X2100 m2 - elom - wrong certificate uploaded, web ui no longer available

Hi,
I've uploaded wrong certificate to X2100-M2's ELOM (I've uploaded custom built certificate + private key in one PEM file -- w/o doing CSR, signing it by CA's and uploading that), it was stored without any complaints, but now the ELOM won't respond on HTTP/HTTPS.
I've tried flashing new firmware via ssh, but that doesn't help either. (not to mention it results in cmos checksum error, which is not recoverable without physical access now)
Is there any way I can restore the original certificate and/or doing the proper csr+upload process from ssh interface? (or via SNMP, which should be also available)
If not, how can I restore ELOM to factory default without physical access to the server (and possibly even w/o rebooting the OS)?
And if that's not possible, how can I restore ELOM to factory default in any way possible?
Thanks,
W.

Wonder if your private key had a password. If so, then the mini web server won't start as it would be prompted for a password.
You'll probably have to flash the firmware. Not sure if you can do so via the command line elom or from within the OS. I've been looking as to how to factory reset the elom on a x2220 m2 and have not found anything other than booting from the tools CD and flashing it from there.
The CSR option simply generates a self signed cert.
The Certificate option first prompts you to upload a signed certificate, and then it prompts you to upload the private key, which should have no embedded password.

Similar Messages

Touch Smart Web use no longer available?

When did the Touch Smart Web apps stop being supported?
It ays the internet isn't connected - but it is.

Hi there,
PLease check out this post for more information on the retirement of Touch Smart apps on certain printer models http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/HP-Apps-Service-Reti...
Best.
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee.

Vendor Quality Certificate - upload to R/3

Dear Guys,
Here is my Quick Question
The scenario is like this, the client Receive the Quality certificate from the vendor , for the purchased materials as Hard copy
The client wants to scan the Vendor Quality certificate and upload to sap
shall i develop new transaction code to upload those certificate to optical archive
or there available any sap standard transaction if yes please let me know is there any config to be done
Thanks
Raj

As per my Knowledge there is not any standard transaction to upload certificate ,so you must crate new transaction for this

Failed Calling A X.509 Certificate Secured Web Service From OSB

Hi,
I have wsdl resource, business service and proxy service setup in OSB 11.1.1.6 on Linux. The business service will consume a X.509 certificate secured web service running on a remote server.
Below is my approach:
The consumer of the proxy service of OSB signs its saop request header.
My OSB proxy service authenticates the signature and forward the request to business service.
The business service signs the outbound soap request header. (To do this I configured the keystore in Security Provider Configuration of my SOA_domain in Enterprise Manager. Also I applied Web Service Policy of Service Client type to the business service.)
This is not working yet. Not sure if my approach is correct or not?
Thank you,
Eric

I validated the keystore, all the certificates used and the value for keystore.sig.csf.key / value for keystore.recipient.alias. They are all as expected. Restarted the server. Still failed for OSB to invoke the remote secured web service, but worked if only use soapUI to invoke the same remote secured web service directly.
The error message is:
General security error (WSSecurityEngine: No crypto property file supplied for decryption); nested exception is org.apache.ws.security.WSSecurityException: General security error (WSSecurityEngine: No crypto property file supplied for decryption)
In the soap request / reponse message shown in the OSB Test Console, there seems to be two signature sections in the header and encryption section although I tried not to encrypt the soap request. I am using Web Service Client Policy "calpers/wss11_x509_token_with_message_integrity_client_policy_osb" which was created based on "oracle/wss11_x509_token_with_message_protection_client_policy". The difference between the two policies is my policy not to sign nor to encrypt entire body.
In the "Message Signing Setting" section, I unchecked the "Include Entire Body" and left the three default namespaces under the Header Elements.
In the "Message Encrypt Setting" section, I unchecked the "Include Entire Body" and also left the one default namespace under the Header Elements.
I don't know how to attach document here, so i add long saop message here.
 Business Service Testing - BookSec_Biz_Svc_52
 Request Document
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
</soap:Header>
<soapenv:Body>
<book:BookRequest xmlns:book="http://www.dortman.com/books/BookService">
<book:bookId>10</book:bookId>
<book:bookTitle>eric</book:bookTitle>
<book:bookAuthor>Z</book:bookAuthor>
</book:BookRequest>
</soapenv:Body>
</soapenv:Envelope>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<wsse:Security soap:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<wsu:Timestamp wsu:Id="Timestamp-eEud1RcUOPcnV0fDqd6gZQ22" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<wsu:Created>2013-03-14T18:10:00Z</wsu:Created>
<wsu:Expires>2013-03-14T18:15:00Z</wsu:Expires>
</wsu:Timestamp>
<wsse:BinarySecurityToken ValueType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3" EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary" wsu:Id="BST-VnzMtSwHMI8THKi2hhG2SQ22" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
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
</wsse:BinarySecurityToken>
*<dsig:Signature* Id="XSIG-oISn2AADumTdR86sONuz8g22" xmlns:dsig="http://www.w3.org/2000/09/xmldsig#">
<dsig:SignedInfo>
<dsig:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/>
<dsig:SignatureMethod Algorithm="http://www.w3.org/2000/09/xmldsig#hmac-sha1"/>
<dsig:Reference URI="#Timestamp-eEud1RcUOPcnV0fDqd6gZQ22">
<dsig:Transforms>
<dsig:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/>
</dsig:Transforms>
<dsig:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"/>
<dsig:DigestValue>3LQ1IpQR3rKHvP6Ov/m9ZRoecZM=</dsig:DigestValue>
</dsig:Reference>
</dsig:SignedInfo>
<dsig:SignatureValue>X2BUn9TLL26Ay9A3HGEn/mnGCCE=</dsig:SignatureValue>
<dsig:KeyInfo>
<wsse:SecurityTokenReference>
<wsse:Reference URI="#EK-h7saqC1VyBKZw2n1IHz8GQ22" ValueType="http://docs.oasis-open.org/wss/oasis-wss-soap-message-security-1.1#EncryptedKey"/>
</wsse:SecurityTokenReference>
</dsig:KeyInfo>
+*</dsig:Signature>*+
*<dsig:Signature* xmlns:dsig="http://www.w3.org/2000/09/xmldsig#">
<dsig:SignedInfo>
<dsig:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/>
<dsig:SignatureMethod Algorithm="http://www.w3.org/2000/09/xmldsig#rsa-sha1"/>
<dsig:Reference URI="#BST-VnzMtSwHMI8THKi2hhG2SQ22">
<dsig:Transforms>
<dsig:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/>
</dsig:Transforms>
<dsig:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"/>
<dsig:DigestValue>dau9qjB2lxIvlaoDIHuWVHqjulI=</dsig:DigestValue>
</dsig:Reference>
<dsig:Reference URI="#STR-QC3ZDBRwsXv8unEWVns9rQ22">
<dsig:Transforms>
<dsig:Transform Algorithm="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#STR-Transform">
<wsse:TransformationParameters>
<dsig:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/>
</wsse:TransformationParameters>
</dsig:Transform>
</dsig:Transforms>
<dsig:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"/>
<dsig:DigestValue>nPO9mKSC9cMg2fEkGZI+ujy5O1Q=</dsig:DigestValue>
</dsig:Reference>
<dsig:Reference URI="#XSIG-oISn2AADumTdR86sONuz8g22">
<dsig:Transforms>
<dsig:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/>
</dsig:Transforms>
<dsig:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"/>
<dsig:DigestValue>qXkW/ZFFNc8Bu0VL9eF6c4np7IA=</dsig:DigestValue>
</dsig:Reference>
</dsig:SignedInfo>
<dsig:SignatureValue>
MuHCTh5cW8TiVKtkWFl+Of2EFAiHwuPTR7J9b4/n2KZtPy2OCrgi1lBpuzhFKLhoBxYNOK8TMOa/3b223Vv+CQUfUP7z0YVj5Ck7QETYngaQlS07KulnstJjsAgHBV8Zk3A0EafuWF2c3t5wBzEkgEC99v0EdY3mRiCzt7vh2qs=
</dsig:SignatureValue>
<dsig:KeyInfo Id="KeyInfo-0LT1QavoIVXOHesZfrxTwg22">
<wsse:SecurityTokenReference>
<wsse:Reference URI="#BST-VnzMtSwHMI8THKi2hhG2SQ22" ValueType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3"/>
</wsse:SecurityTokenReference>
</dsig:KeyInfo>
+*</dsig:Signature>*+
*<xenc:EncryptedKey* Id="EK-h7saqC1VyBKZw2n1IHz8GQ22" xmlns:xenc="http://www.w3.org/2001/04/xmlenc#">
<xenc:EncryptionMethod Algorithm="http://www.w3.org/2001/04/xmlenc#rsa-oaep-mgf1p">
<dsig:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1" xmlns:dsig="http://www.w3.org/2000/09/xmldsig#"/>
</xenc:EncryptionMethod>
<dsig:KeyInfo xmlns:dsig="http://www.w3.org/2000/09/xmldsig#">
<wsse:SecurityTokenReference wsu:Id="STR-QC3ZDBRwsXv8unEWVns9rQ22" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<wsse:KeyIdentifier ValueType="http://docs.oasis-open.org/wss/oasis-wss-soap-message-security-1.1#ThumbprintSHA1" EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary">q9Z9yPxvNw4CvSLQNI4rxVlSF+w=</wsse:KeyIdentifier>
</wsse:SecurityTokenReference>
</dsig:KeyInfo>
<xenc:CipherData>
<xenc:CipherValue xmime:contentType="application/octet-stream" xmlns:xmime="http://www.w3.org/2005/05/xmlmime">
Tgdhxy6wMJBBrw23iq1GLCm0TYKBXSVQvBcN+7TXdXL6FPSjhcbfXqtoz7wzirbSwUZuu+DrYuWs
0BjRXqw3auUSCMlkm4IoT1ag3wFQQ/PEbB8HNlYhW3gp/At3toTw+k5p9wOUd4BMFAiXyeHQ8+dQ
8JUiohXhiHErTDn6fFQ=
</xenc:CipherValue>
</xenc:CipherData>
</xenc:EncryptedKey>
</wsse:Security>
</soap:Header>
<soapenv:Body>
<book:BookRequest xmlns:book="http://www.dortman.com/books/BookService">
<book:bookId>10</book:bookId>
<book:bookTitle>eric</book:bookTitle>
<book:bookAuthor>Z</book:bookAuthor>
</book:BookRequest>
</soapenv:Body>
</soapenv:Envelope>
 Response Document
The invocation resulted in an error: Internal Server Error.
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soapenv:Body>
<soapenv:Fault>
<faultcode>soapenv:Client</faultcode>
<faultstring xmlns:lang="en">
General security error (WSSecurityEngine: No crypto property file supplied for decryption); nested exception is org.apache.ws.security.WSSecurityException: General security error (WSSecurityEngine: No crypto property file supplied for decryption) </faultstring>
</soapenv:Fault>
</soapenv:Body>
</soapenv:Envelope>
 Response Metadata
<con:metadata xmlns:con="http://www.bea.com/wli/sb/test/config">
<tran:headers xsi:type="http:HttpResponseHeaders" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:tran="http://www.bea.com/wli/sb/transports" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<tran:user-header name="Accept" value="text/xml"/>
<tran:user-header name="Expires" value="Thu, 14 Mar 2013 18:10:01 GMT"/>
<tran:user-header name="SOAPAction" value=""""/>
<http:Cache-Control>max-age=0</http:Cache-Control>
<http:Connection>close</http:Connection>
<http:Content-Type>text/xml; charset=UTF-8</http:Content-Type>
<http:Date>Thu, 14 Mar 2013 18:10:01 GMT</http:Date>
<http:Server>Apache</http:Server>
<http:Transfer-Encoding>chunked</http:Transfer-Encoding>
</tran:headers>
<tran:response-code xmlns:tran="http://www.bea.com/wli/sb/transports">2</tran:response-code>
<tran:response-message xmlns:tran="http://www.bea.com/wli/sb/transports">Internal Server Error</tran:response-message>
<tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">UTF-8</tran:encoding>
<http:http-response-code xmlns:http="http://www.bea.com/wli/sb/transports/http">500</http:http-response-code>
</con:metadata>

WLC: which software-version support SHA2 certificates for Web Authentification and Web Management ?

Hello,
I tried to install new SHA2 3th-Party certificates on our WLCs. There are old WiSM1-Boards and 2504 to support our old 1230 Access Points, running 7.0.251.2, which didn't install it, although the config manual for 7.6 and 8.0 say that SHA2 certificates are supported since 7.0.250.0. When I tried to install the SHA2-certificates I get the message "File transfer failed" an the log says:
*TransferTask: Dec 12 13:22:14.394: #UPDATE-3-CERT_INST_FAIL: updcode.c:1869 Failed to install Webauth certificate. rc = 1
*TransferTask: Dec 12 13:22:14.394: #SSHPM-3-KEYED_PEM_DECODE_FAILED: sshpmcert.c:4085 Cannot PEM decode private key
I tried to install the same certificates on our WiSM2-Boards, running 7.4.121.0 and I failed too. The same certificates could be installed on a 2504 running 8.0.100 without any problems.
In all 3 cases I tried to install unchained certificates for web management and Level 3 chained certificates for web authentication. I used the following guides to get the certificates (e.g. taken from the config manual 8.0.100):
http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/109597-csr-chained-certificates-wlc-00.html
http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/70584-csr-wlc-00.pdf
Which software versions support SHA2 certificates and which didn't ? Is the a list for it ?
Regards

Hello,
I solved the problem. First I used a Debian Linux system with Openssl 1.0.1. After I searched the internet using one of the log messages above I found sites which mentioned to use Openssl 0.9.x. So I tried a productive and security fixes Debian Linux System running Openssl 0.9.8 and I succeeded. The wlcs accepted the certificate files and used it after a reboot. The Web GUI still shows a SHA1 Fingerprint, but the certificate signature Algorithm is SHA2:
Signature Algorithm: sha256WithRSAEncryption
When you check the openssl.org homepage Openssl 0.9.8 is still one of the actual version of openssl and is still available and fixed. But the Openssl Roadmap says:
"We don't want to have to maintain too many branches. This is likely to include a timescale for the EOL of version 0.9.8"
I don't know the differences between certificates made with openssl 0.9.8 and 1.0.1. Is there anybody who can explain it to me ?
Regards

SSL certificates and Web Services Usage inside Oracle Database Questions!

We have implemented a specific business logic using PL/SQL for our client, so we open a file and process each line of this, doing something in the Database and also call a Web Services (Service1) using UTL_HTTP package. Service1 runs in a Windows 2008 Server in the DMZ as Database server.
Service1 is already working, and we can call the service from PL/SQL without troubles.
However, according with security client's policies they requires all Web services be consumed via https including Service1, so we must to follow the procedure established for Oracle in order to enable the calling of service1 via https from the Database.
Our client's DBA and IT Team are concerned about two subjects before to continue to follow the certificate installation:
     - SSL Certificates:
1- Can installed certificates in the Database put in risk the stability of the database?
          2- Can installed certificates in the Database generate performance issues?
          3- Can installed certificates reloading the Databases?
          2- Can installed certificates in the Database generate security issues?
     - Web services:
1- Can web services calling from the Database put in risk the stability of the database?
2- Can web services calling from the Database generate performance issues?
3- Can web services calling from the Database generate security issues in the DMZ?
Could you please give us any clues, about the possible negative impact related with the SSL certificates and Web Services Usage inside Oracle Database, if it’s the case this impact exists?.
Those are the links describing the procedure mentioned above.
1 -http://www.kotti.es/2009/11/oracle-wallet/
DB: Oracle 9i.
Average number of lines in file: 300
Periodicity: Twice at day.

Thiago:
You are correct in that there should be no problem interacting with a Web service that has an HTTPS endpoint as long as you create a wallet and specify it when you make your UTL_HTTP calls, like the PayPal example.
I am not aware of a PL/SQL utility to create a XMLDsig Standard message, but if you find some Java source out there that does it, you may be able to follow a technique I used for a similar use case:
http://jastraub.blogspot.com/2009/07/hmacsha256-in-plsql.html
Regards,
Jason

Self Signed Certificate for Web Proxy 4.0.2

Does anyone have instructions on how to create and install self signed Certificate for Web Proxy Server 4.0.2? My OS is RHEL 4.
Shed.

Unfortunately you will not be able to do that from the GUI.
You will have to use certutil frin proxy-install/bin/proxy/admin/bin/certutil
Make sure that your LD_LIBRARY_PATH includes proxy-install/bin/proxy/lib
(start -shell will give you a shell with all necessary paths set.)
create a file called password-file which contains your password to your cert database
your cert database resides in the alias directory of proxy installation.
certutil -S -s "CN=My Issuer" -n myissuer -x -t "C,C,C" -1 -2 -5 -m 1234
-f password-file -d certdir

Certificate Authority Web Enrollment - CSP states loading

Hello,
I have setup an enterprise sub CA (the root is offline).
I have been able to issue certificates, but I did not have the Web Service, Policy Web Service or the Web Enrollment turned on.
I turned them on yesterday and when I visit the website, when I click Create and submit a request to this CA it takes to the next page where I can request a certificate. I created a duplicate template for the User Certificate and made it available.
I see it in the drop down, however under key options, CSP just says loading. I went to this site:http://support.microsoft.com/kb/939290 and followed the instructions, Active Scripting is enabled and it still
continues to state loading.
I am at a complete loss as to what the problem might be. Event logs on CA server are clean, no errors or warning.
Any suggestions?
Update: I tried to get to the site from the actual CA server and it displays the The Web site is attempting to perform a digital certificate operation on your behalf, etc...
And it populated the CSP.
I tried it from another server and it worked.
I tried it from another workstation and it shows loading in the CSP.
Has anyone run into this issue?

Hi,
As this works on one of your servers, whether all your workstation have this issue?
Certificate Enrollment Web Services client computers must be computers running at least Windows 7 or Windows Server 2008 R2 operating systems. To utilize key-based renewal, client computers must be running at least Windows 8 or Windows Server 2012 operating
systems.
Please follow the below article for more details:
http://social.technet.microsoft.com/wiki/contents/articles/7734.certificate-enrollment-web-services-in-active-directory-certificate-services.aspx
Regards,
Yan Li
Regards, Yan Li

Some web sites no longer contain a " cart" when attempting to order thier product.

Some web sites no longer contain a "Cart" when attempting to order their product. The companies claim that there is nothing wrong on their end.

'''Try the Firefox SafeMode''' to see how it works there. 
''A troubleshooting mode, which disables most Add-ons.'' 
[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode#w_safe-mode-window_2 Troubleshoot Firefox issues using Firefox SafeMode]
When in Safe Mode... 
* The status of plug-ins is not affected.
* Custom preferences are not affected.
* All extensions are disabled.
* The default theme is used, without a persona.
* userChrome.css and userContent.css are ignored.
* The default toolbar layout is used.
* The JIT Javascript compiler is disabled.
* Hardware acceleration is disabled.
* You can open the Firefox 15.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes 
Or it might be caused by Hardware Acceleration.
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

Sorry, we couldn't open your file using this feature. Visio Web Access is not available on this site.

Recently installed Service Pack 1 in SharePoint Server 2013 Farm, post upgrade we are experiencing issue when opening visio documents:
I am trying to open .vsdx (visio 2013) file but encounter following issue:
Sorry, we couldn't open your file using this feature. Visio Web Access is not available on this site.
Under Document library-->Library settings-->Advanced Settings
Still I cant open file in browser as we always used to. Unfortunately we don't have Visio services in Farm.
can you share your experiences regarding this issue post Sp1 SharePoint Server 2013.
Thank You

Hi Octopus,
Based on the error message, it seems that the Visio Graphics Service is not started or the Enterprise feature is not enabled.
I recommend to check the things below:
Go to Central Administration > System Settings > Manage service on server > check if the Visio Graphics Service is started > then click Application Management > Manage service applications > check if the Visio Graphics Service application
is created.
Go to the root site settings page of the site where you got this error, click Site collection features to check if the SharePoint Server Enterprise Site Collection Features is enabled.
Go to the site settings page of the site where you got this error, click Manage site feature to check if the SharePoint Server Enterprise Site Features is enabled.
More information about the Visio Graphics Service:
http://tutorial.programming4.us/windows_server/microsoft-sharepoint-2013---looking-at-visio-services-(part-3)---visio-graphics-service-service-application.aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support

I recently downloaded a web page but then i deleted history which deleted the web page. there is still a short cut to it but says file does not exist. can i retrieve this as web page no longer exixts

as the question states i downloaded a web page but before i put it on a memory stick i changed the options on my firefox and the file is no longer there.
there is a shortcut in the 'recently changed' folder in windows explorer but when i click on it it says the file has moved or no longer exists.
Is there anyway to retrieve this as the web page no longer exists

Try:
*Extended Copy Menu (fix version): https://addons.mozilla.org/firefox/addon/extended-copy-menu-fix-vers/

HP Truevision HD web cam no longer working with Skype since windows 8.1 update

Hi guys,
A major annoying problem as occured since i updated to windows 8.1 my web cam no longer works in skype, it works for everything elese youcam etc just not skpye, audio is working fine too. When i go into settings the programmes freezes and eventually crashes, I can see my webcam listed in skype but thats it, the bottom half of the pane is missing too it cuts out in the middle of clear history, rolled back the driver and it works but messes everything else up. Please help i am ripping my hair out..... thank you

odizzle7,
Welcome to the HP Forum.
Skype does run on Windows 8.1, although you may need to update Skype to at least version 6.16.0.105
If you have more issues, please do consider opening a New Post of your own.
This Thread is from last year and is not monitored by our Experts team.
Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer is a good Fix or Workaround!
Kind Regards,
Dragon-Fur

Im trying to buy a song from a album but i get error that it is no longer available. The other songs is working and its a new album. I typer in the wrong password on this song. Could that be the issue?

Im trying to buy a song from a album but i get error that it is no longer available. The other songs is working and its a new album. I typer in the wrong password on this song. Could that be the issue?

Never rely upon the iTunes Store to always have your purchases. Always keep a copy of everything safe on a backup drive at home.
"After you download your purchases, back up your iTunes library. Previous purchases may be unavailable if they've been refunded or aren't on the iTunes Store." - http://support.apple.com/kb/ht2519

Match will not upload tracks no longer available in the Store?

I purchased and album on 2/4/2007 (see below) which is apparently no longer available in the iTunes store.
I understand that some music that was once available might be removed from the store for copyright reasons. Because these tracks were protected AAC files Match will not upload them.
Is there any thing I can do to get these tracks into Match and therefore available to all of my devices?

He just does not want to update his Logic Pro X. It's his preference.
Thanks for the help He just wants to keep it version 10.0.6 as it is the way he bought just like a person wants to keep their Mac OS X for example 10.0.2.

I just upgraded to Lion and switched my web page from MobileMe to Godaddy. But since upgrading to Lion a video I placed on my web page no longer shows up. instead I get "plug-in failure". That didn't happen until the Lion Upgrade what do I do?

I just upgraded to Lion and switched my web page from MobileMe to Godaddy. But since upgrading to Lion a video I placed on my web page no longer shows up. instead I get "plug-in failure". That didn't happen until the Lion Upgrade what do I do?

What's the format of your video? That will give you a hint as to what plugin is failing (or missing).
If you don't know, what's the URL of your site - it shouldn't take long for someone to work out the specifics.

X2100 m2 - elom - wrong certificate uploaded, web ui no longer available

Similar Messages

Maybe you are looking for