"X-Axis Scaling setting "by user in a chart

hi
i want to visualize multiple number of plots ín a chart. futhermore for this graphical display there should be manually control for x and y axis. that means there should be numerical control field where we can write 200 ms second and it should only display data for 200 ms sec. in this vi when i run, it display wierd number. i can not set the x axis for example 0-200ms.
i hope you understand .thanking for your kind help
BR
kalu
Attachments:
high speed data.vi ‏11 KB
high speed data.vi ‏11 KB

You aren't setting the x axis range to anything. You need to write to the Xscale.Range.Maximum property. And, if you want the scale in seconds, you need to change the scale formatting and set the offset and multiplier properties. Look at the example called real-time chart.

Similar Messages

Vertical axis scaling problem with XYZ bar/line chart

Post Author: satwar
CA Forum: WebIntelligence Reporting
Is there a trick to making the scaling on the
Z-axis equal to the Y-axis. I don't want to specify the scaling on
either axis because I am generating report with filtered "dimensons" in
order to generate all measure charts for a given set of filters. The
measures have various value ranges so by not specifying chart scales,
the Y-axis is auto ranged, which is good, but so is the Z-axis, which
is bad. I want both Y & Z axis to range together so I get a good
visual comparison of the two measures being plotted.

Post Author: jsanzone
CA Forum: WebIntelligence Reporting
satwar,
There is no "trick", we're just victims of the limitation that WebI has in portraying XYZ type charts to our better liking. I submitted a request to Business Objects Tech Support in Oct 2006 and became the proud holder of two ADAPTs:
ADAPT00676587 u2013 for the scaling issueADAPT00676609 u2013 for the stacked bar chart, line graph issue
When fully implemented, the scaling for Y and Z should be able to correspond to each other. For instance, max value of Y and max value of Z will set on both scales the same max value. I don't discourage you from submitting a trouble-ticket, perhaps if they get more noise on this situation they'll resolve my (our) ADPAT sooner, but just hoping....

Manual X axis scaling

Hello,
I would like to scale x axis manually. For example, the x axis data will be like this:
70
71
72
73
74
75
110
111
112
113
160
161
162
As a result, there will be a gap between 75 and 110 (also between 113 and 60). In order to diminish the gap, I have to config the x scaling like 70...75, 110...113, 160...162. Is it possible to solve this problem?
Thanks
kind regards,
zhiyao

Hi zhiyao,
There is no configuration setting in DIAdem to do this with one axis system. What you could do if you wanted to solve this without programming would be to place two axis systems side by side (one on the left, the other just to the right of it), then configure their x axes accordingly:
[ 70, 71, 72, 73, 74, 75 ] [ 110, 111, 112, 113 ]
In the example you listed, you would need 3 axis systems.
If you're willing to program the solution, then you can change only the x axis numbering with a user command that is placed in the format string of the x axis text, but this does not affect the way the values are graphed. In that case you would need to plot the data vs. array index, so that the real x axis always ran [1, 2, 3, 4, ...], but you could change the display of the x axis to match the real x values, stored in the x channel [ 70, 71, 72, 73, 74, 75, 110, 111, 112, 113, 160, 161, 162 ]. Type "CFV" into the search field of the DIAdem Help to see more on the subject of changing the x axis display using the CFV variable in the x axis format string.
Ask if you have further questions,
Brad Turpin
DIAdem Product Support Engineer
National Instruments

2D Axis Scaling Bug in Reports (DIAdem 2014)

Hello,
I've run across a rarther annoying bug in the 2D axis scaling for Reports. Here's how to recreate it:
Load a dataset that has x and y components.
Create a new layout in the Report tab
On Sheet1, add a Simple 2D Axis System.
Select x and y from the dataset and drag it into the 2D axis system.
Change the scaling mode from "Completely Automatic" to "Manual."
Change the "Begin" number to something close to the default DIAdem has set. Do not touch the "End" number. Click OK.
Add Sheet2 and repeat steps #3 thru #6 on Sheet2 with a different dataset.
Both plots look good right now...
Go to Sheet2 and double click on the chart to bring up the Curve and Axis Definition.
Don't touch anything...just click "Cancel."
After clicking Cancel, the scaling of the 2D axis completely changes. I believe what happens is that DIAdem takes whatever the previous "End" number was and uses that instead of the "End" number you want. Also, you don't actually have to go into the Curve and Axis Definition to create this bug. Press cancel while editing anything like text (for example)...bye bye plot.
Moreover, if I go back in and set the scaling mode back to Auto, click preview to refresh the plot, then switch the mode to Manual, everything looks good. However, if I copy Sheet2, the plot on Sheet2_Copy1 is messed up the same way as if I hit Cancel but Sheet2 is OK.
Worst of all, the undo function does not work on this unwanted scaling change.
This is a bug that makes plots in the Report files almost unusable. I hope this is re-producable on other systems so a patch can be issued. Let me know what you find.
The only workaround I've found is to click OK instead of Cancel, which isn't always preferred.
Thanks,
Jacob
Solved!
Go to Solution.

Hello jrasco,
You are right. This is a bug in DIAdem 2014. We fixed it for the DIAdem service pack.
This is the link to the English DIAdem 2014 SP1
Thank you
Walter

PlotXY manual X Axis Scaling doesn't rescale Y-Axis auto-scaling

I'm using PlotXY(..) to display data on a graph.
I use SetAxisScalingMode(...) to set set VAL_LEFT_YAXIS to VAL_AUTOSCALE.
I use SetAxisScalingMode(...) to set set VAL_TOP_XAXIS scaling to VAL_MANUAL.
I make various calls to SetAxisScalingMode(...) which change the min & max values for the X-Axis.
Everything thing seems to display correctly except that changing min & max values using manual scaling on the x-axis does not seem to change the range of data used to auto-scale the y-axis.
For example say you have a peak in your data that you want to exclude so the auto-scaling on the y-axis will zoom in.
So you change the max, min manual x-axis scaling to leave out the peak but scaling but the y-axis scaling doesn't change.
Is this the way it should work?
Ideas for a work around?
Thanks,
Kirk

Hi Kirk,
As you've noticed, the autoscaling of an axis in the graph is based on the entire data of each plot, not just on the portion of the plot that is within the range of the other axis.
If you use only integer limits for the min and max of the x axis, if you plot only 1D arrays, and if you don't mind re-plotting every time that you want to manually change the x-axis, there's a possible workaround, consisting of replacing PlotY with PlotWaveform, so that you can offset the data to plot.
I've adapted the code that you attached earlier to illustrate this:
int xmin = 40;
int xmax = 90;
SetAxisScalingMode(handle, PANEL_GRAPH, VAL_BOTTOM_XAXIS, VAL_MANUAL, (double)xmin, (double)xmax);
PlotWaveform (handle, PANEL_GRAPH, datapoints + xmin, xmax - xmin, VAL_DOUBLE, 1.0, 0.0, xmin, 1.0,
style, VAL_EMPTY_SQUARE, VAL_SOLID, 1, color);

Chart y axis scaling using msum

hi,
Is there any possibility to change the y-axis(sales- msum) range in the charts? I did search, but couldnt find the proper answer for this.
Let us say I have my y-axis sales range 0 - 1million, but dont have any values under 0.8million. So I want to keep my chart y-axis range starts from 0.8million. I have the sales in the chart that is calculated using msum.
Is there any such option to customize the y-axis scale ?
Thanks,
Mani

Hi Mani,
You can do that by setting minimum value and maximum value in Axis scaling tab(middle tab in 5 tabs for chart ) in chart view.
Thanks
Sandeep

How to set Current User in moss 2007 for Authentication....

Hi Team,
We have current running website where we have user id to login but now requirement is that user will login with his Email address. Email is stored in active directory, I'm able to login with fba authentication.
I'm able to retrieve the user id of current user using Email but
I am NOT able to set that user id for current user for further authentication using Moss 2007.
Please find the source code for login and authentication page:
//---------------------------Login Page--------------------//
public partial class Login : System.Web.UI.UserControl
#region Decleration
string LoginStatus = null;
string UserCurrent = null;
static SPUser siteuser;
// private static string _randomNumbercheck;
//private static bool IsLoggedin;
Random random;
#endregion
#region Page Load
protected void Page_Load(object sender, EventArgs e)
this.hplchangepw.Visible = false;
this.hplmytask.Visible = false;
string desturl = SPContext.Current.Site.Url;
if (!IsPostBack)
try
string str;
SPWeb web = SPContext.Current.Web;
SPUser siteuser = web. .CurrentUser;
//SPUser siteuser = spWeb.EnsureUser(username);
str = (siteuser == null ? "" : siteuser.ToString());
this.Login.TitleText = "";
this.Login.DestinationPageUrl = desturl;
//if (HttpContext.Current.Request.UrlReferrer != null)
// if (this.Page.User.Identity.IsAuthenticated && ((Session["test1"].ToString() == _randomNumbercheck) || LoginControl.Class1.IsLoggedIn))
if (this.Page.User.Identity.IsAuthenticated)
// _randomNumbercheck = "";
this.hplregister.Visible = false;
this.hplforgetpassw.Visible = false;
this.hplchangepw.Visible = true;
this.hplmytask.Visible = true;
this.Login.Visible = false;
if (str.StartsWith("fba_"))
string name = str.Split(':').GetValue(1).ToString();
LoginnameLbl.Text = "" + name.ToString() + ", Haryana Urban Development Authority Welcomes
You. \"In The Service Of Masses\"";
else
string name = str.Split('\\').GetValue(1).ToString();
LoginnameLbl.Text = "" + name.ToString() + ", Haryana Urban Development Authority Welcomes
You. \"In The Service Of Masses\"";
else
this.hplchangepw.Visible = false;
this.hplmytask.Visible = false;
this.Login.Visible = true;
LoginnameLbl.Text = "";
HttpContext.Current.Session.Clear();
HttpContext.Current.Session.Abandon();
catch (Exception ex)
//HttpContext.Current.Session.Clear();
//HttpContext.Current.Session.Abandon();
#endregion
#region Get Audit Informations
public void GetUserInfo()
try
string user = Login.UserName;
SPSecurity.RunWithElevatedPrivileges(new SPSecurity.CodeToRunElevated(delegate()
using (SPSite oSite = new SPSite(SPContext.Current.Site.ID))
using (SPWeb web1 = oSite.OpenWeb(SPContext.Current.Web.ID))
SPListItem item = null;
SPListItemCollection listItems = null;
web1.AllowUnsafeUpdates = true;
siteuser = web1.EnsureUser(Session["User"].ToString());// spWeb.EnsureUser(login);
listItems = web1.Lists["Audit_Trail"].Items;
item = listItems.Add();
item["User_ID"] = UserCurrent.ToString(); //Request.ServerVariables["AUTH_USER"];
string ip = Request.ServerVariables["HTTP_X_FORWARDED_FOR"];
if ((ip == null) || (ip == "") || (ip.ToLower() == "unknown"))
ip = Request.ServerVariables["REMOTE_ADDR"];
item["IP_Address"] = ip;
item["Login_Date"] = System.DateTime.Now;
item["Login_Status"] = LoginStatus.ToString();
item.Update();
web1.AllowUnsafeUpdates = false;
web1.Dispose();
oSite.Dispose();
catch (Exception ex)
#endregion
#region MD5Encryption
private string MD5Encryption(string strToEncrypt)
System.Text.UTF8Encoding ue = new System.Text.UTF8Encoding();
byte[] bytes = ue.GetBytes(strToEncrypt);
// encrypt bytes
System.Security.Cryptography.MD5CryptoServiceProvider md5 = new System.Security.Cryptography.MD5CryptoServiceProvider();
byte[] hashBytes = md5.ComputeHash(bytes);
// Convert the encrypted bytes back to a string (base 16)
string hashString = "";
for (int i = 0; i < hashBytes.Length; i++)
hashString += Convert.ToString(hashBytes[i], 16).PadLeft(2, '0');
return hashString.PadLeft(32, '0');
#endregion
#region Generate Random Code
private string GenerateRandomCode()
random = new Random();
string s = "";
for (int i = 0; i <= 6; i++)
s = string.Concat(s, this.random.Next(10).ToString());
// _randomNumbercheck = s;
return s;
#endregion
#region Generate Random String
public string GenerateHashKey()
StringBuilder myStr = new StringBuilder();
myStr.Append(Request.Browser.Browser);
myStr.Append(Request.Browser.Platform);
myStr.Append(Request.Browser.MajorVersion);
myStr.Append(Request.Browser.MinorVersion);
myStr.Append(Request.LogonUserIdentity.User.Value);
SHA1 sha = new SHA1CryptoServiceProvider();
byte[] hashdata = sha.ComputeHash(Encoding.UTF8.GetBytes(myStr.ToString()));
return Convert.ToBase64String(hashdata);
#endregion
#region Check User Authentication
protected void Login_Authenticate(object sender, AuthenticateEventArgs e)
Utility hu=new Utility();
int CheckValue = 0;
string user = Login.UserName;
if(user.Contains("@"))
CheckValue=1;
//Encrypted Password
string HPassword = hash.Value;
// Verify that the username/password pair is valid
SqlConnection con = new SqlConnection();
SqlCommand cmd = new SqlCommand();
con.ConnectionString = System.Configuration.ConfigurationSettings.AppSettings["FBAPortalConnection"];
if (con.State == ConnectionState.Closed)
con.Open();
cmd.CommandType = CommandType.StoredProcedure;
cmd.CommandText = "sp_Portal_ValidatePortalUser";
cmd.Connection = con;
cmd.Parameters.Add("@ID", SqlDbType.NVarChar, 256).Value = Login.UserName;
cmd.Parameters.Add("@Password", SqlDbType.NVarChar, 300).Value = HPassword.ToString();
cmd.Parameters.Add("@CheckVal", SqlDbType.Int).Value = CheckValue;
cmd.Parameters.Add(new SqlParameter("@P_Return", SqlDbType.NVarChar, 256));
cmd.Parameters["@P_Return"].Direction = ParameterDirection.Output;
cmd.ExecuteNonQuery();
string CurrentUserName = cmd.Parameters["@P_Return"].Value.ToString();
cmd.Dispose();
con.Close();
//int x = hu.ValidatePortalUser(Login.UserName, HPassword.ToString(), CheckValue);
if (CurrentUserName != "0")
Page.Session["User"] = CurrentUserName;
string UserName = Session["User"].ToString();
UserCurrent = UserName;
LoginStatus = "Successfull";
GetUserInfo();
e.Authenticated = true;
//Session["CustomAuthKey"] = MD5Encryption(Request.ServerVariables["Remote_Addr"] + Request.ServerVariables["Http_Cookie"] + Request.ServerVariables["Auth_User"]);
Session["CustomAuthKey"] = MD5Encryption(Request.ServerVariables["Remote_Addr"] + Request.ServerVariables["Http_Cookie"] + UserCurrent.ToString());
FormsAuthenticationTicket tkt;
String cookiestr;
HttpCookie ck;
tkt = new FormsAuthenticationTicket(1, UserName, DateTime.Now, DateTime.Now.AddMinutes(15), false, GenerateHashKey());
cookiestr = FormsAuthentication.Encrypt(tkt);
ck = new HttpCookie(FormsAuthentication.FormsCookieName, cookiestr);
ck.Path = FormsAuthentication.FormsCookiePath;
Response.Cookies.Add(ck);
else
// Username/password are not valid...
Login.FailureText = "Invalid Username / password";
e.Authenticated = false;
#endregion
#region Login Error
protected void Login_LoginError(object sender, EventArgs e)
// Determine why the user could not login
Login.FailureText = "Your login attempt was not successful. Please try again.";
// Does there exist a User account for this user
MembershipUser usrInfo = Membership.GetUser(Login.UserName);
if (usrInfo != null)
// Is this user locked out?
if (usrInfo.IsLockedOut)
Login.FailureText = "Your account has been locked out because of too many invalid login attempts. Please contact the administrator to have your account unlocked.";
else if (!usrInfo.IsApproved)
Login.FailureText = "Your account has not yet been approved. You cannot login until an administrator has approved your account.";
else
Login.FailureText = "Invalid UserName / Password";
UserCurrent = usrInfo.UserName;
LoginStatus = "UnSucessfull";
GetUserInfo();
else
Login.FailureText = "Invalid UserName / Password";
#endregion
#region Logged In
protected void Login_LoggedIn(object sender, EventArgs e)
string UserName = Session["User"].ToString();
LoginControl.Class1.IsLoggedIn = true;
//If User Email is [email protected] it will be invalid. Prompt the user to update the email id.
LoginControl.Utility hu = new LoginControl.Utility();
DataSet dsuser = hu.getUserDetails(UserName);
string email;
if (dsuser.Tables[0].Rows.Count > 0)
email = dsuser.Tables[0].Rows[0]["Email"].ToString();
if (email.Equals("[email protected]"))
Response.Redirect("/Pages/UserUpdates.aspx", true);
else
#endregion
//-------------------------------- Authentication code----------------------------//
private void authenticateuser()
try
if (SPContext.Current.Web.CurrentUser != null)
using (SPSite spSite = new SPSite(SPContext.Current.Site.Url))
using (SPWeb spWep = spSite.OpenWeb())
Utility hu = new Utility();
_userid = spWep.CurrentUser.Name;
DataSet ds = new DataSet();
ds = hu.GetPlotid(_userid);
if (ds.Tables[0].Rows.Count > 0)
_plotid = ds.Tables[0].Rows[0]["plotid"].ToString();
else
if (!SPContext.Current.Web.UserIsSiteAdmin && !SPContext.Current.Web.UserIsWebAdmin)
if (!SPContext.Current.Web.IsCurrentUserMemberOfGroup(SPContext.Current.Web.Groups["Allottee"].ID))
SPUtility.HandleAccessDenied(new Exception("You do not have access to this page"));
else
{ SPUtility.HandleAccessDenied(new Exception("Please login")); }
catch (Exception ex)
// lblMessage.Text = "Error:" + ex.Message;
ShowMessage("Following error has occured while executing the desried event :- " + ex.Message);
Mohan Prakash

1. Current work flow :-In web site the user have to register themselves in the web site and enters his details along with user id, password and email id. Once user
is registered then he will login with his user id and password. The user id is picked from login control and that set in “SPWeb.CurrentUser” as user id and system uses "Membership.ValidateUser" method to Authenticate user for login.
2. New Requirement: we would like to facilitate the user to login with Email id as well as user id.
Problem:
We replaced "Membership.ValidateUser" method to our own method to Authenticate user with email id/user id and password.
When user is login with user id and password it is working successfully but in the case of email id and password –“the email id is picked from user control and set as
"HttpContext.Current.User.Identity.Name" but we are not getting “SPWeb.CurrentUser” and it shows null value.”
We are able to get user id from database using email id of user. Please help us how we can set user id in "SPContext.Current.Web.CurrentUser".
Mohan Prakash

User Valid to changed while assigning role to a set of users in SU10

Hi All
I had a task of assigning a role to a set of users in various systems across landscape. I find that some of the users had their valid to date (logon data tab) changed to their last login date. Moreover, in every system; the list of user ids who had this issue of valid to date changed to their last logon date is different. It seems it occurs randomly in various system but out of every 10-11 users 3-4 get affected with this issue. Has anyone faced such an issue before and how could we resolve this issue.
Many thanks for your help and time !!
Best Regards
Prashant

Have you checked OSS notes? Maybe note 1325775 may be relevant for you.
Cheers

How to restrict manual setting of User Status?

Hi,
I have created an User Profile where a particular User Status is "set" based on the Business Transaction "Release".
However, we are also allowed to set this User Status manually without carrying out the Business Transaction "Release".
How do I restrict manual setting of those User Statuses that are "set" based on a Business Transaction?
Raj

Pete,
I did read that post. But it is about providing authorisation to set a Status for an User.
The case I am referring is, an User Status is auto set by a Bus. Trans Release. But I am also permitted to set the status transition manually. This way, Users tend to skip Releasing the Service Order. This is affecting upstream processes.
Is there a way where we can restrict manual setting of User Statuses that have to be normally auto set by Bus. Transactions?
Raj

How to set default User preferences in Analyzer for all users

How to set default User preferences in Analyzer for all users Hi, I would like to set some settings in Analyzer as default for all users. For example: 1. Display | Char 2. right mouse click on char | Chart Properties 3. Axes tab 4. "Format: Currency" i would like to change to "Format: Number". How to set default values to all users? Is this possible? Thanks, Grofaty

I'm pretty sure higher access superceedes, so you could set up a group with no actual access, just to get the preferences working, then their individual security will dictate what they can do. I haven't tested this fully, but I beleive this is how it will work. As far as setting the preferences, go into the admin console and right click on the group, then select Preferences. To apply the group preferences to a user, add the user to the group, then right click on the user, select preferences and from the upper left corner, use the drop down to select the active preference, in this case, it will be the group you created and added them to. HTH

How to set the user's Default joboptions directory?

Hello Experts,
When we installed Acrobat Pro 8.x on our Win XP Pro systems our systems were NOT in a Windows Domain. At that time the default location for user-created/customized joboptions files was:
C:\Documents and Settings\<Username>\Application Data\Adobe\Adobe PDF\Settings
where <Username> is the name of the LOCAL Windows user.
A few years ago we migrated to a Windows Domain and converted our LOCAL users to domain users and disabled, but did not delete, the LOCAL user's account. We did not remove the LOCAL user's Documents and Settings directory structure either.
Our users now log into a DOMAIN rather than the LOCAL account.
As a result of that process the user's Documents and Settings directory structure changed to;
C:\Documents and Settings\<Username.DOMAINNAME>
where DOMAINNAME is, of course, our Windows Domain Name.
Now we are beginning to use Acrobat Distiller joboptions and I notice that when Acrobat/Distiller goes to save a user-created/customized joboptions file the default location has remained;
C:\Documents and Settings\<Username>\Application Data\Adobe\Adobe PDF\Settings
which is NOT the user who is logged in
Acrobat/Distiller should use the Documents and Settings directory of the user who is actually logged in which is;
C:\Documents and Settings\<Username.DOMAINNAME>\Application Data\Adobe\Adobe PDF\Settings
This anomaly has created some confusion and appears to have created a dependency of the old LOCAL user's Documents and Settings directory preventing us from deleting it.
Question:
How can we force Acrobat/Distiller to use the Documents and Settings directory of the logged in user (eg: the Domain user)?
In other words, how do we set the user's default joboptions directory?
Pointers/tips/and tricks are most welcome.

if the user is the one running the program, you can always get the home directory using System.getProperties ("user.home");
If you are trying to get the properties of another user, you could try using setProperties to change the user name first, before getiting the home directory, but it probably won't work because of the security manager. You could read the /etc/passwd file and parse the path out, but once again, the user of the code would have to have appropriate permission.

How to set Multi User Environment in the weblogic 5.1 and 6.1 server..(Urgently)

Hi all,
I need to know how to set Multi User Environment in the weblogic 5.1
properties file..
Here my question is..:)
1) I have a database with multiple users and having different privileges
for the users.. and i need to use all the privileges when user aceess
the database through weblogic server connectionPool.
2)According to the user privileges i need access the database tables
content and gives the frontEnd(jsp).
3)How to modify dynamically weblogic.properties file in the weblogic
5.1.
If anybody having idea reg. this issues pl...help me..
Thanks in advance
Chandu([email protected],[email protected])

Hi. A JDBC connection pool is a set of identical, interchangeable, pre-made
connections, and the controls to make sure only one user uses a particular
connection at any one time. If you want to have different DBMS users, you can
have a separate pool for each DBMS user, which may contain as many or few
connections as you want. Some applications has a pool for the accounting
applications, and another for the sales applications etc. Some do have a
separate pool for john, jane, joe etc, each with one connection. Pools
can be created and destroyed dynamically using the dynamic pool API.
Joe
softstar wrote:
>
Hi all,
I need to know how to set Multi User Environment in the weblogic 5.1
properties file..
Here my question is..:)
1) I have a database with multiple users and having different privileges
for the users.. and i need to use all the privileges when user aceess
the database through weblogic server connectionPool.
2)According to the user privileges i need access the database tables
content and gives the frontEnd(jsp).
3)How to modify dynamically weblogic.properties file in the weblogic
5.1.
If anybody having idea reg. this issues pl...help me..
Thanks in advance
Chandu([email protected],[email protected])

Data Slice dynamic activation and deactivation for a set of users

Hi Experts,
                 We have requirement to manually enter the data into RTC using IP.
There are 2 sets of users --> Power Users and Normal Users.
We need to allow the normal users to enter the data only from 1st to 5 th working day of every month.
Power Users should have authorization to edit and enter the data at any time.
Can any one suggest how to set the dataslice using code.
Regards,
Shashi

Hi.
Please note that update of RSPLS_DS table do not affects at RUNTIME.
If you want to create dataslice that activated and deactivated within sequence run you should do the next:
1. Create exit variable that return you all working days EXCEPT 1 to 5 of each month.
2. Create dataslice in modeler on this characteristic with restriction by this exit variable.
3. This dataslice should be based on ABAP class as described [here|https://www.box.net/shared/zhirrvk859].
4. In mydataslice method enter following code (I assume you have any DSO with definition whether user is power user or not. Lets say DSO has next structure:
USER   | Z_IS_POWER   |
aaaa    | NO
bbbb    | YES
Enter the next code in mydataslice method:
SELECT Z_IS_POWER FROM YOURDSO INTO lv_POWER WHERE USER=sy-uname.
IF sy-subrc = 0. *This is SUPER USER. Allow locked data edition
e_noinput = rs_c_false.
ELSE. *This is regular user. Do not allo locked data edition
e_noinput = rs_c_true.
5. Create in modeler 2 planning sequences for activating and deactivation dataslice as described in document.
6. Each time you want to do something with locked data run first sequence for deactivation of dataslice. If super user will run it so dataslice will be deactivated, but if regular user - dataslice will lock the data.
Regards.

Setting dynamic user in Approval task

While setting the user at runtime for approval task, I have created a Task Assignment adapter and associate the adapter in the assignment tab for the approval task. I have used reassignApprovalTasksToUser method of tcRequestOperationsIntf class. I have passed the task instance id as well as the user key. From the system console I am able to find that the adapter is invoked.
I have suppress the standard approval process using tcComplete task adapter.
When the requestor make the request and goto approval details page the system is showing the request is pending to the re-assigned user however when I login into the console using re-assigned user credential no request is pending in his work busket. What I observed, the request is pending in xelsysadm work busket.
Would appreciate if someone let me know the step which I am missing.

Yes, I suppressed the "Approve" Task in standard approval process.
Can you please let me know how to mapped the key type in the task assignment adapter.
I have created two variables in the adapter and mapped those two variables from the assignment tab of the approval task.
I have seen there are two more variables in the Adapters, "Adapter return value for Key type" and "Adapter return value for Key" and these two adapter variables are mapped as "Set at runtime".
How do I map these two variable?
No I do not find any exception with regard to execution of the task assignment adapter in the log.

Can i set multiple users for 1 ipad

I got my wife an Ipad. I want to know if I can set 2 users on it?

No. iOS is not a multi-user operating system. You can use
web-based email to keep your accounts separate and private,
but you can not have different logon environments like on
a desktop or laptop computer.

"X-Axis Scaling setting "by user in a chart

Similar Messages

Maybe you are looking for