Wrong signature inserted by Mail by default

I have multiple email accounts. When I choose, Send New Mail Through Account "A", the signature for account A is always inserted. However, the account being used when I reply to incoming mail is the email address that received mail was addressed to. So I reply to mail in account B, the signature drop down says NONE, but my account "A" signature is already there. I have an email in composition that is to be sent using account B and has the sig for account A in there. I have to manually go into the signature drop down, choose the sig for account B (the only available choice aside from None), and the proper signature is inserted. I have different signatures for each account, by the way.
I presume that Mail should either insert the signature assigned to that account (fine by me) or insert no signature when it is reflecting NONE as the signature chosen in these replies. The current behavior has to be an error, in my view. Does this get reported to Apple Developers? I want to report this bug.
Thanks.
PowerBook5,2, BootROM 4.7.1f1, 1 processors, PowerPC G4 (1.1), 1 GHz, 768 MB Mac OS X (10.4.6)
PowerBook5,2, BootROM 4.7.1f1, 1 processors, PowerPC G4 (1.1), 1 GHz, 768 MB Mac OS X (10.4.4)

Someone writes me on my home account.
I hit reply.
Mail correctly opens a reply using my home account,
but it inserts my work signature in there.
I too have just experienced this problem, except the other way around. In fact I just sent a "work" email to my boss from my home that has my home signature in it. Hope she doesn't notice!!
I have a work account (IMAP) with 2 work sigs with one as the default and 2 home accounts with several home sigs, each account also with one as the default. Whenever I reply to a work email, the window that pops open ALWAYs has a home sig in it. I have to either click on the account pop-up list and re-select the work account (and then the correct sig magically appears) or go to the sig pop-up where (unlike you if I'm understanding correctly) the work sigs ARE listed and I can choose it from there.
Further,
the signature dropdown in the composition window is
set to None.
Yes I'm experiencing that also.
When I go to the sig dropdown, it only
offers zeb@home -- the correct sig, and the only sig
associated with my home account. I choose it and the
correct sig replaces the incorrect work sig.
This I'm not seeing...the sig list in these wrongly sigged work reply emails shows the correct list of work sigs. It's displaying a home sig which is labelled as "None". But unlike you, for me the right sigs are listed there and I can choose it then and all is well. My only problem is that now I have to check my sigs to make sure.
Also, this only happens when I reply to work emails. New work emails don't have this problem. It doesn't happen at all with any of my other two accounts.

Similar Messages

My mail send defaults to wrong mail server. How do I change it?

My mail send defaults to wrong mail server. How do I change it?

That was a long time ago. I don't even remember asking the question. I don't have that trouble at the moment.

Using signature in mail as default

How do I make my signature in mail my defaul?

In Mail>Preferences click the Signature tab and use the Choose Signatures drop down menu to selecrt the signature you want as your default.
Matt

Mail: unable to connect to my SMPT server? Also new Mail Account defaults to iMap and won't let me change to Pop?

Dear All,
I've been with the same UK internet and email provider for years and they've given me solid and reliable service. I've worked my way through the Apple Knowledgebase checklist and tests and proved that my isp/esp is working normally so the problem has to be with Mail.
I fiddled about trying to create a Mail Account on my late 2011 but-new-to-me MacBook Pro a couple of days ago and, it might be completely unrelated and simply a coincidence, but since then none of my devices, Iphone 4S, Powerbook G4, iPhone 3G, the MBPro can send email using Mail.
Whenever I try I get prompted for my password but when I enter it says it's wrong but it definitely isn't because I even changed it this morning through my isp/esp and it worked and I then changed it back again to my correct password and it works also to get into webmail that is, not via Mail.
When I run Mail\Window\Connection Doctor and check the status it shows Mail is unable to connect to server but that it can connect to the internet. I get the following message: Trying to log in to SMPT account failed. Try to verify that username and password are correct.
Now, whenever I try to create a new email account on MacBook Pro Mail keeps defaulting to iMap and wont let me change it to Pop which is what I need.
Does anyone have any ideas?

Dear All,
I'll finish off this thread in case it's of use to anyone else in the future.
I couldn't get the email pop account to recognise my sign-in even though I've been using it continually and without problem for the last several years. It's always been BT and Yahoo so it's more likely to be the fiddle about I did on my temporary, pre migration user account that caused the hiccup.
In th end I had to create another pop account which I was able to once I'd migrated my settings from my PB G4 to the MB Pro. Unfortunately this didn't merge the numerous email folders that I'd created previously in Mail but I still have them on the PB and I believe they can be transferred manually which is what I will do.
Thanks for everyone that took the time to help.
K

Two users on different machines seem to be sharing the same signature settings in Mail

I am completely puzzled by this one. I have two users on separate macbook pro's using OSX Mavericks Apple Mail. Whenever one user changes their signature, it changes the other users signature. The mail server is Kerio Connect. The only workaround is to have two signatures and then each user picks their own signature as the default. Any ideas, anybody?

Both users are signed in to the same iCloud account, and both have activated "Documents & Data" synchronization.

Signature in Apple Mail

I've added a signature to Apple Mail preferences that has a .jpeg and the option to add it at the bottom of an outgoing mail. The signature works OK with a text email, but when the email itself contains graphics, or an attachment, the signature reverts to the beginning of the message. How do I standardize the signature to always appear at the bottom in emails?
Thanks.

I would have to test this, but I suspect that in the menu under Edit, you have selected to insert attachments at the end of messages. This is a good option, but may impact differently with a Signature. The option for the Signature is only in reference to whether above Quoted Text, or Not.
I doubt it has to do with whether using RTF vs Plain Text, but will test as time allows.
Ernie
Message was edited by: Ernie Stamper

Signatures in outgoing mail in Webclient

hi all,
how to add signatures in outgoing mails in IC webclient.We are working on CRM5.0
i could found signature configuration in Winclient but not in webclient.
were is this configuration done.
Regards
Ramesh

Hi Ramesh,
If you need automatic insertion, one of the options is to use ERMS functionality.
If you do not want to use ERMS, you need to modify your code, considering what email is currently open.
In ICWC email profile you need to add line (lines) like this:
<Parameter id="Response" value="Signature"/>
value is the real name of mailform(s), after that it appears in responses selection box.
Hope this helps.
Regards,
Gervase

How can I embed an html signature in my mail

how can I embed an html signature in my mail signatures? I have done it easy with older operating systems, but have no idea with the 10.8.2. Following the olds steps don't work...can't "save as" in the library...that folder isn't even an option

http://code.coneybeare.net/how-to-make-and-html-signature-in-apple-mail

This is regarding CBMA in SAP PI 7.3.1. I have set up the alert mail using default java mail client.I do receive the alerts via mail. But my requirement is to direct all the mails to Business workplace inbox in ECC.

This is regarding CBMA in single stack SAP PI 7.3.1. I have set up the alert mail using default java mail client.I do receive the alerts via mail. But my requirement is to direct all the alert mails to Business workplace inbox in ECC.
So I need to set up PI to redirect mails to ECC Business workplace user inbox (sbwp). From here rules are set up & routed per distribution list.
Please guide me how I can achieve this requirement.

Hi,
yes, it is a little bit different. This is the issue.....
But I am not sure if your links will help:
1) /people/william.li/blog/2008/02/13/sap-pi-71-mapping-enhancements-series-using-graphical-variable
is about a different solution. I do not need to count the number of lines of the source message.
And the second variable is about concat line by line from unbound node to unbound node.
My issue is:
Souce:
Message line (0...unbound) ! ! ! ! ! ! ! !
.    ResultLine   (1..1)
Mapping:
=>   ResultLine1
       ResultLine2
       ResultLine........          => into UDF to an element (1..1) in one mapping operation.
So that all "ResultLine"s are included.
The result is explained in the given link for Mail attachment with UDF.
So I am not sure how to use this thread for my issue.
In the comments of that blog Christoph Gerber writes that the new variable feature can only handle single values.
So it is not suitable for my purposes as I have a list of values here that needs to be moved into the target message field.
2) http://wiki.sdn.sap.com/wiki/display/Java/UsingEditJavaSectioninMessageMapping
shows where to find the button "Java section" which is not available here in 7.1
3) /people/sap.user72/blog/2005/10/01/xi-new-features-in-sp14
too is about the nice little button for Java Section that is no longer existing on PI 7.1 screen for mappings.
So my issue is: How to replace the Java section function with global variables in PI 7.1?
Best regards
Dirk

I am unable to Send E-mail via Default mail app in my iphone. IOS7, i have account of icloud, Gmail, Microsoft all the account are well added, i can recieve e-mails but the massage i send is never sent

I am unable to Send E-mail via Default mail app in my iphone. IOS7, i have account of icloud, Gmail, Microsoft all the account are well added, i can recieve e-mails but the massage i send is never sent

Turns out this was a simple set up error for me, although i'd set up mobile me to sync my e mails I had never set up my outgoing message server. Therefore, if I received a message from me.com I could reply no problem, however if the message came from aol.com I couldn't reply.

I have just upgraded to Mountain Lion and my signatures for my Mail is not showing up. I have the signatures inthe preference panes and selected for the email address, but when I make a new message, the signature shows as none and doesn't give me a choice

I have just upgraded to Mountain Lion and my signatures for my Mail are not showing up. I have the signatures inthe preference panes and selected for the email address, but when I make a new message, the signature shows as none and doesn't give me a choice. Yesterday, the signatures were stacking instead of switching to the one I wanted to choose.

I had this and fixed it.
I had upgraded to Mountain Lion and my signatures in Mail were fine. But then about a week later, I got a new computer and used Migration Assistant to copy my stuff to the new machine. Upon opening Mail, I had all the correct Signature information in the Preferences>Signatures window, but nothing worked.
After lots of hunting, I found the Signature Folder. It's in:
Yourusername>Library>Mail>V2>MailData>Signatures
Looking at my previous setup (which works) I saw in that folder two types of files: .webarchive and .siganture
Looking in my new machine's Signature folder, I saw only the .webarchive folders, not the .signature folders
Since this was literally a clone of my previous setup to a new machine, here's what I did:
1. Quit Mail
2. In Problem machine, go to
Yourusername>Library>Mail>V2>MailData>Signatures
3. Move the Signatures folder someplace safe, but out of the MailData folder
4. Get the Signatures Folder from the working install (like a backup) and copy it to the MailData folder on the problematic machine
5. Start Mail on the problem machine
This worked for me. I don't know why Migration Assistant didn't copy the full signature folder, but this fixed it. It worked perfectly partly because I had just backed up with Carbon Copy Cloner and the very next day set up the new machine. I don't know where Lion or earlier versions of mail stored signatures, but the absence of the .signature filetype seems to be the problem.
Hope this helps

How do I set apple mail to default to firefox?

Before switching from Safari to Firefox, links in apple mail (v1.3.11) e-mails would default to Safari for opening. After changing to Firefox as my preferred browser, now apple mail defaults to IE 5.2 to open links in e-mails. I can't find anything in apple mail to set a default browser to open links, nor can I find anything in Firefox to set a default e-mail app.
Any assistance will be greatly appreciated!
Thanks!

Open Safari, select Preferences from the Safari menu, click on the General icon in the toolbar, set the default browser to Firefox in the drop down menu, quit Safari.

How do I customize my signature in iCloud mail?

How can I customize my signature in iCloud mail?

See my repaly in this topic: customize signature iCloud email. This is for sending from the Mail application.
OT

Signature in Mac Mail keeps disappearing

I have to keep pasting the same signature in every e-mail, it will not retain my customer signature after the mail application has been closed. Couldn't find much info on this online, does anyone have any ideas?

I have the exact same problem. The image in the signature keeps disappearing. I can speculate that closing the mail app causes it to "forget" the image whilst leaving an empty Bo's in its place.
I'm using iOS 7 on iPad air.
Apple: PLEASE HELP this should not be.!

Addon Installer - Wrong Signature

Hello Experts,
I create an Addon for my company and the installer at the end of installation a error message tells me: Wrong Signature...
SAP Version: 8.82 PL11
Visual Studio: 2010
B1DE
I created a installer wiht B1DE and the ARD with the tool that is within the SAP DVD
I also try to create with INNO SETUP but the problem there sometimes its the last call to EndInstal gave an error.
Please help me ...

Hi Cristian,
When you use B1DE, the ARD is automatically generated, you dont need to generate 'ard' manually.
Check Creating and Registering Add-on on SAP B1 on how to generate via B1DE
When the ARD tools generate the 'ard' file, it get a signature from the .exe installer file.
you will get the message if the .exe installer file is not the same file you used to generate the 'ard' file.
Regards
Edy

Wrong signature inserted by Mail by default

Similar Messages

Maybe you are looking for