Wrong packeging unit problem

hi Gurus
when creating packing against sto all item was packed as box unit but 1 item wrongly packed as pc unit.when i check the invoice print out it seems 123 boxes against 113(1 box = 10 pc).
I can not cancel the bill bcos it already passed to accounting and it is very old bill.
how can i solv this problem?
if any one can help me out.
Thanks and regards
Tuhina

Similar Messages

Wrong Org unit determination when a user is assign to multiple Org unit

Hi Experts,
I have a user who is assigned 3 org units. All the three fall under the same parent of Org unit.
Now when the user logs in & executes the tcode CIC0, she gets a pop up asking to selet a Org unit out of the 3 available option.
No matter what the user selects, system always pick the first Org unit ignoring the selection made by user.
We are using SAP CRM 4.0 win client version.
I went through the below link but this did not have any solution
Multiple business roles and org data determination
Please help!!!
Please refer the screenshot
http://img213.imageshack.us/img213/989/cic0q.jpg

Hi Joaquin,
When the user log in he gets a pop up asking to choose a Org unit, please refer the screenshot in my previous post.
No matter what he selects, it the first Org structure gets assigned.
Please refer the screenshot below
The business activity screen shows the 1st Org unit. Hence user thinks he has selected the the 2nd org unit creates a Business activity but that gets assign to the wrong org unit unless it is changed manually.
http://img528.imageshack.us/img528/2821/businessactivityscreen.jpg
Is it because they both have the same profile

I have an iPhone 6 and an iPad air and each time I try to download the IOS 8.1 update I get the message "software update failed. An error occurred downloading iOS 8." What is wrong? This problem is ridiculous and frankly annoying

I have an iPhone 6 and an iPad air and each time I try to download the IOS 8.1 update I get the message "software update failed. An error occurred downloading iOS 8." What is wrong? This problem is ridiculous and frankly annoying. I have a brand new iphone 6 and a 8 month old iPad Air what is the problem

Hi Wingzfan13,
Thanks for the question. Based on what you stated, it seems like you can't update the iOS device. I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
If you can't update or restore your iPhone, iPad, or iPod touch
Resolve iOS update and restore errors in iTunes
Thanks for using Apple Support Communities.
Cheers,
Mario

My iphone 5S will send texts as imessage but frequently switches to regular (green) messages even for people that I know use imessage - since we have exchanged (blue) messages previously. Is there something I can do to fix this or is it a unit problem?

my iphone 5S will send texts as imessage but frequently switches to regular (green) messages even for people that I know use imessage - since we have exchanged (blue) messages previously. Is there something I can do to fix this or is it a unit problem?
Please help.

You can try to log out of iMessage and then sign back in. However, even under optimal conditions, iMessage will not always work. That's why the option of 'Send as SMS' is so important. There might be temporary outages in the related iMessage servers.

Contract printing problem "Wrong price unit"

Hello,
I have created a Consignment contract item with target qty. There is no price neither price unit mentionned at this item
When I have printed the output message the following data are displayed.
material number : OK
material description : OK
value/price unit : NOK
In fact, in the preview I get XX$/1KG instead of XX$/1000kg as mentionned in the info record
When I check the contract language I find that it is different from the plant language FR instead of EN.
so I performed following tests:
1- When creating a new contrat with same values and I change the language key to EN===> there is no printing problem "OK"
2- When creating a new contract with samevalues and I change keep langage as FR===> Printing a proble apperas in the price unit   1kg instead of 1000kg   "NOK"
PLease to advise about potential reasons

I remark that the Key Language in the contract is different from the plant language:
I performed the following tests:
1- When creating a new contrat with same values and I change the language key to EN (the same as the plant language) ===> It is working fin "OK"
2- When creating a new contract with same values and I change keep langage as FR (different from the plant language) ===> Printing a problem occur in the price unit   1kg instead of 1000kg   "NOK"
Please to advise about potential reasons

Customs Declaration: wrong legal unit displayed

Hi, we have a funny situation in the customs declaration doc CULOEX where in the organisation data tab all the available legal units are shown, when only one is assigned to the FTO in the config.
When we select the correct LU, the wrong one disappears. This does not look right and could confuse users anyone else had the same problem?
Thx
Philip

Check one more time the legal unit assignments to the foreign trade org.
check your legal reg determiniation also. Might be it is trying to determin the country that is not assigned properly.

Handling Unit Problem

Dear Friends,
I am facing some prblems in Mannual Packaging at the time Delivery. After the Transaction code VL01N when I am clicking for Packaging and then "Pack. Proposal", the system is giving error stating that "No packing instruction could be found for material 1482". In detailed screen it is telling "Diagnosis
The system could not find a packing instruction for material 1482.
Procedure
This problem can have various causes, such as:
o there is no packing instruction determination record for this material
o the wrong determination procedure was used to start packing instruction determination."
I have configured everything and in the Material master of Mat 1482 I have given Packaging type VERP and I have created packaging Material as CARTON.
Please help to resolve the issue. What is "Packing Instruction determination record" .
Thanks,
Jans

Hello Jans
Packing Instruction determination record is a master data (condition record) which specifies how automatic packing needs to be done. I think you tried to do automatic packing.
T code : POP1
Menu Path: Logistics / Central Functions / Handling Unit Management / Master Data / Packing Instructions/ Create.
Read more about it here:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/ed/a4877e701311d288db0000e8214d78/frameset.htm

Controlling area already used for org. unit problem

Hi people,
can you please help me with one problem, my customer is upgrading SAP HR from 4.6 to 6.0 and now we are testing QAS system.
When I create new or. unit in PPOME, I have Cost-centre inherited from the org.unit above, but when I want to put another Cost-centre it gives me the next error "Controlling area HR01 already used for organizational unit XXXXXXXX".
The same procedure worksin PRD system which is on version 4. 6. Could you please help me what is wrong because i am not able to change cost centre in the QAS system.
Thank you.
Romano
Edited by: Romano Cinotti on Oct 13, 2009 11:25 AM

Hi,
To which object u are going to change the cost center i.e, position, job, org.unit.
If you are changing the cost center to position, If it is not allowing to change the cost center then u have to check the parameters:
May be u already assigned cost center
May be u already assigned cost center to ur org, unit, which u assigned to ur position. If u already assigned diffrent cost center to ur org.unit, you may not change the cost center to ur position or job.
Regards
Devi.

Handling Unit problem in Packing for STO

Hello All,
The problem is related to Packing process in case of Stock Transfer Order (STO).After making delivery while doing the packing procedure, in " Handling Unit " supplements 'Handling Unit Group 1' field is not getting populated / assigned automatically (under additional data tab) though all the master data against 'Handling Unit Group 1' for example 00001 to 00500 are already maintained.Apart from this the combination of finished good & packing material in the packaging instruction in POP2 are also maintained.
Point to be noted is in another scenario the handling unit is getting automatically populated in the packing process after delivery where also the above mentioned areas are not maintained, but still it is working properly which is not clear why & how is this taking place.
The procedure followed in the second scenario which is working are as follows -
In outbound delivery change mode (T Code - VL02N) go to Pack -> Click on Pack Proposal -> Expand packing instruction -> select 602 -> Create HUs -> Message shown is Handling Units were created -> click on Pack material & select the 'Handling Unit' line -> then select 'Detailed view general' -> then go to Additional Data where in Handling Unit Group 1, value is automatically populated / assigned for example 00027.
In my process the value for example 00001 is not getting automatically populated/ assigned.How to do this ?
Looking forward to some valuable suggestions at the earliest.
Thanks & Regards
Priyanka Mitra

I see you hae reposted the question, please request for a solution from SAP they might proide you an OSS note.

Unit Test code using wrong persistence unit

In the midst of learning Maven, I created a simple application in which I am using JPA (Java Persistence 1.0.2) with EclipseLink implementation (2.0.2).
Note: This is an Application Managed environment. So I manually control EntityManager's life cycle.
The persistence.xml file used by the main source code is different from the one that unit test code uses. Main code uses an Oracle DB and the test code uses an in-memory Derby.
Running unit tests was updating the Oracle DB (!) and I eventually managed to fix that by using two different persistence-units in the XML files.
However, I don't understand why that fixed the problem. I manually create and shut down the entity managers and they are not running concurrently. I'm pretty sure Maven (or the way I set it up) doesn't mess up the resources (XML files). In fact by looking at Maven's debug output I can see it's using the right XML file for unit tests.
Could someone enlighten me, please?

Do you have both persistence.xml files on your classpath? If so, and they contain the same name for their respective persistence units, you should be getting a warning or error since they must have unique names. There is no way to tell which one you want to access otherwise.
Best Regards,
Chris

Cannot load library unit problem

Dear All,
I am using Oracle Report builder 6 and Oracle DB is 8i.
OS is SUN Server.
I have the following question:
After I modify the function in the formula column, I try to compile it. Then I got the error like:
Error 907 at line 0, column 0
cannot load library unit <Scheme Name>.<Table Name> (referenced by
CF_CAL_5FORMULA)
How to solve it? Thanks......

Hi,
had the same problem. Flushing the shared helped.
alter system flush shared_pool;
Regards
Helmut

Currency Unit Problem

Hi all,
I have a problem to display amount of different currency unit in a single column. i want to display report amount based on account no
on that i have some canadian account and US account. amount unit for canadian currency is CAD and for US it is USD. user wants to display amount and there unit side by side. the problem is in the subtotal or overall result is comming as * due to CAD and USD. i cant use NDIM function as user wants to display amount and currency unit together.
can any one suggest how can i solve this issue.
samit

one more option would be:
Create two restricted KeyFigures. One for USD and one for CAD .So that you could see all USD amounts in one column and all CAD amounts in different column..Hide base keyfigure.Now you will not get * for subtotals and Overall result and amount and currency unit will be displayed together
Message was edited by: Murali

DVD-ROM Unit problem

If I try to load a DVD disc it'll only make some loud breath voice which falls after 2 seconds and it periodically repeats until I take out the disc. Here's the information I found in msinfo32 (I translate it from my motherlanguage to english so it's probably not 100% correct):
Unit F:
Description Unit CD-ROM
Medium Loaded No
Medium Type DVD Writer
Name hp DVD RW AD-7721H
Manufacturer (Standard unit CD-ROM)
State OK
Transmission rate -1.00 kB/s
Target ID device SCSI 1
ID device PNP IDE\CDROMHP_DVD_RW_AD-7721H______________________1.80____\4&3A93AF2C&0&0.1.0
Driver c:\windows\system32\drivers\cdrom.sys (6.1.7601.17514, 144,00 kB (147 456 bajtů), 18.8.2012 17:12)
Could you please tell me if it's a software disruption or the DVD ROM is simply damaged.

Hi,
The first thing I'd suggest is to eject the drive tray and use a soft material like cotton to gently clean the lens.
Check if this has made any difference.
If not, try the automated fixit from Microsoft on the link below.
Windows 7
Vista
Check if the drive is now working.
If it still doesn't work, click the Start Menu, open All Programs, open Accessories, right click the Command Prompt and select 'Run as Administrator'. In to the prompt type the following command and hit enter.
sfc /scannow ( note that there is a space between sfc and the / )
Let the process complete, then type exit and hit enter.
Next, click the Start Menu, open the Control Panel and click on Device Manager. Next click to open DVD/CD-ROM Drives. Right click the drive and select uninstall. Do not delete drivers if asked. When the device has uninstalled click on the 'Scan for Hardware Changes' icon ( usually just below Help on the toolbar ). Let windows reinstall the drive and see if it now works.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Unit Problem

Dear Gurus.
We have different process on one product.After every operation code changes.
Operation are
Cutting unit KG (after cutting)
Forging unit PC
Heat Treatment unit PC then
Machining unit PC
we done all the operation on single rod but my problem is now this machining piece we are selling by cutting into 4 pieces
as sales order is of 4 pc How to do it?
Please help
Thanks & Regards
Harish

Hi,
You can mentain alternate unit of measure in Material Master => Additional Data on Unit of measure tab page. On this page u can maintain ratio of Kg to PC.
Hope this will help you.
Regards,
Ashish

Logic pro 8 audio unit problem

My logic pro 8 install doesnt seem to go anywhere from the dialogue box that says that it is updating the audio units. I get to the menus but if I try to start the audio unit manager, it crashes. I have tried uninstalling all my audio units and other software and updating to the latest version but it did not help.
Im running the latest version of Leopard (10.5.2) on a 2 GHZ intel core 2 duo macbook.

Yep I had the exact same problem. I'm running MacOSX 10.5.2.
I deleted the file ~Library/Caches/com.apple.audiounits.cache as described in this article:
http://support.apple.com/kb/TS1086
and my Logic runs perfectly now...
Hope this helps.

Wrong packeging unit problem

Similar Messages

Maybe you are looking for