WRVS4400N - ssid vlans are not working

I've been searching high and low and although I've found many results of people having this same exact problem there doesn't seem to be a fix, or at least no one was kind enough to post one.
Background:
I have many vlans but the 3 in question are 10, 20, 30.
10 is for my laptops and desktops with an ip range of 192.168.10.10 - 192.168.10.50.
20 is my home automation network with an orange of 192.168.20.20 - 192.168.20.150
30 is my guest network with a orange of 192.168.30.84 - 192.168.30.89
I have a dell powerconnect configured with vlans as my core switch. I trunked a port on the switch assigning 3 vlans (10,20,30) and connected it to port 1 on the wrvs4400N. On the wrvs4400 I trunked port 1 tagging vlan 10,20,30. For some reason vlan 1 is untagged on port 1 and I don't know why.
I also have a router connected to the powerconnect. Of the 3 vlans I mentioned vlan 10 and vlan 30 are the only ones with interfaces on the router. Vlan 20 is an internal network with a separate router and until I figure this out that router is physically turned off. Also the router currently turned on has no routes configured to connect my vlans. Currently there is no configured way to jump vlans.
I created 4 ssid on the wrvs4400N. Private, home, guest, and wrvs.
private - is assigned to vlan 10
home - is assigned to vlan 20
guest - is assigned to vlan 30
wrvs - is assigned to vlan 1 - this is temporary until I can get this working. I want it so the only way to manage the wireless is to walk over to it and physically plug in.
There are a couple DHCP servers.
Vlan 10 has a windows server 2008 r2 dhcp server.
vlan 20 uses it's powered off router for dhcp
vlan 30 uses the main router connected to the power connect
vlan 1 on the powerconnect uses the main router - this dhcp scope is only used until I'm done with my rebuild since I don't plan on actually using vlan 1 - the scope is 192.168.2.0
dhcp is turned off on the wrvs4400.
on the wrvs4400 I made sure to turn off inter vlan routing, and I enable ssid isolation.
The problem:
No matter what ssid I connect to I get a dhcp response from vlan 10. all my test indicates that I'm actually on vlan 10. I get internet and I can hit all devices on vlan 10. If I connect to ssid guest and change my ip address to match vlan 30 I can not ping the gateway for vlan 30 and I have no internet access. Some times I get something different. Sometimes I get an ip address from vlan 1 on the powerconnect. If I renew my ip address then I'll grab one from vlan 10 but I should be getting one from 30 or none at all for vlan 20. The absolute crazy part is my droid sometimes gets a 192.168.4.x ip address. I don't have a 192.168.4.x network or dhcp scope anywhere on my network! If I physically plug into a port on the power connect I get to the correct network 10 out of 10 times. If I configure vlans on the other 3 ports on the wrvs4400 and physically plug in, I get to the correct network 10 out of 10 times. Over the wireless all hell breaks lose.
I've reset to factory a few times and I've been all inside and out of the wrvs4400. I have no clue what could be wrong with this thing. Please help!!!
More info is available upon request.
Thanks.

Kerwin,
There is a bug with these units- you will need a different unit for your current configuration to work properly. Since you're utilizing other DHCP server in your topology; this isn't the best unit for you. Please call into support center @ 1-866-606-1866 for further requests.
Thanks,
Jasbryan

Similar Messages

  • RADIUS-assigned VLANs are not supported when you enable multiple BSSIDs

    Could someone please tell me is this 100% correct?
    "RADIUS-assigned VLANs are not supported when you enable multiple BSSIDs"
    Any ideas why? Does anyone have a way around this?
    As a workaround I was thinking of setting up one broadcast SSID for guests and one non-broadcast SSID for RADIUS assigned VLANs, however i'd prefer to have both broadcast due to numerous Vista and PDA connection issues.

    Hi.
    Thanks for your reply.
    That is what I would like to do; have one SSID and assign the users to different VLANs based on policy.
    I have all the VLANs and subinterfaces set up correctly and working independently, but the VLAN assigment does not seem to work correctly.
    If I do a "show dot11 association all-client" the RADIUS attribute appears to have altered the VLAN, but the device has no connectivity and cannot DHCP.
    This is with 1130AG in autonomous mode and Microsoft IAS as RADIUS.
    Apparently there may be a problem with mbssid and RADIUS assigned VLANs.

  • HT201401 my earphones are not working on my iphone4 to play, stop or forward to other tracks or answering a call and i know its not the earphones as ive just paid out for a new pair at £27.99 and still wont work anybody got any advice as fed up honestly

    anyone can you help my earphones are not working on my iphone4 and i know its not the earphones has just bought new pair and no joy  I can not play, stop, forward to different tracks or anything cant answer call nothing end of ideas can anyone help pretty please

    Yes there genuine apple earphones I have now blown down jack slot and silly enough I turned my phone off and now it's back on earphones working properly now feeling a wee but silly as such a simple thing got them working.
    Thank you guys and I know where to come again if I need any further assistance.
    Again thank you everyone  

  • Text messages ringtones are not working in the Storm Two

    Device:  Storm Two running OS version 5.0.0.713 on the Verizon Wireless network.
    Recently, I upgraded from a Storm One to a Storm Two because of a multitude of issues with the Storm One; not enough memory, constant lock-ups; dropped calls, etc.  On the Storm One I had customer ringtones for contacts; so when a contact calls me the phone will sound a specific ringtone for that contact; the same for text messages from that contact. Now that I have the Storm Two the text message tones for the contacts are not working. In fact, even when I select a ringtone for text messages for a contact the phone will ring the generic ringtone that comes with the phone. If I go into the sound profile and change the generic ringtone to one of my own and the contact sends me a text/sms message the phone will ring the ringtone that I selected in the profile that is being used at the time. This is not the way it worked on the Storm One.  On the Storm One; if I have a specific ringtone for the contact and that contact sends me a text message it will sound the text messages tone for that contact. These ringtones have worked for previous devices including my Treo and Palm devices. The ringtone files worked well in the previous Storm One.
    So to make a long story short; I want to know why my text message ringtones are not working as designed/setup-up. If a contact calls me the phone will sound the ringtone for that contact; but if that same contact text me it will not ring the ringtone for the contact. This is annoying and I am at my wits end trying to find out why this is not working.
    Vernon

    Hi Jain....
    Field separator is for separating the fields.That means it will effect every field in the node.
    But end separator is not like that.It will apply at the end ofall fields of a node.It will effect node not a field.
    according to ur scenario if u use data.endseparator 'nl',output will come like this
    2008/0701$101
    2008/0701$102
    2008/0701$103
    2008/0702$105
    if u want new line for every field try to insert a separate node for second field.That means
    MT_DATATYPE:
    Data -
    1:UnBounded
    . .OrderDate----
    1:1
       <Data2>                   1:1
    . ....OrderNo -
    1:1
    now give data.endseparator  'nl'
                data2.endseparator 'nl'
    if possible try like this....
    Sreedhar Goud L

  • Page Break In XML Publisher RTF Templates Are Not Working

    Please refer to the Metalink Doc below:
    Subject:      Page Break In XML Publisher RTF Templates Are Not Working.
    Doc ID:      559111.1      
    Type:      PROBLEM
    Modified Date:      24-MAR-2008      
    Status:      MODERATED
    In this Document
    Symptoms
    Cause
    Solution
    References
    This document is being delivered to you via Oracle Support's Rapid Visibility (RaV) process, and therefore has not been subject to an independent technical review.
    Applies to:
    Oracle XML Publisher - Version: 5.6.3
    This problem can occur on any platform.
    Symptoms
    Using XML Publisher version 5.6.3 in 11.5.10.
    Find <?split-by-page-break:?> syntax is ignored.
    EXPECTED BEHAVIOR
    Expect page breaks to occur at point set by "split-by-page-break:" code.
    STEPS
    The issue can be reproduced at will with the following steps:
    1. Create a template.
    2. Call split-by-page-break: inside a loop.
    3. Output is not formatted correctly, page break call is ignored,
    Cause
    Unpublished BUG 5011628 SPLIT-BY-PAGE-BREAK NOT WORKING IF ADDED SORT WITHIN DYNAMIC GROUP
    Unpublished BUG 5011628 matches the client issue as it is a call to split-by-page-break inside a loop.
    Fix is in ScalableStringList.java version 115.4.
    This is delivered in <Bug 6165466> XDOFX:CHR(N) FUNCTION FAILING.
    Solution
    To implement the solution, please execute the following steps:
    1. Apply Patch 6165466 when it is released.
    2. Test your report.
    References
    Bug 6165466 - XDOFX:CHR(N) FUNCTION FAILING
    Keywords
    XML~PUBLISHER; LOOP; DYNAMIC~GROUP; PAGE~BREAK;
    Help us improve our service. Please email us your comments for this document. .

    Hi JDev,
    Check this out:
    http://oracle.anilpassi.com/xml-publisher-developing-reports-printed-on-pre-printed-stationary-2.html
    Hope this might help.
    Thanks

  • Help needed I updated my ipad2 with iOS5 but few of my dashbaords are not working now can any one let me know how to downgrade the OS

    Help needed I updated my ipad2 with iOS5 but few of my dashbaords (HTML5) are not working now ,can any one let me know how to downgrade the OS as we have a meeting coming up .. its urgent

    Downgrading the iOS is not supported. If you are using Safari this try clearing its cache via Settings > Safari.
    If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Keyboard and trackpad are not working, Keyboard and trackpad are not working

    I'm using MBP 15" late 2008 with Maverick OS. A couple of days ago, the internal keyboard and trackpad are not working at all. I did all the troubleshooting. I even reformat it; installing the snow leopard and re-installing the maverick but no good result. I believe there's no problem with my keyboard because i can still do PRAM on my lappy. Everytime i'm booting up my MBP, it always looking for bluetooth trackpad and keyboard. I have not used those bluetooth peripherals from day 1 i've started using MBP. I just read on the internet about the same problem has happened on MBP 13" retina and APPLE fixed it by updating the software. I wish Apple will also do something for the old MBP to fix the intermal keyboard and trackpad problem.

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

  • The MSS ECM FPM Steps are not working after the upgrade

    Hi all,
    The MSS ECM FPM Steps are not working after the upgrade. We use Java Webdynpro and MSS ECM (SP17), version 603.
    On cliking the FPM steps, nothing is happening, however we can navigate using the buttons.
    But this functionality was working before the upgrade.
    Please let me know what should I do.
    Thanks,
    Sarayoodharan.K

    clinet provided in the backend system was not correct during SSO certificate using tx-code strustsso2 -  Cleint should be 000

  • How to delete video from iTunes library? del and shift+del are not working - no any reaction

    how to delete video from iTunes library? del and shift+del are not working - no any reaction.

    seb963 wrote:
    Hi
    Currently, iMatch is turned off on my computer, as I do not want to upload any more songs. If I turn it on, will it upload all songs that are currently in my library? Is there another way that deleting them one by one?
    You must enable iTunes Match on the new computer. The best way to accomplish what you want to do is to create a new, empty library by launching iTunes while holding down the Option key (Shift on Windows) and choosing "new library." Do not let iTunes scan for new content, but do enable iTunes Match on the empty library. Once the scan is finished you may delete tracks from the cloud. When you are done switch back to the main iTunes library.

  • Some of the shortcut keys and directional keys on the keyboard are not working in FF 4 RC1 (i.e. Tab, Ctrl+C, arrow keys). They work fin in FF 3.6x and other applications.

    Crtl+C, Ctrl+V, Ctrl+X, Tab, and arrow keys do not work at all in FF4.0b13 and later. I am not sure about earlier versions as this is the first version I have tried.

    I found this helpful article (http://support.apple.com/kb/TS1381) and worked my way through the section "Some keys don't work as expected".
    All the following functions/settings are disabled or turned off:
    Text to speech / Speak selected text when the key is pressed
    Slow Keys
    Mouse Keys.
    The keyboard viewer just confirms my list of keys that are not working.
    Starting in safe mode makes no difference; nor does booting from the Mac OS X Install Disc and running Terminal from the Utilities menu. The same keys as before fail to work.
    This seems to confirm that it's a hardware issue. Anyone have any suggestions?

  • Alerts sounds are not working after upgrading to iOS 7.1.2

    Hi,
    I've noticed that all the alerts sounds are not working anymore after upgrading my iPhone 4S to iOS 7.1.2
    I’ve reviewed similar posts regarding the same issue; and it seems this is a common issue in iPhone 4S when upgrade to iOS 7.1.2.
    Apple, please Advise if there anything I can do to resolve the issue especially that my work deepens on the push emails and alerts that requires prompt response.

    I got this issue resolved.
    It caused due to some dirt in the charger slot; such dirt caused the phone to assume as if it is connected to a car kit and that is why it does not produce any sound except the Ringer and the Alarm.
    It has been fixed by cleaning the charger slot by toothbrush! with some
    drops of a cleaner.
    Do not do it by yourself, as it might be a risk; rather, let it to be done by an expert.

  • Formula Columns are not working in Reports 10g

    Hi,
    We converted the reports developed in Reports 6i to Reports 10g. When we run the report in Reports 10g Builder everything works fine. But when we deploy the same report in Oracle Application Server and invoking the report the formula columns are not working ie., the fields/ placeholder columns which are based on the formula column are not displaying any values in the report.
    Please, someone help us in this regard.
    Thanks & Rgds,
    M T

    What version of Reports do you use..???
    Greetings...

  • HT4623 Hi there, yesterday I updated Facebook and Viber. They are not working,Viber shows waiting and when try to launch Facebook all I get is a BLACK page. Help please

    Hi there,
    yesterday I updated Facebook and Viber, they are not working.
    When I launch Facebook all I'm getting is a BLACK page and Viber is highlighted in grey and showing "waiting".
    Help Please Please Please

    Hello rulawa,
    You may want to take a look at some of the standard troubleshooting steps for App Store apps found in the article below.
    iOS: Troubleshooting applications purchased from the App Store
    http://support.apple.com/kb/ts1702
    Hope that helps,
    - Griff W.

  • Email notifications are not working anymore

    Hi guys,
    I use Grid Control 10.2.0.2 on Windows, and email notifications for critical alerts are not working anymore.
    I didn't change anything to the OMS configuration, it just stopped one day, and when I ask for a test email (in "Setup -> Notifications methods" of in "Preferences") it is successfully delivered.
    I didn't find anything related to this in log files, and nothing that could help here or on metalink.
    Can anyone help about that weird issue ??
    thanks in advance
    Antoine

    Have you gone back over your notification rules?
    have you tried just creating a new notification rule and testing it?
    Also take a look at Note:356774.1. If you've applied any patches (or done partition maintenance) you may have inadvertently lost all your jobs, which will break the email notications.
    If still no joy, then try Note:285093.1.
    let us know how you get on.

  • On my macbook pro I have a message on my homepage telling me that certain items want to use my keychain. I've pressed cancel the message will not go. The mac is now running very slow and iphoto and safari are not working. Can anyone help?

    On my macbook pro I have a message on my homepage telling me that certain items want to use my keychain. I've pressed cancel the message will not go. The mac is now running very slow and iphoto and safari are not working. Can anyone help?

    What version of Mac OS X?
    What home page?
    What browser?

Maybe you are looking for