"X. is calling" as ringtone when listening to my music?

Is it possible to personalize the ring tones? I want to record my voice saying "Annette", "Steve", "Mom", etc.... and add these audio files to iTunes, so that when one of these people call me while listening to my music and driving I don't have to reach to my pocket to see who's calling. All I'll hear is a voice announcing who's calling?
can i do that with my phone?

See:
http://discussions.apple.com/message.jspa?messageID=4854405#4854405

Similar Messages

  • "X. is calling" as ringtone when listening to your music?

    Is it possible to personalize the ring tones? I want to record my voice saying "Annette", "Steve", "Mom", etc.... and add these audio files to iTunes, so that when one of these people call me while listening to my music and driving I don't have to reach to my pocket to see who's calling. All I'll hear is a voice announcing who's calling?
    can i do that with my phone?

    See:
    http://discussions.apple.com/message.jspa?messageID=4854405#4854405

  • When listening to my music, the woman announces the name of the song and all of my playlists

    When listening to my music,(on my Ipod Nano 6th generation) the woman announces the name of the song and all of my playlists

    See this article for instructions on how to turn it off via iTunes.
    http://support.apple.com/kb/HT4317
    B-rock

  • IPhone 6, problems with volume, automatically goes to the max when listening to the music

    iPhone 6 iOS 8.1, sometimes when I'm trying to increase volume by 1 bar, it goes to the max and there is no way to decrease it without reboot. Had same problem before updating to iOS 8.1... I've never had that problem with my 5S, which is also on iOS 8.1. I'm using Beats Mixr headphones with remote. I've tried to restore the phone, didn't helped.
    Yesterday I was listening to the music on iPhone 6 for about 4 hours and this happened 5 times, today I listened music from iPhone 5S for almost 5 hours and it didn't happended even once... I was using the same headphones... Any ideas?
    THanks in advance

    My phone is not on mute, the volume is up to the max, there are no blue tooth connections, the phone will not ring only vibrate with the ringer on.  I cannot hear any music through the phone either.

  • My new iPad speaker crackles when listening to some music or games. Is my speaker dying out on me? Can this be fixed?

    When I listen to loud or deep bass music, my new iPad speaker crackles. Is this a common problem with iPads? Can this be fixed? How much is it? My warranty is expired.

    LambChops1,
    I’m using Mavericks, and it’s still possible to select text to drag and for cutting and pasting. Left-clicking and right-clicking is still possible, too.
    Try opening the Trackpad pane of System Preferences, and select the Point & Click tab. To right-click, ensure that your “Secondary click” checkbox has been checked; the small print under “Secondary click” is a dropdown menu which allows you to select the form of right-clicking that you prefer. (For instance, mine is set to “Click in bottom right corner”.) For left-clicking, is your “Tap to click” checkbox checked, or unchecked? (Mine is unchecked, since I prefer pushing for left-clicking over tapping to do so.)

  • Hey how are you guys listen i have an iphone 4s the one i use with the H20 CARRIEr and i trying to enable the option call forwarding and when i type tho number i go back and i notice to the call forwarding it turning off as soon i back to the main menu ?

    hey how are you guys listen i have an iphone 4s the one i use with the H20 CARRIEr and i trying to enable the option call forwarding and when i type tho number i go back and i notice to the call forwarding it turning off as soon i back to the main menu ?

    There are a lot of posts in the forums today with people having problems with iMessage.   There was also a published outage yesterday, so it's possible there are still some issues that may be impacting you both.
    I would just wait it out - I'm sure it will be sorted out soon.

  • How do you get a certain ringtone when someone is calling you?

    I wanted to know how to get a certain ringtone when someone calls me, not the Verizon music that is on there now

    Please explain.
    You want the person who calls you to hear the ringtone?  Ask Verizon if they offer this.
    You want to hear the ringtone?  You can create your own ringtones.  Google will find many way to do this. You can also buy them from the ringtones section of the itunes store on your iphone.
    Audiko: Free Ringtones for iPhone & Mobile. Free Ringtone Maker
    How to make ringtones for iPhone | Digital Trends
    How to make iPhone ringtone [FULL Guide] - Freemake
    How To Make A Custom iPhone Ringtone In Itunes 11 - YouTube
    http://www.youtube.com/watch?v=IyqCC3IAv7M 
    How to Make Custom iPhone Ringtones for Free | eHow

  • Microphone of my iphone is not working when i call anyone nobody can listen but me, its working with headphone but its also working with videocam recording, please help me to solve this probelm.

    microphone of my iphone is not working when i call anyone nobody can listen me its working with headphone. but it is working with videocam recording, please help me to solve this probelm.

    Try this:
    1. Reset the iPhone by pressing and holding the sleep/wake and home buttons and releasing them, when the Apple logo appears on the display. Now test again.
    2. If the issue persists: Restore the iPhone without any of your own content, using this description from Apple: http://support.apple.com/kb/HT4137
    3. If the issue persists, Your iPhone need repair.

  • When iPhone is Locked I do not get a ringtone when getting an incoming call

    I am a Newbie here so please forgive me if this is a stupid question. I have tried to search, but cannot find a solution, or at least 1 I can understand. Alright got my first iPhone Friday. I have my phone set to Autolock at 5 min. With this configuration when the phone has entered it's locked state I do not hear a ringtone when I am getting an incoming call. My phone does vibrate, but I want to be able to hear a ringtone. The button on the side is not in SILENT MODE... So I am not sure how to be able to hear a ringtone... if it's even possible. You help is greatly appreciated.

    I've seen dumber questions... No worries and no flames from me.
    Enjoy your iPhone!

  • Does the sound of your caller get reduced when you speak at the same time?

    Hi everyone,
    I'm noticing some strange behaviour of my iPhone 3G's audio on the O2 network here in the UK. Both O2 & the iPhone are new to me so I don't know which is the cause, but was wondering if anyone else has experienced this 'problem'? What happens is this:
    When I'm on a call with my ear to the iPhone's earpiece (or using headphones) & I speak whilst the caller is speaking (or let's say I'm chatting to my wife in the same room as me whilst I'm listening to 'hold music'), I've noticed that *the volume & call-quality of the incoming line is often reduced*.
    Initally this might not seem a problem, BUT, there have definitely been a view times when I've been in a noisy environment (such as street traffic, or my kids shouting & playing in the background) where I've missed things that the caller told me. In both these situations, I've noticed that the caller's voice has got quieter, sounded 'grainy' or even sometimes gone totally quiet until the sound from me (or my environment) has stopped. The 'problem' seems to right itself a minute or so of the call, but that's little consolation to the first 60 seconds of the call!
    It's most noticeable on headphones by the way; As a test, I plugged in regular headphones to my iPhone (i.e. not the iPhone IEMs with the mic), called a landline phone-line with a pre-recorded message, then spoke into the iPhone's built-in microphone. Every time I did this, the incoming audio signal was 'turned down' &/or sounded gritty, then returns to normal when I (or my background noise) went quiet.
    I don't think this is a fault with my phone. but more either an iPhone 3G hardware 'characteristic', v2 software bug, or network issue. (O2 said they've never heard of this before of course...)
    If anyone else has the time to try this out please, I'd appreciate it
    Thanks,
    Jason

    Hi Quickdraw,
    Thanks for your reply.
    I don't know this for sure, but I think it has EVERYTHING to do with bandwidth.
    Yes, that makes a lot of sense... I was making calls on 2G/Edge at the time of my 'tests' rather than 3G, partly due to battery-saving but also that 2G still has much better coverage over here (just as you guys in the States seem to be experiencing).
    I've done some more tryouts today, & noticed that if the 2G signal is really strong, OR if I switch to 3G & have a reasonable-to-good reception, the 'incoming-signal-dropping-out-when-I-talk' doesn't happen much at all...
    So, the bandwidth thing does make sense, but it's interesting/annoying that it manifests itself as "one good-quality voice OR the other", rather than "full-duplex-but-not-so-great-for-both-voices" sound...
    If anyone in the UK can feed back their experience with O2, I'd appreciate it please. (I never had this issue in the 10 years I was with Orange..)
    Cheers,
    Jason

  • I have the same problem in my iphone. i can receive call and talk and listen too otherwise no sound at all like ringer tone , on-off click soung , video-music soung , game sound.

    i have the same problem in my iphone. i can receive call and talk and listen too otherwise no sound at all like ringer tone , on-off click soung , video-music song , game sound.
    i have tried to clean the audio jack too but result is the same. Can any body help me please.

    No external sound or not sound at all - external or when using the earbuds?
    Standard troubleshooting steps in order are; power the iPhone off and on, Reset by pressing and holding the Home key and Sleep/Wake or On/Off key simultaneously until you see the Apple logo and then release - ignoring the slide to turn off prompt when doing so, Restore.
    i had it once before, restored the iPhone and it was solved, but i don't want to restore my iPhone every day.
    Does this happen every day? If not, when was the last time this happened?
    If you have sound when using the earbuds, another thing to try is insert the earbuds and start playing a song - making sure the sound can be heard with the earbuds. Without pausing the song, remove the earbuds.
    If no sound is available with the speaker and a the troubleshooting steps do not resolve it or one of the steps does resolve it but the same occurs again, time to give AppleCare a call (800) 694-7466 or make an appointment at an Apple Store if there is one nearby.

  • On my iPhone 4 the sound is all scratchy when listening through earbuds or dock.  Its any sound, music, utube videos.  If I play it through the iPhone speaker or from bluetooth it sounds fine.  It just started about 3 weeks ago.  Any suggestions?

    In the last three weeks my iPhone 4 (OS 5.1.1) the sound became all scratchy when listening through the ear buds of if I dock it.  The sound is fine listening to it from the iPhone speakers or in my car through bluetooth.  Please remember its all sound.  Whether its music, utube or a phone call.  Any suggestions?

    Mini Man, I'm glad to read you found a solution to your issue, but I don't know if your solution is going to be mine as well.
    For starters, I do not have the new Apple TV - at least, not yet. I have ordered one, but it will not be delivered until some time next week (sneering glance at Steve & Co. for abandoning that platform rather than making it AirPlay compatible).
    But that is not really my issue: my issue is that my two Airport Express units do NOT show up in the iPhone, though the DO show up on my iPad. This tells me they have been properly configured (both units have names, and are connected to the house network), so there must still be something missing from the equation.
    And, judging from the response of a few others who have chimed in here, I think it's save to say that the experience is not altogether uncommon.
    I'm surprised nobody has come back with a more direct solution to the common issue. I may have to call AppleCare someday this week...
    --PS

  • I upgraded both my iphone and mac os and I noticed that when listening to internet radio I only get 1 channel whereas before I was able to receive 2 channels. Any suggestions?

    upgraded both my iphone and mac os and I noticed that when listening to internet radio I only get 1 channel whereas before I was able to receive 2 channels. Any suggestions?

    I received my week 16 MBP yesterday morning. It has been perfect thus far. Quite the improvment over my old iBook. I do hear some noises rarely but not enough to make me think there is a problem, I believe they are just the standard purrs and ticks of a high-powered computer. It doesn't run hot. I'd say cool to rather warm if used heavily. I hope I have a problem free experiance. I would hate for this product to tarnish Apple's reputation, that would be unacceptable considering this product is amazing. I will say this; I called Applecare, more out of curiousity than anything else and told them that I had just purchased an MBP and, while mine was fine, I had heard allot of disturbing reports about noise and heat. I asked point blank if Apple was aware of any issues and if they where working to resolve it. The answer I got was surprisingly forward. I was informed that they were "VERY" aware and working to correct the issues. He then told me I was lucky to recieve one of the quiet MBPs. I hope they work it out soon.
    MacBook Pro   Mac OS X (10.4.6)  

  • SwingWorker done() is called BEFORE process() when publish() used

    I'm using SwingWorker to build a list of files by recursively searching a directory. As a file is found I call publish(file). In my process() method I add the file(s) to a list model, which updates a JList. I also have a PropertyChangeListener attached to the SwingWorker so I know when its done. The listener calls listModel.getSize() when done, so I can determine wheter to enable a 'Clear List' button. When only a few files are found, SwingWorker is done() before process() has added the files to the model, so the size is 0 and the button is not enabled.
    Mu question is how can I get SwingWorker to call process() before calling done()?
    Thanks

    Mu question is how can I get SwingWorker to call
    process() before calling done()?I have run into the same problem. It's ugly. The least Java could do is offer a flush() method. At best, they'd fix this problem and flush any publish()ed objects before calling done(). I've worked around it for now with a hack. I simply publish a null to signal completion in doInBackground(). I don't even override done() any more. Of course, I'm assuming publish() order is maintained (evidence so far supports this assumption).
    The only other option I'm aware of is invokeLater().
    Andrew

  • Screen goes dark when listening to voice mail

    My Droid Charge Screen always goes dark when listening to voice mail. if i want to delete or end the call, or go to speaker phone I can't do so by using the touch screen. It also goes black when I am on a call and if I want to activate or deactivate speaker phone I can't. sometimes I lose calls because of this. any way to keep the screen illuminated while on calls or voice mails?

        dishbasher,
    Sorry to hear about your Droid Charge device not functioning properly. It drives me crazy when technology does not work the way it is designed to, so lets get this fixed! Have you tried running your device is safe mode http://bit.ly/n2EIBZ  or a master reset http://bit.ly/w21WpW?
    Thank you,
    Georgep_VZW
    Follow us on Twitter VZWSupport

Maybe you are looking for

  • How do I install the Mac App Store on my OS X?

    The download is not under Software Update. Do I have the right version?

  • Preview & File Size for jpegs problem.Bloating bug?

    When adding cover art to iTunes, I am checking the file sizes to be certain I have the smallest size possible to add to my new iPod 16G nano. When connected to the iTunes store and "Get Album Artwork" is selected, I have no way of knowing the size of

  • ALV Tree event registration doesn't work

    Hello Experts, the following is the registration-form which shall register a item-double-click event to my alv-tree-object. when doing the double-click it doesn't open my own methods in the event-handler class but the standard ones and nothing happen

  • How to know which combobox is for series?

    Hi All, Is there any way to know, on a particular document, which combobox is 'Series' combobox? for marketing documents , its same(item 88). but, for other documents such as that of inventory transactions and incoming/outgoing payments or journal en

  • Application Support are missing and I have to reinstall

    I have Mac G4, running PS CS2 v9.0.2. I've just installed OS 10.4.11, now when I dbl. clk. a ps file it won't open and I get a message saying, "One or more files in Adobe App. Support folder are missing Pls. reinstall PS. I found the topic in the for