X-Fi Titanium Champion Series. Folloup, Turns OUT STATIC NOT CREATIVES FA

Well I came on and posted a couple of threads. One was about the four new cards I had purchased (All new Titanium PCI-E Cards) which had redicules amount of static in everything. Some examples:
.) Explosions in games huge static
2.) Watching videos online and scrolling up and down caused static
3.) General Windows Audio Static
Im not 00% which resolved it. Firstly I have the Asus Striker II Extreme Motherboards, Upgraded to the 03 series Bios, and the new September set of nforce/geforce/ntools drivers for the 9800 GX2s. After reinstalling windows, the static was gone. Previously I had static at this point. However once I installed the ACPI update from windows update, the static returned. Reinstalled windows and didnt install this one update and statics gone.
Im using the Drivers right off the cd, turns out "This isnt the fault of Creative Labs". I was trolling them before blaming them stating its the first Creative Card Ive used thats ever given me problems, now I know I trolled the wrong guy and creative as always does maintain and make an awesome product

Its interesting really, the SupremeFX II in the same PCI-E slot doesnt get any static. Ive had to remove the Titanium PCI-E and use the onboard to stop static when using SLI.
I use to get static with SLI off but it looks like the most recent BIOS from asus along with all the latest drivers from nvidia seemed to fix this however in SLI the problem still exists
I dont feel as though this is creatives problem is the non sli static was fixed with nvidia drivers

Similar Messages

X-Fi Titanium Champion Series I/O Drive problems

0X-Fi Titanium Champion Series I/O Dri've problems? This is my final attempt to resolving this before?I request an RMA. I'm really hoping someone can help me figure out if my I/O dri've on my x-fi titanium Ch. Series is defecti've or it's a?software related problem. I don't get any sound from the headphone or mic jacks on the front dri've using headphones or headsets. The volume knob does?lower or raise in the Console Launcher?when I turn it and?as for the mic volume, I'm not sure. The LED's don't?light up at all, but if I press the Game Mode, CMSS-3D or Crystalizer I see them switching on the Console Launcher. The rear component does work as I can connect my speakers and get sound. I'm running Vista x64 Ult. Sp2 with the latest beta drivers 2.8 from daniel_K's support pack. I have uninstalled and reinstalled several times also removed and replugged the device incase of a connection problem. I've searched all over these forums and googled several keywords and can't find a solution. Can anyone point me to the right direction? Is this a common problem with the front dri've? I've read various posts about customer technical support being useless so I'm not even wasting my time with that. Any help is greatly appreciated. Thanks

I had this exact same problem for a very long time, but after recently taking apart my machine to dust it out and whatnot I decided to have a go at plugging the device in again, and found that in order to plug it in properly for that larger connector you have to push it in really hard for it to go in all the way, to the point where it hurt my finger to do so. But after I did this (I had the card out while doing it, as it seemed impossible to get the connector in all the way otherwise) the lights and ports worked properly.
Hopefully it's this simple for you, but I can imagine it is due to the fact your problem was word for word exactly the same as mine.

Sound Blaster Titanium Champion Series

&?Hello,
I recently bought a Sound Blaster Fatality Titanium Champion series cound (the one with the front panel included).
Sound and everything seems fine. One very annoying issue (not for me but mainly for the other people who are listening to me on Ventrilo) is that they hear a constant "buzzing" noise when I speak. I can't seem to get rid of it.
It was actually worse before as I was able to hear the constant buzzing too. Until I unplugged the mic and audio jack from the back sound card and plugged it into the front panel instead.
I also updated to the latest drivers as far as I can tell.
Any idea on how to fix this?
I am using a Sennheiser PC360 Headset. I don't believe it is the headset's issue, it works fine on my other systems without the constant buzzing.
Many thanks in advance.

Eljher,
Sorry about that, Customer Support do not monitor these boards. Please write to them here.

Is there any where that I can voice why I returned my beloved new Ipad? I was told I could move my Keynote presentations to it and then use it for my business presentations. Unfortunately that turned out to not be true. I need the IPad to work with a remo

Is there any where that I can voice why I returned my beloved new Ipad? I was told I could move my Keynote presentations to it and then use it for my
business presentations. Unfortunately that turned out to not be true. I need the IPad to work with a remote.
The Ipad is on a short cable to my projector. I am usually on a podium 30 feet away. No infra red receiver on the IPad and
the Iphone remote needs wi fi which is not always available in all the locations I do my teaching and lecturing in.
If you can build a remote into the Ipad in the future I would really like to use an Ipad to replace my heavier lap top for business travel. Thank You Kathy McNeil.

"The Ipad is on a short cable to my projector."
Get a longer cable?

Problem with console launcher and Titanium Champion Series

Hi all. I've recently got a X-Fi Titanium Fatality Champion Series, it's running on XP. As you know with the original drivers the I/O front panel didn?t work on XP, so I updated to the latest version 2.7.8. The problem is that now the I/O front panel seems to work, but the console launcher has been updated too to the 2.6.1.45 version and it's not working properly, when previously it was. I?ve detected two problems:
1) You can enable the equalizer on any mode but the list of presets (rock, pop, jazz...) don?t appear
2) The console launcher crashes in the very moment you click on the Mixer thumb index, at least in Game mode, appearing an error message
I would thank any help. Bye.

Well, given I've still not received an answer, I think this may help somebody with the same problem.
I decided to install the Console Launcher 2.6.1.49 (beta) and it's working perfect so far, the two problems I told about have been fixed.
Another problem I had with the latest official drivers was that the volume panel wasn't shown at the taskbar. I simply fixed it by installing the original volume panel you can find in the installation CD.
Bye.

Soundblaster Titanium Champion Series

% I have installed this product three different times, i have disabled all on board audio devices. i get the following message when i try to open the console;
the current selected audio device is not supported by the application. do you want to select another audio device now. i have installed the latest drivers from the website but still no luck, please help!

)? Upon installing my X-FI Titanium, both Vista and Vista 64 install a very basic "High Definition Multimedia controller" name and driver that does indeed give you sound. What I did was run the driver install from CD and only the driver nothing else. Then the proper Creative driver is listed in your control panel and you can install and use any new updates you wish. If you install the Daniel k 2.0 support pack here........http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&thread.id=425. it does it for you, as well as install a beter, tweaked and more compatible set of applications for your system. After installing Daniel K's pack you can "overlay" or install any newer Creative updates after and this works best for me, where I install 2.0 support pack, then the newest Console launcher update from Creative and lastly, their newest driver which works great for me with the above named applications.

X-Fi Titanium Champion Series VS. Online Karaoke

I have recently acquired the X-Fi Tatinium and sastified with the sounds it provides from my Karaoke mixer through Aux In and out to my Intergra receiver. The issue I have is when join Paltalk online Karaoke it sounds half as good as playing it local.
There are people in the online Karaoke room sound way clearer then me, when asked they said they have Creative sound blaster too. I have been messing with the sounds for the past 3 days to see it could be improved but no luck. Your suggestions are welcome.

Some more details would be nice - i had to search about what Paltalk online Karaoke even is. Still i don't know which OS (XP, Vista, 7 - x32/x64), which drivers (<a title="current latest beta" target="_self" href="http://support.creative.com/Downloads/searchdownloads.aspx?filename=SBXF_PCDRVBETA_US_2_ 18_0015A.exe">current latest beta[/url] or any Daniel_K- e.g. Pax- pack), which browser (that might be important on such a topic) etc. you have.

X-Fi Titanium Fatal1ty Champion Series stopped working

6X-Fi Titanium Fatalty Champion Series stopped working Hey guys!
After a totaly normal reboot, my X-Fi Titanium Fatalty Pro/Champion suddenly stopped working....
No sound and the led ont the side of the card also is black(same for the front panel) while the optical out still seems to be working.
Its still displayed as Creative sb xfi in the device manager but the main output device is shown as Internal AUX-socket in the sound options dialog (while the spdif-out seems to be ok)
<a rel="nofollow" target="_blank" href="http://i49.tinypic.com/332slj.png"]http://i49.tinypic.com/332slj.png[/url]
<a rel="nofollow" target="_blank" href="http://de.tinypic.com">[img"]http://i49.tinypic.com/332slj.png" width="639[/img] alt="Image and video hosting by TinyPic" height="399">[/url]
Reinstalled everything about 5 times.....doesnt work

Still no solution... but the spdif out/in realy seems to work....

Sound Blaster X-Fi Titanium Fatal1ty Champion Series and Win 7 64Bit

Now that Win 7 SP is out, i am planning on moving over to the Win 7 64Bit OS.
Whats the best way to setup Sound Blaster X-Fi Titanium Fatalty Champion Series card software setup.
Is there a DVD i could download or be sent for Win 7.
Whats the best way to proceed...
Thanks
red

OK I got it!!
I put in a Price Alert at the egg and got it for 09.00/with FREE shipping so I'm stoked!! it DOES have a yellow sticker on the box that says "works with Windows 7" so I guess this is all I need.
Are there ANY suggestions on how to go about installing this in Windows 7 64bit, I want the front panel to work and will use it for movies music and mostly gaming.
what about Windows 7 installing the card as a standard sound device at boot, is there a way to prevent this if not how is this fixed?
Should I use the newest beta drivers? or wait till I see if I have any problems with the sound not working?
what about the user made drivers I have seen around these forums, I know they are most likely not supported but how about functionality? would they be better?
thanks for any suggestions.

TS1559 my iphone 4s version 7.0.4 wifi turned out grey. i restored my iphone also but didnt work, what shall i do???

my iphone 4s version 7.0.4 wifi turned out grey. i restored my iphone also but didnt work, what shall i do???

ChrisJ4203, thanks very much for your input. I don't mean to turn this post into an endless debate, but frankly I am still having a hard time believing that the WiFi died as a result of a hardware failure.
My logic might be flawed, but here it is:
While the iPhone 4S got very hot when wirelessly downloading and installing iOS 7.0.4 over the WiFi network, the WiFi chip and antenna had to be functional to complete the wireless iOS update. Apple was very clear that iOS 7.0.4 is too large to download and install via cellular service. Accordingly it would appear that any hardware failure had to occur in the few minutes between the download/installation of iOS 7.0.4 and its first use. That window of opportunity is incredibly small in an otherwise flawless hardware performance. I am not a big believer in long shot coincidences, so a WiFi hardware malfunction seems highly improbable to me, but not impossible. A firmware/iOS conflict still seems more plausible to me.
I also don't read much into Apple's "out-of-warranty" replacement offer at $199. AT&T tells me that anyone walking in off the street (with or without a hardware or iOS malfunction) would receive the same offer.
I appreciate that some iPhone 4S users did not experience any WiFi issues when they updated to iOS 7.0.4, but such difference could easily be explained if Apple used more than one WiFi chip and/or firmware in the iPhone 4S series. Such an explanation would also account for iOS 7.0.4 (and 7.0.6) not recognizing the WiFi chip after the iOS update.
Still perplexed, but thanks again for your kind efforts to help.
Wonder if I can limp along long enough to spend my money on an Apple iPhone 6 ... but then again I don't want to be anyone's beta-tester.
I am tempted to switch to a Samsung Galaxy or some other smartphone as long as I will be buying new accessories, but frankly I don't want to waste my time learning a new OS or core apps.

X-fi fatal1ty titanium champion card loves confuse me

5X-fi fatalty titanium champion card loves confuse me READ THE WHOLE THING I KNOW ITS HUGE JUST GET OVER IT IM NOT FIXING IT
Here's the deal. I'm using Win 7 Home premium 64 bit. I've got an X-Fi Fatalty Titanium Champion card (2.7.0007 drivers) and a Fatalty gaming headset. No i'm not a fan I just bought them together. Now, there's a switch on the headphones wire that turns the microphone on or off. Before I go on, know that I've checked and made sure that the playback button for the mic in both windows sound panel and creative console launcher were off. In case anyone isn't familiar with the card, there is a mode switcher that optimizes the engine for different tasks. Whenever I switch modes with the mic plug in the jack, I hear a faint hissing noise. It sounds different on each mode, and it is the laudest on game mode. But when ever I turn the mic on from the switch on the headphones wire, I hear an explosion noise, and a shrieking sound from the headphones. This only happens after I've switched modes at least once. Now, I know what your thinking, "AIDAN YOU IDIOT ITS JUST FEEDBACK OLOLLOLOL", but the mic is detachable from the headset, and IT HAPPENS WHEN IT IS DETACHED. Now, I've tried screwing around with the settings, and there are a few things that stop it... until i change the mode again. But these solutions appear to randomly work, for example, at once unmuting and muting playback made it stop before, but occasionally it doesn't. Even when I can turn the headphones on without recieving hearing damage the mic doesn't record anything. The only way to make sure the "explosion glitch" truly disappear is to unplug my mic and switch the flexijack mode from mic to line in. Please, give me a solution so I can actually switch modes and use my mic without having my headphones scream at me!

Bump
Anybody have anything?

Unable to reinstall X-FI Fatality Platinum Champion series..

<Unable to reinstall X-FI Fatality Platinum Champion series.. ok seeing as i got no response at all in my other post here>>>> http://forums.creative.com/t5/Windows-7/X-Fi-Platinum-Fatality-Champion-Series-Win-7-x64-Error-I-000/td-p/547599?and now i have a new problem.. i started a new thread..
so since waiting for a response here i've noticed that along with my other problems that every now and then that a speaker here and then used to drop out.. then just a little while ago i noticed that i coudn't get anything other than the 2 front speakers on my Z-5500's to work.. so i decided to uninstall and reinstall everything related to the card..
well just now i uninstalled all things related to my creative card?through the uninstall programs feature?in the control panel.. then ran driver sweeper.. rebooted.. then driver cleaner.. rebooted.. then ccleaner.. rebooted.. then i repeated this process again in safe mode.. then i went to the device manager and removed the x-fi as it was still listed and the multimedi audio controller.. everything went ok.. or so i thought..
rebooted and began reinstalling the drivers listed as "COMPATIBLE" with Win7 x64.. but i noticed when installing the 2.8.003 driver that it took mere seconds for the sri'ver to install.. rebooted and still no sound.. installed the rest of the drivers and apps listed for my setup and still no sound.. also i noticed over half of the icons in the programs menu never even installed..
long story short i repeated all the steps mentioned above and tried the drivers from my Vista install disc and got an error saying that the drivers were not compatible with my operating system and was only given the option to exit..
any and all help would be greatly appreciated THX!!

Look at the beta thread sticked above but good luck waiting for a new driver. That beta driver has been there since January and although better than the normal driver it is still crap.
All the boot type issues are with the SSD but if you getting in game crashes etc... under windows 8 that is simply that the driver stinks.

When I download pictures from my camera, they turn out a nice big size in iPhoto; other pictures that have been e-mailed to me or imported from older libraries/other computers show up small. Why is this, and how can I make them all the larger size?

When I download pictures from my digital camera into iPhoto, they turn out a nice large size (usually almost the full screen), but when somebody e-mails me pictures and I import them into iPhoto, or when I transfer old photos from an old library into my new iPhoto library, they turn out very small--not exactly thumbnail-size, but too small to use for calendars or photo books. I don't know much about computers, so I don't know how this happened. Also, I can't find any discernible pattern to why this happens with some pictures and not others--ie: what I described above is usually true, but I have had e-mailed photos or old photos turn out the way I want them, which is in the larger size in iPhoto. Why is this happening, and how can I make all the pictures the larger size?

Some mail programs, including Apple Mail, can reduce the size of images that are attached to a message. It's happening at the sender's end, and all you can do is ask the sender for a larger image.

After I upgrade iphone4 to iOS 4.3.5 and turns out cannot sync anymore

After I upgrade iphone4 to iOS 4.3.5 and turns out cannot sync anymore
Please help

Well, I was able to get it to sync by opening iTunes first, and THEN connecting the iPhone. And it does sync but still will not sync with iPhoto. I also unchecked and rechecked the option to "Open iTunes automatically when this iPhone is connected" and now iTunes opens and syncs automatically. But tried the same thing with iPhoto to no avail.
Any ideas for iPhoto syncing?
Dukes, since you are running on Windows you might open a new discussion, or try this solution someone else posted that pertains to Windows: http://support.apple.com/kb/TS1538

I opened a file on my desktop that I don't remember putting there. It turned out to be a keychain certificate from a client of ours. Does this mean that they were spying on me? What is the deal with that? Any ideas?

I opened a file on my desktop that I don't remember putting there. We use many photos and I thought it was a photo file I was looking for. It turned out to be a keychain certificate from a client of ours. Does this mean that they were spying on me? What is the deal with that? Any ideas?

Interesting tid bit. I created an AAC of the original file, deleted the original MP3 from my library and also deleted the Clean matched track from the icloud.
Result is that it matched with the explicit version of Mrs. Officer this time.
What I am curious about is which songs this is happening for. I've went thru a few batched of about 500 songs at a time and redownloaded in 256k for many tracks. Sadly we don't have people to bring this to our attention and I have so much music that it's impossible to go thru every song to make sure I am getting the right version.

X-Fi Titanium Champion Series. Folloup, Turns OUT STATIC NOT CREATIVES FA

Similar Messages

Maybe you are looking for