Wuala Validating source files with md5sums... wuala.tar.gz . FAILED

[r-c@r-c-laptop wuala]$ makepkg -si
==> Making package: wuala 2-20110707 (Sat Oct 15 13:17:49 CEST 2011)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving Sources...
-> Downloading wuala.tar.gz...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 303k 100 303k 0 0 56284 0 0:00:05 0:00:05 --:--:-- 684k
-> Found 0001-fix-loader-location.patch
-> Found wuala.png
-> Found wuala.desktop
-> Found LICENSE
==> Validating source files with md5sums...
wuala.tar.gz ... FAILED
0001-fix-loader-location.patch ... Passed
wuala.png ... Passed
wuala.desktop ... Passed
LICENSE ... Passed
==> ERROR: One or more files did not pass the validity check!
I tryed to install it mannualy and also using yaourt. Nothing works.

What I need to change just checksums or something else? Which checskums to use?
I tryed copy and paste during installation but doesnt work:
http://pastebin.com/MceCxbD3
http://pastebin.com/ziQKuE5t

Similar Messages

Archive Source Files with Errors, Option Does not work

Any one tried "Archive Source Files with Errors" on the
sender adapter. It shows no effect.
1.We are on SP19.
2.Adapter type : FTP adapter.
Steps for the Reconstruction
1. Configure a sender FTP adapter.
2. choose the option "Archive Faulty source files"
3. Specify a directory for "Directory for archiving Files with Erroors"
4. Send a file which can cause File Content conversion errors.
Regards,
Raj

Hi,
FYI
I am in PI 7.0 SP 10. It works fine for me. Whenever you have any content conversion problem or module problem, it has created the same input file in specified directory.
In your case are u getting content conversion error in the Communication Channel ..just cross check it. If not try to get error over there and then test this feature
Rgds,
Moorthy

Archive Source Files with Errors

Hi All,
I need to archive my sending file in repective directory, if it has errors..
It is mentioned in library that A permanent error occurs either during the conversion of the file content, or in a module in the module processor.
What is permanent error?
For example if my input file name is abc.txt which containg 3 fields id,name,address.
i have configured sending file adapter with FCC .
now i have given some faulty entries in abc.txt like for example 4 fields separated by comma,
but this is a error.Asper FCC i have given only 3 fields..
so this error file has to archive in so and so folder.
If i check Archive Source Files with Errors parameter in sending file adapter.
and specified the specified directory.
but its not working for me. file is not picking but its not coming in the archive folder.
In library it is mentioned to see message transfer bean link.
there i found Transform.PermanentErrors: True/False.
If we have not used message transfer bean then, in that case will this parameter archive source files with errors will work for FCC?
Please suggest me .
I would really appreciate if anyone could send a complete blog for this how to archive source files with errors in FCC?
Thanks in Advance..
Regards,
Reehan

Reehan,
I am not sure if you are still stuck with your issue of archiving faulty source files but I came across the same issue. Please check your mode of processing. The faulty source files archiving feature will work good in ARCHIVE mode but not in test or delete mode. I haven't check for set for read-only mode.
Good luck!

Use of "Archive Source Files with Errors" for BIC module error

Hi All,
I have Edi file to Idoc scenario , where i am using SEEBURGER BICXIADAPTER.MODULE.
My question is if the input file caught in error with BIC Module e.g
"MP: exception caught with cause Error in BICMODULE-module:Temporary error: BIC XI Adapter call failed. Reason: SegmentDescription: checkAndResetChildrenCounter() not enough repetitions of the segment UNH found: 0 instead of 1 offset :80 DESCRIPTION: SegmentDescription Warning: Not enough repetitions of the segment UNH ([not specified]/[not specified])."
can we move these errornous files to another directory using Processing parameter "Archive Source Files with Errors" available with Sender File Adapter?
In File Adpater my Module tab looks like :
1 localejbs/CallBicXIRaBean Local Enterprise Bean bic
2 localejbs/CallSapAdapter Local Enterprise Bean 0
In my scenario , its not working.. do we have any other option to achive this?

Hi Jyoti,
I had a raised a similar case with SAP and came to know that archiving only works if the error raised by the module is so called "Permanent". However, bic doesn't raise permanent error due to which archiving of error files won't be possible. Seeburger haven't came up with a solution yet.
Regards,
Prateek

"Archive Source Files with Errors" feature - how to?

File sender adapter has a feature to Archive Source Files with Errors.
I have an adapter module applied to inbound files and in case an error occurs during the processing of the adapter module, I want to make use of this feature , this is because the CC keeps on picking the file with erroneous data after regular specified interval and shows up an error in RWB.
How can I use the Archive Source Files with Errors feature with this? Do I have to do anything specific in the adapter module code for this to work?
Regards,
Amol

Hi,
if you see whats mentioned on the help link
http://help.sap.com/saphelp_nw04/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/frameset.htm
it says:
To archive source files where a permanent error occurred during processing, set the indicator.
A permanent error occurs either during the conversion of the file content, or in a module in the module processor.
does this not mean it could be used with errors raised in adapter modules? ideally it should be.

Empty File valid source file

Could somebody help me to answer my question .
The question is an empty file a valid source code file?
Thanks for the help...
Elvira48

Yes.
CompilationUnit =
PackageStatement? ImportStatement* TypeDeclaration*
;All parts optional.
Pete

How to Archive Source Files with error in XI ?

Hi,
How to archive source files where a permanent error occurred duing processing? and how to set it?
Thank you in advance.
Yinglak

Hi,
What exactly u want to do.........If u want to Archive ur sender file then give Archive directory path and if u process the file with error data or success data it will store in Archive directory.
Archive Directory is used to store the sender files what ever data ur sending ........not for only error records.
Regards,
Phani
Reward points if Helpfull

Cannot compile source file with Ctrl-F7 in VS 2008

I have added an existing .cpp file to my project. When I want to compile
only one file, I usually press Ctrl-F7, but that does not work on this file (it works on some other source files). When I pull down the Build menu, the Compile option is missing, like it is when a header
(*.h) file is active.
When I right-click on the source file in the Solution Explorer, the context menu shows "Compile\tCtrl+F7"; I can compile a single source file that way, but Ctrl-F7 is so much easier and faster.
I have tried resetting the keyboard shortcut, resetting the profile to the original C/C++ profile, and closing and reopening Visual Studio, but nothing corrected the issue.
It feels like VS is not recognizing that my source file is a C++ file, despite its name (something.cpp). Why has this started happening, and how can I get the shortcut (and Build menu) to reset?

This happens in the following way. You manually create a new C++ class in an existing project using the editor in VC++. You then (with the editor still open) add the file to your project. Visual Studio finds your class info
and adds it intellisense, making it seem as though VC++ knows your file is in the project. However, it does not and ctrl f7 will therefore not work. Removing and adding the file does not help...unless you close the editor window...in which
case VC++ will correctly add the file if you remove and add it to your project.
This is not an uncommon way to create a new class - one does not always use the VC++ create class option. The manual creation method may be preferable if you are not using automated features from VC++ and instead want to copy some code
from another file, headers for example. My view is that this is a VC++ bug that should be repaired; apparently VC++ thinks the file is already included if it is open in the editor rather than checking its file list. But it is easy
to work around once you know what is happening.

File Adapter - Archive Source Files with Errors.

Hi All,
Could you kindly give the steps as to how to configure sender File Adapter to archive source file which result in error ?.
Cheers,
Kushi

Hi Kushi,
To configure Sender File Adapter what you can do is:
1. Create one Communication and select the adapter as File.
2. Select the radio button Sender.
3. Enter the source directory e.g. /temp
4.Enter File name e.g. xi_test.xml
5. Under Processing parameters Chose the processing mode as "Archive" from
drop down box.
6. Enter the path where you wnant to archive your file.
7. Do not forget to enter the poll intervells. e.g. 60 & Quailty of service "Exactly Once".
8. Enter file type "Binary" if your source file is XML.
9. Check if Adapter status as "Active".
Note: Archiving the file is regardless of erorr in file.
It will archive all the source file.
Regards,
Sarvesh
****Reward Points, if found helpfull.

Can't Save Source File with QT PRO?!

Hi there,
I use to always be able to download a QT movie by saving the source file to my desktop. I have QT Pro but for some reason it is telling me to purchase it??
Anyone can help me I'll be greatly appreciate.
Thank you.

Try the Perian component:
http://perian.org/#download
Its free.

Source files with dynamic name

Hi,
Is there a way to load from a variable file name sources, for example file name with date postfix, something like this: INPUT_DEPT_20070313.txt ??
Or i must create an external process in the process flow wich is to rename the file every time to a fix name then load ??
Thanks.

Correct. If you are using SQL*Loader mapping, then put a transformation before the mapping in your process flow. If you are using external tables (PL/SQL mapping), then put a premapping procedure in the mapping. And yes, use UTL_FILE package to rename the file.
Greetings,
Mate

Problem validating XML file with external schema file

Hi All
I am having trouble at the moment trying to validate an xml file using an external xsd file that sits on my server. I have followed the basic option but at the moment to no avail. I am using a DOMParser and am setting all the features and properties correctly ... well I think I am anyway.....below is a fragment of the code
DOMParser parser = new DOMParser ();
// Setting the validation on for the parser.
parser.setFeature ( "http://xml.org/sax/features/validation", true );
parser.setFeature ( "http://apache.org/xml/features/validation/schema", true);
parser.setProperty ( "http://apache.org/xml/properties/schema/externalnoNamespaceSchemaLocation", "c://testing.xsd" );
parser.setErrorHandler ( this );
I am getting an error telling me that the root element cannot be found.....see below
org.xml.sax.SAXParseException: cvc-elt.1: Cannot find the declaration of element 'mainhome'.
at org.apache.xerces.util.ErrorHandlerWrapper.createSAXParseException(Unknown Source)
at org.apache.xerces.util.ErrorHandlerWrapper.error(Unknown Source)
at org.apache.xerces.impl.XMLErrorReporter.reportError(Unknown Source)
at org.apache.xerces.impl.XMLErrorReporter.reportError(Unknown Source)
at org.apache.xerces.impl.xs.XMLSchemaValidator.handleStartElement(Unknown Source)
at org.apache.xerces.impl.xs.XMLSchemaValidator.startElement(Unknown Source)
at org.apache.xerces.impl.XMLNamespaceBinder.handleStartElement(Unknown Source)
at org.apache.xerces.impl.XMLNamespaceBinder.startElement(Unknown Source)
at org.apache.xerces.impl.dtd.XMLDTDValidator.startElement(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanStartElement(Unknown Source)
at org.apache.xerces.impl.XMLDocumentScannerImpl$ContentDispatcher.scanRootElementHook(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
at org.apache.xerces.parsers.DTDConfiguration.parse(Unknown Source)
at org.apache.xerces.parsers.DTDConfiguration.parse(Unknown Source)
at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
at org.apache.xerces.parsers.DOMParser.parse(Unknown Source)
at com.cibenix.aps.util.MenuXMLParser.process(MenuXMLParser.java:163)
at com.cibenix.aps.actions.MenuAddAction.execute(MenuAddAction.java:80)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:256)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2417)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:171)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:172)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:193)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:781)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:549)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:589)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:666)
Any help would be greatly appreciated
thanks

In the schema root element xs:schema add namespace declaration.
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema">
In the XML document root element add xmlns:xsi and xsi:noNamespaceSchemaLocation attributes.
<root_element xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="file://c:/testing.xsd">

Archive Source Files with Errors is Missing

Hi
I don't have this option or "Handling of Empty Files" available in ID on my Live or QA Servers although I do have on my Dev. They are all on the same SP and Patch Level 7.0 SP 14. Any suggestions ?
Thanks

Hi Thanks for the replies .. I found out there was a difference between the CIM Model between the environments, which has been now levelled. Folloing this I refreshed the CPA cache and I reimported the SAP BASIS 7.00 component but no joy. In the IR If I right click on the SAP BASIS BASIS package on my dev environment -> Display Support Package It displays SPS 9 and SPS 10. If I do the same on my QA env then it displays only SPS 9. This is surley where the issue is but I do not know how to rectify. Any ideas ?, is this because the CR content ?, (CIM Model, CR Content and XI Content are a little unclear to me). Is it an idea to do an export and import from my Dev to QA environment ?.
Thanks in Advance
Damien !

[SOLVED] [makepkg] attempts to process source files multiple times

OK, so I decided I was going to update the PKGBUILD for linux-lts-tresor to the new format with separate sources for different architectures and PGP keys, having successfully done it for the nvidia packages I maintain and I get the following issue when I run mkaurball on the linux-lts-tresor PKGBUILD:
claire ~/Builds/linux-lts-tresor % mkaurball
==> Making package: linux-lts-tresor 3.14.28-1 (Fri 9 Jan 10:51:06 GMT 2015)
==> Retrieving sources...
-> Found linux-3.14.tar.xz
-> Found linux-3.14.tar.sign
-> Found patch-3.14.28.xz
-> Found patch-3.14.28.sign
-> Found config
-> Found config.x86_64
-> Found linux-lts-tresor.preset
-> Found linux-lts-tresor.install
-> Found change-default-console-loglevel.patch
-> Found 0001-Bluetooth-allocate-static-minor-for-vhci.patch
-> Found 0002-module-allow-multiple-calls-to-MODULE_DEVICE_TABLE-p.patch
-> Found 0003-module-remove-MODULE_GENERIC_TABLE.patch
-> Found 0006-genksyms-fix-typeof-handling.patch
-> Found tresor_sysfs.c
-> Found tresor-patch-3.6.2_i686
-> Found tresor-patch-3.6.2_i686.patch
-> Found tresor-patch-3.6.2_i686.patch.sig
-> Found patch-3.14.28.sign
-> Found config
-> Found config.x86_64
-> Found linux-lts-tresor.preset
-> Found linux-lts-tresor.install
-> Found change-default-console-loglevel.patch
-> Found 0001-Bluetooth-allocate-static-minor-for-vhci.patch
-> Found 0002-module-allow-multiple-calls-to-MODULE_DEVICE_TABLE-p.patch
-> Found 0003-module-remove-MODULE_GENERIC_TABLE.patch
-> Found 0006-genksyms-fix-typeof-handling.patch
-> Found tresor_sysfs.c
-> Found tresor-patch-3.8.2_aesni
-> Found tresor-patch-3.8.2_aesni.patch
-> Found tresor-patch-3.8.2_aesni.patch.sig
-> Found patch-3.14.28.sign
-> Found config
-> Found config.x86_64
-> Found linux-lts-tresor.preset
-> Found linux-lts-tresor.install
-> Found change-default-console-loglevel.patch
-> Found 0001-Bluetooth-allocate-static-minor-for-vhci.patch
-> Found 0002-module-allow-multiple-calls-to-MODULE_DEVICE_TABLE-p.patch
-> Found 0003-module-remove-MODULE_GENERIC_TABLE.patch
-> Found 0006-genksyms-fix-typeof-handling.patch
-> Found tresor_sysfs.c
==> Validating source files with sha256sums...
linux-3.14.tar.xz ... Passed
linux-3.14.tar.sign ... Skipped
patch-3.14.28.xz ... Passed
patch-3.14.28.sign ... Skipped
config ... Passed
config.x86_64 ... Passed
linux-lts-tresor.preset ... Passed
linux-lts-tresor.install ... Passed
change-default-console-loglevel.patch ... Passed
0001-Bluetooth-allocate-static-minor-for-vhci.patch ... Passed
0002-module-allow-multiple-calls-to-MODULE_DEVICE_TABLE-p.patch ... Passed
0003-module-remove-MODULE_GENERIC_TABLE.patch ... Passed
0006-genksyms-fix-typeof-handling.patch ... Passed
tresor_sysfs.c ... Passed
==> Validating source files with sha256sums...
tresor-patch-3.6.2_i686 ... Passed
tresor-patch-3.6.2_i686.patch ... Passed
tresor-patch-3.6.2_i686.patch.sig ... Skipped
==> Validating source files with sha256sums...
tresor-patch-3.8.2_aesni ... Passed
tresor-patch-3.8.2_aesni.patch ... Passed
tresor-patch-3.8.2_aesni.patch.sig ... Skipped
==> Verifying source file signatures with gpg...
linux-3.14.tar ... Passed
patch-3.14.28 ... Passed
tresor-patch-3.6.2_i686.patch ... Passed
patch-3.14.28 ... Passed
tresor-patch-3.8.2_aesni.patch ... Passed
patch-3.14.28 ... Passed
==> Entering fakeroot environment...
==> Creating source package...
-> Adding PKGBUILD...
-> Generating .SRCINFO file...
-> Adding config...
-> Adding config.x86_64...
-> Adding linux-lts-tresor.preset...
-> Adding linux-lts-tresor.install...
-> Adding change-default-console-loglevel.patch...
-> Adding 0001-Bluetooth-allocate-static-minor-for-vhci.patch...
-> Adding 0002-module-allow-multiple-calls-to-MODULE_DEVICE_TABLE-p.patch...
-> Adding 0003-module-remove-MODULE_GENERIC_TABLE.patch...
-> Adding 0006-genksyms-fix-typeof-handling.patch...
-> Adding tresor-patch-3.6.2_i686.patch...
-> Adding tresor-patch-3.6.2_i686.patch.sig...
-> Adding config...
ln: failed to create symbolic link ‘/home/claire/Builds/linux-lts-tresor/srclinks.Qb2SC9gzL/linux-lts-tresor/config’: File exists
-> Adding config.x86_64...
ln: failed to create symbolic link ‘/home/claire/Builds/linux-lts-tresor/srclinks.Qb2SC9gzL/linux-lts-tresor/config.x86_64’: File exists
-> Adding linux-lts-tresor.preset...
ln: failed to create symbolic link ‘/home/claire/Builds/linux-lts-tresor/srclinks.Qb2SC9gzL/linux-lts-tresor/linux-lts-tresor.preset’: File exists
-> Adding linux-lts-tresor.install...
ln: failed to create symbolic link ‘/home/claire/Builds/linux-lts-tresor/srclinks.Qb2SC9gzL/linux-lts-tresor/linux-lts-tresor.install’: File exists
-> Adding change-default-console-loglevel.patch...
ln: failed to create symbolic link ‘/home/claire/Builds/linux-lts-tresor/srclinks.Qb2SC9gzL/linux-lts-tresor/change-default-console-loglevel.patch’: File exists
-> Adding 0001-Bluetooth-allocate-static-minor-for-vhci.patch...
ln: failed to create symbolic link ‘/home/claire/Builds/linux-lts-tresor/srclinks.Qb2SC9gzL/linux-lts-tresor/0001-Bluetooth-allocate-static-minor-for-vhci.patch’: File exists
-> Adding 0002-module-allow-multiple-calls-to-MODULE_DEVICE_TABLE-p.patch...
ln: failed to create symbolic link ‘/home/claire/Builds/linux-lts-tresor/srclinks.Qb2SC9gzL/linux-lts-tresor/0002-module-allow-multiple-calls-to-MODULE_DEVICE_TABLE-p.patch’: File exists
-> Adding 0003-module-remove-MODULE_GENERIC_TABLE.patch...
ln: failed to create symbolic link ‘/home/claire/Builds/linux-lts-tresor/srclinks.Qb2SC9gzL/linux-lts-tresor/0003-module-remove-MODULE_GENERIC_TABLE.patch’: File exists
-> Adding 0006-genksyms-fix-typeof-handling.patch...
ln: failed to create symbolic link ‘/home/claire/Builds/linux-lts-tresor/srclinks.Qb2SC9gzL/linux-lts-tresor/0006-genksyms-fix-typeof-handling.patch’: File exists
-> Adding tresor-patch-3.8.2_aesni.patch...
-> Adding tresor-patch-3.8.2_aesni.patch.sig...
-> Adding config...
ln: failed to create symbolic link ‘/home/claire/Builds/linux-lts-tresor/srclinks.Qb2SC9gzL/linux-lts-tresor/config’: File exists
-> Adding config.x86_64...
ln: failed to create symbolic link ‘/home/claire/Builds/linux-lts-tresor/srclinks.Qb2SC9gzL/linux-lts-tresor/config.x86_64’: File exists
-> Adding linux-lts-tresor.preset...
ln: failed to create symbolic link ‘/home/claire/Builds/linux-lts-tresor/srclinks.Qb2SC9gzL/linux-lts-tresor/linux-lts-tresor.preset’: File exists
-> Adding linux-lts-tresor.install...
ln: failed to create symbolic link ‘/home/claire/Builds/linux-lts-tresor/srclinks.Qb2SC9gzL/linux-lts-tresor/linux-lts-tresor.install’: File exists
-> Adding change-default-console-loglevel.patch...
ln: failed to create symbolic link ‘/home/claire/Builds/linux-lts-tresor/srclinks.Qb2SC9gzL/linux-lts-tresor/change-default-console-loglevel.patch’: File exists
-> Adding 0001-Bluetooth-allocate-static-minor-for-vhci.patch...
ln: failed to create symbolic link ‘/home/claire/Builds/linux-lts-tresor/srclinks.Qb2SC9gzL/linux-lts-tresor/0001-Bluetooth-allocate-static-minor-for-vhci.patch’: File exists
-> Adding 0002-module-allow-multiple-calls-to-MODULE_DEVICE_TABLE-p.patch...
ln: failed to create symbolic link ‘/home/claire/Builds/linux-lts-tresor/srclinks.Qb2SC9gzL/linux-lts-tresor/0002-module-allow-multiple-calls-to-MODULE_DEVICE_TABLE-p.patch’: File exists
-> Adding 0003-module-remove-MODULE_GENERIC_TABLE.patch...
ln: failed to create symbolic link ‘/home/claire/Builds/linux-lts-tresor/srclinks.Qb2SC9gzL/linux-lts-tresor/0003-module-remove-MODULE_GENERIC_TABLE.patch’: File exists
-> Adding 0006-genksyms-fix-typeof-handling.patch...
ln: failed to create symbolic link ‘/home/claire/Builds/linux-lts-tresor/srclinks.Qb2SC9gzL/linux-lts-tresor/0006-genksyms-fix-typeof-handling.patch’: File exists
-> Compressing source package...
==> Leaving fakeroot environment.
==> Source package created: linux-lts-tresor (Fri 9 Jan 10:51:25 GMT 2015)
Here is the PKGBUILD:
# Maintainers:
# Claire Farron <[email protected]>
# Andes Ho <[email protected]> (Secondary Package Tester)
# Former Maintainer(s)
# Ido Rosen <[email protected]>
# xerc <aur[at]xerc.de>
# Contributor: tresor-patch-3.6.2_i686.patch and consolidation of patches
# Seth Dickson <[email protected]>
# Contributor(s) of the linux PKGBUILD
# Tobias Powalowski <[email protected]>
# Thomas Baechler <[email protected]>
### Do not edit below this line unless you know what you're doing
pkgbase=linux-lts-tresor # Build stock -lts kernel with TRESOR patches
#pkgbase=linux-custom # Build kernel with a different name
_srcname=linux-3.14
pkgname=linux-lts-tresor # placeholder
pkgdesc="Linux longterm stable kernel and modules with integrated TRESOR"
pkgver=3.14.28
pkgrel=1
arch=('i686' 'x86_64')
url="http://www1.informatik.uni-erlangen.de/tresor"
license=('GPL2')
makedepends=('xmlto' 'docbook-xsl' 'kmod' 'inetutils' 'bc')
options=('!strip')
source=("https://www.kernel.org/pub/linux/kernel/v3.x/${_srcname}.tar.xz"
"https://www.kernel.org/pub/linux/kernel/v3.x/${_srcname}.tar.sign"
"https://www.kernel.org/pub/linux/kernel/v3.x/patch-${pkgver}.xz"
"https://www.kernel.org/pub/linux/kernel/v3.x/patch-${pkgver}.sign"
# the main kernel config files
'config' 'config.x86_64'
# standard config files for mkinitcpio ramdisk
"${pkgbase}.preset"
"${pkgbase}.install"
'change-default-console-loglevel.patch'
'0001-Bluetooth-allocate-static-minor-for-vhci.patch'
'0002-module-allow-multiple-calls-to-MODULE_DEVICE_TABLE-p.patch'
'0003-module-remove-MODULE_GENERIC_TABLE.patch'
'0006-genksyms-fix-typeof-handling.patch'
'http://www1.informatik.uni-erlangen.de/filepool/projects/tresor/tresor_sysfs.c')
source_i686+=("http://www1.informatik.uni-erlangen.de/filepool/projects/tresor/tresor-patch-3.6.2_i686"
'tresor-patch-3.6.2_i686.patch'
'tresor-patch-3.6.2_i686.patch.sig')
source_x86_64+=("http://www1.informatik.uni-erlangen.de/filepool/projects/tresor/tresor-patch-3.8.2_aesni"
'tresor-patch-3.8.2_aesni.patch'
'tresor-patch-3.8.2_aesni.patch.sig')
sha256sums=('61558aa490855f42b6340d1a1596be47454909629327c49a5e4e10268065dffa'
'SKIP'
'e3c79a30ac959c84c329be5461da88a5c79c6463da30d376c27bb103aee79b51'
'SKIP'
'6291d78969d8db94525d9614fa15c6a5db97b070af50d84f68d32ecd5f40fd69'
'145a66ef4f702ed516a57d846dd00b5acac7b5cc1eff86d1e7ee6bd5a66040b2'
'003b45593f1b5cdb81ea2da6ab67deef04402eb15aae231921ff55f65948fbdd'
'edb6d4ed9ca2af1ffc15ddbf195152c219e77bd12da3ea176c5c24afc0a779d4'
'faced4eb4c47c4eb1a9ee8a5bf8a7c4b49d6b4d78efbe426e410730e6267d182'
'6d72e14552df59e6310f16c176806c408355951724cd5b48a47bf01591b8be02'
'52dec83a8805a8642d74d764494acda863e0aa23e3d249e80d4b457e20a3fd29'
'65d58f63215ee3c5f9c4fc6bce36fc5311a6c7dbdbe1ad29de40647b47ff9c0d'
'cf2e7a2d00787f754028e7459688c2755a406e632ce48b60952fa4ff7ed6f4b7'
'd6fcbd0ea7a5a4c42d326286b60bbd5b1d476b8a6752046fa28133e05351c1fe')
sha256sums_i686=('9a286a85c16ca5b6a02419af1aedbfe6e8b89bcabdcb32670ead3f26c09eadfd'
'2fb8c26e237883f39de57a264873b21bcdfc5b6b0c1e7c60cec8d141e5db33ba'
'SKIP')
sha256sums_x86_64=('54009b369b95a77ab13f6dd7cdbe22b0785b6314cae3a6c39190b48f4c4b12ce'
'6d0580f05db9cf47dd097326c2f3c0e493854493544d32692ab63290e12fc3e1'
'SKIP')
validpgpkeys=(
'ABAF11C65A2970B130ABE3C479BE3E4300411886' # Linux Torvalds
'647F28654894E3BD457199BE38DBBDC86092693E' # Greg Kroah-Hartman
'5F885602C7FD0951F565E27949F67298E6366A92' # Claire Farron
[[ "$CARCH" = "i686" ]] && _tresorpatch="tresor-patch-3.6.2_i686"
[[ "$CARCH" = "x86_64" ]] && _tresorpatch="tresor-patch-3.8.2_aesni"
_kernelname=${pkgbase#linux}
prepare() {
cd "${srcdir}/${_srcname}"
# add upstream patch
patch -p1 -i "${srcdir}/patch-${pkgver}"
# add latest fixes from stable queue, if needed
# http://git.kernel.org/?p=linux/kernel/git/stable/stable-queue.git
# set DEFAULT_CONSOLE_LOGLEVEL to 4 (same value as the 'quiet' kernel param)
# remove this when a Kconfig knob is made available by upstream
# (relevant patch sent upstream: https://lkml.org/lkml/2011/7/26/227)
patch -p1 -i "${srcdir}/change-default-console-loglevel.patch"
# Fix vhci warning in kmod (to restore every kernel maintainer's sanity)
msg "Patching source to fix vhci warning in kmod"
patch -p1 -i "${srcdir}/0001-Bluetooth-allocate-static-minor-for-vhci.patch"
# Fix atkbd aliases
msg "Patching source to fix atkbd aliases"
patch -p1 -i "${srcdir}/0002-module-allow-multiple-calls-to-MODULE_DEVICE_TABLE-p.patch"
patch -p1 -i "${srcdir}/0003-module-remove-MODULE_GENERIC_TABLE.patch"
# Fix generation of symbol CRCs
# http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=dc53324060f324e8af6867f57bf4891c13c6ef18
msg "Patching source to fix generation of symbol CRCs"
patch -p1 -i "${srcdir}/0006-genksyms-fix-typeof-handling.patch"
# TRESOR Runs Encryption Securely Outside RAM
# i.e. the purpose of this package :-)
msg "Patching TRESOR for linux"
# Initialized the patched TRESOR file with the upstream patch.
cp "${srcdir}/${_tresorpatch}" "${_tresorpatch}.patched"
patch --follow-symlinks "${_tresorpatch}.patched" "${srcdir}/${_tresorpatch}.patch"
msg "Patching source with TRESOR"
patch -p1 -i "${_tresorpatch}.patched"
if [ "${CARCH}" = "x86_64" ]; then
cat "${srcdir}/config.x86_64" > ./.config
else
cat "${srcdir}/config" > ./.config
fi
if [ "${_kernelname}" != "" ]; then
sed -i "s|CONFIG_LOCALVERSION=.*|CONFIG_LOCALVERSION=\"${_kernelname}\"|g" ./.config
sed -i "s|CONFIG_LOCALVERSION_AUTO=.*|CONFIG_LOCALVERSION_AUTO=n|" ./.config
fi
# set extraversion to pkgrel
sed -ri "s|^(EXTRAVERSION =).*|\1 -${pkgrel}|" Makefile
# don't run depmod on 'make install'. We'll do this ourselves in packaging
sed -i '2iexit 0' scripts/depmod.sh
cd "${srcdir}"
cc tresor_sysfs.c -o tresor_sysfs
cd "${srcdir}/${_srcname}"
# get kernel version
make prepare
# load configuration
# Configure the kernel. Replace the line below with one of your choice.
#make menuconfig # CLI menu for configuration
#make nconfig # new CLI menu for configuration
#make xconfig # X-based configuration
#make oldconfig # using old config from previous kernel version
# ... or manually edit .config
# rewrite configuration
#yes "" | make config >/dev/null
make oldconfig
# save configuration for later reuse
# if [ "${CARCH}" = "x86_64" ]; then
# cat .config > "${startdir}/config.x86_64.last"
# else
# cat .config > "${startdir}/config.last"
# fi
build() {
cd "${srcdir}/${_srcname}"
make ${MAKEFLAGS} LOCALVERSION= bzImage modules
_package() {
true && pkgdesc="The ${pkgbase/linux/Linux} kernel and modules - stable longtime supported with integrated TRESOR"
depends=('coreutils' 'linux-firmware' 'kmod' 'mkinitcpio>=0.7')
optdepends=('crda: to set the correct wireless channels of your country')
provides=("kernel26${_kernelname}=${pkgver}")
conflicts=("kernel26${_kernelname}")
replaces=("kernel26${_kernelname}")
backup=("etc/mkinitcpio.d/${pkgbase}.preset")
install=${pkgbase}.install
# TRESOR sysfs utility - not necessary but nice to have, in case someone
# enables CONFIG_TRESOR_SYSFS in a fork of this PKGBUILD...
cd "${srcdir}"
install -D -m755 tresor_sysfs "${pkgdir}/usr/bin/tresor_sysfs"
cd "${srcdir}/${_srcname}"
KARCH=x86
# get kernel version
_kernver="$(make LOCALVERSION= kernelrelease)"
_basekernel=${_kernver%%-*}
_basekernel=${_basekernel%.*}
mkdir -p "${pkgdir}"/{lib/modules,lib/firmware,boot}
make LOCALVERSION= INSTALL_MOD_PATH="${pkgdir}" modules_install
cp arch/$KARCH/boot/bzImage "${pkgdir}/boot/vmlinuz-${pkgbase}"
# set correct depmod command for install
cp -f "${startdir}/${install}" "${startdir}/${install}.pkg"
true && install=${install}.pkg
sed \
-e "s/KERNEL_NAME=.*/KERNEL_NAME=${_kernelname}/" \
-e "s/KERNEL_VERSION=.*/KERNEL_VERSION=${_kernver}/" \
-i "${startdir}/${install}"
# install mkinitcpio preset file for kernel
install -D -m644 "${srcdir}/${pkgbase}.preset" \
"${pkgdir}/etc/mkinitcpio.d/${pkgbase}.preset"
sed \
-e "1s|'linux.*'|'${pkgbase}'|" \
-e "s|ALL_kver=.*|ALL_kver=\"/boot/vmlinuz-${pkgbase}\"|" \
-e "s|default_image=.*|default_image=\"/boot/initramfs-${pkgbase}.img\"|" \
-e "s|fallback_image=.*|fallback_image=\"/boot/initramfs-${pkgbase}-fallback.img\"|" \
-i "${pkgdir}/etc/mkinitcpio.d/${pkgbase}.preset"
# remove build and source links
rm -f "${pkgdir}"/lib/modules/${_kernver}/{source,build}
# remove the firmware
rm -rf "${pkgdir}/lib/firmware"
# gzip -9 all modules to save 100MB of space
find "${pkgdir}" -name '*.ko' -exec gzip -9 {} \;
# make room for external modules
ln -s "../extramodules-${_basekernel}${_kernelname:--ARCH}" \
"${pkgdir}/lib/modules/${_kernver}/extramodules"
# add real version for building modules and running depmod from post_install/upgrade
mkdir -p "${pkgdir}/lib/modules/extramodules-${_basekernel}${_kernelname:--ARCH}"
echo "${_kernver}" > \
"${pkgdir}/lib/modules/extramodules-${_basekernel}${_kernelname:--ARCH}/version"
# Now we call depmod...
depmod -b "${pkgdir}" -F System.map "${_kernver}"
# move module tree /lib -> /usr/lib
mkdir -p "${pkgdir}/usr"
mv "${pkgdir}/lib" "${pkgdir}/usr/"
# add vmlinux
install -D -m644 vmlinux "${pkgdir}/usr/lib/modules/${_kernver}/build/vmlinux"
_package-headers() {
true && pkgdesc="Header files and scripts for building modules for ${pkgbase/linux/Linux} kernel"
provides=("kernel26${_kernelname}-headers=${pkgver}")
conflicts=("kernel26${_kernelname}-headers")
replaces=("kernel26${_kernelname}-headers")
install -dm755 "${pkgdir}/usr/lib/modules/${_kernver}"
cd "${srcdir}/${_srcname}"
install -D -m644 Makefile \
"${pkgdir}/usr/lib/modules/${_kernver}/build/Makefile"
install -D -m644 kernel/Makefile \
"${pkgdir}/usr/lib/modules/${_kernver}/build/kernel/Makefile"
install -D -m644 .config \
"${pkgdir}/usr/lib/modules/${_kernver}/build/.config"
mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/include"
for i in acpi asm-generic config crypto drm generated keys linux math-emu \
media net pcmcia scsi sound trace uapi video xen; do
cp -a include/${i} "${pkgdir}/usr/lib/modules/${_kernver}/build/include/"
done
# copy arch includes for external modules
mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/x86"
cp -a arch/x86/include "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/x86/"
# copy files necessary for later builds, like nvidia and vmware
cp Module.symvers "${pkgdir}/usr/lib/modules/${_kernver}/build"
cp -a scripts "${pkgdir}/usr/lib/modules/${_kernver}/build"
# fix permissions on scripts dir
chmod og-w -R "${pkgdir}/usr/lib/modules/${_kernver}/build/scripts"
mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/.tmp_versions"
mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/kernel"
cp arch/${KARCH}/Makefile "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/"
if [ "${CARCH}" = "i686" ]; then
cp arch/${KARCH}/Makefile_32.cpu \
"${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/"
fi
cp arch/${KARCH}/kernel/asm-offsets.s \
"${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/kernel/"
# add docbook makefile
install -D -m644 Documentation/DocBook/Makefile \
"${pkgdir}/usr/lib/modules/${_kernver}/build/Documentation/DocBook/Makefile"
# add dm headers
mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/md"
cp drivers/md/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/md"
# add inotify.h
mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/include/linux"
cp include/linux/inotify.h "${pkgdir}/usr/lib/modules/${_kernver}/build/include/linux/"
# add wireless headers
mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/net/mac80211/"
cp net/mac80211/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/net/mac80211/"
# add dvb headers for external modules
# in reference to:
# http://bugs.archlinux.org/task/9912
mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-core"
cp drivers/media/dvb-core/*.h \
"${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-core/"
# and...
# http://bugs.archlinux.org/task/11194
mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/include/config/dvb/"
cp include/config/dvb/*.h \
"${pkgdir}/usr/lib/modules/${_kernver}/build/include/config/dvb/"
# add dvb headers for http://mcentral.de/hg/~mrec/em28xx-new
# in reference to:
# http://bugs.archlinux.org/task/13146
mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-frontends/"
cp drivers/media/dvb-frontends/lgdt330x.h \
"${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-frontends/"
mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/i2c/"
cp drivers/media/i2c/msp3400-driver.h \
"${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/i2c/"
# add dvb headers
# in reference to:
# http://bugs.archlinux.org/task/20402
mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/usb/dvb-usb"
cp drivers/media/usb/dvb-usb/*.h \
"${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/usb/dvb-usb/"
mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-frontends"
cp drivers/media/dvb-frontends/*.h \
"${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-frontends/"
mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/tuners"
cp drivers/media/tuners/*.h \
"${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/tuners/"
# add xfs and shmem for aufs building
mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/fs/xfs"
mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/mm"
cp fs/xfs/xfs_sb.h "${pkgdir}/usr/lib/modules/${_kernver}/build/fs/xfs/xfs_sb.h"
# copy in Kconfig files
for i in $(find . -name "Kconfig*"); do
mkdir -p "${pkgdir}"/usr/lib/modules/${_kernver}/build/`echo ${i} | sed 's|/Kconfig.*||'`
cp ${i} "${pkgdir}/usr/lib/modules/${_kernver}/build/${i}"
done
chown -R root.root "${pkgdir}/usr/lib/modules/${_kernver}/build"
find "${pkgdir}/usr/lib/modules/${_kernver}/build" -type d -exec chmod 755 {} \;
# strip scripts directory
find "${pkgdir}/usr/lib/modules/${_kernver}/build/scripts" -type f -perm -u+w 2>/dev/null | while read binary ; do
case "$(file -bi "${binary}")" in
*application/x-sharedlib*) # Libraries (.so)
/usr/bin/strip ${STRIP_SHARED} "${binary}";;
*application/x-archive*) # Libraries (.a)
/usr/bin/strip ${STRIP_STATIC} "${binary}";;
*application/x-executable*) # Binaries
/usr/bin/strip ${STRIP_BINARIES} "${binary}";;
esac
done
# remove unneeded architectures
rm -rf "${pkgdir}"/usr/lib/modules/${_kernver}/build/arch/{alpha,arc,arm,arm26,arm64,avr32,blackfin,c6x,cris,frv,h8300,hexagon,ia64,m32r,m68k,m68knommu,metag,mips,microblaze,mn10300,openrisc,parisc,powerpc,ppc,s390,score,sh,sh64,sparc,sparc64,tile,unicore32,um,v850,xtensa}
_package-docs() {
true && pkgdesc="Kernel hackers manual - HTML documentation that comes with the ${pkgbase/linux/Linux} kernel"
provides=("kernel26${_kernelname}-docs=${pkgver}")
conflicts=("kernel26${_kernelname}-docs")
replaces=("kernel26${_kernelname}-docs")
cd "${srcdir}/${_srcname}"
mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build"
cp -al Documentation "${pkgdir}/usr/lib/modules/${_kernver}/build"
find "${pkgdir}" -type f -exec chmod 444 {} \;
find "${pkgdir}" -type d -exec chmod 755 {} \;
# remove a file already in linux package
rm -f "${pkgdir}/usr/lib/modules/${_kernver}/build/Documentation/DocBook/Makefile"
# true && is a workaround for AUR problem with split packages:
true && pkgname=("${pkgbase}" "${pkgbase}-headers" "${pkgbase}-docs")
for _p in ${pkgname[@]}; do
eval "package_${_p}() {
_package${_p#${pkgbase}}
done
EDIT: Here is the resulting source tarball for mkaurball.
Last edited by clfarron4 (2015-01-12 09:37:11)

OK, so either I'm committing a huge stupid with both TRESOR packages or there is actually a problem with makepkg. I've done similar changes with the linux-tresor PKGBUILD and it's doing the same thing.
PKGBUILD:
# Maintainers:
# Claire Farron <[email protected]>
# Andes Ho <[email protected]> (Secondary Package Tester)
# Former Maintainer(s)
# Ido Rosen <[email protected]>
# xerc <aur[at]xerc.de>
# Contributor(s) of tresor-patch-3.6.2_i686.patch and consolidation of patches
# Seth Dickson <[email protected]>
# Contributor(s) of the linux PKGBUILD
# Tobias Powalowski <[email protected]>
# Thomas Baechler <[email protected]>
### Do not edit below this line unless you know what you're doing
pkgbase=linux-tresor # Build stock kernel with TRESOR patches
#pkgbase=linux-custom # Build kernel with a different name
_srcname=linux-3.18
pkgver=3.18.2
pkgrel=1
arch=('i686' 'x86_64')
url="http://www1.informatik.uni-erlangen.de/tresor"
license=('GPL2')
makedepends=('xmlto' 'docbook-xsl' 'kmod' 'inetutils' 'bc')
options=('!strip')
source=("https://www.kernel.org/pub/linux/kernel/v3.x/${_srcname}.tar.xz"
"https://www.kernel.org/pub/linux/kernel/v3.x/${_srcname}.tar.sign"
"https://www.kernel.org/pub/linux/kernel/v3.x/patch-${pkgver}.xz"
"https://www.kernel.org/pub/linux/kernel/v3.x/patch-${pkgver}.sign"
# the main kernel config files
'config' 'config.x86_64'
# standard config files for mkinitcpio ramdisk
"${pkgbase}.preset"
"${pkgbase}.install"
'change-default-console-loglevel.patch'
'http://www1.informatik.uni-erlangen.de/filepool/projects/tresor/tresor_sysfs.c')
source_i686+=("http://www1.informatik.uni-erlangen.de/filepool/projects/tresor/tresor-patch-3.6.2_i686"
'tresor-patch-3.6.2_i686.patch'
'tresor-patch-3.6.2_i686.patch.sig')
source_x86_64+=("http://www1.informatik.uni-erlangen.de/filepool/projects/tresor/tresor-patch-3.8.2_aesni"
'tresor-patch-3.8.2_aesni.patch'
'tresor-patch-3.8.2_aesni.patch.sig')
sha256sums=('becc413cc9e6d7f5cc52a3ce66d65c3725bc1d1cc1001f4ce6c32b69eb188cbd'
'SKIP'
'927a30c152a193d22242de21b99c9765fb0086b0aa3fabd31938ffc6e1b3f37c'
'SKIP'
'b0f867da9c07d778014c52afe2df59b86122b0d4de2ea8003303855a0750e90d'
'b76fa6691c4ab19d11e346112e8c021c88578950ed19468f115905e74cb0495e'
'e17c0209dcb887173adbb4cc69fe0799b01ed9b9b7c487d1d023daa99ee073e1'
'390c0b348c0f42ba760587e9df3098c62a3b6bd5d522eefb51c7a18f29069751'
'1256b241cd477b265a3c2d64bdc19ffe3c9bbcee82ea3994c590c2c76e767d99'
'd6fcbd0ea7a5a4c42d326286b60bbd5b1d476b8a6752046fa28133e05351c1fe')
sha256sums_i686=('9a286a85c16ca5b6a02419af1aedbfe6e8b89bcabdcb32670ead3f26c09eadfd'
'800f592847d2a20679630491b8f657cb912abc65f9f2daecf804b6dc2f3b9352'
'SKIP')
sha256sums_x86_64=('54009b369b95a77ab13f6dd7cdbe22b0785b6314cae3a6c39190b48f4c4b12ce'
'9415840fe80f4e2f2b44c0762d8c650e5119fadc3cb494c4812406f6627f26c3'
'SKIP')
validpgpkeys=(
'ABAF11C65A2970B130ABE3C479BE3E4300411886' # Linux Torvalds
'647F28654894E3BD457199BE38DBBDC86092693E' # Greg Kroah-Hartman
'5F885602C7FD0951F565E27949F67298E6366A92' # Claire Farron
[[ "$CARCH" = "i686" ]] && _tresorpatch="tresor-patch-3.6.2_i686"
[[ "$CARCH" = "x86_64" ]] && _tresorpatch="tresor-patch-3.8.2_aesni"
_kernelname=${pkgbase#linux}
prepare() {
cd "${srcdir}/${_srcname}"
# add upstream patch
patch -p1 -i "${srcdir}/patch-${pkgver}"
# add latest fixes from stable queue, if needed
# http://git.kernel.org/?p=linux/kernel/git/stable/stable-queue.git
# set DEFAULT_CONSOLE_LOGLEVEL to 4 (same value as the 'quiet' kernel param)
# remove this when a Kconfig knob is made available by upstream
# (relevant patch sent upstream: https://lkml.org/lkml/2011/7/26/227)
patch -p1 -i "${srcdir}/change-default-console-loglevel.patch"
# TRESOR Runs Encryption Securely Outside RAM
# i.e. the purpose of this package :-)
msg "Patching TRESOR for linux"
# Initialized the patched TRESOR file with the upstream patch.
cp "${srcdir}/${_tresorpatch}" "${_tresorpatch}.patched"
patch --follow-symlinks "${_tresorpatch}.patched" "${srcdir}/${_tresorpatch}.patch"
msg "Patching source with TRESOR"
patch -p1 -i "${_tresorpatch}.patched"
if [ "${CARCH}" = "x86_64" ]; then
cat "${srcdir}/config.x86_64" > ./.config
else
cat "${srcdir}/config" > ./.config
fi
if [ "${_kernelname}" != "" ]; then
sed -i "s|CONFIG_LOCALVERSION=.*|CONFIG_LOCALVERSION=\"${_kernelname}\"|g" ./.config
sed -i "s|CONFIG_LOCALVERSION_AUTO=.*|CONFIG_LOCALVERSION_AUTO=n|" ./.config
fi
# set extraversion to pkgrel
sed -ri "s|^(EXTRAVERSION =).*|\1 -${pkgrel}|" Makefile
# don't run depmod on 'make install'. We'll do this ourselves in packaging
sed -i '2iexit 0' scripts/depmod.sh
cd "${srcdir}"
cc tresor_sysfs.c -o tresor_sysfs
cd "${srcdir}/${_srcname}"
# get kernel version
make prepare
# load configuration
# Configure the kernel. Replace the line below with one of your choice.
#make menuconfig # CLI menu for configuration
#make nconfig # new CLI menu for configuration
#make xconfig # X-based configuration
#make oldconfig # using old config from previous kernel version
# ... or manually edit .config
# rewrite configuration
#yes "" | make config >/dev/null
make oldconfig
# save configuration for later reuse
# if [ "${CARCH}" = "x86_64" ]; then
# cat .config > "${startdir}/config.x86_64.last"
# else
# cat .config > "${startdir}/config.last"
# fi
build() {
cd "${srcdir}/${_srcname}"
make ${MAKEFLAGS} LOCALVERSION= bzImage modules
_package() {
pkgdesc="The ${pkgbase/linux/Linux} kernel and modules with integrated TRESOR"
[ "${pkgbase}" = "linux" ] && groups=('base')
depends=('coreutils' 'linux-firmware' 'kmod' 'mkinitcpio>=0.7')
optdepends=('crda: to set the correct wireless channels of your country')
provides=("kernel26${_kernelname}=${pkgver}")
conflicts=("kernel26${_kernelname}")
replaces=("kernel26${_kernelname}")
backup=("etc/mkinitcpio.d/${pkgbase}.preset")
install=${pkgbase}.install
# TRESOR sysfs utility - not necessary but nice to have, in case someone
# enables CONFIG_TRESOR_SYSFS in a fork of this PKGBUILD...
cd "${srcdir}"
install -D -m755 tresor_sysfs "${pkgdir}/usr/bin/tresor_sysfs"
cd "${srcdir}/${_srcname}"
KARCH=x86
# get kernel version
_kernver="$(make LOCALVERSION= kernelrelease)"
_basekernel=${_kernver%%-*}
_basekernel=${_basekernel%.*}
mkdir -p "${pkgdir}"/{lib/modules,lib/firmware,boot}
make LOCALVERSION= INSTALL_MOD_PATH="${pkgdir}" modules_install
cp arch/$KARCH/boot/bzImage "${pkgdir}/boot/vmlinuz-${pkgbase}"
# set correct depmod command for install
cp -f "${startdir}/${install}" "${startdir}/${install}.pkg"
true && install=${install}.pkg
sed \
-e "s/KERNEL_NAME=.*/KERNEL_NAME=${_kernelname}/" \
-e "s/KERNEL_VERSION=.*/KERNEL_VERSION=${_kernver}/" \
-i "${startdir}/${install}"
# install mkinitcpio preset file for kernel
install -D -m644 "${srcdir}/${pkgbase}.preset" \
"${pkgdir}/etc/mkinitcpio.d/${pkgbase}.preset"
sed \
-e "1s|'linux.*'|'${pkgbase}'|" \
-e "s|ALL_kver=.*|ALL_kver=\"/boot/vmlinuz-${pkgbase}\"|" \
-e "s|default_image=.*|default_image=\"/boot/initramfs-${pkgbase}.img\"|" \
-e "s|fallback_image=.*|fallback_image=\"/boot/initramfs-${pkgbase}-fallback.img\"|" \
-i "${pkgdir}/etc/mkinitcpio.d/${pkgbase}.preset"
# remove build and source links
rm -f "${pkgdir}"/lib/modules/${_kernver}/{source,build}
# remove the firmware
rm -rf "${pkgdir}/lib/firmware"
# gzip -9 all modules to save 100MB of space
find "${pkgdir}" -name '*.ko' -exec gzip -9 {} \;
# make room for external modules
ln -s "../extramodules-${_basekernel}${_kernelname:--ARCH}" "${pkgdir}/lib/modules/${_kernver}/extramodules"
# add real version for building modules and running depmod from post_install/upgrade
mkdir -p "${pkgdir}/lib/modules/extramodules-${_basekernel}${_kernelname:--ARCH}"
echo "${_kernver}" > "${pkgdir}/lib/modules/extramodules-${_basekernel}${_kernelname:--ARCH}/version"
# Now we call depmod...
depmod -b "${pkgdir}" -F System.map "${_kernver}"
# move module tree /lib -> /usr/lib
mkdir -p "${pkgdir}/usr"
mv "${pkgdir}/lib" "${pkgdir}/usr/"
# add vmlinux
install -D -m644 vmlinux "${pkgdir}/usr/lib/modules/${_kernver}/build/vmlinux"
_package-headers() {
pkgdesc="Header files and scripts for building modules for ${pkgbase/linux/Linux} kernel"
provides=("kernel26${_kernelname}-headers=${pkgver}")
conflicts=("kernel26${_kernelname}-headers")
replaces=("kernel26${_kernelname}-headers")
install -dm755 "${pkgdir}/usr/lib/modules/${_kernver}"
cd "${srcdir}/${_srcname}"
install -D -m644 Makefile \
"${pkgdir}/usr/lib/modules/${_kernver}/build/Makefile"
install -D -m644 kernel/Makefile \
"${pkgdir}/usr/lib/modules/${_kernver}/build/kernel/Makefile"
install -D -m644 .config \
"${pkgdir}/usr/lib/modules/${_kernver}/build/.config"
mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/include"
for i in acpi asm-generic config crypto drm generated keys linux math-emu \
media net pcmcia scsi sound trace uapi video xen; do
cp -a include/${i} "${pkgdir}/usr/lib/modules/${_kernver}/build/include/"
done
# copy arch includes for external modules
mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/x86"
cp -a arch/x86/include "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/x86/"
# copy files necessary for later builds, like nvidia and vmware
cp Module.symvers "${pkgdir}/usr/lib/modules/${_kernver}/build"
cp -a scripts "${pkgdir}/usr/lib/modules/${_kernver}/build"
# fix permissions on scripts dir
chmod og-w -R "${pkgdir}/usr/lib/modules/${_kernver}/build/scripts"
mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/.tmp_versions"
mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/kernel"
cp arch/${KARCH}/Makefile "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/"
if [ "${CARCH}" = "i686" ]; then
cp arch/${KARCH}/Makefile_32.cpu "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/"
fi
cp arch/${KARCH}/kernel/asm-offsets.s "${pkgdir}/usr/lib/modules/${_kernver}/build/arch/${KARCH}/kernel/"
# add docbook makefile
install -D -m644 Documentation/DocBook/Makefile \
"${pkgdir}/usr/lib/modules/${_kernver}/build/Documentation/DocBook/Makefile"
# add dm headers
mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/md"
cp drivers/md/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/md"
# add inotify.h
mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/include/linux"
cp include/linux/inotify.h "${pkgdir}/usr/lib/modules/${_kernver}/build/include/linux/"
# add wireless headers
mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/net/mac80211/"
cp net/mac80211/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/net/mac80211/"
# add dvb headers for external modules
# in reference to:
# http://bugs.archlinux.org/task/9912
mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-core"
cp drivers/media/dvb-core/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-core/"
# and...
# http://bugs.archlinux.org/task/11194
mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/include/config/dvb/"
cp include/config/dvb/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/include/config/dvb/"
# add dvb headers for http://mcentral.de/hg/~mrec/em28xx-new
# in reference to:
# http://bugs.archlinux.org/task/13146
mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-frontends/"
cp drivers/media/dvb-frontends/lgdt330x.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-frontends/"
mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/i2c/"
cp drivers/media/i2c/msp3400-driver.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/i2c/"
# add dvb headers
# in reference to:
# http://bugs.archlinux.org/task/20402
mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/usb/dvb-usb"
cp drivers/media/usb/dvb-usb/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/usb/dvb-usb/"
mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-frontends"
cp drivers/media/dvb-frontends/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/dvb-frontends/"
mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/tuners"
cp drivers/media/tuners/*.h "${pkgdir}/usr/lib/modules/${_kernver}/build/drivers/media/tuners/"
# add xfs and shmem for aufs building
mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/fs/xfs"
mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build/mm"
# removed in 3.17 series
# cp fs/xfs/xfs_sb.h "${pkgdir}/usr/lib/modules/${_kernver}/build/fs/xfs/xfs_sb.h"
# copy in Kconfig files
for i in $(find . -name "Kconfig*"); do
mkdir -p "${pkgdir}"/usr/lib/modules/${_kernver}/build/`echo ${i} | sed 's|/Kconfig.*||'`
cp ${i} "${pkgdir}/usr/lib/modules/${_kernver}/build/${i}"
done
chown -R root.root "${pkgdir}/usr/lib/modules/${_kernver}/build"
find "${pkgdir}/usr/lib/modules/${_kernver}/build" -type d -exec chmod 755 {} \;
# strip scripts directory
find "${pkgdir}/usr/lib/modules/${_kernver}/build/scripts" -type f -perm -u+w 2>/dev/null | while read binary ; do
case "$(file -bi "${binary}")" in
*application/x-sharedlib*) # Libraries (.so)
/usr/bin/strip ${STRIP_SHARED} "${binary}";;
*application/x-archive*) # Libraries (.a)
/usr/bin/strip ${STRIP_STATIC} "${binary}";;
*application/x-executable*) # Binaries
/usr/bin/strip ${STRIP_BINARIES} "${binary}";;
esac
done
# remove unneeded architectures
rm -rf "${pkgdir}"/usr/lib/modules/${_kernver}/build/arch/{alpha,arc,arm,arm26,arm64,avr32,blackfin,c6x,cris,frv,h8300,hexagon,ia64,m32r,m68k,m68knommu,metag,mips,microblaze,mn10300,openrisc,parisc,powerpc,ppc,s390,score,sh,sh64,sparc,sparc64,tile,unicore32,um,v850,xtensa}
_package-docs() {
pkgdesc="Kernel hackers manual - HTML documentation that comes with the ${pkgbase/linux/Linux} kernel"
provides=("kernel26${_kernelname}-docs=${pkgver}")
conflicts=("kernel26${_kernelname}-docs")
replaces=("kernel26${_kernelname}-docs")
cd "${srcdir}/${_srcname}"
mkdir -p "${pkgdir}/usr/lib/modules/${_kernver}/build"
cp -al Documentation "${pkgdir}/usr/lib/modules/${_kernver}/build"
find "${pkgdir}" -type f -exec chmod 444 {} \;
find "${pkgdir}" -type d -exec chmod 755 {} \;
# remove a file already in linux package
rm -f "${pkgdir}/usr/lib/modules/${_kernver}/build/Documentation/DocBook/Makefile"
pkgname=("${pkgbase}" "${pkgbase}-headers" "${pkgbase}-docs")
for _p in ${pkgname[@]}; do
eval "package_${_p}() {
$(declare -f "_package${_p#${pkgbase}}")
_package${_p#${pkgbase}}
done
Running makepkg -S to build the source tarball:
claire ~/Builds/linux-tresor % makepkg -S
==> Making package: linux-tresor 3.18.2-1 (Fri 9 Jan 17:24:58 GMT 2015)
==> Retrieving sources...
-> Downloading linux-3.18.tar.xz...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 77.1M 100 77.1M 0 0 2852k 0 0:00:27 0:00:27 --:--:-- 5975k
-> Downloading linux-3.18.tar.sign...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 473 100 473 0 0 1079 0 --:--:-- --:--:-- --:--:-- 1082
-> Downloading patch-3.18.2.xz...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 40932 100 40932 0 0 48079 0 --:--:-- --:--:-- --:--:-- 48042
-> Downloading patch-3.18.2.sign...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 819 100 819 0 0 1207 0 --:--:-- --:--:-- --:--:-- 1207
-> Found config
-> Found config.x86_64
-> Found linux-tresor.preset
-> Found linux-tresor.install
-> Found change-default-console-loglevel.patch
-> Downloading tresor_sysfs.c...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 2299 100 2299 0 0 28726 0 --:--:-- --:--:-- --:--:-- 29101
-> Downloading tresor-patch-3.6.2_i686...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 47050 100 47050 0 0 344k 0 --:--:-- --:--:-- --:--:-- 345k
-> Found tresor-patch-3.6.2_i686.patch
-> Found tresor-patch-3.6.2_i686.patch.sig
-> Found patch-3.18.2.sign
-> Found config
-> Found config.x86_64
-> Found linux-tresor.preset
-> Found linux-tresor.install
-> Found change-default-console-loglevel.patch
-> Found tresor_sysfs.c
-> Downloading tresor-patch-3.8.2_aesni...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 47192 100 47192 0 0 350k 0 --:--:-- --:--:-- --:--:-- 351k
-> Found tresor-patch-3.8.2_aesni.patch
-> Found tresor-patch-3.8.2_aesni.patch.sig
-> Found patch-3.18.2.sign
-> Found config
-> Found config.x86_64
-> Found linux-tresor.preset
-> Found linux-tresor.install
-> Found change-default-console-loglevel.patch
-> Found tresor_sysfs.c
==> Validating source files with sha256sums...
linux-3.18.tar.xz ... Passed
linux-3.18.tar.sign ... Skipped
patch-3.18.2.xz ... Passed
patch-3.18.2.sign ... Skipped
config ... Passed
config.x86_64 ... Passed
linux-tresor.preset ... Passed
linux-tresor.install ... Passed
change-default-console-loglevel.patch ... Passed
tresor_sysfs.c ... Passed
==> Validating source files with sha256sums...
tresor-patch-3.6.2_i686 ... Passed
tresor-patch-3.6.2_i686.patch ... Passed
tresor-patch-3.6.2_i686.patch.sig ... Skipped
==> Validating source files with sha256sums...
tresor-patch-3.8.2_aesni ... Passed
tresor-patch-3.8.2_aesni.patch ... Passed
tresor-patch-3.8.2_aesni.patch.sig ... Skipped
==> Verifying source file signatures with gpg...
linux-3.18.tar ... Passed
patch-3.18.2 ... Passed
tresor-patch-3.6.2_i686.patch ... Passed
patch-3.18.2 ... Passed
tresor-patch-3.8.2_aesni.patch ... Passed
patch-3.18.2 ... Passed
==> Entering fakeroot environment...
==> Creating source package...
-> Adding PKGBUILD...
-> Generating .SRCINFO file...
-> Adding config...
-> Adding config.x86_64...
-> Adding linux-tresor.preset...
-> Adding linux-tresor.install...
-> Adding change-default-console-loglevel.patch...
-> Adding tresor-patch-3.6.2_i686.patch...
-> Adding tresor-patch-3.6.2_i686.patch.sig...
-> Adding config...
ln: failed to create symbolic link ‘/home/claire/Builds/linux-tresor/srclinks.W5jPjydXO/linux-tresor/config’: File exists
-> Adding config.x86_64...
ln: failed to create symbolic link ‘/home/claire/Builds/linux-tresor/srclinks.W5jPjydXO/linux-tresor/config.x86_64’: File exists
-> Adding linux-tresor.preset...
ln: failed to create symbolic link ‘/home/claire/Builds/linux-tresor/srclinks.W5jPjydXO/linux-tresor/linux-tresor.preset’: File exists
-> Adding linux-tresor.install...
ln: failed to create symbolic link ‘/home/claire/Builds/linux-tresor/srclinks.W5jPjydXO/linux-tresor/linux-tresor.install’: File exists
-> Adding change-default-console-loglevel.patch...
ln: failed to create symbolic link ‘/home/claire/Builds/linux-tresor/srclinks.W5jPjydXO/linux-tresor/change-default-console-loglevel.patch’: File exists
-> Adding tresor-patch-3.8.2_aesni.patch...
-> Adding tresor-patch-3.8.2_aesni.patch.sig...
-> Adding config...
ln: failed to create symbolic link ‘/home/claire/Builds/linux-tresor/srclinks.W5jPjydXO/linux-tresor/config’: File exists
-> Adding config.x86_64...
ln: failed to create symbolic link ‘/home/claire/Builds/linux-tresor/srclinks.W5jPjydXO/linux-tresor/config.x86_64’: File exists
-> Adding linux-tresor.preset...
ln: failed to create symbolic link ‘/home/claire/Builds/linux-tresor/srclinks.W5jPjydXO/linux-tresor/linux-tresor.preset’: File exists
-> Adding linux-tresor.install...
ln: failed to create symbolic link ‘/home/claire/Builds/linux-tresor/srclinks.W5jPjydXO/linux-tresor/linux-tresor.install’: File exists
-> Adding change-default-console-loglevel.patch...
ln: failed to create symbolic link ‘/home/claire/Builds/linux-tresor/srclinks.W5jPjydXO/linux-tresor/change-default-console-loglevel.patch’: File exists
-> Compressing source package...
==> Leaving fakeroot environment.
==> Source package created: linux-tresor (Fri 9 Jan 17:25:50 GMT 2015)
makepkg -S 24.38s user 1.40s system 48% cpu 53.129 total
Here is the resulting source tarball.
As far as I can see, they should be working PKGBUILDs too which meet the standards.
EDIT: Here's the bug report
Last edited by clfarron4 (2015-01-09 17:42:34)

Loosing source location with separate source files

Hi,
I am compiling my code with g++ (version 2.8.1) using the -g option. When I use one large source file with all my classes and the main routine in it, I can browse the source in the analyzer GUI. If I split out all classes into separate source files (which I was hoping would help me maintain the code better), I am no longer able to browse the source files. Analyzer complains about the directory where all source files live not being accessible.
thanks for any input anyone might be able to offer!
h.

In Windows XP the path should be
c:\Documents and Settings\<username>\Application Data\com.adobe.formscentral.FormsCentralForAcrobat\Local Store\data
You might notice that in that folder the images and forms are saved as separate objects and not all in one file like the FCDT file.
For local file the FCDT contains all you need. If you ever move to online forms and start collecting data then you will notice that that FCDT doesn't contain the data recieved but only the design of the form. In the case you move the form online then we never save the form locally so there is no way to use a source control to save the form other again than just saving the design format (fcdt file) and not the data received.
You can vote for a new request here http://forums.adobe.com/community/formscentral?view=idea (click on the "Create an idea" in the top right corner)
hope this helps
Gen

Wuala Validating source files with md5sums... wuala.tar.gz . FAILED

Similar Messages

Maybe you are looking for