Wwsdl endpoint hostname vs. fqdn
When I assemble the web service the end point in the wsdl contains the string REPLACE_WITH_ACTUAL_URL. Once deployed this is replaced with hostname. The problem is that when users on another network build a proxy they cannot see hostname. For now they override the endpoint but I'd like the wsdl to contain the fully qualified domain name myhost.mydomain rather than just myhost. Any way to make this happen?
You should answer with the short name.
The FQDN is a network name and the host doesn't really need to know it. It's what the other nodes on the network refer to it as. You can have many different domains in your network and your host can have more than one FQDN. Always use short names when creating the hostname of the system.
Similar Messages
-
Hostname or FQDN problems when using proxies
I recently set up Firefox (10.0.2) on my work network as I hate using IE. There are a whole series of Corporate websites that I connect to direct and I can connect to the Internet via a proxy. Unfortunately a lot of the Corporate websites only use the hostname in their URL rather than the full FQDN, relying on the operating system (Windows XP) to expand the hostname to the full FQDN and resolve the IP address (this works fine within IE). Unfortunately with Firefox when it finds a URL with only a hostname it sends it direc to the proxy which rejects it. However, if I manually put in the same URL using the hosts FQDN the website is pulled down absolutely fine.
As I don't control the internal websites I can't put all of the individual hostnames in the proxy exception settings as I simply don't know them and they are likely to change over time.
Is there some magic entry I can put in the proxy exception setting that tells Firefox not to send hostname only URLs to the proxy? or to at least attempt to resolve the hostname to FQDN and check against the exceptions list prior to forwarding to the proxy?
Many thanks,
KevYes dup count protection strikes again, this is a common problem that keeps popping up. NI should put a warning about this. It had me stuck for a few days when I migrated from traditional DAQ to DAQMX, and it stumps just about everyone who encounters it for the first time. To make things worse, it is a property that is very well hidden in the property hierarchy.
Paul
Paul Falkenstein
Coleman Technologies Inc.
CLA, CPI, AIA-Vision
Labview 4.0- 2013, RT, Vision, FPGA -
Adapter URL - hostname vs FQDN
I see the following error in dev_icm:
MatchTargetName("<hostname>", "CN=<hostname.domain.com, OU=XXXXXXXX, O=XXXXXXXXXXXXXX
SSL NI-sock: local=<IP >:63071 peer=<IP>:<https java port>
<<- ERROR: SapSSLSessionStart(sssl_hdl=0x1059a4a20)==SSSLERR_SERVER_CERT_MISMATCH
ERROR => IcmConnInitClientSSL: SapSSLSessionStart failed (-30): SSSLERR_SERVER_CERT_MISMATCH [icxxconn_m
ERROR => URLDecode recognised invalid sign in form field [ictxxfilt_mt 248]
ERROR => illegal request [http_auth_mt.c 470]
The issue seems to be that the certificate is for FQDN and request is
with just the hostname. Also in the sld the adapter engine urls are all
hostname:port. Where do I change this such that it uses the FQDN:port.
Any direction is much appreciated.
Thanks
S.somewhat similar problem solved in the below thread:
Web UI does not work after deployment of BBPCRM SP for CRM 7
P.N.: the above thread is not related to XI/PI......giving for your reference -
Batch Script using System Varriable for Hostname and FQDN results in large space between
I have a batch script running on Windows 7 that I've created to help a physical computer, connect to his virtual cousin. Problem is when I try to make
it use the FQDN (required by the View Client) it puts a large space between the hostname and the domain.
Result
ECHO Connecting View Client to PREFIX-SERIAL .domain.comOR"C:\Program Files\VmWare\View.exe" -Args -serverURL PREFIX-SERIAL .domain.com
Our computers are named a combination of a prefix and the serial number. Our virtual computer names are the same, but with a different prefix. So my attempt was to make a connection
script, using the computer serial number. My Process:
Setting %serial% variable.
for /F "skip=1 tokens=*" %%b in ('wmic bios get serialnumber') do if not defined serial set serial=%%b
Set %hostname% variable.
set hostname=PREFIX-%serial%
Installation command line
"C:\Program Files\VmWare\View.exe" -Args -serverURL %hostname%.domain.com
That results in the output at the beginning of my post.
I've also tried
%hostname%.%userdomain%.com
PREFIX-%serial%.%userdomain%.com
PREFIX-%serial%.domain.com
SET FQDN=.domain.com
PREFIX-%serial%%FQDN%
%hostname%%FQDN%
I also tried carets and quotes on set commands without any improvement.
I'm sure I'm missing something simple here. Any advise?
There's no place like 127.0.0.1Will something like this get you what you are looking for?
(gwmi win32_bios).SerialNumber+(gwmi WIN32_ComputerSystem).Domain
Or
$hostname=(gwmi win32_bios).SerialNumber+"."+(gwmi WIN32_ComputerSystem).Domain
Sorry just realized your looking to do this in a Batch file...so maybe something like this
@echo off
for /F "skip=1 delims=" %%j in ('powershell "[System.Net.Dns]::GetHostByName((hostname)).HostName"') do (
set Host=%%j
goto :DONE
:DONE
echo %HOST% -
I have 2 servers that I configured recently at the same time, and for some reason one of my servers, in ard scanner, shows the FQDN, and the other server only has the hostname, without the domain info appended.
However, when I look in my dns (hosted on a w2k3 server), it appears that I have the fqdn and reverse lookups properly configured. Also, when I run nslookups on both servers from terminal, I am getting fqdn's. (I did nslookups for both machines from both machines). Lastly, if I run hostname on both computers, I get the fqdn...
So, is ARD crazy, or do I need to look at my dns or server to determine why I am not seeing my fqdn on 1 server?
thanks in advanceYou should answer with the short name.
The FQDN is a network name and the host doesn't really need to know it. It's what the other nodes on the network refer to it as. You can have many different domains in your network and your host can have more than one FQDN. Always use short names when creating the hostname of the system. -
Hello,
during installation of Solaris 11, the installer asks for a machine name. Is this supposed to be the short hostname, or the FQDN?
If the former, then there would be no possibility to setup a domain name during installation, and it would have to be defined either by DHCP, or by a custom NWAM profile.
Regards,
OliverYou should answer with the short name.
The FQDN is a network name and the host doesn't really need to know it. It's what the other nodes on the network refer to it as. You can have many different domains in your network and your host can have more than one FQDN. Always use short names when creating the hostname of the system. -
Cannot add server to pool: OVMAPI_4004E, but hostname set to FQDN
It's very simillar problem like thread "Cannot Add Server to Pool: OVMAPI_4010E Attempt to send command: dispatch..", but setting
hostname with FQDN on Ora VM Manager and Ora VM Server, repairing all configuration files (using grep -R ...) and reboot OVM
server and OVMM didn't brought any effect...
Environment:
Oracle VM Server version 3.2.2
Build: 520
Oracle VM Manager:
Version: 3.2.2.520
Build: 20130218_520
Description:
I have discovered and setup an OVM Server. Then I tried to create a new pool "ikr-pool". When I tried to attach discovered server ("srv01-xx.cssz.cz"),
I got error attached bellow. After this actions svr01-xx stays incorrectly as "member of pool" in /etc/ovs-agent/db/server database, so I need on VM server
to stop ovs-agent, remove file /etc/ovs-agent/db/server, start ovs-agent again, and then re-take ownership on VM server again. Then srv01-xx stays
as "Unassigned server".
Regards
Vladislav Rames
<-------------------------------------------------------------------------------------------------------------Begin of error message--------------------------------------------------------------------------->
Job Construction Phase
Job ID: 1364477027337
begin()
Appended operation 'Server Join Server Pool' to object '31:33:37:35:32:32:5a:43:32:32:35:30:30:57:44:46 (srv01-xx.cssz.cz)'.
Appended operation 'Server Pool Construct' to object '0004fb0000020000d0b83b23645cbca2 (ikr-pool)'.
Appended operation 'Server Pool Virtual IP Configure' to object '0004fb0000020000d0b83b23645cbca2 (ikr-pool)'.
Appended operation 'Server Pool Member Update' to object '0004fb0000020000d0b83b23645cbca2 (ikr-pool)'.
Appended operation 'Server Cluster Configure' to object '31:33:37:35:32:32:5a:43:32:32:35:30:30:57:44:46 (srv01-xx.cssz.cz)'.
Appended operation 'Server Cluster Construct' to object '31:33:37:35:32:32:5a:43:32:32:35:30:30:57:44:46 (srv01-xx.cssz.cz)'.
commit()
Completed Step: COMMIT
Objects and Operations
Object (IN_USE): [Cluster] d0b83b23645cbca2
Object (IN_USE): [Server] 31:33:37:35:32:32:5a:43:32:32:35:30:30:57:44:46 (srv01-xx.cssz.cz)
Operation: Server Join Server Pool
Operation: Server Cluster Configure
Operation: Server Cluster Construct
Object (IN_USE): [ServerPool] 0004fb0000020000d0b83b23645cbca2 (ikr-pool)
Operation: Server Pool Construct
Operation: Server Pool Virtual IP Configure
Operation: Server Pool Member Update
Job Running Phase at 2013-03-28 14:23:47,337
Job Participants: []
Actioner
14:23:47,909: Starting operation 'Server Join Server Pool' on object '31:33:37:35:32:32:5a:43:32:32:35:30:30:57:44:46 (srv01-xx.cssz.cz)'
14:23:47,914: Completed operation 'Server Join Server Pool' with direction ==> LATER
14:23:47,920: Starting operation 'Server Pool Construct' on object '0004fb0000020000d0b83b23645cbca2 (ikr-pool)'
14:23:47,971: Completed operation 'Server Pool Construct' with direction ==> DONE
14:23:47,977: Starting operation 'Server Pool Virtual IP Configure' on object '0004fb0000020000d0b83b23645cbca2 (ikr-pool)'
14:23:53,221: Completed operation 'Server Pool Virtual IP Configure' with direction ==> DONE
14:23:53,232: Starting operation 'Server Pool Member Update' on object '0004fb0000020000d0b83b23645cbca2 (ikr-pool)'
Job Internal Error (Operation)com.oracle.ovm.mgr.api.exception.FailedOperationException: OVMAPI_4010E Attempt to send command: dispatch to server: srv01-xx.cssz.cz failed. OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/3 set_pool_member_ip_list [10.20.11.11], Status: org.apache.xmlrpc.XmlRpcException: I/O error while communicating with HTTP server: Connection timed out [Thu Mar 28 14:36:30 CET 2013] [Thu Mar 28 14:36:30 CET 2013]
at com.oracle.ovm.mgr.action.ActionEngine.sendCommandToServer(ActionEngine.java:512)
at com.oracle.ovm.mgr.action.ActionEngine.sendDispatchedServerCommand(ActionEngine.java:449)
at com.oracle.ovm.mgr.action.ActionEngine.sendServerCommand(ActionEngine.java:383)
at com.oracle.ovm.mgr.action.ServerPoolAction.setServerPoolMembers(ServerPoolAction.java:138)
at com.oracle.ovm.mgr.op.virtual.ServerPoolMemberUpdate.updateMemberList(ServerPoolMemberUpdate.java:363)
at com.oracle.ovm.mgr.op.virtual.ServerPoolMemberUpdate.action(ServerPoolMemberUpdate.java:138)
at com.oracle.ovm.mgr.api.collectable.ManagedObjectDbImpl.executeCurrentJobOperationAction(ManagedObjectDbImpl.java:1156)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:356)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:333)
at com.oracle.odof.core.storage.Transaction.invokeMethod(Transaction.java:865)
at com.oracle.odof.core.Exchange.invokeMethod(Exchange.java:244)
at com.oracle.ovm.mgr.api.virtual.ServerPoolProxy.executeCurrentJobOperationAction(Unknown Source)
at com.oracle.ovm.mgr.api.job.JobEngine.operationActioner(JobEngine.java:230)
at com.oracle.ovm.mgr.api.job.JobEngine.operationActioner(JobEngine.java:264)
at com.oracle.ovm.mgr.api.job.JobEngine.operationActioner(JobEngine.java:264)
at com.oracle.ovm.mgr.api.job.JobEngine.objectActioner(JobEngine.java:322)
at com.oracle.ovm.mgr.api.job.InternalJobDbImpl.objectCommitter(InternalJobDbImpl.java:1340)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:356)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:333)
at com.oracle.odof.core.BasicWork.invokeMethod(BasicWork.java:106)
at com.oracle.odof.command.InvokeMethodCommand.process(InvokeMethodCommand.java:92)
at com.oracle.odof.core.BasicWork.processCommand(BasicWork.java:81)
at com.oracle.odof.core.TransactionManager.processCommand(TransactionManager.java:752)
at com.oracle.odof.core.WorkflowManager.processCommand(WorkflowManager.java:467)
at com.oracle.odof.core.WorkflowManager.processWork(WorkflowManager.java:525)
at com.oracle.odof.io.AbstractClient.run(AbstractClient.java:42)
at java.lang.Thread.run(Thread.java:662)
Caused by: com.oracle.ovm.mgr.api.exception.IllegalOperationException: OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/3 set_pool_member_ip_list [10.20.11.11], Status: org.apache.xmlrpc.XmlRpcException: I/O error while communicating with HTTP server: Connection timed out [Thu Mar 28 14:36:30 CET 2013]
at com.oracle.ovm.mgr.action.ActionEngine.sendAction(ActionEngine.java:803)
at com.oracle.ovm.mgr.action.ActionEngine.sendCommandToServer(ActionEngine.java:508)
... 34 more
FailedOperationCleanup
Starting failed operation 'Server Pool Member Update' cleanup on object 'ikr-pool'
Complete rollback operation 'Server Pool Member Update' cleanup on object 'ikr-pool'
Rollbacker
14:36:31,156: Starting rollbacker...
Executing rollback operation 'Server Pool Member Update' on object '0004fb0000020000d0b83b23645cbca2 (ikr-pool)'
<-------------------------------------------------------------------------------------------------------------End of error message----------------------------------------------------------------------------->Solved. Problem was the same like in thread "I/O error while communicating with HTTP server: Connection timed out" - it wasn't accessible IP connection between Ora VM Manager and Ora VM server IP alias for server pool. But there was very confusing message in errorlog: "dispatch https://?uname?:[email protected]:8899/api/3 set_pool_member_ip_list [10.20.11.11], Status: org.apache.xmlrpc.XmlRpcException: I/O error while communicating with HTTP server: Connection timed out [Thu Mar 28 14:36:30 CET 2013]". Noticed IP address was IP address for VM server, not for VM pool, which makes me quite angry.
Best Regards
Vladislav Rames -
Host name not derived as FQDN (TH_GET_PLUGIN_INFO )
Hello,
we've got a problem in the CRM web UI, however, I assume it is more related to general BSP settings.
When testing a CRM component ICCMP_HEADER which is a BSP application in the component workbench
(tcode BSP_WD_CMPWB). The browser tells that an exception
CX_BSP_WD_HTTP_RESPONSE_ERROR is thrown in class
CL_BSP_WD_STREAM_LOADER, method LOAD_FROM_URL.
I did some debugging and found out that in this method in line 20,
function module TH_PLUGINS_ACTIVE is called. It returns that both HTTP
and HTTPS are active. Due to this, in line 31 the system calls method
CL_HTTP_CLIENT=>CREATE_BY_DESTINATION. In this method function module
TH_GET_PLUGIN_INFO is called. It returns the host name (uxsapl07)
without FQDN (.mobilkom.at). I tested the function module on our
development system (MSD) and it returns the full hostname
(vssapk08.mobilkom.at).
I've checked the host name buffer in tcode SMICM and it shows only the
hostname (no FQDN). If refreshing the buffer, it gets filled again with
only the hostname.
I've compared settings on productive system MSP with development system
MSD:
parameter: SAPLOCALHOSTFULL
MSP: uxsapl07.mobilkom.at
MSD: vssapk08.mobilkom.at
parameter: icm/host_name_full
MSP: empty
MSD: empty
However, in tcode SMICM --> paramters, both systems show the FQDN for
parameter icm/host_name_full.
I don't know why it works then on MSD and not on MSP.
Many thanks & regards
Wolfgangparameter: icm/host_name_full
MSP: empty
MSD: empty
try setting the above parameter with the FQDN (RZ10) and restart the ICM
after restart run program RSPARAM to check whether the changes had taken effect
Regards
Raja -
How to refresh cache for hostname used in RFC Dest
Hello @all,
does anyone knows how to refresh the cache where (for example) the hostnames used in ABAP RFC Destinations are stored? I'm getting an error "Details: NiHsLGetNodeAddr: hostname cached as unknown" when I try to test my generated Trusted RFC Destination...
Thanks in advance for any help!
Kind Regards, FalkHi Nilesh,
unfortunately the solution does not work. Still I get the following error while testing the RFC Destination:
DETAIL: NiPGetHostByName: hostname 'MHPAEAFC' not found
Two things have been done.
1. an entry within /etc/resolv.conf for the host mhpaeafc
2. an entry within the hosts-file containing the IP adress, hostname and FQDN
Do you have any idea why the SAP system still is not able to resolve the hostname?
We tried 'ping' and 'nslookup' on the operating system hosting the SAP system with the result that the host can be resolved.
Thanks for any help/hint.
Best regards, Falk -
Cannot connect to server via hostname
When I ping this server, it replies with the correct IP address. However, if I want to RDP to it, I can only do it by IP and not hostname.
If I go by hostname, it returns this error:
"Remote Desktop cannot verify the identity of the remote computer because there is a time or date difference between your computer and the remote computer. Make sure your computer's clock is set to the correct time, and then try connecting again. If
the problem occurs again, contact your network administrator or the owner of the remote computer."
I verified that there is no date or time difference, which I doubt would be the cause of the problem anyway since I'm able to RDP to that server via IP address just fine.
I found this article:
http://andywolf.com/windows-2008-r2-server-loses-network-connectivity/#comments
It details the same symptoms, except the fact that it says they ran this command:
netsh trace start scenario=netconnection capture=yes report=yes tracefile=c:\net.etl
And it said that they discovered kernel socket leaks as a result. I did not find anything that indicated kernel socket leaks.
any ideas?Hi
You need to run couple of test to make sure the host name is resolving to the correct IP.
Form another working machine run nslookup and put this computer hostname then hostname with FQDN and make sure it is returning the correct IP.
If its not then try clearing cache on the local machine form cmd with ipconfig /flushdns and on you DNS server with dnscmd /clearcache. Try again to resolve the hostname if still the same.
Check in the DNS console and make sure this host got the correct IP address assigned to it if not delete the record and release and renew the IP if you are using dynamic IP. If you are using static then ipconfig /registerdns.
It could be the DNS suffix issue.
Please update with the above. -
Problems with Agent x Hostname
Hy guys,
its my frist time using Grid Control, after read carefully the docs I'm still having error with the hostname when installing the agent, see:
etc/host
192.168.220.151 ORACLEGRID
127.0.0.1 localhost
Error when installing the agent:
=======================================================================
Checking for the Hostname...
Actual Result: Hostname is not FQDN, Domain name is null.
Check complete. The overall result of this check is: Failed <<<<
Problem: S_CHECK_HOSTNAME_ERROR
Recommendation: Please verify the hostname in /etc/hosts. The /etc/hosts might either contain short host name or ip address instead of full host name.
=======================================================================
I tryed every combinations
<IP> <hostname>
<IP> <hostname> <FQDN>
<IP> <FQDN> <hostname>
<IP> <FQDN>
I got the same erros though.
Can anyone help me, the OS is Windows 2003r2 enterprise and the GRID is 10.2.
Tks a lot.Yes I re-installed and it did not work for me..it kept saying that I had uppercase in my computer name...changed it all to lowercase and got same error message still so juts bypassed it
Do you have any idea bout the OMS error message that I got above...reposted below:
Configuration assistant "OMS Configuration" failed
The "C:\oracle\agent10g\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------
When I checked the file named above all I saw in it was
rem Copyright (c) 1999, 2009, Oracle. All rights reserved.
oracle.sysman.emcp.agent.AgentPlugIn ...
I was asking for Oracle grid control on Windows Vista 64bit, I know the 32 bit version does exist
Edited by: Twodees on Dec 7, 2009 1:31 PM
Edited by: Twodees on Dec 7, 2009 1:33 PM
Edited by: Twodees on Dec 7, 2009 1:34 PM -
SCOM 2012 Installation fails while deploying Datawarehouse
Hi All,
I have a strange issue, My SCOM 2012 installation fails during Datawarehouse deployment. (This setup is not SCOM 2012 SP1 OR 2012 R2 it is just SCOM 2012)
When i check the SCOM installation logs it says it tried to connect to my Management server and it could not open Port 5724.
During the installation i checked that the SDK Service was stopping frequently and also a Visual studio debugger popup also occured. Can any one assist in solving the issue ?
Screenshots:
Error logs
Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingComponent.GetExistingManagementServerFromOMDB(String omSQLServer, Nullable`1 omSqlPort, String omDatabaseName, String& firstWorkingManagementServer)
[01:08:57]: Error:
:Inner Exception.Type: System.ServiceModel.EndpointNotFoundException, Exception Error Code: 0x80131500, Exception.Message: Could not connect to net.tcp://My management server:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:03.0079280.
TCP error code 10061: No connection could be made because the target machine actively refused it 172.17.221.45:5724.
[01:08:57]: Error:
:InnerException.StackTrace:
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
[01:08:57]: Error:
:Inner Exception.Type: System.Net.Sockets.SocketException, Exception Error Code: 0x80131500, Exception.Message: No connection could be made because the target machine actively refused it 172.17.221.45:5724
[01:08:57]: Error:
:InnerException.StackTrace: at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
[01:08:57]: Always:
:Management Server My management server failed to connect, now trying another one.
[01:08:57]: Warn:
:Failed to connect to any SDK in the management group, trying again
[01:09:17]: Info:
:Info:trying to connect with server My management server
[01:09:26]: Info:
:Info:Error while connecting to management server: The Data Access service is either not running or not yet initialized. Check the event log for more information.
[01:09:26]: Error:
:Couldn't connect to mgt server stack: : Threw Exception.Type: Microsoft.EnterpriseManagement.Common.ServiceNotRunningException, Exception Error Code: 0x80131500, Exception.Message: The Data Access service is either not running or not yet initialized.
Check the event log for more information.
[01:09:26]: Error:
:StackTrace: at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception ex)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore clientCallback)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
at Microsoft.EnterpriseManagement.ManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings connectionSettings, ManagementGroupInternal internals)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingComponent.GetExistingManagementServerFromOMDB(String omSQLServer, Nullable`1 omSqlPort, String omDatabaseName, String& firstWorkingManagementServer)
[01:09:26]: Error:
:Inner Exception.Type: System.ServiceModel.EndpointNotFoundException, Exception Error Code: 0x80131500, Exception.Message: Could not connect to net.tcp://My management server:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:03.0040216.
TCP error code 10061: No connection could be made because the target machine actively refused it 172.17.221.45:5724.
[01:09:26]: Error:
:InnerException.StackTrace:
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
[01:09:26]: Error:
:Inner Exception.Type: System.Net.Sockets.SocketException, Exception Error Code: 0x80131500, Exception.Message: No connection could be made because the target machine actively refused it 172.17.221.45:5724
[01:09:26]: Error:
:InnerException.StackTrace: at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
[01:09:26]: Always:
:Management Server My management server failed to connect, now trying another one.
[01:09:26]: Warn:
:Failed to connect to any SDK in the management group, trying again
[01:09:46]: Error:
:Error:Could not connect to management group. Can not continue with DW upgrade...
[01:09:46]: Info:
:Info:got MG connection
[01:09:46]: Error:
:Error:Could not connect to management group. Cannot continue with current action...
[01:09:46]: Error:
:FATAL ACTION: GetManagementGroup
[01:09:46]: Error:
:FATAL ACTION: DWInstallActionsPostProcessor
[01:09:46]: Error:
:ProcessInstalls: Running the PostProcessDelegate returned false.
[01:09:46]: Always:
:SetErrorType: Setting VitalFailure. currentInstallItem: Data Warehouse Configuration
[01:09:46]: Error:
:ProcessInstalls: Running the PostProcessDelegate for OMDATAWAREHOUSE failed.... This is a fatal item. Setting rollback.
[01:09:46]: Info:
:SetProgressScreen: FinishMinorStep.
[01:09:46]: Always:
:!***** Installing: OMCONSOLE ***
[01:09:46]: Info:
:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
[01:09:46]: Always:
[01:09:46]: Always:
:****Starting*RollBack*******************************************
[01:09:46]: Always:
[01:09:46]: Info:
:SetProgressScreen: StartMinorStep.
[01:09:46]: Info:
:SetProgressScreen: StartMinorStep.
[01:09:46]: Debug:
:ProcessInstalls: Install Item Data Warehouse Configuration has a Preprocessing delegate of RunXamlPreProcessor. Launching it now.
[01:09:46]: Always:
:Determining actions to be run.
[01:09:46]: Always:
:Done validating action list; now running individual actions.
[01:09:46]: Always:
:Current Action: UninstallPrePreprocessor
[01:09:46]: Info:
:UninstallPrePreprocessor completed.
[01:09:46]: Always:
:Current Action: UpgradePreprocessor
[01:09:46]: Info:
:UpgradePreprocessor completed.
[01:09:46]: Always:
:LaunchExeSetup: Launching E:\SCOM setups\SCOM 2012\Setup\AMD64\SetupInstallItem.exe with arguments:
[01:09:46]: Info:
:SetProgressScreen: Init Exe Install progress.
[01:09:47]: Always:
:LaunchExeSetup: Install return value was: 0
[01:09:47]: Info:
:CheckPointPassed is removing the Rollback property as this is an uninstall.
[01:09:47]: Always:
:SetErrorType: Setting VitalFailure. currentInstallItem: Data Warehouse
Gautam.75801Hi All,
So i got the actual commands to register the SPN. So the above were wrong. Hope the below is useful for some one if the face the above issue.
In Windows Server 2008R2 – the command is SETSPN –A. In WS2012, it changed to SETPSPN –S which checks for duplicates before it allows you to create them.
Legend: SCOM Server - SCOMSVR.Contoso.com
DNS Domain: Contoso.com
SDK Account: SDKSVC
To add SPN for the SDK Service:
===================================
In Win2k 12
setspn -S MSOMSdkSvc/SCOM Server FQDN Domain\SDK Account name
setspn -S MSOMSdkSvc/SCOM Server name without FQDN Domain\SDK Account name
Ex: setspn -S MSOMSdkSvc/SCOMSVR.Contoso.com Contoso\SDKSVC
setspn -S MSOMSdkSvc/SCOMSVR Contoso\SDKSVC
In Win2k8
setspn -A MSOMSdkSvc/SCOM Server FQDN Domain\SDK Account name
setspn -A MSOMSdkSvc/SCOM Server name without FQDN Domain\SDK Account name
Ex: setspn -A MSOMSdkSvc/SCOMSVR.Contoso.com Contoso\SDKSVC
setspn -A MSOMSdkSvc/SCOMSVR Contoso\SDKSVC
To verify the SPN's
============================
1. setspn -L MS Host name without FQDN
Ex: setspn -L SCOMSVR
2. setspn -L Domain\DSK Action account
Ex: setspn -L Contoso\SDKSVC
Post entering the above commands you should see the entries of the Healthservice and not the entries of the SDK Service.
1. If you are are using a Domain account for SDK / DAS then that entry should not appear when execute the command “setspn -L SCOMSVR”. Where SCOMSVR is the name of the MS and it should be without FQDN.
Example: The below entry should not appear when you enter setspn -L SCOMSVR
MSOMSdkSvc/SCOMSVR
MSOMSdkSvc/SCOMSVR.contoso.com
If you get the above entries for "setspn -L SCOMSVR" then you need to delete and re add the SPN again and re check.
If you get Duplicate entries the below post entering "setspn -L Contoso\SDKSVC" then you need to delete the duplicate entries and re add the SPN again and re check.
Ex: MSOMSdkSvc/SCOMSVR
MSOMSdkSvc/SCOMSVR.contoso.com
MSOMSdkSvc/SCOMSVR.contoso.com
MSOMSdkSvc/SCOMSVR
To delete a SPN if required:
===============================
setspn -D MSOMSdkSvc/SCOM MS FQDN Hostname without FQDN Hostname
setspn -D MSOMSdkSvc/Hostname without FQDN Hostname without FQDN again
Ex: setspn -D MSOMSdkSvc/SCOMSVR.Contoso.com SCOMSVR
setspn -D MSOMSdkSvc/SCOMSVR SCOMSVR
Reference used : http://blogs.technet.com/b/kevinholman/archive/2011/08/08/opsmgr-2012-what-should-the-spn-s-look-like.aspx
Gautam.75801 -
Unable to apply GPO on 209 clients (RPC Issues)
I am in the process of cross forest DC migration with an environment of 400 users, first I have configured the GPO to add the dns suffix search domains to the
current clients of the old domain however upon applying policy I get The RPC server is unavailable or RPC was cancelled or access denied sometimes.
I have checked the domains (4) health , replication and all looks very well.
I connected to one of the clients that has an issue to make sure these clients are joined to the domain and using the proper DNS list. then checked if the domain
has the correct hostname as it appears in the domain and everything looked fine.
I disabled Kaspersky firewall on the client and disabled Windows firewall client but still the same issue occur .
When trying to connect to any of these clients with hostname to browse to the C$ folder it gives an error, I also tried with the FQDN and had the same problem
but with IP it connects fine.
I checked the RPC service, Computer browser service to see if they are running and they were running.
I am attaching screenshots of the GPO policy and the error that appears when trying to browse to the client folder C$ with hostname or fqdn.
I have tried the following but it didn't fix anything.. I hope someone could help point me out to the right direction
Checked DNS (Servers and clients)
Checked relative services (Netbios, RPC, Computer browser ..etc)
Checked firewall (Kaspersky and windows) and closed them both.
Checked connected DC on clients and pointed clients to different DCs to check if it'll solve the problem.
Checking DCs replication and health using DCdiag /v
Ran nltest.exe /sc_verify:domain.local and returned success ...
I am attaching
On one of the clients that have the issues I have also find this error on the event viewer.
This computer was not able to setup secure session with a domain controller in domain domain.local due to the folliowing "there are currently no logon servers available to service the logon request.
The weird thing is that the client have no issues and can logon to his computer which is a domain member without any issues.
thanks
Mohammed JHHi Vivian,
I found the problem, it was due to duplicated hostnames on the DNS for all these problematic clients! The DNS scavenging seems it's not working .. I would appreciate if you could assist me on how to troubleshoot the scavenging.
I have already applied the following checks
1- Checked the refresh and no refresh interval (both were 7 days and I changed them to 1 hour)
2- Restarted DNS.
3- Set DNS to automatic scavenging of stale records.
Still no sign of items are being deleted?
I would appreciate your help
thanks
Mohammed JH -
Is anyone doing disaster recovery for a J2EE application?
We generally use database log shipping to maintain a standby database for our ABAP instances. We can successfully fail over our production application to our disaster recovery site with no real issues. With the J2EE instances (EP, ESS/MSS, BI, etc), we have a few concerns:
hostname cannot change, without going through a system copy procedure, so we would have to keep the hostnames in DR the same. (for example, ref: oss note 757692 - changing hostname is not supported)
fully qualified domain name - from what I understand, there are potentially issues with changing the fqdn, for example SSO certificates, BSPs, XI has issues, etc.
we can't keep both hostname and fqdn the same between DR and production, or we could never do a DR test.
Has anyone implemented disaster recovery for any SAP J2EE application that has run into these concerns and addressed them? Input would be greatly appreciated regarding how you addressed these issues, or how you architected your disaster recovery implementation.
Regards,
David Hull
The Walt Disney CompanyI haven't done this personally, but I do have some experience with these issues in different HA environments.
To your first point: You can change the hostname, note 757692 tells you exactly how to do it. However like the note says, "Changing the name of a host server in a production system is not automatically supported by SAP." When it says "supported by SAP" I think it means SAP the company, not SAP's software. So I would contact SAP to see if this configuration would be covered under your service agreement. Then you have to think about whether you want to do something that isn't "officially supported" by SAP. Also I'm sure you'll need some kind of additional licensing for the DR systems as their hardware keys will de different.
To your second point: As for SSO certs (SAP Login Tickets), I think they should still work as long as the SID and client number of the issuing system remain the same. I don't think they are hostname or fqdn dependant. For BSPs I would think they would still work as long as they use relative paths rather than absolute paths. And for XI... I have no idea what kind of issues may arise, I'm not an XI guy.
Again, I haven't done what you're describing myself. This is just based on my HA experiences.
Hope this helps a little,
Glenn -
New inst: HP-UX: db2icrt fails: CLP frontend unable to get request handle
We are migrating our installations from the beautiful AIX to ... HP-UX. I am told I will learn to love it, but probably not until they update df to at least 1988 levels.
This is the pilot install. We have never seen this work before (and maybe no-one has...?)
sapinst runs correctly up to the "Create database instance" phase. At that point it dies with the following:
FUNCTION: DB2 UDB, command line process, clp_start_bp, probe:3
MESSAGE : CLP frontend unable to get REQUEST handle
DATA #1: Hexdump etc.
DBI1281E: The database manager configuration file could not be read initialized.
No further useful information is provided.
In db2<sid> I have a bunch of dot files (.profile and the like) and the db2_software directory containing the database installation.
During the create database instance phase, I can see that directory sqllib is created, but it is deleted when the phase fails.
There is no litter of any kind in the /db2/<SID> directories, - nothing has been done at all.
I have done the following: <<imagine nice bullets below - they dont seem to be available here>>
checked that the permissions on /tmp and the installation direcctory (redirected by setenv TEMP /usr/sap/install) are 777: they are;
checked the OS parameters with db2osconf - they are good
checked the host name resolution with a perl script - gethostbyname and gethostbyaddr agree.
the ip address, simple hostname and FQDN are on a line in the hosts file
there is no litter from previous installations - this is a clean machine
I could not find any reference to required environment variables (such as LD_LIBRARY_PATH) in the install guide or the install note - so I have not set any.
I have been hacking away at this for days. I have put in a call to SAP, who will get back to me after dark (of course...)
This seems to be a massively popular problem, and the helpful error message ("Sorry, Sport, just can't bring myself to do it") seems to have people jumping from tall buildings and in front of busses all over Google-world. Furthermore there also seems to be a near-infinite number of possible causes and none of them seem to apply here.
H-PUX version is 11.31. DB2 is 9V5 patch 4. sapinst is latest available. Weekend is fading fast...
Edited by: Russell Day on Mar 5, 2010 7:46 AM>
Paul Power wrote:
> Hi Russell,
>
> Apologies if some of this has been already tried but please check the following points:
>
> Make sure the machine name is listed in its hosts file.
>
> Make sure to log on directly to root. ie: do not su to root from another without '-'
>
> Make sure there is no instance created already (find / -name sqllib) for that user
>
> Using ps -aef and ipc -a, no old db2 ressources should be displayed for db2 instance owner. If there are any, kill/remove it
>
> You should make sure, that LIBPATH and LD_LIBRARY_PATH of root and db2 instance owner does not point to an path of another db2 version
>
> Regards,
> Paul
No need to apologise for assisting, Paul, but I have dealt with most of these.
The host file contains the unqualified and fully qualified hostnames, on the same line, unqualified first.
I am logging in as root (because there were no other users, and I'm old school, from when everyone logged on as root to do everything.
There is no instance, and in fact there is no sqllib except when the "create database instance" step is running.
The only detectable db2 process running is db2fcmd
I have not been able to find any instructions regarding LD_LIBRARY_PATH and LIBPATH for HP-UX. They are not mentioned in the installation guide at all. I cannot find it in any of the installation notes. I presume sapinst is setting them itself before they are needed. Neither are set in the enviroment of db2<sid> or <sid>adm. I have gnawed my fingernails to the elbow over this one, but I cannot see any indication that either should be set for HP-UX. Anyway, they are definitely not set anywhere, to anything. This was a clean machine before I started chopping it up to do this install.
I figure it must be complicated - I have been trying to get an answer for 10 days already. I will absolutely hate myself when it turns out to be something obvious, documented in 10 places, mostly in bold italics. I shoulda taken my dads advice and been a riverboat gambler or a piano player in a cathouse - its a lot less complicated,
Maybe you are looking for
-
Report O/P in graph.(all in one vetical line).
I want outpout in graph ..my requirement is i have to create a report equipment wise calculating oee in graphical format. suppose i had a equipment ..in my report i have to calculate its idle time ,maintaince time and number of batches processed thr
-
Error code 0xe0ef0003, No "BOOTMGR" after a system restore, no disc/self system.
So ... my HP Pavilion dv7 NB, that I've owned just a mere two days shy of three years, decided to get extremely lazy late last night. I have malware programs in place, strong security, etc. but I suppose that something might have slipped in ... but u
-
Sharing Itunes on the same Computer with 2 users
This is probably really basic - I have created a second user account on my puter and no matter what I do to allow access to Itunes the second user cannot access the files. I have copied the files and placed them in the music folder (twice) for that u
-
Work path of 'hollow' characters?
How do I make a work path of a character that consists of a loop (letters O, O, and P in LOOP for example) so that i get the inner and outer walls of a character, take O for example, instead of a solid O? O (the black area of the O should be filled w
-
what does skinning means in adobe flex?