WS-ReliableMessaging using OSB WS protocol
Hi All,
We have a requirement to implement WSRM in OSB.
Our invocation pattern is
BPEL(Async)=> OSB(ASync)=>External APP(Sync)
We have chosen WS protocol and WSRM policies for both proxy and business services.
What I obseved is BS is sending WSRM payload to target application which is unwanted.
Obviously target application doesn't understand WSRM payload.BS has to discard this handshaking command and send ack to PS WSRM layer.
Anybody has worked on this WSRM in OSB?
BS is sending below payload to target application
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<env:Header xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing">
<wsa:To xmlns:wsu="http://schemas.xmlsoap.org/ws/2002/07/utility" xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing">http://soa.part.com:7201/soa-infra/services/default/Order/orderimport_client_ep</wsa:To>
<wsa:FaultTo xmlns:wsu="http://schemas.xmlsoap.org/ws/2002/07/utility" xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing">
<wsa:Address>http://schemas.xmlsoap.org/ws/2004/08/addressing/role/anonymous</wsa:Address>
</wsa:FaultTo>
<wsa:MessageID xmlns:wsu="http://schemas.xmlsoap.org/ws/2002/07/utility" xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing">uuid:AdminServer:72c210997f83a732:-3e03b3bf:134156f2f57:-64e8</wsa:MessageID>
<wsa:Action xmlns:wsu="http://schemas.xmlsoap.org/ws/2002/07/utility" xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing">http://schemas.xmlsoap.org/ws/2005/02/rm/CreateSequence</wsa:Action>
<wsa:ReplyTo xmlns:wsu="http://schemas.xmlsoap.org/ws/2002/07/utility" xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing">
<wsa:Address>http://osb.part.com:7101/alsb/ws/_async/AsyncResponseService</wsa:Address>
<wsa:ReferenceParameters xmlns:serviceidentity="http://www.bea.com/ServiceIdentity"><serviceidentity:ServiceIdentity xmlns:wsu="http://schemas.xmlsoap.org/ws/2002/07/utility" xmlns:serviceidentity="http://www.bea.com/ServiceIdentity">
<serviceidentity:ServerName>AdminServer</serviceidentity:ServerName>
<serviceidentity:ServiceName>weblogic.wsee.conversation.msg.cluster.service</serviceidentity:ServiceName>
</serviceidentity:ServiceIdentity>
</wsa:ReferenceParameters>
</wsa:ReplyTo>
</env:Header>
*<env:Body xmlns:wsrm="http://schemas.xmlsoap.org/ws/2005/02/rm">*
*<wsrm:CreateSequence>*
*<wsrm:AcksTo xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing" xmlns:wsrm="http://schemas.xmlsoap.org/ws/2005/02/rm"><wsa:Address>http://osb.part.com:7101/alsb/ws/_async/AsyncResponseService</wsa:Address>*
*<wsa:ReferenceParameters xmlns:serviceidentity="http://www.bea.com/ServiceIdentity">*
*<serviceidentity:ServiceIdentity xmlns:wsu="http://schemas.xmlsoap.org/ws/2002/07/utility">*
*<serviceidentity:ServerName>AdminServer</serviceidentity:ServerName>*
*<serviceidentity:ServiceName>weblogic.wsee.conversation.msg.cluster.service</serviceidentity:ServiceName>*
*</serviceidentity:ServiceIdentity></wsa:ReferenceParameters></wsrm:AcksTo>*
*</wsrm:CreateSequence>*
*</env:Body>*
</env:Envelope>
Regards,
Praveen
Edited by: Venkat K.V on Dec 20, 2011 4:10 AM
The 8.1 version of reliable messaging does not conform to the WS-ReliableMessaging specification, as that specification was not available at the time of 8.1 development. The next major release of WLS will contain a full WS-ReliableMessaging implementation.
Similar Messages
-
Sample Project in osb 10.3.1 describing use of sb protocol
Can anyone suggest some example handon done in osb 10.3.1 describing the use of sb protocol
Thanks in Advance!!!Edwin Biemond's blog...
http://biemond.blogspot.com.au/2009/03/calling-async-bpel-services-from-osb.html -
Extracting MIME attachment from email using OSB proxy service - email transport
Hi,
I'm reading email messages(multipart/mixed) with attachments(pdf, zip, xml and csv) from MS Exchange Server 2010 using OSB proxy service email transport.I need to save the attachments to a local folder and process one of the attachments, an XML file. Below is the proxy service config.
Proxy Service Configuration (Test1/Proxy Services/GetEmail)
Actions:
General Configuration
Service Type Messaging Service
Message Type Configuration
Request Message Type
Text
Response Message Type
None
Transport Configuration
Protocol email
Endpoint URI mailfrom:mailserver.net:143
Get All Headers No
Headers
EMAIL Transport Configuration
Email Protocol imap
Service Account Test1/Proxy Services/email_acc
Managed Server WLS_OSB1
Polling Interval 30
Read Limit 2
Pass By Reference false
Pass Attachments By Reference false
Post Read Action move
IMAP Move Folder processed
Attachments archive
Download Directory \\soasup-stor01\Vacancy\test\download
Archive Directory \\soasup-stor01\Vacancy\test\archive
Error Directory \\soasup-stor01\Vacancy\test\error
Request Encoding iso-8859-1
Message Handling Configuration
Transaction Required Disabled
Same Transaction For Response Disabled
Content Streaming Disabled
The polling is working fine. I've encoded the attachment variable to Base64 using a java callout.$attachments/ctx:attachment/ctx:body/ctx:binary-content has been passed as the byte[] input to the java method and the response is captured in $encodedAttachment. I've created a SaveFile BS(file type) with Request Message Type = Binary and Response Message Type = None. I've tried replacing the node ./ctx:binary-content in body variable with encodedAttachment in the request action of the Publish action to call the BS. One file is getting created with contents of the entire email, MIME headers and boundary parts along with the base64 encoded attachments.
<Contents from the created file>
MIME-Version: 1.0
Content-Type: multipart/related; boundary=MIME_Boundary;
type="binary/octet-stream"
--MIME_Boundary
Content-Type: binary/octet-stream
Content-Transfer-Encoding: 8bit
Thanks & Regards,
Samyajit Talukdar
: [email protected]
-----Original Message-----
From: Samyajit Talukdar
Sent: 10 April 2015 14:11
To: MS MLRP Returns
Subject: FW: 22222
Thanks & Regards,
Samyajit Talukdar
: [email protected]
--MIME_Boundary
Content-Type: application/vnd.ms-excel; name="soainfra_v$session.xls"
Content-Transfer-Encoding: base64
Content-Description: soainfra_v$session.xls
Content-Disposition: attachment; filename="soainfra_v$session.xls";
size=25618; creation-date="Thu, 27 Nov 2014 09:56:35 GMT";
modification-date="Fri, 10 Apr 2015 09:28:23 GMT"
0M8R4KGxGuEAAAAAAAAAAAAAAAAAAAAAPgADAP7/CQAGAAAAAAAAAAAAAAABAAAAAQAAAAAAAAAA
EAAAJgAAAAEAAAD+////AAAAAAAAAAD/////////////////////////////////////////////
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAA=
--MIME_Boundary--
If I put a delete action in the request to Publish action for SaveFile BS to delete the $attachments, the created file contains only the email body part and the attachment boundary part is missing.
I've uploaded the OSB log with full trace enabled.
How can I pass the encodedAttachment to the BS for saving the files?
Would iterating through the $aatachment/ctx:attachment give me the individual attachments for saving and processing, as there are separate binary-content refs in them?
Any help to achieve my requirement is highly appreciated.
Thanks in advance.Hi Manoj,
Thanks for the quick reply to my query.
The thing is, the link you have provided talks more from changing the business Service configurations i.e. the type of the service etc, but the concern is, that the Business Service is already Implemented and hence the change would not be an appropriate option for me.
Please let me know, if any more information is required.
Thanks & Regards,
Anu -
Send HTML email using OSB email transport
Hi all
The client we are working for has a specific email template (HTML based) in which emails need to be send. I have tried using the HTML tags to frame this email string, but when I open the email in outlook, I can see the tags as it is. Tags like <p> <br> are not recognised as HTML rather taken as normal strings.
Pls help in framing an HTML based email message using OSB. ThanksHi Anuj
Thanks again! You are a life savior. Actually i did check the blog, but the author was modifying http headers in the blog using $outbound variable directly using xpath. So, i just wanted to clarify, if using transport headers for outbound request for email protocol would do the job.
I will check and post back the results. I am currently struggling with OSB and Log4j java callout. I am getting weird logs from OSB server in my interface specific log. -
How to download a file from Oracle UCM using OSB
Hi,
How can I download a file from Oracle UCM and save it on a filesystem using OSB 11.1.1.5.
ThanksUCM supplies webservice interfaces which let you retrieve the filecontent by soap calls from UCM (http://ucmhost/_dav/cs/idcplg for example). (maybe you should enable some settings on ucm to have this webservice interface getting published).
This services for example has 2 operations getFileByID and getFileByName.
So you can just call these services from within OSB.
After that you need to do some tests if you eitherway need to create a file-transport business-service and call this one from your proxy service or create a messageType proxyservice (binary) which calls this file-transport business service to be able to write fo filesystem.
I think for the OSB book i used a jca file adapter generated in Jdeveloper and used that one to write to filesystem. -
I would like to know how i can share my music using an UPnp protocole. I have an Imac but when i'm chosing the option share my file i can connect my mac to another network reader . it seems that the protocole used is not UPnp. I need this to be in UPnp. does somebody can help ?
Google "upnp mac"
-
Error encountered while polling a file using OSB
Hi,
This is the Exception when i try to poll a file using OSB
<Error enco
untered while polling the resource for the service endpoint ProxyService$CASE_RC
$BUILD_DATA$FILE_HEADER$FileProcessPS: javax.naming.NameNotFoundExc
eption: While trying to lookup 'wlsb.internal.transport.task.queue.file' didn't
find subcontext 'wlsb'. Resolved ''; remaining name 'wlsb/internal/transport/task/queue/file'
javax.naming.NameNotFoundException: While trying to lookup 'wlsb.internal.transp
ort.task.queue.file' didn't find subcontext 'wlsb'. Resolved ''; remaining name
'wlsb/internal/transport/task/queue/file'
at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(Basic
NamingNode.java:1139)
at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:247)
at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:182)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:254)
Truncated. see log file for complete stacktrace
Can i know what is the issue?Hi,
* java.lang.OutOfMemoryError: PermGen space
at java.lang.Class.getDeclaredConstructors0(Native Method)
at java.lang.Class.privateGetDeclaredConstructors(Unknown Source)
at java.lang.Class.getConstructor0(Unknown Source)
at java.lang.Class.getConstructor(Unknown Source)
Solution: Increase the max permgen space -XX:MaxPermSize=256m
There can be a leak in the permgen objects. If tuning parameters do not resolve the issue, we need to use the memory leak detector tools and find out which instances in the permgen space are not getting cleared.
Reference - Weblogic wonders...
http://weblogic-wonders.com/weblogic/2010/12/30/different-out-of-memory-issues/
Cheers,
Vlad -
How to Ftp a Blob attachment in a table using osb service
How to Ftp a Blob attachment in a table using osb service
I tried with DBadapter select it does not work ... For blob objects cant use select throws error as expected number got blob
can call a stored procedure to write the file to some directory but that file will not be created with the same name of the file as stored in DB .. need to hard code the filename in utl file or if we pass a variable to get the name of the attachment file we have to use select query in cursor which throws error like above in step 2
Can some body tell me how to get the blob attachment with the same name as it is stored in DB table
Edited by: user13745573 on Jan 31, 2011 4:35 AMHi,
I want to send an attachment through email.
But I want to pick the file from say local drive then how can i specify the path of the file in file name.
Also, i dont want ot append the conent from payload to the file. i wanted to sendthe file as is.
<ema:attachment>
<ema:name></ema:name>
<ema:type>text/plain</ema:type>
<ema:content/>
</ema:attachment>
Please help. -
Is it possible to send a text message using the UDP protocol?
Support doc
http://www.adobe.com/support/director/multiuser/using_udp/using_udp02.html
says to use the following format with connectToNetServer:
errCode =
gMultiuserInstance.connectToNetServer([#remoteAddress:
"chatServer.myCompany.com", #logonInfo: [#userID: "Bob",
#password:
"MySecret", #movieID: "Tech Chat"], #mode: #smus,
#localUDPPort: 1627,
#localAddress: "123.45.67.89", #remoteTCPPort: 1626])
But if I change the mode to #text, it still sends out
messages as smus.
In fact, if I leave out the UDP parameters altogether but
still use the
list parameters for connectToNetServer, it still always sends
as smus.
Sends as smus:
errCode =
gMultiuserInstance.connectToNetServer([#remoteAddress:
"chatServer.myCompany.com", #logonInfo: [#userID: "Bob",
#password:
"MySecret", #movieID: "Tech Chat"], #mode: #text,
#localUDPPort: 1627,
#localAddress: "123.45.67.89", #remoteTCPPort: 1626])
Sends as smus:
errCode =
gMultiuserInstance.connectToNetServer([#remoteAddress:
"chatServer.myCompany.com", #logonInfo: [#userID: "Bob",
#password:
"MySecret", #movieID: "Tech Chat"], #mode: #text])
Only the string parameter method can be made to send text
messages.
Sends as text:
errCode = gMultiuserInstance.connectToNetServer("Bob",
"MySecret",
"chatServer.myCompany.com", 1626, "Tech Chat", 1)
Am I missing something? Is this a known issue? Anyone have a
work around?
-JeremyDrat!
Thanks for the answer though.
alchemist wrote:
> The multiuserXtra supports either tcp text or tcp smus
connections.
> The ability to send udp messages was an expansion to the
original mus
> protocol/xtra and is valid only for muXtra instances
already connected in
> smus mode.
> So, if you are asking if you can create a udp instance
and use it at will
> (exchange udp messages with some remote udp socket),
then the answer is no.
>
>
> "Jeremy Aker" <[email protected]> wrote in message
> news:[email protected]...
>> I'm really sorry that I wasn't clear enough. I'll
repeat the questions
>> more concisely.
>> Is it possible to send a text message using the UDP
protocol? If so, how?
>> Is the bug I described in my original message (see
below) really a bug or
>> am I doing something wrong?
>> If it's a bug, does anyone have a work around?
>>
>> alchemist wrote:
>>> And the question is?
>>>
>>> "Jeremy Aker" <[email protected]> wrote in
message
>>> news:[email protected]...
>>>> Support doc
>>>>
http://www.adobe.com/support/director/multiuser/using_udp/using_udp02.html
>>>> says to use the following format with
connectToNetServer:
>>>> errCode =
gMultiuserInstance.connectToNetServer([#remoteAddress:
>>>> "chatServer.myCompany.com", #logonInfo:
[#userID: "Bob", #password:
>>>> "MySecret", #movieID: "Tech Chat"], #mode:
#smus, #localUDPPort: 1627,
>>>> #localAddress: "123.45.67.89",
#remoteTCPPort: 1626])
>>>>
>>>> But if I change the mode to #text, it still
sends out messages as smus.
>>>> In fact, if I leave out the UDP parameters
altogether but still use the
>>>> list parameters for connectToNetServer, it
still always sends as smus.
>>>>
>>>> Sends as smus:
>>>> errCode =
gMultiuserInstance.connectToNetServer([#remoteAddress:
>>>> "chatServer.myCompany.com", #logonInfo:
[#userID: "Bob", #password:
>>>> "MySecret", #movieID: "Tech Chat"], #mode:
#text, #localUDPPort: 1627,
>>>> #localAddress: "123.45.67.89",
#remoteTCPPort: 1626])
>>>>
>>>> Sends as smus:
>>>> errCode =
gMultiuserInstance.connectToNetServer([#remoteAddress:
>>>> "chatServer.myCompany.com", #logonInfo:
[#userID: "Bob", #password:
>>>> "MySecret", #movieID: "Tech Chat"], #mode:
#text])
>>>>
>>>> Only the string parameter method can be made
to send text messages.
>>>> Sends as text:
>>>> errCode =
gMultiuserInstance.connectToNetServer("Bob", "MySecret",
>>>> "chatServer.myCompany.com", 1626, "Tech
Chat", 1)
>>>>
>>>> Am I missing something? Is this a known
issue? Anyone have a work
>>>> around?
>>>>
>>>> -Jeremy
> -
How to determine mime-type of a file using OSB
I was working on a requirement where in it requires to use FILE/ FTP adapters using OSB or BPEL as solution. The idea is to pick up files from one location to another location for certain legacy platforms. The real issue is, someone can put a JPEG file in the upload/download location(s), merely by changing the extensions. When this happens the systems will not process since the mime-type is incorrect.
I know of an open-source API (Apache-Tikka) to determine the mime-types, but then if we use open-source why would customer buy from us.
The intention is to pick-up the file and simply pass-it (and not parse) on to next system using File or FTP adapter, but in the process, cross check the MIME-TYPE before doing so.
Any solution using Oracle Service Bus or BPEL would helpHI Birender,
Kindly go through the metalink doc for processsing jpeg/xml/pdf etc any atachement using bpel :Understanding XPATH functions for processing MIME attachments with BPEL PM in SOA Suite 11gR1 [ID 1272093.1]
Regrds,
olety -
Is it possible to use an IrDA protocol with LabVIEW 8.2.1 in DSP BlackFin?
Dears,
I'm building a project to communicate a DSP BlackFin 533 with a Palm E2 Tungsten between IrDA Protocol. The packaged LabVIEW installed in Palm allows to use IrDA protocol, but I don't know if the packaged for BlackFin DSP allows or not.
Is it possible to use an IrDA protocol with LabVIEW 8.2.1 in DSP BlackFin?
Regards,
Renato - RPSOpPss ...
Sorry !!!
Attachments:
IrSerial.zip 11 KB
IrSerial1.zip 11 KB -
Unable to connect to the Exchange server using HTTP/HTTPS protocol.
hi,
i try to connect microsoft exchange server, but it give me
error
Unable to connect to the Exchange server using HTTP/HTTPS
protocol.
my code is pasted below............
<!--- connection parameters --->
<cfparam name="user1" default="uHRH">
<cfparam name="user2" default="uHRH">
<cfparam name="password" default="uHRH">
<cfparam name="exchangeServerIP" default="192.168.0.1">
<cftry>
<!--- Open a connection to the exchange server by
specifying the required user credentials --->
<cfexchangeConnection
action="open"
username ="#user1#"
password="#password#"
server="#exchangeServerIP#"
<!--- protocol = "http"--->
connection="conn1">
<cfoutput>Connection to exchange server
"#exchangeServerIP#" established</cfoutput>
<!--- Close connection to exchange server --->
<CFExchangeConnection
action="close"
connection="conn1">
<cfoutput>Connection to exchange server
"#exchangeServerIP#" terminated</cfoutput>
<!--- Error Information --->
<cfcatch type="any">
<cfoutput>#cfcatch.message#</cfoutput>
</cfcatch>
</cftry>
if any one know how to solve this error?Hi,
The "<cfexchangeConnection>" tag supports both "HTTP"
and "HTTPS" connection.. So Please make sure the username has the
"Outlook Web Access".
Also try removing the <!--- protocol = "http"--->
comment which you placed inside the "<cfexchangeConnection>"
tag. -
Using OSB 64bit to backup Oracle 32bit is possible?
Hi all,
I'm trying to backup database to tape using OSB.
Oracle Database Version: Oracle10gR2 10.2.0.3.0 Standard Edition 32bit
Oracle Secure Backup Version: 10.4.2.0 64bit
S.O.: Windows 2008 R2 Standard 64bit
But I'm getting the following error:
RMAN> run
2> {
3> allocate channel c1 type sbt;
4> backup database;
5> }
using target database control file instead of recovery catalog
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of allocate command on c1 channel at 05/15/2013 15:35:36
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27211: Failed to load Media Management Library
Could anybody help with this issue?
I think this happens because OSB architecture is 64bit while RDBMS architecture is 32bit. Can you confirm for me?
Thanks in advance.Adding trace information:
RMAN> 2> 3> 4> 5>
using target database control file instead of recovery catalog
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of allocate command on c1 channel at 05/15/2013 15:48:14
RMAN-10035: exception raised in RPC:
ORA-19624: operation failed, retry possible
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27211: Failed to load Media Management Library
ORA-06512: at "SYS.DBMS_BACKUP_RESTORE", line 170
RMAN-10031: RPC Error: ORA-19624 occurred during call to DBMS_BACKUP_RESTORE.DEVICEALLOCATE -
Using OSB for Public API (REST)
Hi there,
Is it a good practice to use Oracle Service Bus to expose a PUBLIC REST API?
The idea is to have a separeted OSB instance which will be in the WEB so that other partners and applications (Native Mobile, for instance) can access some of our services. The application layer will have many different applications, like SAP, JEE systems, Cobol and others. But the public API will be design in a more RESTful fashion.
What about security?
What about performance? (Parsing JMS, XML and others into JSON will probably create extra load into the OSB).
What are be the advantages of using OSB instead of a more traditional Service Layer?
P.S.: We are being careful with the design of our API, sometimes the underlying system doesn't help, so some transformation has to happen (more load!) in order to make the API elegant and meaningful.
CheersPersonally, I'd prefer Collections as they are nice to work with. Their only annoying issue is certainly the constant casting as soon as you retrieve Objects from them.
I do not consider the documentation of what those Collection include too big a problem. Just include a line for each Collection parameter stating "Set of Strings" or the like. I wouldn't even check the type through instanceof, I'd just cast. If a ClassCastException is thrown, I think that's the proper thing to do.
As you might have noticed, there is a proposal of "Generics" for Java, which would adopt something like those template classes known in C++. There is even a beta implementation available, so you can go ahead and code your Set<String>. Time will tell if this proposal finds its way into the official Java standard, the drawback being a more complex syntax. If you want to know more about it, check out those links:
http://forum.java.sun.com/forum.jsp?forum=316
http://www.jcp.org/jsr/detail/14.jsp
http://developer.java.sun.com/developer/earlyAccess/adding_generics -
JMS Biz & Proxy Services Using OSB & SSL
We have a potential requirement being enforced upon us which states that our communication to another system using a JMS proxy service should be using SSL.
Has anyone done this before using OSB?
There is a "Use SSL" tick box on the proxy and business services, but I think this is purely for authentication and not transport - but I could be wrong as its not an area I know that much about.
We're pushing for an IPSEC VPN link as that makes much more sense, but in the meantime I thought I'd ask if anyone had done any JMS + SSL work using OSB.
Thanks,
PeteManoj, Thanks for your reply.
Actually the other system is OSB!!
It's a government system we're talking to but in the interests of open-ness, we cannot use OSB->OSB out of the box interfaces such as SAF etc, as that isn't an open enough interface and users of the interface who don't have OSB may be disadvantaged! Something like that anyway! SAF would be a perfect option for this interface, but .....
What we've been so far is that all communication via JMS must be SSL based. But - t3s is not supported on this interface, so the SSL negotiation must be handled by a hardware device or something else.
We think we've found BigIP load balancers do the job, but that's a large cost as we don't have those in our current infrastructure.
We don't have much SSL communication apart from https, so I don't have a whole lot of experience with it and I just wondered if there was any OSB feature I'm missing, or something you can do in plan java code to get JMS communicating via SSL.
Pete
ps:A standard IPSEC VPN would do the job too, which we're going to try to push for, then, you just use the jms:// url to an address and the security is via the VPN.
Maybe you are looking for
-
How can I find a list of recent purchases with my Apple ID?
My wife and I both use the same Apple ID to access the iTunes store and App Store across a bunch of devices (Apple TV, iPhones, iPad, my Mac). It seems that charges are consolidated so that they appear on my credit card in chunks (like, if I buy an
-
Replace the Glossy Screen with the Matte Screen on a 2008 Macbook Pro?
Can you replace the Glossy Screen with the Matte Screen on a 2008 Macbook Pro? Where would I get a Matte Screen for a reasonable price if I could change it?
-
Why don't I have the invite icon on the bottom right of my calendar screen and how do I get it? Why wouldn't my 4S have this? But iPhone 4 users do? It is already turned on in my settings but that icon is missing in my calendar.
-
Component Wizard - Command Line?
I have content server installed on a linux OS (and I've run into this same situation when installed on Solaris). I generally ssh in and do my component development. What I need is a command line way of invoking the component wizard build process. All
-
Exception occurred processing JSP page
I'm a Java newbie... I'm trying to write a very simple (I think) .jsp file to test the connectivity to our Oracle DB. here's my entire .jsp file... <%@ page import="java.io.*"%> <%@ page import="java.sql.*"%> <%@ page import="javax.sql.*"%> <% String