X200 Intel Active Management default password??

Hello,
I brought a Lenovo x200s and directly downgraded it to windows XP.
Then I installed a personal firewall and recognized huge harddrive activity. So i checked the log and recognized the initiator: lms.exe. It belongs to Intel(R) Active Management Technology Local Manageability Service.
I don't need the whole thing and checked the settings in control panel, but noting can be configured. This has to be done during boot. After pressing CTRL+P the Intel Management Engine Bios Extension asks for a Intel ME Passwort
I have never entered any. What's the default one?
Thanks...
Greetings from good old Germany
Solved!
Go to Solution.

Hello Canzler, welcome to Lenovo forums!
Here at thinkwiki.org you´ll find a guide, how to setup Intel Active ManagementTechnology AMT.
Message Edited by Agotthelf on 03-04-2009 10:11 AM
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
 English Community       Deutsche Community       Comunidad en Español

Similar Messages

  • Intel Active Management Technology Status

    Hello
    4 months ago I bought Lenovo X61 ThinkPad notebook has Intel Centrino vPro, just few days ago, each time I start the notebook a pop-up note come up into my screen that the status of Intel Active Management Technology (AMT) is disable, and I should contact authorized system administrator; on the same pop-up a note stating "click here"; I done that and it took me to Intel website, when I read the page, it made me to understand that AMT has something to do with my notebook security.
    I shall be grateful if could help me to solve this problem/technical issue to enable the AMT.
    Thank you
    Talaat Agha

    Hi Rado
    > Can you specify what do you mean by recover the system to install after formatting the disk?
    I think the Macdreamy means that you have to use the Toshiba original Recovery CD to reinstall the system on your notebook.
    The point is that this error could appear if some necessary and essential system files are damage/removed/changed.
    > the first time I install my Toshiba XP no key was required but I am not sure for the second formatting and I only have Vista key on the bottom of the laptop. Do you know how the situation with the XP key in such case is?
    As far as I know the Toshiba image (on the Toshiba Recovery CD) is already activated and you dont need any keys for OS activating.
    The key at the bottom of the unit belongs to the installed image and it cannot be used with second Windows XP operating system!!!
    If you want to use and install the XP on this machine then you would need a original MS Windows XP CD with the right key!
    However, back to the Recovery procedure;
    Just put the Recovery CD into the CD/DVD drive -> boot from the recovery CD -> follow the instruction and after a short time the new OS with all Toshiba drivers and tools should be installed correctly.
    But note; As Macdreamy already said the data backup could be needed because the Recovery CD formats the whole HDD.
    Good luck

  • Intel active management technology

    will not install

    Hi,
    Which os version you want to install intel active management technology?
    According to the intel official article, it will execute on Windows 7 and Windows Server 2008 R2.
    https://software.intel.com/en-us/articles/download-the-latest-intel-amt-software-development-kit-sdk
    Please connect the intel technical support as mvp mentioned.
    Regards.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • W540 no Intel Active Management Technology?

    As per subject, I don't see any options enable intel AMT in the bios, and when i log into intel Management Engine I don't have intel AMT settings either, instead I have Intel Smart Business Technology in place of AMT. I went in and i only have 2 options, nothing much to configure here. Is this intended for W540? What does intel SBT does?
    Solved!
    Go to Solution.

    Hi, Edmund_Tan,
    Quoting from Intel's site: "Intel Active Management Technology (AMT) is hardware-based technology for remotely managing and securing PCs out-of-band. Currently, Intel AMT is available in desktops, servers, ultrabooks, tablets, and laptops with Intel Core vPro processor family, including Intel Core i3, i5, i7, and Intel Xeon processor E3-1200 product family."
    I did some research, and found out that vPro is not supported by the following Intel processors avaiable in W540 models:
    i5-4200M, i7-4700MQ.
    If you have one of these, you probably won't find any options for IAMT in the BIOS.
    I myself bought the model with i7-4800MQ and can find options for IAMT I the BIOS under: Config  > Intel (R) AMT. 
    Hope this helps

  • Re: Home Hub Manager Default Password

    Dear Sir/Madam
    I am a 70 year young lady but not a wiz kid!
    I just want to know the default password of the hub so that I can change the router to wireless.
    Thank you for your help
    Looking forward to hearing from you at your earliest convenience
    Yours faithfully
    H

    HuguetteAvila wrote:
    Dear Sir/Madam
    I am a 70 year young lady but not a wiz kid!
    I just want to know the default password of the hub so that I can change the router to wireless.
    Thank you for your help
    Looking forward to hearing from you at your earliest convenience
    Yours faithfully
    H
    Hi and welcome to the forum
    Your Home Hub "should" already have wireless enabled. What version of Hub do you have?
    (If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
    If I have solved your Issue please click the "Mark as accepted solution" button.

  • Re: Tecra M11-11J - I'm searching Active Management Technology driver

    Looking for a driver for the Intel active management technology (AMT), on my Tecra M11-11J
    Although there is a category for it on the downloads page, even when searching for all operating systems no results are found!
    Thanks in advance,
    Nathan

    By the way, Xardas is right you can find it on the Toshiba driver page:
    For
    [Windows 64 bit|http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=5&selSeries=148&selProduct=1163&selSh ortMod=null&language=13&selOS=all&selType=324&year upload=&monthupload=&dayupload=&useDate=null&mode= allMachines&search=&action=search&macId=&country=a ll&selectedLanguage=13&type=324&page=1&ID=74160&OS ID=30&driverLanguage=42]
    [Windows 32 bit|http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=5&selSeries=148&selProduct=1163&selSh ortMod=null&language=13&selOS=all&selType=324&year upload=&monthupload=&dayupload=&useDate=null&mode= allMachines&search=&action=search&macId=&country=a ll&selectedLanguage=13&type=324&page=1&ID=74118&OS ID=29&driverLanguage=42]
    [Windows Xp|http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=5&selSeries=148&selProduct=1163&selSh ortMod=null&language=13&selOS=all&selType=324&year upload=&monthupload=&dayupload=&useDate=null&mode= allMachines&search=&action=search&macId=&country=a ll&selectedLanguage=13&type=324&page=1&ID=73817&OS ID=10&driverLanguage=42]

  • INTEL (R) ACTIVE MANAGEMENT (SOL) ISSUE

    please HELP
    I have a d230MT machine which is supposed to have INTEL (R) ACTIVE MANAGEMENT (AMT) in the BIOS. However I try, I can not bring up the INTEL (R) menu.
    Could it be that this program is not in the BIOS?
    or, is it me who is not doing something right.
    What is the best way forward

      Google is your friend if you want to look for answers on your own.
     To use AMT:
    Hardware requirements for desktop PCs with Intel vPro
    Desktop PCs with vPro (called “Intel Core 2 with vPro technology”) require:
        * For AMT release 5.0:[30]
              o Intel Core2 Duo processor E8600, 8500, and E8400 ; 45 nm Intel Core2 Quad processor Q9650, Q9550, and Q9400.
              o Intel Q45 (Eaglelake-Q) Express Chipset with ICH10DO.
        * For AMT release 3.0, 3.1, and 3.2:[2][5][6]
              o Intel Core2 Duo processor E6550, E6750, and E6850; 45 nm Intel Core2 Duo processor E8500, E8400, E8300 and E8200; 45 nm Intel Core2 Quad processor Q9550, Q9450 and Q9300.
              o Intel Q35 (Bearlake-Q) Express Chipset with ICH9DO.
    Note that AMT release 2.5 for wired/wireless laptops and AMT release 3.0 for desktop PCs are concurrent releases.
        * For AMT release 2.0, 2.1 and 2.2:[5][7][29]
              o Intel Core 2 Duo processor E6300, E6400, E6600, and E6700.
              o Intel Q965 (Averill) Express Chipset with ICH8DO.

  • Enabling Intel AMT (Active Management Technology)

    I have a P67A-G45 and would like to be able to remotely administer my desktop PC with Intel AMT.
    I have BIOS 1.A and have installed the latest Intel Management Engine Driver for P67/H67 from the MSI website. In Device Manager, I have Intel(R) Management Engine Interface in System Devices.
    I've downloaded Intel SCS, but when I run the wizard, I get the message "This system does not support Intel AMT, and therefore cannot be configured."
    There doesn't seem to be any option for Intel AMT in the BIOS.
    Is it possible to enable Intel AMT on this board?
    Thanks.

      Google is your friend if you want to look for answers on your own.
     To use AMT:
    Hardware requirements for desktop PCs with Intel vPro
    Desktop PCs with vPro (called “Intel Core 2 with vPro technology”) require:
        * For AMT release 5.0:[30]
              o Intel Core2 Duo processor E8600, 8500, and E8400 ; 45 nm Intel Core2 Quad processor Q9650, Q9550, and Q9400.
              o Intel Q45 (Eaglelake-Q) Express Chipset with ICH10DO.
        * For AMT release 3.0, 3.1, and 3.2:[2][5][6]
              o Intel Core2 Duo processor E6550, E6750, and E6850; 45 nm Intel Core2 Duo processor E8500, E8400, E8300 and E8200; 45 nm Intel Core2 Quad processor Q9550, Q9450 and Q9300.
              o Intel Q35 (Bearlake-Q) Express Chipset with ICH9DO.
    Note that AMT release 2.5 for wired/wireless laptops and AMT release 3.0 for desktop PCs are concurrent releases.
        * For AMT release 2.0, 2.1 and 2.2:[5][7][29]
              o Intel Core 2 Duo processor E6300, E6400, E6600, and E6700.
              o Intel Q965 (Averill) Express Chipset with ICH8DO.

  • Don't know the DEFAULT password of Developer Suite database 10g

    After i install Oracle10gR2 i have one database sit on my hard drive already.
    But then i install the Development suite 10g they install one more database for me...
    The second i don't have option to set the password or account during the installation...
    So i just cannot get in the DevSuiteHome1 database... i don't have password of the sys or system account....cause i don't even have chance to set it.
    Does anyone here know what's the default password of sys or system account?
    (P.S. the SYS/CHANGE_ON_INSTALL or SYSTEM/MANAGER all doesn't work at all)
    If anyone can tell how to use the 10g forms builder connect to the OraDb10g_home1 database rather than the DevSuiteHome1's one also great!
    Please help cause i need it to do my uni assignment...

    Fishingguy,
    Forms doesn't install it's own database during install of 10g iDS. So that's your problem. You can't connect to a database that isn't there. What you can do is connect to the other database you already have configured. You'll need to update the tnsnames.ora file in your DevSuiteHome1 Oracle Home. It is located in the network/admin directory under that Oracle home.
    If you're not sure how to set this up, you'll need to either manaully enter the info from your database tnsnames.ora file. A lot of times, you can just copy the contents of the file over from the database side to the DevSuiteHome1 side. Back up the other one though just in case your situation is different.
    If you want to use a GUI, you can use the Net Configuration Assistant tool for the DevSuiteHome1 Oracle Home. It works well if you know the specifics of your setup like hostname, database listener port, etc. Forms will make a SQL*Net connection to your database.
    Ping us if you need more help configuring this.
    Cordially,
    Steve

  • Wireless Networks not available under Manage Default Printers.

    I have a client who has 4 offices he travels between. He needs the default printer to change based on the name of the wireless network he connects to. This feature worked for a while, but after some unknown point stopped accepting new networks into the list
    under "manage default printer". We changed the SSID of two locations a month ago, and I can not get them to show up in the list under "manage default printer". I went through and removed every listing under the "manage default printer"
    list, hoping to start fresh, but after a week, in the dropdown menu, only the old networks are there. 
    Bottom line is I need to find out why these new SSID are not showing as an option to select inside of "manage default printers". Or find a way to manually add them. I (believe) have found where they appear to be in the registry, but the values
    for network name seem to be encrypted. Is there a file I can edit somewhere to manually add in these entries?
    The target networks are remembered and can be managed by windows, and connect automatically. 
    This is a Windows 7 Pro laptop. 
    Thanks!
    -Ozzy

    Hi,
    Based on my research,it may be caused that you have not deleted network locations completely.
    Please follow the steps to check the result.
    1.open the Network and Sharing Center console in Control Panel.
    2.Click on the "Icon" under "View your active networks". This will open the "Set Network Properties" dialogue. Here you can rename a network connection or change the icon for that network connection.
    3.Click on "Merge or Delete Network Locations" to see a list of stored network connections. You can delete the old SSID.
    Regards,
    Kelvin_Hsu
    TechNet Community Support

  • Jet direct 610n default password

    I had to replace my jet direct card 610n on my 4100, and cannot get in the gui interface.  What's the default password to manage the gui interface?  I've tried admin-admin, administrator-admin, admin-password, administrator-password, admin-manage! etc... cannot get in.

    This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
    You can find the Commercial Jetdirect board here:
    http://h30499.www3.hp.com/t5/Print-Servers-Network-Storage/bd-p/bsc-254
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Manual setup of e2500 default password and network do not match documentation ?

    Advance user/network engineer/firewall engineer just bought an e2500 (have been using wrt54G's for years)...
    first issue... documentation is incorrect as the default network/admin webserver IP address is 192.168.0.1  not 192.168.1.1 as all the documentation i could find indicates.
    I really don't want to install the Cisco Connect "bloat-ware" on my PC...the documentation also says the default login is no user ID and password="admin"...this not correct.  I have checked everything i would normally check...caps-lock...typed password into notepad... cut/past into browser etc....no luck on manually connecting with browser...after failed logins I get a 401 error
    Any ideas before I take this thing back and switch to a NetGear ?
    Thanks in advance.

    Hello... Like you I also just switched to an E2500 from a very old WRT54G (v5). I am not a network engineer, however, I'm just an average user.
    I did not have any documentation in the box. I had the setup CD that was marked "Run This CD First". I followed the brief instructions on the CD cover and the installation process came to a complete stop during the "Checking for Updates" phase at the beginning of the process. I have no idea what the Cisco Connect software does or if I even need it. I even downloaded the updated version from this website and had the same result.
    I had an old shortcut saved on my desktop that allowed me to manage the old WRT54G router that led to http://192.168.1.1/ . Out of curiousity I tried the link and luckily ended up at a webpage that looked very much like the router management page that I was used to with my old router -- only better. I have been using it with no problems. I'm able to control the password and number of allowed users of the guest settings (I have seen other posts saying they couldn't do so). I don't know if I am missing anything by skipping the Cisco Connect software, but the router is working great for me!
    Oh -- and the default password for me was the very same as the default password on the WRT45G router: Leave the name area blank and use "admin" as the password.
    Hope that helps, and if anyone can tell me if I'm missing anything important by not using the Cisco Connect software, please let me know!

  • Managed Default Folders in Exchange 2007 - Urgent Help

    Hello All
    My requirement is to delete the emails from the inbox older than 5 days for 5 to 10 selected  mailboxes.  so i have created an new Managed Content Settings under the
    inbox from the Organization Managed Default Folders named "Inbox Deletion 5 Days"
    Created a new managed Folder Name mailbox Policy and added the Inbox from the Managed Default Folder 
    Then from server configuration -->Mailbox Server --MRM -->schedule the managed folder assistant via  Custom schedule 
    Added policy in the 10 mailbox properties
    Also, i have been forced to update the policy by start-managedfolderassistant - idenity Server name
    But the old emails are still there in policy applied mailboxes before 5 days, am able to see emails which was received before 10 days and all. 
    i restarted the exchange mailbox assistant services and but luck.
    Could you please someone help on urgent basis

    Have you configured the server(s) to log the activity for the managed folders?
    http://technet.microsoft.com/en-us/library/bb397218(v=EXCHG.80).aspx
    Also, the first time you run the managed folder assistant if doesn't do anything more than "mark" messages. It's only on subsequent running of the MFA that "stuff" actually happens. And it's important to remember that the criterion
    used by the MFA is the "modified date", so add that column to the Outlook view of the Inbox on those clients that are affected by the policy. There may be something "touching" the messages that's causing the modified date to change (think
    "brick-level backup, for one thing).
    The log file will at least show you whether the policy's working and what the MFA thinks of the mailbox folders under the policy.
    One other thing -- it's probably not a good idea to use the default "Inbox" folder. Create a new default managed folder named, say, "Inbox Delete after 5 days" and use that in your mailbox policy. That will afford you the flexibility
    to have more than one retention policy for the same folder.
    --- Rich Matheisen MCSE&I, Exchange MVP

  • D-Link DSL-2750B default password

    I have a D-Link DSL-2750B gateway from Verizon. I want to manage the router, but it requires a password to login. According to the menu, there is a label on bottom of gateway shows the password. But the label is missing. The gateway id is PX2M1BC065732. Can I get the default password from Verizon?

    These Forums are a place where users help other users. If you need an answer from Verizon directly please Contact Us.

  • Default passwords after installation BPA Repository

    I Installed the BPA Repository on my Windows server succesfully using an existing database.
    Now I try to connect to the server using de BPA admintool. I connect to the server 'localhost' and password CFGADMIN. But the connection is refused because the password in not correct.
    I am sure the repository is running because I started it manually (and the window doesn't show any errors and when I shutdown the repository I getting a server error when using the admintool instead of a password error).
    What are the default passwords for configadmin and siteadmin?
    What is the difference between siteadmin and configadmin?
    Is localhost the correct one (I am running the BPA admintool on the server where the Repository is running).

    Gertjan,
    What are the default passwords for configadmin and siteadmin?For siteadmin the default password is: SITEADMIN
    for configadmin the default password is: CFGADMIN
    What is the difference between siteadmin and configadmin?Site administration tool lets users manage multiple Business Process Repositories from a single tool.
    The configuration admin is local to a server and is for controlling method filters, evaluations filters and for controlling user access.
    Is localhost the correct one (I am running the BPA admintool on the server where the Repository is running).Yes, you can use either the local host, or the name or the IP address.
    Best Regards,
    Sidda

Maybe you are looking for