WSDL Parser [Is anyone else testing WCF-based webservices?]
I'm encountering the following message when attempting to force the use of the .NET parser when interrogating the WSDL of a new webservice:
Parsing specified wsdl...
Connecting to https://BLAH-BLAH/MobileTerminated.svc?wsdl
Validating https://BLAH-BLAH/MobileTerminated.svc?wsdl
.NET Parser could not parse https://BLAH-BLAH/MobileTerminated.svc?wsdl
Warning:Selected .NET Parser is invalid.
Must installed the .net sdk Framework.
Failed to parse https://BLAH-BLAH/MobileTerminated.svc?wsdl
Am I correct in interpreting this as "you need the .NET SDK installed in order to use the .NET Parser within OATS"?
I already have .NET framework 3.5(SP1) but not the SDK.
[UPDATE] It is probably significant that the webservice I need to test is WCF-based.
Edited by: IHodgetts on May 21, 2010 5:45 PM
Edited by: IHodgetts on Jun 21, 2010 12:07 PM
I know I'm answering my own post here, but a lot of work has gone into this and someone else may as well benefit from my findings...
It would appear that OATSv9.10 does NOT support WCF-based webservices. The problem is apparently down to OpenScript not supporting WS-Addressing (part of Windows Communication Foundation) and this isn't currently scheduled for inclusion in v9.20 (much to my disappointment).
However, I have in the meantime found a workaround. Basically IGNORE what OpenScript populates the request with!
1) Use the OpenScript parser (the .NET parser will not work) to parse the WSDL.
2) Add the method(s) you require to the script.
3) The script will at this stage have two problems but can be used as a starting point.
Problem #1 - The content-type will need to be manually changed from "text/xml;charset=UTF-8" to "application/soap+xml; charset=utf-8". Edit this by right-clicking on the request and selecting "Headers" then "Content-Type".
Problem #2 - The contents of the request will not include the WS-Addressing information. One workaround is to obtain a working packet to replace this e.g. from a test harness for your WCF-webservice. Edit this by right-clicking on the request and selecting "Post Data". Replace the WHOLE string with a valid packet from your test harness.
Hopefully this will assist anyone else trying to get this working :-)
Similar Messages
-
Has anyone deployed JAX-RPC based webservices on WebLogic8.1
Hi all...
I 've been trying to deploy the jaxrpc based webservices on weblogic8.1/6.1....but its not working...it works fine on tomcat server...
so if anyone has deployed and tested the webservices on weblogic successfully...pls help..
thanks
khajaMJwenting,
Thanks for your reply.Could you please tell me what should I need to perform to overcome this problem.I have pasted below my client program for your reference.
import org.apache.axiom.om.OMAbstractFactory;
import org.apache.axiom.om.OMElement;
import org.apache.axiom.om.OMFactory;
import org.apache.axiom.om.OMNamespace;
import org.apache.axis2.Constants;
import org.apache.axis2.addressing.EndpointReference;
import org.apache.axis2.client.Options;
import org.apache.axis2.client.ServiceClient;
import org.apache.axis2.context.MessageContext;
public class AxisBasedClientForJWS {
private static EndpointReference targetEPR =
new EndpointReference("http://localhost:7001/final/IntegWebservice");
private static OMElement getResponse(String symbol) {
OMFactory fac = OMAbstractFactory.getOMFactory();
OMNamespace omNs = fac.createOMNamespace("http://IntegratorWebservices.org/wsdl","");//"http://IntegratorWebservices.org/wsdl", "tns");
OMElement method = fac.createOMElement("add", omNs);
OMElement value = fac.createOMElement("symbol", omNs);
value.addChild(fac.createOMText(value, symbol));
method.addChild(value);
return method;
public static void main(String[] args) {
try {
OMElement getResponse = getResponse("WSO");
Options options = new Options();
options.setTo(targetEPR);
options.setTransportInProtocol(Constants.TRANSPORT_HTTP);
ServiceClient sender = new ServiceClient();
sender.setOptions(options);
OMElement result1 = sender.sendReceive(getResponse);
String response1 = result1.getFirstElement().getText();
System.err.println("Current price of WSO: " + response1);
} catch (Exception e) {
e.printStackTrace();
System.out.println(e);
With regards
Ramesh.G -
Visual Voicemail problem on 02-UK, anyone else??
I'm having a problem with my iPhone 3GS atm.
Its to do with Visual Voicemail, basicly when some one leaves a message the phone doesn't inform me of it like it used to do a few weeks ago.
If i turn the phone off with the red slider and power back up it detects them instantly and they are there to view as normal.
I have phoned O2 and they have told me to turn VM off then on again with the 1760 and 1750 numbers, that didn't solve it. They have told me to reset my network settings this didn't fix it either. As of now they don't know what else to try as it is working its just the phone isn't retrieving them while its on.
Updated to 3.0.1 the other day could be this but cant see how.
The US network has a problem it seems with this atm.
I can hold down the "1" and check for messages manually but its not ideal.
All i can do now is take it to an Apple or O2 shop to see if the phone is broke somehow but i don't think its this its a network thing i am sure.
I never lose the 3G signal so its not that and roaming is 'off' which is what O2 told me to set it at. (i have tried it with it on as well)
I can make calls etc fine, i can use the net just fine. I have turned wireless mode off and tried it while connected to my wireless network.
Can anyone else test theirs and report back by just ringing their own phone plz???I seem to have found a solution that works for me:
The problem seems to be occuring only after I delete unheard visual voicemails... I, then, don't seem to be able to receive new voicemails until I turn my iPhone off and back on (or do a hard reset).
However this problem doesn't occur if I listen to my messages before deleting them...
So bottomline: listen to your messages entirely and before you delete them...
Calling my usual voicemail number (not using visual voicemail) to listen to messages that haven't gotten to my visual voicemail seem to reset everything and enables me to receive new visual voicemails... -
I can't import an audio cd to itunes to add to my library. I ran a diagnostics test and it had a red light next to: Unable to access audio cd. I am wondering if anyone else has had this problem and if there is an easy solution?
Satellite L675-S7113 Specifications (PSK3AU-07C02S)
Satellite L675-S7113 Support Page
rwls wrote:...since I got it 3 years ago I've been unable to burn an audio CD from ITunes or Windows media although it worked once after the computer had been shut off for awhile..and didn't find the problem until after my warranty had expired...
From your statements above, it sounds like you never tried to burn a CD for at least the first year that you owned the laptop, as it had a one year warranty on it. While you might have used it frequently to install software, play DVDs, Blu-Ray disks, etc, that's unclear from your statements. Nonetheless, it might just be dirty-dusty. So, before deleting-uninstalling any software, and given they're cheap, try a CD-DVD Cleaner Disk first and see if that resolves your problems.
Let us know what happens. Good luck.
Mike -
Does DotA 2 Test crash for anyone else?
DotA 2 Test is now available on Steam for Linux and for me, I keep getting illegal instruction calls which crashes the game every time I actually try to start a game of DotA. I can use the lobby fine and change graphics settings and everything but actually trying to play the game calls things it shouldn't be, apparently, and the core is aborted or dumped or whatever it's called.
Has anyone else been experiencing a similar error?i can run Dota 2 test but when I'm in game I have this problem https://github.com/ValveSoftware/Dota-2/issues/36
Pc specs:
AMD Phenom(tm) II X4 945 Processor × 4
ram 6GB
ATI 4850HD 13.1 catalyst driver
I added these options in /etc/X11/xorg.conf and my fps increased from 10 to 30 fps. But i still have graphic artefacts on screen.
Option "AllowGLXWithComposite" "true"
Option "backingstore" "true"
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
Option "backingstore" "true"
Option "Monitor-DFP2" "0-DFP2"
Option "AllowGLXWithComposite" "true"
Option "UseFastTLS" "off"
BusID "PCI:1:0:0"
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Last edited by marceel (2013-07-14 09:16:09) -
TS4002 is anyone else having trouble searching in their cloud based email?
Is anyone else having trouble searching their cloud based email?
I am! I haven't been able to access my emails properly for the past week. And my icloud accound is my work account. Whenever I click to open an email a window comes up saying 'Mail has stopped responding'. What is going on Apple???
-
Since day light savings, events are not saving in my calendar. Has anyone else had this problem?, Since day light savings, events are not saving in my calendar. Has anyone else had this problem?
Greetings,
I have not heard of that issue although some people have reported events showing an hour earlier / later (though I haven't seen that personally).
Questions:
What version of the Mac OS are you running (Apple > About this Mac)?
Can you make an event and then it just disappears?
Are you using iCloud / MobileMe / Google / Yahoo / Some other server based calendar?
Try these in order:
Go to Apple Menu > System Preferences > Language & Text > Formats > Region. Region should be set to the country of your choice. Do not have it set to "Custom" as this can have unexpected results in the iCal window.
Go to Apple Menu > System Preferences > Date & Time and make sure the Date and Time are correct and that the correct Time Zone is selected.
If that doesn't resolve the issue:
1. First make an iCal backup: Click on each calendar on the left hand side of iCal one at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
2. Go to iCal > Quit iCal
3. Remove the following to the trash and restart your computer:
Home > Library > Caches > com.apple.ical
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
--- NOTE: To get to "Home > Library" in Lion: Click anywhere on the desktop and then click on the "Go" menu at the top of the computer screen while holding down the "option" key on the keyboard. You will see "Library" in the menu.
4. Launch iCal and test.
If the issue persists:
1. Go to iCal > Quit iCal
2. Remove the following to the trash and restart your computer:
Home > Library > Caches > com.apple.ical
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
--- NOTE: Removing these files may remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
3. Launch iCal and test.
Hope that helps. -
i have a 2008 imac with snow leopard. i installed update 10.9.3 not realizing it's best for Maverick's users. Now my Itunes 11.2.2 won't burn playlists to CD. Anyone else with this problem? CAn I uninstall the 10.9.3 update? Also my HP scannerwill not save the displayed scanned document since this update! it just saves gray.
If you have your old system backed up then erase the drive and restore your backup. If you don't have a backup then backup your entire Home folder. Erase the drive and install Snow Leopard after which you can restore your Home folder from the backup.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Or you can:
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
computer and after the chime press and hold down the OPTION key until the boot manager
screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall the 10.9.3 update: OS X Mavericks 10.9.3 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.3 update: OS X Mavericks 10.9.3 Update (Combo). -
SLOW internet while streaming?? Anyone else have this problem??
I've looked everywhere and I can't seem to find anyone that has this problem:
I have an appleTV using 802.11N on a gigabit AEBS, with a core2duo macbook pro. Here's the funny part. It syncs beautifully fast without a hitch. No dropouts or anything. However, while it's syncing, all internet connectivity on my macbook pro is entirely cut off! Websites won't load, email won't send, ichat logs out, everything just goes down to a crawl, meanwhile the appletv syncs very fast. I've tested to make sure the internet connection isn't down by surfing on my iPhone and my mom's imac, and they both have fine internet connectivity while the appletv is syncing.
I've also tested the network speed to and from the airdisk. I assumed if it was my macbook pro's airport card that maybe when it goes really fast, it doesn't allow other traffic. Well, I moved big files back and forth through the airdisk at high speeds and internet seems fine. It's only when it's between the appletv and the macbook pro that the internet breaks...
I also tried it through an airport express with 802.11g and slower network speeds with the same result, so that rules out the base station.
Has anyone else had this problem? It's so frustrating because I have been forced to turn off appletv syncing entirely!Well I know when syncing my iPhone, I have issues with internet speed on my Laptop (windows based) and also I cannot check email (fails to connect). Once syncing is done, mail works fine and I am browsing at full speed again.
I can only assume the sync process itself on the machine it is on is the issue. I figured it was just gonna be more so for Windows machines as iTunes on Windows is a huge resource hog when doing anything (downloading podcasts, syncing, etc). I just figured my slow internet access was more about iTunes bringing windows to a crawl during the sync and as for email assumed the sync process hoses what ports I can get out on.
Nice to see it messes with Mac users as well
Not sure why you have to turn off syncing entirely though. Won't it only do a sync if something changes? Mine doesn't sit there always sycning. -
Anyone else have problems writing taglibs?
Just a note that I solved this problem eventually -- it was a combination of
misunderstanding the tld's dtd, and a little typo.
--thanks,
-Colin Peart
"Cameron Purdy" <[email protected]> wrote in message
news:[email protected]...
> As a test:
> 1. Don't put anything between the start and end tag
> 2. Remove all other HTML except the tag
> 3. Check the XML ... there is a tag in the XML for the taglib that
> specifies whether body content is expected.
>
> Cameron Purdy, LiveWater
>
> "Colin Peart" <[email protected]> wrote in message
> news:[email protected]...
> > When trying to access a taglib extension from a jsp, here is the error I
> > get:
>
> ---------------------------------------8<---------------------------------
> -
> > Parsing of JSP File '/exampletaglib.jsp' failed:
> > /exampletaglib.jsp(5): no corresponding open tag for tag extension
close:
> > probably occurred due to an error in /exampletaglib.jsp line 5:
> > <rogers:repeater repeat=10>:)</rogers:repeater>
>
> ---------------------------------------->8--------------------------------
> --
> >
> > I can't for the life of me figure out what this means.
> > I've checked everthing I can think of, and I can tell that the tld is
> > getting properly loaded, so this looks like a problem with the jsp
> compiler.
> >
> > Has anyone else had problems with using taglibs? Any hints and
pointers?
> I
> > have spent the last day just about pulling my hair out on this one.
> >
> > Thanks
> > --Colin
> >
> > p.s. you can stop reading here unless you care to be barraged by code.
> >
> > Here is the jsp code:
>
> -----------------------------------------8<-------------------------------
> --
> > <%@ taglib uri="/WEB-INF/taglib.tld" prefix="rogers" %>
> > <HTML>
> > <head><title>Example tag lib</title>
> > <body>
> > <rogers:repeater rep=10>:) </rogers:repeater>
> > </body>
> > </HTML>
>
> ----------------------------------------->8-------------------------------
> --
> > -
> >
> > And since it is not too big, here is my java source file, Repeater.java:
>
> -----------------------------------------8<-------------------------------
> --
> > package rogers.cms.taglib;
> >
> > import java.io.*;
> > import javax.servlet.http.*;
> > import javax.servlet.jsp.*;
> > import javax.servlet.jsp.tagext.*;
> > /**
> > * Insert the type's description here.
> > * Creation date: (6/16/00 9:24:28 AM)
> > * @author: Colin Peart
> > */
> > public class Repeater implements BodyTag {
> > public int rep = 5;
> > public javax.servlet.jsp.tagext.BodyContent bodyContent = null;
> > public javax.servlet.jsp.PageContext pageContext = null;
> > public javax.servlet.jsp.tagext.Tag parent = null;
> > /**
> > * Repeater constructor comment.
> > */
> > public Repeater() {
> > super();
> > }
> > /**
> > * doAfterBody method comment.
> > */
> > public int doAfterBody() throws JspException {
> > try {pageContext.getOut().print(bodyContent.getString());}
> > catch(IOException ioe) { throw new
JspException(ioe.toString()); }
> >
> > if(rep-- <= 0)
> > {
> > return SKIP_BODY;
> > }
> >
> > file://else
> > return EVAL_BODY_TAG;
> > }
> > /**
> > * doEndTag method comment.
> > */
> > public int doEndTag() throws JspException {
> > return EVAL_PAGE;
> > }
> > /**
> > * doInitBody method comment.
> > */
> > public void doInitBody() throws JspException {}
> > /**
> > * doStartTag method comment.
> > */
> > public int doStartTag() throws JspException {
> > return EVAL_BODY_TAG;
> > }
> > /**
> > * getParent method comment.
> > */
> > public Tag getParent() {
> > return parent;
> > }
> > /**
> > * Insert the method's description here.
> > * Creation date: (6/16/00 9:25:20 AM)
> > * @author Colin Peart
> > * @return int
> > */
> > public int getRep() {
> > return rep;
> > }
> > /**
> > * release method comment.
> > */
> > public void release() {rep = 5; bodyContent = null; pageContext = null;
> > parent = null;}
> > /**
> > * setBodyContent method comment.
> > */
> > public void setBodyContent(BodyContent arg1) {bodyContent = arg1;}
> > /**
> > * setPageContext method comment.
> > */
> > public void setPageContext(PageContext arg1) {pageContext = arg1;}
> > /**
> > * setParent method comment.
> > */
> > public void setParent(Tag arg1) {parent = arg1;}
> > /**
> > * Insert the method's description here.
> > * Creation date: (6/16/00 9:25:20 AM)
> > * @author Colin Peart
> > * @param newRep int
> > */
> > public void setRep(int newRep) {
> > rep = newRep;
> > }
> > }
> > quicken02 ~/working$
>
> ----------------------------------------->8-------------------------------
> --
> >
> >
> > --
> > ------------------------------------------------------------------------
> > Colin Peart <[email protected]> "The makers may make,
> > Rogers iMedia Developer And the users may use,
> > Core Development Team But the fixers must fix,
> > 416-642-4892 With but
minimal
> > clues"
>
--An
> on
> >
> >
>
>
-
As recently as one month ago, I started experiencing a phenomenon where web-pages I was on would randomly be redirected to ad sites for knock-off MMO's. For example, if I had left a tab open to an article on Cracked.com, but was reading a different tab, the Cracked article would re-direct itself to another website. This usually was a minor annoyance, in that I would just have to go back a page in my browser, but this evening I was watching an episode on HBO Go and in the middle of streaming the video the web page abruptly changed to League of Angels. Has anyone else experienced these strange re-directs, or know what is causing them?
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,[lps]*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
HT4489 I cant seem to upload my vcard files. Anyone else having the issue or know of a fix
I cant seem to upload my vcard files to icloud contacts despite meeting all the criteria. Anyone else having the issue or know of a fix?
All Macs come with a one year limited warranty.
If you purchased AppleCare, contact info > http://www.apple.com/support/products/
Why can't you use the Bluetooth keyboard?
According to the link I posted for the AHT..
"For some Apple computers that shipped with OS X Lion, if Apple Hardware Test cannot be found on the hard drive, an Internet-based version starts up instead." -
The screen occasionally flashes purple and green horizontal lines across it. Then the buttons on the left side of my menu bar turn fuzzy, and when I click on them they become black rectangles with green and purple lines running thru them. The dock also has a hint of green and purple in it. And some of the shadows around application windows are just black outlines, instead of gradiating shadows. Is this happening to anyone else? Does anyone have a fix? I read about the other supposed graphics issues, but I think they're unrelated, or at least left unfixed by the firmware update.
All Macs come with a one year limited warranty.
If you purchased AppleCare, contact info > http://www.apple.com/support/products/
Why can't you use the Bluetooth keyboard?
According to the link I posted for the AHT..
"For some Apple computers that shipped with OS X Lion, if Apple Hardware Test cannot be found on the hard drive, an Internet-based version starts up instead." -
EOS 7D Mark II - Has anyone else experienced compatibility problems with the Tamron SP 70-300MM?
Has anyone else experienced compatibility problems with the Tamron SP 70-300MM?
Is the lensora report based on actual testing... or merely theoretical?
I'm wondering ... because there's a well-established history of 3rd party lenses that should be compatible based on the mount, but have problems anyway when a new camera model is introduced that did not exist when the lens was designed.
At the same time, if you contact the lens vendor for support, they may be able to provide better data and sometimes they can re-chip or re-flash firmware into the lens to upgrade it to a compatible state.
Tim Campbell
5D II, 5D III, 60Da -
I recently experienced an issue on my ipad2 related to location services. While connected to a wifi network, I found that apps requiring location services would not work properly and I would receive a pop up notice asking me to turn on location services. For example, the maps app would display a pop up stating "cannot determine location". My NHL gamecenter app would not allow me to watch live feeds; a pop up advised me to turn on location services. In each case, location services was in fact on.
I checked my settings, shut down the apps, restarted them, shut down the iPad and rebooted it to no avail. The internet connection was working fine as best as I could determine. The wifi network was at a guest home and the router was recently replaced. I returned to my home wifi and everything worked fine. The next day, I returned to the guest Internet connection and everything seemed to work once again. However, while watching a NHL game, during the last seconds of an overtime shoot out, I lost video and it was attributed once again to location services being disabled. Of course I checked and nothing in my settings had been altered. I went to my iPhone (3GS) and pulled up the gamecenter app and was able to watch the end of the game( via wifi connection...same network).
So, I am puzzled as to what could be causing this problem. If anyone else is having similar issues, I would like to know as well as if there are any solutions or feedback from Apple regarding this type of problem.....Dave.As the King says, if your friends wifi router was relatively new, it likely has not been picked up by Apple's location based information database system and thus there is no location information associated with it. So your iPad had no way of getting its location.
The wifi location databases are traditionally updated by wardriving - literally companies employ people to drive around sniffing out active wifi signals and associating an approximate location to it. Some companies also have web sites to submit that information if owners wish to (Apple does not seem to have one though), and the various companies with wifi location databases buy and sell their information. Bottom line is though, it can take weeks, months or sometimes even longer for a residential router to get picked up - depends on where you live (more rural, likely the longer time it takes).
When I moved from VA to NC it took up to 6 months for mine to reflect my new location (I checked it once the week I moved in, and then periodically thereafter, and it finally was getting it right after about 6 months) and I live in a pretty densley populated area (triangle NC).
Maybe you are looking for
-
File.lastModified() not working in MAC OS
Hi all, Iam trying to get the lastmodified time of a file using this File newFile=new File(uploadFilePath); //uploadFilePath has the path of the file. String newFile_Name=newFile.getName(); long lastmodified=newFile.lastModifi
-
PS CS3 random errors with Lightroom folder when making contact sheets
When I make contact sheets in Photoshop CS3 of photo files in a folder of images exported from Lightrom Beta 2, it places some of the pictures randomly across the contact sheets, especially when I have more than 60 or more images. The first shot will
-
Hi Linksys, I have V1.00R24 of the firmwar installed. The PC is a HP Quad core running Vista Ultimate. Router is a Netgear DG834G ADSL Router (Sorry). Can you please assist with the following? Wireless Setup. I cannot set up the camera with either
-
ROWNUM, Cursor, and Paged Reports
I am using ASP against a Oracle 8i DB in a web application. I have some large reports (approx 2,000 records) that I need to display on the site in a paged style report. i.e. 25 records on page 1, 26-50 on page 2, etc...... Much like you see here at O
-
Hi, Good day to you all; We have a requirement to print in the Customer Invoice details as to Bank Account and also its Postal Address, email etc; I have first a Basic Question: Which TCode is to be used for creating a (New) House Bank? Secondly, for