Wrong Doc Type Selected while Creating P.R

Hi;
I recently had an error in my system, By default document Type for Purchase requisition is "A" in  [ OPTT ], but when ever i assign a material to my activity in Project Builder (Cj20N) it creates a P.R and when i open the P.R it is assigned with Document type "B".
Your response in this issue would be highly appreciable.
Thanx in Advance.

Dear e GURU,
I am MM consultant and I would like to share my experience with you in this regard. If you consult MM for theis issue, they will see the configuration in thier own domain, which probably be correct. However, my suggestion is you look into the possibility of any BADI used recently by either MM of other modules and you might get the clue to the solution.
Hope ot works for you.
Regards
Jibran

Similar Messages

  • Add a custom table for field selection while creating field catalog for LIS

    Hi,
    I have a requirement to add a Custom table to be available for field selection while creating a field catalog for LIS. Its required as there are many custom fields to be used for field catalog creation and adding them in one of the existing tables listed is not a feasible option for us. Please let me knw if its possible..?? If yes how to get it done..??
    Regards,
    Akash Sinha

    hi,
    You need to add your field in the Data Dictionary first. For example, if
    you want the new field in the Order Item field catalog do the following.
    Look at structure MCVBAPUSR (SE11). If you already have a user structure
    appended to this structure then you can add your new field to your existing
    structure. If there is no structure already appended to MCVBAPUSR then you
    must create a new structure with your field in it and then append the new
    structure to this one.
    If you look at structure MCVBAP you will see the data appended to the end
    of it.
    Now you should see it in the field catalog.
    regards,
    balajia

  • Wrong Device Type Selected

    This is a partial fix when a wrong device type is selected in the network map, either by you or Network Magic. The first step here was NOT done by me, but by "mbroadfo". He did an excellent job on figuring this out. There is a quicker and easier way however, once you do mbroadfo's work. This was his post under "Network Map Issuses Solved!:
    09-22-201010:02 AM 
    I have been trying to figure out how to resolve a couple of issue with the Network Map in Cisco Network Magic (I have version 5.5.9195.0). The problem is that the device names and types I established initially don't get updated correctly in the map when my DHCP server assigns a new IP address. Network Magic does not seem to recognize the device by the MAC address and seems to put too much stock in the IP address (which is strange as DHCP is prevalent on most networks).
    In order to re-initialize the network map, perform the following steps on ALL PC's running Network Magic:
    1) Do not de-install Network Magic (it's not necessary unless you want more work)
    2) Run: serveme.exe from "C:\Program Files\Pure Networks\Network Magic\Support\" (or wherever you installed Cisco Magic) - I created a shortcut so I can do this in the future without hunting around
    3) Find the System Tray icon for serveme (it's a green dot surrounded by a white box)
    4) Right click on the serveme icon and select:
    - Stop NmService (the first item)
    - Delete NetworkLib.xml
    5) Repeat on ALL PC's running Network Magic
    Once you have finished on ALL PC's, perform the following on each PC with Network Magic installed:
    1) Right click on the serveme icon in the System Tray and select:
    - Start NmService (the first item)
    - Force First Run (the eleventh item)
    - Exit ServeMe
    2) Double-Click on Network Magic icon on the System Tray
    3) Click the Link to restart the Network Magic Platform
    4) Go through the initial startup steps per the instructions in the User Guide
    5) Repeat on ALL PC's running Network Magic
    Hope this helps!
    Foot
    The one problem that I kept having, was on one laptop in particular. Once I got all other PC’s correct, this one followed in suit. (I guess I should mention briefly, there are always at a minimum, 5 laptops, 2 desktops, 2 network drives, 3 network cameras, 1 network printer and 3 game consoles listed on the network map. More if friends come over.) You can see my dilemma if one of my device types change. One step left out by mbroadfo, if you have multiple computers with Network Magic on them, only have ONE connected to the network with a complete map at a time. If anything changes to the device type, all of the computers will change their device type and you will have to start all over again.
    1. Leave all of your network devices turned on. Follow the steps above to disable Network Magic.
    2. On one computer, follow the steps above to get Network Magic running again. Once you have a full map of all of your correct devices displayed, proceed to step 3.
    3. Go to the following folder: C:\Users\All Users\Pure Networks\Platform
    4. Copy this file: networklib.xml
    5. SAVE THIS FILE somewhere in a folder where you know where it is. You could rename the copy to something like network.xml.temp
    6. Go to the next computer, leaving the first PC running all the time on the network, and start Network Magic. Network Magic's network map should populate with the first PC's map. If anything changes, you can restore the xml file on the first PC. I'll explain this step later. Once the map is populated correctly, do the same thing on copying the "networklib.xml" file on the second PC, disconnect the second PC from the network or shut it down so its map cannot change. DO NOT copy the "networklib.xml" from the any PC to another thinking it is a short cut. Each "networklib.xml" file is specific to that PC. Move to the next PC and perform step 6 again until all PC's running Network Magic are done.
    7. Once all PC's are done, they can all be brought back online and life should be great.
    Now for the easier part. From this point on, if the map ever changes, simply exit Network Magic, open Task Manager and stop the nmsrvc, go to C:\Users\All Users\Pure Networks\Platform and delete "networklib.xml", copy your saved version of that file back to this folder and restart Network Magic. I know that the initial setup takes a while, but it is easier in the end if anything changes. I use the map and shares to access my cameras and network drives and if one of those changes to any type of computer, you cannot change the device type back. The software needs to have the same type of selection for all device types as when the "Network Device" in the drop down's is selected. I have just spent hours trying to get all of my devices set back to normal. I hope this will help some of you from repeated frustration when something changes.

    Since I wrote the previous fix, I have had some other issues which forced me to correct several times, the Network Magic map. This was for the most part, letting other people have access to change the map. I have since put passwords in place to stop that. I have come up with a shorter way to do the fix that I suggested and found a possible flaw in the previous fix. I don’t know why or where this comes from, but on all of the computers that I have, NM has two different names for the process that runs. Two computers can both be 64 bit hardware and 64 bit OS and still have different process names. The following is what I am using now and works fine for me, but from what I am seeing no matter what software package, whether game or tool, each computer is so unique, the same problem may be on computers with two completely different fixes. Anyway, the following steps are what I am using now and works great on my systems. Hope maybe these steps will work on yours:
    1.       Goto each computer and do the following steps in order. Right click on the Network Magic icon in the notification area of the task bar and exit Network Magic. Next, open Task Manager and click on the Processes tab. This is where NM uses two different names that I have seen: nmsrvc.exe or nmctxth.exe . Which ever process is running, end the process. Next, click on the Services tab. Scroll down until you find nmservice. Right click on nmservice and select Stop Service. Wait to make sure the Status column changes from Running to Stopped. It may take a few moments. If it does not stop or a message appears saying that the service cannot be stopped, click on the Services button at the bottom right corner. Scroll down on the Services window until you find Pure Networks Platform Service. Right click on the this and click on Stop. Again, wait until the status column changes from Started to Stopped. I have tried to just stop the service, but all of the steps above have to be done in order for this to work. This service is what communicates between this computer on all others running NM and tells them what is in the map. Leave this window open and proceed to step 2.
    2.       Go to C:\Users\All Users\Pure Networks\Platform folder. Delete the file networklib.xml on all computers.
    3.       Once step two is done, go back to the Services window and right click on Pure Networks Platform Service and click on Start. When the Status column changes back from Stopped to Started, click on your Network Magic icon to restart the program on one computer only. Watch to map to make sure it populates correctly. If not, you can simply delete the networklib.xml file at this point without having to stop the service again. The map should start over again from scratch. (John.h2h, see at the bottom of this for a possible area to look at for your issue.) Once the map is correct, goto the next computer and do step 3 again. If the map is correct, disconnect the second computer from the network and proceed on to the next computer. If it changes, you only have two computers maps affected and it is simpler to correct at this point. Once all computers have correct maps, bring all online and all should be great.
    4.       As I stated in the previous fix, make a copy of the networklib.xml file on at least on computer and use that one as your map base. If the map should go awry, you can replace the file after all of the other computers NM services have been stopped and the networklib.xml file has been deleted.
    This looks more complicated than it is and I hope this helps.
    John.h2h, two things that you may want to look at, I use a Brother laser printer for a network printer. The port address changed for whatever reason on my system. I had to open the printer properties on each computer and change the IP address to the correct one and the printer worked fine. Another place to look, and if this is the problem, Network Magic is only following rules. Do you have any DHCP address reserved in your router. I have assigned blockes of IP’s to the different types of hardware. Example, all desktops are assigned from 192.168.1.100 to 192.168.1.109, laptops are from 110 to 129, cameras, network drives and printer are from 130 to 145, and game consoles are from 146 to 149. I know that Netgear has the ability to set these. If you do have it reserved, either delete this in your router or change it. If you reserve the address with the IP and Mac address that you want, make sure that your computer is set to obtain IP address automatically.
    Good luck, denpag

  • Object type error while creating ECR

    Hi All
    When creating  a Engineering change request ECR (T.code: CC31), after entering the change type, selecting the object type(document & material) when i try to save the ECR, i am getting the following error message "is not a valid object type for a task". The error message didnt show in which object type the error is coming, its simply showing the above mentioned message. Could anybody help me in fixing the problem?.
    Regards
    S.Sivakumar

    Hi,
    To grant that allways the currenct screens and authorizations were
    called please maintain also the value "1" into the "Authorization"
    column. For further informations on this maintainance please see the
    attached note 375452. It's important that you not enter the mentioned
    screen number wihtout the leading "1" as this number is added
    automatically by the system (e.g. object MARA 1201 maintain like MARA
    201). You can do this in customizing under:
    Transaction SPRO
    > Cross-Application-Component
        > Document Management
             > Control Data
                 > Define screen for object links
    If you need the dynpro number or object you will find all standard SAP
    objects and their screen number in function module CV130 (Screens) by
    transaction SE80. Please maintain all necessary SAP objects.
    Best regards,
    Christoph

  • Taxes display wrong in Tax Code while create PO

    hi all
    i m facing the problem while creating PO with 4 line items. out of 3 not having any exise duty in J1ID. the user is giving taxcode for all line items. But it is showing the values of taxes Eduty 16%, Ecess 3% and Vatt 4% for all items in PO not in the PRINT. can any give the solution.

    Hi,
    Go to the Table T007A, where you find the tax codes.
    Input & out put taxes are the tax types.
    In FTXP T.code give the tax code and  click on the
    Input tax codes are used for purchase cycle and out put taxes are for sales cycle. I Hope you have given the sales related tax code. Thats why system is giving the error message.
       In T007 Table give the proper input and get the details.
    Regards,

  • ARQ: What is the authorization object to restrict system selection while creating a request???

    Hi All,
    I am trying to know how I can restrict a requester to select specific system only while creating a request.
    I could find aut. object GRAC_ROLEP in role "XXX_requester". There is field GRAC_SYSID in this object wherein
    I can specify the connector name. Initially, it was having "*" value and then I changed it to specific
    connector. I sychronized the roles/users data and tried to raise a request. However, I still find all the
    connectors defined including LDAP!
    May I know how I can show only "required" connectors while creating a request?
    Regards,
    Faisal

    Dear Faisal,
    use GRAC_SYS and restrict GRAC_SYSID to the systems you want to display.
    Regards,
    Alessandro

  • Select option "Show this View : in Folder of Content type : {Custom Content Type Name}" while creating view using CSOM

    Hi,
    I am trying to create "View" in a Document Library and need to enable following:
    1. Mark as default View
    2. Folders -> Show this view : in Folders of Content Type : {Custom Content Type name}
    I am using following code which sets "in Folders of Content Type : " to "Folder" rather than selecting custom content type despite passing Content Type ID of custom content type.
    code:
    var itemContentTypes = clientContext.LoadQuery(web.AvailableContentTypes.Where(ct => ct.Name == viewContentType));
    clientContext.ExecuteQuery();
    var itemContentType = itemContentTypes.FirstOrDefault();
    view.ContentTypeId = itemContentType.Id;
    view.DefaultViewForContentType = true;
    view.Update();
    clientContext.ExecuteQuery();
    Please highlight what seems to be missing?
    Thanks
    Sonal

    Hi,
    Before you set the content type ID for the view, you need to add the custom content type to the library firstly.
    You can add the content type to library using OOTB feature “Add from existing site content types” in library settings or using Client Object Model.
    Here is a code snippet for your reference:
    var list = context.Web.Lists.GetByTitle(listTitle);
    list.ContentTypesEnabled = true;
    var contentType = context.Site.RootWeb.ContentTypes.GetById("0x0120");
    list.ContentTypes.AddExistingContentType(contentType);
    context.ExecuteQuery();
    More information about add exist content type using Client Object Model:<o:p></o:p>
    http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.client.contenttypecollection.addexistingcontenttype%28v=office.15%29.aspx
    Best regards,
    ZhengyuGuo
    Zhengyu Guo
    TechNet Community Support

  • Error in vendor selection while creating Purchase requistions

    Hi,
    I was using bapi_requestion_create to create purchase requistion with different quotas for different vendors.
    Ex: vendor A   with 60%
          vendor B   with 40%
    If the required quantity is 100 items then it has to split 60 items to vendor A and create seperate Puechase Requistion.
    and for 40items with another Purchase requsition.
    Currently iam able to split the noof purshcase requisiton but it was picking only with one vendor.
    MY Code :
    *******Split PRs with respect to Quota ************************
          data : lv_lines type i,
                 lv_qty type  p DECIMALS 4.
          lv_qty = it_oo-qty.
          DESCRIBE TABLE t_equp LINES lv_lines.
          IF lv_lines GT 1.
            clear : w_equp.
            loop at t_equp into w_equp
                          where qunum = w_equk-qunum.
              refresh : t_req_item.
              clear   : w_eord,
                        t_req_item[],
                        t_req_item.
              READ TABLE t_eord INTO w_eord
              WITH KEY matnr = it_oo_sum_purch-matnr_sap
                       werks = it_oo_sum_purch-plant
                       lifnr = w_equp-lifnr.
              if sy-subrc is initial.
                it_oo_purch-AGREE     = w_eord-EBELN. "To Fill ALV
                it_oo_purch-ITEM      = w_eord-EBELP. "To Fill ALV
                it_oo_purch-FORNEC    = w_equp-LIFNR. "To Fill ALV
                t_req_item-doc_type   = c_zbmr.
                t_req_item-pur_group  = it_oo-ekgrp.
                t_req_item-material   = it_oo_sum_purch-matnr_sap.
                t_req_item-plant      = it_oo_sum_purch-plant.
              t_req_item-AGREEMENT   = w_eord-EBELN.
              t_req_item-AGMT_ITEM   = w_eord-EBELP.
              t_req_item-FIXED_VEND  = w_equp-LIFNR.
              t_req_item-QUOTA_ARR   = w_equk-qunum.
              t_req_item-QUOTARRITM  = w_equp-qupos.
                t_req_item-gr_ind     = c_x.
                t_req_item-ir_ind     = c_x.
              t_req_item-MRP_CONTR   = 'NOV'.
                CONCATENATE it_oo_sum_purch-due_dte+4(4)
                            it_oo_sum_purch-due_dte+2(2)
                            it_oo_sum_purch-due_dte(2)
                            INTO t_req_item-deliv_date.
                t_req_item-QUANTITY   = ( w_equp-QUOTE / 100 ) * lv_QTY.
              endif.
    ********Rounding off values*******************
              data : lv_int(20) type c,
                     lv_dec(20) type c,
                     lv_tot(20) type c.
              clear : lv_int ,
                     lv_dec,
                     lv_tot.
              lv_tot = t_req_item-QUANTITY.
              split lv_tot at '.' into lv_int lv_dec.
              if lv_dec(1) ge '5'.
                lv_int = lv_int + 1.
              endif.
              t_req_item-QUANTITY = lv_int.
              APPEND t_req_item.
              clear : v_number.
      Create purchase requisition by group
              CALL FUNCTION 'BAPI_REQUISITION_CREATE'
                   IMPORTING
                        number            = v_number
                   TABLES
                        requisition_items = t_req_item
                        return            = t_return.
    ERRO
              IF t_return-type CO 'AE'.
                CLEAR: v_msg, v_x.
                CALL FUNCTION 'WRITE_MESSAGE'
                     EXPORTING
                          msgid = sy-msgid
                          msgno = sy-msgno
                          msgty = sy-msgty
                          msgv1 = sy-msgv1
                          msgv2 = sy-msgv2
                          msgv3 = sy-msgv3
                          msgv4 = sy-msgv4
                     IMPORTING
                          messg = v_msg.
                PERFORM zf_grava_log_erro_oo
                              USING it_oo_purch it_oo_sum_purch v_msg v_x.
    SUCESSO - Atualiza Tabela zsytmm_pr_po
              ELSE.
                CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
                     EXPORTING
                          WAIT = c_X.
                CLEAR: v_msg, v_x.
                CONCATENATE text-026  v_number INTO v_msg
                                      SEPARATED BY space.
                it_oo_sum_purch-QTY =    t_req_item-QUANTITY.
                PERFORM zf_grava_log_sucesso_oo
                          USING it_oo_purch it_oo_sum_purch v_msg v_x.
                CLEAR: zsytmm_pr_po.
                vl_item = c_00001.
                zsytmm_pr_po-banfn    = v_number.
                zsytmm_pr_po-bnfpo    = vl_item.
                zsytmm_pr_po-ebeln    = c_false.
                zsytmm_pr_po-ebelp    = c_false.
                zsytmm_pr_po-zshmode  = it_oo_purch-shipm.
                MODIFY  zsytmm_pr_po.
              ENDIF.
            endloop.

    Hi,
    You have to fill DES_VENDOR & FIXED_VEND of structure REQUISITION_ITEMS while calling BAPI.  But while going through your code,
    * t_req_item-FIXED_VEND = w_equp-LIFNR
    is commented, uncomment the same and add line for DES_VENDOR also.
    Regards
    Vinod

  • Wrong VL-367 error while creating delivery from multiple sales orders

    Hi,
    We have a Z program* that runs BAPI_OUTB_DELIVERY_CREATE_SLS with multiple sales order items to create one delivery.
    The program runs as a job. The problem is sometimes Bupi turns "VL367 - an item with no delivery quantity..." error for some of the items. But actually we have no availability problem, after a minute in the next job the delivery is being created for those items.
    We couldnt find the the state that causes this wrong error. Have any ideas, is there any problem with the bapi ?

    Hi,
    You should check if you got other Sales Order that might be have items with quantities confirmed. Quantities confirmed in a sales order will be appear as unrestricted stock, although is reserved, and therefore for example:
    Sales Order A: item 10, quantity 10
    Unrestricted stock: 10
    Sales Order B: item 10 (Same material as Sales Order A), quantity 2
    Creating outbound delivery for Sales Order B will generate the message, because that stock is being taken for the Sales Order A already.
    Hope it helps.

  • Changing doc. type after creating a doc. type.

    Hi Friends,
    We are doing our time ageing from the time of creating the document in DMS. We created a document with particular doc. type wrongly, after two days we found that the DMS creation was done with wrong doc. type. In this how to transfer to new correct doc. Type, if we delete this & create a new we canu2019t get any info that it was created two days back.
    We made Z report for this time ageing report.
    Regards,
    Sai Krishna

    You cannot change the document type after the document has been created. The only way to do this would be with an enhancement and this would create major issues with the integrity of your system

  • Changing std title based on Document type while creating po(me21n)

    Hi experts,
    when we enter me21n,there the std title is Cretae purchase order.Here requirement is whenever i select document type as standard po then in std title it should display "Standard po created". Changing the std title in me21n based on selected document type.for eg:if i selected doc type as "stock transport ord" then in std title bar system should display "Stock transport ord po created".
    Thanks in advance.

    Hi,
    You can define allowed item categories for purchase order and doc type config for po
    SPRO>MM>PUR>PO>DOC TYPE>SELECT DOC TYPE>ALLOWED ITEM CAT
    BR
    Diwakar

  • Accounting doc typelink with billing doc type

    Hi,
    I want to see the configuration settings to be done for the accounting document type whenever a Invoice is posted to accounting.Basically if a standard Invoice F2 is posted to accounting then an accounting doc type RV is created.So I would like to know where is the link between the invoice documnet type and accounting document type maintained in the system?

    Hi
    In T code VOFA  in the configuration of the billing type, i think in the control data tab ,there is a field called document type
    This is the field to get the accounting document type
    If that is left blank system takes RV by default
    If you maintain some other accounting doc type in that field, other than RV ,system will pick what you have assigned
    You can test this too
    The Standard  SAP configuration for F2 and many other billing types  that field is maintained blank
    Hence the system picks up RV accounting type automatically
    It is because of the background program ,which runs while billing doc which tells the system to pick RV accounting type ,if that field is left blank ( coding in SAP standard is maintained like that ,to pick RV if that field is left blank)
    Regards
    Raja

  • Restrict GOS attachments in IW32 for specific doc type

    My requirement is we would like to restrict the Services for object
    attachments for specific doc type in IW32 transaction.
    Can blocking be made on doc type level?
    In this case jpg, bmp, and gif should be allowed, but blocking dwg, doc, xls, pdf etc.
    Didn't find any option in SGOS transaction or SGOSATTR table.
    Any suggestions are welcome..

    PARAMETERS: p_key TYPE swo_typeid OBLIGATORY,
    p_type TYPE swo_objtyp OBLIGATORY,
    p_file TYPE c LENGTH 100 OBLIGATORY,
    p_desc TYPE so_obj_des OBLIGATORY.
    data wa_kan1 type kna1.
    DATA: ls_fol_id TYPE soodk,
    ls_obj_id TYPE soodk,
    ls_obj_data TYPE sood1,
    ls_folmem_k TYPE sofmk,
    ls_note TYPE borident,
    ls_object TYPE borident,
    lv_ep_note TYPE borident-objkey,
    lv_offset TYPE i.
    DATA: it_objhead TYPE STANDARD TABLE OF soli,
    it_content LIKE STANDARD TABLE OF soli,
    wa_content LIKE soli.
    ls_object-objkey = p_key.
    ls_object-objtype = p_type.
    **if objtype = kna1 then 
    HERE I CHEK CUSTOMER NO U PUT YOUR OBJ ID AND USING SELECT QUERY U CAN CHECK DOC.TYPE
    select *from kna1 into wa_kna1
    where kunnr = p_key
    if sy-subrc <> 0.
    exit.
    endif.
    TRY.
    OPEN DATASET p_file FOR INPUT IN BINARY MODE.
    WHILE sy-subrc = 0.
    READ DATASET p_file INTO wa_content.
    APPEND wa_content TO it_content.
    ENDWHILE.
    CLOSE DATASET p_file.
    CATCH cx_sy_file_access_error.
    MESSAGE 'Error reading file' TYPE 'E'.
    ENDTRY.
    CALL FUNCTION 'SO_CONVERT_CONTENTS_BIN'
    EXPORTING
    it_contents_bin = it_content[]
    IMPORTING
    et_contents_bin = it_content[].
    Edited by: kk.adhvaryu on Mar 9, 2010 10:54 AM

  • List with multiple custom content types - Show content type selection option in the list newform page

    In my project I am using SharePoint Online 2013 and there is a custom list with two content types. While creating a new item in that list, can we show the content type drop down list along with other columns? While editing an item I am able to view the content
    type dropdown in the edit form associated with the list. Can we enable the same for the default newform as well?

    In my project I am using SharePoint Online 2013 and there is a custom list with two content types. While creating a new item in that list, can we show the content type drop down list along with other columns? While editing an item I am able to view the content
    type dropdown in the edit form associated with the list. Can we enable the same for the default newform as well?

  • Integration of ECC Scheduling Agreement (Doc Type LP) with SAP TM

    Hello Experts,
    I am trying to integrate ECC Scheduling Agreement (Doc Type LP) to create OTR in TM System. I have maintained below settings:
    1. Create and Activate Control Key
    2. Output determination procedure linked to LP has output type TRS0 with requirement 27 assigned.
    3. Output condition record has been created
    4. I have checked Business Functions are also active
    I was able to transfer other Document Types like OR; RE; FD (ECC Free of Charge); SDF (ECC Subsequent Delivery - Free of Charge); Consignment Fill up and Consignment Pick up by maintaining these settings, but not able to push Scheduling Agreement LP to TM.
    The output TRS0 is not appearing automatically and if I try to insert and execute this output in Scheduling agreement, Output is failing with error message: "Order is not TM-relevant"
    Is there any other config or mapping or SAP Note that needs to be applied to achieve this integration? Because I believe standard integration is available for ECC Scheduling agreement (I have read in help.sap.com).
    Thanks and Regards,
    Vikram Bhardwaj

    Hello Vikram,
    You mean this documentation:http://help.sap.com/saphelp_tm81/helpdata/en/9c/787f3c0a771e57e10000000a114084/content.htm?frameset=/en/44/b0488e9c35612be10000000a155369/frameset.htm ?
    I think there is talking about the integration for SCM Basis as SOS, not Order Integration.
    Regards, Marcelo Lauria

Maybe you are looking for