WRT350N: Vista cannot get wireless connection

I recently got a laptop to use on a wireless connection to my WRT350N. When I first set it up, it easily got a wireless connection to the WRT350N. After a few weeks of reliable wireless operation, the wireless connection would occasionally disconnect without warning or any apparent reason. I was usually able to reconnect fairly quickly until a couple of days ago. From that point on, reconnection was not assured. I switched the wireless mode on the WRT350N from mixed to one of the other options and got my last successful connection. Soon after that, the wireless connection dropped again and I've never been able to reconnect since, no matter what settings I specify. Windows Vista sees other wireless networks available (from neighbors' homes), but does not see my WRT350N even when sitting right next to it.
I've tried the EasyLink Advisor and it just says: "EasyLink Advisor could not establish a wireless connection to the Router." That's not very helpful. How can I restore a wireless connection from my laptop to the WRT350N?
Message Edited by tocumen on 09-04-2007 01:19 AM

Thanks, Helm, for your reply. Before seeing your reply, I called Linksys tech support and we got it working again. Basically, they had me clear the list of wireless connections under "manage wireless networks" in Vista. They had me change the security settings from PSK2 Personal and enter a new key. With that, I was able to get a wireless connection again. I told the tech that I preferred to stick with PSK2. So I switched back while he was still on the phone and got a successful wireless connection with PSK2. He suggested that my loss of connection in the first place was caused by the key being changed under PSK2 / AES and it was related to the key renewal period. It wasn't clear how to avoid encountering the trouble again. But at least I know how to recover from it should it happen again.

Similar Messages

I cannot get wireless connection and cannot reconnect too?

I installed Os x Mavericks on my apple MacBook Pro a couple of days back and now the wireless is gone. I tried connecting back to wireless but it does not go through. Just do not know what to do.

Troubleshooting Wi-Fi issues in OS X
Wireless Connection Problems - Fix
Wireless Connection Problems - Fix (2)
Wireless Connection Problems - Fix (3)
Wireless Connection Problems - Fix (4)
Wireless Diagnostics - About

I cannot get wireless connection from my AirPort Extreme, despite my ipad confirmed i am wireless connected to the AirPort Extreme.

I cannot browse pages like Google or Yahoo as i get error message saying "Safari could not open the page because the server stopped responding". I have tried resetting the Airport Extreme to factory setting and unplugged everything and reconnected them, but still i see that my ipad has connection with the Airport Extreme but i cannot browse the internet using wireless via my ipad. can anyone help ?

Did you ever get an answer to this? Or figure out a solution? I have the same problem.

I cannot get wireless connected on iPhone

I enter my password but my iPhone will not connect. My other iPhone does the same thing. My Mac and my iPad work on the wireless???

If you mean it does not connect to your home WiFi network you can probably fix it by rebooting your router. Remove all power from it for about 15 seconds. Even if it works with other devices.

I have a MacBook Pro and all of a sudden I cannot get wireless internet connectivity to my router or any other router, I get connectivity through the ethernet port but not wireless. This was working well till this morning

I have a MacBook Pro and all of a sudden I cannot get wireless internet connectivity to my router or any other router, I get connectivity through the ethernet port but not wireless. This was working well till this morning

BXB1905 wrote:
I tried the Apple diagnostics it did not work.
What do you mean it did not work! What were the results of the diagnostic tests?
Have you contacted your ISP to determine if the problem is on their end?
Have you changed your router channel? Sometimes this resolves wireless problems.
Your profile confirms you are using Lion. Check out the following:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
Configuring 802.1X in Mac OS X Lion and Later

Cannot get Wireless to work

I have a brand new W520 for my company and we cannot get wireless to work. Here is what I tried.
Clean install of Windows 7 Professional
Installed the ThinkVantage tools, including Access Connections.
Installed the drivers from the Lenvo Support site. Had to install manually as Lenovo System Update would not return anything for me to install, even when I had a ton of missing drivers.
Installed the ThinkPad Wireless LAN drivers for the wireless card in my system. I have the ThinkPad b/g/n card.
No wireless adapter is found for the wireless, just the Intel 82579LM Gigabit Network Connection which works fine for the wired connection.
The wireless radio is on. I flipped the switch mutliple times. The screen seems to flicker when I flip it but nothing happens.
ThinkVantage Access Connections says "No supported wireless adapters are installed on the system" when I click "Manage Wireless Radio".
I verified the card is seated properly and the connections are all tight.
I ran a PC Doctor scan (from boot disk) against the wireless card and it Passed.
In Device Manager I have two items remaining that show issues.
Base System Device
Network Controller
I can't seem to resolve those two items in device manager with any of the drivers I've found on the Lenovo support site.
Any suggestions?
Solved!
Go to Solution.

Hi egregorich,
Check in the BIOS whether it's enabled, F1 to enter the BIOS, it should be under Config -> Networks.
Also, can you let us know what does the sticker on the card say? Does it say Intel Wimax 5150 or 5350?
Try the following driver, the one on this support page is incorrectly linked as ThinkPad driver when it's not (or unless the ThinkPad card in your system is from Intel which I highly doubt):- http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-76909
Keep us posted.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

5130 cannot get phone connection, using as modem

Recently purchased 5130 to use as modem for my laptop. Am using sim card from primary phone to access internet (primary phone has internet service), and connection with USB cable. Downloaded PC suite, have Vista OS. Have set specs to phone and internet provider (AT&T) but cannot get connection. Error display says cannot get phone connection. Phone works in phone mode, although cannot see contacts.
( I have a new bluetooth USB adaptor, but do not want to open package if I can get cable to work. No point in opening blue tooth yet as cannot even get phone connection.)
Any advice?

Hello, dthurnherr.
Thank you for visiting Apple Support Communities.
Here are a couple troubleshooting articles that I would recommend going through when experiencing this issue.
FaceTime for Mac: Troubleshooting FaceTime
http://support.apple.com/kb/ts4185
Unable to make or receive FaceTime calls after April 16, 2014
http://support.apple.com/kb/TS5419
Cheers,
Jason H.

WRT300N V1.1 - Firmw v1.51.2 - Problems to get wireless connection after long idle time

Hello,
I have a WRT300N, v1.1 with latest firmware available (v1.51.2).
I've been experiencing a strange problem:
1. After long idle time (router is on, no devices are using it wirelessly), no device can get a wireless connection;
2. I have tried using different OSes (Windows XP SP2, Windows Vista, and Symbian OS);
3. Wireline connection to a FE port works (if I plug a device using the cable, I can get an IP address and navigate to the internet).
4. If power reset it (WRT300N), I can get wireless connections working again.
Is this a known issue?
Thanks, Gustavo

Well as you are able to go online from your Hardwired Computer, then i think you need to make some changes on the Wireless Part of your Router. Follow this settings on your Router, i think this might solve the problem.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Wide-40MHz and change the Wide channel to 9 and Standard Channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on save settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select AES...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone.
NOTE : Passphrase should be more that 8 characters...
Click on Advanced Wireless Settings
Change the Beacon Interval to 50 >>Change the Fragmentation Threshold to 2304 Change the RTS Threshold to 2307 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

Cannot get maile connection to server failed

followed the instructions for icloud set up in apple support for ipad and iphone even deleted the account and then set the account up with the correct ID and password. I do use a different ID than my apple ID for my icloud account. I use my me.com email address. I can get into the cloud on my pc and I can send and recieve email when I log into my icloud account but this fails to work on my ipad and iphone. Attempts to seen or get email on these devices when on a wifi network end up with the message "cannot get mail connection to server failed"
lee

Hi HLSdoc,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iCloud: Troubleshooting iCloud Mail
http://support.apple.com/kb/ts4002
Issues sending or receiving mail on iPhone, iPad, or iPod touch
Best of luck,
Mario

I get wireless connection but my internet does not work on my ipad 2

I get wireless connection but my internet does not work on my ipad 2

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I cannot get wireless mouse to work in windows 7 using bootcamp

I cannot get wireless mouse to work in windows 7 using bootcamp

OK, that is a Bluetooth mouse so open Windows Devices and Printers>Add a Device Toggle the power (on the mouse) off and then on. he mouse should appear in the window, follow instructions to add it.

Cannot get Local Connection, No available resource, Wait-time expired

Hi Friends,
Please answer my queries below.
Thanks and Regards
Busincess Requirement
I have to display a particular set of rows in a dashboard or screen, and it is being refreshed every 1 minute, also user can update from that screen displayed values.
The below program extracts some data from database and passes to the front end through a collection where it is being displayed.
Code Logic Flow
1. CockpitAction calls CockpitOraDAO for database results
2. CockpitOraDAO is a singleton class.
3. After getting the CockpitOraDAO object, the action will then call the getLabAreaCockpitDetails() method.
getLabAreaCockpitDetails will
     - Get the Connetion from the OracleConnectionManager class (It is a plain class with getPooledConnection() and releaseConnection() methods).
     - Execute the query and put the result to a collection
     - close the connection
     - return result to the calling action.
This getLabAreaCockpitDetails() are called around once in every 1 minute
So, I believe everytime a call is made to action for cockpit display, it will take the existing object of the CockpitOraDAO class and make a call to database. i.e there will be only one object of CockpitOraDAO reside in application server at any particular interval of time.
My Understandings
1. Only 1 object of CockpitOraDAO will reside in application server (provided it is not user longer and garbage collected) at a particular instance.
2. Many objects of Connection will be created and destroyed.(Each time the getLabAreaCockpitDetails() method is called, we will get one connection from connection pool and in finally the Connection will be released to connection pool).
My Problems
It is showing the "Cannot get Local Connection, No available resource, Wait-time expired"
after running around 1 full day.
My doubts
1. Can anybody say why I get this error ?
2. There may be some connections are not closed. But I have checked at finally block, the status of the connection is closed after calling this method.
3. There may be some problem due to the singleton instane of CockpitOraDAO, Is it affecting performance ?
4. Is it valid that I have to make CockpitOraDAO as Singleton ?
public class CockpitOraDAO extends DAOAdaptor //implements BISample
     private static CockpitOraDAO instance=null;
     private static boolean debug = true;
     * The below method will be used to provide the singleton intance of the CockpitOraDAO object.
     public static CockpitOraDAO getInstance()
          if (instance == null)
               synchronized (CockpitOraDAO.class)
                    if (instance == null)
                         instance = new CockpitOraDAO();
          return instance;
     * The below method will be used to get the cockpit details of the lab area.
     * This will return collecton of sample details for the specific lab.
     public Collection getLabAreaCockpitDetails(Collection prevCockpitDetailList,Collection filterCriteria) throws Exception
     if(debug)
          System.out.println("Inside CockpitOraDAO::getLabAreaCockpitDetails() method");
          Connection conn = null;
          boolean sampleExists = false;
          PreparedStatement pstmt=null;
          ResultSet rs=null;
          String returnStr=null;
          StringBuffer sqlQuery = null;
          String tempComment1=null, tempComment2=null;
          LabCockpitDO labc=null;
          LabCockpitDO labc2=null;
          Collection resultList=null, manCommentList=null, labCommentList=null, labCompCommentList=null;
          ArrayList result1List=null, prevCockpitDetail1List=null,filterList = null;
          OracleConnectionManager manager = null;
          boolean flag = false;
          try
               labc2 = new LabCockpitDO();
               prevCockpitDetail1List = (ArrayList) prevCockpitDetailList;
               sqlQuery = new StringBuffer();
               sqlQuery.append("select s.sample_sample_no sample_no, s.sample_inspection_lot_no inspection_lot_no,");
               manager = new OracleConnectionManager();
               conn = manager.getPooledConnection("myDS");
               pstmt = conn.prepareStatement(sqlQuery.toString());
               if(debug)
               System.out.println("Query********"+sqlQuery.toString());
               rs = pstmt.executeQuery();
          catch(Exception e)
               //System.out.println(e);
               throw e;
          finally
                    try
                         manager.releaseConnection("myDS");
if(debug)
System.out.println("Connection Status Closed=true/ Open=false=["+conn.isClosed()+"]");
if(conn!=null || !conn.isClosed())
conn.close();
if(debug)
System.out.println("Connection Status After Closing Connection Closed=true/ Open=false=["+conn.isClosed()+"]");
                         if(rs != null)
                              rs.close();
                         if(pstmt != null)
                              pstmt.close();
                         conn = null;
                         pstmt=null;
                         rs = null;
                         sqlQuery=null;
                         returnStr=null;
                         labc=null;
                         labc2=null;
                         manCommentList=null;
                         labCommentList=null;
                         labCompCommentList=null;
                         tempComment1=null;
                         tempComment2=null;
                         resultList=null;
                         prevCockpitDetailList=null;
                         prevCockpitDetail1List=null;
                    catch(Exception e)
                         //System.out.println("Unable to Release Connection ="+e);
                         throw e;
          //if(debug)
          //System.out.println(resultList);
          return result1List;
     }

Hi,
As you can see from other posts, this is a very common problem. Until now the cause always ends up pointing to a connection not being close.
I suggest you try to run through a full single cycle of you app, while using the CLI monitoting to check that the connections created/closed matches the expected created/closed connections. Also that the number of free connections at the end is correct.

Cannot get a connection, pool error Timeout waiting for idle object

my connection pool setting is
maxActive="3" minIdle="2"                maxWait="10000"              removeAbandoed="true" logAbandoned="true"         removeAbandonedTimeout="30"         autoreconnection="true"
we have 7 people hitting the group of search functions ,
about 3 minutes I get
I got error like
org.apache.tomcat.dbcp.dbcp.SQLNestedException: Cannot get a connection, pool error Timeout waiting for idle object         at org.apache.tomcat.dbcp.dbcp.PoolingDataSource.getConnection(PoolingDataSource.java:104)         at org.apache.tomcat.dbcp.dbcp.BasicDataSource.getConnection(BasicDataSource.java:880)         at Deferment.showResult.checStudent(showResult.java:135)         at Deferment.showResult.doPost(showResult.java:99)         at javax.servlet.http.HttpServlet.service(HttpServlet.java:710)         at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)         at org.apache.catalina.servlets.InvokerServlet.serveRequest(InvokerServlet.java:402)         at org.apache.catalina.servlets.InvokerServlet.doPost(InvokerServlet.java:170)         at javax.servlet.http.HttpServlet.service(HttpServlet.java:710)         at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
I just wonder
1) Cannot get a connection, pool error Timeout waiting for idle object-> cause by connection pool leaking or other problem.
2) Setting the maxactive to -1 ( suggestion from Google) , if I set my connection to ulimit , waht should I put on minIdle="2"
3) How can I test my connection pool have problem or not ? is
SHOW PROCESSLIST; tolding me someinformation? I use Mysql
Thank you!

I try something like ps2 = conn.prepareStatement(target);
            ps2.setString(1, UNumber); // set input parameter
            rs = ps2.executeQuery();
            sendMail = 0;//how many rows we can find.
            while (rs.next()) {
                sendMail++;
            ps2.close();
            rs.close();
            conn.close();
if ((count1 == 0) || (count2 == 0)) {
                conn.rollback();
            } else {
                conn.commit();
                conn.setAutoCommit(true);
            ps.close();
            calstat2.close();
            conn.close();
calstat = (CallableStatement) conn.prepareCall("{call findStudent}");
            calstat.executeQuery();
            calstat.close();
            conn.close();is that enought? what else I should do to make sure I did close all the connection, after I use it ?
thank you

Sybase jconnect and tomcat 5. Getting error:Cannot get a connection, pool

Hi,
I am not sure why i am getting this error.
All the drivers are in the write location. Tomcat does find and load the driver correctly.
But... when i try to connect, i get this error.
org.apache.commons.dbcp.SQLNestedException: Cannot get a connection, pool exhausted, cause:
java.util.NoSuchElementException: Could not create a validated object
at org.apache.commons.pool.impl.GenericObjectPool.borrowObject(GenericObjectPool.java:851)
at org.apache.commons.dbcp.PoolingDataSource.getConnection(PoolingDataSource.java:140)
at org.apache.commons.dbcp.BasicDataSource.getConnection(BasicDataSource.java:518)
at com.aoltw.ic.ars.data.DAO.connect(DAO.java:233)
at com.aoltw.ic.ars.data.authenticateDAO.getGroups(authenticateDAO.java:114)
at com.aoltw.ic.ars.data.authenticateDAO.getUserInfo(authenticateDAO.java:97)
at com.aoltw.ic.ars.helpcentral.presentation.action.loginAction.authenticate(loginAction.java:35)
at com.aoltw.ic.ars.helpcentral.presentation.action.loginAction.execute(loginAction.java:86)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:446)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:266)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1292)
Thanks
--Arun

What is the "right" location? I'll assume you mean your app's WEB-INF/lib.
Sounds like your Java code isn't closing statements and/or connections properly, or perhaps you need to increase the number of connections in the pool. I'm guessing it's the former.
MOD

"Cannot get mail, connection to the service failed". why and how do I repair it?

"Cannot get mail, connection to the service failed". why and how do I repair it?

Thanks. However...these links are to basic troubleshooting. Good stuff, except I -- like it seems others -- have multiple email accounts coming into their iPhones (my case, iPhone 5 running latest version of iOS) that until this past Friday evening (September 12, 2014).... worked perfectly, then just all stopped.
In my case, I also lost access to an internet forum I frequent multiple times daily. All worked fine, until things abruptly stopped working the evening of September 12.
Seems like anything with a stored login/password got hosed.
I went into the profiles to make sure my passwords were still there (thought they may have somehow gotten wiped out), but they were there. I re-entered them just in case, no change.
Now just this morning, Sunday September 14, two emails from the same (employer) email account have trickled in. But nothing from the others (gmail, yahoo mail).
Spouse is having same issue on an iPhone 5.

WRT350N: Vista cannot get wireless connection

Similar Messages

Maybe you are looking for