Wrong status in protocoll of SLFN and SDCR

Hello developers,
when i change the status by executiong an action in SLFN or SDCR the protocol is filled with a wrong status text.
For example:
status "in process" --> status "approved"
In the protocol you can find the technical key for the new status (E0009) or a wrong text "to be approved".
Do you have an idea to solve this problem?
Best regards,
Jens

FYI
The problem were missing datasets in the table TSOCM_STAT_PROP.
Regards,
Jens

Similar Messages

I am trying to print redplum coupons and I can't, help. I have updated java, adobe flash, and made sure my printer was set on default. I am not sure what I am doing wrong. I have contacted redplum and no one will help.

I am trying to print redplum coupons and I can't, help. I have updated java, adobe flash, and made sure my printer was set on default. I am not sure what I am doing wrong. I have contacted redplum and no one will help.

No Apple response??? Redplum/Valassis will not help either. I searched, using the cups error message and though it is Unbuntu, same error so maybe useful...only problem: details would not display unless I join Unbuntu forum. What a pain to do anything with my Mac or find any help. I honestly regret buying this buggy OS.
Anyway, here is what I found, FYI:
http://ubuntuforums.org/showthread.php?t=483415
As the old saying goes: when in doubt, consult the manual. The problem appears to be that I added the printer using the KDE Add Printer Wizard. It was automatically given a "socket" URI instead of an "lpd" one. When I:
- altered the printer settings at http://localhost:631 (the CUPS admin page) as instructed in the manual for the printer, and
- copied the PPD file into a second place on the hard drive (as instructed on ubunutuforums, see the link above)
..everything started working.
It's still slower than windows, but I can live with that
Probably a simple fix. Change the socket I.P. to match the printer I.P. like this:
socket://192.168.1.86:9100. The thing I'm concerned with using socket:// is that AFAIK the printer I.P. must not change. In my case I'm able to assign a static I.P. address to the printer but it's something to consider.
I found that the only thing I needed to do was change socket to lpd (and remove :9100 off the end as well). See Solving Ubuntu printer broken pipe problem (DocuPrint C525A) . BTW thanks for steering me in the right direction - very grateful.
Solving Ubuntu printer “broken pipe” problem (DocuPrint C525A)
Posted on November 25, 2008
Are you having a problem with your printer under the latest versions of Ubuntu (perhaps it worked under an older version)? Are you able to print short documents, but not longer, or more graphics-intensive, documents? (e.g. the unfortunate people at http://ubuntuforums.org/showthread.php?t=625493). Do they sit there as Processing for ages and then switch to Held? If you have the same problem I had the solution I tried may work for you too. Firstly, check your cups error log:
sudo gedit /var/log/cups/error_log
If you see anything like the following, the solution may be simple:
[Job 201] Unable to write print data: Broken pipe
PID 13359 (/usr/lib/cups/backend/socket) stopped with status 1!
System > Administration > Printing and right click on your printer, selecting Properties. Settings > Device URI
If you see something like socket://your_printer_ip_address:9100 just change socket to lpd and remove the :9100 off the end. Then click on apply.
Apparently lpd is a more modern protocol which works with most printers whereas socket is more raw (and potentially faster but riskier in a network situation). Somewhere along the line, the default Ubuntu/Gnome setup for networked printers shifted from lpd to socket. Some primitive printers will have benefited whereas a larger number of more modern printers will have suffered.
Please correct me if I am wrong (which is highly possible) but the underlying problem could be that socket may make the printer wait a long time for a large file to be processed ready for printing. Some printers, such as the Fuji Xerox DocuPrint C525A, may drop the socket if things take too long to start coming through.
Changing timeout settings might work but lpd is better than socket so it is the preferred solution in any case.
If this works for you, please leave a comment to let others know (ideally with a description of the printer and Ubuntu version). Printer may be relevant if it doesn’t support the direct stream protocol properly. NB I may take a while to let your comment through because of the volume of spam. Sorry about that.
Finally, thanks to sphilli8 for the steer in the right direction at http://ubuntuforums.org/showthread.php?p=6245626.
http://ubuntuforums.org/showthread.php?t=483415

'Idoc has wrong status'

Hi SDN,
Good morning to all of you. I came infrom of you with a small quaery related to IDOC. My query is sales order is going to be created via IDOCs (Which came from XI) through FM IDOC_INPUT_ORDERS. While creating the SO we are generating the mails to users if any errors will be encountered, but here every thing is working fine and some times it is generating mail with the message 'Idoc has wrong status' for successful also. Not for all only for few sucessfull SO's it is generating mail. Please suggest me any configuration i need to check or any thing else. Please suggest me....Appriciate your valuable suggestions......Waiting for your valuable reposnse.....
Regards,
Kumar

Hi Santosh,
Thanks for your immediate response. It is giving me status 53.
Regards,
Kumar

Search Complaints: wrong Statuses are displayed

Hello Experts.
I am working with SAP CRM 7.0 and I have an issue when it comes to searching for Complaints.
When I search for all Complaints, I see statuses 'open', 'completed', etc...but I do not see my statuses 'pending', 'concluded' and 'responded to customer'! (the other fields are ok, such as description, sold-to-party, priority, transaction type...the problem is just with field 'status', which brings the wrong statuses).
In other words, I have my own User Status profile customized, with three different statuses: Pending, Concluded and Responded to Customer. However when I search for my Complaints I cannot view my statuses. Other statues are shown instead.
Any ideas on how to solve this?
<< Moderator message - Please do not offer points >>
Thanks a lot in adavance.
Luis.
Edited by: Rob Burbank on Nov 19, 2010 5:03 PM

Hello dear Mittal,
I have found out a way to solve this!
The problem is that some fields are hidden in the configuration of the Design Layer. (spro - crm - ui framework - ui framework definition - design layer - copy sap design objects)...if you see object type BT120_CPL you will see that the design object status is hidden.
There is a configuration to deactivate hiding of fields: spro - crm - ui framework - ui framework definition - design layer - deactivate hiding of fields)...so now, everything in the attributes is available, either in the 'display' or 'shown', and I can move the fields...user status now shows as well in the 'display'!
Thanks for your help...
Luis.

User status profiles for work orders and sub-orders

Hi Experts,
I have the following question regarding status profiles for SAP PM work orders (but I guess it relates to all user status profiles).
Customizing
A status profile is defined for order type "PM_A", which contains an authorization key "OP" for certain user states (to be set by the ordering party)
Situation
The ordering party A creates an order of type PM_A for contractor B, and B then creates a sub-order of type PM_A for contractor C
Problem
- If I assign the authorization key "OP" only to roles of party A, then party B can't set the user states reserved for the ordering party (correct for the order A->B, but not for the sub-order B->C)
- If I assign the authorization key "OP" to roles of party A and party B, then B could set certain user states reserved for the ordering party in the order A->B, which is also wrong
Question
Is there a way to restrict sub-orders differently than "non-sub-orders", or do I have to create a "sub-order order-type" for each order type, in order to assign them different status profiles and authorization keys?
Thanks a lot!

hi
since you have 3 roles to be assigned to the same order type with different authorization ,it is better you create an seperate order type for sub order and assign the user status with authorization for B and C
regards
thyagarajan

VM2.2 manager page shows wrong status "Shutting down" for VM Guest

Hi,
VM manager page shows wrong status "Shutting down" for VM guest, I can very much connect to console and see it is up and running.
It happened when trying to shutdown VM guest manually but in parallel VM server got rebooted automatically.
Any information on How to correct the status in VM manager page?
Thank you.

I found below this solution on http://download.oracle.com/docs/cd/E15458_01/doc.22/e15441/appendix_e.htm#BHBCIAJB
To solve this problem, change the status manually as follows:
1.Make sure that the virtual machine in the target server has been shut down. Use xm list or virsh list to check the virtual machine name and ID.
2.If the virtual machine is running, use xm shutdown vm_id or virsh shutdown vm_id to shut it down, where vm_id refers to the virtual machine name or ID.
3.Use xm list or virsh list to check if the virtual machine has been shut down. If it is still running, use xm destroy vm_id, or virsh destroy vm_id to shut it down.
4.Log in as oracle (or root first, then su - oracle) to the computer where Oracle VM Manager is installed, and run the following commands to change the virtual machine status to Powered off in the Oracle XE database:
export ORACLE_HOME='/usr/lib/oracle/xe/app/oracle/product/10.2.0/server'
export ORACLE_SID=XE
$ORACLE_HOME/bin/sqlplus / as sysdba
SQL> update ovs.ovs_vm_img t set t.status='Powered Off' where t.img_name like 'vm_name';
SQL> commit;
SQL> quit
vm_name refers to the virtual machine name.
5.Retry your operation, or delete the virtual machine directly.

PCR "Status overview" showing wrong status

Hi,
We are implemeting Personnel Change Requests using Adobe forms. Our approval processes are working fine. But the status overview link in the "Personnel Change Request" tab shows wrong data. It shows the status as "Open/For Approval" for all PCR's submitted irrespective of the actual status. When i check in Started workflows from Txn:SBWP in R/3 i find that a few of these workflows have actually completed.
Is there any configuration that is to be done to display the correct status? Any inputs on this would be of great help.
Thanks,
Prasath N

Hi Raja,
Thanks a lot for your inputs. Finally i found the issue. I have not set the system status using the task TS50000049 and hence the system the notification remained in "Approval required" status. I was under the impression that this status is set automatically once the approval is completed. Initially when i started the development i had assumed that this task was also used to help in updating the data along with TS50000058. Since we are updating the data in background using certain function modules and BDC's i had removed this step in my custom WF.
I have solved the issue now but still there are some of the questions as given below. Please clarify these if you have any idea on this.
1. There are some hardcoded values like QN44, QN55, PMM4 that are passed to the business transaction. What are these values?
2. How is the system deciding the statuses on these values? Is there a place or table where these business transactions are linked to the Approval texts? 
3. I searched through table TJ01T and found list of business transactions for Notification but i just get an error (in WF log) if i try to use them!!!
Thanks,
Prasath N

Wrongly captured in our cenvat invoice and RG-23D Register

Hi Users,
I am facing a problem in CIN- where Excise details are wrongly captured in our cenvat invoice and RG-23D Register can anyone guide me the possibilities of errors, ASAP Please............
Tahnks & Regards
Siva

I have already done that. Paking indicator has also been maintained in the J_1IRG1 as well. I have executed the note as well. Its not that the values are not flowing. It is
for instance
Opening Balance     Quantity Manufactured         TOTAL     REMOVALS
                                                         Quantity     Value
0                                  100                    0     0     0
0                                  100                    0     0     0
0                                  100                    0     0     0
0                                    0                    0     10     0
0                                    0                    0     10     0
If you see above the opening balance in the second line item should be 100 and third should be 200...
Also the removals qty are reflected ut not value. Pls explain. The problem kin the closing balances is of the same type.
regds
Jude
Edited by: jude xavier on Jun 4, 2008 2:51 PM
Edited by: jude xavier on Jun 4, 2008 2:56 PM

HT2513 On iCal this year the date of shrove tuseday is showing on Tuesday 13 of February witch for a start is wrong coz it's a Thursday and wrong because its meant to be in march

On iCal this year the date of shrove tuseday is showing on Tuesday 13 of February witch for a start is wrong coz it's a Thursday and wrong because its meant to be in march

kaeandcolesmon,
If you open the recovery drive (partition) it should only have a single folder (Recovery).
To make sure that your not saving restore points to that drive.
See:
Start, Control Panel, System, System Protection tab. Make sure the D drive partition is set to OFF so that it does not save there.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Status 51 material document data and po data do not match(vendor)

i am using we19 to try an inbound idoc mbgmcr(receipt for po)
i put in gm_code 01
movement indicator B(goods receipt for po)
vendor 3815
PO 4500015241
PO Order Item 00030
Movement type 101
qty in unit of entry 1
iso code unit of measurement pc
on the po screen i see the po item and qty to be delivered is 75
when i run the inbound idoc i get
status 51 material document data and po data do not match(vendor) but as i say on the po inquiry screen i see the po vendor item with 75 to be delivered
what am i missing????????????????

thank you
i put in the leading zeros and got rid of that problem
now i am getting status 51
posting only possible in 2004/07 and 2004/06
but in the posting date i use 07/02/2004 i have tried several dates in the period but get the same error
any ideas?
thanks you

When I plug in apple tv the status light just blinks amber and nothing appears on the screen

When I plug in my apple tv (first gen) the status light just blinks amber and nothing appears on the screen. The status light never turns white and won't stops blinking amber. I've tried to over ride this with the remote, resetting it and trying to revert it to the factory settings. Is there a way to wake it up or is it a lost cause?

Welcome to the Apple Community.
The system looks like it's unable to start up, this could be software but more likely hardware, either way unless it will start up there is nothing a user can do to resolve this.

When i try to download an update the dropdown automatically inserts my apple id which is wrong. It's in gray and will not allow me to type in a correct id. How do I stop / delete the automatic insertion of the id?

When i try to download an update from the appstore the dropdown menju automatically inserts my apple id (which is wrong). It's in gray and will not allow me to type in the correct id. How do i stop the auto insert so that i can enter the correct id?

the original apple id was entered incorrectly. Apple says it must be a email address. My email address is correct but the letter ( t ) somehow got added to the (.com) so that when i try to enter my id it is automaticly loaded with the email address the ends ( .comt ) . According to Apple this is not a "legal" email id. But it appears on my dropdown in gray and i cannot alter it or delete it, thus preventing me from downloading software updates.

Ive just signed up for the adobe photoshop pack, i use a mac, when i click download, nothing is happening.. Am I doing something wrong?? When I try and open the software I already had from trial it says its expired, or i need to use a serial number... H

Ive just signed up for the adobe photoshop pack, i use a mac, when i click download, nothing is happening.. Am I doing something wrong?? When I try and open the software I already had from trial it says its expired, or i need to use a serial number... HELP Anyone else experienced this?

If there is an option to "license this software", and it takes you to a sign-in page with username and password (not a serial number) - then just go ahead and sign in.
If it insists on a serial number you need to uninstall the trial. Then try to download again.

After my friend locked me out of my iPhone with too many wrong passwords I restored my iPhone and now it is showing that picture of a cable leading towards itunes and itunes says the sim is not supported but it is the original sim. How do I fix this?

After my friend locked me out of my iPhone with too many wrong password attempts I restored my iPhone via recovery mode and now it is showing that picture of a cable leading towards itunes, and itunes says the sim is not supported but it is the original sim. How do I fix this?

Something went wrong with the update, this can and does happen with every version of iOS.
There is nothing wrong with the update.
Simply restore the device via iTunes on the computer.
If iTunes is stating it will take hours to update, that indicates an extremely slow Internet connection and is likely the reason the OTA update failed.

Hi, my daughter wrote wrong paswords in my ipod touch and it is blocked. It says it needs to be connected to itunes, but once its there it says the ipod is blocked with a passcode..the ipod is just blocked. what can I do?

hi, my daughter wrote wrong paswords in my ipod touch and it is blocked. It says it needs to be connected to itunes, but once its there it says the ipod is blocked with a passcode..the ipod is just blocked. what can I do?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Wrong status in protocoll of SLFN and SDCR

Similar Messages

Maybe you are looking for