WRV54G - Problems connecting wirelessly with Windows 7

I'm unable to connect wirelessly to router using a HP laptop with windows 7. I have 2 xp laptops that connect without a problem. The HP laptop finds network, but once I click on network to connect, it does not ask for the security code therefore I can not connect to network.

Hi. I think you need to verify your router MAC Filtering. I would suggest to disable it first. Check this link,
http://linksys.custhelp.com/cgibin/linksys.cfg/php/enduser/std_adp.phpp_faqid=20600&p_created=125498...
Also, make sure you're using the latest firmware for the router. Don't forget to manage the Profile of the card as stated on the link provided above. Thanks.

Similar Messages

Connecting wirelessly with Windows XP to Airport Extreme working

I have a working wireless Network using an Airpot Extreme with most current update and my mac has no problem getting on the network. When I secure the network using 128 Encryption, my Windows machine cannot log on, it sees the netwrok but states "Limited or No Connectiviy". I have always had this problem (1.5 years), but just discovered this message board.
I believe my wireless card is a "Intel(R) Pro/wireless 2200BG Network Connection" build into my HP Compaq nc6000
Anyone have any thoughts on how to get my Windows machine to work on my wireless network with 128 encryption?
Thanks!

Accessing a Airport Network with a Windows XP PC or laptop (with XP SP2)
http://www.ifelix.co.uk/tech/1011.html
Accessing a Airport Network with a Windows XP PC or laptop (with XP SP1)
http://www.ifelix.co.uk/tech/1010.html
Problems connecting an XP PC to an Airport Base Station
http://www.ifelix.co.uk/tech/2002.html
iFelix

WRT54G Problem Connecting Wirelessly to Windows 7 Computer

I can connect to the WRT54G router with an Ethernet cable on a computer with Windows 7. I have done all the basic things or at least most of them. I can ping the router successfully wirelessly. My router is old with firmware 1.02.5. I use Linkysy EasyLink Advisor. I suspect EasyLink won't work for Windows 7. I have tried to connect manually but when I put the encryption key in it says it is not valid. I am using 128 bit WEP. Help

I'd suggest you change your encryption to WPA or WPA2 because WEP is insecure, can be easily cracked. Here's the procedure.

Problem connecting wirelessly with home hub 3.

Kodak gave me advice onthis problem. Entered security key in upper case instead of lower and it solved the problem . No help from BT on this.

paulweekspat wrote:
trying to connect kodak printer. i have resolved the issue with help from kodak. bt was no help at all. thanks anyway.
What john46 says is quite correct, also Kodak would give you NO support for setting up the Home Hub..
Thats not to say you would not have been given help on these forums if you had a problem connecting your printer and if we could not help,at least we might have been able to point you in the right direction.
http://support.en.kodak.co.uk/app/home/selected/true
toekneem
http://www.no2nuisancecalls.net
(EASBF)

Problem connecting wirelessly with HP 6310 printer

Since our computer automatically updated from Windows 8 to 8.1 a couple of weeks ago, we have not been able to use our HP 6310 printer. It connects with the computer through a wireless internet router. Have updated the HP driver to 8.1 to no avail. Any suggestions would be appreciated. Thanks.

Hey there @Benjie18 ,
I read your post about how you cannot use your Officejet 6310 printer since upgrading to Windows 8.1. I have a few ideas that come to mind that I am going to suggest and I hope they help!
1. Run the Print and Scan Doctor, which may find the problem and correct it.
2. Make sure the printer can make copies.
3. Try Uninstalling the Printer Software, restarting the PC and reinstall - HP Photosmart and Officejet Full Feature Software and Drivers
Let me know the results. If you run into any issues or errors, let me know!
Have a great day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Problem connecting wirelessly from iMac to NETGEAR router, get invalid password message with WPA and WPA-2 encryption in place but if I remove them, so no security, can connect without a problem. Help!!

Problem connecting wirelessly from iMac to NETGEAR router, get invalid password message with WPA and WPA-2 encryption in place but if I remove them, so no security, can connect without a problem. Help!!

Thank you for your suggestion but I have already had a couple of phone sessions with NETGEAR support and they don't see any problems with the router settings etc. They referred me to Apple support, who helped me discover that it is possible to communicate with the router but only if I turn off the encryption/security software, which I don't want to do. The frustrating thing is that I can connect wirelessly from a laptop running Windows 7 and two Anroid smart phones, with WPA-2 in place, without a problem. Do you have any other ideas?

Hp laserjet Pro 200 M276nw won't consistently connect wirelessly with iMac

I'm on my second brand new hp laserjet Pro 200 M276nw in 3 days, it will not consistently connect wirelessly with my newly purchased (8days old) Apple refurbished 27" iMac on OSX 10.9, i7 chip & Fusion Drive. The hp laserjet will sometimes connect wirelessly immediately after clicking "print" on the iMac, but about half the time it says "printer not connected" & takes 2-4 minutes (or longer) before the devices do connect. I've called hp support many times, they're reset various things via remote takeover of my iMac, the printer will work for a few of minutes but then the same problem returns. AppleCare made sure I have the
correct Airprint driver installed & also checked my settings, but says they don't know why this is occurring. I've also verified that our newer (6 months old) AT&T router is functioning correctly.
My older hp laserjet (CM1312nfi MFP) has worked flawlessly since 2009 via USB connection with my old iMac (still on Snow Leopard), I assumed it would continue with the new one, but there is no software update for Mavericks & the scanning feature won't operate on the new iMac. Hp says it is a discontinued model. The new hp laserjet is a successor model to the older one, they are both very similar except for the new wireless feature.
I can print fast & wirelessly from the new iMac via a different new hp inkjet printer (8600 series) here in the house. This inkjet printer is less than a month old, I installed it myself for a Windows laptop here, it has never malfunctioned. Unfortunately it's upstairs & I do not like inkjet print quality, I need a good laserjet here in my office downstairs next to my iMac.

HI there
Did you manage to sort this issue out - as I have exactly the same problem.
Lots of similarities as I also have an inkjet 8600 which works via USB and wirelessly no problems at all!
I always buy HP printers as they are usually easy to set up - but this one is making me tear my hair out!
I've even upgraded to Yosemite and downloaded the new drivers from HP - no success. The printer will print one page and then become unavailable.
I can print via USB or wireless direct - but not just via my wireless network which is what I want to do!
No responses posted - so assume no one has a fix.
aaaargh!!!

My time capsule seemed to have given up so I have just got a net gear router, I have no problem connecting wirelessly but when I connect an Ethernet cable it says it's connected but pages will not load

My time capsule seemed to have given up so I have just got a net gear router, I have no problem connecting wirelessly but when I connect an Ethernet cable it says it's connected but pages will not load

Do a factory reset .. nothing will be deleted from your backups and you will be able to get access to them again.
The Factory Reset Gen1-4.
Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.

Adobe Connect issues with Windows 7

Has anyone found a solution to the problems Adobe Connect has with Windows 7?

Sounds like something is blocking network traffic. I'm not aware of any Windows 7 specific issues. I've used Windows 7 with connect for 2 years with no Windows specific issues.
I'd call support at 800-945-9120 and see if they can indentify the issue and give you a resolution.

Having problems connecting wireless?

Hi All,
I just got my MACBOOK two days ago and having some issues connecting wireless.. I can connect to my LINKSYS wireless router but it seems after about 7 mins of use I can no longer connect to the router. I have reset the router and even changed it but I still seem to have the same issue.
If I use only PC's on my wireless network I don't have any issues.. It seems like the MAC messes up my network and it will not work again unless I take the power out of the router and then modem.
I have used my comp at a friends house connecting to their linksys router without any issues.
ANY IDEAS?
THANKS

If you have no problems connecting wirelessly on another network, then I'd look at your router as the probably culprit. Do you have any problems connecting to the router by Ethernet cable? Are your Network preferences configured properly? Have there been any firmware updates released for your router that you have not installed? Have you tried a different router in your home network? For example, try a D-Link DI-524. I've had good success with it. I've never had a really satisfactory experience with LinkSys, but that's my personal experience.

I have a problem connecting Muse with business catalyst.

I have a problem connecting Muse with business catalyst. When I start the publication is presented with the following message: Timeout when accessing with Adobe ID. Check your network connection and try again. But the connection is working properly.

Hi Federico,
Please go to Edit > Preferences in Muse and make sure the "Publish with Account" has the creative cloud subscription Adobe ID.
Regards,
Aish

How to make my pixma ip 90 to work wireless with windows 7/64

how to make my pixma ip 90 to work wireless with windows 7/64 i installed the bu-10 it is authorized but can't make it to print wireless.

Hi again manny2249,
If the Bluetooth Settings feature does not appear on the Canon iP90 Setup Utility screen, the Bluetooth unit may not be installed correctly. We recommend contacting us via one of the support methods listed at the Contact Us link below for assistance with setting up the printer via Bluetooth.
If this is a time-sensitive matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

HT1860 my apple tv (1st gen) has worked fine for a year/ All of a sudden it has stopped displaying any movies or tv. It only displays my movies or my tv that has been previously down loaded. however it appears connected wirelessly with good strenght. Any

my apple tv (1st gen) has worked fine for a year/ All of a sudden it has stopped displaying any movies or tv. It only displays my movies or my tv that has been previously down loaded. however it appears connected wirelessly with good signal strength. Have tired swithing off both router and apple TV. Any ideas?

This is a known, ans ongoing issue. Rest assured you're not the only one affected. There are several threads here already discussing this, I suggest searhing them out if you want more details, and possible work-arounds for locally hosted content.

Problem connecting wirelessly to TC with Windows computers

This is not a new problem for me. I connect to my TC with ethernet. I connect with my ibook wirelessly with NO problem. However, I can't connect with an XP machine upstairs (great signal btw) Nor can my daughter connect via her new laptop with Vista (we had words about that purchase). I have my TC set up wep, via N (b g compatible). When we enter the password, all we get is an "connecting" that never connects. It sees the TC just fine, and reports it as wep and N configuration.
Anyone have any ideas?

Happy to help.
I have an idea. Since you can "see" the wireless network from the PC it may be a password issue. Different companies do not use the same formula, or algorithm to be more more accurate, to generate the actual code when you enter your password.
For example, when you entered your password for the Time Capsule in AirPort Utility, it was converted to a long complex code of numbers and letters using Apple's code generator.
The PC manufacturer is probably not using the same algorithm, so although you are entering your "password" correctly, it is being changed to a different code which the Time Capsule interprets as incorrect and you get the log on error.
Open AirPort Utility to the Wireless page again and click in the area where your password is shown as a series of dots (do not change anything, just click in the box). Now go click on the Base Station menu at the top of the screen and click on Equivalent Network Password. You will probably see a very long code.
I think that this is the code,or password you will need to enter when you are trying to log on with the PC. Give it a try and post back on your findings.

I have Snow Leopard 10.6.8 on my MacBook. Constantly dropping internet connection or message "error connecting to the network" comes up. No wireless connectivity issues with windows 7 laptop or iphone.

I have a MacBook with Snow Leopard 10.6.8. The last few weeks it has been constantly dropping internet connection, and one of these messages appear on the page: "Safari cannot open this page because the server where this page is located isn't responding" or "Safari cannot open this page because you are not connected to the internet" comes up. I will check Wifi and I am connected. No wifi connectivity issues with iphone or windows 7 laptop, this doesn't happen with either of those devices. I have unplugged and reset router, cleared cache, still happening. Any ideas? Thanks in advance.

Hi BCLor!
Try using the suggested steps in the following article to help you troubleshoot this issue with your Wi-Fi connection:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

WRV54G - Problems connecting wirelessly with Windows 7

Similar Messages

Maybe you are looking for