WRVS4400N accessing local services via external IP

Hello everyone,
Recently I'm having issues with accessing local services via external IP. Short description of configuration:
- sub.mydomain.com pointing to my external IP.
- few web services running on my local server with reverse proxy on Apache 2
- firewall on router enabled
- ips on router disabled
- single port forwarding: WAN 80->Lan 443, WAN 443->LAN 443
- accessing my services via sub.mydomain.com/service1, sub.mydomain.com/service2, etc
- I had to create a new rule in internet access policy allowing LAN, any, any to
Basicaly if I go no matter if I type http or https I will be redirected on 443.
That configuration has beed working without any issues for a month. Recently I have increased the amount of DHCP users and suddenly it's not working any more. I can still access my services from outside but not from LAN.
Restarting router does the trick for a while, sometimes for few minutes, sometimes longer.
Enabling IPS is the way to go but then I'm limited to around 22Mbit/s.
I did almost everything what is possible to solve this issue, I'm lost and frustrated. I have no idea what happend.
What I can't understand that it was working, suddenly it's stopped and there are two solutions, either to enable IPS or to restart router which to be honest aren't the solution I'm looking for.
Please help me point the problem.
Thank you in advance
Best regards
Bartek

Hi, My name is Eric Moyers. I am a Network Support Engineer in the Cisco Small Business Support Center.
I recieveed your email and have looked at your posting. This seems like it may be more complicated that what should be handled in a chat. Could you please call into the the Small Business Support Center for support.
Check the listings on this link and contact the center nearest you.
http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
If you are in the US, please call 1-866-606-1866, and any answering agent should be able to assist you.
Eric Moyers
Cisco Network Support Engineer
CCNA, CCNA-Wireless
1-866-606-1866

Similar Messages

Access local disk via Java Web Start??

HI all ,
I had saw the JWS document.
It indicate we can't access local disk via JWS in that Security.
If I need to access local disk by command, does anyone have better suggestion.
And can I run *.bat via Java Web Start?
Thanks very much for your help.
Morris

I do the both thing but still don't access to Local disk.
I just write a simple test class within extend another that create a file (and of course sign it)but still can't create a file Local disk. this MAKE ME MAD and LOOSE MY JOB .
here is my JNLP file:
<?xml version="1.0" encoding="utf-8"?>

<jnlp
spec="1.0+"
codebase="file:///d:/"
href="test.jnlp">
<information>
<title>Me</title>
<vendor>myself</vendor>
<homepage href="http://www.me.com"/>
<description> test test test</description>
<description kind="short">Test creatin of log file on client </description>
</information>
<offline-allowed/>
<security>
<all-permissions/>
</security>
<resources>
<j2se version="1.4"/>
<jar href="test2.jar"/>
</resources>
<application-desc main-class="secMan.Test"/>
</jnlp>

404 error while accessing sicf services via apache reverse proxy

Hi,
I set up an reverse proxy with apache 2.2 and try to access SICF Services via this proxy. I got the following error message from the sap system:
Service cannot be reached
The termination occurred in system SMP with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:NE-SSMP01_SMP_00-v:0-s:404-r:Notfound
When I access J2EE services via the proxy it works.
Is there any configuration which have to be done in the ABAP Stack for accessing Services via the proxy server?
For tests I tried to access the simple ping service ( /default_host/sap/public/ )
Thanks and best regards,
Tim

Hi Oliver,
I allready checked the SDN posts for the reverse proxy. Maybe I missed something.
The ProxyPreserveHost is on.
I redirect to the ICM. I only redirected to the J2EE for tests. This worked by the way withe the same conifiguration.
Here is my apache config:
VirtualHost *:5443>
        ServerName      domain.com
        ServerAdmin     test.de
     ProxyPreserveHost On
     #ProxyVia On
     #AllowEncodedSlashes On
Rewrite Rules
- forward sap/public/ping?sap-client=001 -> Test Ping
- Passthrough /sap/public/ping/*
- Redirect any other URL -> Test Ping
        RewriteEngine On
        RewriteRule     ^/sap/public/ping?sap-client=001$     /sap/public/ping?sap-client=001          [R,L]
     RewriteRule     ^/sap/public/(.*)                     /sap/public/$1                    [PT,L]
     RewriteRule (.*)                               /sap/public/ping?sap-client=001          [R,L]
     RewriteLog logs/rewrite_SMP.log
     RewriteLogLevel 3
Reverse Proxy to
- Disable Forward Proxy
- Allow Connections from All
- Reverse Mapping for 302 Response
- Forward / Requests to domain.com:8000
        ProxyRequests Off
        <Proxy *>
                AddDefaultCharset off
                Order Allow,Deny
                Allow from all
        </Proxy>
Forward Rules
     ProxyPass             /sap/public/ping          http://domain.com:8000/sap/public/ping?sap-client=001
     ProxyPassReverse      /                    http://domain.com:8000/
</VirtualHost>
Best regards,
Tim

Accessing Web Service via Bluetooth

Hi,
I'm developing a client for a web service which is running on my system.
Can I access this web service via bluetooth.
Thanks

I can give you one solution not direct but in some tricky way you can achieve what you are trying to do.
1. Built a client application in Java and run it as a service in your laptop and will be communicate with your application at the mobile end.
2. Send some triggering command to that application(the service you are running in laptop) from your mobile which will access the web service and perform the action you want your web service to do and send the result over bluetooth to your mobile app.
In this case instead of using the bluetooth directly to access the web service you are making one proxy application to perform. Hope this solution will help you out to move ahead. Let me know whether it works for you or not.
Shan!!!

NW Business Client and accessing SAP services via web pages

Hi all,
We currently use Business Connector to access our SAP environment via web pages. We looked at NW eSOA but decided against implementing it. Does Business Client offer anything that helps access SAP apps and data from a custom web site better the Business Connector?
Thanks in advance,
Tom

Tom
I am assuming you are using SAP Business Connector in your landscape to connect to back end SAP systems from your web applications. Your question now is that if business client can let you access SAP data for your web pages instead of the business connector. Point to not here is that Business client, as the name implies, is just a client with single point of access for SAP screens. That means, you can access traditional SAP transactions, WebDynpro screens, BSP pages, Portal screens etc in one single client. In very raw terms, Business client acts (or replaces) as your browser. It is not going to provide you any out of the box integration with backend system rather just act as a window. You options at this point are
1) Use your existing webpages but instead of getting data from the backend system through business connector, get the data using webservices.
2) Use PI as middleware tool and get the data from backend SAP system
3) Stay were you are but deal with high cost of ownership.
Thanks
KK

Accessing Jini Services via EJB

Does anyone out there have a good link to a website or tutorial where I might find an example of how to talk to Jini via an EJB?

see your jini post

How can I access HTTP services via Extendscript from PPro CC

I attempting to build an HTML5 panel for Premiere Pro that retrieves assets from a third party REST API but there seems to be no support for Socket or XMLHttpRequest objects in this application which there is for others. (I get Error: Socket does not have a constructor)
How would I go about making these requests in Extendscript?

Hi schallis,
I am also looking into using sockets (creating a socket server in Premiere) from my HTML5 panel, but am also getting "Socket is not defined" when running it in the context of Premiere.
I think you are mixing up the Javascript engine that is in CEF (Chrome Embedded Framework, which runs the Javascript in your HTML panel), and CEP (Common Extensibility Framework, which runs JSX code). The Socket class in question belongs to the CEP side of things. so the lack of it in CEP doesn't mean that you can't use web sockets (if they were supported) in the CEF side.
I am fairly certain jQuery doesn't do sockets, so it would be an XmlHttpRequest if using jQuery.

I am using Adobe Reader with paid up service through May 2015. When I attempt to convert a file from PDF or to PDF, I get the message "An error occured while trying to access the service. What do I need to do to access the service paid for?

I am using Adobe Reader with paid up service through May 2015. When I attempt to convert a file either to PDF or from PDF, I get the error message, "An error occurred while trying to access the service". What do I need to do to get access to the service I have paid for?

Hi DeaconTomColorado,
Please see "Error occurred when trying to access this service" when logging on to Acrobat.com.
Adobe has just released an update to Adobe Reader, so if you're accessing the service via Reader, please let us know whether the update helps resolve the issue.
Best,
Sara

An error occurred when trying to access the service

I'm asking myself why I purchased a one year subscription to Adobe Reader to convert PDF files to Doc files, when it NEVER WORKS and no one seems to be able to help me!!! I am on a Mac Book Pro with Yosemite (don't upgrade it slows your Mac badly) and whenever I try to convert a pdf to a doc I get 'an error occurred when trying to access the service', can anybody help me please?

Hi Cedric,
The customer service number is 800833687
The direct link for chat support is: http://adobe.ly/19llvMN
You need to click on 'Still need help' to initiate the chat session.
Are you getting this error: "an error occurred when trying to access the service" while trying to access the service via Reader.
Try using the link: https://cloud.acrobat.com/exportpdf sign in with your Adobe ID and try to convert a pdf to doc and check if that works for you.
Reards,
Rave

Accessing Integration services

Can anybody help me out in accessing Integration service via web. I need the URL.

I might be wrong here, but I think EIS is a client/server application.
There are currently no web services/sites exposed for the EIS client tools.
You will not be able to access the client tools through a URL.
You might be able to access your data sources via an http connector for the relational databases.
But I don't think this is how the product was originally architected.
Brian Chow

If i connect an external hard drive to a time capsule, can i access this drive via internet?

If i connect an external hard drive to a time capsule, can i access this drive via internet?

If the drive can be accessed in local lan, then it can be accessed from internet assuming you have setup using one of the remote access methods.
See remote access here.
https://discussions.apple.com/community/wireless/airport?view=documents

External Meeting Content access Lyncweb services URL vs Meet simple URL

So im really confused, i have my 2013 lync single server front end pool, i have my 2013 edge server and a i have a ISA2006 server as my reverse proxy, i think i have traffic flowing as i want to but i seem to be running into one last issue.
The DAMN MEET URL and the EXTERNAL WEB SERVICES URL
So both of these are set to point at my reverse proxy. i can see that when i access a meet url externally via the meet url it calls the external web services url, i can tell because it fails on the certificate i have set on the reverse proxy listener for
the external meet url.the reverse proxy takes the 443 request and shoots its off to 4443 on the front end external IIS site on the front end pool and that seems to work
So what do i do? clicking the meet url is calling the external web services url, which is failing on the certificate, of course as the web listner on the RP is listening for the MEET URL, i have no intention of purchasing public certificate with a SAN for
the external web services url, that seems overkill to me, is there something im not getting here?
Do I need the external web services url? im really only wanting to be able to send meetings to clients outside our domain with no access to it to be able to connect to remote conference, which makes me ask a second question, do i really need the edge server
in place then either?
thanks guys!

You cannot leave the external web services FQDN out of the certificate.
While the External Web Services FQDN and the Simple URLs may not always point to the same IP in larger scaled deployments, in smaller deployments they will be the same. But you cannot just pick one and omit the other because you feel that they are
redundant.
Lync clients are programmed to use both URLs at different times and both FQDNs must be included in the certificate's SAN field to meet the TLS security requirement otherwise some things will not function correctly.
You also must have the Edge Server in place and correctly deployed otherwise your external meetings will have no audio, video, or application sharing capabilities. You'll basically be limited to hosting web conferences with only whiteboarding. You'll
also need to publish a WAC (Office Web Apps) server to support PowerPoint sharing in these meetings as well.
In short you cannot simply pick and choose which server components are deployed, you need all of them and they need to be configured following best practice guidelines to have any semblance of a successful user experience.
Jeff Schertz | Microsoft Solutions Architect - Polycom | Lync MVP

ITunes Library access via external HDD w/ AirPort Extreme

Ok wizards... I've read a number of posts, but can't seem to pull together the answer to my question and hoping someone's able to push me in the right direction.
I've got a Windows 7 PC with my iTunes library stored on an external HDD due to it's size. My PC is often not at home (i travel for work a lot) and would like to have my library available to my family via my Apple TV when i'm not there. So... I'm contemplating buying an AirPort Extreme and connecting the HDD. I have read that the HDD must be formatted to FAT32 for it to function w/ the AirPort extreme (seemingly an arduous step, but surmountable) but can't seem to find a clear answer to the question:
Will I be able to access my Library via the Apple TV via this method? Obviously any tips / tricks would be greatly appreciated and thanks (in advance) for anyone who can help!
Vince

Will I be able to access my Library via the Apple TV via this method? Obviously any tips / tricks would be greatly appreciated and thanks (in advance) for anyone who can help!
No, at least not directly. You would still need an iTunes "server" to stream the iTunes media to the Apple TV. Typically a iTunes server would be a Mac or PC computer running iTunes.

Reading terms and conditions page 3 of new account for iTunes Store before I put in US$ voucher purchased in Zimbabwe. If I'm traveling world wide, willI still be able to access the US services via this same account?

Reading terms and conditions page 3 of new account for iTunes Store before I put in US$ voucher purchased in Zimbabwe. If I'm traveling world wide, willI I still be able to access the US services via this same account?

You can only use the US store if you are in the US with a US billing address on your account - the US store's terms of use (and they will be similar for all countries) :
The iTunes Service is available to you only in the United States, its territories, and possessions. You agree not to use or attempt to use the iTunes Service from outside these locations. Apple may use technologies to verify your compliance.

I can not access local pics on my z10 via BlackBerry express and other apps that can share pics.

While sharing or editing or using pics on apps such as BlackBerry express Whatsapp bbm etc,I cannot access local pictures. When I tap on add picture or share picture, the light gets dim for a second so as to open gallery but nothing happens then. My z10 is running on bb 10.2.1.3062

In Disk Utility, you should see an icon in the drive list representing the external drive. Below that is an icon for each volume on the drive. One of those is the Time Machine backup volume. If there are no others, then there is no other data on the drive, at least none that you can get to.

WRVS4400N accessing local services via external IP

Similar Messages

Maybe you are looking for