WRVS4400N v2: IPS SIGNATURES || 365 days without an update??

Good day!
I wanted to know how often Cisco determines it should be releasing new updated IPS signatures to ensure customers are being adequately protected from the latest threats? That is for those of us who choose to use the feature.
https://supportforums.cisco.com/message/3419502#3419502
As you can see in the last posting about this very issue, it took Cisco over 365 days to release one signle IPS file.
Is the IPS file comparable to a virus definition file? Or does the IPS file simply not require being updated by Cisco... for years at a time.
I'm finding that development on updated IPS files are being neglected by the Cisco development team.
It will soon be comming up to August 9, 2012. That will make the last published IPS update 365 days old.
Thanks for any insight you may provide.
Sincerely,
Christopher Laurie

We should all get regular IPS updates, but I undersand some of the reasons why it could be tough to provide IPS signature updates for your device. Basically you have an IPS *on/off* switch. Therefore they have to be certain that ALL of the signatures aren't too sensitive. Otherwise you would be forced to turn the functionality 'off'.
The SA500 Series routers have a little more flexibility to configure IPS. IPS signatures can be turned on/off at the signature-level.
The enterprise-level IPS modules have 10 times the flexibility, are much more robust, and are highly configurable. Custom IPS signatures can even be created by the end user.
All in all, we are dealing with 3 different types of IPS signatures and IPS engine implementations. That said, your device really needs IPS signature updates at least 3 or 4 times a year to be effective. We used to have a WRVS4400N v2 so I understand where you're coming from.

Similar Messages

WRVS4400N - firmware issues and IPS signature update messages

On my WRVS4400N with Firmware Version: V1.1.03 I keep getting the message:
"Your Signature Version is beyond xxx days. Please Update it!"
Cisco/Linksys: about time to update the IPS signature, because I always have the latest available, but you don't update it anymore.
Besides: there are a lot of known issues with this router, but you don't provide us with a new firmware. OK, I did find a beta WRVS4400N_v1108.img on rapidshare, but is this really a Linksys beta? Why don't you publish updates anymore?
I am very disappointed by your service on this matter :-(
JJ (ICT dept 2500+ employees + Cisco user)

Hi Tom,
Last night I reset the setting to factory default, reinstalled firmware v2.0.2.1 and then restored my settings I backed up. Everything worked great after that but this morning it was down again. Same thing, no network and can't log into the router and forced to cycle the power.
As a "way out there" guess, are there any compatibility issues with certain switches? One thing I did change the past few days was that I took out an older cheap 8-port D-Link Gigabit switch which was maxed-out and replaced it with a Netgear ProSafe 16-port Gigabit switch (model JGS516).
Another thing that has changed is that I have added another network by cascading a D-Link DIR-655 wireless router. I have the WAN port of this router connected to a LAN port on the WRVS4400N router. The WRVS4400N router is using IP 192.168.21.x (subnet mask 255.255.255.0) and the other router is set to 192.169.10.x (subnet mask 255.255.255.0). I may be wrong but I can't see this being an issue. ANy ideas?

How to convert Cisco IPS signatures to a MARS events - no keyword search

I am trying to run a scheduled report looking for the new Microsoft exploit under the IPS S411 release, SIGID 19339.0 and I am trying to form the query looking for the event this falls under without using a keyword search on the SIGID. Does anyone know how to correlate an IPS signature to a MARS event?
Thanks,
Mike

With the help of On-box local event correlation technology you can correlate. On-box local event correlation technology not only enables detection, but actually blocks multi-event attacks and malware in real time, complementing security incident management software such as the Cisco Security Monitoring, Analysis, and Reporting System (Cisco Security MARS) that correlate events across multiple devices.
Integrates with the Cisco Security Manager to correlate security events with the configured firewall rules and intrusion prevention system (IPS) signatures that can affect the security event

February is 29 days and offset -365 days offset is wrong

Hello
I have many key figures calculating offset periods of -365 days on 0calday interval
Today I have a problem because february is 29 days and all values with the offsets on 01.Feb.2008 until 29.02.2008 are reading/summing up the values for 01.Feb.2007 until 01.March.2007.
Is there a way to solve this without having to change the offsets in all key figures in all queries to -366?
Thanks in advance
Heloísa
Edited by: Heloísa Alves on Mar 5, 2008 10:48 AM

Dear,
Try to create a variable with User Exit----
> in that give the logic as Prevoius year to date...consult with ur ABAPer to write the logic and use that variable in ur queries then only the problem will get resolved ...
If u find the standard variable then install it and use it ...................
Regards
venu

Family Share - A CRUEL 365-day lockout, REALLY?

I bought my wife a new 128 GB iPad mini 3 on December 15th at Best Buy, I had been saving for this iPad for some time, and Lori had wanted the new iPad mini 3. Both my wife and I have bought multiple iPods over the years, use them, abuse them, and they just keep on playing through the abuse. We have brought 6 iPod of various generations through the years. I was so impressed with her iPad 3, I decided to buy myself a 4th Gen iPad. So Lori and I now both have iPads.
Lori has had her iTunes account for years, and she has bought a ton of music through her account, and we shared that music, with multiple iPod devices over the years. It worked out great. In the last two years Lori has been buying more TV Shows, and currently she has bought about 10 movies, so we watch the TV shows and Movies on our Windows Computers.
But now that both of us have iPads, well we wanted to setup family sharing. I had been hearing and semi-following all of the trouble that Apple was experiencing since the roll out of Family Sharing. I gained this awareness of the problems by reading many editorials and articles by seasoned Apple device owners in various online blogs and some major editorial sources. So I was a little leery of jumping into Family Sharing, but I read the process and I thought let’s give it a go. So a few days ago, I decided to print the Family Sharing Technical How-To Articles from the Apple Support web site. I read them multiple times and attempted to accomplish the feat. Well it turned out to be a feat a feat which is now impossible to resolve for us apparently.
I thought I understood the process, but ultimately I got confused with the whole process, although the first time I set Family Share up I had actually done it correctly but for whatever reason, it still would not allow us to share.
Bottom line I left Lori's family group, and I recall thinking to myself, maybe I need to setup myself as the Organizer thinking that this might be the way to get our sharing activated. Well I would find out later this was not the correct approach and may have sunk my ship.
So I decide to ask for help, I opened a case with Apple Support on Friday February 13th, 2015. I still don’t know what the problem is at this point, all that I know is that I cannot get Family Sharing to work. So I tell the Apple Support Representative what is going on and the Rep asks me impatiently at this point as if he needs to be somewhere else. Quote: "Why do you want to enable family sharing", (I thought REALLY)...... OKAY I admit the question just baffled me. So I said slowly…...because I want my wife and I to be able to share content back and forth with each other, I have come from a Windows world, and I told him my wife and I plan on migrating to Apple computers. So we figured we would get this whole family sharing thing all setup. I tell the Apple Support Rep that Lori my wife has a great deal of existing content, purchased as in Music, TV Shows, Movies, and iBooks. She has a lot of content, and I want access to it.
What THE APPLE REP said to me next blew me away. You have left Family Share twice, and the rules state you will not be able to enable Family Share for 365 days on the device where this occurred. (End of Story) mine!
I was not going to accept this, I wanted to have them explain the rationale for this customer service nightmare He says I don't know if we can do anything for you, but I will send it the a Tier 2 representative, and see what they say, he then says, but since it is 3:30 on a Friday afternoon, everybody is starting to leave so I am not optimistic that anybody is going to call you back today, as we are all leaving. Then the young man stated the best we can do at this point is to talk with you on Monday. So I accepted this, I made certain he had my correct cell number and although frustrated, I waited till Monday.
So when Monday February 16, 2015 rolls around, and I hang by the phone all day, no contact at all. So I start searching the Apple Support Web Site, to see what now, how do I proceed, well I was given a case ID so that was good, at least everything we had done will be saved in the CASE ID: 748510224
Well not so fast, it turns out that rather than try and call me back the Support Representative just up and closed my case. An email was sent to me wanting me to give them a rating of how great the service was. (NOT)
So there was no attempt to bring resolution and try to come to some satisfactory solution.
Bottom line I am stuck with the inability to Share these beautiful brand new devices two brand new iPads that I paid at close to a grand. Apparently I cannot even set Family Sharing up with these devices, well least wise not for another year.
The events over the last several days and my experience with Apple Support have given me pause regarding Apples. It’s a huge disappointment.
I still want to move to a MacBook Pro, and my wife still wants to get her iMac with Retina Display.
My singular Question: Is this how this must end? With us waiting for a whole year to get Family Sharing operational? This because I left my Family share twice on my iPad device.

That's better than the response I received. The supervisor with whom I spoke earlier today told me flat out there's nothing they can do, and I just have to wait a year.
I do hope they're looking at a solution for those of us who were just playing around with the feature to see how it works. I understand the rationale, but considering that there was no warning that the account would be locked out, that "solution" is uncharacteristic of Apple and simply unacceptable.

Dunning interest calculation - taking 360 days instead of 365 days

Dear Friends,
I have done the dunning customization and forms are generating properly including the days in arrears. But for the dunning interest calculation, it is taking only 360 days instead of 365 days. Because of this, there is a difference in interest amount in dunning (F150 tcode) and interest calculation (FINT tcode).
Please guide me how to resolve this issue.
Thanks in advance for your help.
Regards,
Dwarak.

hi
check the below configuration.
spro-
interest calculations- global settings-
prepare item interest calculation/prepare balance interest calculations.
here you select calender type : G(365 days)
chandra

My e-mail automatically deletes read e-mail in my inbox every 14 days without my permission. How do I get this to stop?

I switched e-mail clients from windows live to thunderbird in mid december to alleviate problems in sending group e-mail. I have thunderbird on a different laptop and the product works flawlessly. The client works flawlessly with one exception: It automatically deletes any read e-mail in my inbox every 14 days without any input from me. I have had ITOK & Hughes.net look at the problem as I am using my inbox as a staging area for for pending business that tracks progress of different events. I have checked settings and there are no evident features that I can switch on or off with that time frame. This has occurred 3 times since December and I have resorted to printing e-mails to prevent loss of data.
The desktop uses windows 7, IMAP for incoming mail...

Log into your account at the providers web mail page and look for any retention options that might be there. Do not put too much into what their help desk tells you. Most help desk agents are lucky to know that the ringing sound means to answer the phone.

Why spotlight is not able to perform searches on iCal events older than 365 days?

why spotlight is not able to perform searches on iCal events older than 365 days? I really do not understand why if iCal can sync all events, even the very old, the spotlight will not be able to search on events older than 365 days; why? is absurd; let's say I want to search for a person contained in an old appointment: iCal in your Mac with a few key words, I find it right away, but this important feature on the iPhone is locked; we have in our pockets phones are very sophisticated, but it does not manage to make things really trivial.

Submit your feedback directly to Apple using the appropriate link on the Feedback page:
http://www.apple.com/feedback

HT2188 I bought my iPhone 4s Nov. 20. I updated immediately to ios6.0 and cannot make it through even 1 day without the battery going down to almost zero. Thats with apps closed, wifi off, screen off, etc. It's a horror. I have to constantly keep char

I purchased an iPhone 4s on Nov. 20th. I immediately had to update the software to ios 6.0.1. I cannot even get through 1 day without the phone battery losing all power. It loses 10-20% per hour, and that's with apps closed, wifi off, bluetooth off, screen dark, updates current, etc. You can hold the phone in your hand and watch the power go down. It also gets very warm. I have to charge it once or twice a day so I have it when I need it.
I took it in to the Sprint store for diagnostics to see if there was something wrong with the phone. They said the phone is ok, but one of the agents said it's the last update - he has had problems ever since. He said he thought they are working on fixing it & we should be getting another update to fix it. Is this true? I sure hope so! They also showed me how to reboot the phone, especially when it gets so warm. Is there anything else I need to do? Please help!
This is my first iPhone and I am very frustrated and disappointed in Apple. If it's the software, I would think they would be frantically trying to fix it. This phone was not the cheapest phone, so the battery life should be better!

After some troubleshooting, I decided to order a new battery. I replaced the battery and was then able to get it to restore, however--after I restore it and it comes time to restart the phone, it gets stuck and doesn't turn on.
Sorry, your repair ruined the iPhone.
She does not have apple care and even though she loved this device, she isn't going to buy another iPhone because of all the problems shes had with this one (it's just over a year old).
After you ruined the iPhone with DIY, Apple won't touch it anymore. You should have asked before all these had happened.
I'm an android user myself and I love rooting/flashing new ROMS, so if jailbreaking her phone or doing some kind of super-restore with 3rd party programs might help, I'm all for it-
Yeah, all Android user can think of is Jailbreaking, read this: http://support.apple.com/kb/HT3743

Is it really possible to revert IPS signatures from CSM

Hi folks,
I've been trying to revert IPS signatures that I deployed through CSM Signature policies to the older release but it doesn't seem to be working. Contrary to it Cisco's CSM guide says:
If you later decide that you did not want to apply a signature update, you can revert to the
previous update level by selecting the Signatures policy on the device, clicking the View
Update Level button, and clicking Revert
I can't imagine it is possible as the signatures are normally compiled into xml files. How would the sensor do it ?
Eugene

During installation a copy of files that will be replaced or updated during the installation will be copied into a backup directory.
The CLI has a "downgrade" command that can uninstall the last update, and the backup copies will be used to replace the files being removed.
A few things to be aware of:
1) Old configuration will be copied back. So changes made since the update may be lost.
2) This works only for Engine Updates and Signature Updates. Major Updates, Minor Updates, and Service Packs replace the complete operating system so there is too much data to try and make backup copies for.
3) This works only for the last update installed. Once you've downgraded the latest one, you can't downgrade the previous one.
4) This can be done through CLI, and now also available in CSM.
Here are some things to check in your situation where it appears to not be working.
Login to the sensor and execute "show ver".
Does the history in the "show ver" output show a Signature Update package as the last update installed?
If not then either another downgrade was previously done, or a Major Update, Minor Update, or Service Pack was the last package installed and can't be downgraded.
If it can't be done through CSM you might try the CLI' "downgrade" command and see if it works through the CLI or if the CLI gives you an error and explanation.

Ever since the systyem upgraded me to 3.6.6. I can not even run one eight hour day without firefoc either crashing or locking up which requires me use C/A/Deleate to close the program. I used to be able to run 8 to 12 windows at a time and NEVER lock up

Ever since the systyem upgraded me to 3.6.6. I can not even run one eight hour day without firefoc either crashing or locking up which requires me use C/A/Deleate to close the program. I used to be able to run 8 to 12 windows at a time and NEVER lock up or crash with the older version. Is this problem being looked into and or being corrected. I use Firefox with Google and my system is XP Pro 32 bit. THIS IS REALLY making me MAD. My email is [email protected] and would appreciate a response to this ASAP. I have tried a couple of items from your help section and nothing works.

'''Anonymous'''
Please post a separate question. Thank you. https://support.mozilla.com/tiki-ask_a_question.php?locale=en-US&forumId=1
'''chris'''
'''''Crashing'''''
See:
http://support.mozilla.com/en-US/kb/Firefox+crashes
http://kb.mozillazine.org/Firefox_crashes
http://support.mozilla.com/en-US/kb/Firefox+crashes+when+loading+certain+pages
http://support.mozilla.com/en-US/kb/Firefox+crashes+when+you+open+it
http://support.mozilla.com/en-US/kb/Firefox+will+not+start
http://kb.mozillazine.org/Browser_will_not_start_up
'''''Hanging'''''
See: http://support.mozilla.com/en-US/kb/Firefox+hangs
'''''Hanging at exit'''''
'''Kill Application'''
In Task Manager, does firefox.exe show in the '''Processes''' tab?
See: [http://kb.mozillazine.org/Kill_application Kill Application]
'''Causes and solutions for Firefox hanging at exit:'''
[[Firefox hangs]]
[http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit Firefox hangs at exit]
[[Firefox is already running but is not responding]]
'''''Safe Mode'''''
You may need to use '''[[Safe Mode]]''' (click on "Safe Mode" and read) to localize the problem. Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''before''' starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
See:
'''[[Troubleshooting extensions and themes]]'''
'''[[Troubleshooting plugins]]'''
'''[[Basic Troubleshooting]]'''
If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it by enabling '''one at a time''' until the problem reappears. '''You MUST close and restart Firefox after EACH change''' via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.
'''chris'''
'''''Other Issues''''': ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
'''Update Java''': your ver. 1.6.0.~~red:17~~; current ver. 1.6.0.20 (important security update 04-15-2010)
(Firefox 3.6 and above requires Java 1.6.0.10 or higher; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
''(Windows users: Do the manual update; very easy.)''
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
Do the update with Firefox closed.
'''NOTE:''' Java version 1.6.0.21 has been released. It is mainly an update for developers of Java applications and most users do not need to be concerned about downloading version 1.6.0.21. '''''At this time''''', the update option in existing installations of Java 1.6.0.20 are not updating to version 1.6.0.21; '''''at this time''''', it must be manually downloaded and installed. According to the Java release notes:
''"'''Bug Fixes'''''
''Java SE 6 Update 21 does not contain any additional fixes for security vulnerabilities to its previous release, Java SE 6 Update 20. Users who have Java SE 6 Update 20 have the latest security fixes and do not need to upgrade to this release to be current on security fixes."'' Source: http://java.sun.com/javase/6/webnotes/6u21.html
'''Install/Update Adobe Flash Player for Firefox (aka Shockwave Flash)''': your ver. 10.0 r~~red:45~~; current ver. 10.1 r53 ('''important security update 2010-06-10'''; see: http://www.adobe.com/support/security/bulletins/apsb10-14.html)
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash Updating Flash]'''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
-exit Firefox (File > Exit)
-''In Windows,'' check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-''In Windows,'' double-click on the Adobe Flash installer you just downloaded to install/update Adobe Flash
-when the Flash installation is complete, start Firefox, and test the Flash installation here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507&sliceId=1
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version of Flash. To install/update the IE ActiveX Adobe Flash Player, same instructions as above, except use IE to download the ActiveX Flash installer. See: [[ActiveX]]
*Also see: http://kb.mozillazine.org/Flash ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]
'''Update Shockwave for Director (aka Shockwave Player)''': your ver. ~~red:10.1 (very old)~~; current ver. 11.5.7.609 (important security update released 2010-05-11; see http://www.adobe.com/support/security/bulletins/apsb10-12.html)
NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
SAVE the installer to your hard drive (Desktop is a good place so you can find it). When the download is complete, exit Firefox (File > Exit), locate and double-click in the installer you just downloaded, let the install complete.
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox#_Installing_Shockwave Installing Shockwave]'''
'''You '''~~red:'''MAY'''~~''' need to Update Adobe Reader for Firefox (aka Adobe PDF Plug-In For Firefox)''': your ver. N/A; current ver. 9.3.3 (important security update release 06-29-2010; see: http://www.adobe.com/support/security/bulletins/apsb10-15.html)
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: http://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
''You may be able to update from the Adobe Reader installed on your system'' instead of going to the Adobe site and downloading. Open the Adobe Reader installed on your system (''in Windows, Start > Program Files, find and click Adobe Reader to open''), click Help, click Check for Updates.
''If you go to the Adobe site to download the current Adobe Reader:''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
~~red:-See the images at the bottom left of this post to see the steps to take on the Adobe site~~
-exit Firefox (File > Exit)
-In Windows: check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-In Windows: double-click on the Adobe Reader installer you just downloaded to install/update Adobe Reader
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version. To install/update the IE ActiveX version, same instructions as above, except use IE to download the ActiveX installer. See: [[ActiveX]]
*Also see: http://kb.mozillazine.org/Adobe_Reader ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]

My batterie doesn't work correctly to my Iphone 5. It should work longer, but it's worse. My battery does not hold a full day without much use.

It should work longer, but it's worse. My battery does not hold a full day without much use.
When the new version of ISO6 will come ??? A lot of apps don't work correctly too.... :-(
I'm a little bit disappointed...

Sounds like your iPhone is locked to your home carrier.
See if they offer unlocking and if you qualify. Otherwise,
there is nothing you can do besides rent/but a cheap
phone for your month in Argentina.

Source inspection before 365 days of delivery date of purchase order

Hi Experts,
Business wants to create source inspection lot well in advance before 365 days of delivery date of purchase order. this lot is required to record results.
In SAP, transaction code QA51 allows only two digit characters for 'number of days for opening period' so system is not creating inspection lot for more than 99 days delivery date from current date.
Please advise.

Hi Patel, I really got interested on this particular issue because we have been using source inspection in our company for a while. After some investigation on ABAP code of report I will share with you my fact findings:
1) System calculates the start date of source inspection (delivery date from PO - Leadtime from q-info record). For example, in my test case it was 14.08.2015 - 0 days. So field g_datum below will be 14.08.2015:
2) System then checks if you are running the report in background (highlighted in yellow above). If so then it will check if the start date of inspection (g_datum) falls on opening horizon (g_datum_eroff). The opening horizon is calculated as per formula below (system login date + opening period). As an example: 14.08.2014 + 30 days = 13.09.2014.
Default opening period (p_eroff) is 30 days:
3) So all-in-all, when you are running QI07 online you´ll get a yellow traffic light on the long leadtime PO but you will be able to process it (on-line). However if you run the report in background (job scheduling) system will only create inspection lot to the relevant POs if the PO's delivery date falls on the 30 days window based upon the current date.

Validate Date if it falls within 30, 120 and 365 days of the audit date I enter on any given day

PDF Forms in Acrobat 9 Pro
When auditing a file, I enter the date I am auditing it.
Example: 02/18/2015
I then enter dates of when information was last verified. Some of these dates need to fall within 30 days of the audit date I enter on any give day and others need to fall within 120 days and another within 365 days. If they don't fall within the specified number of days for that field, I would like it to give an error message in that filled.
Examples:
College Grad Date 01/15/2015
Certification Date 12/23/2015
License Date 02/13/2014 - This is over 365 days so I do not want the date, I want it to display "Need to re-verify"
I do not have any inkling of an idea of how to write this. Your help would be most appreciated.
Thank you.

Solved the problem- I contacted apple on their support line found on this page... http://www.apple.com/uk/support/mac/ and they were really helpful and talked me through what to do on the phone, I now have all three productivity apps. Hope this helps

Carrying scheduling cosidering all 365 days are working days

when I am carryying out scheduling for a process order in which resource is assigned with 365 days as working days calender, it is displaying saturday and sunday as non working days and no operations being planned on those days. Even plant is assigned with factory calender 0f 365 working days. Can you please anybody let me know what may be the problem.

Dear,
Factory calendar is maintained in SCAL transaction and assgined in the capcity tab in resource. or Whether you have maintained the shift sequence in resource?. ie for each dates have you maintained the shift pattern with all days are working days.
Please refer thess threads for details,
Re: change the Factory calendar in work center
Re: Factory calendar in work center
Regards,
R.Brahmankar

WRVS4400N v2: IPS SIGNATURES || 365 days without an update??

Similar Messages

Maybe you are looking for