WRT300N V2 pptp error

Hi.
I can't correct setup WRT300N V.2 for connect to ISP VPN Server.
I obtain IP address from ISP by DHCP (some think like 10.15.28.xxx)
ISP VPN IP - is 10.15.0.x
How correct setup this parameter in WTR300N.
I can't how setup DHCP address if I select "PPTP" in router.
And I can't see field for IP address for VPN server.
Any Idea?
BR,
Yury Nikulin

Hi… If your ISP provides you a connection through PPTP then you should have a Static IP and not a DHCP lease for this connection.

Similar Messages

Repeat com.apple.ppp.pptp errors in logs

Got the following errors flooding my logs. VPN issue? but it's not on. Read in the forums that it could be MobileMe Back to my Mac problems, turned it off on Airport. Launched Lingon noticed that there are multiple entries of com.apple.ppp.pptp is that right ? Any ideas ??? :
4/07/10 11:45:13 AM com.apple.launchd[1] (com.apple.ppp.pptp[70091]) Exited with exit code: 2
4/07/10 11:45:13 AM com.apple.launchd[1] (com.apple.ppp.pptp) Throttling respawn: Will start in 10 seconds
4/07/10 11:45:13 AM com.apple.launchd[1] (com.apple.ppp.l2tp[70092]) Exited with exit code: 2
4/07/10 11:45:13 AM com.apple.launchd[1] (com.apple.ppp.l2tp) Throttling respawn: Will start in 10 seconds
4/07/10 11:45:23 AM com.apple.ppp.pptp[70105] 2010-07-04 11:45:23 NZST Server 'com.apple.ppp.pptp' starting...
4/07/10 11:45:23 AM com.apple.ppp.l2tp[70106] 2010-07-04 11:45:23 NZST Server 'com.apple.ppp.l2tp' starting...
4/07/10 11:45:23 AM com.apple.launchd[1] (com.apple.ppp.pptp[70105]) Exited with exit code: 2
4/07/10 11:45:23 AM com.apple.launchd[1] (com.apple.ppp.pptp) Throttling respawn: Will start in 10 seconds
4/07/10 11:45:23 AM com.apple.launchd[1] (com.apple.ppp.l2tp[70106]) Exited with exit code: 2
4/07/10 11:45:23 AM com.apple.launchd[1] (com.apple.ppp.l2tp) Throttling respawn: Will start in 10 seconds
4/07/10 11:45:33 AM com.apple.ppp.l2tp[70113] 2010-07-04 11:45:33 NZST Server 'com.apple.ppp.l2tp' starting...
4/07/10 11:45:33 AM com.apple.ppp.pptp[70112] 2010-07-04 11:45:33 NZST Server 'com.apple.ppp.pptp' starting...
4/07/10 11:45:33 AM com.apple.launchd[1] (com.apple.ppp.pptp[70112]) Exited with exit code: 2
4/07/10 11:45:33 AM com.apple.launchd[1] (com.apple.ppp.pptp) Throttling respawn: Will start in 10 seconds
4/07/10 11:45:33 AM com.apple.launchd[1] (com.apple.ppp.l2tp[70113]) Exited with exit code: 2
4/07/10 11:45:33 AM com.apple.launchd[1] (com.apple.ppp.l2tp) Throttling respawn: Will start in 10 seconds
4/07/10 11:45:43 AM com.apple.ppp.l2tp[70127] 2010-07-04 11:45:43 NZST Server 'com.apple.ppp.l2tp' starting...
4/07/10 11:45:43 AM com.apple.ppp.pptp[70126] 2010-07-04 11:45:43 NZST Server 'com.apple.ppp.pptp' starting...
4/07/10 11:45:43 AM com.apple.launchd[1] (com.apple.ppp.pptp[70126]) Exited with exit code: 2
4/07/10 11:45:43 AM com.apple.launchd[1] (com.apple.ppp.pptp) Throttling respawn: Will start in 10 seconds
4/07/10 11:45:43 AM com.apple.launchd[1] (com.apple.ppp.l2tp[70127]) Exited with exit code: 2
4/07/10 11:45:43 AM com.apple.launchd[1] (com.apple.ppp.l2tp) Throttling respawn: Will start in 10 seconds
4/07/10 11:45:53 AM com.apple.ppp.pptp[70162] 2010-07-04 11:45:53 NZST Server 'com.apple.ppp.pptp' starting...
4/07/10 11:45:53 AM com.apple.ppp.l2tp[70163] 2010-07-04 11:45:53 NZST Server 'com.apple.ppp.l2tp' starting...
4/07/10 11:45:53 AM com.apple.launchd[1] (com.apple.ppp.pptp[70162]) Exited with exit code: 2
4/07/10 11:45:53 AM com.apple.launchd[1] (com.apple.ppp.pptp) Throttling respawn: Will start in 10 seconds
4/07/10 11:45:53 AM com.apple.launchd[1] (com.apple.ppp.l2tp[70163]) Exited with exit code: 2
4/07/10 11:45:53 AM com.apple.launchd[1] (com.apple.ppp.l2tp) Throttling respawn: Will start in 10 seconds
4/07/10 11:46:03 AM com.apple.ppp.pptp[70164] 2010-07-04 11:46:03 NZST Server 'com.apple.ppp.pptp' starting...
4/07/10 11:46:03 AM com.apple.ppp.l2tp[70165] 2010-07-04 11:46:03 NZST Server 'com.apple.ppp.l2tp' starting...
4/07/10 11:46:03 AM com.apple.launchd[1] (com.apple.ppp.pptp[70164]) Exited with exit code: 2
4/07/10 11:46:03 AM com.apple.launchd[1] (com.apple.ppp.pptp) Throttling respawn: Will start in 10 seconds
4/07/10 11:46:03 AM com.apple.launchd[1] (com.apple.ppp.l2tp[70165]) Exited with exit code: 2
4/07/10 11:46:03 AM com.apple.launchd[1] (com.apple.ppp.l2tp) Throttling respawn: Will start in 10 seconds
4/07/10 11:46:13 AM com.apple.ppp.pptp[70185] 2010-07-04 11:46:13 NZST Server 'com.apple.ppp.pptp' starting...
4/07/10 11:46:13 AM com.apple.ppp.l2tp[70186] 2010-07-04 11:46:13 NZST Server 'com.apple.ppp.l2tp' starting...
4/07/10 11:46:13 AM com.apple.launchd[1] (com.apple.ppp.pptp[70185]) Exited with exit code: 2
4/07/10 11:46:13 AM com.apple.launchd[1] (com.apple.ppp.pptp) Throttling respawn: Will start in 10 seconds
4/07/10 11:46:13 AM com.apple.launchd[1] (com.apple.ppp.l2tp[70186]) Exited with exit code: 2
4/07/10 11:46:13 AM com.apple.launchd[1] (com.apple.ppp.l2tp) Throttling respawn: Will start in 10 seconds
4/07/10 11:46:23 AM com.apple.ppp.pptp[70213] 2010-07-04 11:46:23 NZST Server 'com.apple.ppp.pptp' starting...
4/07/10 11:46:23 AM com.apple.ppp.l2tp[70214] 2010-07-04 11:46:23 NZST Server 'com.apple.ppp.l2tp' starting...
4/07/10 11:46:23 AM com.apple.launchd[1] (com.apple.ppp.l2tp[70214]) Exited with exit code: 2
4/07/10 11:46:23 AM com.apple.launchd[1] (com.apple.ppp.l2tp) Throttling respawn: Will start in 10 seconds
4/07/10 11:46:23 AM com.apple.launchd[1] (com.apple.ppp.pptp[70213]) Exited with exit code: 2
4/07/10 11:46:23 AM com.apple.launchd[1] (com.apple.ppp.pptp) Throttling respawn: Will start in 10 seconds
4/07/10 11:46:33 AM com.apple.ppp.pptp[70226] 2010-07-04 11:46:33 NZST Server 'com.apple.ppp.pptp' starting...
4/07/10 11:46:33 AM com.apple.ppp.l2tp[70225] 2010-07-04 11:46:33 NZST Server 'com.apple.ppp.l2tp' starting...
4/07/10 11:46:33 AM com.apple.launchd[1] (com.apple.ppp.pptp[70226]) Exited with exit code: 2
4/07/10 11:46:33 AM com.apple.launchd[1] (com.apple.ppp.pptp) Throttling respawn: Will start in 10 seconds
4/07/10 11:46:33 AM com.apple.launchd[1] (com.apple.ppp.l2tp[70225]) Exited with exit code: 2
4/07/10 11:46:33 AM com.apple.launchd[1] (com.apple.ppp.l2tp) Throttling respawn: Will start in 10 seconds
4/07/10 11:46:43 AM com.apple.ppp.pptp[70250] 2010-07-04 11:46:43 NZST Server 'com.apple.ppp.pptp' starting...
4/07/10 11:46:43 AM com.apple.ppp.l2tp[70251] 2010-07-04 11:46:43 NZST Server 'com.apple.ppp.l2tp' starting...
4/07/10 11:46:43 AM com.apple.launchd[1] (com.apple.ppp.pptp[70250]) Exited with exit code: 2
4/07/10 11:46:43 AM com.apple.launchd[1] (com.apple.ppp.pptp) Throttling respawn: Will start in 10 seconds
4/07/10 11:46:43 AM com.apple.launchd[1] (com.apple.ppp.l2tp[70251]) Exited with exit code: 2
4/07/10 11:46:43 AM com.apple.launchd[1] (com.apple.ppp.l2tp) Throttling respawn: Will start in 10 seconds
4/07/10 11:46:53 AM com.apple.ppp.l2tp[70253] 2010-07-04 11:46:53 NZST Server 'com.apple.ppp.l2tp' starting...
4/07/10 11:46:53 AM com.apple.ppp.pptp[70252] 2010-07-04 11:46:53 NZST Server 'com.apple.ppp.pptp' starting...
4/07/10 11:46:53 AM com.apple.launchd[1] (com.apple.ppp.l2tp[70253]) Exited with exit code: 2
4/07/10 11:46:53 AM com.apple.launchd[1] (com.apple.ppp.l2tp) Throttling respawn: Will start in 10 seconds
4/07/10 11:46:53 AM com.apple.launchd[1] (com.apple.ppp.pptp[70252]) Exited with exit code: 2
4/07/10 11:46:53 AM com.apple.launchd[1] (com.apple.ppp.pptp) Throttling respawn: Will start in 10 seconds
4/07/10 11:47:03 AM com.apple.ppp.pptp[70255] 2010-07-04 11:47:03 NZST Server 'com.apple.ppp.pptp' starting...
4/07/10 11:47:03 AM com.apple.ppp.l2tp[70254] 2010-07-04 11:47:03 NZST Server 'com.apple.ppp.l2tp' starting...
4/07/10 11:47:03 AM com.apple.launchd[1] (com.apple.ppp.l2tp[70254]) Exited with exit code: 2
4/07/10 11:47:03 AM com.apple.launchd[1] (com.apple.ppp.l2tp) Throttling respawn: Will start in 10 seconds
4/07/10 11:47:03 AM com.apple.launchd[1] (com.apple.ppp.pptp[70255]) Exited with exit code: 2
4/07/10 11:47:03 AM com.apple.launchd[1] (com.apple.ppp.pptp) Throttling respawn: Will start in 10 seconds
4/07/10 11:47:13 AM com.apple.ppp.pptp[70286] 2010-07-04 11:47:13 NZST Server 'com.apple.ppp.pptp' starting...
4/07/10 11:47:13 AM com.apple.ppp.l2tp[70285] 2010-07-04 11:47:13 NZST Server 'com.apple.ppp.l2tp' starting...
4/07/10 11:47:13 AM com.apple.launchd[1] (com.apple.ppp.pptp[70286]) Exited with exit code: 2
4/07/10 11:47:13 AM com.apple.launchd[1] (com.apple.ppp.pptp) Throttling respawn: Will start in 10 seconds
4/07/10 11:47:13 AM com.apple.launchd[1] (com.apple.ppp.l2tp[70285]) Exited with exit code: 2
4/07/10 11:47:13 AM com.apple.launchd[1] (com.apple.ppp.l2tp) Throttling respawn: Will start in 10 seconds
4/07/10 11:47:23 AM com.apple.ppp.l2tp[70291] 2010-07-04 11:47:23 NZST Server 'com.apple.ppp.l2tp' starting...
4/07/10 11:47:23 AM com.apple.ppp.pptp[70290] 2010-07-04 11:47:23 NZST Server 'com.apple.ppp.pptp' starting...
4/07/10 11:47:23 AM com.apple.launchd[1] (com.apple.ppp.l2tp[70291]) Exited with exit code: 2
4/07/10 11:47:23 AM com.apple.launchd[1] (com.apple.ppp.l2tp) Throttling respawn: Will start in 10 seconds
4/07/10 11:47:23 AM com.apple.launchd[1] (com.apple.ppp.pptp[70290]) Exited with exit code: 2
4/07/10 11:47:23 AM com.apple.launchd[1] (com.apple.ppp.pptp) Throttling respawn: Will start in 10 seconds
4/07/10 11:47:33 AM com.apple.ppp.l2tp[70292] 2010-07-04 11:47:33 NZST Server 'com.apple.ppp.l2tp' starting...
4/07/10 11:47:33 AM com.apple.ppp.pptp[70293] 2010-07-04 11:47:33 NZST Server 'com.apple.ppp.pptp' starting...
4/07/10 11:47:33 AM com.apple.launchd[1] (com.apple.ppp.l2tp[70292]) Exited with exit code: 2
4/07/10 11:47:33 AM com.apple.launchd[1] (com.apple.ppp.l2tp) Throttling respawn: Will start in 10 seconds
4/07/10 11:47:33 AM com.apple.launchd[1] (com.apple.ppp.pptp[70293]) Exited with exit code: 2
4/07/10 11:47:33 AM com.apple.launchd[1] (com.apple.ppp.pptp) Throttling respawn: Will start in 10 seconds

I had the same message with snow leopard server, did not have vpn working.
I fixed it by setting pptp enabled, with an IP address range, in the vpn tab of server admin. vpn is still not started, but this fixed the error - i dont know what process was calling pptp, but it seems be happy now.
Jabber still has no start/stop button, needs launchctl to make it go. such is life. just the odd log message about throttling the disk, felt like doing that myself occasionally.

Pptp error messages in log-files.

Hi!
I've got internet connection from my provider via VPN. After configuring network (article Microsoft VPN client setup with pptpclient) internet works, but many error messages appears in daemon.log and messages.log like that:
Jan 2 17:21:40 localhost pptp[4510]: anon log[decaps_gre:pptp_gre.c:414]: buffering packet 1541962 (expecting 1541920, lost or reordered)
Jan 2 17:21:40 localhost pptp[4510]: anon log[decaps_gre:pptp_gre.c:414]: buffering packet 1541963 (expecting 1541920, lost or reordered)
Jan 2 17:21:40 localhost pptp[4510]: anon log[decaps_gre:pptp_gre.c:414]: buffering packet 1541964 (expecting 1541920, lost or reordered)
Jan 2 17:21:40 localhost pptp[4510]: anon log[decaps_gre:pptp_gre.c:414]: buffering packet 1541965 (expecting 1541920, lost or reordered)
Jan 2 17:21:40 localhost pptp[4510]: anon log[decaps_gre:pptp_gre.c:414]: buffering packet 1541966 (expecting 1541920, lost or reordered)
Jan 2 17:21:40 localhost pptp[4510]: anon log[decaps_gre:pptp_gre.c:414]: buffering packet 1541967 (expecting 1541920, lost or reordered)
After a few days this two log files are bigger then 2Gb. Could you please help me find out the reason of this messages?
Best regards.

Hi, Joerg. Welcome to the Discussions.
1. re: Smart Crash Reports error. "Smart Crash Reports" is an Unsanity hack. Either you installed it or it was perhaps installed by another of their hacks you have installed. In either case, that's a question for Unsanity to answer.
2. re: The SpeedTools extension you cited. Check their documentation or their Web site for instructions on uninstalling the extension. You may be able to start up in Safe Mode (which prevents third-party kernel extensions from loading), then drag it from the Macintosh HD > System > Library > Extensions folder to your desktop, then restart your Mac. However, I'd check the SpeedTools documentation first. See my "Uninstalling applications" FAQ for important advice on uninstalling software.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

WRT300N Invalid Certificate Error

I'm trying to connect to my router on a new computer. I type in the IP address and I get an error that says:
"You have received an invalid certificate. Please contact the server administrator or email correspondent and give them the following information:
Your certificate contains the same serial number as another certificate issued by the certificate authority. Please get a new certificate containing a unique serial number."
I have connected to this router before on my old computer before it died. The only thing I have done is install the LinkSys software on this new computer, could that cause this error?
Thank you for any help.

It's not the router. It's more of the settings of your browser. You need to lower down the security settings to avoid this problem. Try to go to tools->internet options->content. Clear the SSL, and delete the existing certificates there.

Installing pptp client

Hi Gurus,
I downloaded pptp client from sourceforge.net i am trying to install it on Solaris 10 x86 laptop but i get the following errors, can you please help a lost friend here:
bash-3.00# /usr/local/bin/make
gcc -o pptp pptp.o pptp_gre.o ppp_fcs.o pptp_ctrl.o dirutil.o vector.o inststr.o util.o version.o test.o pptp_quirks.o orckit_quirks.o pqueue.o pptp_callmgr.o routing.o pptp_compat.o -lutil
ld: fatal: library -lutil: not found
ld: fatal: File processing errors. No output written to pptp
collect2: ld returned 1 exit status
make: *** [pptp] Error 1
thanks in advance

Hi, thanks for reply, i tried that but now i get this error:
bash-3.00# /usr/local/bin/make
gcc -o pptp pptp.o pptp_gre.o ppp_fcs.o pptp_ctrl.o dirutil.o vector.o inststr.o util.o version.o test.o pptp_quirks.o orckit_quirks.o pqueue.o pptp_callmgr.o routing.o pptp_compat.o
Undefined first referenced
symbol in file
bind pptp_gre.o
accept pptp_callmgr.o
listen pptp_callmgr.o
gethostbyname pptp.o
socket pptp.o
getsockopt pptp_gre.o
connect pptp.o
inet_aton pptp_callmgr.o
inet_pton pptp.o
inet_ntoa pptp.o
h_errno pptp.o
ld: fatal: Symbol referencing errors. No output written to pptp
collect2: ld returned 1 exit status
make: *** [pptp] Error 1
please help!

Cannot Make PPTP VPN Connection in 10.7.4

As far as I can tell everything is setup correctly but every time I try to connect I get this message:
You were disconnected by the communication device. Try reconnecting. If the problem continues, verify your settings.
Console Log:
6/25/12 5:11:40.382 PM pppd: PPTP connection established.
6/25/12 5:11:40.443 PM pppd: Connect: ppp0 <--> socket[34:17]
6/25/12 5:11:40.447 PM pppd: PPTP error when reading socket : EOF
6/25/12 5:11:40.447 PM pppd: PPTP error when reading header : read -1, expected 12 bytes
6/25/12 5:11:40.447 PM pppd: PPTP hangup
6/25/12 5:11:40.448 PM pppd: Connection terminated.
6/25/12 5:11:40.454 PM pppd: PPTP disconnecting...
6/25/12 5:11:40.455 PM pppd: PPTP disconnected
I am trying to connect to a Linux based VPN server. I have double checked my username and password multiple times, made sure the MTU is set the same on client, server, and router, and tried turning the encryption off and on on the server and the client. Nothing has made a difference, I get the same error every time. I am able to FTP and SSH into the Linux box.
Any suggestions of other things to try would be much appreciated. I saw some threads about editing config files on my mac but this is a brand new machine that I have had for a week running an OS that is on it's fourth point release. I really should not have to muck around with config files but at this point I'm ready to try anything.

Looks like it might be a configuration error on the server's end. The VPN makes a connection and tries to read the server's configuration to create a socket for communication, but runs into a formatting error when it is passed an "End of File" character instead of a required component of the socket. Can you try connecting to another VPN server, or perhaps try an L2TP connection instead of PPTP?

Can't connect to VPN after 10.4.10 Upgrade

Please help me!
Before I upgrade to 10.4.10 I could connect to VPN.
But after the upgrade, it just "timed out". In the Console it shows:
Sep 28 12:22:57 vivivold pppd744: PPTP error when sending echo_reply : Network is unreachable\n
Sep 28 12:22:57 vivivold pppd744: MPPE disabled
And I just can't find the solution?!?!?!?!?! Anyone help? (and yes I have written the correct pass and username... )

Anyone??? please??
I try to connect to vpn (it is the correct ip and all that)
And after 59sek (1 min) it stops and says "the connection were lost because the reciever did't respond, try again"
And the console writes:
Oct 12 08:25:30 vivivold pppd[3968]: PPTP error when sending echo_reply : Network is unreachable\n
Oct 12 08:25:30 vivivold pppd[3968]: MPPE disabled
2007-10-12 08:25:30.641 SystemUIServer[131] Exception raised during posting of notification. Ignored. exception: * -[NSPlaceholderString initWithString:]: nil argument
Anybody... anything any idea at all??? PLEASE HELP ME!

10.6.4 VPN service issues

Hello, I have a OS X 10.6.4 box running the Workstation version of the software, and have installed iVPN on it to purportedly allow for it to behave as a VPN server. The iVPN software itself is apparently just a GUI for what you could do by hand with editing conf files. I have used the software to set up the VPN service and it appears to be running as a PPTP server, but upon connecting I get the following information in the log on the server:
2010-09-01 15:53:00 CDT Incoming call... Address given to client = 10.0.1.12
Wed Sep 1 15:53:00 2010 : PPTP incoming call in progress from '98.175.XXX.XXX'...
Wed Sep 1 15:53:00 2010 : PPTP connection established.
Wed Sep 1 15:53:00 2010 : using link 0
Wed Sep 1 15:53:00 2010 : Using interface ppp0
Wed Sep 1 15:53:00 2010 : Connect: ppp0 <--> socket[34:17]
Wed Sep 1 15:53:00 2010 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x22093f60> <pcomp> <accomp>]
Wed Sep 1 15:53:03 2010 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x22093f60> <pcomp> <accomp>]
Wed Sep 1 15:53:06 2010 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x22093f60> <pcomp> <accomp>]
Wed Sep 1 15:53:09 2010 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x22093f60> <pcomp> <accomp>]
Wed Sep 1 15:53:12 2010 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x22093f60> <pcomp> <accomp>]
Wed Sep 1 15:53:15 2010 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x22093f60> <pcomp> <accomp>]
Wed Sep 1 15:53:18 2010 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x22093f60> <pcomp> <accomp>]
Wed Sep 1 15:53:21 2010 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x22093f60> <pcomp> <accomp>]
Wed Sep 1 15:53:24 2010 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x22093f60> <pcomp> <accomp>]
Wed Sep 1 15:53:27 2010 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x22093f60> <pcomp> <accomp>]
Wed Sep 1 15:53:30 2010 : LCP: timeout sending Config-Requests
Wed Sep 1 15:53:30 2010 : Connection terminated.
Wed Sep 1 15:53:30 2010 : PPTP disconnecting...
Wed Sep 1 15:53:30 2010 : PPTP disconnected
2010-09-01 15:53:30 CDT --> Client with address = 10.0.1.12 has hungup
2010-09-01 15:55:11 CDT terminating on signal 15
On the machine I am connecting from, also a 10.6.4 Workstation box, I get the following in the console (note that the timestamps are different, but the content is what I see):
9/8/10 10:42:51 AM pppd[9891] pppd 2.4.2 (Apple version 412.3) started by tmitera, uid 501
9/8/10 10:42:51 AM pppd[9891] PPTP connecting to server '68.96.XXX.XXX' (68.96.XXX.XXX)...
9/8/10 10:42:51 AM pppd[9891] PPTP connection established.
9/8/10 10:42:51 AM pppd[9891] Connect: ppp0 <--> socket[34:17]
9/8/10 10:42:52 AM kernel PPTP domain init
9/8/10 10:42:54 AM pppd[9891] MS-CHAP authentication failed: Access denied
9/8/10 10:42:54 AM pppd[9891] PPTP error when reading socket : EOF
9/8/10 10:42:54 AM pppd[9891] PPTP error when reading header : read -1, expected 12 bytes
9/8/10 10:42:54 AM pppd[9891] Connection terminated.
9/8/10 10:42:54 AM pppd[9891] PPTP disconnecting...
9/8/10 10:42:54 AM pppd[9891] PPTP disconnected
Does anyone have any ideas as to what may be the culprit, or perhaps have a better alternative in getting the machine to act as a VPN server short of buying the Server version of the OS or buying some dedicated VPN hardware?

I also have a similar issue. I configured OS X 10.6.5 for L2PT using a GUI software, but the vpnd dies occasionally, often very soon, leaving the following log. Do I need the OS X Server to get vpnd to actually work? A typical unix feature like this should be fixed immediately...
11/01/04 14:21:03 racoon[98] Connecting.
11/01/04 14:21:03 racoon[98] IKE Packet: receive success. (Responder, Main-Mode message 1).
11/01/04 14:21:03 racoon[98] IKE Packet: transmit success. (Responder, Main-Mode message 2).
11/01/04 14:21:04 racoon[98] IKE Packet: receive success. (Responder, Main-Mode message 3).
11/01/04 14:21:04 racoon[98] IKE Packet: transmit success. (Responder, Main-Mode message 4).
11/01/04 14:21:04 racoon[98] IKEv1 Phase1 AUTH: success. (Responder, Main-Mode Message 5).
11/01/04 14:21:04 racoon[98] IKE Packet: receive success. (Responder, Main-Mode message 5).
11/01/04 14:21:04 racoon[98] IKEv1 Phase1 Responder: success. (Responder, Main-Mode).
11/01/04 14:21:04 racoon[98] IKE Packet: transmit success. (Responder, Main-Mode message 6).
11/01/04 14:21:04 racoon[98] IKE Packet: receive success. (Information message).
11/01/04 14:21:05 racoon[98] IKE Packet: receive success. (Responder, Quick-Mode message 1).
11/01/04 14:21:05 racoon[98] IKE Packet: transmit success. (Responder, Quick-Mode message 2).
11/01/04 14:21:05 racoon[98] IKE Packet: receive success. (Responder, Quick-Mode message 3).
11/01/04 14:21:05 racoon[98] IKEv1 Phase2 Responder: success. (Responder, Quick-Mode).
11/01/04 14:21:05 vpnd[975] Incoming call... Address given to client = 10.0.1.121
11/01/04 14:21:05 vpnd[975] --> Client with address = 10.0.1.121 has hungup
11/01/04 14:21:06 vpnd[975] Incoming call... Address given to client = 10.0.1.122
11/01/04 14:21:06 vpnd[975] --> Client with address = 10.0.1.122 has hungup
11/01/04 14:21:08 vpnd[975] Incoming call... Address given to client = 10.0.1.123
11/01/04 14:21:08 vpnd[975] --> Client with address = 10.0.1.123 has hungup
11/01/04 14:21:12 vpnd[975] Incoming call... Address given to client = 10.0.1.124
11/01/04 14:21:12 vpnd[975] --> Client with address = 10.0.1.124 has hungup
11/01/04 14:21:16 racoon[98] IKE Packet: receive success. (Information message).
11/01/04 14:21:16 racoon[98] IKE Packet: receive success. (Information message).
11/01/04 14:22:25 com.apple.SecurityServer[21] Session 0x362790 dead
11/01/04 14:22:25 com.apple.SecurityServer[21] Killing auth hosts
11/01/04 14:22:25 com.apple.SecurityServer[21] Session 0x362790 destroyed

CISCO RV110W VPN fail.

Hi,
I have a Aztech DSL1015EW(S) and Cisco RV100w router. Below is my Setup.
Phone line --RJ11-----> DSL1015EW(S) ----- RJ45------> RV110W
- I tried to build VPN connection from remote laptop to RV110W (failed)
- Quick VPN also faied
- PPTP also failed
Port forwarding done on DSL1015EW
I dont have public ip address
i am using dydns.
what can i do ? please help me.
Quick VPN error message is "Gateway not response Do you want ot wait"
PPTP error code is cannot estiblishe to remote host.

Good morning
Hi Hein, thank you for using our forum, my name is Johnnatan I am part of the Small business Support community.
I apologize for your inconvenience, in this case I advise you to check this link with useful information regarding Quick VPN https://supportforums.cisco.com/docs/DOC-29399
I hope you find this answer useful,
*Please mark the question as Answered or rate it so other users can benefit from it"
Greetings,
Johnnatan Rodríguez Miranda.
Cisco Network Support Engineer.

PPTP VPDN and Cisco Client errors

Hello there, i have configured a cisco 1841 router as a vpn server for microsoft pptp client access. When connecting outside my local lan it hangs at verifying username and password then gives me error 619 message "remote computer did not respond so port was closed". I am however able to connect on my local lan. I also have Cisco's VPN client configured on the router which works fine and able to receive emails in microsoft outlook but cannot send any emails. The emails just sit in the outbox till i connect to my local lan.Anyone who has experienced a similar problem? I have tried all the configs in the the forum and problem still persists. Any solutions?? Thanks

Try these links:
http://www.cisco.com/en/US/tech/tk827/tk369/technologies_configuration_example09186a00801e51e2.shtml
http://www.cisco.com/en/US/tech/tk827/tk369/tech_configuration_examples_list.html

Error 798 with PPTP-EAP VPN (Windows 7 x64)

Hello,
My work has a PPTP-EAP VPN which uses smart card authentication to login. I can connect just fine with the smart card, but I'm trying to setup the VPN connection so it can read the certificate from the local certificate store, instead of me having to insert
the smart card every time.
I've placed the certificate from my smart card into the Personal certificate store, and I've edited the authentication properties of the PPTP VPN connection to "use a certificate on this computer". [BTW, in the Security tab under the Authentication section,
"Use Extensible Authentication Protocol (EAP)" is select, and in the drop-down list, "Microsoft: Smart Card or other certificate (encryption enabled)" is selected.]
However, when I try to connect, I get the following error:
Error 798: A certificate could not be found that can be used with this Extensible Authentication Protocol.
What do I have to do so that Windows will know that the certificate I placed in my Personal store is to be used with the VPN connection?
Thank you for any help.
Regards,
Jim

Hi,
You may take a look at
http://social.technet.microsoft.com/forums/en-US/itprovistanetworking/thread/fc605246-aa2e-45d8-a226-bbf1dfb3f198/ and find the second post by Heider.
Kim Zhou
TechNet Community Support

Nortel VPN connects and disconnects immediately. Error 6699 with PPTP

Hi All,
I am using OS X Mavericks on my mac. I tried to connect to PPTP internet connection using the default client and paid clients like Shimo.I get connected and after a minute I get disconnected with 6699 error. I read a lot of discussions about this issue and I realised this issue exists from Pather days. Please help me out with this if you have a working solution.

Hi, might try this after reading about that error, I think it may fix it...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
Check your DNS numbers are good.

Error 807/800 - using PPTP VPN from Windows 7/XP t...

Hi,
I wonder if someone could help me? I've had this issue for about 3 months now and I’m completely at a loss now. I’m trying to connect remotely to a Windows 2003 server via Windows VPN (PPTP) from home. This had been working fine for months (Draytek 2830n purchased in Feb 2011), there has been no configuration changes beforehand to cause the problem.
Problem
From Windows 7 PC – I receive Error 807 – “The network connection between your computer and the VPN server was interrupted. This can be caused by a problem in the VPN transmission and is commonly the result of internet latency or simply that your VPN server has reached capacity. Please try to reconnect to the VPN server. If this problem persists, contact the VPN administrator and analyze quality of network connectivity”
From a Windows XP PC – I receive Error 800 - Unable to establish the VPN connection. The VPN server may be unreachable, or security parameters may not be configured properly for this connection”
Steps Taken
I have carried out the following steps to trying and resolve the issue:-
Setup port 1723 on router(s)
Swapped out router for a completely different model
Upgraded firmware on Drayek 2830N
Tried various laptops and desktop PCs running Windows XP and Windows 7
Switched off local windows firewalls and Norton Anti-virus software
Opted out of BT Web Address Help service
Rebuilt the Windows 2003 Server and setup remote access again.
Tested the desktops and laptops that didn’t work at home from various locations (work, friends houses) and they work fine from another location (so this rules out the Windows 2003
The only thing that I can’t swap out is my BT line to the Exchange. Any ideas or suggestions would be extremely helpful. I’m thinking it must be a problem with my ADSL connection, perhaps the traffic is being blocked (for some reason) as I’ve explored all other avenues. I’m out of contract with BT now (although I don’t want to move ISP) I might end up having to if it solves the problem.
Many thanks for looking.
Steve

posted in error as you've already looked at BT web address help. Sorry
-+-No longer a forum member-+-

PIX PPTP VPN error

hi!
im encountering error on PIX 515e. I tried to configure the firewall to be come VPN server using PPTP. When I tried to connect remotely, i recve this messge from the remote computer trying to stablish VPN. The error is, The Remote Computer is not Responding.
Any suggestions?
Tnx!

If you have already followed the steps listed in the below URL, check the current configuration on the pix and also run the debugs listed in the URL and post the outputs if possible.
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080143a5d.shtml
Regards,
Arul

WRT300N V1.1 Time Out Errors

I keep getting Time Out Errors when trying to connect wirelessly with this router. I go into the prefs, turn WiFi off, then back out.... usually that helps matters, and everyone can log back in... at least for a while, then it happens all over again. I can't really re-set the router.... this is a small office and loosing connectivity isn't an option, and re-setting the router shouldn't be required every few days anyway. Settings are: Network Mode: Mixed Radio Band Wide Wide Channel 3 Standard channel 5 - 2.432 Ghz Security Mode WPA2 Personal Encryption AES key Renewal 7200 Any ideas ?

Try changing few more settings on the router ....
Click on Advanced Wireless
settings>>Change the Beacon Interval to 75 >>Change the Fragmentation
Threshold to 2304 Change the RTS Threshold to 2304 >>Click on "Save Settings" ....

WRT300N V2 pptp error

Similar Messages

Maybe you are looking for