WRT54G time filter issue

A buddy of mine has successfully setup time-based access filtering at his house based on the MAC address but his son has figured out that if he changes the time zone on his PC he can circumvent the filtering. I believe he is running v5 and the latest firmware. Any way for the WRT54G to use it's time rather than that of the PC for the filtering?

That is how it is setup. All is functioning (turns off/on at correct times) but it seems to be sniffing the time from the packets coming from the PC and using that to filter on. He gets around it by changing his TZ to that of Alaska (we are in CST) and gets a couple more hours.

Similar Messages

Time out issues

I have a program which will retrieve the accounting information, the result as like as T-code F.19, but when i execute the program it will caused time out issue, I have not idea how to solve it. Could you help. Here is the source code which cause time out. Thank!
   select * from bsis
      into corresponding FIELDS OF table it_bsis
      where bukrs in so_bukrs and
            budat in so_budat and
            augdt = '00000000' and
            dmbtr ne 0.
    loop at it_bsis.
      select single * from bseg
         where bukrs = it_bsis-bukrs and
               belnr = it_bsis-belnr and
               gjahr = it_bsis-gjahr and
               buzei = it_bsis-buzei and
               ebeln in so_ebeln and
               matnr in so_matnr and
               hkont in so_hkont.
      if sy-subrc = 0.
          MOVE-CORRESPONDING BSEG TO BSIS_TAB.
          BSIS_TAB-WAERS = it_bsis-WAERS.
          BSIS_TAB-BUDAT = it_bsis-BUDAT.
          BSIS_TAB-BLART = it_bsis-BLART.
          IF it_BSIS-SHKZG = 'H'.
            BSIS_TAB-DMBTR = 0 - BSEG-DMBTR.
            BSIS_TAB-DMBE2 = 0 - BSEG-DMBE2.
            BSIS_TAB-DMBE3 = 0 - BSEG-DMBE3.
            BSIS_TAB-WRBTR = 0 - BSEG-WRBTR.
          ENDIF.
          APPEND BSIS_TAB.
      endif.
    endloop.

Avoid selecting BSEG within the it_bsis loop. BSIS will have huge data and when you do data selection for BSEG inside this loop things will only worsen.
My points:
BSIS:
1. Avoid 'INTO CORESSPONDING FIELDS OF" during the bsis table fetch. Instead define your target structure with the required fields and select only those fields from the BSIS table.
2. Make sure that only "Key fields" are used in your filter (where condition) for this BSIS table fetch.
3. I presume your company code in selection (so_bukrs) is a mandatory field. If not suggest for mandatory option.
BSEG:
To avoid selection of BSEG inside the bsis loop do the following.
1. Sort it_bsis by bukrs belnr gjahr buzei.
2. Move the contents of it_bsis into a temporary table of same structure, say it_bsis_tmp.
3. delete adjacent duplicates from it_bsis_tmp comparing bukrs belnr gjahr buzei.
4. Now use the below selection:
   select <fields required from bseg>
     from bseg
     into table it_bseg
     for all entries in it_bsis_tmp
where bukrs = it_bsis_tmp-bukrs and
belnr = it_bsis_tmp-belnr and
gjahr = it_bsis_tmp-gjahr and
buzei = it_bsis_tmp-buzei and
ebeln in so_ebeln and
matnr in so_matnr and
hkont in so_hkont.
if sy-subrc eq 0.
sort it_bseg by bukrs belnr gjahr buzei.
endif.
5. Modify your loop construct as below:
loop at it_bsis.
read table it_bseg into wa_bseg with key bukrs = it_bsis-bukrs
                                                              belnr = it_bsis-belnr
                                                              gjahr = it_bsis-gjahr
                                                              buzei = it_bsis-buzei
                                                              binary search transporting <required fields>.
if sy-subrc eq 0.
   move the required fields from wa_bseg to your BSIS_TAB.
BSIS_TAB-WAERS = it_bsis-WAERS.
BSIS_TAB-BUDAT = it_bsis-BUDAT.
BSIS_TAB-BLART = it_bsis-BLART.
IF it_BSIS-SHKZG = 'H'.
BSIS_TAB-DMBTR = wa_BSEG-DMBTR * -1.
BSIS_TAB-DMBE2 = wa_BSEG-DMBE2 * -1.
BSIS_TAB-DMBE3 = wa_BSEG-DMBE3 * -1.
BSIS_TAB-WRBTR = wa_BSEG-WRBTR * -1.
ENDIF.
APPEND BSIS_TAB.
endif.
endloop.

Excise Part 1 updation at the time of issue.

Hi,
I am having one requirement regarding RG23 A part 1 updation at the time of issue.
1) How the register part 1 updated at the time of goods issue.
2) I purchased one material from two different vendor. One is excise unit & other is non excise.
At the time of goods issue to shop floor how the system determine that this issue is from excisable material or non excisable material.And accrdingly how will update part 1 entries.
Every time i will go to J1I5 transaction for updation of RG23 A or it will update automatically.
Regards,
Dinesh

Hi Sathish ,
In CIN - basic settings - Maintain excise groups there in that outgoing excise invoice Excise invoice during the billing and Create and post inv in single make the both fields un mark.
Hope this will make you to create invoice and excise invoice separately, or els find if any exit is used earlier.
Check and revert
Regards
Ram

I think I solved my time changing issues- hope this helps

Hey everyone, I think I've had some success with my time changing issues. I originally posted this to another user as a follow up to her question, but I'm reposting it here. Hope it helps:
"msteinny,
So i went to the apple store to meet with an apple genius to ask him why my phone's time kept moving up 1 hour everytime I synced my phone. Well he said that he's never seen this problem before, and after a trying a reset and restore he let me exchange my phone. The problem is that when I went to sync my new phone the problem still persisted. They told me it was probably something to do with my computer and its time zone settings.
So I get home and click on my computers clock in the bottom right hand corner to bring up the date and time properties and sure enought my time is correct, the date is correct and the time zone is correct (Eastern Daylight Time). So I look through the different tabs (Date & Time, Time Zone, Internet Time). The first thing I tried to do was to change where my computer syncs its internet time. It was originaly set on NIST time. I then switched it to Windows time, but this didn't do anything. My clock would still change when I synced to itunes. The next thing I tried was fideling around in the Time Zone tabs. I noticed that the box that says "Automatically adjust clock for daylight savings" was unchecked, so I checked it and my computer's time jumped an hour ahead. So I left the box checked but moved my clock one hour back (to the correct time), clicked on apply and left it at that. I synced my iPhone and voila! The time didn't change! It stayed on the correct time! To to make a long story short, make sure that you computer's clock is set on "automatically adjust clock for daylight savings changes, make sure your time zone is correct, and that the time is right when that box is checked. I hope this helps you. I'm glad I got a new phone out of the deal;)
Chris P. "

As I mentioned in my post, whenever I checked that box the time would be incorrect. It would move up an hour. I've messed with this along time ago, way before I got my iphone. I think this had something to do with the daylight savings change that was implemented this year or last year. I dont remember if I never tried correcting it before, or if I couldn't, but this time I didn't have any problems correcting it. Anyway, since I couldn't correct it back then, I just left the box uncheck and decided that I would change the time manually when the next time change occurs. But it seems to work fine now so all is well.

The Java plugin has created a time unfriendly issue with my e-mail account, I can not open or send any e-mail without using this plugin, how can I eliminate this problem without dropping m. firefox?

A few days ago I tried to e-mail a friend, when I started A box came up and it required me to add a plugin..Java. I contacted my e-mail courier and microsoft, they told me that is was a plugin from Mozilla Firefox. Since then I must go through Java to send or open an e-mail... this is NOT to my satisfaction, it takes too long for all of this to open and if it is not cleared , I am dropping Mozilla and going elsewhere. Why has this occurred? Is this a result of the last update? If so can I delete the last update and continue on the other version?
== This happened ==
Every time Firefox opened
== last week

Sorry, I have no idea what you mean by '''"The Java plugin has created a time unfriendly issue with my e-mail account, I can not open or send any e-mail without using this plugin,"'''.
If you think your problem is caused by the Java plugin, you should visit the Java support forum for assistance.
http://forum.java.sun.com/index.jspa
If you could explain what you mean by '''"time unfriendly''' issue with my e-mail account", maybe we'll be able to help you solve that issue.
It might be helpful for us if we knew exactly which web-mail provider you are using. It seems strange to me that viewing or sending web-mail would actually "need" Java for operation, its more likely that some other item on the web page needs Java to run some advertising or other garbage that isn't a necessary part of the web-mail functionality you want to use.

FM - Budget check at the time of procurement and at the time of Issue

Hi
For a Material there is a budget for a procurement ( Check should happen at the time of procurement and a seperate budget for consumption ( Check should happen at the time of issue).How can I map this in FM- BCS.I am thinking of creating two commitmen items one for Procurement , to be derived thorugh matl grp at the time of PR / PO and One commitment item for consumption to be derived through consumption GL . Does it work , any comments?
Thanks in advance
Chris

Yes you are right , I have to make to sure stock budget doesn't get credited.
If you remember in one of my other threads, i wanted to derive commitment item from Matl grp, it was for this purpose. I will derive commitment through matl group at the time of procurement / GR etc and assign a dummy commitment item to stock a/cs. Where as i will derive a consumption commiment item from consumption GLs.
Thank you
Chris

Different G/L code at the time of issue for projects .

Dear all;
here there is requirement :
Say we are having three different WBS element .for a particular Material ,at the time of issue it should goes to different G/L Code.How to map this in SAP system .
I have configured in OBYC setting as below :
GBB
Valueation Modifier general Modifier valueation Class G/L account
1101 VBR 3000(Raw Mat) XYZ
Kindly give me some solut

Do you mean that every time you issue for a particular WBS element it should post to a differnt G/L account.
If thats you requirement then its not possible to post to a new G/L account every time when you are issuing a material.
The G/L account is determined based on the movement type, and creating new movement type every time to post into a G/L account is not feasible solution.
What you can do is post into a differnt cost object like a profit center or cost center to track down the costs by posting them at the time of Goods issue.
Thanks & Regards
Kishore

OTM - At the time of issue handling status is updated each time

Hello,
While handling the issue till the time it get fixed, each time the status gets updated but not maintaining the status history along with the description and solution. We need to figure out the status history .

Do you mean that every time you issue for a particular WBS element it should post to a differnt G/L account.
If thats you requirement then its not possible to post to a new G/L account every time when you are issuing a material.
The G/L account is determined based on the movement type, and creating new movement type every time to post into a G/L account is not feasible solution.
What you can do is post into a differnt cost object like a profit center or cost center to track down the costs by posting them at the time of Goods issue.
Thanks & Regards
Kishore

Filter Issues in P6.2.1

I am facing filter issues in P6.2.1. I used the customized filter for "Planned but Not Started". Below shown were the combination i used to create the filter. but when i run the filter no activities were shown under WBS, i mean empty WBS
1. Early Start - within a range of - PS - DD
Activity Status - Not Started.
2. Early Start - less than or equal to - DD
Activity Status - Not Started.

Hi,
My feeling is that perhaps you don't have any task that is late.
If not, please try following filter:
Start is less than or equals to DD
Activity staus not started yet
I hope it helps.
Regards,
Younus

Any report to identify Time Constraint issues?

Hello,
Is there a report that I can run to get the employees and Infotype records with time constraint issues? So until last week, we had not turned on the PC-UI switch in T77S0 table. So the way it worked was, if in history there were 2 records with time gaps for Infotype with time constraint = 1, then it still allowed us to create new records. Now with the switch turned on, it gives an error. Once the historic records are corrected, it allows us to proceed. This is freaking out a lot of data specialists, and we were wondering if we can proactively identify the employees with these historic data inconsistencies and be able to correct them. Please let me know.
Thanks,
Nakul

Found it: RPUSCNTC
Thanks,
Nakul

How to avoid Time out issues in Datapump?

Hi All,
Iam loading one of our schema from stage to test server using datapump expdp and impdp.Its size is around 332GB.
My Oracle server instance is on unix server rwlq52l1 and iam connecting to oracle from my client instance(rwxq04l1).
iam running the expdp and impdp command from Oracle client using the below commands.
expdp pa_venky/********@qdssih30 schemas=EVPO directory=PA_IMPORT_DUMP dumpfile=EVPO_Test.dmp CONTENT=all include=table
impdp pa_venky/********@qdsrih30 schemas=EVPO directory=PA_IMPORT_DUMP dumpfile=EVPO_Test.dmp CONTENT=all include=table table_exists_action=replace
Here export is completed and import is struck at below index building.After some time iam seeing below time out in log files
Processing object type SCHEMA_EXPORT/TABLE/INDEX/INDEX.
Error:-
VERSION INFORMATION:
TNS for Linux: Version 11.1.0.7.0 - Production
Unix Domain Socket IPC NT Protocol Adaptor for Linux: Version 11.1.0.7.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 11.1.0.7.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 11.1.0.7.0 - Production
Time: 13-JAN-2012 12:34:31
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12560
nt main err code: 505
TNS-00505: Operation timed out
nt secondary err code: 110
nt OS err code: 0
Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=170.217.82.86)(PORT=65069))
The above ip address is my unix client system(rwxq04l1) ip.
How to see oracle client system port number?
Please suggest me how to avoid this time out issues.Seems this time out is between oracle server and client.
Thanks,
Venkat Vadlamudi.

Don't run from the client ... run from the server
or
if running from a client use the built-in DBMS_DATAPUMP package's API.
http://www.morganslibrary.org/reference/pkgs/dbms_datapump.html

SOAP ADAPTER TIME OUT ISSUE

We are getting the data from sql server into PI through Soap adapter.
Till day before yesterday everything is running fine .But now it has started giving us the below error.
there were no changes done in the interface.
I am not able to see any error in the runtime workbench ,communication channel monitoring, message monitoring.
This below error is giving in sql server.
Can any PI expert explain or provide me a solution to solve this issue.
Msg 6522, Level 16, State 1, Procedure sp_PI_WS_Backflush_Production_V2, Line 0
A .NET Framework error occurred during execution of user-defined routine or aggregate "sp_PI_WS_Backflush_Production_V2":
System.Net.WebException: The operation has timed out
System.Net.WebException:
   at System.Net.HttpWebRequest.GetRequestStream()
   at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
   at PI_WS_Backflush_Production_V2.Backflush_OB_Sync_SIService.Backflush_OB_Sync_SI(BackflushRequest_DT BackflushRequest_MT)
   at PI_WS_Backflush_Production_V2.StoredProcedures.Backflush_Production_V2(String PalletNumber, String StockKeepingUnit, String ProductionPlant, String BatchNumber, DateTime ProductionDate, String Quantity, String UnitOfMeasure, String Destination, String& uState, String SAPUser, String SAPPassword)

Time out issue could be due to the long running process in your SQL server. please check the SQL server for its performance and also check the number of http worker threads on the SQL server side where the SOAP adapter makes the call and get the request back.

Time Machine issues (16030) sparsebundle" is already in use for Time Capsule backup

Time Machine issues (16030) sparsebundle” is already in use for Time Capsule backup process. Just started happeing been using it for over two years.

First, restart the computer and the Time Capsule. In most of the cases, this solve the problem.
If it doesn't work, see > http://pondini.org/TM/C12.html

Calendar Event Invites - Time Zone Issue

Hi all!
I just switched back to BlackBerry from iPhone, and love everything about it so far except one thing: time zone issues on calendar invites.
My work uses an OS X hosted CalDAV server, and I was able to sync my existing calendars to it without issue.
My time zone: Eastern
My coworkers timezone: Central
The Issue: I received an invite from a coworker, and on my Mac, it shows at 1PM Eastern, as it should. The invite was sent for 12PM Central. This same invite appears on my BlackBerry at 7AM Eastern.
Testing completed:
I added an invite on my BlackBerry for 6AM Eastern as a test, and it appeared on my Mac at the correct time without issue.
I added an event on another day from my Mac, and it synced to my BlackBerry without issue.
So it seems that my issue only exists when recieving event invites from others, possibly in different time zones.
My Mac and BlackBerry are both set to Eastern time.
My coworkers Mac and iPhone are set for Central time.
I looked all through the BB settings and cannot find anything that would account for this odd behavior.
I tried a battery pull - same results.
I am on the latest OS available for a Q10: 10.2.1.2976
Can anyone help with this? I would hate to have to go back to iOS for one issue like this, however, an accurate and reliable calendar is critical to my work.
Solved!
Go to Solution.

Try this, for a test.
Set your Q10 to GMT Timezone.
Open the calendar, your invtes should be ~5 hours ahead.
Set your TZ back to Eastern.
Check your specific event mentioned above which was at 7am Eastern.
Is it correct now?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Essbase Security Filter issue.

Hi,
Its regarding the security filter issue.
The major problem is whosoever user is provisioned under that security filter, if the user is trying to connect to Application using Excel Addin / Smartview, it crashes the essbase server [Network Error [10061], timed out error)]
When we figured out because of this filter essbase server is crashing, we tried to edit the filter. sometimes if we click on edit, it crashes the server or sometimes we can see some junk characters in the filter.
We have applied the security on Entities dimension and problematic filter is ASP.
Now the hirerachy is like this.
Entities dimesnsion and then ASP member and under ASP we have our several members.
Filter is like this:
Write : @Idescendants("ASP")
It was working fine for almost 15 days.
Now if i edit the filter, i can see like this:
Write : @Idescendants("ASP")
Metaread:@Idescendants("*&^%?)
Junk characters are coming in and no idea from where they are coming.
I can't delete the filter also, again it crashes the essbase server.
As a workaround i have created a temp filter and dome the assignation for this group, according to that.
Everything is working fine.
I just wanted to know, has anybody faced such kind of problem earlier.
What cud be the root cause for this.
How could I delete the filter.
I have also get messages like security file is corrupted (we have restored it from old backup) but really worried about security file as we are moving the whole thing to production server this weekend.
Please advise me on this, Please help me. Any help would be highly appreciated.
I am really in trouble.
Thanks,
Pankaj Mehta.

Try to edit the filter from MaxL command line using
alter filter sample.basic.filt7 add write on '@IDescendants("ASP")';
here sample=application
basic=database
filt7=filtername
have good luck

WRT54G time filter issue

Similar Messages

Maybe you are looking for