WTC call from Tuxedo gets to WebLogic but fails (WebLogic 10.0)
I set up a WTC connector and I am trying to invoke an EJB on my WebLogic server (10.0).
I followed the quick-start example from the documentation.
I enabled "debug mode" and "user data dump".
When I perform the call from Tuxedo to my EJB I see that the inbound message, but on the Tuxedo server side I get an error "can not find service TOUPPER".
What can cause this behaviour?
I don't get new log messages after adding the new system property.
I'll describe the configuration I am using:
In Weblogic:
- I created a WTC server called "mySimpapp"
- I created a Local AP with name "myLocalAp", ID "TDOM2" and network address "//wlserver:12378"
- I created a remote AP named "myRemoteAp" with the ID "TDOM1", local acces point "myLocalAp"
and network address "//tuxserver:1234"
- I created an exported service named "mySimapp" with local access point "myLocalAp",
EJB name "toUpper#com.wtc.poc.ToUpperBean" and remote name "TOUPPER"
In Tuxedo, this is my DM config file:
*DM_RESOURCES
VERSION=U22
*DM_LOCAL_DOMAINS
TDOM1 GWGRP=GROUP2
TYPE=TDOMAIN
DOMAINID="TDOM1"
BLOCKTIME=20
MAXDATALEN=56
MAXRDOM=89
DMTLOGDEV="/home/user1/tuxedo/dmt"
DMTLOGNAME="DMTLOG_TUXDOM"
*DM_REMOTE_DOMAINS
TDOM2 TYPE=TDOMAIN
DOMAINID="TDOM2"
*DM_TDOMAIN
TDOM1 NWADDR="//tuxserver:1234"
TDOM2 NWADDR="//wlserver:12378"
*DM_REMOTE_SERVICES
TOUPPER RDOM="TDOM2"
In my WL server log file I see that the connectino was established and I see the inbound request, but then it looks like the request was discarded (nothing in the log file).
Can this information help you understand the problem?
Thanks
Similar Messages
-
my Iphone 4 screen has gone blank... If someone calls the person gets full ring but no display on my screen... niether home button nor power off button is working... help!
Try press and holding down the Power and Home button until you get an Apple icon on the screen.
http://support.apple.com/kb/ts1445 -
I can't make calls from my iPhone 4 but I can receive calls and browse Internet.
Surprise!!!!!! Phone won't make and accept any calls :)))), mine works the same. Soft failure, did everything for 2 weeks.
-
I am trying to call from Pakistan to UK landline but its not working!
Hi Team, I am resident of Pakistan, and trying to call landline numbers in UK, I have credit in my account, but it seems that every time I call, there is nmo tone and after 15 - 30 secnds the call drops, by saying "No Answer". I tried on 30 + numbers but the promblem persist. There is only one incident were line got connected but after 5 PM GMT. Is it any restriction that from Pakistan we can't call during office hours to UK. Can any one help! RegardsSalman
1. For third party hardware or software, contact the maker/developer directly.
2. Read the threads in "more like this" alongside your original post.
3. Anything that requires Java is a security risk. -
While Creating Web service call from JDeveloper getting http 403 error
1. I have created the new application as Oracle Fusion (ADF) application
2. I have included the web service technology to the application
3. I am trying to create new web service data control layer , after specifying URL we are getting the following error
WSDL:Exception:fault code:=OTHER_ERROR failed read from WSDL from http://10.141.28.242:1030/oraclediagent/OdiInvoke?wsdl
HTTP connection error code is 403.
could anyone please try to solve this
thanks
887401HTTP 403 means you don't have permission to access that URL. Have you supplied credentials?
-
Facetime call from a contact but connected to another random stanger.
Hi there, I'm using an iPhone 5S. Recently I received a few facetime calls from one of my contact, but it turned out to be the same random stranger from another part of the world! Anyone facing the same problem?
Check to see if you have an old phone number associated with this person in your address book. When you call someone on Facetime it calls ALL numbers/emails associated with that persons contact sheet! This was my problem, this stranger has my husband's old phone number!
-
Hi, everyone.
I am developing some bb application which needs to catch and handle the number user called. When I tried to make a international call with "011" in front of the country code and number from address book(I saved the thole sequence as an entry in address book), I found the number I actually called was without "011" and the call can't get through. But it works if I call by manually dialling or from call log. Could anyone tell me what is the difference with calling from address book? Why bb removed "011" in front? Any suggestion will be appreciated. Thanks in advance.Hi, you need to setup the device phone number, go to menu, phone (pressing the green key), press menu again, options, smart dialing
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved. -
Bluetooth and direct call from Outlook 2010 issue
Hello.
I connect Nokia 5300 via Bluetooth and can call from Nokia Communication Center. But when i try to call from Outlook, phone begins dialing and immediately shows strange icon "D" and break dialing.
If i connect via USB - all work without any problems - form Nokia Communication Center and from Outlook also.
In OS Nokia is shown as Standard Modem via Bluetooth (Microsoft)
PC Suite 7.1.6
Windows 7 x64 Ultimate RUS SP1
Outlook 2010 x64Workstations are on a domain
Also it may appear to be more of a issue with 2000 .pub type of files. As users can create a 2010 .pub file and it works great fine. But every time a user opens a 2000 .pub file via outlook and tries to edit and save it requests the
user to do a save as, vs. save to outlook temp location. -
Problem sending calls from iPhone 4
My iPhone 4 does not receive calls from my fixed home line - but sending calls anywhere is apparently no problem - have been through complete Apple procedure for resolving problem (reinitialisation etc) but without success - any ideas out there ?
Thanks for responding so quickly !
In response to your queries:
- I have not yet consulted the carrier as yet (guess that is my next action tomorrow !)
- The fixed phone only seems to have a problem in calling my cellphone and no other !
- I have not tried to call my cellphone yet from other fixed phones
- My cellphone receives calls from other cellphones
Hope this gives you a lead ! -
I see how I can call from US to Brazil. But I want a subscription for calling from Brazil to the US. What do I do?
annescott-markl wrote:
I see how I can call from US to Brazil. But I want a subscription for calling from Brazil to the US. What do I do?
If you want a subscription, you want the Unlimited USA & Canada. You can call landlines and mobile phones in the USA and Canada for US$ 2.99/month. Otherwise, you can go without a subscription and pay per call. Rates for calls to the USA are 2.3 US cents/minute plus the connect fee, or 6 cents/minute plus the connect fee for Alaska.
Unlike calling to many other countries including Brazil with Skype, there is no price difference between calling a landline and calling a mobile phone in the States.
Click on the Subscriptions link at the bottom of this page, and put in USA for the desired country to see the subscription. Hope this helps...
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype. -
What the best way to call twenty tuxedo domains from one weblogic server use WTC
I need to call twenty tuxedo domains from one weblogic server use
WTC. the Service be called in the twenty tuxdo domains are same, do I need to
write twenty EJB in the weblogic server to call the same service? who have good
adea to deal with this problem?Hi,
I have a question on the second case. When the client doesn't care of which
Tuxedo domain it is hitting. What happens if one of the Tux domain is down ? What
happens to the client request to that domain ?
Another question is lets say i have a Tuxedo configuration as MP mode( Multi
machine mode) how does WTC load balance between the Tuxedo domains.
Thanks,
Srinivas
"A. Honghsi Lo" <[email protected]> wrote:
Hi xcjing,
One way to handle your needs is to use local service name to remote
reservice name translation. For instance,
(in 6.1,6.0 WLS)
<T_DM_IMPORT ResourceName="TOUPPER1" LocalAccessPoint="WTC"
RemoteAccessPointList="TUX-DOM1">
<RemoteName>TOUPPER</RemoteName>
</T_DM_IMPORT>
<T_DM_IMPORT ResourceName="TOUPPER2" LocalAccessPoint="WTC"
RemoteAccessPointList="TUX-DOM2">
<RemoteName>TOUPPER</RemoteName>
</T_DM_IMPORT>
<T_DM_IMPORT ResourceName="TOUPPER3" LocalAccessPoint="WTC"
RemoteAccessPointList="TUX-DOM3">
<RemoteName>TOUPPER</RemoteName>
</T_DM_IMPORT>
etc
With this configuration if your client have to call "TOUPPER" service
in
TUX-DOM1 then you code your client to call "TOUPPER1" and the request
will be routed to TUX-DOM1. The same way for request has to go to
TUX-DOM3, your client calls "TOUPPER3" service and WTC will route it
to
TUX-DOM3. In this remote name translation you may have to write 20 EJB
although they are almost the same. However, if your EJB can analyze
your client input to decide which Remote Tuxedo Domain to send the
service request to then you probably only need one EJB.
In the case that your client does not care which remote Tuxedo Domain
provides the service then adding
<T_DM_IMPORT ResourceName="TOLOWER" LocalAccessPoint="WTC"
RemoteAccessPointList="TUX-DOM1">
<RemoteName>TOLOWER</RemoteName>
</T_DM_IMPORT>
<T_DM_IMPORT ResourceName="TOLOWER" LocalAccessPoint="WTC"
RemoteAccessPointList="TUX-DOM2">
<RemoteName>TOLOWER</RemoteName>
</T_DM_IMPORT>
<T_DM_IMPORT ResourceName="TOLOWER" LocalAccessPoint="WTC"
RemoteAccessPointList="TUX-DOM3">
<RemoteName>TOLOWEr</RemoteName>
</T_DM_IMPORT>
etc
Will load balance your client "TOLOWER" service request among your 20
remote Tuxedo Domain.
However, there is a bug in WTC that causes the Remote Service Name
translation functionality not working properly. It is fixed in the
upcoming release of WLS.
Honghsi :-)
xcjing wrote:
Thank you very much! But I still have question, give an example,
twenty Tuxedo domain is named domain1,domain2,....domain20. The
same Tuxedo Service: TOUPPER is deploy on those twenty Tuxedo domains,some time
I need call the TOUPPER Service on domain1,saome time I need call theTOUPPER
Service on domain3 or
other domain depend on the input from client. you mean I need to importThe TOUPPER
Service from twenty Tuxedo domains in the console,then write one EJBto call the
TOUPPER Service,but how can the EJB know which Tuxedo domain's TOUPPERto call
from?
Thank you!
"A. Honghsi Lo" <[email protected]> wrote:
hi xcjing,
You don't have to write 20 beans or deploy 20 beans because there
are
20
remote Tuxedo TDomain you need get the service from. Of course, WLSand
WTC does not prohibit you from doing it though. Whether you need20
beans or not depend more on you architecture.
To access 20 remote Tuxedo Domain from one single WLS with singleWTC
you can configure 20 remote Tuxedo Domain in the BDMCONFIG (6.1,6.0)
or
from the console (7.0). You import 20 services one from each remote
Tuxedo domain. You write one bean, and deploy one bean. Your WLS
clients will be able to access THE ejb, the EJB will access the WTC
service, and WTC will load balanced the service requests among the20
remote Tuxedo Domain.
Regards,
honghsi :-)
xcjing wrote:
I need to call twenty tuxedo domains from one weblogic server use
WTC. the Service be called in the twenty tuxdo domains are same,
do
I need to
write twenty EJB in the weblogic server to call the same service?
who
have good
adea to deal with this problem? -
My iphone 4 does not register calls made to it. if i make a call from another phone, i can hear it ringing, but it does not register on the iphone. also, i do not get any messages when this happens. then after a day or two it decides to start working.
Clean iPhone charging port with clean dry toothbrush. See if better. If still problem clean charging port again with toothbrush and small amount of Isopropyl Alcohol.
-
Is it possible to get iPhone audio (telephone calls) from Lightning connection? Music works, but calls switch to internal or extenral speakers, not lightning (for e.g. docking station, car...)!
I want to get the audio out of the lightning connection (the way you get audio when you connect it to a dock). It works properly with music, but when making a telephone call, it switches to the internal speraker. You can change to the external spekers, but you cannot select another audio out. It's also possible to get the telephone audio from the analogue connection, but that's not what I want. I want telephone audio from lightning...
Would be so great if anybody has an ideaI must also say that the second update ruined my Lumia's battery life.
With the first (out-of-the-box) update the phone usually had 30 percent of battery after a quite hard day (e.g. more than an hour of talking via bluetooth handsfree, more than two hours of listening to the music via bluetooth, more than an hour of browsing via wifi, and reading hundreds of e-mails via two mail accounts). I never managed to discharge it after one day (e.g. 14-16 hours) of continous use, no matter how much I talked, listened and browsed.
Now, with the secod update, it discharges to 20% after 12 hours of laying still almost without use (30 mins of music, less than 15 mins of talking and nothing more), and discharges completely with the usage pattern described above.
Did the second update contain some Android code? -
I try to buy the music from itunes store but is fall but I get a call from my bank say it's be charge and because I try twice so it's charge twice, too
please help my
by SylviaIf it has a cloud icon it means its no longer on your device. Tapping on the cloud will effectively reinstall the App from scratch to your device.
There is no way to remove it from the cloud because its not yours to remove from there. Its the general App repository, you are just given access to it to download content you've already purchased. -
IPhone4 gets calls from contacts but when attending, the call is reversed.
My iPhone 4 with iOS6 occasionally gets a call from my contacts and when I attend the call, I hear the phone ringing and that contact gets a call from me. This is weird because, I used two sims in the same device and the problem still exists. I also tried formatting the phone and reinstalling iOS. I asked the service provider (Vodafone IN) customer care, but they are not sure what the problem is.
I read two functional requirements here:
When there are no agents available in CSQ1, simultaniously queue the call into CSQ2.
Allow internal employees to transfer calls to CSQ2 specifically.
For the first requirement you can just nest a second Select Resource step within the Queued condiiton of the first Select Resource step.
For the second just create a second trigger on the same application, use a Get Trigger Info step to understand which trigger was used. Use that with an If step and a Goto step to skip forward in the script to the nested Select Resource step of CSQ2 if the internal-only trigger was used.
Maybe you are looking for
-
2 questions for 1 part of my app
Hello there, I have a report and form in my APEX application, and right now the form adds entries into the report, which aggregates the data into 1 row if the name is the same. (terrible explanation but if you take a look at my app then maybe you wil
-
My iMac "locks up" when I try to burn a slideshow made in iMovie to a DVD
When attempting to burn a slideshow I created in iMovie to a DVD (after exporting to iDVD), the video portion encodes without incident, but when the audio starts to encode, my computer "locks up." That is, the burn "wheel" stops turning, and I get a
-
Updating or changing artwork when the library is on network storage
Hi, can someone help with this please? Previously i was using an imac with my itunes stuff on a usb hard disk plugged directly into the mac. If i wanted to change or add artwork i would do the usual caper of get info/artwork and drag something in,alw
-
Plz Help Meeeeeeeeeee!!!!!!! Sata Disappear
Ok i have 2 SATA SEAGATE BARRACUDA 8MB 120 GIGAS one was on array 1 and the other one on array 2 c: and d: respectively suddenly the 2nd one disappear it HAS ALL MY INFORMATION AND FILES !!!!!!!!!! EXTREMELY URGENT PLZ HELP MEEEEEEEEEEEE!!!! how
-
Apple Weather app temps way wrong
In Melbourne the apple weather app is often quite a few degrees off. The Yahoo! link takes me to weather.com which shows quite a discrepancy with Yahoo!'s own weather reading. Yahoo! is in line with the local Bureau of Meteorology. Today the temp is