Wrong Total on static table

In criteria tab I have one dimension of Departments and one column that is a formula of two measures (measure1/measure2)
The result is:
Department --------MEASURE1/MEASURE2
Dept1 --------------------0,52
Dept2 --------------------0,52
Dept3 --------------------0,52
Dept4---------------------0,52
Grand Total-------------0,52
Grand total it have to be the sum of all departments...2,08
Measure1 on administration program I can see that is DOUBLE and Measure2 is INT. I change it with another type...but doesn't works...
Regards!

Hi,
Navigate to Edit Column formula box from 'Measure2' column in criteria page and change the aggregation rule to sum. And if you are viewing results in Pivot view change the aggregation rule there also. If none of this works, see the backend SQl query and try running the report keeping only Measure2.
Thanks
Swami
Edited by: Swamkrishna on Oct 2, 2009 1:53 PM

Similar Messages

  • An error cause a Grand total on static table

    I have a static table report and when I go to dashboard page I see this error:
    View Display Error
    Odbc driver returned an error (SQLExecDirectW).
    Error Details
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 46036] Internal Assertion: Condition listNode.GetGroupBy() == NULL, file .\Src\SQOIGeneratorBuiltIn.cpp, line 1496. (HY000)
    If I delete grand total on static table...works fine..
    Anybody helps me?
    Thanks!

    Set the aggregation for the metrics.. Either in RPD or in report.
    In report, Open fx of column and you will aggregation drop down at bottom of pop up window. Set that to proper aggregation, and try grand totals.
    - Madan

  • Grand total "before" on static table

    I can do grand total "before" on pivot table...but I need to do in static table. Is possible??
    With pivot table I have option "after", "before" but in static table I don't have any option...
    Thanks!

    Set the aggregation for the metrics.. Either in RPD or in report.
    In report, Open fx of column and you will aggregation drop down at bottom of pop up window. Set that to proper aggregation, and try grand totals.
    - Madan

  • Show Data as percent of Column with static table

    Hello,
    I have a problem calculating a % in a table. I have two columns in criteria tab:
    Departments and measure
    I need an extra column that calc % of total departments for each department. I know that I can do it with pivot table creating a new column and put: Show Data --> as Percent of --> Column but I need to do with static table.
    Is possible to do it??
    Thanks!!!

    Alex,
    You could try the following example here :
    http://www.biconsultinggroup.com/knowledgebase.asp?CategoryID=198&SubCategoryID=364
    using sum( measure by dimension attribute)
    This should give you access to the grand total in the report as a column, from which you can derive % of.
    HTH, if correct please mark answered / award points as you see fit to do so!!
    Alastair

  • Need to find total no fo  tables/index/m.views in my database

    Hello Everyone ;
    How can i find total no fo  tables/index/m.views in my database ?
    when i  google  i have seen  following  command ;
    SQL> Select count(1) from user_tables where table_name not like '%$%' /
      COUNT(1)
             but i dont understand  what  '%$%'  indicates ?
    Thanks all ;

    Hello Everyone ;
    How can i find total no fo  tables/index/m.views in my database ?
    when i  google  i have seen  following  command ;
    SQL> Select count(1) from user_tables where table_name not like '%$%' /
      COUNT(1)
             but i dont understand  what  '%$%'  indicates ?
    Thanks all ;
    consider to simply Read The Fine Manual YOURSELF!
    Oracle Database Search Results: like

  • Adding Sum Totals from Multiple Tables in A single Document

    Hello All,
    I'm having trouble adding sum totals from multiple tables I've created in a Pages 09 doc. I putting together a spreadsheet for cost projections for a house remodel. I created tables for each room of the house. At the bottom of the document I'd like to have another table that takes the totals from each individual room and adds them up. Problem appears to be that each table has the same x/y axis labels so row and column numbers/letters are repeated so the final table can't quantify thing correctly.
    Any easy solutions? I can't find anything that's helped in my search efforts.
    Thanks,
    Josefis

    Jerry,
    Thanks for the feedback. I thought that might be the case. And you were correct to assume I was more comfortable in Pages. I'm halfway through converting everything to numbers. In the end it will work great too. Just some different formatting/design choices to be made as numbers doesn't appear to be as versatile in the same way pages is with design. So far it looks pretty good though.
    Thanks again,
    Josefis

  • Wrong picture in AFRU table for scrap...

    Hi Experts,
    When I confirming co11 and entering scrap, it show wrong picture in AFRU table.
    e.g. : For first time i entered 2 scrap.
            Seconf time i entered  1 scrap.
    But in table it shows 5 scrap.
    Which is the right table ? How to finf scrap qty for same prod. order. ?
    Yusuf
    null

    no answer. Closed.

  • How to implement static tables in XI Mapping

    I need to use a static table for lookup purposes in an XI mapping. I am using Java Mapping.
    -- This is a small  5 columns - 264 rows table, which is unlikely to be changed.

    Hi,
    U can maintained table in Xi and use the RFC lookup from graphical mapping this will avoid use of graphical mapping.
    Refer the below weblog for more infor:
    •     RFC lookup using JCO (without communication channel)
          /people/sravya.talanki2/blog/2005/12/21/use-this-crazy-piece-for-any-rfc-mapping-lookups
    •     RFC lookup with communication channel.
                     /people/alessandro.guarneri/blog/2006/03/27/sap-xi-lookup-api-the-killer
    Thnx
    Chirag

  • % of calculation in GRAND TOTAL in PIVOT TABLE

    Hi Gurus,
    I have a requirement to calculate the percentage based on the grand total in pivot table,but in row wise i am getting the percentage while in grand total level i am not getting correct values.I have tried with all the options like:average,Sum,Default,Max,Min,count etc and also with the percent of row,column,parent column etc.
    Please give me a solution for this ASAP.
    view of my table is
    Previous Value||Present Value||change between Pres & Prev||% of change(((pres - prev)/pres)*100)
    10||20||10||50%
    00||01||01||100%
    10||05||-05||-50%
    here i should get values in grand total like
    20||26||06||23%
    but i am getting values when giving sum for %of calc in measures values
    20||26||06||100%
    if i give avg for %of calc in measures values then i am geting
    20||26||06||33%
    how to solve this prob.Can any one give sol plzzzzzzzz
    Thanks,
    Naveen

    Hi,
    Refer : http://www.skurabigroup.com/blog/?p=579
    Regards,
    Srikanth

  • Static Tables Creation In oracle & Diff Between Static table ,Dynamic table

    Static Tables Creation In oracle & Diff Between Static table ,Dynamic table

    972471 wrote:
    Static Tables Creation In oracle & Diff Between Static table ,Dynamic tableAll tables in a well designed application should be static tables.
    Whilst it's possible to execute dynamic code and therefore create tables dynamically at run time, this is considered poor design and should be avoided in 99.99% of cases... though for some reason some people still think they need to do this, and it's never really justified.
    So what issue are you facing that you need to even bother considering dynamic tables?

  • Total in advance table region

    hi all,
    i have one advance table region with total.
    in advance table region displays records(ex my advance table region displays 5 records).
    every number field display the total(this total calculate 5 records data)
    ex:
    1000
    2000
    3000
    4000
    5000
    total 15000
    my page work like above senario.
    but my client requirement is,in 5 records he select any two records and display the 2 records total.
    how to achive this
    plz help me its very urgent...
    Thanks
    Edited by: its urgent on Apr 13, 2012 4:38 AM

    Hi Gurus,
    Please help me. its very urgent
    Thanks

  • Remove the word "Total" in Row Totals in Pivot Tables

    Hi,
    Is it possible to remove the word "Total" that appears in Row Totals in Pivot Tables?
    Eg. If there are 2 Dimension Columns -- Year and Month .... and if we do row totals on Year
    The total appears as *'2008 Total'* or *'2009 Total'* etc. i.e. Each of the Values is followed by the word 'Total'.
    However, i would like the totals to display only the values '2008' or '2009' without the word 'Total'.
    Is this possible in OBIEE 11.1.1.5.0 ?
    Thanks,
    Ab

    Hi ,
    Goto Total -> Format label and type in @.This will remove the word"Total". I have tested this in 10g, try this and let me know if it works in 11g.
    Rgds,
    Dpka

  • Chart Comb with  Static Table.

    Hello everyone!
    I have a graph made of bars and one static table below (with a column sorting). I need that the graph actualize automatically when I click on the table to see the next 10 items in the column sorting button.
    Thank you for your help!
    Edited by: Alex17 on 16-sep-2009 6:46

    If I understand you correctly I don't think you understand how a compound layout works in the this case. The chart will show the full record set for the report, even if the table below it only shows 25 records per page, the chart still reflects the entire report. If for some reason you only want the chart to reflect only the visable table records, which makes no sense to me BTW, I'm pretty sure it will be very complex to implement (maybe something envolving two seperate reports in one dashboard?). If that's what you want, maybe one of the experts here could help you.

  • Static table in normal abap function module

    Hi All,
    I have written a code which calls multiple function module multiple times with parameters. However in code review I got comments: 'Please declare a static table to maintain the values of x/y/z.... this can be used when the FM is called evry time for the same values.'
    I have never implemented this functionality. I guess in class and object programming we have functionality to put parameters as static. Can anybody put more light on this? An example would help a lot.
    Thanks in advance.
    Regards,
    Jignesh

    Structured Static Data Object Definitions
    - STATICS: BEGIN OF struc,
                   END   OF struc.
    Structured Static Internal Table Definition
    - STATICS itab TYPE tabtype [WITH HEADER LINE].
    - STATICS itab TYPE tabkind OF linetype
                 [WITH [UNIQUE|NON-UNIQUE] keydef]
                 [INITIAL SIZE n] [WITH HEADER LINE].
    - STATICS itab LIKE tabkind OF lineobj
                [WITH [UNIQUE|NON-UNIQUE] keydef]
                [INITIAL SIZE n] [WITH HEADER LINE].
    - STATICS itab TYPE linetype OCCURS n [WITH HEADER LINE].
    - STATICS itab LIKE lineobj  OCCURS n [WITH HEADER LINE].
    - STATICS: BEGIN OF itab OCCURS n,
             END   OF itab [VALID BETWEEN f1 AND f2].
    STATICS itab TYPE RANGE OF type.
    STATICS itab LIKE RANGE OF f
    REGARDS
    SHIBA DUTTA

  • How do I total across multiple Tables? Help!

    how do I total across multiple Tables? Help!
    I feel like a complete noob.

    Hi Marc,
    There is no function explicitly for that sort of array calculation in Numbers.
    My favorite way is to use a list of Table Names and the INDIRECT(ADDRESS) function combination to produce a SUM across tables. I'm making the assumption that you want to do something like adding up all the values in a particular cell of multiple tables.  For example "give me the total of all the A1 cells in tables T1, T2, T3 and T4".  For this I would use the formula:
    =INDIRECT(ADDRESS(1,1,1,,A))
    to grab the cell contents of the table names mentioned in column A of a summary table.  Once you have them collected in your summary table, add them up.
    Here's a screen shot...
    Hope that gives you an idea for approaching this problem.
    Jerry

Maybe you are looking for