Wsdl host:port default values

Hi,
I've deployed a webservice in Weblogic 12.1.3, I expect that when I invoke the WSDL the binding address will be:
http://host:port/contextPath/serviceUri?WSDL
where host should be the host with which I've invoked the webservice and port the portnumber I've used in the webservice call. I mean if I call the webservice invoking directly a managed server instance with port 7103 the binding addres should be:
<service name="ComplexService">
     <port binding="s0:ComplexServiceSoapBinding" name="ComplexServicePort">
       <s1:address location="http://myhost:7103/complex/ComplexService"/>
     </port>
   </service>
The problem is that the WSDL is avoiding the managed server instance port 7103 and always is using the default protocol port 80 for http and 443 for https.
<s1:address location="http://myhost:80/complex/ComplexService"/>
Any ideas why is happening that?
Thank you.

Hi, I've checked what you said, but the configurations seems right:
Frontend Host:
Frontend HTTP Port:
Frontend HTTPS Port:

Similar Messages

Vivado 2015.1 Bug Report: Adding Required Port without Default Value in Custom Interface Definition

When adding a port using the Custom Interface Definition window and not defining a Default Value, the attached error message appears. Not only are the html tags visible, but this error should not be thrown in the first place if both Master/Slave Presense is set to "required". As it is, a port can only be added if a Default Value is given, but can be removed later from the ports table.

yes,I have successfully install petalinux2015.2,but,the issue still be the same as before,the axi 16550 is not working,when I run echo 123 > /dev/ttyS1,my ttyPS0 stop working and axi com keeping null output...
then,I try petalinux2014.4+petalinux2014.4,the difference is the ttyPS0 still alive but axi-com still null...
I found that pl.dtsi file is quite different between the three mode:
M1,petalinux2014.4+vivado2015.1
M2,petalinux2015.2+vivado2015.1
M3,petalinux2014.4+vivado2014.4
most confuse for me is the interrupt ID,
in vivado I connect the axi intterrupt to ID 62 but I get different auto generate dts file
M1:nothing about interrupt and i add manuually in system-top.file
M2:vivado ID is 61 but dts "interrupts = <0 30 4>"
M3:vivado ID is 62 but dts "interrupts = <0 31 4>"
does petalinux auto detect the vivado interrupt connection and ID and write to dts file right or User have to verify and rewrite in ststem-top.dts?
working hard for the issue and hope for a axi demo including petalinux + vivado ,help please

Restore ProxyMapping default value

Dear All,
I could not restore default value back to EP proxy mapping of HTTP provider service.
Earlier I set mapping value as 50001=(Host:<webdispatcher host>,Port:80,Scheme:http,Override:false)
I want to turn it back now.
When I logon EP with port 50000 or with port 80 via web dispatcher,protocol changes to HTTPS.
Even though I restarted EP system after restoring default value or setting 50000=(Host:<webdispatcher
host>,Port:80,Scheme:http,Override:false),50001=(Host:<webdispatcher
host>,Port:443,Scheme:https,Override:false).
How would I revise it back to default?
Any other extra procedures?
Please help.
Thanks much.

Hi,
You can restore to default values in Java System Properties > Service > Http Provider:
https://help.sap.com/saphelp_nw73/helpdata/en/48/bdba8f50dd35bce10000000a42189d/frameset.htm
https://help.sap.com/saphelp_nw73/helpdata/en/47/b08e12542e3378e10000000a421937/content.htm
Regards,
Rajendra

Opening Build Specification - Error 7 occurred at Get LV Class Default Value.vi

I recently ported my project to a new PC. Everything seems to run fine uncompiled, and I am able to build an executable without issue. However, my build specification shows up in the project explorer with question mark next to it. When I try to build again or edit the properties I get a popup with the information below:
Error 7 occurred at Get LV Class Default Value.vi
Possible reason(s):
LabVIEW: File not found. The file might be in a different location or deleted. Use the command prompt or the file explorer to verify that the path is correct.
=========================
NI-488: Nonexistent GPIB interface.
Complete call chain:
Get LV Class Default Value.vi
AB_UI_Initialize_Framework.vi
AB_UI_FRAMEWORK.vi
AB_Item_OnDoProperties.vi
AB_Item_OnDoProperties.vi.ProxyCaller
LabVIEW attempted to load the class at this path:
<Empty Path>
I've seen messages from people getting the same error when trying to run a compiled executable, but mine actually runs fine. I am just unable to open the build specification to rebuild or edit its properties.

This application is for a Windows machine, and I am not using the Report Generation Toolkit. However, I shut down my computer last night and when I booted it up this morning my Build Specification now opens fine and I am able to edit it. My only thought as to why it occured in the first place is that I had added several files to user.lib and instr.lib and restarted LabVIEW, but it appears that it required my computer to be restarted as well.

.INI files vs .TXT files for changing default values in a .EXE?

Hi,
I have a two-part question related to updating the default values of controls in an executable:
I am creating a LabVIEW executable for installation on two different production-floor computers.   I need to be able to change the default values of the front panel controls (as I would do with the “make this value default” command during development). From reading prior posts, I understand that I could use the “Write Configuration Settings File.vi” and “Read Configuration Settings File.vi” to generate a .INI file that would be read by the .EXE and would establish the desired values of the controls. However when I took a look at the block diagrams for those configuration .VIs, they don’t appear (to me) to be any easier to use than just reading values from a spreadsheet file. IE: Instead of using these configuration files and a .INI file, could I not instead just read values from a .TXT file that contains the desired values?   I’ve never used a .INI file before, or had to worry about “keys” and “sections,” so from my (perhaps naïve) perspective, the .INI method seems less easy to use. Is there any advantage to the .INI format?
Regardless of whether I use the .INI file or a .TXT file, I have this additional problem: One of the things that changes when I install my .EXE file on a new computer is the COM port numbers used by two serial devices.   (On my development computer, the two serial devices use COM5 and COM6, whereas on the two production-flood computers, the COM ports will almost certainly be different).   I suppose I could use the Device Manager on the production-floor computers to change the COM ports to be the same as those on my development computer, but I’d prefer to be able to (again) change the default value of the COM ports in my .EXE.   However, I’m not sure how to do that.   The configuration VIs, have options for reading / writing Booleans, strings, paths, and numeric, but not, (so far as I can tell) for a VISA class.
Any thoughts / suggestions are welcome. Thanks.
Solved!
Go to Solution.

Dan_the_Clam wrote:
Thanks for your reply, Yamaeda,
Great that I can use a string to open a VISA session - I had no idea. I'll try that.
And - ah - you are right about the .INI files. I just did an experiment in which I re-ordered the sections and randomly changed which letters were capitalized in the key values, and the "read configuration settings.VI" still read the file correctly. Thanks for that.
Unfortunately, in my existing code, the controls on the block-diagram aren't all co-located together; they are scattered throughout the block diagram - some of them in case structures and loops.   I suppose that means I'll have to move them all to the left side of the block diagram, route them to these "Write Key.VIs" and then wire them up into the cases and loops with fairly long wires.   It's just a hassle, and is going to make my block diagram more complicated.  Well, I suppose that's how one learns...
Thanks again.
dan
Assuming you have a state machine and an Init state it's a fair use of Local Variables to update controls from the ini-file. The same goes for saving the values.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV

Field 'record_EMP_ID' doesn't have a default value

I solved org.hibernate.TransientObjectException by adding "@OneToMany(fetch=FetchType.EAGER, cascade=CascadeType.ALL)"
But this time values can't be inserted to DB.
OS : Windows 7
JDK : JDK 1.6
JBoss : JBoss 5.1.0.GA
DB : MySQL 5.5
Error is "Field 'record_EMP_ID' doesn't have a default value"
- Members.java
@Entity
@Table(name = "family")
public class Members implements Serializable {
@Id
@Column(name = "EMP_ID")
private String id ;
@Column(name = "EMP_Passwd")
private String passwd ;
@Column(name = "EMP_Name")
private String name ;
@OneToMany(fetch=FetchType.EAGER, cascade=CascadeType.ALL)
@JoinTable(name="info", joinColumns = {@JoinColumn(name = "EMP_Name")})
private Collection<Records> record = new ArrayList();
....getter and setter
- Records.java
@Entity
@Table(name = "info")
public class Records implements Serializable {
@Id
@GeneratedValue(strategy=GenerationType.AUTO)
@Column(name = "EMP_ID")
private int i;
@Column(name = "EMP_Name")
private String name;
@Column(name = "EMP_Bank_Account")
private String account;
@Column(name = "EMP_Hobby")
private String hobby;
@Column(name = "EMP_Phone")
private int phone;
...getter and setter method
in jsp file I invoke EntityManager.persist
Context ctx = new InitialContext();
IMappingTestPort port = (IMappingTestPort) ctx.lookup("MappingTestBean/remote");
Records r = new Records();
r.setName("aaa");
r.setAccount("111-2222");
r.setHobby("bbb");
r.setPhone(021112222);
Members m = new Members();
m.setId("aupres");
m.setPasswd("aaa");
m.setName("ccc");
m.getRecord().add(r);
port.setFamilyMember(m); // This EntityManager.persist method
But it failed.
In console
20:21:29,233 INFO [STDOUT] Hibernate: insert into family (EMP_Name, EMP_Passwd, EMP_ID) values (?, ?, ?)
20:21:29,268 INFO [STDOUT] Hibernate: insert into info (EMP_Bank_Account, EMP_Hobby, EMP_Name, EMP_Phone) values (?, ?, ?, ?)
20:21:29,288 WARN [JDBCExceptionReporter] SQL Error: 1364, SQLState: HY000
20:21:29,288 ERROR [JDBCExceptionReporter] Field 'record_EMP_ID' doesn't have a default value
record_EMP_ID is automatically generated by hibernate
Pls help!

An update:
New virtual machines created after the integration is in place is visible in Virtual Machine Health Dashboard. No other dashboards seems to contain any data.

Host / Port in the hyperlinked field.

In the RTF data template added hyperlink on the field,
This hyperlink should fetch HTTP host/port from the variable declared in the xsl file.
So that report could run without hard coding the host / port in the hyperlink.
When tried to embed the <xsl:value-of select="$port_name"/>;?>
BI Publisher couldn’t decode the variable value.
Please suggest a way to implement this.

I tried to add the statement to the init.ora file which is referenced by the inittest.ora file, and the error message changed to the following: (By the way, am I supposed to modify anything in order to use JDBC, or it should be fine after it has been installed?) Thanks.
Exception in thread "main" java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:168)
at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:208)
at oracle.jdbc.ttc7.O3log.receive1st(O3log.java:428)
at oracle.jdbc.ttc7.TTC7Protocol.logon(TTC7Protocol.java:248)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:249)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:36
5)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:260)
at java.sql.DriverManager.getConnection(DriverManager.java:517)
at java.sql.DriverManager.getConnection(DriverManager.java:177)
at JDBCExample.main(JDBCExample.java:10)

Dynamic variable in 11g rpd - character 'd' got appended to default value

Hi All,
We have recently upgraded to 11.1.1.6 version from obiee10g.
We are facing an issue with default initializer in the dynamic variables in the RPD.
For one of the dynamic variables XYZ_YEAR default value is '2013.0d' in 11g. In 10g for the same dynamic variable XYZ_YEAR default value is '2013'.
As we are using this variable on the 11g dashboard the following error has been thrown -- A numeric value was expected (received "2013.0d")
After the upgrade we are unable to do online changes to the RPD. That is another issue.
So, coming back to the variable issue. I have taken a offline copy of the rpd and changed the default value of the variable to '2013.0'.
And ported the offline rpd via EM. Initially, it seemed to be resolved. But, after sometime the dashboard got errored out with the same error.
I went back to check the online rpd and saw the dynamic variable's default value as '2013.0d'
I have tried making changes in offline rpd twice and ported the rpd via EM but the issue still persists.
Thanks,
Obul
Edited by: obul on Nov 23, 2012 3:44 AM

An easiy solution to this issue is to change the SQL for the initialization block to look like this:
select cast(year as number (4,0)) from blah....
The ,0 in the number specifier truncates any decimal data, and OBIEE then sees it as an integer type instead of decimal. Sorry, I posted this answer in another thread, but there seem to be quite a few threads about this issue.
Hope it helps!
Scott

Smartview Error: "Cannot Connect to Provider. Make Sure It Is Running in the Specified Host/Port (503)

I am having an issue retrieving on a SmartView grid running 11.1.2.2.309.01 and SmartView 11.1.2.2.102.I have a grid with three attribute dimension and, at first it was long running and gave me a netretry netinterval error. I shared with my administrator and, they gave me the registry updates to increase my timeout for my default browser. Now, I try to retrieve the same sheet and after approximately five minutes, I get the message, "Smartview Error: "Cannot Connect to Provider. Make Sure It Is Running in the Specified Host/Port (503)". I am not sure what this means. I can retrieve on other grids with one attribute dimension or a regular retrieve but, for some reason, I notice when I retrieve on multiple attribute dimensions, I am having this issue. I had this tested with others and, they are experiencing the same result. Any thoughts. Thanks in advance

The timeout was updated to 7 minutes but, the timeout on the APS was never updated. What happened was there was a 7,000 member dimension where attributes where being used to build a retrieve. The attributes were what was causing the issue. Not to say you should not use attributes. Ultimately, an alternate hierarchy in the 7,000 member dimension will help but, I used other members to get the results I need. I just never saw the error message before and, did not see it in oracle support.. Thanks.

WDA application on virtual host (port)

Hi,
is there a way how to deploy (create) a webdynpro application on a virtual host (port)? As I generate a webdynpro application, SAP creates a service under default host (port). I need to have my application accessible only on virtual host (port) - different to default. Therefore alias cannot be used. I haven't found any parameter how to set this port when I create a WDA application in SE80.
I'm looking for some system setting or configuration, not application solution.
Thanks.
Petr

Without adding a virtual host, did you try using the following arrangement?
Port 80
Listen 77777
No virtual host is used here assuming you have only one application - which is this form application whose physical port is 7777.
thanks,
AMN

Error in Displaying Default Value calculacted by Service

Hi Experts,
In my VC Model i had a Drop down on Week No with Static List of week no from 1-52.
Which is working fine,User selects the Week No he wants and that week no is sent an a variable to query....
And my requirment is to display Current Week no as a Default Value of the Week No drop down list.
I defined a Data service in VC which is based on Function Module in BI ...which give the current week no.
When i included the Data Service to model...Its input is connected to Start and output is connected to Store.
Now i connected out put of service which is connected to Store to In put of variable form and Week no dropdown button in default Value formula i included the week no which is out put of service
But when i executed the iview its not displaying current week (which is output) of service as a default value
Please update where i was wrong
Thanks

Hi,
I am using the same FM DATE_GET_WEEK
Could you please explain me in detail..
Currently i had a Variable form with that connects to 2 diff queries.
I had a user entry variable on Cal week/year on those 2 queries.
My requirment is to create a drop down on week...so the user selects the desired week (from the static list) and that week is concatenated with current year (from now()) and go to variable of query.
it is working correctly........
Now for this week drop down the default value should be current week no.
Please explain on how to do this
I used service DATE_GET_WEEK .....
How do you connnect the input and output ports of this service
Thanks

Regrading how to change SLD host port?

Hi All:
I'd like to import some product component
from system landscape Directory, but it fails
because a wrong host port was assigned to it.
do you have any idea to change host port. which
file contain the host port
Thank you very much!!!

Hiii Sony !!
When you run SXMB_IFR transaction or when you run the SLDCHECK transaction.. U can find port no.
The default port number should be as I stated before.
Integration Builder Address not maintained
Check the config in tcode SLDAPICUST. Here u can change :
for example...
SLD hostname: is the hostname where SLD is installed. In your case it could be same as solman server name
SLD port: 5<J2EE instance no>00 (eg. 50000)
SLD gateway host: is the hostname where SLD is installed. In your case it could be same as solman server name
OR
Maintaining SLD Connection Parameters
1. Log on to the SAP System and call transaction
SLDAPICUST.
The screen Maintain SLD Access Data is displayed.
2. Choose Display<-> Change, and then proceed as follows:
a. Choose Insert Row.
b. Enter the connection parameters to the SLD:
u2212 Host Name: host name of the SLD host
u2212 Port: HTTP port of the J2EE engine (The following naming convention applies: 5<J2EE_instance_number>00. 50000, for example, if your J2EE instance is 00).
u2212 User
u2212 Password.
c. Set your entry as Primary.Only the Primary marked entry is active.
d. Save.

Custom Shared Variable: Setting default values

Hi All,
Is there any way to set default value to a custom shared variable (2D Array of Strings) hosted in cFP-2220 target.
Problem: Reading a custom shared variable after rebooting the target, doesn't contains the recently updated values.
Thanks,
Bhaskar

To me the one way it is possible is to log the details to a file and upon launch read the file.

IMEI changed to default value, what do I do?

I bought officially unlocked iPhone 4 in NY. After two months of use, on the day Steve J passed away, IMEI suddenly changed. IMEI default value indicate hardware issue, but there is no advice what I should do. I talked with Jim, Senior iOS Adviser, but he could not figure out and said he asked Activation Engineer for advice. He never comes back with response. I do not know what I should do. I am on mission in Kazakhstan and there seems to be no technial support locally. Anybody know what I can do to find a solution? Forcefully change IMEI?
<Edited By Host>

You need to sign out completely on all your devices and then sign back in with the new ID. On a Mac, System Preferences>iCloud and click 'Sign out'; on an iOS device, Settings>iCloud and click 'Delete account' (this will not delete the account from the server).

Double host/port name when binding

Hi,
Can anyone answer why I get this:
//localhost:7899///localhost:7899/my_warehouseI create a registry and bind my application to it:
warehouse = new WareHouse();
registry = LocateRegistry.createRegistry(7899);
registry.rebind("//localhost:7899/my_warehouse", warehouse);Then from the client when I do a lookup:
server = (WareHouse)Naming.lookup("//localhost:7899/my_warehouse");I get this:
java.rmi.NotBoundException: my_warehouseAnd when I do a listing:
String[] list = Naming.list("//localhost:7899/");
for (int i=0; i < list.length; i++)
System.out.println("i " + i + ": " + list);
I get this:
i 0: //localhost:7899///localhost:7899/my_warehouseHow come?
Why do I get "double host/port" names?
Is it because I do createRegistry inside the code?
/Fredrik

registry = LocateRegistry.createRegistry(7899);
registry.rebind("//localhost:7899/my_warehouse",
warehouse);Don't use a URL when calling methods on a Registry object. The bound name here is the entire URL, all you want is the my_warehouse part. You've already specified the hostname:port when you got the Registry stub from LocateRegistry.
server =
(WareHouse)Naming.lookup("//localhost:7899/my_warehouse");Do use a URL when calling methods on Naming. The above is correct but it is looking in a Registry at //localhost:7899 for a name 'my_warehouse'.
java.rmi.NotBoundException: my_warehouseExactly.
Re the listing, Registry.list() returns values that can be plugged straight into Registry.lookup, i.e. no URL part. Naming.list() returns values that can be plugged straight into Naming.lookup(), i.e. with a URL part.

Wsdl host:port default values

Similar Messages

Maybe you are looking for