Wrong oper and type

I am using Acrobat Professional 7.0 and utilizing the LiveCycle Designer 7.0. In building a web page, I need to convert word forms to pdf and make them interactive. After converting the document and then adding the fill-in boxes for the users, I receive the "wrong oper and type" message when reopening the file.
I have completed the uninstall and repair wizard, deleted all other versions of Adobe reader from my PC.
Does anyone have any suggestions as to how I can solve this issue?
Many thanks,
AJ

Thanks for responding. I figured out that another version of Adobe was conflicting with this version.
However, I have a new problem now. I am creating fill-in forms. The easiest way is to use Version 7.0 Professional to create the Text, check and numerical boxes. However, my users need to be able to save their filled-in form locally for forms they submit each month. After I get everything set and then convert to Adobe Designer, the form fields are missing and I have to start from scratch. Adobe Designer is not very user friendly when it comes to adding form fields of any type. Plus it doesn't bring the form in very "pretty".
Can you help? Thanks so much!

Similar Messages

  • My nephew lend me his iPad and I have wi-fi service @ home, I get the wi-fi icon on top, it's activated but when I open Safari to go online it ask me for the password which I have and type in. It tells me I have typed incorrect pw. What's wrong?

    my nephew lend me his iPad and I have wi-fi service @ home, I get the wi-fi icon on top of iPad, it's activated but when I open Safari to go online it ask me for the password which I have and type in. It tells me I have typed incorrect pw. What's wrong? I even called my internet server and they cant help! They're saying my nephew must have a block. I asked my nephew and he said "what r they talking about, I have no block"  Can anyone help ME PLZ.

    When you go to Settings > WiFi and see your network name does it have a padlock icon to the right of the network name? If so it is a secured network with a password.
    How did you connect to your network from the iPad? From Settings > Wifi? Was a network password requested? Was it accepted?
    If you touch the ">" to the right of your network name what do you see for IP Address, Subnet Mask, Router, and DNS?

  • System.InvalidCastException: Operator ' =' is not defined for type 'Byte()' and type 'Integer'.

    I'm getting the following error
    System.InvalidCastException: Operator '>=' is not defined for type 'Byte()' and type 'Integer'.
       at Microsoft.VisualBasic.CompilerServices.Operators.InvokeObjectUserDefinedOperator(UserDefinedOperator Op, Object[] Arguments)
       at Microsoft.VisualBasic.CompilerServices.Operators.InvokeUserDefinedOperator(UserDefinedOperator Op, Object[] Arguments)
       at Microsoft.VisualBasic.CompilerServices.Operators.CompareObjectGreaterEqual(Object Left, Object Right, Boolean TextCompare)
       at Customer_Fee_Calculator.Form1.GetCost2(Object dimension) in C:\Users\Chris\Documents\Visual Studio 2013\Projects\Customer Fee Calculator\Customer Fee Calculator\Form1.vb:line 259
       at Customer_Fee_Calculator.Form1.CustomerSelect_SelectedIndexChanged(Object sender, EventArgs e) in C:\Users\Chris\Documents\Visual Studio 2013\Projects\Customer Fee Calculator\Customer Fee Calculator\Form1.vb:line 72
                Dim inotes = rs1("INOTES").Value
      (Line 72)          If inotes.Length > 1 Then
                    cost = GetCost2(rs1("INOTES").Value)(0)
                    desc = GetCost2(rs1("INOTES").Value)(1)
                Else
                    PkgType = CInt(rs1("PKGTYPE").Value)
                    cost = GetCost(PkgType)(0)
                    desc = GetCost(PkgType)(1)
                End If
     Function GetCost2(dimension)
            Dim tempSql1, rs1
            Dim MyResult As New ArrayList
            Select Case dimension
    (line 259)            Case 1 To 24
                    tempSql1 = "SELECT * FROM PRODUCT WHERE PRODUCTID = 13"
                Case 25 To 43
                    tempSql1 = "SELECT * FROM PRODUCT WHERE PRODUCTID = 14"
                Case 44 To 71
                    tempSql1 = "SELECT * FROM PRODUCT WHERE PRODUCTID = 16"
                Case 72 To 120
                    tempSql1 = "SELECT * FROM PRODUCT WHERE PRODUCTID = 17"
                Case 121 To 499
                    tempSql1 = "SELECT * FROM PRODUCT WHERE PRODUCTID = 18"
                Case 500
                    tempSql1 = "SELECT * FROM PRODUCT WHERE PRODUCTID = 19"
                Case Else
                    tempSql1 = "SELECT * FROM PRODUCT WHERE PRODUCTID = 14"
            End Select
            rs1 = dbconnect(tempSql1, 1)
            MyResult.Add(rs1("RETAIL1").Value)
            MyResult.Add(rs1("DESCRIPTION").Value)
            MyResult.Add(rs1("PRODUCTID").Value)
            rs1 = Nothing
            tempSql1 = Nothing
            Return MyResult
        End Function

    Chris,
    I'm not a database guy - so in many ways, I'm not really qualified to answer this, but I'll make a suggestion anyway:
    At the very top of your code, put the following:
    Option Strict On
    Option Explicit On
    Option Infer Off
    With strict on and infer off, it will force you declare types - which I see missing in many places in the code.
    It's entirely possible that by you then going through and fixing those issues, you'll have corrected the problem.
    I don't know that, but it's possible -- and it should be done this way anyway, so there's certainly no harm to be done; in fact you'll actually speed up the program to a small degree because objects don't have to be inferred for the type that they actually
    are.
    ***** EDIT *****
    Also this: DON'T declare any of the types simply as "Object"; that's just trading off late binding for boxing, so you haven't really done much good. Declare them each as their correct actual type.
    Still lost in code, just at a little higher level.

  • Extract WSDL operations and their parameters types

    Hello,
    I am working in a project and I need to extract information about the operations and their parameters types from a WSDL file
    could you please give me some code example on how to do that
    Thanks,
    labi

    By looking into WSDL4J I could not find how to handle the xml schema elements
    do you have any idea how can I get the complex data types information
    Thanks,
    labi

  • Swf link not working in Firefox, Opera and Internet Explorer but works in Safari

    Hi,
    I'm sorry but Im a real newbie and really need help!!!
    On the homepage of my website I have put a swf file that I linked to another page in my website through the div a href link and it displays great on safari and links, however in other browsers, when i try to click on it, it comes up with the link at the bottom of the browser (where it sometimes says Done), however it doesnt actually link, it jsut stays on the homepage.
    Here is the coding i put in:
    <div id="products2">
              <p>
              <a href="Our_brands/index.html">
                <script type="text/javascript">
    AC_FL_RunContent( 'codebase','http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0','wid th','449','height','449','title','Products','src','Productions/boxes3','quality','high','p luginspage','http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=Shockwav eFlash','movie','Productions/boxes3' ); //end AC code
              </script>
                <noscript>
                <object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0" width="449" height="449" title="Products">
                  <param name="movie" value="Our_brands/boxesnew.swf" />
                  <param name="quality" value="high" /><param name="SCALE" value="noborder" />
                  <param name="allowScriptAccess" value="always"/>
                  <embed src="Our_brands/boxesnew.swf" width="449" height="449" quality="high" pluginspage="http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash" type="application/x-shockwave-flash" allowScriptAccess="always" scale="noborder"></embed>
                  <br />
                  <br />
                </object>
                </noscript>
              </a>
              </p>
            </div>
    Could someone please tell me where I am going wrong?
    I would REALLY appreciate it.
    Thank you in advance!!

    I'm doing it for a client and they dont want it put up on the server yet, I wish I could put it up bc I have no idea what I'm doing!
    Basically I wanted a swf file from Flash to display a range of products (I have turned all the products into buttons) and then I put coding into all the buttons to on release getURL which work in the swf file, however when I put the swf file into dreamweaver, the buttons worked in hover state, but the action scripting didn't work to link the swf file to another page in the website (the index in Our_brands folder).
    So i decided to make it link to the index.html in Our_brands folder from wrapping the swf box in a div tag and linking the div tag <a href="Our_brands/index.html"> which links it great in Safari but wont link in Firefox, Opera and Internet Explorer.
    Does that make any sense?
    Sorry if it doesn't.
    Thanks for the quick reply as well!!!

  • My web site has a link which automatically configures an email. Doesn't work in Firefox 5.0 but OK in IE 8, Opera and Netscape. v

    My web site is generated by Second Site , author John Cardinal, and contains email links which when selected automatically createsan email which all you need to do is fill in the body and send it. This has worked in the past in Firefox and does work now using IE 8, Opera, and Netscape browsers but does not work when using my Firefox browser neither locally on my computer or in my Internet website. Firefox is my browser of choice. This has worked in the past using Firefox.
    My web site is www.schulteis.com/omnibus/. On the presentation page, on the bottom, where it identifies Genealogist: Site Administrator. Select it and it may work for you. John Cardinal tested it on his local machine and it worked for him. His response to me was,
    "It's very likely that this is some sort of browser configuration error, and it's probably related to using a web-based email client, In
    Firefox, look under Options > Applications and see how the "Mailto" Content type is configured. It should probably say "Use Yahoo Mail" [it does]. I have never configured a browser to use a web-base email client, so I can't help more than that.
    Since this works fine on my computer and on my Internet site when using browsers IE 8, Opera, and Netscape but not Firefox, and I didn't do anything special for any browser to cause it to work, don't know what I could have done wrong for Firefox.
    I am using Yahoo mail.
    Thanks for your help
    Donald
    [email protected]

    I'm also running FF 36.0.4 on a Win 7 machine.  Here is what I see when I "open" the map (from the server - not inside DW):
    The map area stays white with no image even after several minutes.  The cursor does change to a hand when over the area where the map should be and if I click and drag there the cursor switches to the closed hand - so it's acting like the map is there and can be moved - but just no map shows up.
    I'll run it though the validator.  Thanks!

  • PLS-00306: wrong number or types of arguments in call to 'FND_REQUEST$SUBMI

    I am trying to submit the payables open interface import program using BPEL process. BUT I am unable to submit the concurrent program. The invoke function is failing with below message.
    [2010/08/25 17:06:22] Faulted while invoking operation "OFAPOPIIMPORT" on provider "OFAPOPIIMPORT".less
    -<messages>
    -<input>
    -<Invoke_1_OFAPOPIIMPORT_InputVariable>
    -<part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="InputParameters">
    -<InputParameters xmlns:db="http://xmlns.oracle.com/pcbpel/adapter/db/APPS/XX_BPEL_FND_REQUEST_SUBMIT_REQ/FND_REQUEST-24SUBMIT_REQUEST/" xmlns="http://xmlns.oracle.com/pcbpel/adapter/db/APPS/XX_BPEL_FND_REQUEST_SUBMIT_REQ/FND_REQUEST-24SUBMIT_REQUEST/">
    <db:APPLICATION>200</db:APPLICATION>
    <db:PROGRAM>APXIIMPT</db:PROGRAM>
    <db:DESCRIPTION>Test</db:DESCRIPTION>
    <db:START_TIME/><db:SUB_REQUEST/>
    <db:OperatingUnit>NYSIF</db:OperatingUnit>
    <db:Source>DBL</db:Source>
    <db:Group/>
    <db:BatchName>TESTRAMBPEL1</db:BatchName>
    <db:HoldName/>
    <db:HoldReason/>
    <db:GLDate/>
    <db:Purge>N</db:Purge>
    <db:TraceSwitch>N</db:TraceSwitch>
    <db:DebugSwitch>N</db:DebugSwitch>
    <db:SummarizeReport>N</db:SummarizeReport>
    <db:CommitBatchSize>1000</db:CommitBatchSize>
    <db:UserID>4842</db:UserID>
    <db:LoginID>1683090</db:LoginID>
    </InputParameters>
    </part>
    </Invoke_1_OFAPOPIIMPORT_InputVariable>
    </input>
    -<fault>
    -<remoteFault xmlns="http://schemas.oracle.com/bpel/extension">
    -<part name="code">
    <code>6550
    </code>
    </part>
    -<part name="summary">
    <summary>
    file:/C:/product/10.1.3.1/OraBPEL_1/bpel/domains/default/tmp/.bpel_APOPIIMPORT_1.0_91d4c6c1050ed25d005bc0d396a9db24.tmp/OFAPOPIIMPORT.wsdl [ OFAPOPIIMPORT_ptt::OFAPOPIIMPORT(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'OFAPOPIIMPORT' failed due to: Error while trying to prepare and execute an API.
    An error occurred while preparing and executing the APPS.XX_BPEL_FND_REQUEST_SUBMIT_REQ.FND_REQUEST$SUBMIT_REQUEST API. Cause: java.sql.SQLException: ORA-06550: line 1, column 13:
    PLS-00306: wrong number or types of arguments in call to 'FND_REQUEST$SUBMIT_REQUEST'
    ORA-06550: line 1, column 7:
    PL/SQL: Statement ignored
    [Caused by: ORA-06550: line 1, column 13:
    PLS-00306: wrong number or types of arguments in call to 'FND_REQUEST$SUBMIT_REQUEST'
    ORA-06550: line 1, column 7:
    PL/SQL: Statement ignored
    ; nested exception is:
         ORABPEL-11811
    Error while trying to prepare and execute an API.
    An error occurred while preparing and executing the APPS.XX_BPEL_FND_REQUEST_SUBMIT_REQ.FND_REQUEST$SUBMIT_REQUEST API. Cause: java.sql.SQLException: ORA-06550: line 1, column 13:
    PLS-00306: wrong number or types of arguments in call to 'FND_REQUEST$SUBMIT_REQUEST'
    ORA-06550: line 1, column 7:
    PL/SQL: Statement ignored
    [Caused by: ORA-06550: line 1, column 13:
    PLS-00306: wrong number or types of arguments in call to 'FND_REQUEST$SUBMIT_REQUEST'
    ORA-06550: line 1, column 7:
    PL/SQL: Statement ignored
    Check to ensure that the API is defined in the database and that the parameters match the signature of the API. Contact oracle support if error is not fixable.
    </summary>
    </part>
    -<part name="detail">
    <detail>
    Internal Exception: java.sql.SQLException: ORA-06550: line 1, column 13:
    PLS-00306: wrong number or types of arguments in call to 'FND_REQUEST$SUBMIT_REQUEST'
    ORA-06550: line 1, column 7:
    PL/SQL: Statement ignored
    Error Code: 6550
    </detail>
    </part>
    </remoteFault>
    </fault>
    </messages>
    [2010/08/25 17:06:22] "{http://schemas.oracle.com/bpel/extension}remoteFault" has been thrown. More...
    -<remoteFault xmlns="http://schemas.oracle.com/bpel/extension">
    -<part name="code">
    <code>6550
    </code>
    </part>
    -<part name="summary">
    <summary>
    file:/C:/product/10.1.3.1/OraBPEL_1/bpel/domains/default/tmp/.bpel_APOPIIMPORT_1.0_91d4c6c1050ed25d005bc0d396a9db24.tmp/OFAPOPIIMPORT.wsdl [ OFAPOPIIMPORT_ptt::OFAPOPIIMPORT(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'OFAPOPIIMPORT' failed due to: Error while trying to prepare and execute an API.
    An error occurred while preparing and executing the APPS.XX_BPEL_FND_REQUEST_SUBMIT_REQ.FND_REQUEST$SUBMIT_REQUEST API. Cause: java.sql.SQLException: ORA-06550: line 1, column 13:
    PLS-00306: wrong number or types of arguments in call to 'FND_REQUEST$SUBMIT_REQUEST'
    ORA-06550: line 1, column 7:
    PL/SQL: Statement ignored
    [Caused by: ORA-06550: line 1, column 13:
    PLS-00306: wrong number or types of arguments in call to 'FND_REQUEST$SUBMIT_REQUEST'
    ORA-06550: line 1, column 7:
    PL/SQL: Statement ignored
    ; nested exception is:
         ORABPEL-11811
    Error while trying to prepare and execute an API.
    An error occurred while preparing and executing the APPS.XX_BPEL_FND_REQUEST_SUBMIT_REQ.FND_REQUEST$SUBMIT_REQUEST API. Cause: java.sql.SQLException: ORA-06550: line 1, column 13:
    PLS-00306: wrong number or types of arguments in call to 'FND_REQUEST$SUBMIT_REQUEST'
    ORA-06550: line 1, column 7:
    PL/SQL: Statement ignored
    [Caused by: ORA-06550: line 1, column 13:
    PLS-00306: wrong number or types of arguments in call to 'FND_REQUEST$SUBMIT_REQUEST'
    ORA-06550: line 1, column 7:
    PL/SQL: Statement ignored
    Check to ensure that the API is defined in the database and that the parameters match the signature of the API. Contact oracle support if error is not fixable.
    </summary>
    </part>
    -<part name="detail">
    <detail>
    Internal Exception: java.sql.SQLException: ORA-06550: line 1, column 13:
    PLS-00306: wrong number or types of arguments in call to 'FND_REQUEST$SUBMIT_REQUEST'
    ORA-06550: line 1, column 7:
    PL/SQL: Statement ignored
    Error Code: 6550
    </detail>
    </part>
    </remoteFault>
    I thought I am providing the values for the required parameters. But still I am unable to submit. Could some one help me on fixing this issue?
    Thanks,

    That's probably your problem.
    Look at http://download-west.oracle.com/docs/cd/B31017_01/integrate.1013/b28351/T430238T430241.htm
    Search for "One-time Workaround for Concurrent Programs" in that document.

  • Wrong number or types of arguments in call to 'P_RETRIEVE_OPPTY_ORDER_STATU

    I have been strucK at a point in invoking the procedure which has a boolean parameter which when called from java program get error saying that "wrong number or types of arguments in call to 'P_RETRIEVE_OPPTY_ORDER_STATUS'". the procedure is given below along with the calling java code , and the Errors.
    If i change the parameter data type to VARCHAR2 (the parameter hilighted in red) in the in the procedure and invoke it with the same method it works fine, even if i change the "callableStatement.setBoolean(1, true); to callableStatement.setInt(1, 1); it works fine.When i call it with setting the boolean to the procedure from my java i get a error. Im really confused whether is this a issue with oracle? or with java code.
    Please can any body suggest me any kind of solution! to over come this scenario.
    ///// java code
    public void testThePackage() throws ClassNotFoundException { Connection connection = null; connection = (Connection) getConnection(); CallableStatement callableStatement = null; try { callableStatement = connection .prepareCall("{call L_test.p_retrieve_oppty_order_status(?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}"); callableStatement.setBoolean(1, true); // callableStatement.setString(1, "YES"); // callableStatement.setInt(1, 1); // callableStatement.setLong(1, 1L); callableStatement.setString(2, "SFA"); callableStatement.setString(3, "123421"); callableStatement.setLong(4, 1L); callableStatement.setLong(5, 123L); callableStatement.setLong(6, 345L); callableStatement.setInt(7, 10); callableStatement.setInt(8, 2435); callableStatement.setInt(9, 5675); callableStatement.registerOutParameter(10, Types.NUMERIC); // on_return_status callableStatement.registerOutParameter(11, Types.VARCHAR); // os_duns_no callableStatement.registerOutParameter(12, Types.VARCHAR); // os_hq_duns_no callableStatement.registerOutParameter(13, Types.NUMERIC); // on_approval_id callableStatement.registerOutParameter(14, Types.NUMERIC); // on_approval_amt callableStatement.registerOutParameter(15, Types.VARCHAR); // os_message callableStatement.registerOutParameter(16, Types.VARCHAR); // os_approval_cd callableStatement.registerOutParameter(17, Types.VARCHAR); // os_security_term_cd callableStatement.registerOutParameter(18, Types.VARCHAR); // action // code callableStatement.registerOutParameter(19, Types.VARCHAR); // action // message // txt callableStatement.execute(); connection.commit(); } catch (SQLException e) { System.out.println(e.getMessage()); } } [/code] /////procedure  CREATE OR REPLACE PACKAGE BODY cust.L_test IS  PROCEDURE p_retrieve_oppty_order_status          (isNonAttilaAttempt boolean          , is_system_cd VARCHAR2          , is_order_id VARCHAR2          , in_oppty_id NUMBER          , in_company_id VARCHAR2          , in_acct_id NUMBER          ,in_local_rev NUMBER          ,in_switched_rev NUMBER          ,in_dedicated_rev NUMBER          , on_return_status  OUT NUMBER          , os_duns_no OUT VARCHAR2          , os_hq_duns_no OUT VARCHAR2          , on_approval_id OUT NUMBER          , on_credit_balance OUT NUMBER            , os_message OUT VARCHAR2      , os_approval_cd OUT VARCHAR2      , os_security_term_cd OUT VARCHAR2      ,os_action_cd  OUT VARCHAR2      ,os_action_txt_msg OUT VARCHAR2) IS      io_return l_cdt_util.return_data_t;            action_cd VARCHAR2(20):= NULL;      flag boolean:=false;  BEGIN  if isNonAttilaAttempt =[color=red]true[/color]  then --'YES'  true  flag:=true;  end if;  insert into example (id,data,deleted) values(1,'Test','YES');        END p_retrieve_oppty_order_status;    END cust.L_test;      CREATE OR REPLACE PACKAGE BODY cust.L_test IS PROCEDURE p_retrieve_oppty_order_status         (isNonAttilaAttempt boolean         , is_system_cd VARCHAR2         , is_order_id VARCHAR2         , in_oppty_id NUMBER         , in_company_id VARCHAR2         , in_acct_id NUMBER         ,in_local_rev NUMBER         ,in_switched_rev NUMBER         ,in_dedicated_rev NUMBER         , on_return_status  OUT NUMBER         , os_duns_no OUT VARCHAR2         , os_hq_duns_no OUT VARCHAR2         , on_approval_id OUT NUMBER         , on_credit_balance OUT NUMBER         , os_message OUT VARCHAR2     , os_approval_cd OUT VARCHAR2     , os_security_term_cd OUT VARCHAR2     ,os_action_cd  OUT VARCHAR2     ,os_action_txt_msg OUT VARCHAR2) IS     io_return l_cdt_util.return_data_t;        action_cd VARCHAR2(20):= NULL;     flag boolean:=false; BEGIN if isNonAttilaAttempt =[color=red]true[/color]  then --'YES'  true flag:=true; end if; insert into example (id,data,deleted) values(1,'Test','YES');       END p_retrieve_oppty_order_status; END cust.L_test;    /////error ORA-06550: line 1, column 7:  wrong number or types of arguments in call to 'P_RETRIEVE_OPPTY_ORDER_STATUS'  line 1, column 7:  PL/SQL: Statement ignored                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    Hi YoungWinston,
    I realy appriciate your comments on the standard of the code , i also accept procedure and code may not be readable,
    but the problem is not because of bloated call its just beacause of the Boolean parameter being passed throught the java code, and where as the SQL/PL does not allow BOOLEAN as paramater, please refer the below link for justification.
    what am expecting is , is there any solution to this problem (not a work arround solution).
    Please provide me with some sort of solution/hints or suggestions in achieving this solution,
    I would realy your effort
    Thanks
    ud
    http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28370/datatypes.htm#CJACJGBG
    Predefined PL/SQL BOOLEAN Data Type
    The BOOLEAN data type stores logical values, which you can use in logical operations. The logical values are the Boolean values TRUE and FALSE and the value NULL.
    The syntax for specifying an BOOLEAN data item is:
    BOOLEAN
    SQL has no data type equivalent to BOOLEAN; therefore you cannot use BOOLEAN variables or parameters in the following:
    SQL statements
    Built-in SQL functions (such as TO_CHAR)
    PL/SQL functions invoked from SQL statements
    You cannot insert the value TRUE or FALSE into a database column. You cannot retrieve the value of a database column into a BOOLEAN variable.
    To represent BOOLEAN values in output, use IF-THEN or CASE constructs to translate BOOLEAN values into another type (for example, 0 or 1, 'Y' or 'N', 'true' or 'false').

  • Avoid procedure or function calls between a SQL operation and an implicit cursor test

    when i analyse this code with code expert

    atpidgeon wrote:
    when i analyse this code with code expert
                            UPDATE P_PM_CONTROL_COUNT
                            SET AVAIL_SEG = AVAIL_SEG -1,
                                ALLOCATION = ALLOCATION -1
                            WHERE PM_UNIT_TYPE_ID = vrectab(1)
                            AND USAGE_DATE = vrectab(2)
                            AND SEGMENT_CODE = vrectab(5)
                            AND ALLOCATION - UNITS_RESERVED > 0;
                            IF sql%rowcount = 0 then --Added block and exception to prevent invetory going negative when placing multi units in same unit type out of service.
                                vErrMsg := 'Could not process your out of service request because your selection for unit '|| vrectab(3) || ' at ' || pvPropertyId || ' for ' || vrectab(2) || ' would cause segment ' || vrectab(5) || ' to be over allocated.';
                                RAISE SegOverAllocated;
                            END IF;
    i get "Avoid procedure or function calls between a SQL operation and an implicit cursor test.",as far has i know
    iff you're doing a sql%rowcount    after an update.. trying to see how many rows were updated...  you dont want procedure or function calls between the update and the sql% line
    correct me if im wrong and how would i fix it?or maybe i shouldnt
    You correct it by NOT executing function calls as part of the UPDATE statement.
    1. Issue the function calls BEFORE the update statement
    2. save the function results into variables
    3. use those variables in the UPDATE statement.
    v_rectab1 := vrectab(1);
    v_rectab2 := vrectab(21);
    v_rectab5 := vrectab(5);
    UPDATE P_PM_CONTROL_COUNT 
                            SET AVAIL_SEG = AVAIL_SEG -1,
                                ALLOCATION = ALLOCATION -1
                            WHERE PM_UNIT_TYPE_ID = v_rectab1
                            AND USAGE_DATE = v_rectab2
                            AND SEGMENT_CODE = v_rectab5
                            AND ALLOCATION - UNITS_RESERVED > 0;

  • PLS-00306: wrong number or types of arguments in call to 'MULTISET_INTERSE

    CREATE OR REPLACE PACKAGE pkg_mkt_hub_load_collection
    AS
    PROCEDURE sp_final_load_mkt_hub;
    END pkg_mkt_hub_load_collection;
    CREATE OR REPLACE PACKAGE BODY pkg_mkt_hub_load_collection
    AS
    c_default_limit CONSTANT PLS_INTEGER:=5000;
    PROCEDURE sp_final_lvl_idx_mon_hub;
    PROCEDURE sp_final_lvl_idx_mon_hub
    AS
    CURSOR cur_lvl_idx_mon IS
    SELECT idxmap.ssia_index_code,idxstg.start_date,idxstg.currency,idxstg.level1,idxstg.type,
    idxstg.return_month,idxstg.return_3months, idxstg.return_6months, idxstg.return_ytd, idxstg.return_1year,
    idxstg.return_3years, idxstg.return_5years,idxstg.return_10years,idxstg.market_cap,
    idxstg.mkt_file_id     
         FROM mkt_total_lvl_indx_mon_stg idxstg,
              md_vendor_index_map idxmap
         WHERE idxmap.source = idxstg.source
              AND idxmap.base_currency = idxstg.currency
              AND idxmap.return_type = idxstg.type
              AND idxmap.mkt_index_id = idxstg.vendor_code
              AND idxmap.monthly = 'Y'
              AND idxmap.file_type = 'T';
    TYPE cur_lvl_idx_tab is table of cur_lvl_idx_mon%ROWTYPE;
    cur_lvl_idx_rec cur_lvl_idx_tab;
    CURSOR cur_idx_mon_hub IS
    SELECT idxhub.ssia_index_id,idxhub.effective_date,idxhub.currency,index_level,idxhub.type,
    idxhub.return_month,idxhub.return_3months, idxhub.return_6months, idxhub.return_ytd, idxhub.return_1year,
    idxhub.return_3years, idxhub.return_5years,idxhub.return_10years,idxhub.market_cap,
    idxhub.mkt_file_id     
    FROM mkt_total_lvl_indx_mon_hub idxhub;
    TYPE cur_idx_mon_tab IS TABLE OF cur_idx_mon_hub%ROWTYPE;
    cur_idx_mon_rec cur_idx_mon_tab;
    l_col_3 cur_idx_mon_tab;
    BEGIN
    OPEN cur_lvl_idx_mon;
    LOOP
    FETCH cur_lvl_idx_mon BULK COLLECT INTO cur_lvl_idx_rec LIMIT c_default_limit;
    EXIT WHEN cur_lvl_idx_mon%NOTFOUND;
    END LOOP;
    OPEN cur_idx_mon_hub;
    LOOP
    FETCH cur_idx_mon_hub BULK COLLECT INTO cur_idx_mon_rec LIMIT c_default_limit;
    EXIT WHEN cur_idx_mon_hub%NOTFOUND;
    END LOOP;
    l_col_3 := cur_lvl_idx_rec MULTISET INTERSECT cur_idx_mon_rec;
    CLOSE cur_lvl_idx_mon;
    CLOSE cur_idx_mon_hub;
    END sp_final_lvl_idx_mon_hub;
    PROCEDURE sp_final_load_mkt_hub
    AS
    BEGIN
    NULL;
    END sp_final_load_mkt_hub;
    END pkg_mkt_hub_load_collection;
    show error
    error code
    Code: [Select all] [Show/ hide]SQL> @pkg_mkt_hub_load_collection.sql
    Package created.
    Warning: Package Body created with compilation errors.
    Errors for PACKAGE BODY PKG_MKT_HUB_LOAD_COLLECTION:
    LINE/COL ERROR
    57/4 PL/SQL: Statement ignored
    PLS-00306: wrong number or types of arguments in call to 'MULTISET_INTERSECT_ALL'
    SQL>
    please give an idea about this error

    Declaration is already visible.
    TYPE cur_lvl_idx_tab is table of cur_lvl_idx_mon%ROWTYPE;The MULTISET operator must be used on collections of the same TYPE. You are attempting to use it on two different TYPEs
    Since PL/SQL records cannot be compared for equality (yet) MULTISET operations on collections of PL/SQL record are not supported. You are attempting to use the MULTISET operator on collections of PL/SQL record.
    I believe this is possible with a collection of persistent object type with a MAP or ORDER method.
    But then again why not just use INTERSECT in SQL?

  • PLS-00306: wrong number or types of arguments in call to 'Test'

    Hi,
    I have problem in my package .. here i will give the sample code .. can u please help me to solve
    i have
    create or replace package TEST is
    PROCEDURE WRITE_FILE();
    end TEST;
    CREATE OR REPLACE PACKAGE BODY TEST IS
    TYPE TY_TIPE IS TABLE OF VARCHAR2(120) INDEX BY BINARY_INTEGER;
    FUNCTION GET_COLLECTION(IN_INPUT IN VARCHAR2) RETURN TY_TIPE AS
    V_TYPE TY_TIPE;
    BEGIN
    -- SOME OPERATION AND FINALLY
    RETURN V_TYPE
    END GET_COLLECTION;
    PROCEDURE WRITE_FILE() AS
    V_TYPE TY_TIPE;
    BEGIN
    V_TYPE:=GET_COLLECTION('test');
    END WRITE_FILE;
    END TEST;
    At the line in bold .. am getting error "PLS-00306: wrong number or types of arguments in call to 'GET_COLLECTION'" like this
    Please help me out
    Regards
    Prabu.p

    No, it is not syntactically fine:
    SQL> create or replace package TEST is
      2 
      3  PROCEDURE WRITE_FILE();
      4  end TEST;
      5 
      6  /
    Warning: Package created with compilation errors.
    SQL> show error
    Errors for PACKAGE TEST:
    LINE/COL ERROR
    3/22     PLS-00103: Encountered the symbol ")" when expecting one of the
             following:
             <an identifier> <a double-quoted delimited-identifier>
             current
    SQL>
    SQL>
    SQL> CREATE OR REPLACE PACKAGE BODY TEST IS
      2 
      3  TYPE TY_TIPE IS TABLE OF VARCHAR2(120) INDEX BY BINARY_INTEGER;
      4 
      5  FUNCTION GET_COLLECTION(IN_INPUT IN VARCHAR2) RETURN TY_TIPE AS
      6 
      7  V_TYPE TY_TIPE;
      8 
      9  BEGIN
    10 
    11  -- SOME OPERATION AND FINALLY
    12 
    13  RETURN V_TYPE
    14 
    15  END GET_COLLECTION;
    16 
    17  PROCEDURE WRITE_FILE() AS
    18 
    19  V_TYPE TY_TIPE;
    20 
    21  BEGIN
    22 
    23  V_TYPE:=GET_COLLECTION('test');
    24  END WRITE_FILE;
    25 
    26  END TEST;
    27  /
    Warning: Package Body created with compilation errors.
    SQL>
    SQL>
    SQL> show error
    Errors for PACKAGE BODY TEST:
    LINE/COL ERROR
    15/1     PLS-00103: Encountered the symbol "END" when expecting one of the
             following:
             . ( * @ % & = - + ; < / > at in is mod remainder not rem
             <an exponent (**)> <> or != or ~= >= <= <> and or like LIKE2_
             LIKE4_ LIKEC_ between || multiset member SUBMULTISET_
             The symbol ";" was substituted for "END" to continue.
    17/22    PLS-00103: Encountered the symbol ")" when expecting one of the
             following:
             <an identifier> <a double-quoted delimited-identifier>
             current
    SQL> This means that you posted some different code that you actually use,... how do you expect help if you don't show us what you have?

  • Wrong Operation number(Activity  Number) showing in Production Order

    Friends
    I have created a production order.
    Wrong Operation number(Activity  Number - RESBD-VORNR) is  showing for some of the Production Order components(all are phantom components only)   where as the activity number in its  Routing components (RCM01-VORNR) is different. So we need to change the activity to correct activity manually in change production order screen(CO02)
    I found one  SAP Note 104322 - Error in reallocating phantom (When reallocating phantom components in a production order to another operation, different errors can occur:
    --  not all dependent components are allocated to the correct operation). We are on ECC 5.0 . This note already exists in our system
    This issue happened only with one BOM . Many other BOMs ( similar type) donot have this issue.
    Can some one from the group help me to resolve this issue?
    Thanks in advance
    Please let me know if you guys need more details
    Thanks
    MVSSAI

    Hi MVSSAI,
    I am just a bit confused if you are talking about wrong operation nos. or wrong activity nos. If I am correct, it should be wrong operation nos. which fetches the activities that are defined in that work center.
    If wrong operation nos. is getting selected then
    Please check if the system is configured with alternative sequence under T.Code: CA01 for a particular group & group counter (just in case you are using nos. of routings for the single material).
    If yes, then check if you have defined priority of the sequence i.e. in which order it has to taken.
    If yes, further check if you have aligned automatic routing selection depending upon the B.O.M. alternatives in routing itself.
    Just in case you have maintained any of these the routing will get automatically selected depending upon the priority that is given to work center and hence different operation nos.
    Regards,
    Pankaj

  • SSRS Calling a Stored Procedure error : PLS-00306: wrong number or types of arg...

    Hi,
    My Problem is when im adding dataset with stored procedure, im getting this error.
    I Can access database, 
    Could not create a list of fields for the query. Verify that you can connect to the data source and that your query syntax is correct.
    ORA-06550: line 1, column 7: PLS-00306: wrong number or types of arguments in call to 'PROCEDURE_NAME' ORA-06550: line 1, column 7: PL/SQL:
    Statement ignored
    stored procedure is simple select :
    CREATE OR REPLACE PROCEDURE [PROCEDURE_NAME](L_CURSOR out SYS_REFCURSOR)
    is
    Begin
    open L_CURSOR for
    SELECT [columnname] FROM
    [tablename]
    End;
    Configuration Details:
    DB: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64biOracle Developer Tools for Visual Studio Copyright (c) 2005,2014 SQL Server Data Tools Type: Oracle , Data Provider : .Net Framework Data Provider For Oracle

    The answer is of inside question. It is about provider. Change my provider ODTwithODAC for 10g (my database version). And problem resolved.
    Thank you for your helps,
    Regards,
    Arda

  • Hi, I have an iPhone 1 that is blocked (because of wrong passwords) and isn't recognized by iTunes. How do I fix this? Thanks for your help!

    Hi, I have an iPhone 1 that is blocked (because of wrong passwords) and isn't recognized by iTunes. How do I fix this? Thanks for your help!
    By the way I'm using a MacMini and all operating systems are up to date including iTunes.

    First try a Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414
    3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
    Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
    iTunes free download from www.itunes.com/download

  • Firefox for Mac preferences shows .qif file format for quicken as "quicktime image format"-wrong application and won't let me select anything else

    Post to Firefox forum; Oct.2011
    Re: Quicken 2007; Mac OS 10.5
    Problem: can’t import or download Qif format files into quicken from bofa or Chase. Mac can’t recognize; how do I set preferences in Firefox (or Safari).
    https://support.mozilla.com/en-US/questions/new?product=desktop&category=d1&search=Firefox+for+Mac+preferences+shows+.qif+file+format+for+quicken+as+%22quicktime+image+format%22-wrong+application+and+won%27t+let+me+select+anything+else&showform=1
    Hello,
    I previously used Firefox on my old Mac G4 with OS 10.3.9; the above issue existed with that system and Firefox 2.00.2 (or similar). I then "tried" to move to a G5 Mac with OS 10.5, hoping that an updated Mac Operating system and updating Firefox would solve that problem.
    I'm now working on my son's MacBook Pro, OS 10.5.8, 2.4 ghz Intel Core 2 Duo; 2gb Memory; 2 gb 667 Mhz DDR2 SDRAM.
    I still have a problem in Firefox Preferences trying to download .qif files. BofA Mortgage accounts only allow downloading of .qif files. My .qfx download works fine, but the error message is as follows:
    The error message is that this is a corrupted file or one that Preview doesn't recognize.
    and it is still a problem when trying to download Quicken .qif format files for our B of A mortgage.
    The preferences for Firefox under File Helpers won't let me name the extension I want; instead, it CONFUSES .qif (Quicken Interchange Format) with .qtif (Quicktime Image Format) for Mac.
    Therefore, when I download .qif files and try to import them to Quicken, I get a message that this is a corrupted file:
    thanks for any help.
    Val in Seattle

    Well, in the end, I just gave up and deleted the photos, in the hope that it was something to do with them. Took some more photos and they seem to have imported without any problems at all.
    Given that the same irksome photos loaded on the wife's macbook without so much as a murmur, how weird is that?
    Still- all's well that ends well. Thanks for the suggestions- much appreciated.
    Matt

Maybe you are looking for