WSAD: Evaluating JSP includes in JSP Preview

Hello. I am a newbie to WSAD 5.0 and am trying to figure out how to get it to Evaluate JSP includes when I select to preview the JSP. Right now it does not evaluate the include and just leaves that tag in the generated HTML code.
Thanks,
->Dave

The preview mode doesn't evaluate the includes as it's not running the full jsp engine.
To get what you want, right click on your jsp in the navigator view and select "Run on server".
That will open a browser window and show your jsp in all it's magnificence.
Regards,

Similar Messages

JSP Preview Mode in JDeveloper 10g

Is there a way to see a JSP page in preview mode within JDeveloper? Eclipse provides a plugin but I don't see that in JDeveloper, I can see the JSP page in design mode but not in preview mode. Isn't there a way Jdeveloper can preview the jsp page using some inbuild web server or using Jboss etc.

You can just press run and you'll see the page in a browser window :-)

Please help ... evaluating jsp:expression in attributes

Dear All,
I have searched the forum and found a few posts expressing a similar problem. However none seemed to divulge any solution.
<option value="<jsp:expression> signals[count] </jsp:expression>"><jsp:expression> signals[count] </jsp:expression></option>In the code above the second expression evaluates fine but the first causes problems. Its the angle brackets of the jsp:expression:
The value of attribute "value" must not contain the '<' characterI have also tried <%= %> and %= % as has been suggested in previous posts
<%= => fails also because of the angle brackets
%= % is set to the value, instead of the evaluated expression.
Am Completely Stumped. Surely there must be a way to do this!?!
Thanks is advance

Hi Steve, thanks for your help I have resolved the problem. Somewhere in the J2EE Tutorial I found a snippet of code that talked about using CDATA tags.
My working code now looks like this:
<td><select name="signal_list" multiple="multiple">
    <jsp:useBean id="signalslist" class="acreweb.SignalsList" scope="session" />
        <jsp:scriptlet>
            int count = 0;
            System.out.println("useBean");
            String[] signals = signalslist.getSignals();
            while(count < signals.length)
     //Display signal names in select box
     System.out.println(signals[count]);
     </jsp:scriptlet>
          <![CDATA[<option value=']]><jsp:expression>new String(signals[count])</jsp:expression><![CDATA[' />]]><jsp:expression> signals[count] </jsp:expression>
     <jsp:scriptlet>
     count++;
           </jsp:scriptlet>
    </select>
</td>Sorry about formatting am being dragged to the pub, impatient work colleagues

NW DS - jsp preview

I'm using NW Developer Studio 2.0.6. When I'm creating a jsp file, I'd like to have possibility of preview of this jsp. Is there some view, which can accomplish this requirement?
Thanks.
Kind regards,
Josef Motl

Hi,
You can automate the preview process by publishing it to local portal client. You can install portal irj locally and publish it an check it before publishing it to Enterprise portal.
Hope this helps
arun

Is XI included in Netweaver Preview 2004s

Hi all,
I would like to know is XI also included in Netweaver 2004s(ABAP Preview edition).
Thanks in advance.
Suresh

yes I agree with Rich
I also think the preview edition just exists of the SAP Web AS (which since 6.40 contains the BW component)
Regards
Juergen

JSP compiler Error

Hi,
we are running a EP 7.0 on SP 13. I have copied the standard theme, and now I am trying to customize it. But if I click on the "Navigation Panel" Link I get the following:
Portal Runtime Error
An exception occurred while processing your request
Exception id: 03:54_15/11/07_0013_926913750
See the details for the exception ID in the log file.
No I had a look in j2ee/cluster/server/0/log/systeme/server.log:
Version: 1.5
Guid: 00144F2A247C006A0000002900002CB300043EF89D0DF800
Time: 2007 11 15 15:36:54:592
SourceName: /System/Server
Application: sap.com/irj
Location: com.sap.portal.prt.runtime.servlet_jsp
User: Administrator
Session: 337
Transaction:
DSRComponent: P01AS1_P01_926913750
DSRUser: Administrator
DSRTransaction: 18ac4290938811dcb5f300144f2a247c
ThreadName: SAPEngine_Application_Thread[impl:3]_14
GroupId:
GroupLevel: 0
GroupIndent: 0
Severity: Error
Relatives: /System/Server
MsgType: Plain
MsgCode:
ResourceBundle:
Text: >>> JSPCompiler >>> ERROR in Compiling :JSPFileInfo :1525783928
JSP File : /NWDI/P01/usr_sap/P01/JC92/j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/portal/portalapps/com.sap.portal.ur.preview/jsp/previews/prtl/tln.jsp
Class Name: sapportalsjsptln
Java File : /NWDI/P01/usr_sap/P01/JC92/j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/portal/portalapps/com.sap.portal.ur.preview/work/jsp/previews/prtl/_sapportalsjsp_tln.java
Package Name : jsp.previews.prtl
Class File : /NWDI/P01/usr_sap/P01/JC92/j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/portal/portalapps/com.sap.portal.ur.preview/work/jsp/previews/prtl/_sapportalsjsp_tln.class
Is out dated : false [email protected]e35d7
My problem is that I can not find the reason for this. OK I have an error with the JSP Compiler, but where can I find what error I have?

Hi!
I found the reason in another trace file. The problem was no less memory.
After we fixed this problem. Everything worked again.
Best,
Stephan

Including jspx page into Panel Tabbed !!

Hi all,
Jdeveloper 11g is really powerful ..
I want to create windows explorer interface which consists of two main areas:
First one represented as a tree and the second to show the details of the selected item in the tree. I want the detail area to be as tabbed so that multiple tabs can be seen at a time, I developed most of this issue.
Here is my question:
How to include a jspx page into one of the tabs (showDetailItem) created in the panel tabbed, I've tried <jsp:include> but it didn't work
Regards,
Bassam

not sure what you mean by Panel Tabbed, but you should be able to do something like the following so that when user clicks on a tab, the proper page will load:
<af:showOneTab binding="#{backing_bean.showOneTab1}"
id="showOneTab1" position="above">
<af:showDetailItem text="Tab Text"
binding="#{backing_bean.showDetailItem1}"
id="id"
disclosed="#{some evaluation}">

<f:subview id="positionHeader">
<jsp:include page="/Header.jspx"/>
</f:subview>
</af:showDetailItem>
</af:showOneTab>
the included jsp will need to be stripped of at least the <f:view> tag since it's being included in another page that will already have the <f:view> tag. Can't remember if there are other tags <afh:html>, <afh:body> which might need to be removed from the included jsp.

AE CS4 - why such poor RAM preview on my FAST machine?

Hi all, I just installed After Effects CS4 - I have a smokin fast mchine: quadcore Zeon 3.20 GHz, hyperthreading turned on, nvidia quadrofx 3800 with current driver, 12 GB DDR3 RAM, windows 7 64bit ... can you PLEASE help me troubleshoot a problem: even on the simplest compositions, a moving picture or a moving piece of type, the RAM preview stutters along, the current time indicator hops along at a choppy pace, images in the frame dont look like they're moving smoothly, and all i get is about 6 seconds of RAM preview ... seems to me that I used to get better performance on a MUCH MUCH slower machine under windows XP ... i have looked around the forums and seem the advice on multiprocessor options and the like, but nothing I do seems to help ... do any of you have any advice for me to improve my performance??? if you have any questions about my setup or preferences, let me know, I will be on this until I get what I expect out of my (otherwise incredibly fast) machine

Hi Todd, thanks again for your reply ... FYI, I bought the FX3800 for Avid editing, for which it is the qualified video card, and supports distributed processing in the Avid along with my DX HD hardware BOB - I had hoped it would work well with After Effects, too, but I do understand the Adobe is very transparent about the fact that, as long as your card has OpenGL support, probably best to sink your $$$ into more RAM or faster CPU .. but to stay on topic, I am just very stunned that I am not getting better playback with my system ... I have the most recent Nvidia drivers ... I have 2 NEC 2490WUXi2 each connected through DVI-D to my video card, each runnign at its native 1920x1200 res, 59 hertz ... the programs I have installed are Adobe CS4 Production Premium, Win7 64bit, MS Office 2007 Enterprise, latest version of Quick Time, Media Player version 11, and NERO 9 ... you dont think that one of these video player apps (like media player or QT) are messing with my screen performance do you? what about Nero 9, have you heard any compatibility or display problems associated with this app? would unistalling any of these programs be a troubleshooting technique that you'd attempt?
Finally, when you say "an issue with a bottleneck of drawing to the screen" what do you mean exactly? 'cause this kinds sounds like a goood description of what I am seeing ... what might be the cause of such a bottleneck, I am willing to try anything ...
Thanks, sir, for your reply!
Derek Reid
Trader Multimedia Inc.
www.tradermm.com
Date: Tue, 30 Mar 2010 21:46:43 -0600
From: [email protected]
To: [email protected]
Subject: AE CS4 - why such poor RAM preview on my FAST machine?
Just one thing to cut down a frequent misconception:
Your nice graphics card doesn't do much for After Effects performance.In fact, trying to use OpenGL for rendering (including rendering of previews) can cause problems.
I recommend turning OpenGL rendering off for all but interactions. I.e., choose the http://help.adobe.com/en_US/AfterEffects/9.0/WSAF696587-2D81-42e2-B248-4C5C2B7D3614a.html and turn off http://help.adobe.com/en_US/AfterEffects/9.0/WS3878526689cb91655866c1103a4f2dff7-79e8a.htm l. OpenGL is not compatible with Render Multiple Frames Simultaneously multiprocessing.
I'm not saying that OpenGL is your problem. Rather, because you mentioned your nice graphics card, I just had to stress that you need to forget about that with regard to After Effects. It's not really relevant.
It may be that the jerkiness is an issue with a bottleneck of drawing to the screen. (I don't know, but it's possible.)
Your hard disk being too slow wouldn't be an issue with RAM previews, since the frames are all cached in RAM.
>

Lack of a print preview button on the toolbar

Like several users, I miss the availability of a Print Preview button on the toolbar. The reason: Many, many, many web sites configure their web page outputs so that they ignore the size and limitations of the user's printer. For instance, a web page will ignore the page size defined by the user and will just send out data without any regard to what the user can and will be able to print. This results in print lines that are truncated; lines that are wrapped for one word or so; or other types of output that are, at best, difficult to read and interpret. I have tried to load several add-ons which include a Print Preview button, but receive a message that because I have the most up-to-date version of Firefox (5.0.1), I CANNOT USE THEM. HELP!!!!!
Second issue: Size of the icons on the toolbars. I understand that this size is chosen to be the best for the AVERAGE user. But I find that I dislike having to place my nose on the screen in order to discern what icon I'm hovering over (Yes I'm an older individual, wear glasses and am somewhat near-sighted). It would be beneficial if the choice of toolbar icon size was larger than the default as well as the only current choice of smaller than the default.

Is there not a 'Print Preview' and 'Print' command from the '''File''' menu?
You can add an icon for Print commands by right clicking on one of the menu bars, select customize then drag and drop the icon where you want it.

Approval preview process controlled workflow

Hi,
We are using process controlled workflow (N step) for the shopping cart workflows.
While sending the reminder mails to the approvers, we would like to include the approval preview in the email.
In application controlled workflows we could use FM BBP_WFL_DIN_APPR_CONTAINER_GET to get the approval preview details.
Is there a similar function module to pick the approvers/approval status/step name etc for the process controlled workflows so that we can simulate the approval preview?
Thanks
BR
Swetha

Use class /SAPSRM/CL_WF_APV_FACADE. This is used by standard SAP WF Analysis.
Methods - RETRIEVE_PROCESS_HISTORY, GET_CURRENT_PROCESS_STATE, CREATE_PROCESS_FORECAST.
To analyze more, check the program /SAPSRM/WF_CFG_ANALYSIS_002. Check lines 209...216 (These Lines pull Previous Approved Steps, Current Process Step & Gets the approval forecast). However the REJECTED Items (Accept Decision) work little different (which is not captured by this report).
To Identify the current approval process awaiting decision by the requester of the cart, use method GET_CURRENT_PROCESS_STATE, return parameter structure /SAPSRM/S_WF_PROCESS-PROCESS_LEVEL_LIST-DECISIONSET_LIST-ITEM_STATUS_LIST gets you the current status of the item (ACCEPTED, REJECTED, OPEN, INQUIRED). If ITEM_STATUS_LIST-ITEM_STATUS EQ 'REJECTED', then the WF is waiting for acceptance/resubmission from the requester.
To your specific need, pass DOCUMENT_GUID to the class /SAPSRM/CL_WF_APV_FACADE=>GET_CURRENT_PROCESS_STATE get the return parameter /SAPSRM/S_WF_PROCESS. It will give you PROCESS_LEVEL_LIST. Then loop through DECISIONSET_LIST. It contains Table Types of AGENTS_LIST, ITEM_STATUS_LIST, WORKITEM_LIST. At /SAPSRM/S_WF_PROCESS level, you can get all the details of the current process level details
Thanks,
SC

I'm trying to install the Windows Phone 8.1 Preview for Developers but it won't install. I get x80188308. (I've tried 5 times)

I want to install a windows phone app I've created via AppStudio, and apparently a prerequisite is to install the Preview for Developers. However, it won't install. I get 0x80188308. (I've tried 5 times)
My Phone info:
NOKIA Lumia 920
OS version 8.10.12400.899
Lumia Cyan
RM-820_nam_canada_200, core build 3051.50009.1424.10362

For help using Windows Phone (including installing the preview) please post in the Windows Phone forums on http://answers.Microsoft.com

Is it possible to exclude thumbnails and previews from a vault?

I think in Aperture 1.5, vaults did not include any preview or thumbnail files, but only the files containing metadata, adjustments etc. (and the masters, unless referenced only)
Somewhere along the way to 3.0 this changed so now previews and thumbnails are backed up each time you update your vault.
This has two BIG drawbacks:
- the vault becomes much larger than necessary (I always generate large previews)
- the update process takes much longer as more files need to be copied.
On the other hand, I do not see any tangible benefit of including the extra files - provided I back up both masters and the adjustments, I should be able to regenerate thumbnails and previews after a restore following, say, a fatal hard drive error.
(If I chose to delete all previews and thumbnails prior to creating a vault, I assume that the vault would be significantly smaller, without losing any information that cannot be recreated by 'generate thumbnail/preview')
Is my understanding correct?
If so, is there a way around it?
If not, can we please have this option in Aperture 3.5 or 4.0?
Thank you!

Hi Matt. You raise an interesting point. What you say makes sense to me.
My general response is: external drives are cheap. Buy what you need and don't spend any time trying to "save" disk space. IME, the administrative overhead is far more costly than the upfront equipment costs.
Here are some specific answers (as I understand how Apeture uses Vaults).
There is no way to exclude Previews from Vaults. Each Vault includes all extant Previews.
Each Vault is a differential back-up. Updating the Vault should update only those files that have been added, changed, or deleted. Unchanged files -- including Previews -- are not backed up anew each time you update a Vault. The amount of time it takes to update a Vault will vary based on the number of changes made, and should have nothing to do with the size of the Library or the number of files in it.
You can test your hypothesis. Delete all your Previews, and create a new Vault. Let us know what you find out.
Suggestions for enhancements should be made directly to Apple via "Aperture→Provide Aperture Feedback". The forum is -- officially -- strictly for user-to-user interaction.

Preview won't display certain pdf files

I have Preview 3.0.9 (409) on Mac OS 10.4.11.
I have never had any problems opening pdf files with Preview before, but I have come accross a couple recently that wouldn't work. One opened with just a blank white page while another said: File error. Couldn't open the file.
I tried both pdf files on my iBook with the same problems. However, I then tried them on my new ipod touch and both worked fine (with text and graphics as you'd expect, nothing out of the ordinary).
These are reputable business files so there is no reason why they shouldn't work.
Why won't they open on Preview in OS X?
How can I open them??
Many thanks for all replies.

Certain parts of OS X including Mail and Preview are not upgradeable.
To extend the useful life of Tiger 10.4 and open modern PDF files, you may be interested in downloading Adobe Acrobat Reader 9.4.0, then downloading and installing the current update to 9.5.0 which was released January 10, 2012. If you need Intel versions instead click here for 9.4.0 and then update with the Intel 9.5.0 update.
The 9.5.0 update is only incremental and you MUST install the 9.4.0 version before you can update to 9.5.0! In the future Adobe Updater will automatically notify you of further updates that may become available. However, keep in mind that support will eventually drop for this 7-year-old platform.

Preview Problem for DSC 2.0 files in CS4

I'm having problems getting a preview for a file created in Adbobe PSCS4. The file is a Multi-channel using spot colors. The file was created new by going from a blank RGB straight to Multi-channels and spot colors assigned to each channel with an additional 4th channel. File was saved including 8 bit preview and a single file with color composite. When placed into Illustrator CS4 I get a solid black area. When imported to Windows Illustrator CS3 the preview is soon as expected.
Also there are problems printing DSC 2.0 placed files for color separations. In windows cs3 I have to copy the DSC 2.0 to a new document in order to do color separations using PowerRIP ImageSet as the print driver. I don't do color seps on Mac with CS4 since I only have a windows license at this time for the RIP.

After further testing I've found out what the reason is for the black rending in CS4 Illustrator.
When rending DSC 2.0 within Illustrator CS4 for a preview, it doesn't calculate the opacity of each channel. I use the first channel to render my substrate color, my original file had a pure black for my substrate. Then I calculate the opacity of Inks being used on the other channels. This is a major bug for me. I have no idea what Illustrator will do if my first channel in the DCS 2.0 is something other than Black, I haven't tried yet.

Preview/Adobe PDF password protection issue

I have a pdf file that is password protected to be able to view the content. The protection works as it should in Adobe Reader. However, when I open the file in Preview I can see the first page, but the rest are unviewable. The page thumbnail on the right is just a placeholder, not an actual thumbnail and when you navigate to those pages the actual page appears as a ? in a box.
Any suggestions as to what is going on or how to make this work properly?

Just to register that it seems to be really a problem with Preview. I had a similar problem too. I had a secure PDF (no doc assembly, no page extraction, no commenting, no filling form, no signing, no creation of template pages) and it opens as expected in Acrobat Reader 9, but in Preview, all pages ate blank, and the thumbs are absent, with only the first page being seen as a blank one. I tried to open it in Acrobat Reader 8 and it says that it couldn't open the document because it couldn't decrypt it. I guess that Acrobat 9 has some new encryption scheme that is incompatible with previous versions, including Apple's Preview.
I'd like to know if a fix for this is planned.
Thanks a lot!

WSAD: Evaluating JSP includes in JSP Preview

Similar Messages

Maybe you are looking for