WRT54GS wireless router - Outlook Express won't allow me to send/recieve e-mails.

I've followed the Port Triggering advive on http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=666&p_created=108421...
but still doesn't work.
these are the error messages that pops up when I open Outlook express:
***The host 'SMTP' could not be found. Please verify that you have entered the server name correctly. Account: 'POP3', Server: 'SMTP', Protocol: SMTP, Port: 25, Secure(SSL): No, Socket Error: 11001, Error Number: 0x800CCC0D***
and
***The host 'POP3' could not be found. Please verify that you have entered the server name correctly. Account: 'POP3', Server: 'POP3', Protocol: POP3, Port: 110, Secure(SSL): No, Socket Error: 11001, Error Number: 0x800CCC0D***
Can anyone help?

The only other email problem like this that I have seen is that occasionally Windows has "fogotten" my email password. Try entering your password again. If this does not fix it, I would suggest deleteing the email account completely, then reboot, then setup the email account again, and make sure you carefully follow all your ISP's recommendations.
If this still does not fix the problem, contact your ISP tech support. I had an email problem once that could not be resolved, but when I called tech support they told me about a new email system change that they "had not had time to post yet" in the instructions.
Hope this helps.

Similar Messages

IPhoto 9.3 won't allow me to send videos in Mail, iPhoto 9.3 won't allow me to send videos in Mail

Since the new update of iPhoto to version 9.3 I can't send any videos in Mail. When I drag a video into the message it's just a black square with the play button. Is anyone else having this problem?

OS X Mail: Troubleshooting sending and receiving email messages

New WRT54G wireless router. Who's the genius that can help me?

I just purchased a WRT54G wireless router. The main reason is my son wanted to be able to use his Sony PSP online. I also have two desktop computers that will be wired thru this router. My question's are. If he is using his PSP online and the desktops are wired, can the desktops be "hacked" if they are on/off? If the router is turned off then the wireless is not working? If I access the router and disable the SSID Broadcast then the wireless portion of the network is off? What are the safest security settings to protect my network?
Thanks.

Dead Mans Zone.... I guess.
Using the DMZ is a very simple and risky way to forward ports. The DMZ takes an ip address of a computer on your network, and forwards all ports to that computer. This is really nice if you are having problems forwarding ports for some program. It can be a life saver if your router will not allow you to properly forward ports. It also has a huge downfall. The computer that is in the DMZ is now wide open to internet traffic. Meaning that it will catch virii, and it will be at risk of being hacked. If you put a computer into the DMZ then please install a software firewall to help protect it
Orange/White. The Cisco logo is the Router’s SecureEasySetup button. It lights up and will stay orange when the Router is powered on. The color orange indicates that the Router is not using the SecureEasySetup feature, while the color white indicates that the Router is using the SecureEasySetup feature. When the Router enters SecureEasySetup mode, the Cisco logo will turn white and start flashing. After the Router has generated the SSID and WPA-PSK (also called WPA-Personal) key, the Cisco logo will stop flashing and stay white.
Message Edited by wehowardjr on 12-30-200611:26 AM

I have a WRT54G wireless router. The issue I have is th...

I have a WRT54G wireless router.
The issue I have is that the "wireless network connection" icon light on my laptop stays on continuously and is constantly sending and receiving data even when nothing is open...no Outlook, no browser, no programs.
I have another another desktop PC that is connected thru the same wireless router and the icon light only lights when I open a browser or transmit and receive data thru an action of mine.
With my laptop, as soon as I boot it up, the icon light comes on and stays on with all this data sending and receiving.
Does anyone have any ideas?

You can try to see what connections are active when your laptop is connected. If you're using Windows, bring up command prompt, type "netsat" and see what connections are active to what target(s). Check Task Manager and see what applications or processes are active and using the cpu. Maybe try installing a third-party firewall (ZoneAlarm) that monitors inbound and outbound connections to determine if any rogue applications are running.
"Everybody save your work.......NOW!!"

Dial up connection sharing via WRT54G wireless router

Can someone help me out? Here's my issue
I have an XP based desktop computer that connects to the internet via a dial up 56K modem. I would like to share the connection with my new XP vista laptop using the wireless adapter on the laptop. I have a Linsys WRT54G wireless router. The desktop pc with the connection I want to share is connected to the router via ehternet cable. How do I go about configuring the laptop wireless & the router to allow for this. I assigned a static ip 192.168.1.253 to my desktop from the router (192.168.1.100). When I enable ICS it changes the ethernet to 192.168.0.1.

Your connection download speed should be about the same 8-9Mbits, whether you are wired directly to your modem, or wired through your router .
You said you reset the router to factory defaults and that it was working better. Did the download connection speed through the router go to 8-9Mbits/sec ? If it is still 5-6 Mbits, then this suggests that something in your modem-router system is not setup quite right. If you still have this slow speed problem, then please post the following info:
1) Your ISP (internet service provider)
2) Your modem model number and version.
3) Open your router's setup pages, and go to the Setup tab. List all your settings in the "Basic Setup - Internet Setup" section.
4) List the operating system (Windows XP, Win 98SE, etc.) on the wired computer that you are using for the test.
After you list this info, hopefully someone in this community will be able to guide you to optimizing your settings, given your ISP and equipment.

Tried to update WRT54G wireless router, upgrade failed, router broken.

I tried to upgrade my new WRT54G wireless router with the new firmware. I got an error message that said "Upgrade are failed". I used the correct version of the firmware for my router (I have a Ver 8). I tried to factory reset, but the router is still broken. Any suggestions on what I could do? The entire page I access via IP is broken. All the text is messed up the the links don't work. I can use the router to access my network, but it will not connect to the Internet at all.
Message Edited by Trax416 on 02-05-2008 01:05 PM

I have no firewalls, and it's for sure not a computer related problem. I have tried on three seperate computers. The upgrade failed, it won't let me access the setup page. I have tried to go onto the Internet since, and it lets me, but 80 percent of all Internet sites don't work. This is what shows up in the router firmware page when I go thru the IP. ýýý†††···ÇÇÇ¶¶¶¼¼¼öööiiiSSS¿¿¿ÂÂÂßßßààà´´´¯¯¯***^^^uuuAAAllØhhÐééé²²²äää–––ÃÃÃBBBâââmmm¾¾¾DDDWWW˜˜˜“““ìììÎÎÎ LLLaaajjÓyyy ¸¸¸ÝÝÝøøøÉÉÉãããÞÞÞ:::×××ÓÓÓkkk’’’nnn™™™³³³©©©ççç œœœxxx~~~ÁÁÁffÍ```ggÍ CCCiiÐ‘‘‘ ŠŠŠ@@@žžž YYYµµµÐÐÐªªª¥¥¥??9èèè___ÆÆÆ‰‰‰ÜÜÜšššÒÒÒ¨¨¨¡¡¡vvváááØØØÙÙÙƒƒƒTTT$$$ÍÍÍŒŒŒÚÚÚÔÔÔ••• ËËËÅÅÅëëëººº‚‚‚°°°|||}}}jjÕVVV„„„\\\]]]rrrbbÅ??;ŸŸŸ[[¶»»»[[[%%IGGG???eeË£££ííí‡‡‡fffooÝOO __¾kkÕGGŽ``Á88oddÇKK•CC†hhÏîîî±±±>>|SS¦77mÛÛÛæææpppÖÖÖ®®®ÈÈÈHH êêê??)ÌÌÌÊÊÊÄÄÄ????:llÙZZ²ŽŽŽWW®99q;;vAA‚ÿÿÿffÌ Message The rest of the pages in the setup menu ether show up blank, or give the same message as above.
Message Edited by Trax416 on 02-05-2008 01:35 PM

Switched from DSL to CABLE. WRT54G Wireless Router stopped working.

When I switched from DSL to CABLE, my WRT54G Wireless Router stopped working. I am not able to access the router page (192.168.1.1) Also, when I use the set up CD for re-installation, the wizard aborts in the middle saying it can not connect.
I appreciate any help to resolve this problem.
P.S. The router acts like a one-port wired router.

Here is my favorite method for resetting a router to factory defaults, and trying to get it working again.
To reset your router to factory defaults, use the following procedure:
1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
If you cannot get "Reply from ..." in step 9 above, your router is dead.
If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware. After reloading the firmware, repeat the above procedure starting with step 1.
If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Please let me know how things turn out for you.

HP Officejet Pro 8500 wireless Networking with LINKSYS WRT54GS wireless router

I have a HP Officejet Pro 8500 wireless printer conneted via WiFi to my LYNKSYS WRT54GS wireless router. I do not have a USB cable or ethernet cable plugged to the printer. I am able to use the 'scan to email button' and the 'scan to network folder' button on the front of the printer and I can pint from the PC to the printer with no problems.
I installed the HP printer software from the CD, choosing network/wireless connection, without having to install any USB cables from the PC to the printer in the process. many posts in the forum mention having to connect USB cables in the wireless installation process.
Can I install the software in the same fashion on the other two laptops? Or, do I need to do something differently?

The USB cable is used on those printers which do not have display or front panel wireless setup is not possible. We configure the wireless settings during install and save those settings in printer's memory by transferring through USB cable. Therefore the USB is plugged in during wireless installation temporarily. In your case I don't think plugging in USB cable is necessary as the printer is already on network and had IP address. Connect the laptops on wireless network and proceed with regular install, the printer should be detected automatically.
Thanks
Naveen K
HP Support Engineering Center
Click on BLACK STAR button to say thanks
(Although employed by HP, I'm trying to address the issues with my sole willingness and my employer does not bear any liability for my responses)

Does the Xbox 360 wireless adapter even work with the WRT54G wireless router?!!? If so, how???

I just bought a WRT54G wireless router (Ver 8.0; firmware updated to latest). I have successfully connected my wireless laptop using WEP security, but I'm at wits end trying to get the Xbox 360 wireless adapter to work. (It worked just fine with my Netgear router until that router recently died.)
When I do the "Test Media Connection" routine (you XBox 360 users know what I'm referring to), the Xbox immediately recognizes the Network Adapter and indicates that it is connected to the Wireless Network, but it inevitably fails the next step in the process: IP Address. I have the set-up for the IP address to be assigned automatically by the router (which is set for DHCP Server enabled).
I have gone around the mountain innumerable times myself and then with well-meaning friends who say try this, try that, try this, try that. I've had to re-establish my laptop set-up so many times I wanna scream!
Are the Xbox 360 wireless adapter and the WRT54G even compatible? If so, what am I missing here? I'm not too technical and obviously in over my head, but this ought not be that hard.
Please, please do NOT respond unless you KNOW the answer! I don't mean to be curt, but I'm over / past "suggestions to try."
Thank you VERY much for your time and consideration if you can help me.

I don't think that the X-BOX adapter is not compatible to wireless rotuer .... there are few settings you can try on the router ... Access router setup page ... Please click on the tab "Application and gaming" and click on sub tab "Port range forwarding" 1) On the first line in Application box type in "Xbox", in start box type in 88, in end box type in 88, in protocol keep it both, in ip address type in 192.168.1.20 and give a check mark on enable box. 2) On the second line in Application box type in "Xbox", in start box type in 3074, in end box type in 3074, in protocol keep it both, in ip address type in 192.168.1.20 and give a check mark on enable box. 3) Now save the settings 4) Once you return to the setup page, click on the tab "Administration" and disable the UPNP and save the settings. 5) Now assign the given ip address on your xbox ip address :- 192.168.1.20 subnet mask :- 255.255.255.0 default gateway :- 192.168.1.1 Please assign the dns address on the xbox primary dns :- 4.2.2.2 secondary dns :- 192.168.1.1 6) Please try to test your xbox live. Hope it works ...

I recently bought a WRT54G wireless router along with a W...

I recently bought a WRT54G wireless router along with a WUSB54GC compact wireless adapter and set up both products as directed.I get a message saying connected to the access point but cannot find internet. While connecting to my internet directly,(using a fiber optic cable with no modem necessary)it connects to the internet however using the modem,wired or wireless it still gets the same error. I am not computer literate,so i don't understand abbreviations or where to go to input information into certain areas,so if anyone could help me with step by step information I would be very grateful. Thank you and happy holidays.

Let me know the Model number of the adapter & the operating system of the computer ......so that i can assit you further ... ..

Hi, I just bought a linksys WRT54G Wireless Router. My...

Hi,
I just bought a linksys WRT54G Wireless Router. My laptop was able to detect it wirelessly untill I changing the "Router Name" in the setup page(http://192.168.1.1)
While saving the settings, the wireless network suddently disconnected. From that point onwards, I was not able to detect the wireless network with any computer at all.
I tried unplugging it, resetting it, and even restory factory settings by holding the reset button for aprox 30 secs.
What is wrong?
Thanks in Advanced

Recheck the wireless setting (SSID, encryption, DHCP, etc) on router management page again. Also make sure your computer's wireless adapter setting matches the one you set on router.
picoHat
Home Network, Wireless Network and Computer Networking Made Easy

I installed the WRT54G Wireless router on my desktop and...

I installed the WRT54G Wireless router on my desktop and have been using the internet on that pc and my laptop (wirelessly) for a few months. Last week I uninstalled Norton Internet Security and installed ESET Smart Security. Now my desktop cannot get to the internet and the advisor says it does not detect a router. But my laptop says it's connected to my network and I am able to use the intenet on it. The router itself has all of the correct connecions and the appropiate lights are lit. Could the ESET Smart Security Software have messed up my router firmware. Please advise.

there seems to be consistant issues with Linksys routers according to all the posts ive been reading for the past month while i try to fix my on and off again internet connection. its becomming very annoying. i have asked my cable company to replace my modem, which they did and that didn't even help. last year i bought a new linksys router thinking it would solve my problem back then. it did for a while, then my lap top wouldn't connect any, so i sent it into have it checked and it came back with no problems. soooooooooo apparently, while i am connected to my neighbors open connection from his BELKIN ROUTER and even though the signal is very weak............amazingly enough!! i am still online while typing this.......funny eh?? WELL........it seems to me......that i guess i wont be buying linksys anything anymore. Especially after spending hours on the help line (INDIA) trying to reset channels and reset the router box itself. i give up.......i have 2 pieces of crap routers for sale cheap......any takers? dont waste your time

Trouble accessing the internet on a WRT54G wireless router

I’ve run into a problem setting up a wireless network at my friends’ house. The problem is accessing the internet from the wireless PC that has a WMP11 Wireless PCI Card to a WRT54G wireless router.
The wireless PC is running Windows XP and it sees and connects to the router with “excellent” signal strength but will not connect to the internet.
The router is currently set to WEP 128 bit encryption security. I’ve tried disabling the wireless security all together but when I do that the wireless PC no longer sees the router.
I have no trouble connection to the internet thru the wireless network I have set up at my house when I bring his computer there. But my router is an older Linksys 802.11b so maybe that’s why.
Anyone have any ideas what I should try other than telling him to buy a new wireless G adapter card?

If earlier your Wireless Adapter is working fine with the same network & computer .... try upgrading the drivers of the aqdapter .... from http://linksys.com/download .... uninstall the older drivers & reinstall newer drivers ....

Problem with wired computers on a WRT54G wireless router

I have a WRT54G wireless router that has been working flawlessly up until now. On Sunday, my son informed me that his computer, which is wired wasn't connecting to the internet. Upon further investigating, we found out that our wired computer in our gameroom wasn't connected either. However, our main pc, which is also wired, was connecting just fine. I checked my laptop and several other wireless devices and they were online as well.
Here's the weird thing. In my gameroom, I have just one cable coming into the room from the router. That cable connects to a 5 port switch which then connects to my gameroom pc, Xbox 360, and Playstation 2. I checked my Xbox 360 and it connected to Xbox Live as soon as I turned it on so that told me that I had connectivity coming from the router and the switch. But why was the pc not connecting?
Anyway, I restarted the router, but that didn't fix the issue. I then restarted my cable modem, a Motorola Surfboard, and the router and the issue was resolved. All my pcs were connecting again.
Everything was fine until yesterday when the exact same issue occurred. This time the modem and router restarts did not fix the problem. Again, I have connectivity coming from the router to the 5 port switch because my wired Xbox 360 connects just fine, but my wired pc does not. My son's wired computer is not connecting, but my main pc is. I cannot figure out how to resolve this issue.

Might be possible that the router need reconfiguration ... So reset the router...for few seconds ... after reset ... Please access the setup page of the router by launching an Internet Explorer and type on the address bar, 192.168.1.1 and press enter. When it prompts for the username and password, leave the username field empty and provide password as “admin "" all in lower cases and then click on ok. On the main setup page the ""Internet Connection Type"" should be on ""Obtain IP Automatically - DHCP “. Click on the Save Settings button. Now click on the sub tab ""MAC address clone"". - Click on enable - Click on clone your PC's MAC button and then click on the Save Settings button. Power cycle the network again & see if it works ...

WRT54G Wireless Router Problem. Need Help!

I'll start with the basics of my situation and if more details are needed, I will provide to the best of my ability.
I have a comcast cable internet connection. I have 6 computers in my house. Two of them are downstairs (which is where our modem is.) The other four computers are upstairs. All of these computers are Desktop computers with the exception of one laptop.
My laptop (which is Windows XP) can pick up a random wireless signal from the room it is in. I also found out a way to share the internet connection on the computer by going into the properties of my network connection and enabling internet sharing on it. This means if I connect a network cable from my laptop to another computer, I can leech the connection from my laptop and have internet access on the other computer. I also had a switch that I used to connect the other 3 computers upstairs by means of the laptop. The problem was, the laptop was using someone else's wireless connection in the area, and it wasn't strong enough to keep up a constant connection.
I decided, if I can leech someone else's wireless connection, why not have my own. So i recently bought WRT54G Wireless Router and set it up on one of the computers downstairs (because that's where the modem is). It works fine as far as connecting my laptop to the internet from upstairs. My laptop can access the internet through the connection I set up in the LELA program.
Here is the part I am confused about. Everything is plugged in correctly as far as the router is concerned because the laptop can access the internet. But when I connect an ethernet cable directly to one of my other computers (which are Windows Vista, but I didn' t have a problem with it previously when I was leeching someone else's connection), the connection drops on my laptop, and the other computer still can't access the internet. A notice pops up that says its trying to identify the network, but it gives an error that says there is something wrong with the DNS. As soon as I disconnect the ethernet cable connecting my laptop to one of the other computers, the connection is fine again on the laptop. It's only when I connect the computers together that the connection drops.
I just don't understand why it wouldn't work when I created my own network if it worked with another network with no problem. My whole point in getting a wireless router was to have a router within good range to keep up a constant connection on my other computers that aren't in range of the modem downstairs. I just don't know where else to look. I'm not sure if it can be fixed on LELA, manually through my wireless settings, or if it could be a problem with one of my computers' settings. I've tried many different things and I'm not sure what else to do so any help is most definately appreciated. I feel like I've tried everything. I know it's possible because I've one it before, I just need the help because I'm not much of a networking person and I don't know what I should start with to make this work.
Thank you to anyone who can help or even point me in the right direction.

Access router setup page ...Click on the Wireless tab on the Setup page- Here Wireless Network mode should be mixed- Provide any non-linksys name .... Set wireless channel to 11- And wireless SSID broadcast should be Enabled and then click on "Save Settings" >>Now Click on the Sub tab under wireless > "Wireless Security" Change the Wireless security mode to WEP/WPA ...type in the key & click save settings .... >>>>Click on Advanced Wireless settings>>Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304 Change the RTS Threshold to 2304 >>Click on "Save Settings" Check the connection once again & see if it works or not ...

WRT54GS wireless router - Outlook Express won't allow me to send/recieve e-mails.

Similar Messages

Maybe you are looking for