Anyway to supress the coulmn names in the query output from SQLPLUS

Hi,
I am using sqlplus to run a script which returns the results with column names.
Is there anyway to omit the column names from the query output from sqlplus?
I would like to have only results with out their column names in the output.
Thanks in advance!!

Hi,
Maybe your LINES(IZE) isn't set ?
SCOTT>set lines 130
SCOTT>select status, machine, module
2    from v$session
3   where upper(username) = 'SCOTT';
STATUS   MACHINE                                                          MODULE
INACTIVE PFAE3\VPC4894-03                                                 TOAD 9.7.2.5
ACTIVE   PFAE3\VPC4894-03                                                 SQL*Plus
2 rows selected.
SCOTT>As an alternative to setting linesize, you can format columns:
SCOTT>set lines 80
SCOTT>col status for a8
SCOTT>col machine for a30
SCOTT>col module for a30
SCOTT>select status, machine, module
2    from v$session
3   where upper(username) = 'SCOTT';
STATUS   MACHINE                        MODULE
INACTIVE PFAE3\VPC4894-03               TOAD 9.7.2.5
ACTIVE   PFAE3\VPC4894-03               SQL*Plus
2 rows selected.
SCOTT>Regards
Peter

Similar Messages

What is the exact name of the cable I need to connect my old hard drive from my macbook pro (it has been taken out of the computer) to my new macbook pro? I need to transfer files from the old hard drive to the new computer.

What is the exact name of the cable I need to connect my old hard drive from my macbook pro, which has been removed from the computer, to my new macbook pro? I need to transfere files from the old hard drive to the new computer.

No eSATA to USB. Just a SATA/IDE to USB adapter. Google SATA/IDE to USB adapter and you will get tons of links to buy them. Most likely your local computer electronics store has them, although they might be more expensive buying locally than online.
I have several. You can get either USB 2, which what I recommend, or USB 3. USB is backward compatible so a USB 3 adapter will work on a USB 2 port and a USB 2 adapter will work on a USB 3 port. Backward compatible in both directions.
I suggest a USB 2 type because there have been some problems with certain USB 3 devices, the USB 3 interface used isn't all that good in those certain devices. USB 3 is still fairly new where as USB 2 has been around for over 10 years.
synghem wrote:
Thank you LowLuster,
At the apple store they said I needed an esata to usb wire. But looking at wires on line has been confusing. Is sata the same as esata? How do I know if I need a usb 3 or usb 2?

I have some loops from acid 5 which I have dragged in a folder to the loop browser. Some of them retain the folder name in the View: and some don't. I have had some that seem to go in but I can't find them. Where should I look?

I have some loops from acid 5 which I have dragged in a folder to the loop browser. Some of them retain the folder name in the View: and some don't. I have also had some that seem to go in but I can't find them. If I try to add them again, I get a msg that they are already there. Where should I look?

It may be best to recreate the folder and the smart playlists from scratch.
tt2

How do I get Mozilla to use the page name for the actual bookmark name instead of the URL when I bookmark a page

I just noticed this (in comparison to Internet Explorer): In IE, when you favorite a webpage, it uses the actual name of the webpage (for example, for this page, it would be "Ask a Question Firefox Help" as the bookmark name), but in Mozilla it uses the URL address as the bookmark name. I was wondering if it was at all possible to change my Mozilla settings in order to make it use the webpage name as the bookmark name instead of the URL address? I hope everyone understands what I'm getting at? If anyone can help me, I would really appreciate it. Thanks.

Does this happen with each bookmark?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Problems with bookmarks and history not working properly can be caused by a corrupted places.sqlite database file.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
You can try to check and repair the places database with this extension:
*https://addons.mozilla.org/firefox/addon/places-maintenance/

Getting the variant name when the report program is run in background

Hi All,
How to get the variant name for the report program when run in background? My requirement is to create an email attachement with the name 'variant.XLS', where variant = selection screen variant, when the report program is run in background. The system field SY-SLSET holds the variant name only when run online.
Any pointers to this will be highly appreciated.
Thanks and regards,
Nilesh.

Hello Nilesh,
Please find the algo:
1. Call the FM: GET_JOB_RUNTIME_INFO to get the background job details.
2. Select data from TBTCP using these details:
DATA:
FP_EVENTID   TYPE BTCEVENTID
FP_EVTPARM   TYPE BTCEVTPARM
FP_ACTIVE    TYPE BTCXPGFLAG
FP_JOBCNT    TYPE BTCJOBCNT
FP_JOBNM     TYPE BTCJOB
FP_STEPCNT   TYPE BTCSTEPCNT.
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
    IMPORTING
      EVENTID                 = FP_EVENTID
      EVENTPARM               = FP_EVTPARM
      EXTERNAL_PROGRAM_ACTIVE = FP_ACTIVE
      JOBCOUNT                = FP_JOBCNT
      JOBNAME                 = FP_JOBNM
      STEPCOUNT               = FP_STEPCNT
    EXCEPTIONS
      NO_RUNTIME_INFO         = 1
      OTHERS                  = 2.
IF SY-SUBRC <> 0.
*   Error calling FM: GET_JOB_RUNTIME_INFO
ENDIF.
DATA: FP_VARIANT TYPE BTCVARIANT.
SELECT JOBNAME JOBCOUNT STEPCOUNT VARIANT
FROM   TBTCP
INTO TABLE L_IT_TBTCP
WHERE JOBNAME   = FP_JOBNM
AND    JOBCOUNT = FP_JOBCNT
AND    STEPCOUNT = FP_STEPCNT.
IF SY-SUBRC = 0.
    SORT L_IT_TBTCP BY JOBNM JOBCNT STEPCNT.
    READ TABLE L_IT_TBTCP INTO L_WA_TBTCP INDEX 1.
    IF SY-SUBRC = 0.
      FP_VARIANT = L_WA_TBTCP-VARIANT.
    ENDIF.
ENDIF.
Hope this helps.
BR,
Suhas

I started downloading my Upgrade to Photoshop Elements Version 13 and received my upgrade confirmation and cannot locate the download on my PC running Windows 7,what is the exact name of the download and where should I find it?

I cannot locate the upgrade to Photoshop Elements 11 to Version 13, which I purchased today and started the download as per the Order Confirmation. My order No. is AD014117711. I am running Windows 7 on my PC and cannot locate the Download. How do I find it? What is the exact name of the Download?

EdWeidman by default the download will be saved to your Download folder. I do not know the exact name of the file which was provided to you.

How to display the responsibility name in the header of a SS page?

Customer is wanting to show the Responsibility name at the top of the Self Service page, similar to the way the PUI forms does.
For example, if you are in Forms and have the System Administrator responsibility opened, in the top of the forms window you will see: System Administrator
The customer has several iProcurement responsibilities
“KNAW Internet Procurement 210”
“KNAW Internet Procurement 220”
“KNAW Internet Procurement 230”
“KNAW Internet Procurement 240”
“KNAW Internet Procurement 250”
and would like to see the which responsibility they are in displayed at the top of the SS/OAF page.
They are on R12.1.2, and I have looked through the Framework Profile Options but not finding anything there.
Is there a way to do this?
Thanks,
Randy
my ref.3-3132851721

hi,
is there any generic fix for this. if we want to display then we need to change the each page CO . is it a possible solution. or any generic solution. Please provide
Thanks
Smarak

How to change the folder name in the web report.

hi experts,
can anybody give me the solution, how to change the folder name in the web report. any help is appreciated.
waiting for ur favourable response.
thanks
suri

Hi Tony,
Yes, the business requires, only to change in the webreport only not in bex and roles. any suggestions will be helpful to me.
thanks
surendra

Error message in time machine: "There was a problem with the user name or the password of the network

I have been unable to back up my macbook to my time capsule for some time now. I received the following error message (translated from Swedish) when trying to back up using time machine:
"The network's volume could not be placed on the desktop. There was a problem with the user name or the password for the network.
Open system preferences and go to Time Machine. Select the volume for security backup again and state the correct user name and password."
I have confirmed the network password, and also tried with resetting the password. I have not idea what else to do. Any help is much appreciated.
Best regards,
John

I have been unable to back up my macbook to my time capsule for some time now. I received the following error message (translated from Swedish) when trying to back up using time machine:
"The network's volume could not be placed on the desktop. There was a problem with the user name or the password for the network.
Open system preferences and go to Time Machine. Select the volume for security backup again and state the correct user name and password."
I have confirmed the network password, and also tried with resetting the password. I have not idea what else to do. Any help is much appreciated.
Best regards,
John

How to find out the printer name for the Idoc

Hi guys
I want to find out the printer name for the Idoc,,some default printer is attached for one idoc,then how can we see the printer name for this idoc.
Regards
Madhoo

Hi,
For ALE/IDOC the medium will be either ALE or EDI but not printer.So it might be wrongly attached.As such there won't be any printer attached to idoc.
Regards,
Nagaraj

What is the registry key in Adobe Acrobat v9 which turns the dialog off: any form fields that have the same name in the merged documents are now...

what is the registry key in Adobe Acrobat v9 which turns the dialog off: any form fields that have the same name in the merged documents are now...

There is no key because that is an important dialog. Why would you want it to go away?

What are the icons next to the printer name in the print sheet?

Ever since I upgraded to OS X Lion, I have noticed something different in the print dialogue. First the technical info: I am using a 2009 Mac Mini (4 GB RAM, OS 10.7.3) and I have a couple of printers that I use - one is a Brother laser printer (shared from an iMac, running 10.6.8) and a Canon Pixma Pro 9000, connected via USB to a Time Capsule.
When I hit Command-P to bring up the print sheet, I now get icons on the left hand side of some of the printer names in the printer list. One looks like a road sign - diamond shaped with a walking person in it, and the other is a circle with a wavy line (tilde?) in it. The other printer names have no icons next to them. I gather that the circle-and-tilde means "printer not available" (or something similar) - even though the printer is there!!! And then I wonder why the other printer names have no icons, and I have no clue what the "walking person" sign means.
I'm adding a couple of images so you all can see what I'm talking about:
What do these icons mean? I can find NO reference to them - even in Apple's knowledge base article http://support.apple.com/kb/HT4670 - this just looks like the screen shots from the 10.6 Snow Leopard page. I looked in the OS X Lion Missing Manual, but it has the same screen shots with no explanation of the icons.
This is pretty minor, but it's been bugging me for a while. Any explanation or reference to these icons would be appreciated!
Richard
Message was edited by: Richard Williams Jr (had to correct the link!)

Richard Williams Jr wrote:
Wow, impressive, thank you! Is there a listing or other resource available that can tell me what all these symbols mean? Or are they the only ones?
This Mac 101: Printing article mentions some of the icons you will see in 10.6. And there is also the Mac 101: Printing article for Lion that shows some symbols. Neither show the icon you are seeing for the Brother but this is icon has been around for a while and used for warnings/information alerts.

How to get the specific name of the workset which is currently selected by the user in sap portal 7.0

Dear Expert,
I have one requirement like to read the selected workset name in portal by the current user.I have read two documents regarding how to retrieve the PCD contents (iViews, Pages, Worksets and Roles) and its properties like Created by, Changed by, Last changed by and others using PCD API.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6112ecb7-0a01-0010-ef90-941c70c9e401?overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/508baf88-9335-2d10-efa6-c6ad61e5fc4b?quicklink=index&overridelayout=true
But I am not able to understand how to get the specific name of the workset which is currently selected by the user.Can you please help me.
I am using portal 7.0.
Thanks & Regards,
Patralekha

Hi Expert,
I found that we can use Interface INavigationHelperService to read Portal Role selected by user at runtime from http://scn.sap.com/thread/52194
But this class is available in SAP NetWeaver 7.30 Enterprise Portal .
But in SAP NetWeaver 7.0 Enterprise Portal that interface is not available.
INavigationService is available there.
But didn't get any proper discussion on this interface for the same requirement.
Can you please help me.
Thanks & Regards,
Patralekha

How can I set the Object Name to the file name on import?

All-
I've been manually typing the filename into Aperture's Object Name metadata field. Is there a way to do this automatically? I use metadata presets to fill in many other fields on import but haven't found a way to set metadata fields on a file-by-file basis.
Perhaps there's a way to do this with the thousands of images already in my library as well...
Thanks,
Andreas

Here's the cleaned-up version:
tell application "Aperture"
set selectedImages to the selection
repeat with i in selectedImages
set tName to name of i
set value of IPTC tag "ObjectName" of i to tName
end repeat
end tell
Some other related bits, which you can probably work out how to put into the above script:
Find out the AppleScript names of the IPTC tags (but only tags which have a value for that image), the names will be listed in the 'result' pane in the Script Editor:
tell application "Aperture"
set selectedImages to the selection
get name of every IPTC tag of item 1 of selectedImages
end tell
The same for EXIF tags:
tell application "Aperture"
set selectedImages to the selection
get name of every EXIF tag of item 1 of selectedImages
end tell
And for any custom tags you have set up. If you haven't set up any custom tags (one of my main reasons for going with Aperture) this will just return camera and picture time zones:
tell application "Aperture"
set selectedImages to the selection
get name of every custom tag of item 1 of selectedImages
end tell
Finally, keywords:
tell application "Aperture"
set selectedImages to the selection
get name of keywords of item 1 of selectedImages
end tell
To grab the first keyword name try 'name of keyword 1 of...' etc.
To grab the parent keywords for hierarchical keywording stuff try experimenting with 'get parents of keywords of'. The keywords seem to be read-only from AppleScript, so a magic script that added all parent keywords doesn't seem to be possible.
Ian

[svn:bz-trunk] 15217: Bug: BLZ-508 - If server receives message for an unknown destination it shouldn ' t include the destination name in the error message sent back to the client .

Revision: 15217
Revision: 15217
Author:   [email protected]
Date:     2010-04-05 03:43:36 -0700 (Mon, 05 Apr 2010)
Log Message:
Bug: BLZ-508 - If server receives message for an unknown destination it shouldn't include the destination name in the error message sent back to the client.
QA: Yes
Doc: No
Checkintests: Pass
Details: Changed the error message to not include destination id. I'm also checking in a few minor fixes I had locally.
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-508
Modified Paths:
    blazeds/trunk/modules/common/src/flex/messaging/errors.properties
    blazeds/trunk/modules/core/src/flex/messaging/MessageBroker.java
    blazeds/trunk/modules/core/src/flex/messaging/cluster/JGroupsCluster.java

Thanx Mete, yeah i did...
but i solved it some other way... not entirely sure this was
it though as i was doing a lot of things at once...
it was fds.swc... possibly it was out of date or missing.

Anyway to supress the coulmn names in the query output from SQLPLUS

Similar Messages

Maybe you are looking for