WRT54G v1.1 and buffalo Linkstation problems.. help needed

Hi there,
I have a wrt45G with dhcp running and working. Connecting the linkstation out of the box has no effect. Connecting the linkstation directy to the laptop works fine. I changed the config to a fixed IP outside of the DHCP range, but withing the router's range.
Connected it to the router again, No effect, the network line shows no sign of life.
Checked the cables, changed the cables, no effect.
I have abolutely NO idea what's wrong.
Please help, I hope someone has had similar stuff and solved it.
I have software version 1.42.2 and a wrt54G v1.1
Jan

Hi.. Try to change the wireless channel to 6, 9 or 11. Also change beacon interval to 50 and fragmentation and RTS thresholds to 2304. Well you seems to have very old fimrware on your router. I believe linksys has come out with version 4.30.5. You can also try to upgrade the firmware on your router.

Similar Messages

  • Airport Extreme Base Station N and Buffalo Linkstation

    I want to set up a Buffalo Linkstation with my Airport Extreme Base Station
    I have two options on the linkstation
    1. ethernet
    2. USB (female port)
    Can I use the NAS over ethernet? Or do I have to use USB? If I use USB will it work if both the linkstation and the base station have female ports.
    Will a USB with both male ends work? Who makes that?

    I've decided to use the drive as a network drive and I've gone into the control panel and changed all the folders to Mac/PC
    Can I use Backup to backup to a network drive? Or is there a better program?

  • Itunes and Mac Pro Problem -- Help Please

    Having a really strange problem and could use some help.
    I've got a Mac Pro with my wife's Ipod attached. Updating songs on the Ipod has become very, very slow. Literally, it's taking hours to move over a couple of albums.
    Just out of curiousity, I hooked it up to a Macbook Pro in the house and everything was just fine. Tried reinstalling itunes on the Mac Pro and it didn't do it the trick.
    All machines are intel based. Other peripherals are working fine.
    Any suggestions? Thanks.

    slow iPod report - MacFixit
    iPod Update 2004-07-15 (#4): Slow transfers after update, solutions; Another fix for mounting problems
    Why reformat iPod in Disk Utility
    iPod Discussions
    Mac Pro 2GHz 4GB 10K Raptor 23" Cinema   Mac OS X (10.4.8)   WD RE RAID DW 4.0 APC RS1500 Vista

  • I got render and RAM preview problems. help?

    i got render and RAM preview problems with after effects! please help me
    when i started on a project earlier today the RAM preview was failing and it stoped making a preview after about a second, when i hit the RAM preview buttom again it continued to load and stoped again after a half second, and it continued to do that till it wasn't loading at all, just playing the same thing up even doe it haden't loaded the whole composition! BUT if i moved the (thing you see where you are on the timeline in need of a better name) it started loading a little more and then it stoped again.. so after alot of problems and moving i managed to make a RAM preview of the whole composition..
    now the real problem: when i was done with my project and i was going to reender i did like this: i added my composition to the render queue, chosed my render settings and started to render, after exactly 37 frames it stoped and no window or anything poped up, the only thing that was telling me something was wrong was the render status, and it said: ''failed at 0;00;00;37'' that's not even a second! and BTW when i render after effects only uses 12% of my 6GB RAM memory.. i dont know what to do! i've tried other render settings but the same thing happens! can anyone help me?
    BTW i'm swedish and only 14 so i might misspelled something..

    Start here and make sure that you understand how RAM preview is supposed to work first:
    http://forums.adobe.com/thread/424030
    What version of After Effects? Have you installed the recent updates? What operating system? What kind(s) of source footage? Has this ever worked before? What other software are you running? Do you have any third-party effects or codecs installed? Are you rendering with OpenGL?
    What are your Memory & Multiprocessing settings? Are you using Render Multiple Frames Simultaneously multiprocessing?

  • Install problems - help needed desperately for new Java user

    I have been trying to install Java SE Development Kit 6 - Version 1.6.0_13. Initially I could not get the javac process to work no matter what I tried. After uninstalling and reinstalling numerous times I now have it so that my javac will rewrite my file from a .java to a .class file. Now when I try to execute my Hello.class file I am getting an error message....
    Error occurred during initialization of VM
    java/lang/NoClassDefFoundError: java/lang/Object
    Can anyone please help me fix this? I was really anxious to learn programming but all of these setbacks are really frustrating. I have basic books to help when I am up and running but nothing helps you with problems with installations.
    Please help!!!

    Enigmafae wrote:
    Thank you so much. Worked like a charm! I also installed from Explorer instead of Firefox. Maybe the Firefox installations were incompatible with my XP Environment????Worked fine for me... but I downloaded and then installed... I did NOT "run" the install over the network.
    I don't care I'm just so thrilled it worked. Now I can get to learning the actual programming that I have been trying to get to.
    Thx again for your help!I love it when a plan comes together.
    ~~ Hannibal.

  • Problems running both the *stock* 6600 and 7800GT card. Help needed!

    hi everyone,
    I recently picked up a 6600 gfx card to use as a s-video output for a TV monitor or beamer. I have a 7800GT (ordered with the G5) previous to the 6600 installation i was able to send a DVI or VGA signal from the 7800's second output. Now this no longer works.
    In my configuration I've hooked a projector (HP620) up using a DVI cable. Alternately a VGA cable. In both cases the HP620 shows up in the display prefs complete with the correctly set resolution but no signal appears on the projector. the mouse disappears off the screen *as if* the second screen is there. but that is all.
    I would like to get these cards working together. does anyone know of any known problem with compatibity?
    the only hookup that works is an s-video output via adapter cable from the 6600 to a TV. but this is not without problems. it seems to crash one specific pgm i use to generate visuals that bases it's render engine on core image units.
    i know both cards are Core Image compatible. what else could it be?
    thanks for ANY help!
    cheers
    fj

    here's a status update: in a nutshell
    benQ (siemens) MP620 projectors DO NOT work with G5 PCI Express desktops Macs.
    if you've followed this thread i'm sorry for all the reading to get to this point. i just took beamer and G5 to the store i bought them at and we tested all connections. in the end we discovered the benQ MP 620 (sorry not "HP" - that was a typo in the first post) will not work with the current G5 desktop models.
    i guess PCI express must have something to do with it. unfortunately i had to buy the darn projector to learn this. the company states (only after we called them up) they do not support the mac platform, and that it "may or may not work". if it works they can't explain why and vice versa... until now i never knew there was a difference! thought beamer is a beamer....
    anyhow, for what its worth. maybe it'll help someone. i spent several hours tracing this to find the answer....
    and it appears the issue of incompatibility between the two cards is a misnomer.
    cheers

  • Canon Rebel T3 EOS Flash and Auto Mode Problems: Help Me!

    I recently got a job as a photographer for the nightlife in my city. I went out and tried to shoot the other night. My camera isn't broken, but I had it in auto (green rectangle) and when I'd hit the shutter button, it would just flash, looking like it was having a seizure, and not take the picture. It eventually took the photos, but it flashed in their faces like 3 times before it actually took the photo. People cursed me out and it was awful. Why won't my camera just take the picture the first time??? Why does it say it's "busy" and how do I know when to take the photo to avoid pissing people off? Also, when I went to the "no flash" seting, it took the picture with no problem, but I absolutely NEED the flash to work. Please help me!

    Bob has nailed it.... when auto-focus is enabled and the camera is using "One Shot" mode (the default focus mode), the camera will NOT take a photo until it can confirm that it was able to lock focus.  To help the camera focus, it will attempt to use the pop-up flash and strobe it very quickly to create something which is more-or-less about 1 seconds worth of continuous light. You'll want an external speedlite flash for two reasons... 1)  Several external flash models include a "focus-assist" beam.2)  The external speedlite models are significantly more powerful than the built-in pop-up flash and can handle subjects at much greater distances. Normally I'd suggest a Canon Speedlite 430EX II... but Canon recently announced it replacement will be available in mid-septermber.  The 430EX III-RT ... and it's the same price (the new model has a radio receiver and can triggered via radio instead of optical (optical triggers require line-of-sight... radio does not.)  I'd much rather have the radio-eqiupped version. The focus-assist beam in the flash illuminates a red-pattern momentarily while the camera is focusing.  This beam allows the camera to focus even in total darkness.  It doesn't have to pulse the flash to work as a modeling light to achieve focus (it's actually much better than the 1-second long burst of light.) 

  • Ipad will not reboot and several other problems help please someone

    I have a similar problem but my ipad volume turns off by it self I have to continue to push the volume button up while my device it study turning the device down also I cant reboot my ipad are go to the community to post my problems im using the desktop to post this need help bad I do not have apple care and ive had my ipad for about 2 years now

    Have you tried connecting it to your computer and Restoring from your backup in iTunes?
    But it does sound like your power button is broken.

  • HT201335 Having problems with my apple tv connecting to my macbook, iphone 4s and iPad 2. Help Needed!

    I've just bought Apple TV and want to mirror whats on my screen on my macbook, iphone 4s and iPad 2 on to my tv screen but it's not working. I can't seem to find the airplay option at all on either of my devices and the logo when it is an option is also not appearing. Any help on this would be great!

    Is Airplay enabled on Apple TV? Are all devices up to date?
    What model is your computer, mirroring requires it to be 2011 or later. It also needs to be running 10.8
    Make sure router is up,to date and check settings.
    Also see
    http://support.apple.com/kb/TS4215

  • I want to make a chatroom using jsp, and have some problem, Help!

    I want to build a chatroom using jsp and client using plain html, so i need every client could have a constant connection with the web server and will receive messages realtime. But i got 2 problems.
    First, how can i turn my buffers off so that messages can get to the client the time it is meant to be. I added
    <@page buffer="none">
    but seems that it takes no effect, any tricks here? thx
    Second, I want every user could have a constant conn. with server but i dont want my server to waste resources on those connection that has already been disconnected.so is it possible to stop executing JSP pages once client has diconnected.Since i found that it will throw no exception writing to the client even if the connection is disconnected in JSPs.
    Thanks!!!!!

    By theway, i'm using TOMCat 5.0 as my JSP container.

  • Setting up iTunes and Buffalo Linkstation Live

    Anyone using this setup on Windows XP?
    Anyone know if I can connect directly to my iTunes content from my Apple TV? I have the pCast/DNLA server running.
    Thanks!

    I think I'm having a similar problem. AirTunes has been working fine for the last 6 months, but a reboot last week has killed it. iTunes can see and connect to my remote speakers. When I hit play, the play-button responds correctly, turning into a pause button. However, nothing comes out of the APX out and the timeline doesn't move. I can play out of my local speakers fine.
    At first I suspected that I might have disable a Windows service that was necessary for iTunes to play over the remote speakers. After a fresh install of WinXPPro and updates of APX firmware and iTunes, my symptoms are still the same.
    Funny thing is that everything works fine with my WinXPPro Dell notebook. That makes me think that there is nothing wrong with the APX. Any clues?

  • PX1268E-1G40 And Buffalo LinkStation Home NAS

    Hi,
    I bought a PX1268E-1G40 device to use as a backup drive for my home NAS (Buffalo Link Station HD-HG400LAN).
    Unfortunately while the NAS sees the attached USB device it can't use it as a backup device (or an external HDD). I originally spoke with Buffalo about this, and after trying many things they have asked is their any way of turning the "Auto Installation" mechanism off?
    On installation to my PC the PX1268E-1G40 shows as two devices a USB external HDD and a USB CD-ROM device (which contains the CD info). Is their *anyway of disabling* the USB CD-ROM so that it is not reported to an external systems (PC, NAS, etc)?
    Thank you,
    Mark

    Hi
    > On installation to my PC the PX1268E-1G40 shows as two devices a USB external HDD and a USB CD-ROM device (which contains the CD info). Is their anyway of disabling the USB CD-ROM so that it is not reported to an external systems (PC, NAS, etc)?
    I have some experience with such external HDD and to be honest its not possible to remove the external USB CD-Rom option from the My computer.
    As far as I know after connection to the notebook the small window has appeared asking for the password. As far as I know I have used the standard password 12345 or something like that.
    After successful password validation the USB HDD has appeared in My Computer.
    I have tried to disable this and to use the HDD without the software and CD-ROM option but it was not possible
    Seems you have to use it with the CD-ROM option in My Computer.
    Bye

  • Real Player, Windows Media Player and Quicktime plugin problems - HELP!

    All I want to do is view game trailers in different website in either real, wmv or mov etc. I have downloaded the programs (free ones) and installed them but they still persist not to work in the browsers. The program themselves work fine just not in the browsers where I use them the most. I have also checked the internet plugins file on my computer and they are in there. What can I do for them to work??
    HELP.

    ( OT) Hello, Tom Graves,
    Welcome Back !!!
    Quicktime works for us without Rosetta, I have not tried the other two.
    wmp & real player, though i hear there is alot of finagling for wmp,
    Regards,
    Eme :~{)
     Power PC G4 (3.3) ♥ iMac Flat Panel 10.3.9 ] 15 Alum.PowerBook Tiger   Mac OS X (10.4.6)   AEBS & iMac Intel Core Duo 2gb
    Message was edited by: Eme
    Message was edited by: Eme~ glad to see you are well, just really busy.

  • WRT54GS ver 6 and samsung phone problems

    hey,
    at my house we've used this and a wireless g adapter and it's worked awesome.
    but 
    i've just recieved my new phone it's pretty much brand new, it's a samsung (if that helps).
    when i try to connect my phone to the wireless network it spends ages connecting and then instantaneously disconnects.
    i think it's not my phones as i have connected to my gf's network fine. also her phone (same phone) connects at hers but not at mine.
    any ideas why i can't connect???

    now i done it. lol don't worry.
    i clicked around till it worked 

  • I download The new version of firefox and have a problem help

    I just upgrade to the new firefox and now when i close out the firefox window and open a new one it goes back the the site i was on before. it does not open to the home page

    If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
    Download a new copy of the Firefox program and save the DMG file to the desktop
    * Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Trash the current Firefox application to do a clean (re-)install
    * Install the new version that you have downloaded
    Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

Maybe you are looking for