo facing down and towards you. If we print in simplex, then the invoice is printed properly on the side with the logo.
If we print Duplex then we would have to insert the paper with the logo facing upwards and away from you to have the first page printed on the side with the logo correctly.
the Problem with that is that I would have to change any form to duplex otherwise all other printmessages are printed wrong. And if someone prints on the "good" paper in simplex mode (for example from MSOffice) then they will print on the wrong side of the doc.
Summary:
I can print Duplex now with the hints you gave me but I have strategic problems. Another problem is that some customers dont want duplex invoices as they scan the invoices automatically and would miss out every second page.
Thanks Mr. Black

Bank Payment Vocuher Printing

hi,
Regarding bank payment voucher print we have customised with the help of abapers. in the voucher print, system is printing exactly the invoice reference and amount of the particular payment.(if it is a full payment or part payment)
But for the final settlement of the bills system is taking the clearing document number for all the bills. Document is showing the amount of final payment. But reference of the bill is not showing correctly, it is showing the bill amount istead of final payment amount. how can rectify and which table is to be used for getting the amount exactly for the final amount.
For taking this detail from BSAD for open item and BSID for clearing items.
govind.

Hi,
If the config the the module you are using doesn't support a certain type of form them you have two options;
- Take a copy of the print program and change it to use the desired type of form
- Create a type of form that is supported and use that to call your form.
Regards,
Nick

AR "Invoice Print Selected Invoices" program

Hi to All,
When we run the "Invoice Print Selected Invoices" program in AR. What table and column is used to store the flag for printing the invoice. When we look at the invoice, the more tab has the Print Option/Print Date. Where is the print date, time stamp stored?

Hi.
Have a look on RA_CUSTOMER_TRX_ALL table and columns PRINTING_LAST_PRINTED, PRINTING_ORIGINAL_DATE, etc.
Octavio

Switch from OINV to ODRF in Crystal Report layout for print the Invoice?

Hi,
I have imported in Sap Business One some standard report developed by Sap with Crystal Report (like Sales Invoice).
I have try to print my Invoices and all is OK, then I have try to print a Draft Invoice and, even in this case, is all ok. Then I have open the Crystal Report designer for this print module, and the entry point is the OINV table. How can he print succesful the Draft Invoice (that is in the ODRF table ObjType = 13)? Formula Field? I don't understand!!
Thank for the help!!
Marco

Hi Marco,
You only need a single Crystal report for this. Base it on a stored procedure which has two INT type parameters @DocKey and @ObjectId. Within your SQL create IF blocks to handle different @ObjectId values:
IF @ObjectId = 13 then use the invoices tables OINV/INV1 etc.
IF @ObjectId = 112 then use the draft tables ODRF/DRF1 etc.
Don't forget to put the @ symbol at the end of the parameter in the report itself. That is all that is needed to create a single report that works for both added invoices and draft invoices. You could extend the SQL to handle other @ObjectId values like 14 for AR Credit Notes and so on.
Regards,
Andrew.

Invoice Print Selected Invoices program is failing when language is not US

Hi All,
I am trying to run "Invoice Print Selected Invoices" for multiple languages.
When language in customer setup under "Account Site Information" is 'US' then EN-US: (Invoice Print Selected Invoices) is completing successfully.
But when I am changing the language from US to some other language let’s say "F”, then "FR-FR: (Invoice Print Selected Invoices)" getting submitted and it is completing in error.
These are the log messages which I am getting:-
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
p_order_by='TRX_NUMBER'
p_customer_id='10044'
p_open_invoice='N'
p_check_for_taxyn='N'
p_choice='SEL'
p_header_pages='1'
p_debug_flag='N'
p_message_level='10'
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
FRENCH_FRANCE.AL32UTF8
Entrer mot de passe :
MSG-00100: DEBUG: AfterPForm_Trigger +
MSG-00100: DEBUG: Multi Org established.
MSG-00100: DEBUG: AfterParam_Procs.Get_Country_Details
MSG-00100: DEBUG: AfterParam_Procs.Switch_On_Debug
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_Low
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_High
MSG-00100: DEBUG: AfterParam_Procs.Get_Tax_Option
MSG-00103: lp_trx_date_clause = and a.trx_date = a.trx_date
MSG-00100: DEBUG: BeforeReport_Trigger.Build_Where_Clause
MSG-00100: DEBUG: P_Choice: SEL
MSG-00100: Oracle Error in call to Before Report Trigger -6502
REP-1419: 'afterpform': Abandon du programme PL/SQL.
Report Builder: Release 10.1.2.3.0 - Production on Ma Avr 2 05:59:27 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Can anyone please tell me what is the problem or is there any mistake in my approach?
Regards
Akash

Please see the following docs.
R12: Invoice Print Errors With REP-0069, REP-57054, REP-1419 [ID 557171.1]
Invoice Print Error: Printing Selected Invoices (Multiple Languages) Is Erroring Out With REP-0069: Internal error [ID 731171.1]
Thanks,
Hussein

URG:11i to R12.1.3: Invoice print Selected Invoices fails with REP-1419

Hi,
Invoice print Selected Invoices fails with the following error: Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
REP-1419: 'beforereport': PL/SQL program aborted.
Checked the setups based on 557171.1, 375693.1,1101855.1.
Still the issue is existing.
May i know the cause of the issue or is it a bug?
Thanks
Nancy

Hi ,
The cause of the issue is the standard rdf is set to run for single operating unit. But R12 is a moac setup enable application. Hence The operating unit mode is changed to Single from null in system administration concurrent program setting for the XML report concurrent program.
This fixed the issue.
Thanks
Nancy

Printing SAP invoice on SAP printer using custom SAP report

Hi SAP Experts,
We have the following requirement.
We need to create a custom report in ABAP to print the Invoice on the printer specifed in the input selection screen.We don't want to use the external commad using GUI.Can annyone please suggest how can we create a spool directly using the invoicve no in sap.
Thanks,
Prathamesh

Hi Prathamesh,
Follow this approach.
Get NAST entry corresponding to invoice number(invoice number = objky).
insert this piece of code :
     gwa_nast-vstat = 1.
     gwa_nast-erdat = sy-datum.
     gwa_nast-eruhr = sy-uzeit.
     gwa_nast-usnam = sy-uname.
     gwa_nast-manue = 'X'.
     gwa_nast-vstat = 0.
     gwa_nast-LDEST = P_printername_from_selection_screen.
     CLEAR gwa_nast-datvr.
     CLEAR gwa_nast-uhrvr.
     CLEAR gwa_nast-cmfpnr.
   MOVE gwa_nast TO nast.
   PERFORM einzelnachricht_dialog IN PROGRAM rsnast00 USING sy-subrc.
   IF sy-subrc NE 0.
     PERFORM objekt_entsperren IN PROGRAM rsnast00.
     IF sy-subrc EQ 9.
       RAISE print_error_dial.
     ELSE.
       RAISE print_error.
     ENDIF.
   ENDIF.
   SET SCREEN 0.
   PERFORM objekt_entsperren IN PROGRAM rsnast00.
   COMMIT WORK AND WAIT.
the above will generate a spool.
Thanks,
Anil

Print Excise invoice in Series grp 111 using J1IP for Billing document 1234

Dear Gurus,
I have an issue in which I create Sales Document>>Delivery Document and after that if I save my Billing Document a message pops up like:
Print Excise invoice in Series grp 111 using J1IP for Billing document 12345
And Excise Invoice gets generated automatically without J1IIN, to which I can view in the display mode in J1IIN.
I wish to Create Excise Invoice by using T Code: J1IIN not automatically.
I have checked all the number ranges and search the forum extensively but couldnu2019t found a possible solution.
Please help me!
Regards,
Ashu

Hi,
Create Excise Invoice Automatically
Instructs the system to automatically create an outgong excise invoice immediately you create a commercial invoice or a pro forma invoice.
The system creates the excise invoice in the background.
Dependencies
If you want to make use of this function, you must also define the default plant, excise group, and series groups in Customizing for Excise Duty, by choosing Business Transactions -> Outgoing Excise Invoices -> Maintain Default Excise Groups and Series Groups
SPRO>Logistics General>Tax on Goods Movement>India>Basic Settings-->Maintain Excise Groups.
Under the Outgoing Excise invoice tab there is a check box (Excise invoice during billing)
Regards,
Saju.S

Print preview invoice issue for a parcular invoice in vf03

Hi,
I am facing an issue with the print preview invoice. I have 2 billing document nos., for billing document 3117101008 when I go to "Billing Document"->"Issue to output"-> and click on "print preview" I get an output, but for the other billing document 3117101007 when I click on "Print preview" nothing happens, it just keeps on loading and everything gets hanged.
Do I need to do any modifications in my custom include "YV0023INV_PRINT_F01" or is there anything linked with the header details table 'IT_HU_HEAD'.
Please advise, appreciate your efforts.
Thanks

Hello Bawneet,
Are you facing this issue only to this billing document ?
Did you check the same for 1008 billing document ? First try to open 1007 and then next open 1008 document, here please check are you facing the same issue like screen keeps on loading issue.
Please check this and come back with your issues.
Thanks & Regards,
Lakshmi S

Xml report to print AR invoices to multiple companies

Hi,
can anyone help me to work on this issue, I need to Develop one XMLP report that prints AR invoices for multiple companies, and multiple invoices for each company.
It will be thankful, if anyone help me to come out of this issue. I need it urgently
Thanks

Hi
Are you working in EBusiness Suite or another ERP app? IF so then there are already invoice reports built out of the box that you can use quite quickly.
If not then you need to find out from your users what they want to see on the invoice, then map that to the columns in tables and then write the query to extract the data.
Tim

How to print the invoice(Billing document) using program RSNAST00

Hi,
I want to print the invoice using the program RSNAST00,
but when i fill in selection screen with the following details,
Output Application : V3
Object Key : Billing Document Number
Output Type : ZPFM
Transmission Medium : 1
But it is throwing an Information Message "0 outputs were processed in total (0 successfully,0 incorrectly)
So please guide me, what are settings i have to do and what abap code i have to write to overcome this error.
Regards,
Shasiraj.C

Hi,
As you told I am using the function module RV_MESSAGE_DIALOG in my program when I directly execute my program its not printing invoice,but when i keep the break point and execute a pop up comes in which i click on the PRINT button that time it is printing the invoice.
But I dont want to click on Print button manually, my code should automatically take care of printing also.
Can guide me in this issue.
Regards,
Shasiraj.C

Problem in Printing Multiple Invoice data

Hi,
My re quirement goes like this...
My SMARTFORM receives 2 internal tables :
1. Header data for all Invoices
2.Item data for all invoices.
Now I need to print each invoice in a new Page.
I have done like this.
First I am reading the header table with Index. After that I am incrementing the Index number.
v_index = v_index + 1.
READ TABLE HEADER index v_index.
So, first time the fist invoice will be processed and Its item data will be printed in the main window.
In the MAIN WINDOW after Item Table, i kept one COMMAND as Go TO NEW PAGE.
So, that its starts processing the page again. and Next invoice will be read.
Its working fine and Printing all the header data and footer data respective to that Invoice.
But, its not displaying that data which is there in MAIN window. Its displaying MAIN window as EMPTY.
I have seen in the debugging, when the NEW PAGE command is triggered, its processing all the secondory windows and PROGRAM LINES under that. But, it is not going into MAIN window Program Lines.
Please let me know, how can I solve My problem.
Thanks,
Sandeep

HI,
You can give a page break after every new header invoice. using a command window just assign the first value of the table to a local variable when it is passing into the loop and whenever the value changes, GOTO newpage.
Check the wiki,
[Pagebreak in smartforms|https://wiki.sdn.sap.com/wiki/display/ABAP/PageBreakin+SMARTFORMS]
Regards
Sarves

Wrong Comany Bank A/c printing in invoice.

Similar Messages

Maybe you are looking for