Wrong overall result population in the query output

Hi All,
I have few issues with my query..
we have a query which gives  report about the brand name, brand element, brand group, netsales, cumulative sales and royality percentage.
1. the over all result for the Royality percentage is not getting calulated properly... i have compared the result setting of the other fields which get proper overall result.  i dint find any difference even then i face this issue
2. The royality percentage is a% of netsales.. but here is issue is when i drill down thro Brand element i am getting proper amount i.e. a% of current sales but when i remove drill down am getting wrong value... and this happens only for one brand not for others...i dont understand why is this happening..
3. let us consider we have 4 brands.  for 2 brands my royality percentage is getting calculted properly but for 2 brands it is showing wrong value.
can anyone help me out in this issue...
i dint get even a single clue regarding this... need your expert help

Hi ,
in our report we have calculated roayality fee based up on current net sales.
current sales comes directly from the infoprovider..
the royality fee is 6% of current net sales for each brand element.
Now the issues are
1. we have four brands... for two brands we are getting correct Royality fee.. i.e. exact 6% of its respective current net sales.
but for two brands we are not getting the 6% value..
2. There is one more field named Brand Element.  when i drill down the Brand element, for one brand (out of two which gets wrong royalty fee) alone my royalty fee is getting differed.
ex. with drill down royalty fee is 82.5 (which is 6% of its current net sales)
      after removing the drill down royalty fee is 63.5 (Which is not related)
it is not happening for other brands.. why is it behaving so.
3.  What ever the royalty fee is the overall result of the royalty fee is not getting calculated properly..
I.e.  for four brands if i calculate the total of royalty fee it comes around 380
but now it is displayed as 272 (no idea what total it is)
thanks for the help in advance

Similar Messages

  • Result Row in the query output

    Hi,
    If I restrict a characteristic by hierarchy then I can’t have the result row displayed. If the hierarchy active is removed then the result row gets displayed. All characteristics are marked to show the result row.
    This characteristic is Account Number. If in the query definition I remove the restriction on account numbers and just select hierarchy active and the required hierarchy in the properties then I get the result row in the output. But now it also displays all the unassigned account numbers in a separate node “Not Assigned Account Number (s)”.
    I can’t even restrict it in the output with hierarchy active selected. When I do select filter value in the output the options Include in Selection and exclude from Selection are grayed out and hence can’t select it.
    Please advice on this issue…
    Thank you,
    sam

    Hi Jaya,
    I think you misunderstood my issue.
    My problem is not that i do not want to see the field. But instead, i do not want to see only the results row in the query output.
    I need to have the results to populate a calculation via sumct formula.
    My question is, can sumct be populated if i hide/supress RESULT row ?
    Regards,
    Maili

  • Modifying the text "Result" and "Overall Result" in a BEx query output

    Hi,
    1) Is it possible to modify the text "Result", "Overall Result" which appears in the sub-total and grand total lines of BEx query output? I do not see any related setting the properties area of the object in BEx Query designer. Do I have to write some VB code or can I do something in Customer Exits?
    Also my client wants that this text need to be made dynamic such as "Sub-Total for the month of Jan 2006".
    I can use work book option and change the texts manually.But this is not meeting my clients requirement.
    2)Is it possible to have dynamic title text for a BEx query?
    We are on BW 3.5 & if any of you could provide / guidance to the above issue.
    Thanks,
    Venkatram

    You will have to use VB Macros to change the text "Result" and "Overall Result", there is not settings in the query designer for the same.
    You can have dynamic descriptions for queries using text variables like Expense Query for month of Jan 2006, if user selected Jan 2006.
    Thanks.

  • Virtual Characteristic value not populating in the query output

    Hi Experts,
    I am new to BAPI and I am using this to populate the values of virtual characteristics.
    I wrote the below code to populate if an order status got some status value then i need to populate the flag y if not n.
    I got the order value in the reprot. I need to go to order master data and should get the status and then i have to do the comparision and populate the flag zww_teco in the report.
    The below is the compute method of my implementation class.
    FIELD-SYMBOLS :
    <fs_0cs_order> TYPE ANY,
    <fs_zww_teco> TYPE ANY,
    <fs_status>  TYPE ANY.
    if p_cha_0cs_order > 0.
      ASSIGN COMPONENT p_cha_0cs_order OF STRUCTURE C_S_DATA to <fs_0cs_order>.
    endif.
    if p_cha_zww_teco > 0.
      ASSIGN COMPONENT p_cha_zww_teco OF STRUCTURE C_S_DATA to <fs_zww_teco>.
    endif.
    Select single /BIC/ZSYSTATUS
        from /BI0/PCS_ORDER into <fs_status>
       where CS_ORDER = <fs_cs_order>.
    if <fs_status> CP 'TECO'.
      <fs_zww_teco> = 'Y'.
    else.
        <fs_zww_teco> = 'N'.
    endif.
    But I am not sure why the values are not populated. But when i debug , i could see the values for
    P_cha_0cs_order = 35
    p_cha_zww_teco = 54
    But i could get the values of <fs_0cs_order>, <fs_zww_teco> after assign component statement.
    And it is firing me a dump in select statement. Also when I click c_s_data i am getting S____274, S____505 fields like that in the structure but i could see p_cha_0cs_order
    Can you please guide where i am missing ...
    Thanks
    Vamsi
    Edited by: vamsi talluri on Nov 9, 2011 6:14 PM

    Hi Sushant,
      RSRT --> Enter Query Name
    Click on Technical Information --> If " Virtual Char./Key Figures " = Y
    In my case , even then i clciked generate report,
    even after that P_CHA_0CS_ORDER = 35
    and after assign component P_CHA_0CS_ORDER of structure c_s_data to <FS_0CS_ORDER>.
    the <FS_0CS_ORDER> is nothing , here i should get the value of cs_order value of that record but it is coming empty which i am not able to rectify. How should i change or i need to put any other setting to get the value populated into my <FS_0CS_ORDER>.
    Can you please guide me .
    Thanks
    Vamsi

  • How to display the Overall result value at the top of work book

    Hi,
      How can i display the value of  Overall result(Sum of the Total) column at the top of the work book in Text field.
    Thanks
    Sreadhar

    Go to Query Global properties in Query designer and you can find a setting to show result rows on top. This setting will show overall result as first row in the report. But I don't think you can show it in Text field in WB.

  • Want to See Selected Input Variables in the query output

    Hi al
    My client gives a requirment like they want to see selected variables in the query output. Like suppose if i am  entering Profit center, controlling area, version, caldayas a input on the screen. Now they want to see only Profit center and version on the query result.
    Please let me know if any one has this solution.
    Regards,
    Amit Shetye

    Hi
    Can you please give us user requirement and according to ure requirement so we given replies . If ure requirement please explain detail
    But it is not neccessary that we can put something in free char and all. Inspite of that they wanted to select the input variable as per their requirement. They dont want to restrict them in Free char.

  • Anyway to supress the coulmn names in the query output from SQLPLUS

    Hi,
    I am using sqlplus to run a script which returns the results with column names.
    Is there anyway to omit the column names from the query output from sqlplus?
    I would like to have only results with out their column names in the output.
    Thanks in advance!!

    Hi,
    Maybe your LINES(IZE) isn't set ?
    SCOTT>set lines 130
    SCOTT>select status, machine, module
      2    from v$session
      3   where upper(username) = 'SCOTT';
    STATUS   MACHINE                                                          MODULE
    INACTIVE PFAE3\VPC4894-03                                                 TOAD 9.7.2.5
    ACTIVE   PFAE3\VPC4894-03                                                 SQL*Plus
    2 rows selected.
    SCOTT>As an alternative to setting linesize, you can format columns:
    SCOTT>set lines 80
    SCOTT>col status for a8
    SCOTT>col machine for a30
    SCOTT>col module for a30
    SCOTT>select status, machine, module
      2    from v$session
      3   where upper(username) = 'SCOTT';
    STATUS   MACHINE                        MODULE
    INACTIVE PFAE3\VPC4894-03               TOAD 9.7.2.5
    ACTIVE   PFAE3\VPC4894-03               SQL*Plus
    2 rows selected.
    SCOTT>Regards
    Peter

  • Central Management server - executed a query but how to send the query output in the form of mail?

    Hi All,
    i have used CMS in SQL 2008 R2. i have added couple of servers in its group. i have executed a query & i need to send the query output in the form of email.
    basically query is checking the rows count from couple of user tables in servers.
    issue here is how to copy the data that is used by CMS? i need to work on automate the rows count in difft user table in db servers
    could you please suggest how can i achieve this?

    Copy to what?
    SELECT COUNT(*) FROM sys.objects
    Running the above statement returns two columns (server name and count)
    All the servers SS2005  and onwards , then use
    EXEC msdb.dbo.sp_send_dbmail 
         @profile_name = 'name', 
         @recipients = '[email protected]', 
         @query = 'SELECT COUNT(*) FROM sys.objects', 
         @subject = 'Count rows'
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Consulting:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance
    SQL Server Integration Services:
    Business Intelligence

  • ERROR displaying in the query output... urgetn

    hi experts,
    For the amount keyfigures in the query output it displaying ERROR after the amount like ex- 2000 ERROR.
    plz let me know how to rectify this..
    regards
    vadlamudi

    hi,
    i have created only two keyfigures EMP_BASIC and EMP_HRA. and in the transformations i have mapped with 0DOC_CURRCY.
    but in the report its showing ERROR only after the amount. plz tell me exactly with what field i need to map???
    regards
    vadlamudi

  • How to get the Query output to Excel

    Hi ,
    Can you tell me how to get the Query output to excel with out using any third party tool?
    Can you tell me how to write the code in Webservice and call it..
    Please explain it Elaboartly..
    Thanks in Advance!!!
    Mini

    whats your source system?
    you can use Live office, or query as a webservice if you are getting data from universe
    if you're getting data from SAP BI query and you have a java stack on your netweaver then you can get the data directly using sap bi connector in xcelsius.
    good luck

  • How to display header title for 0MATERIAL texts in the query output?

    Dear Bwers,
    I have a requirement where i need to display headers titles for 0MATERIAL texts in the query output. (example "Material description"). Any ideas on how to do this?
    Thanks
    Raj

    Kamal,
    Its is as below:
    <b>Vendor</b>    <b>Vendor Name</b>
    1001 ---            Bright Industries
    1002 ---            Glow Industries
    I want to display the header title "Vendor Name" as the  title in the column instead of displaying the text without any header title.
    Thanks
    Raj
    Message was edited by:
            Raj Singh
    Message was edited by:
            Raj Singh

  • Suppress zero rows in the query output.

    Dear Experts,
    We executed a query. In the output the values are displayed based on a hierarchy on gl account.
    But in the output some rows dont have any values i.e 0 value. Still those rows are appearing in the report output.I want to
    supress entire row. How to supress the entire row if no value i.e zeros are appearing in the query output.
    Regards,
    Bhadri M.

    go to change mode of query
    in that set the query properties /go to the query property secreen
    in the "Display " tab set the supperssion as "active (all value=0)" and in structure properties select the check box "also use  zero suppression for strucure element"
    i think it will be help ful
    Edited by: Soma Venkateshwarlu on Aug 28, 2009 2:40 PM

  • How to replace # in the query output ?

    Hi experts,
    In the query output and for a particular field in a record if there is no value then it is displaying as '#'.
    Can  we replace '#' with any text or with any other value ?
    Regards,
    Nishuv V.

    hello,
    if you display the characteristics as Key u will get as '#'.
    You can select as Text,then it will show 'Not Assigned'.
    Further, check on these threads:
    How to replace '#' with blank when there is no value for a date field
    Re: How to replace display attribute Value '0', instead of '#' in the query
    Reg,
    Dhanya

  • Issue with Saving the Query output data in Excel format

    Hi,
    Recnetly we had upgraded from 4.6c to ECC 6.0.
    In ECc 6.0 environment, when user try to export the query output , we are getting only XML option to save the data.
    But user want to save the data in EXcel format, he was able to do that in 4.6C.
    pleas eprovide some inputs, on this issue.
    Thanks,
    Sanketh.

    I cannot for the life of me imagine, why a link to a post in the 'Business One Forum' where one uses ODBC to transfer query-data to MicroSoft Excel is of relevance to the OPs question, even if the same is not a security issue.
    Never mind. [note 40155|https://service.sap.com/sap/support/notes/402155] deals with various symptoms in the ALV-Excel combination as as of release 4.6C. There are various others, mostly in components BC-SRV-ALV and BC-ABA-LI - also: I remember that when we upgraded from 4.5B to 4.7C there was an issue with Excel-templates -> the solution was in the release notes somewhere. So, in addition to SMP you might want to check the release notes and/or upgrade guide for solutions.
    And yes, moderators ... this is not a security issue, this should go to ECC-Applications/Upgrade.

  • How to get  the Overall result and Avg in Query

    Hi
    I am facing a problem to find Overall result and Avg for the keyfigure.
    Here is the scenario.
    I have a fiscalperiod ,qty in query column and material in row, when user enters the fiscalperiod(004.2006 to 006.2006)
    the output should come as
       0406 0506 0606  Avg
    M1  10  20   40     35
    M2  20  40   30     45
    res 30  60  70
    i can able to get the overall result not avg,
    if i change the properities of keyfigure 'Calicuate Result as 'Average of all values'',then i am loosing the overall result.
    eitherway i can able to get one result,not both.
    anybody can help.
    Thanks
    Madhu

    You have 2 key figures and you have put Material in the ROWS.
    Remove Material from ROWS and instead use 0FISCYEAR in the row selection.
    You can create 12 Key figures for each month and use either Filer or Free Characteristic using 0CALMONTH to restrict the month for the selection Variable.
    For the Key Figures use "Calculate Single Value as" Average.
    Create another formula as KF1KF2....+KF12 to get the sum of average.
    Regs
    Gopi
    Assign points if it helps...

Maybe you are looking for