WRT310N locks up twice a day

I just got a WRT310N that I am using with my Comcast cable modem and with my home network (my house is wired with Cat6 gigabit). I got it installed yesterday in and it worked for several hours but then it locked up, no computers could get ip's (wireless or wired) I couldn't even get to the setup screen for the router (to reboot it or find out what was up) over a wired connection. I know it was the router b/c I reset my cable modem BEFORE I reset my router to no avail, once I reset the router (power cycled), it worked fine. Then it happened again last night and this morning. I checked for a firmware upgrade and there is none, I turned the firewall off but other than that this thing is in factory mode (well different SSID). Has anyone else had problems with this? I am expecting this thing to work well with my wired connections, Thanks for suggestions! -James
(Edited post for guideline compliance. Thanks!)
Message Edited by JOHNDOE_06 on 03-09-2008 11:27 AM

I have same problem.  actually works fine for a couple of days sometimes.  then other days have to keep resetting the router.  i've tried all the fixes online and also reinstalled.  waited on hold with the 800 number for 1 hour never got through. 

Similar Messages

  • Hp pavilion g4 1104dx display white screen and caps lock blink twice

    Hi i recently used my hp laptop screen to test another laptop acer aspire 5517. After the test i reconnected back the cable only to power it on a white screen appeared with caps lock blink twice. I thought the problem might be screen shot so i decided to connect to external monitor but still no signal on external monitor even after pressing fn+f4. What might be the problem thanks.

    Hi there , Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I understand you are having an issue with your Notebook. You had stated that you receive a White Screen and the Caps Lock are blinking twice. Please be very careful when it comes to blink patterns as sometimes there can be a pause between the blinking.   Before you start troubleshooting, please note remove any and all USB devices. Disconnect all non-essential devices, as these could cause some issues. Here is the first document I found called Performing a Hard Reset or Forced Reset. If that does not work, please follow Computer Does Not Start (Windows 8). The last document I have for you that may help is called Computer does not start and the LEDs blink or the computer beeps. Please follow these provided troubleshooting steps, re-post and let me know how everything went. Thank you! Have a great day!

  • Since I updated to iCloud, Mail on my MacBookPro 10.6.8 has been unable to connect to MobileMe more than once or twice per day. Mail on my iPhone 4 has no problems. What's wrong?

    Since I updated to iCloud, (which may or may not be related) Mail on my MacBookPro 10.6.8 has been unable to connect to MobileMe more than once or twice per day. Mail on my iPhone 4 and my old iMac has no problems. When there is no service a yellow warning triangle appears adjacent to the Inbox and Connection Doctor reports,"Trying to log into this MobileMe IMAP account failed. Verify that username and password are correct."  Since it does fetch Mail from time to time they cannot be wrong.... can they? Should I update to 10.7 and if so what does that entail?

    You have been using MobileMe's email settings, which sometimes continue to work for a time after migration but then get turned off. iCloud's mail server settings are different. Strictly speaking Lion 10.7.2 is required for iCloud, and on that Mail is set up automatically.
    Snow Leopard cannot access most of iCloud's facilities, however you can set Mail up manually to access your email. The method is described here:
    http://www.wilmut.webspace.virginmedia.com/notes/icloudmail.html
    The situation with iCloud and Snow Leopard is described in detail here:
    http://www.wilmut.webspace.virginmedia.com/notes/icloudSL.html

  • Is there a way to have longer battery life on a 4s iPhone?  Brand new iPhone 4s out of the box I have to charge twice a day.

    Is there a way to have longer battery life on a 4s iPhone?  Brand new iPhone 4s out of the box I have to charge twice a day.

    Absolutely.  Search this forum or look in the "More Like This" box to your right.

  • User Profile Syncrhonization Scheduling twice a day

    Client wants to schedule User Profile Synchronization from AD scheduling twice a day at 12.00 AM and 12.00 PM which includes any update in the AD photos also. How can I achieve this ?

    You cannot set multiple single run schedules for timer jobs within SharePoint. You can only do one of the following:
    Run every X minute
    Run between X and N minute every hour
    Run daily [between times]
    Run weekly [between days/times]
    Run monthly [days/times]
    There is nothing in CA that will allow you to input 'run at noon and midnight', so the other option is to control it via PowerShell/Task Scheduler.
    Trevor Seward
    Follow or contact me at...
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Oracle 10g Database Hanging twice a day

    My database server has 10g with MS 2003 server as OS.
    Twice a day the database hangs and does disconnects all the users from local and remote locations.
    Current SYSTEM tablespace has a size of 470 MB and is 98.86 in use, when I try to add another datafile as 'SYSTEM02.DBF' in the same path where other system data files are, I kept this operation running during weekends but datafile was not added.
    Has it anything to do with the MS 2003 server no. of users.
    Any other suggestions for SYSTEM Tablespace to be free.
    Please reply.
    Thanks
    Ajaz Ahmed

    Hi friends / sameer,
    Sorry for the delay. Here is the attached alert.log file Since the data from foxpro was loaded into oracle on to oracle 10 g from 7th may the problem of database hanging started from the next day. I joined the organization on 22nd july.
    Current SYSTEM tablespace has a size of 470 MB and is 98.86 in use, when I try to add another datafile as 'SYSTEM02.DBF' in the same path where other system data file is, it does not add. I kept this operation running during weekends but datafile was not added.
    Has it anything to do with the MS 2003 server no. of users.
    Any other suggestions for SYSTEM Tablespace to be free.
    If you can get me your mail id then I can send the
    attachment of alert.log file as [email protected] bounces back.
    Thanks
    Ajaz Ahmed

  • My daughter's phone racks up data usage every 12 hours, twice a day, even though she isn't using it. Anybody know why this would be happening or how to track it/stop it?

    My daughter's phone racks up data usage every 12 hours, twice a day, even though she isn't using it. Anybody know why this would be happening or how to track it/stop it?

        Its all good, TimN8128! Mrhelper is corret with regards to making sure that mobile data is turned off when on WiFi or when not connected to WiFi, if you do not want the phone to access data services to update or refresh app services. These applications can all be configured by going to Settings and reviewing all apps that appear in that area. You can also configure a bit further by going to Settings>Cellular.
    NicandroN_VZW
    Follow us on twitter @VZWSupport

  • I recently upgraded to Mavericks and the time machine is failing to backup.  Time Machine began only backing up twice a day and now has stopped.

    I recently upgraded to Mavericks and the time machine is failing to backup.  Time Machine began only backing up twice a day and now has stopped.

    This is the error message I got:
    2014-03-18 17:02:30 -0400 com.apple.backupd[4971]: Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/TOSHIBA EXT/Backups.backupdb/Quincy’s iMac size:37
    2014-03-18 17:02:30 -0400 com.apple.backupd[4971]: Backup failed with error 2: 2

  • E2500 - Needs to be Power Cycled Once or Twice a Day.

    Brand new E2500, needs to be power-cycled once or twice a day. Already reinstalled Cisco Connect and updated the Firmware.
    Having some problems with my brand new router and customer service is being of VERY LITTLE help! What should I do?

    Let me know the concern that you have, is with the wired connection or with the wireless connection?
    You said that you have upgraded the firmware, but after upgrading the firmware you didn’t reset the Router… So reset the Router, power cycle the whole network… Then follow the steps:
    If you want to configure the router with the help of the CD so for that you need to uninstall the existing Cisco Connect Software from the computer if there...
    Reset the Router and power cycle the network...Make the following connectivity – Connect the Modem with the Router’s Internet port and then connect the Computer with any one of the Ethernet port of the Router [Numbered 1, 2, 3 and 4]... Then install the Cisco Connect Software... It will help you in configuring the Router...
    Otherwise you can configure it manually as well…For Let me know the name of the ISP [Internet Service Provider] – means the connection is a DSL connection or cable connection…
    So if you have a DSL connection you can refer to this link:
    http://www6.nohold.net/Cisco2/ukp.aspx?pid=93&login=1&vw=1&app=search&articleid=4020&userrole=Linksy...
    So if you have a Cable Internet Connection you can refer to this link:
    http://www6.nohold.net/Cisco2/ukp.aspx?pid=93&vw=1&articleid=3686
    As far as the wireless is concern:
    # Open up the browser and on the address bar type “IP address of the Default Gateway” that will open up the Router setup page…
    # Then Click on wireless Tab create the Wireless Network Name SSID and select the channel to 6, 9, and 11… Click Save Settings...
    # Then Click on Wireless Security sub tab and select the security mode and provide the password as per the requirement… Click Save Settings...
    After doing the settings try to connect the preferred network on the wireless devices and check the connectivity….

  • Update SharePoint list programatically twice a day with SQL 2008 r2

    How complicate is to sustain the update  SharePoint list programatically twice a day by using SQL job?
    the data need  to be update twice a day and it is going o be use to feed a share point form...where the user(S) will be choosing by lookup in infopath form.
    BTW..I do not have control of the SharePoint farm, I have MS SQL 2008 R2 and SharePoint version is 2010. 
    Or Also I am considering to use  MS access 2010 and SharePoint version is 2010.
    CRISTINA&amp MICROSOFT Forum

    >DRAFT IDEA<
    Is this will corrupt SharePoint if I try this?
    The two data list that I want to update twice a day come from other database sources
    One is from Human Resources roster list. (The result of the query) –amount of records >> 600
    UNREAL
    example
    Unique ID
    domain name
    Region
    Badge
    Full Name
    email address
    Manager
    Director
    EUROPE
    EMEA
    123456
    Bear, Charles
    [email protected]
    Hanc, Juilan
    Cano, Oscar
    AMERICAS
    ABU
    223456
    Ros, Adrian
    [email protected]
    Knight, Dexter
    Brown, Dexter
    ASIA-PACIFIC
    APJ
    323456
    Chen, Andy
    [email protected]
    Ducann, Scott
    Ginger, Jeff
    (JOIN) From the roster list connect with the User Information List "user
    credential"(/_vti_bin/UserProfileService.asmx) to allow me Create dependent drop-down by using these articles:
    https://claytoncobb.wordpress.com/2009/06/21/userprofileservice-extended/
    http://sharepoint911.com/blogs/laura/Lists/Posts/Post.aspx?ID=172
    http://blogs.msdn.com/b/infopath/archive/2004/03/24/95529.aspx
    http://www.dotnetcurry.com/showarticle.aspx?ID=794
    http://www.codeproject.com/Articles/155829/SQL-Server-Integration-Services-SSIS-Part-Basics
    The second one comes from Account list. (The result of the query) –amount of records >> 22,000
    FAKE
    example
    Unique ID
    email_address
    account_id
    account_lk_id
    account_name
    subdivision_region_name
    subdivision
    support_model
    [email protected]
    22650
    22649
    NANA Web Skills
    AP
    Martial Law
    PunkingSPlus
    [email protected]
    16624
    16624
    ELECTRIC FOOD
    AMER
    Short Circuit Blue
    PunkingSPlus
    [email protected]
    12538
    12538
    100 Got drunk
    EMEA
    100 Got drunk
    PunkingSPlus
    [email protected]
    22206
    22205
    911 Hospital Ghost
    AP
     Hospital AP
    PunkingSPlus
    [email protected]
    6886
    6886
    Administration for UFO LAND
    AP
    Xiamen
    PunkingSPlus
    [email protected]
    22242
    22241
    ACT  Recording
    EMEA
    ACT  Recording  Orange
    PunkingSPlus
    (JOIN) In this list I will need to do the same connect with the User Information List "user
    credential"(/_vti_bin/UserProfileService.asmx)
    To narrow these lists to what they are only responsible to work..
    These two tables are going to be part of InfoPath form ...
    with these draft idea , Do I need to be considering to be using what you suggest ? >>>"PowerShell
    availabe in SQL and the CSOM to interact with SharePoint "
    Could be possible that you can also provide an article?? relate to ....
    "Firstly you must not update SharePoint content databases directly from SQL. Doing so may
    corrupt your farm and will render it unsupported by Microsoft."
    Thanks in advance
    CRISTINA 

  • Scheduling PC twice a day

    hi,
    i need to schedule my PC to run twice a day:
    once in the morning and the second time at noon, how can i perform it ?
    thanks a lot
    Nir Kaminsky

    Nir,
    If you want to schedule periodically means daily, weekly or every 12 hours(hourly) you can do this from Process Chain start variant settings as already explained.
    But if you want to execute 06:00 and 12:00 then you can do using those settings.
    Its better to start process chain through an Event. create an abap program to raise an event.
    Check: [how to ... start process chain through an event|http://sapbwneelam.blogspot.com/2007/09/how-to-start-process-chain-through.html]
    Hope it Helps
    Srini
    [Dont forget to close the call by assigning points.... - Food for Points: Make a Difference through Community Contribution!|https://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/007928c5-c4ef-2a10-d9a3-8109ae621a82]

  • Continual Value Change Twice a Day

    I am getting the following value change twice a day at approx 11am and 7pm everyday since the fix, tried a reset after the fix was applied but it is still happening everyday, is this normal.
    11:16:05, 01 Mar. (432666.450000) CWMP: session completed successfully
    11:16:04, 01 Mar. (432665.930000) CWMP: HTTP authentication success from https://pbthdm.bt.mo
    11:16:01, 01 Mar. (432662.590000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username
    11:16:01, 01 Mar. (432662.580000) CWMP: Session start now. Event code(s): '4 VALUE CHANGE'
    11:16:00, 01 Mar. (432662.190000) CWMP: Initializing transaction for event code 4 VALUE CHANGE
    Also, since the original firmware update .204 I am getting the lan reset (but no boot or orange light reset) every end of third day of been up before and after fix, is this normal. Further since the firmware update my speed has gone down to around 34 Mbps from around 38Mbps, is this due to dlm because of the resets which I mentioned in a previous post and is it likely to go back up. Have a brand new HG612 3B OR modem given to me by the engineer at time of installation as a backup, would this get rid of the dlm.
    These are my stats (minus serial no):
    1. Product name: BT Home Hub
    2. Serial number: xxxxxxxxxxxxxxxxxxxxxxxx
    3. Firmware version: Software version 4.7.5.1.83.8.204 (Type A) Last updated 23/01/15
    4. Board version: BT Hub 5A
    5. DSL uptime: 2 days, 18:07:59
    6. Data rate: 9230 / 34219
    7. Maximum data rate: 9182 / 40362
    8. Noise margin: 6.2 / 6.5
    9. Line attenuation: 36.8 / 23.5
    10. Signal attenuation: 36.3 / 22.0
    Bt Wholesale Broadband Checker:
    FTTC Range A (Clean) 46.1 33.1 10 6.6 -- Available
    FTTC Range B (Impacted) 39 22.4 10 4.8 -- Available
    WBC ADSL 2+ Up to 5.5 -- 3 to 8 Available
    WBC ADSL 2+ Annex M Up to 5.5 Up to 1 3 to 8 Available
    ADSL Max Up to 4 -- 3 to 7 Available
    WBC Fixed Rate 2 -- -- Available
    Fixed Rate 2 -- -- Available
    Thanking you for any help in advance.

    Call bt up on 08001114567 and ask them to do a test on your line if it comes back clear then it's more than likely your homehub, if they say it's your line then they will send an engineer out, if the problem is within your home you will be charged £130, but bt will tell you all the details .

  • Start JDBC Receiver channel twice per day

    Hello,
    I need to get some piece of data from Oracle database twice per day. For example at 12:00am and 12:00pm. Standard JDBC Receiver channel has no needed settings. It has only "poll interval" without exact time.
    I can set up "poll interval" to 12 hours, but this can't guarantee that JDBC receiver channel will works only twice per day. For example after XI system restart JDBC adapter loses time counter. It means that JDBC adapter can starts more than 2 times per day.
    I have only one idea at this moment.
    I can create ABAP program which can be planned as ABAP job at needed time and with needed period.
    This program should send some dummy message to Integration Engine. Integration Engine should start some Integration Process which can read data from Oracle database via JDBC channel.
    What else opportunities are?
    Thanks.
    Best regards,
    Eugeny

    Message deleted
    Message was edited by: Shabarish Vijayakumar

  • My Airport Express just stops working. Computer keeps searching for it. DSL modem is OK. Have to unplug Airport Express and replug to get it to work again. Starting happening sporaticaly some time ago, but now it is about once a day, maybe twice a day. Ha

    My Airport Express just stops working. Computer keeps searching for it. DSL modem is OK. Have to unplug Airport Express and replug to get it to work again. Starting happening sporaticaly some time ago, but now it is about once a day, maybe twice a day. Has v.6.3 on it. Supposedly up to date.What's the problem?
    Has anyone had that happen? Solution? (other than purchase a new one.......)

    My Airport Express just stops working. Computer keeps searching for it. DSL modem is OK. Have to unplug Airport Express and replug to get it to work again. Starting happening sporaticaly some time ago, but now it is about once a day, maybe twice a day. Has v.6.3 on it. Supposedly up to date.What's the problem?
    Has anyone had that happen? Solution? (other than purchase a new one.......)

  • I have a 5s with the ios 8.0 update, I have to charge my phone twice a day,  is that normal ?

    I havean I Phone 5s with the IOS 8.0 update, I have to charge my phone twice a day, is that normal?

    It depends on how much you use it. If the battery runs down and you are not using the phone then there's an app that is running away uncontrollably. See: http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain. However, if you actively use the phone for more than 6-8 hours a day then its normal.

Maybe you are looking for