WRT54GL Password Problem

Ok, so a few months ago, my sister was unable to get into our wireless network from her laptop. My dad and mom brought their laptops home and were unable to join as well. I have gone to http://192.168.1.1/WL_WPATable.asp and checked that they are using the correct password which they are. WRT54GL router is set to:
Wireless Network Mode:          Mixed
Wireless Network Name:         MAS
Wireless Channel                    6 - 2.437GHZ
Wireless SSID Broadcast:                   Enable
Security Mode:                WEP
Default Transmit Key:      1
WEP Encryption:              128 bits 26 hex digits
passphrase:                    (prefer not to tell you)
Key 1:                            4C9DAFCD4DD02FF1675BD2CB32
Key 2:                            AABF05C886B01CDB8D030C0644
Key 3:                            2D29491366CF969E987F164F18
Key 4:                            2C43166C9240FF0E59206693BC
Wireless MAC Filter:               Disable
Authentication Type:        Auto
Basic Rate:                     Default
Transmission Rate:           Auto
CTS Protection Mode:       Disable
Frame Burst:                   Disable
Beacon Interval:              100
DTIM Interval:                 1
Fragmentation Threshold: 2346
RTS Threshold:                2347
AP Isolation:                   Off
SecureEasySetup:           Enabled
Thanks in advanced!
(If you need anything else, dont hessitate to ask)

Use WPA2 for encrytion. It is more secure than WEP.
Greetings from Northern Ontario, Canada

Similar Messages

RT31P2 + WRT54GL + Vonage problems

Hey guys, I've been having a recurrent issue for a while now, and lately the problem has gotten a lot worse. Before I describe the problem, I would like to explain the exact set-up that I have to better explain the situation. (I have had this set-up for a good 4-5 years now)
- I have vonage phone service, and they provided me with the the RT31P2 router for use to connect my phone lines to. Since this is not a wireless router, I went out and bought a WRT54GL, so I can get wireless access for my laptop.
- In order to set up the two routers, I connected the ethernet cable from my cable modem and plugged it directly into the WAN of the RT31P2. I took another ethernet cable, plugged it into one of the ethernet ports on the RT31P2, and plugged the other end into the ethernet port of the WRT54GL.
Note: Before I did the above connections, I disabled the DHCP on the WRT54GL and changed the starting IP address to 192.168.15.2. Also set up a secure password enabled network. For the RT31P2 router, all the settings remained the same, and it's IP is 192.168.15.1.
- For the most part, this set up has been absolutely fine. My home phones would work with no static, no dropped calls, etc. I have one PC that is hooked up via ethernet on the RT31P2. Three laptops that connect wirelessly to the WRT54GL.
Problem: A couple of days ago, I noticed my internet speeds became drastically reduced on the PC's that are connected via WiFi. (Normally, I would get speedtest.net results with a range of download: 9-10Mbps and upload: ~ 0.54Mbps.) The speeds I was getting instead were close to 2Mbps (download), and even lower for upload. I isolated the problem and found out that only PC's connected via WiFi were experiencing this slowness. The one PC connected via ethernet was still getting its average normal speeds. (Currently, I hooked up two laptops to the RT31P2 via ethernet and disabled the WRT54GL router, and its running at normal speeds).
I called up my ISP to come and take a look and see where the proble might be, and everything on their end seems to be fine. Since they only provided the cable modem, anything extra has to be taken care of the party that is responsible for it. So basically, everything via direct connection from Cable modem, or ethernet connection from RT31P2 is good, but my wireless connection from WRT54GL is no longer usable because of the slowness. I have not changed the above-mentioned set-up at all, there were no hardware changes, nothing that can explain why all of a sudden devices connected to my wifi would be this slow. This issue seems to occur maybe 2-3 days every two weeks or so, but currently, it's been going on for about a week. I think I also had a similiar problem like this sometime last year, and it took a long long time for the wifi to become stable again (close to a month). At that time, my ISP said the same thing to me - that there is no fault on their part because the signal strength was good on their end.
So does anybody have any idea/know why this might be happening with my wireless router?
*Also, another issue with vonage phone service - right when the wifi started acting up, I noticed that my home phone was getting a lot of static, making calls unbearable. I would get a dial tone, but it was absolutely impossible to carry out a conversation with that amount of static. So I called Vonage this morning, and we spent a good amount of time trying to isolate the problem. What we came up with is the fact since I kept my cable modem and routers literally on top of each other, that it was causing some type of interference. When I moved all the devices away from each other, the static disappeared (only a little bit remained, but not a big deal). However, after I hung up the phone with vonage support, I realized that the static was not gone because I moved the routers away from each other, but the fact that the static only occurs if i have another ethernet cable plugged into the RT31P2 (which is the router where the phone lines connect to), where the other end of ethernet cable is connected to a PC. Any ideas on what might explain that? Do you guys think there is a correlation between the static on the vonage and the wifi problems, even though they are on different routers..?
I know it's a long message, but I would really appreciate if somebody would take the time to go over this post and help me out. Thanks a lot to anybody with suggestions.

Hi rsayeed and welcome to the Cisco Home Community!
The RT31P2 is now being handled by the Cisco Small Business Support Community.
For discussions about this product, please go here.

I have a password problem. After importing data and settings from one MacBook Pro to a new one, I have to put my iCloud password in when re-starting, but the password from the old computer in when waking the computer from sleep.

I have a password problem. After importing data and settings from one MacBook Pro to a new one, I have to put my iCloud password in when re-starting the new computer, but the password from the old computer in when waking the computer from sleep. I want to use my iCloud password on both computers consistently. How can I fix this?

The only other place to change a password for the computer login is in Users & Groups preferences. But I don't really know enough here to fix your problem. You can try fixing the keychain:
iCloud- Frequently asked questions about iCloud Keychain
Tutorial: Resolving Keychain Issues
If you can't access your keychain, or forget your password If you can't get into your keychain file because you've forgotten your password or the keychain file appears to be corrupt, there are a couple of options.
First, if you've forgotten your password, you can use the "Keychain First Aid" utility to make the keychain password the same as the login password. This can be accomplished via the following process:
1. Open Keychain Access (located in Applications/Utilities)
2. Go to the "Keychain Access" menu and select "Preferences"
3. Click the "First Aid" tab
4. Make sure the "Synchronize login keychain password" box is checked
5. Close the Preferences window
6. Go to the "Keychain Access" menu and select "Keychain First Aid"
7. Enter your username and password
8. Click the "Repair" button
The second option is to completely delete your keychain then recreate it. This routine is useful if your keychain appears to be corrupt or otherwise inaccessible. This can be accomplished as follows:
1. Launch Keychain Access (located in Applications/Utilities)
2. Click "Show Keychains" in the lower-left corner of the window.
3. Select the problematic keychain from the left-hand pane.
4. Navigate to the "File" menu and select "Delete Keychain '(name of keychain)'"
5. Check all options for deletion and press "OK"
6. Create a new keychain by going to the "File" menu, then "New" and selecting
"New Keychain"
7. You can now make this keychain your default if you desire by selecting it, then
going to the "File" menu and selecting "Make '(name of keychain)' Default"
Login as root and perform repair In some cases, problems with keychains can only be resolved when logged in as the root user.
First, you want to enable the root user:
1. OS X Mountain Lion: Enable and disable the root user
2. OS X Lion: Enable and disable the root user
3. Mac OS X 10.6: Enabling the root user
4. Enabling and using the "root" user in Mac OS X
After enabling the root user, and logging in under this account, again open Keychain Access. First attempt repairs using Keychain First Aid, and failing that, delete then recreate the keychain as described above while logged in as root.
Persistently asked for stored passwords If you are persistently asked for passwords in various applications that you have specified should be remembered in a keychain, your "login" keychain may not be active for one reason or another.
Navigate to ~/Library/Keychains/ (this is the Library folder inside your user's home folder). Find the file named "login.keychain" and double-click it.
Failing that, select the "login" keychain within the Keychain Access application and make sure it is the default keychain by going to the "File" menu and selecting "Make 'Login' Default"
Turn off Keychain synchronization in applications having problems If specific applications are experiencing issues when accessing password-protected material, the Keychain may be to blame.
The above comes from an article published on MacFixit.com.

WRT110 WIFI password problem

Hi Everyone,
I've got a very strange problem. First, I indicated WPA under Wireless Security section and typed in my passphrase. However when connecting to my wireless network name my passphrase never worked. Second, I completely disabled security and tried to simply connect without any passphrase, but I was still being asked for a passphrase nonetheless. I checked and double-checked and saved settings making sure security was disabled, but I was still being asked for a passphrase when choosing my wireless network!
I could probably restore my WRT110 to factory settings, however I don't want to loose other configurations like certain open ports and IP addresses I opened up for firewall.
Is there a way for me to resolve my WiFI password problem without restoring to factory default? I just need to figure out how to make the WiFi passpharse work. Here's what I have there:
Security Mode: WPA Personal
Encryption: TKIP
Passphrase: 0sunspot0
Key Renewal: 3600 seconds
However, when I pick my wireless network and try to connect to it by typing in 0sunspot0, I get authentication failure!
Am I doing something wrong?
Thanks,
Victor.
Solved!
Go to Solution.

I have misplaced all relevant info. for my router. I am trying to connect to a mini ipad. What do I need?
Is the router up and running and you would only want to add a device wirelessly? If so, you may access the setup page as sabretooth has said. To check the wireless settings, you may check this link, http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=476326f36c294e579ba6691a8db5411e_3698.xml&pid=80&r...

Sys password problem "INSUFFICIENT PRIVELEGES"

hi,
This is with refernece to my earlier post, i can now login as a DBA thry OS authentication.
Re: sys password problem
but now i try to vreate a new password file and it successfully created using orapwd....
but when i try to login as a sys user thru oracle authentication i couldn't because i am getting an error
"INSUFFICIENT PRIVELEGES"
and another thing i would like to know do i have to shutdown the database or not for the same.

Please review the document link sent earlier
Setting REMOTE_LOGIN_ PASSWORDFILE
In addition to creating the password file, you must also set the initialization parameter REMOTE_LOGIN_PASSWORDFILE to the appropriate value. The values recognized are:
NONE: Setting this parameter to NONE causes Oracle Database to behave as if the password file does not exist. That is, no privileged connections are allowed over nonsecure connections.
EXCLUSIVE: (The default) An EXCLUSIVE password file can be used with only one instance of one database. Only an EXCLUSIVE file can be modified. Using an EXCLUSIVE password file enables you to add, modify, and delete users. It also enables you to change the SYS password with the ALTER USER command.
SHARED: A SHARED password file can be used by multiple databases running on the same server, or multiple instances of a Real Application Clusters (RAC) database. A SHARED password file cannot be modified. This means that you cannot add users to a SHARED password file. Any attempt to do so or to change the password of SYS or other users with the SYSDBA or SYSOPER privileges generates an error. All users needing SYSDBA or SYSOPER system privileges must be added to the password file when REMOTE_LOGIN_PASSWORDFILE is set to EXCLUSIVE. After all users are added, you can change REMOTE_LOGIN_PASSWORDFILE to SHARED, and then share the file.
This option is useful if you are administering multiple databases or a RAC database.
If REMOTE_LOGIN_PASSWORDFILE is set to EXCLUSIVE or SHARED and the password file is missing, this is equivalent to setting REMOTE_LOGIN_PASSWORDFILE to NONE.

Password Problem for some applications:

Password Problem for some applications: I'm unable to download Adobe Reader, Microsoft updates. I have no password set to start the computer, applications such as Pages, Numbers, Keynote require no password for updates.
When I try to update Microsoft or Adobe Reader, first I try with no password, I get a hint and I know exactly what it means, but still unable to download. I don't know enough about passwords as to why some I can download and others I can't. So I don't know what I should read. I'm the only user of this computer and prefer not to have to deal with passwords. I'm using a MacBook Pro, Mac OS 10.9.3

Oh what a tangled web we weave. I read up on keychain and I don't understand what I'm reading. Right now I cannot download my email on my computer, I can access it through the cloud. I'm sure it will be the same for the other iCloud feathers. When I go to preferences and select iCloud when ever I try to sign in I get some dialog box it shows up "A keychain cannot be found to store 1076701306. It doesn't matter whether I reset it or cancel it out iCloud preferences remains grayed out.
In keychain access on the left side under keychains and Read's local item, systems, and systems roots.
When I select local items nothing shows up to the right under the name column even when down under all items is selected nothing shows up. And nothing shows up to the right when under categories I selected the other options password etc. On the other hand when I select under keychains systems, systems roots I do get items to show up on the right side under names under all items, passwords, etc. Where do I start?

Outgoing Mail & Password Problems-Solution

Hi All,
After upgrading to Snow Leopard I had a couple of issues.
1) Couldn't send mail
2) Passwords in Mail were not getting saved
To resolve the outgoing mail problem see this article
http://support.apple.com/kb/TS2998
Basically edit your outgoing server and change the outgoing port to custom and put in you appropriate port number. I use Cox without SSL so I used 25
For the password problem go to your Home folder, go into Library and move the folder called "Keychain to the trash then restart. After restarting open Mail go into Preferences and add your password back to your account. It should now retain the password. This will also help with other apps like Safari that use Keychain to store passwords.
Also I was able to copy a keychain from another computer to get back all of the passwords I already had. After the upgrade my keychain was mostly empty.
Good Luck,
Mark

Had been trying that, to no avail. Found that I had to entirely delete the account and set up entirely new account with new password which worked.
Thx

Email password problem!!

I've had this macbook for about 1-1/2 years and for the first year or so had no email-related problems. However, for the past 6 months or so, I have password problems relating to one of my email accounts. Several times per day (even several times per minute), I will get a message on the screen something like this: The incoming mail server incoming.verizon.net has rejected the password for the account (my personal email account). Please re-enter the correct password. There is a little checkbox "remember this password in my keychain". Doesn't matter whether I check this box or not, five minutes later the message is there again.
I have gone to Preferences/Accounts, deleted and re-entered the password, but it has no effect. I have three other email accounts on this macbook that are unaffected.
Can anyone help? I'm getting reeeaaaalllly frustrated.

Hi there!
OK--some confusion here. There are two types of accounts to discuss -- your BIS account and your email accounts.
BIS is Blackberry Internet Service, the service, hosted by your carrier, that provides the conduit between your BB and your internet facing email services (e.g., Yahoo, Gmail, etc.). BIS has credentials for accessing it.
Your email accounts likewise have their own credentials. These credentials are stored within BIS so that it can, without your intervention, check your email services and see if there's anything to deliver to your BB...and do so if there is.
The screen you described sounds like your BIS credentials screen -- those credentials are whatever they are. And probably not the same as your email account credentials. You need to know what your BIS credentials are..they are yours. If you don't know them, then you need to contact your carrier for assistance as they manage your BIS account.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

IPod touch disabled - password problem - was able to reset apple id

iPod touch disabled - password problem - I reset apple id & password, now having trouble syncing.

iOS: Forgotten passcode or device disabled after entering wrong passcode
Try restoring Recovery Mode:
iClarified - iPhone - How to Put an iPhone Into Recovery Mode
If unsuccessful, try DFU mode:
iClarified - iPhone - How to Put an iPhone Into DFU Mode
After restoring, set as new iPod:
iOS: How to back up your data and set up as a new device
OR
Restore from back up:
iOS: How to back up
Hope this helps.

Plagued by Password Problems

The current problems I'm experiecing with my password started back in the summer last year (2014). What would happen is that, whilst on my PC, Outlook would, out of the blue, suddenly request that I enter my password - which it already had, of course. But when I did renter it, it still kept on requesting it and refused to send or receive any email. I then turned to my iPhone, and it too was no-longer able to send or receive email, claiming an invalid password.
I then went onto my BT home page and accessed my BT Yahoo email via the internet, which was still working. However, after a while I would even find myself blocked from BT Yahoo account - BT requesting that I reset my password. I would do that, and for a while, Outlook, iPhone and BT Internet all worked fine. A few weeks later however, we have a reapeat performance - Outlook stops working, iPhone stops working and I'm back having to use the BT Yahoo website. I reset my password again. This scenario has played out numerous time over the last 8 - 10 months.
I became so frustrated in Jamuary this year, that I contacted the BT email helpline and an engineer (who I have to say had very little patience with me, regarding the problems I was having as self-inflicted) eventually gave me a new password and reset it for me at their end, telling me this would cure all my failed password problems - and it did, for a while. The whole fiasco kicked off again several weeks later. Again another BT engineer reset my password at the beginning of April this year - it lasted a week before the dreaded Outlook dialog, "Enter Username and Password" appeared and my iPhone stopped receiving - again.
Recently passwords have been lasting for only a few days and it's not been unsually to have to reset my password several times in one day. It's becoming a nightmare. I need a password to last more than a few hours, days or even weeks. I need Outlook working. I need to be able to use my iPhone to send and receive email, not worrying about when the next "failed password" error message is going to appear - forcing me back onto the BT Yahoo website.
I've raised this issue via the BT helpline with two of their engineers now, and despite their best efforts and assurances, the problem is still present and as bad as ever. I can't carry on like this and it's affecting, not just my social life, but my working life too.
Does anyone have a longterm fix for this problem? And am I alone in this experience?
Prof.

Professor wrote:
The current problems I'm experiecing with my password started back in the summer last year (2014). What would happen is that, whilst on my PC, Outlook would, out of the blue, suddenly request that I enter my password - which it already had, of course. But when I did renter it, it still kept on requesting it and refused to send or receive any email. I then turned to my iPhone, and it too was no-longer able to send or receive email, claiming an invalid password.
I then went onto my BT home page and accessed my BT Yahoo email via the internet, which was still working. However, after a while I would even find myself blocked from BT Yahoo account - BT requesting that I reset my password. I would do that, and for a while, Outlook, iPhone and BT Internet all worked fine. A few weeks later however, we have a reapeat performance - Outlook stops working, iPhone stops working and I'm back having to use the BT Yahoo website. I reset my password again. This scenario has played out numerous time over the last 8 - 10 months.
I became so frustrated in Jamuary this year, that I contacted the BT email helpline and an engineer (who I have to say had very little patience with me, regarding the problems I was having as self-inflicted) eventually gave me a new password and reset it for me at their end, telling me this would cure all my failed password problems - and it did, for a while. The whole fiasco kicked off again several weeks later. Again another BT engineer reset my password at the beginning of April this year - it lasted a week before the dreaded Outlook dialog, "Enter Username and Password" appeared and my iPhone stopped receiving - again.
Recently passwords have been lasting for only a few days and it's not been unsually to have to reset my password several times in one day. It's becoming a nightmare. I need a password to last more than a few hours, days or even weeks. I need Outlook working. I need to be able to use my iPhone to send and receive email, not worrying about when the next "failed password" error message is going to appear - forcing me back onto the BT Yahoo website.
I've raised this issue via the BT helpline with two of their engineers now, and despite their best efforts and assurances, the problem is still present and as bad as ever. I can't carry on like this and it's affecting, not just my social life, but my working life too.
Does anyone have a longterm fix for this problem? And am I alone in this experience?
Prof.
It is likely you are suffering from the problem of multiple device access to your email account. You need to ensure that if you are accessing your email by several devices and methods that they do not conflict.
I have sent you a private message (PM) that gives general longterm fix to the problem. Please feel free to reply via the PM method. I have found that this is the best mechanism to progress the issue.

SFTP password problem

Hi Everyone,
I've just begun setting up Server with port forwarding through my Airport Time capsule. Everything works when I SFTP as myself. from terminal, either SFTPing to [email protected] and entering my apssword lets me in... as well as simply SFTPing to 123.456.789.000 and entering my password.
problem is, I created another account. I created one account through "users" in system settings, and I tried to create another account within Server. both accounts I gave administrator priveleges to, just for good measure.
both accounts come back saying incorrect password. my spider sense is telling me that it might have something to do with the way MY username is configured -- in my previous experience, I shouldn't be able to simply ftp to the raw IP without a user@ and have it ask me for a password.
Thanks,
Aemilia

So if I understand this correctly, you now have two accounts with the same short name? You'll want to resolve that duplication; that's not something that works well, and all sorts of stuff can get tangled.
If you don't have duplicated shortnames here, then there's something else going on. Start by confirming the remote account has ssh access and a valid and accessible login home directory; that's all necessary for ssh (and sftp, which is based on ssh) to work.
Also have a look at the system logs for any related errors.
Also consider setting up certificate-based logins for ssh (and sftp), as those are more secure than passwords, and particularly given the prevalence of brute-force ssh attacks on the network.

IPod touch password problem

I forgot my password on my old iPod touch, how do I get into it?
If I plug it into my computer and try to restore it, will it ask for my iTunes account password?
Because I forgot that password too (because it's an old account which I can't use anymore because I don't know the answers to the security questions).
What do I do?!?!?!?!?! I just want to be able to use the iPod again

For iTunes account password problem, contact iTunes:
Apple - Support - iTunes - Contact Us
Contact iTunes Phone
For a
Forgotten Screen-Lock Passcode
Connect the iOS device to your computer and try to make a backup
iOS: How to back up
Then restore via iTunes. The iPod will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

WRT54GL Internet Problem

Hi all, since I got my WRT54GL my internet became very laggy, having spikes and very slow download speed. Also it randomly discconects and I have to manualy go to router's home page -Status - and press connect botton 2-3 times in order to connect.
   It's the same thing regardles of the number of PC connected to it, or the method of connection (wired/wireless) . Also I should mention that my internet service provider is a good one , before this router I hadn't have any problems.
   I run different OSs on the PC's and here are some of the router's settings :
   Firmware Version: v4.30.13 (latest I think)
Internet Connection Type : PPPoE
Connect on Demand : Max Idle Time   Min.
MTU : 1300 ( tried 1350 -1400)
Security Mode : WPA Personal
WPA Algorithms: : TKIP
Group Key Renewal : 5000 sec
Beacon Interval: 75
Fragmentation Threshold 2304
RTS Threshold: 2307
  Firewall Protection:  Enabled
Block Anonymous Internet Requests & Filter IDENT(Port 113) Checked
DMZ / QoS Disabled
UPnP: Enabled
Please help me if you can Thanks.
   Also , a second ,unrelated question : Can I make another account for the router's homepage ? like a guest account or something , and if not what is the purpose of the User Name on the login page ?
Thanks for reading

- Check the option "Keep Alive" and click on save settings...Now,check.
- You can not create another account on the router homepage.
- The password is created for the router's setup page,so that no one can manipulate with the configuration of the router..By default the router password is "admin"..You can change the password under Administration tab.

Mail and Password problem

I am trying to use Mail on a MacBookPro with Lion. My wife uses it successfully on her iMac using Snow Leopard. I use it (sometimes) on my iMac also using snow Leopard. When I open Mail in Lion it asks for her password which is different from mine and if i use it, it shows me all her mail, which I don't care about. I use other e-mail apps on my two computers so I can live without Mail if i have to. Is there a solution to this problem?

Hi again. I saw that you tried another thread some days ago for the same problem. There you said: "Using Lion, on my MacBookPro Mail has an intermittent problem. Some days it asks for my wife's password (for her Mail account) and I cannot access my own new mail. Some days it works fine. Help."
So, to get this right: On the MacBook Pro you have set up ONE account in Mail.app - YOUR account. And despite that it happens from time to time that Mail asks you for the password of a totally different E-Mail account - the one from your wife? And your wife's account is not set up in Mail.app.
Everthing correct?
Is your wife's account set up on different E-Mail applications on that MacBook Pro? Is she using this laptop as well, and if yes, is she using the same login account to the computer for this?

Can't connect to wifi network - password problem?

I just bought a new MacBook Pro C2D 2.16, but I can't get it to connect via airport to my wifi network at home. When I use the network setup assistant, i'm prompted to enter the WPA password, but then i get a message saying "password invalid"? If I try connecting through the Internet Connect window, it says: "there was an error joining the airport network"?
After reading through the forums a bit, I tried changing the WPA password, changing to WEP, and even using the open setting, but my MBP still won't connect to my DSL router (Zoom X6 router). My other Windows laptop connects fine.
This is my first Mac, and I'm a bit clueless regarding networking as well, so any advice is appreciated. BTW, I've got OSX 10.4.8 installed.
Macbook Pro 2.16 Mhz C2D Mac OS X (10.4.8)

I solved it! Well, not really - I just did a bit more searching on the forums and found someone else with the same problem - solution: Update the firmware's router, and now my MBP can connect properly, with WPA2.

WRT54GL Password Problem

Similar Messages

Maybe you are looking for