WRT54G v6 Odd Problem

Hiya. I lurked these forums a bit and looked around but I did not really find my problem listed here. I will describe it as best as I could.
I was playing a game online when all of a sudden my Internet connection dropped. I looked at my modem, thinking perhaps my cable connection dropped (it WAS at about 4:00 (4:00 AM), and the cable company sometimes disconnects the service for a bit for maintenance or whatever. Hell if I know.
Anyways, my Internet connection was all lit up so I looked over to my router and the wired port #1 light was blinking. Not normal "activity" blinking, but blinking on and off very slowly, about once per second.
I have two computers hooked up to my router and did a little testing... I plugged in computer #2 into all four ports and the lights were just fine. I plugged Computer #1 into all four ports and there was a problem. When computer #1 was in ports 3 and 4, it worked fine. But when it was in ports 1 or 2, the light blinked in the fashion I just described.
I tried reinstalling the router, reinstalling my network card, and upgrading the firmware. Nothing worked. (I called tech support but my P.O.S. cell phone dropped the call. >: )
Nothing worked. I mean, I could get both computers working fine by plugging it in another port, but Hell if I was going to let this problem stick around.
Now I am a computer repair technician. I did every conceivable option aside from reinstalling Windows (it was basically a fresh install, I doubt that was the problem) and nothing worked.
As I was browsing the forums over here I noticed that my model, the WRT54G, has a lot of problems. Bah. Anyway, after about an hour total of the lil' blinky problem, it just stopped on its own.
I was just wondering if anyone knew what this was and if it happened to anyone else. Thanks.

The only thing that I believe that you can do is reinstall the correct firmware in the language that you want. Below is an firmware upgrade link.
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=4030&p_created=11601...
Good Luck,
Ttech

Similar Messages

Odd problems with reading DVD media [concluded]

There is an odd problem I've encountered...(I'm not sure if its a bug with Arch Linux or Linux in general).
Firstly, the details:
* I've updated the systems (using "extra", "current", and "community" respositories). So its the current one (0.80 "Voodoo"). I'm NOT using "Unstable" respository.
* I've already added the user to the "optical" and "storage" groups. So there's no problems in relations to permissions.
* My fstab entries for the CD and DVD drives are default (I didn't touch them)...That is, "iso9660" and "udf" respectively.
* My desktop environment is KDE 3.5.5...And I have changed the behaviour of the desktop icons such that DVD media, CD media, and USB devices will have an icon pop-up as soon as you plug them in.
* I have "hal" loaded in the DAEMONS of /etc/rc.conf
* I'm using 4 different Linux systems with the following DVD burners.
=> Pioneer DVR-108
=> Sony DW-Q120A
=> Hitachi-LG GCC-4240N (DVD-ROM/CD-burner combo)
* There are three Sempron 2800+ (Socket 754, 1.6Ghz) boxes and the last one is on an IBM R40 ThinkPad, and I know you can't read DVD-R media on that. But it should be able to read DVD+R media without issue.
* Two of the Semprons are running Arch, as well as the ThinkPad. The final Sempron box is running Ubuntu 6.06.1
* When I installed K3b I did: pacman -S k3b dvd+rw-tools
* All the DVD media is Verbatim DataLifePlus ones.
Here's what I've done...
I've burnt two DVD media (they're just video files from last year's Blender 2006 conference thing, so its legal stuff).
One is a DVD+R and the other is DVD-R media. Both were done on a Windows 2000 Pro SP4 box using Nero 6.6.1.4
What's the problem?
Well, KDE in the Arch Linux boxes doesn't recognise the media!...There is no DVD icon that automatically pops up on any of the Arch Linux boxes!
When I run dmesg on the Arch boxes, the only relevant info I get is:
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
Now if I re-insert these DVD media onto an Ubuntu 6.06.1 LTS box...The DVD+R works perfectly! While the DVD-R does not.
When I run dmesg on this box, I get the following:
[17179654.808000] hdc: cdrom_decode_status: status=0x51 { DriveReady SeekComplet e Error }
[17179654.808000] hdc: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[17179654.808000] ide: failed opcode was: unknown
[17179654.808000] hdc: cdrom_decode_status: status=0x51 { DriveReady SeekComplet e Error }
[17179654.808000] hdc: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[17179654.808000] ide: failed opcode was: unknown
[17179654.808000] hdc: cdrom_decode_status: status=0x51 { DriveReady SeekComplet e Error }
[17179654.808000] hdc: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[17179654.808000] ide: failed opcode was: unknown
[17179654.812000] hdc: cdrom_decode_status: status=0x51 { DriveReady SeekComplet e Error }
[17179654.812000] hdc: cdrom_decode_status: error=0x40 { LastFailedSense=0x04 }
[17179654.812000] ide: failed opcode was: unknown
[17179654.812000] hdc: DMA disabled
[17179654.812000] hdc: ide_intr: huh? expected NULL handler on exit
[17179654.860000] hdc: ATAPI reset complete
[17179655.364000] ISO 9660 Extensions: Microsoft Joliet Level 3
[17179655.412000] ISOFS: changing to secondary root
[17179725.140000] Unable to identify CD-ROM format.
[17179729.348000] Unable to identify CD-ROM format.
[17181395.032000] ISO 9660 Extensions: Microsoft Joliet Level 3
[17181395.032000] ISOFS: changing to secondary root
If I re-burn the data onto a DVD+RW, Arch and Ubuntu immediately sees it, and KDE (or Gnome in Ubuntu), will have a DVD icon popping up! I can view the video clips without issue!
Now here's the really odd part...
When I load up K3b on either Arch OR Ubuntu, they recognise all DVD media! (As in, they can read the media disc information!)...Tools => DiskInfo
If I click on the PIONEER - DVD-RW DVR-108 on the tree menu on the left side in K3b, (to view the contents of the DVD-R or DVD+R media), it can't read and pops up an error message informing about a read problem. It suggests I try dmesg|tail to see what's wrong.
When I do that, I get...
# dmesg|tail
grow_buffers: requested out-of-range block 18446744073708569376 for device hdc
UDF-fs: No partition found (1)
grow_buffers: requested out-of-range block 18446744073708569376 for device hdc
UDF-fs: No partition found (1)
grow_buffers: requested out-of-range block 18446744073708569376 for device hdc
UDF-fs: No partition found (1)
grow_buffers: requested out-of-range block 18446744073708569376 for device hdc
UDF-fs: No partition found (1)
grow_buffers: requested out-of-range block 18446744073708569376 for device hdc
UDF-fs: No partition found (1)
I repeat the same procedure on DVD+RW, and it works perfectly!
Should I use another burning application instead of Nero on the Windows box?
Could it be the way I burn things?
(Some DVD+R and DVD-R are burnt with multisession while others aren't.)
Has anyone else experienced similar issues?
What are your "workarounds" or fixes?

It *should* work...But they don't.
I tried this...
mount -t auto /dev/dvd /mnt/dvd
I get this...
mount: block device /dev/dvd is write-protected, mounting read-only
mount: wrong fs type, bad option, bad superblock on /dev/dvd,
missing codepage or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
I then do dmesg|tail
grow_buffers: requested out-of-range block 18446744073708569376 for device hdc
UDF-fs: No partition found (1)
If I try this...
mount -t iso9660 /dev/dvd /mnt/dvd
I get this...
mount: block device /dev/dvd is write-protected, mounting read-only
mount: wrong fs type, bad option, bad superblock on /dev/dvd,
missing codepage or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
I then do dmesg|tail
Unable to identify CD-ROM format.
If I stick in a DVD-R that is burnt in one go without multisession, I get this in the dmesg
UDF-fs: Partition marked readonly; forcing readonly mount
UDF-fs INFO UDF 0.9.8.1 (2004/29/09) Mounting volume 'SW', timestamp 2006/11/07 19:37 (1000)
It reads this disc perfectly and KDE pops up a DVD icon.
I'm scratching my head as I'm not sure what is the problem.
Could it be hal or the way the DVD media was formatted?

An odd problem when error handling

hi experts
I encountered a very odd problem when trying to show up an error message... and hope someone can help me out.
I defined a standard action in the view, and wrote some lines of code to check the input data in the predefined methodWDDOBEFOREACTIONwhich will call a method from component controller, and that method will call message_mananger->report_t100_message to show up an E type message if any error happened. But the problem is the program does not stop there but go into the action handler(ONACTIONACT_XXX).
I think it should actually stop and show up the message rather than get into the action handler because of the action is standar...
can anyone help?
many tkx

hi,
i went through your code.....the code is fine but as you told that it goes to the exception handler after coming to the message part ...this is because you are using
CALL METHOD LO_MESSAGE_MANAGER->REPORT_T100_MESSAGE
EXPORTING
    MSGID                     =
    MSGNO                     =
    MSGTY                     =
   P1                        =
   P2                        =
   P3                        =
   P4                        =
   MSG_USER_DATA             =
   IS_PERMANENT              = ABAP_FALSE
   SCOPE_PERMANENT_MSG       = CO_MSG_SCOPE_CONTROLLER
   VIEW                      =
   SHOW_AS_POPUP             =
   CONTROLLER_PERMANENT_MSG =
   MSG_INDEX                 =
   CANCEL_NAVIGATION         =
   ENABLE_MESSAGE_NAVIGATION =
RECEIVING
    MESSAGE_ID                =
this function will simply report that message but will not hold the control to the same screen..
so use
CALL METHOD LO_MESSAGE_MANAGER->REPORT_FATAL_ERROR_MESSAGE......
and tell me whether it solved the problem or not....
@ sarbjeet i think that Raise_T100_error is an obselete function...rite?
thanks and regards,
sahai.s

Premier 7 Odd problem

This may be something someone out there can clue me in on !!! I am capturing from a non digital cam and using another program to capture and then getting the clips from that program into Premier , this part is no problem as long as I save to my PC as soon as I save to my external and try importing to premier , premier tells me it does not recognize the file why is that?? how can I change that?/

Good Day Hunt , happy thanksgiving to all!! I have tried the Gspot and the same codec comes up for both places of storage on my PC it comes as DIB(_RGB And On The Maxtor stirage device it is the same DIB(_RGB also states no codec needed Do Not know waht it all means but I go back to what You said earlier that the external HD is The problem , Is there an external that can handle this or all the same ?? John
From The Home Of JC & M
Date: Thu, 8 Oct 2009 18:50:15 -0600
From: [email protected]
To: [email protected]
Subject: Premier 7 Odd problem
OK, you have used the Corel program, so you have a file to test with. Get http://www.headbands.com/gspot and install it. When you open it, give it time to survey your system for properly installed CODEC's. Then, drag one of the Corel files to it, and read the details.
You might be able to get this info right from Corel, though probably not in great detail.
Here's a look at the G-Spot GUI.
http://forums.adobe.com/servlet/JiveServlet/showImage/12983/G-Spot_Screen_02.jpg
Good luck,
Hunt
>

G4 Sawtooth odd problems

I have an older G4 Sawtooth. It has an upgraded processor at 1ghz and 1.3 gig ram. I've upgraded the hard drives with a 60 G and a 120 G drives. There is also a pci ethernet card installed.
I moved recently, and the tower stayed in a box for a few months. I have it up and running, but am now experiencing an odd problem. The drop down menus in all programs other than finder, do not work. I've tried disk utility and Techtool Pro. Disk utility looses contact with the 60G HD I have the operating system on. I didn't have much yet on the 120 G, so I tried to install in that, and there were 'errors.' Techtool will only try to boot, but will never actually load.
I haven't tried resetting PRAM, but I will try. Any other ideas. Help
Thanks

Well, it still has the original battery in the computer, so i will change it today. I don't believe that is the problem though, or only problem.
I installed the OS the other HD and it is working fine. I then tried to run Mac disc utility on the main drive and got the following.
Missing thread record (id = 4871)
Checking multi-linked files.
Checking Catalog hierarchy.
Invalid volume directory count
(It should be 48514 instead of 48515)
Invalid volume file count
(It should be 193965 instead of 193968)
Checking volume bitmap.
Checking volume information.
Repairing volume.
Missing directory record (id = 4871)
The volume Mac HD could not be repaired.
Error: The underlying task reported failure on exit (-9972)
My Techtool Pro CD doesn't seem to want to load. Any ideas?
I didn't remove all the video card, but I did make sure all the connections were secure inside.
Thank you

An odd problem importing footage...ideas please!!

I'm having an odd problem with iMovie that has me stumped so far. I'm currently using a borrowed DVcamcorder to import my footage. So far I can only import footage that was taped using that exact camcorder. I have other footage, (also miniDV format) that was created on a different camera, and it won't import properly. It comes out very jumpy, almost as if the frame rate is off or it's not scanning the fields properly, playing only every other one. The camera also gives me a "clean heads" message that only appears when I try to use the "foreign" video. The heads don't need cleaning, and I've checked the frame rate. Does anyone have any ideas? I'm lost so far!!
I'm using an iMac G5, with iMovie HD.
Thank-you!

Welcome to iMovie Discussions!
It may be that the "foreign" tape (..i.e; not recorded in that camcorder you're using..) was recorded at LP (Long Play) - a slow tape speed - or even slower than LP.
This makes recordings on extremely narrow video tracks (..because the tape hardly moves forwards while the spinning recording head turns round..) which may not quite co-incide with the exact head position of another camcorder ..i.e; the tolerance is too fine to match properly.
Most manufacturers mention this ..in very obscure language.. in their camcorder manuals, saying that LP tapes from other camcorders might not play properly, or tapes recorded in LP mode might not play in other camcorders.
Most (all?) Sony DV camcorders will play back footage recorded faster than normal, on 'professional' 'DVCAM' recorders. These tapes move faster through the camera than ordinary DV, so they produce a wider track which is less likely to cause signal 'drop-out' failure. I don't know if other makes of camcorder can play back DVCAM material.
If the "foreign" tapes were shot at DVCAM speed (..e.g; on a Sony PDX10 camcorder, or similar), then although they should play back in other, normal 'domestic' Sony cams, they might not play back in another make of camcorder. Could these be DVCAM tapes?
Finally, it might also be that the "foreign" tape really is a Foreign tape: i.e; the recording was made to a different standard. So if it's an American-recorded (NTSC) tape and it's played in a UK (PAL TV system) camcorder, the frame-rate will be wrong, the number of scan-lines will be wrong, the colour info will be wrong, etc. [..But as you mention "fields", you probably know enough not to have made that mistake.]
NOTE: Ooops, sorry, Karl: we must have both been typing at the same time ..didn't mean to step on your toes.

Odd Problem With MDT 2012 Deployment

Disclaimer: I'm an MDT n00b and barely know how to do anything other than the basics.
The odd problem: Computers that I deploy Windows 7 to using MDT will NOT (after deployement is complete) pass credentials to our proxy (Smoothwall - NTLM Authentication) and cannot not access the internet. It doesn't matter the flavor of Windows
7: 32bit/64bit or Pro/Ultimate same result. Does this on an unpatched machine with only IE8 or a fully patched machine with IE9. I've diddled all the security and connection settings in IE that I know to diddle with the same result. And it's not
just an IE problem. It does it with Firefox, too. Now getting to intranet sites is no problem... this is strictly an internet proxy authentication issue.
Now... why am I asking the MDT forum about this? Because I can load Windows 7 the old fashioned way with a DVD made from the same ISO that I used when setting up MDT and it works fine.
So MDT must be doing something differently when deploying Win 7. As a side note, when I deploy Windows 8 using MDT we do not have this issue. Maybe Microsoft just wants me to upgrade? :)
Everything else about the computer seems quite normal. No undetected drivers. Windows activates normally. I can join the domain either during or after the process. Install applications automatically. I mean the whole MDT process
seems to be working great otherwise.
Help? Please?

Yes, I found a way to undo this in my environment without needing to reimage all of the computers.
There are two problems:
1. GP items in the Administrative Template were modified.
2. GP items in the Security section were modified.
Problem 1
To address problem #1 delete the folder "%SystemRoot%\System32\GroupPolicy":
rd /s /q "%SystemRoot%\System32\GroupPolicy"
Problem 2
To address problem #2, it gets a little more complicated since there is no easy way to "revert" to the default in Win7. The only workaround is to import new settings. To accomplish this, I ran the following from a FRESHLY installed non-domain
joined computer that did not have the local GPO pack applied:
secedit /export /cfg secConf.inf
Then on the "bad" system that had the local GPO applied, I ran:
secedit /configure /db secedit.sdb /cfg secConf.inf /overwrite /quiet
I also found that I needed to delete the following keys since they did not exist on my safe/good image:
reg delete "HKLM\Software\Microsoft\Windows\CurrentVersion\Policies\System" /v "DisableCAD" /f
reg delete "HKLM\System\CurrentControlSet\Control\Lsa" /v "LmCompatibilityLevel" /f
reg delete "HKLM\System\CurrentControlSet\Control\Lsa" /v "SCENoApplyLegacyAuditPolicy" /f
And for some reason (and this was not consistent), I also found that I needed to delete the following on some systems:
reg delete "HKLM\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\AU" /f
Full Solution
Here is everything I ran against my "bad" systems that were domain joined in production use:
Batch File
rd /s /q "%SystemRoot%\System32\GroupPolicy"
secedit /configure /db secedit.sdb /cfg "%~dp0SecurityPolicies-Defaults.inf" /overwrite /quiet
reg delete "HKLM\Software\Microsoft\Windows\CurrentVersion\Policies\System" /v "DisableCAD" /f
reg delete "HKLM\System\CurrentControlSet\Control\Lsa" /v "LmCompatibilityLevel" /f
reg delete "HKLM\System\CurrentControlSet\Control\Lsa" /v "SCENoApplyLegacyAuditPolicy" /f
reg delete "HKLM\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\AU" /f
SecurityPolicies-Defaults.inf
[Unicode]
Unicode=yes
[System Access]
MinimumPasswordAge = 0
MaximumPasswordAge = 42
MinimumPasswordLength = 0
PasswordComplexity = 0
PasswordHistorySize = 0
LockoutBadCount = 0
RequireLogonToChangePassword = 0
ForceLogoffWhenHourExpire = 0
NewAdministratorName = "Administrator"
NewGuestName = "Guest"
ClearTextPassword = 0
LSAAnonymousNameLookup = 0
EnableAdminAccount = 1
EnableGuestAccount = 0
[Event Audit]
AuditSystemEvents = 0
AuditLogonEvents = 0
AuditObjectAccess = 0
AuditPrivilegeUse = 0
AuditPolicyChange = 0
AuditAccountManage = 0
AuditProcessTracking = 0
AuditDSAccess = 0
AuditAccountLogon = 0
[Registry Values]
MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Setup\RecoveryConsole\SecurityLevel=4,0
MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Setup\RecoveryConsole\SetCommand=4,0
MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Winlogon\CachedLogonsCount=1,"10"
MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Winlogon\ForceUnlockLogon=4,0
MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Winlogon\PasswordExpiryWarning=4,5
MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Winlogon\ScRemoveOption=1,"0"
MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\System\ConsentPromptBehaviorAdmin=4,5
MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\System\ConsentPromptBehaviorUser=4,3
MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\System\DontDisplayLastUserName=4,0
MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\System\EnableInstallerDetection=4,1
MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\System\EnableLUA=4,1
MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\System\EnableSecureUIAPaths=4,1
MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\System\EnableUIADesktopToggle=4,0
MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\System\EnableVirtualization=4,1
MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\System\FilterAdministratorToken=4,0
MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\System\LegalNoticeCaption=1,""
MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\System\LegalNoticeText=7,
MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\System\PromptOnSecureDesktop=4,1
MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\System\ScForceOption=4,0
MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\System\ShutdownWithoutLogon=4,1
MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\System\UndockWithoutLogon=4,1
MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\System\ValidateAdminCodeSignatures=4,0
MACHINE\Software\Policies\Microsoft\Windows\Safer\CodeIdentifiers\AuthenticodeEnabled=4,0
MACHINE\System\CurrentControlSet\Control\Lsa\AuditBaseObjects=4,0
MACHINE\System\CurrentControlSet\Control\Lsa\CrashOnAuditFail=4,0
MACHINE\System\CurrentControlSet\Control\Lsa\DisableDomainCreds=4,0
MACHINE\System\CurrentControlSet\Control\Lsa\EveryoneIncludesAnonymous=4,0
MACHINE\System\CurrentControlSet\Control\Lsa\FIPSAlgorithmPolicy\Enabled=4,0
MACHINE\System\CurrentControlSet\Control\Lsa\ForceGuest=4,0
MACHINE\System\CurrentControlSet\Control\Lsa\FullPrivilegeAuditing=3,0
MACHINE\System\CurrentControlSet\Control\Lsa\LimitBlankPasswordUse=4,1
MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinClientSec=4,536870912
MACHINE\System\CurrentControlSet\Control\Lsa\MSV1_0\NTLMMinServerSec=4,536870912
MACHINE\System\CurrentControlSet\Control\Lsa\NoLMHash=4,1
MACHINE\System\CurrentControlSet\Control\Lsa\RestrictAnonymous=4,0
MACHINE\System\CurrentControlSet\Control\Lsa\RestrictAnonymousSAM=4,1
MACHINE\System\CurrentControlSet\Control\Print\Providers\LanMan Print Services\Servers\AddPrinterDrivers=4,0
MACHINE\System\CurrentControlSet\Control\SecurePipeServers\Winreg\AllowedExactPaths\Machine=7,System\CurrentControlSet\Control\ProductOptions,System\CurrentControlSet\Control\Server Applications,Software\Microsoft\Windows NT\CurrentVersion
MACHINE\System\CurrentControlSet\Control\SecurePipeServers\Winreg\AllowedPaths\Machine=7,System\CurrentControlSet\Control\Print\Printers,System\CurrentControlSet\Services\Eventlog,Software\Microsoft\OLAP Server,Software\Microsoft\Windows NT\CurrentVersion\Print,Software\Microsoft\Windows NT\CurrentVersion\Windows,System\CurrentControlSet\Control\ContentIndex,System\CurrentControlSet\Control\Terminal Server,System\CurrentControlSet\Control\Terminal Server\UserConfig,System\CurrentControlSet\Control\Terminal Server\DefaultUserConfiguration,Software\Microsoft\Windows NT\CurrentVersion\Perflib,System\CurrentControlSet\Services\SysmonLog
MACHINE\System\CurrentControlSet\Control\Session Manager\Kernel\ObCaseInsensitive=4,1
MACHINE\System\CurrentControlSet\Control\Session Manager\Memory Management\ClearPageFileAtShutdown=4,0
MACHINE\System\CurrentControlSet\Control\Session Manager\ProtectionMode=4,1
MACHINE\System\CurrentControlSet\Control\Session Manager\SubSystems\optional=7,Posix
MACHINE\System\CurrentControlSet\Services\LanManServer\Parameters\AutoDisconnect=4,15
MACHINE\System\CurrentControlSet\Services\LanManServer\Parameters\EnableForcedLogOff=4,1
MACHINE\System\CurrentControlSet\Services\LanManServer\Parameters\EnableSecuritySignature=4,0
MACHINE\System\CurrentControlSet\Services\LanManServer\Parameters\NullSessionPipes=7,
MACHINE\System\CurrentControlSet\Services\LanManServer\Parameters\RequireSecuritySignature=4,0
MACHINE\System\CurrentControlSet\Services\LanManServer\Parameters\RestrictNullSessAccess=4,1
MACHINE\System\CurrentControlSet\Services\LanmanWorkstation\Parameters\EnablePlainTextPassword=4,0
MACHINE\System\CurrentControlSet\Services\LanmanWorkstation\Parameters\EnableSecuritySignature=4,1
MACHINE\System\CurrentControlSet\Services\LanmanWorkstation\Parameters\RequireSecuritySignature=4,0
MACHINE\System\CurrentControlSet\Services\LDAP\LDAPClientIntegrity=4,1
MACHINE\System\CurrentControlSet\Services\Netlogon\Parameters\DisablePasswordChange=4,0
MACHINE\System\CurrentControlSet\Services\Netlogon\Parameters\MaximumPasswordAge=4,30
MACHINE\System\CurrentControlSet\Services\Netlogon\Parameters\RequireSignOrSeal=4,1
MACHINE\System\CurrentControlSet\Services\Netlogon\Parameters\RequireStrongKey=4,1
MACHINE\System\CurrentControlSet\Services\Netlogon\Parameters\SealSecureChannel=4,1
MACHINE\System\CurrentControlSet\Services\Netlogon\Parameters\SignSecureChannel=4,1
[Privilege Rights]
SeNetworkLogonRight = *S-1-1-0,*S-1-5-32-544,*S-1-5-32-545,*S-1-5-32-551
SeBackupPrivilege = *S-1-5-32-544,*S-1-5-32-551
SeChangeNotifyPrivilege = *S-1-1-0,*S-1-5-19,*S-1-5-20,*S-1-5-32-544,*S-1-5-32-545,*S-1-5-32-551
SeSystemtimePrivilege = *S-1-5-19,*S-1-5-32-544
SeCreatePagefilePrivilege = *S-1-5-32-544
SeDebugPrivilege = *S-1-5-32-544
SeRemoteShutdownPrivilege = *S-1-5-32-544
SeAuditPrivilege = *S-1-5-19,*S-1-5-20
SeIncreaseQuotaPrivilege = *S-1-5-19,*S-1-5-20,*S-1-5-32-544
SeIncreaseBasePriorityPrivilege = *S-1-5-32-544
SeLoadDriverPrivilege = *S-1-5-32-544
SeBatchLogonRight = *S-1-5-32-544,*S-1-5-32-551,*S-1-5-32-559
SeServiceLogonRight = *S-1-5-80-0
SeInteractiveLogonRight = Guest,*S-1-5-32-544,*S-1-5-32-545,*S-1-5-32-551
SeSecurityPrivilege = *S-1-5-32-544
SeSystemEnvironmentPrivilege = *S-1-5-32-544
SeProfileSingleProcessPrivilege = *S-1-5-32-544
SeSystemProfilePrivilege = *S-1-5-32-544,*S-1-5-80-3139157870-2983391045-3678747466-658725712-1809340420
SeAssignPrimaryTokenPrivilege = *S-1-5-19,*S-1-5-20
SeRestorePrivilege = *S-1-5-32-544,*S-1-5-32-551
SeShutdownPrivilege = *S-1-5-32-544,*S-1-5-32-545,*S-1-5-32-551
SeTakeOwnershipPrivilege = *S-1-5-32-544
SeDenyNetworkLogonRight = Guest
SeDenyBatchLogonRight =
SeDenyInteractiveLogonRight = Guest
SeUndockPrivilege = *S-1-5-32-544,*S-1-5-32-545
SeManageVolumePrivilege = *S-1-5-32-544
SeRemoteInteractiveLogonRight = *S-1-5-32-544,*S-1-5-32-555
SeImpersonatePrivilege = *S-1-5-19,*S-1-5-20,*S-1-5-32-544,*S-1-5-6
SeCreateGlobalPrivilege = *S-1-5-19,*S-1-5-20,*S-1-5-32-544,*S-1-5-6
SeIncreaseWorkingSetPrivilege = *S-1-5-32-545
SeTimeZonePrivilege = *S-1-5-19,*S-1-5-32-544,*S-1-5-32-545
SeCreateSymbolicLinkPrivilege = *S-1-5-32-544
[Version]
signature="$CHICAGO$"
Revision=1
Thanks to Darren Mar-Elia for leading me in the right direction with this.
Good luck!

K7T266Pro2 odd problem

Hi all, i have an odd problem thats driving me to distraction.
Firstly i am using Winxp pro, with 512MB ram, xp cpu 2000+ and 3 hard disks plus other cards etc..
now i had an old 3d prophett ddr dvi card, which appeared to be ok, but a bit slow, so i went out and bought a brand new (boxed) creative geforce 4 mx 420 video card, inserted it, and the pc upon starting beeped 8 times, the display remained dark yet the hard disks appeared to be loading, i then reinserted the prophett and all ok, reinsert the creative card and same error.
apparently it is the memorry on the video card, but hwy? what is causing this, and yes i have flashed the bios to the latest release..

and also..
now i play around with it some more, sometimes when it does boot, it distorts the blocks around on screen, which if my memorry serves me is a video card memorry leakage problem, as the card is half a day old, i think i will take it back to the shop tomorrow with my base unit and demonstrate it in situ, alsomeans if they do swop the card i can see the frikin thing working rather than swop a duff for a duff
i also reinstalled my old 3d prophett which now loaded windows fine with no bluescreen, i think i got sold a duff card, but if anyone can explain why the beeps id be greatful..

FIXED! K8N Plat. SLI: Odd problem Did Reformat Now Won't Post...:/

Heeeellloo MSI community! After all the madness I went through; I followed up on wevsspot's link (see his post) & read the bejeebus outta this thread here.
NOTE: The above link is for all NForce 3/4 Mobo owners w/ RAID problems attempting a reformat/upgrade using Window's XP and then suffering an UNENDING cycle of "quick-flash BSOD + auto reboot" assualts...!
In brief, the solution is:
1) Make a slip-streamed OS CD w/ Nvidia's Nforce 6.70 RAID drivers (or latest version) integrated using Nlite. (not sure about Autostreamer...)
-1) But before that, you must have the latest Bios flashed or these "new" Nvidia drivers won't be recognized during OS installation!
The link above is VERY informative & I would not be here yapping about if it wasn't for the sleuthing abilities of one wevsspot!
Cheers to Indigian & all who've taken the time to post!
Evening all. I usually don't come for help but I feel I've earned a second opinion after working on my PC for 3 days. After all I've done, this issue is really beginning to worry me. On Friday I was playing some SP BF2 and then my PC suddenly restarted. So I started up again & shut down normally and then I fired up CS: Source, after a few maps, another restart.
Hmm, then I uninstalled Nvidia's current graphics drivers and installed the previous version. Tried CS, same outcome. Well, I have reformated my PC before w/ success so I figured "its been several months" & now this issue surfaces so why not?
Well, I backed up and dived in. Had my original MSI Raid driver floppy ready but there was an error so I followed MSI's directions here & loaded up a new floppy and things went fine (I tried both versions- the version at that link & the most current Raid driver version, 5.53 via Nvidia's site. However, for both versions, the file "nvatabus.inf" in which MSI claims to be there is no where to be found). Now fasy-forward to the 1st Window's loading screen (loading bars...) after OS installation, I see a BSOD flash and then restart, and restart, etc...
Facts & POE attempts in no particular order:
-My Bios is the original, 3.1. Apart from the problems I've read here, I have never upgraded it being that I've never really had to.
-I've noticed that rite after OS installation, where I see my status of my Raid config., the version is still 4.81... & then, the damn restarting begins...
-I have tried switching serial ports from 3 & 4 to 1 & 2. Also disabling the unused ports in the Bios after switching. As I switched ports for the 1st time, I even deleted my Raid config. and built a new one.
-I have tried unpluging my pata cables, unpluging my USB devices, & unseating my memory as mentioned in a several threads I read here about seeing a BSOD just before Windows loads.
-Whenever I reformated, I had to remove one of my BFG cards and thus "flipping" over the SLI chip on the mobo. I learned that XP wouldn't load my SLI rig on its 1st run...
-I tried installing XP originally w/ SP1 or slipstreamed w/ SP2, no go.
-Inbetween these hairpulling attemps @ process of elimation, I tried just one of my Maxtors w/ no floppy help and it WORKED. So that points me to this being a Raid issue.
I apologise for the wall of text. I think I have tried all avenues to getting this odd problem fixed. Any advice or instructions would be great. Thanks for reading.

Cowbell,
During your chipset drivers update (or even possibly during the Windows OS install routine itself) you may have corrupted your original Raid Array. My suggestion would be to enter your Raid Setup Bios and delete the existing array the build one from scratch. If you have another computer, extract the RAID drivers from the original MSI setup CD that came with your motherboard and put them on a floppy. Or if you so choose you could use the RAID drivers from a later chipset driver pack. I'll leave that up to you. After you rebuild your RAID array, turn off computer, turn off power supply, remove power cord from power supply,remove m/b battery and move CMOS jumper pin to the clear position. Leave it like that for at least 10 minutes. Move CMOS jumper back to save position. Reinstall motherboard battery and connect power back to your power supply. Reboot and enter BIOS again. Re-enable the SATA or IDE ports you are using for your array, enable RAID in the BIOS. Exit, reboot and enter RAID Bios setup again, make sure your RAID array is present and make sure it is set as a bootable ARRAY. If everything looks good, reboot once more and enter BIOS. Make sure your RAID array is showing as a bootable device. Do the normal stuff such as making sure your optical drive is set as the first boot device etc.
Save, exit. If all goes well you will be prompted to press F6 to install 3rd party RAID drivers upon the initial Windows OS installation routine.
Good luck.

WRT54G V6 strange problem with cable modem

I have a cable modem with Comcast Digital Voice. I have a WRT54G V6 with the latest firmware. After much discussion and troubleshooting on the phone with Linksys rep, I returned and swapped the router. No change to the problem. I've seen similar issues, but not exactly the same one, on this board. Here's the situation:
I have an XP computer connected via Ethernet directly to the router. I have 1 Mac Laptop (OSX) and 1 Thinkpad (XP) laptop that use the home network interimly via wireless. I use WEP, but no special filtering.
I can get everything set up fine, and all will work for some time. Like I've seen some other's say, about 30 - 90 minutes worth of online time, and the router seems to hang - BOTH wirless and wired. During this time, my wireless signal does not drop out. But I sudddenly cannot get to the internet.
What makes it especially odd is that my digital voice (VoIP) does NOT drop out, meaning my internet connection is still up (and the cable modem shows no signs of trouble - and a reset of the cable modem makes no difference by itself.
The only thing that fixes the situation is a hard restart of the router (meaning unplugging it and then plugging it back in).
The Linksys help folks had me do a complet reset of everything and then even had me change some parameters, including a change of channel, manual MTU, etc. Nada.... Then I changed the router to a new one... Same-o same-o.
I suppose the Cable Modem could have a bad ethernet port -but I read SO many things similar to this problem on the board that I doubt it.
And to think I dumped my NetGear!!! (It also had problems - that were associated with unstable wireless).
Any help is appreciated. It's a real pain.

One other thing... When it drops out, I cannot even get to the router admin page via my web browser and wired connection to the router. So perhaps this has something to do with DHCP server dieing?

Odd problems with Spry features

I have finished a site at
http://www.magnoliaparkburbank.org
that uses many Spry features such as autosuggest, master-detail
regions and css classes built into the xml files. The site has been
developed on a Mac but I have a BrowserCam account with remote
access so I can test the site on multiple platforms and browsers.
My client is reporting odd behavior on some of the features.
Particularly problematic is the store directory section. When the
user clicks on "Neighborhood Directory" a pop up window opens with
an html page that is mostly Spry driven. The client is reporting
problems in the select menu (not all categories showing up) I have
worked hard on the autosuggest feature with the help of Donald and
Kinblas. The auto-suggest seems to work sometimes and not at other
times. The user is supposed to be able to type the complete store
name or part of the store name to see the address and phone number
of that particular store. If the user wants to search again he
clicks the search again and the fields are cleared. Sometimes
things just seems to get stuck. There is also a problem in some
browsers (Firefox) that does not allow the user to return to the
parent window. I am looking for some feedback, suggestions and/or
advice on the useability of this site. This is all complicated by
the fact that the bulk of the site is in Flash including the call
to open the browser window for the store directory.
Thank you so much for any help!

Hi Marlene,
The close window problem is due to the IE hack
window.opener='x' that you have in the href of your close window
link. If you are trying to figure out how to prevent IE from
prompting the user to see if it is ok to close the window
programatically, do a net search on "window.opener='x'" and you'll
see some pages that discuss a way of using openWindow to trick IE
into not prompting the user based on the window name ... I believe
the discussion centers around how that also works for other
browsers like FF, etc.
Regarding your auto-suggest problems, we'll need specifics
from you as to what isn't working properly, what browser and
platform, and what your expectations are in specific situations.
For example what is your expectation when your user types in
"siren" and hits return? etc.
--== Kin ==--

WRT54G v6, Weird Problem

My new WRT54G router was working fine for a couple weeks, both wired and wireless performance, on one desktop(wired) and two laptops(wireless). Recently I've been having a strange problem with the wireless; it connects with an excellent signal, and I can logon to messenger services or online games, but I cannot browse the internet with Firefox or IE.
I've tried many solutions, including uninstalling and installing the router again, installing my Verizon DSL service again (connection type PPPoE), trying static/dynamic IPs, WinSockFix, uninstalling and installing my wireless adaptor(Atheros AR5005G), trying a different adaptor(Belkin Wireless G Card), turning on and off my Windows Firewall, using the SES service, releasing and renewing the IP. I'm begining to lose hope, and its driving me crazy because it doesn't make sense; why would only internet browsers not work? Most likely there's a small thing I'm overlooking, but if I can't get around it I'm going to have to find a new router. ANY help is apreciated.
Thanks, Chad

Thanks for all the help Jern; I went into FireFox and set the connection type to a free proxy server, it's working fine now. I wonder why it worked to begin with though, and decided all of a sudden that it needed one? Oh well, I may never know, Thanks again.
Chad

WRT54GS v.6 Problem (Final Thread)

I am getting tired of this thing, and I'm sure you guys are getting tired of me posting a million threads about my blasted Router.
So, I have updated my WRT54GS v.6 with the most recent firmware, and I use a PPoPE connection... but it still keeps randomly disconnecting from my computer...
Anyways, this is my final thread I'm going to make. If you guys can't help, then the only thing I could do is get a new router...

Are you trying to connect to your router by wire or wirelessly?
For now, please use all wired connections. If your computer has a wireless adapter, please turn it off. If you have more than one computer connected to your router, please disconnect all but one of them.
Your system should be wired as follows:
Modem -- router -- computer
The ethernet port on the modem should be connected (by ethernet cable) to the Internet port of the router.
Connect router LAN port 1, by ethernet cable, to your computer.
If your modem has a USB port, do not connect it to anything.
1) Please state your ISP.
2) Please state the make and exact model number of your modem (not the WRT54GS).
3) Please use the following procedure to reset your router to factory defaults, and report your results:
You need to try again to reset the router to factory defaults.
To reset your router to factory defaults, use the following procedure:
1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
If you cannot get "Reply from ..." in step 9 above, your router is likely dead. Please report back with this problem.
If you get a reply in step 9, but cannot complete step 10, then either your router is dead, the firmware is corrupt, or the computer is having problems talking to the router. Report back with this problem.
If you need additional help, please report back the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Please let me know how things turn out for you.
Message Edited by toomanydonuts on 01-27-2009 01:34 AM

WRT54G Wireless Router Problem. Need Help!

I'll start with the basics of my situation and if more details are needed, I will provide to the best of my ability.
I have a comcast cable internet connection. I have 6 computers in my house. Two of them are downstairs (which is where our modem is.) The other four computers are upstairs. All of these computers are Desktop computers with the exception of one laptop.
My laptop (which is Windows XP) can pick up a random wireless signal from the room it is in. I also found out a way to share the internet connection on the computer by going into the properties of my network connection and enabling internet sharing on it. This means if I connect a network cable from my laptop to another computer, I can leech the connection from my laptop and have internet access on the other computer. I also had a switch that I used to connect the other 3 computers upstairs by means of the laptop. The problem was, the laptop was using someone else's wireless connection in the area, and it wasn't strong enough to keep up a constant connection.
I decided, if I can leech someone else's wireless connection, why not have my own. So i recently bought WRT54G Wireless Router and set it up on one of the computers downstairs (because that's where the modem is). It works fine as far as connecting my laptop to the internet from upstairs. My laptop can access the internet through the connection I set up in the LELA program.
Here is the part I am confused about. Everything is plugged in correctly as far as the router is concerned because the laptop can access the internet. But when I connect an ethernet cable directly to one of my other computers (which are Windows Vista, but I didn' t have a problem with it previously when I was leeching someone else's connection), the connection drops on my laptop, and the other computer still can't access the internet. A notice pops up that says its trying to identify the network, but it gives an error that says there is something wrong with the DNS. As soon as I disconnect the ethernet cable connecting my laptop to one of the other computers, the connection is fine again on the laptop. It's only when I connect the computers together that the connection drops.
I just don't understand why it wouldn't work when I created my own network if it worked with another network with no problem. My whole point in getting a wireless router was to have a router within good range to keep up a constant connection on my other computers that aren't in range of the modem downstairs. I just don't know where else to look. I'm not sure if it can be fixed on LELA, manually through my wireless settings, or if it could be a problem with one of my computers' settings. I've tried many different things and I'm not sure what else to do so any help is most definately appreciated. I feel like I've tried everything. I know it's possible because I've one it before, I just need the help because I'm not much of a networking person and I don't know what I should start with to make this work.
Thank you to anyone who can help or even point me in the right direction.

Access router setup page ...Click on the Wireless tab on the Setup page- Here Wireless Network mode should be mixed- Provide any non-linksys name .... Set wireless channel to 11- And wireless SSID broadcast should be Enabled and then click on "Save Settings" >>Now Click on the Sub tab under wireless > "Wireless Security" Change the Wireless security mode to WEP/WPA ...type in the key & click save settings .... >>>>Click on Advanced Wireless settings>>Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304 Change the RTS Threshold to 2304 >>Click on "Save Settings" Check the connection once again & see if it works or not ...

WRT54G File sharing problems

Hi - hopefully this is a simple problem. I have a Windows XP computer, and a Windows 7 computer. They are in the same workgroup, and I have gone through all the troubleshooting through windows, but I can not get the computers to share files. I have no trouble connecting to the internet through either computer on my WRT54G router, which has the latest firmware. I tried to ping the Windows 7 computer from the XP computer, and it worked perfectly, but when I pinged the XP computer from the Windows 7 computer, it says that the communication has timed out. So there must be some firewall (I've tried to adjust this, and even turn it off - nothing) stopping the communication. Any help would be great. My goal is to be able to share files. Thanks!

Go into the computer software firewall on each computer, and set it to "trust" the other computers on your network.
If your firewall or PC security program keeps a list of trusted applications (also known as a "trusted zone"), then make sure that your router is in the trusted zone on your firewall...If that does not work then,try to disable all the firewall and antivirus on the computer and then check..!!!

WRT54G v6 Odd Problem

Similar Messages

Maybe you are looking for