X264-git and GPAC error [SOLVED]

I'm currently having problems with compiling x264 from git with support for GPAC on 64 bit. It makes no difference if I'm using GPAC 0.4.4 or CVS. The error is simply this:
gcc wrote:/usr/bin/ld: cannot find -lgpac_static
The only relevant search I came up with has this solution:
http://mailman.videolan.org/pipermail/x … 01917.html
This doesn't work because gpac_static.a doesn't exist here. The only thing I could think of was to try get GPAC to create a static library, and that changed nothing. Is anyone here able to get this working lately? I'd really like to get mp4 functionality back in x264.
Last edited by skottish (2008-05-21 15:37:16)

Thanks daneel971. I appreciate your help.
I removed the version of GPAC that I had on my system to try to diagnose my build problems after doing what you and another user at doom9 suggested. So, I tried that "old" way. Of course I would use a PKGBUILD for this normally, but it wasn't working and this is a good test to make sure that I didn't screw anything up with my modifications. 'configure' works fine. Either I'm really dumb today or something is very wrong here.
[skottish@iasE gpac]$ make
make -C src all
make[1]: Entering directory `/home/skottish/gpac/src'
gcc -O3 -fPIC -DPIC -fno-strict-aliasing -Wno-pointer-sign -Wall -I/home/skottish/gpac/include -c -o utils/os_divers.o utils/os_divers.c
utils/os_divers.c: In function 'gf_sys_get_rti':
utils/os_divers.c:1143: warning: format '%lld' expects type 'long long int *', but argument 3 has type 'u64 *'
utils/os_divers.c:1146: warning: format '%lld' expects type 'long long int *', but argument 3 has type 'u64 *'
gcc -O3 -fPIC -DPIC -fno-strict-aliasing -Wno-pointer-sign -Wall -I/home/skottish/gpac/include -DGPAC_IPV6 -c -o utils/os_net.o utils/os_net.c
utils/os_net.c: In function 'gf_sk_connect':
utils/os_net.c:407: warning: cast from pointer to integer of different size
utils/os_net.c:417: warning: cast from pointer to integer of different size
utils/os_net.c: In function 'gf_sk_bind':
utils/os_net.c:517: warning: cast from pointer to integer of different size
utils/os_net.c:533: warning: cast from pointer to integer of different size
utils/os_net.c: In function 'gf_sk_setup_multicast':
utils/os_net.c:738: warning: cast from pointer to integer of different size
utils/os_net.c:762: warning: cast from pointer to integer of different size
gcc -O3 -fPIC -DPIC -fno-strict-aliasing -Wno-pointer-sign -Wall -I/home/skottish/gpac/include -c -o utils/os_module.o utils/os_module.c
gcc -O3 -fPIC -DPIC -fno-strict-aliasing -Wno-pointer-sign -Wall -I/home/skottish/gpac/include -c -o utils/os_thread.o utils/os_thread.c
utils/os_thread.c: In function 'RunThread':
utils/os_thread.c:97: warning: cast to pointer from integer of different size
gcc -O3 -fPIC -DPIC -fno-strict-aliasing -Wno-pointer-sign -Wall -I/home/skottish/gpac/include -c -o utils/list.o utils/list.c
gcc -O3 -fPIC -DPIC -fno-strict-aliasing -Wno-pointer-sign -Wall -I/home/skottish/gpac/include -c -o utils/base_encoding.o utils/base_encoding.c
gcc -O3 -fPIC -DPIC -fno-strict-aliasing -Wno-pointer-sign -Wall -I/home/skottish/gpac/include -c -o utils/bitstream.o utils/bitstream.c
gcc -O3 -fPIC -DPIC -fno-strict-aliasing -Wno-pointer-sign -Wall -I/home/skottish/gpac/include -c -o utils/color.o utils/color.c
In file included from /home/skottish/gpac/include/gpac/events.h:34,
from /home/skottish/gpac/include/gpac/user.h:35,
from utils/color.c:26:
/home/skottish/gpac/include/gpac/math.h:41:18: error: math.h: No such file or directory
make[1]: *** [utils/color.o] Error 1
make[1]: Leaving directory `/home/skottish/gpac/src'
make: *** [lib] Error 2
[skottish@iasE gpac]$ ls /home/skottish/gpac/include/gpac/
avparse.h esi.h media_tools.h nodes_svg_sani.h svg_types.h
base_coding.h events.h mediaobject.h nodes_x3d.h sync_layer.h
bifs.h ietf.h module.h options.h term_info.h
bifsengine.h internal modules path2d.h terminal.h
bitstream.h ismacryp.h mpeg4_odf.h renderer.h thread.h
color.h iso639.h mpegts.h scene_manager.h token.h
config.h isomedia.h network.h scenegraph.h tools.h
constants.h laser.h nodes_mpeg4.h scenegraph_svg.h user.h
crypt.h list.h nodes_svg_da.h scenegraph_vrml.h utf.h
download.h math.h nodes_svg_sa.h setup.h xml.h
GPAC doesn't like itself and x264 doesn't like it either...
Last edited by skottish (2008-05-19 01:02:36)

Similar Messages

Pacman downloading slowly and signature errors [Solved]

So, I'm trying to do a clean install of Arch Linux. I've chrooted into the system and tried to download wireless_tools, netcfg, and dialog to set up my wireless connection but ran into two issues. First, sometimes I would get a message that says something like:
error: failed retrieving file 'wireless_tools-29-7-x86_64.pkg.tar.xz' from mirror.us.leaseweb.net : Operation too slow. Less than 1024 bytes/sec transferred the last 10 seconds
From what I gathered then it should try the next mirror in my mirrorlist until it finds one with a decent speed. However, then it checks the package integrity and I get more error messages. For each package there's a message like:
error: wireless_tools: signature from "Gaetan Bisson <[email protected]>" is invalid
and then:
error: failed to commit transaction (invalid or corrupted package (PGP signature))
Any ideas on what's causing this/how to fix it?
Last edited by TKing (2012-10-02 21:45:47)

Did you set the hostname in both files:
https://wiki.archlinux.org/index.php/Be … e#Hostname
/etc/hostname
Needs to just contain one line, the hostname.
/etc/hosts
You need to edit two of the lines to the exact same text string you put in /etc/hostname
My /etc/hostname:
Jeremiah
My /etc/hosts:
# /etc/hosts: static lookup table for host names
#<ip-address> <hostname.domain.org> <hostname>
127.0.0.1 Jeremiah localhost
::1 Jeremiah localhost
# End of file
If those three different text entries do not exactly match then you will have network troubles.

No sound (but beep present) and vlc error [Solved]

Hello,
I don't know why but after reboot Arch, I don't have any sound except I can hear the beep. I try different methods to have sound again. But none of them worked.
I really don't know what to do.
If it cant help , the output of cat /proc/asound/cards is:
0 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xd4520000 irq 54
1 [Generic ]: HDA-Intel - HD-Audio Generic
HD-Audio Generic at 0xd4420000 irq 55
I have a .asoundrc in my home which is:
pcm.!default {
type hw
card 0
ctl.!default {
type hw
card 0
When I test that command: speaker-test -c 2.
I hear nothing and the output is :
Playback device is default
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 64 to 1048576
Period size range from 32 to 524288
Using max buffer size 1048576
Periods = 4
was set period_size = 262144
was set buffer_size = 1048576
0 - Front Left
1 - Front Right
When I run vlc i have a error which is :
pulse audio output error: PulseAudio server connection failure: Connection refused.
I think that error is because I install pulseaudio. But when I change the audio device with PCH or Generic, I have this error:
mpgatofixed32 audio converter error: libmad error: bad main_data_begin pointer.
And sound it's not working in any browser. But what I find weird it's I can't hear sound like music but I can still hear the beep when I'm on a tty.
I thank you in advance for your help.
Last edited by sylflo (2013-10-09 08:13:27)

You should avoid using card number in your .asoundrc. Using card name is recommended, since soundcards may be recognised in different order at boot. It may interfere with modules. So assuming your default card name is PCH use following code:
pcm.!default {
type hw
card PCH
ctl.!default {
type hw
card PCH
Instead of simply using speaker-test try
aplay -D PCH /usr/share/sounds/alsa/Front_Left.wav
#eventually
aplay -D plughw:PCH /usr/share/sounds/alsa/Front_Left.wav
#or
speaker-test -D PCH
to test a specific card directly.
Next check your loaded sound modules. Your should have snd-hda-intel specified to load somewhere in /etc/modules-load.d, so to check this you can use:
grep -Ri snd /etc/modules-load.d
#also check what you have loaded
lsmod | grep snd_hda
From what I understand your hardware is, you should have snd-hda-intel model=pch loaded. Check /etc/modprobe.d also. Maybe it got changed in the upgrade.
The reason your hearing sound is that you have pcspkr module loaded and I assume most engineers design a hardware mix/mux between internal and external speakers in laptops, even though they seem to be two different devices. You should be able to use beep or something similar in X to test it.
Is a user required to be in audio user group to use pulseaudio? Is the pulseaudio server running?
Do you have a HDMI output on your laptop? I think the second soundcard is from your graphicscard and they usually use only one digital output, so if that card is used as primary you will not hear a thing.
Last edited by emeres (2013-10-09 07:21:58)

Bootcamp: hal.dll and disk error SOLVED. Simple workaround

Many people had the "hal.dll missing" and "No disk" error while trying to install Windows with bootcamp on OSX leopard. I read a lot of workarounds and solutions, which some are complicated and some just don't work.
Here is my simple workaround to get rid of errors:
(Principle: force the shell of windows to appear before installation, so that we can quick format the bootcamp partition with" format" command)
1. Create a windows partition with bootcamp as usual (if you have already one then restore the OSX partition)
2. Restart and boot on windows cd. (press the option key ("alt") during restart)
3. When bluescreen appears and drivers are loading, press repeatedly F6 and F10. You should get a message that no SCSI disk was found and that you should press "S" or "enter" to continue. Press "enter". Now you should get a black screen in console mode.
4. Now we format the bootcamp partition. Type this: "FORMAT C: /Q /FS:NTFS". Put FAT32 instead of NTFS if you want the file system to be FAT32.
5. Press 'Y' to confirm.
6. Restart the computer, boot on cd, and install windows as usual. When arrived on partitionning during install, DO NOT REFORMAT!!!! Install on the partition that we just created before!
PS: I think that bootcamp just messes up the windows partition. That's why you get "disk error". When formatting during the windows installation, the partition is correct for windows but it overwrites entirely the bootcamp partition instead of just formatting it. I think that the quick format from the shell does just change the file system without modifying the partition itself. However, it works, so why bother why it does?....
Let me know if you have difficulties.
Message was edited by: febex

Perhaps you need to use an XP cd with sp2 slipstreamed, install boot camp update 2.1, then SP3.
The following URL has a note: --> http://support.apple.com/downloads/BootCamp_Update_2_1_for_WindowsXP
Important: Installation of Boot Camp 2.1 is required before installing Windows XP Service Pack 3 (SP3)

[SOLVED] Unable to compile ffmpeg-mt-git and mlt-git

I get the following error when compiling ffmpeg-mt-git
LD libavcodec/libavcodec.so.52
/usr/bin/ld: /usr/lib/gcc/x86_64-unknown-linux-gnu/4.6.0/../../../../lib/libx264.a(common.o): relocation R_X86_64_32 against `.rodata.str1.1' can not be used when making a shared object; recompile with -fPIC
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.6.0/../../../../lib/libx264.a: could not read symbols: Bad value
collect2: ld a retourné 1 code d'état d'exécution
make: *** [libavcodec/libavcodec.so.52] Erreur 1
I then modified PKGBUILD and added "--enable-pic" to the .configure line but still get the same above message.
Just to make sure I recompiled x264-git (no error) and tried again but still the same error.
Has anyone experienced this problem?
Thanks
Alphazo
I've been able to compile the regular, non-mt, ffmpeg-git. Now I'm getting the same kind of error with mlt-git:
producer_avformat.c: In function ‘producer_get_image’:
producer_avformat.c:1086:59: attention : transtypage vers un pointeur depuis un entier de taille différente [-Wint-to-pointer-cast]
producer_avformat.c:1481:37: attention : transtypage vers un pointeur depuis un entier de taille différente [-Wint-to-pointer-cast]
cc -shared -o ../libmltavformat.so factory.o filter_avcolour_space.o filter_avresample.o filter_avdeinterlace.o filter_swscale.o producer_avformat.o consumer_avformat.o -Wl,--hash-style=gnu -Wl,--as-needed -Wl,--no-undefined -Wl,--as-needed -Wl,--no-undefined -Wl,--as-needed -L../../framework -lmlt -lpthread -Wl,--no-undefined -Wl,--as-needed -lavformat -lavcodec -lavutil -lswscale -lavdevice
/usr/bin/ld: /usr/lib/gcc/x86_64-unknown-linux-gnu/4.6.0/../../../../lib/libavformat.a(allformats.o): relocation R_X86_64_32 against `ff_a64_muxer' can not be used when making a shared object; recompile with -fPIC
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.6.0/../../../../lib/libavformat.a: could not read symbols: Bad value
collect2: ld a retourné 1 code d'état d'exécution
Last edited by alphazo (2011-04-23 21:20:13)

To compile ffmpeg-mt-git I had to remove "--shared" from PKGBUILD.
For mlt-git I had to go back to regular ffmpeg (Extra).
In the end to get kdenlive-svn working I had to use: x264 (extra), ffmpeg (extra), mlt-git (aur).

Most common BW data load errors in production and how to solve them ..

Hi All,
Most common BW data load errors in production and how to solve them ..
Any doc on it ,if so plz send it across to this id [email protected]
Thanks in advance.
Rgrds
shoba

hi
1) RFC connection lost.
2) Invalid characters while loading.
3) ALEREMOTE user is locked.
4) Lower case letters not allowed.
5) While loading the data i am getting messeage that 'Record
the field mentioned in the errror message is not mapped to any infoboject in the transfer rule.
6) object locked.
7) "Non-updated Idocs found in Source System".
8) While loading master data, one of the datapackage has a red light error message:
Master data/text of characteristic 'so and so' already deleted .
9) extraction job aborted in r3
10) request couldnt be activated because theres another request in the psa with a smaller sid
11) repeat of last delta not possible
12) datasource not replicated
13) datasource/transfer structure not active ´
14) Idoc Or Trfc Error
15. ODS Activation Error

What is the error code mean? And how to solve it ?Please give your answer. Thanks

What is the error code mean? And how to solve it ？Please give your answer. Thanks
Attachments:
QQ截图20140403134626.png ‏59 KB

duplicate post
LabVIEW Champion . Do more with less code and in less time .

HT201210 what is error 409 and how to solve the error

i was trying to restore my iphone but it give an error 409
what does this mean and how to solve it

Why apple technical support will help the apple customer to solve this problem ??????????
the complication of apple products let most of my county's people use SAMSUNG phones

Quickly!Quickly!Quickly!What is the error code mean? And how to solve it ?Please give your answer. Thanks

What is the error code mean? Why is there an error?And how to solve it ？Please give your answer. Thanks！
——1110340026
Attachments:
QQ图片20140403140655.jpg ‏108 KB

Sannieboyyyy wrote:
Could be me, but your VI is not working properly on the english version of LV. Can I suggest you to try programming in English in the future?
Yes, it's you. The VI is working just fine, except for some cosmetic issues with the labeling. I don't think is is a valid suggestion to force somebody to program in a specific language, especially since LabVIEW supports all these languages.
Here are the problems with the VI:
If you don't want an amplitude of zero, you need to set the amplitude control to a nonzero value before running. Simple as that!. (You could also set the input range for the amplitude control to exclude zero or use a case structure to skip certain code if the amplitude is zero).
You could also wire the error output to an indicator so it simply displays the errors, but keeps running.
Your while loop is currently useless. You can delete it and the program function will not change. Use a stop button at the loop condition.
Your while loop needs some timing so it runs at a reasonable rate. Either add a small wait or configure the signal generation to "simulate acquisition timing" instead of "run as fast as possible".
LabVIEW Champion . Do more with less code and in less time .

Processchain errors in Production and how to solve those issues

Dear All,
Please share some process chain errors in production and how to solve those errors as well,
Please send me if any one have the list of errors and how you are solved those..
I am very new to BW,am also preparing my list of errors and solutions to fix them..Please share me if any one have ?
Thanks

Hi
Table of Contents
1.     Time stamp error     2
2.      PSA error records     4
3.      SID not found for characteristic     7
4.      Error calling number range object     8
5.      Trfc error     10
6.      ALE REMOTE lock     13
7.      Delta fails     14
8.      Deleting setup table     18
9.      How to run statistical setup for different Application components     19
10. How to do selective deletion     22
11. Roll up     24
11. Compression or collapse     25
12. How to do Attribute change run     27
1.Time stamp error
Resolution procedure
Go to RSA1Source system
Run program RS_TRANSTRU_ACTIVATE_ALL
Mention source system and Info source and then execute.
Now the transfer structure will be automatically activated.
Then proceed with the reload, it will get success now.
2. PSA error records
Go to details tab, we will find its packet no. and its record no.
Resolution procedure
Click on PSA icon in monitor and select the error data packet
Double click on error record and edit it to the correct value,
select save.
Now update from PSA to target by selecting the option Start update immediately.
3. SID not found for characteristic
Resolution procedure
a. Remove the failed request from data target by making its QM status into red.
b. Load Master data for characteristic using full update.
c. Then reload the transactional data.
4. Error calling number range object
Resolution procedure
Note down the assigned dimension into the cube for 0VAL_TYPE
copy the dimension name
Go to RSRV transaction
Tests in Transaction RSRV -> All Elementary Tests ->Transactional Data then double click on Comparison of Number Range of a Dimension and Maximum DIMID- then click on the right pane in same->Mention the cube name and dimension name, click on enter.
Then click on correct error. It will correct the error.
5. Trfc error
Resolution procedure
Go to SM58
Go to edit->Execute LUW.
Then do refresh in monitor.
Now it will pick the records and the load will get success.
Some times we found that some packets will not get updated even if the extraction is showing as complete.
Do manual update of each packet
6. ALE REMOTE lock
Resolution procedure
This can happen when user or ALEREMOTE is accessing the same table
a.     Remove failed request from data target by making its QM status into red.
b.     Check into sm12 and delete the lock, usually the BASIS deletes them
c.     Reload the package
7. Delta fails
Resolution procedure
R/3->BW
Data is coming from R/3 then make the request technical status red in monitor and remove the request from manage.
go to info package restart the load, then you will get a pop up saying that repeat of last delta click on request again.
Go back to manage and look for the delta type, it will show as Repeat of last delta.
BW->BW(Data mart)
Delta load failed from ODS to cube/any data mart.
Make its technical status as red
Go to manage and remove the failed request by making its QM status as red.
It is updating from ODS, so we have to remove the data mart status in ODS manage, before restarting delta
If you click on data mart status it will pop up a window
Click on delete icon, select YES and then ok.
Now refresh manage the data mart status will get deleted.
If you load now the failed delta will get success.

TS3694 My iPad2 has repeatedly refused to update to iOS7, whether connected to a PC or not. The error message indicates an unknown error has occurred, with error code 6. Does anyone have any idea what the problem might be and how to solve it? Many than

My iPad2 has repeatedly refused to update to iOS7, whether connected to a PC or not. The error message indicates an unknown error has occurred, with error code 6. Does anyone have any idea what the problem might be and how to solve it? Many thanks.

Hi
I followed this guy's instructions and it worked:
http://evsiphone.blogspot.com/2009/05/iphone-iphone-could-not-be-restored.html
I did disable the security (AVG and Zone Alarm) when I tried on my own PC. My wife's laptop which eventually got it working also uses AVG and Zone Alarm but on an XP O/S whereas my PC is Vista - maybe this is why.
Cheers for you help.
Andy
Message was edited by: bigbadandy

When I signin Apple ID showing error 403 on my mobile. What is the reason? And how can solve it?

When I signin Apple ID showing error 403 on my mobile. What is the reason? And how can solve it?

This often means that the maximum of 3 iCloud accounts have already been created on the phone and it cannot create another account. When this happens, all you can do is re-use one of the accounts previously created or creat your account using a different iOS device or Mac, if you have one.

Undocumented problem solved with 16-bit pcmcia and irq error

I am having the exact same problem as described in the following post:
"Undocumented problem solved with 16-bit pcmcia and irq error."
"I'm using a DAQ Card (AI-16E-4), which didn't work properly in MAX. MAX complained that the card didn't respond to an interrupt request.
I've had this issue for a while, but dropped it, since NI support told me nothing could be done about it. Meanwhile, a seemingly unrelated problem with a wireless pcmcia network card arose. Cisco had no clue what was wrong with their card either, but I found Microsoft Knowledge Base Article Q327947. It seems that Win2k (they claim SP3 and up) disables ISA to PCI routing, which is what causes this problem.
To fix it, open regedit
and navigate to "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\Pcmcia\Parameters"
edit or create the DWORD value "DisableIsaToPciRouting" and set the value data to 0.
See Microsoft's article for further details: http://support.microsoft.com/default. aspx?scid=kb;en-us;327947"
The difference is that I am using WinXP and the Regedit fix does not solve the problem. Does anybody know how he was able to continue to use the card before he solved the problem? The card works fine in MAX, but errors out in LabVIEW.

Hey Willy,
Here some additional suggestions that have corrected some PCMCIA difficulties in the past besides the registry edit you suggested.
1. General Troubleshooting to Verify Correct Hardware and Software Installation
Uninstall the PC Card hardware through Device Manager
Remove the PC Card from the laptop
Uninstall the NI-DAQ software
Follow the normal installation instructions (the most important step to remember for Plug-n-Play Operating Systems is to install the software first)
Try the latest service packs for Win 2000 or Win XP
Try the PC Card in a different laptop
Try a different slot in the laptop. On certain laptops PC Cards have been successfully installed in the top PCMCIA slot instead of the bottom.
2. Additional Troubleshootin
g for PC Cards that Return IRQ Conflicts
For E-Series DAQCards:
Update to NI-DAQ 6.9.3 first and then update NI-PAL to version 1.6.1 (included exe file).
Download the attached NI-PAL (ni-cdu1610.exe), and run the installer. When receiving the error "The device is not responding to the first IRQ Level" in Measurement and Automation Explorer, try this method of upgrading NI-PAL
3. Additional Troubleshooting Steps
Try disabling the 3COM adapter, and any other extraneous (for now) devices like any built in serial and parallel ports. The best way to do this is probably to disable them in the BIOS. If the PCMCIA card works properly then try to reconfigure disabled devices one at a time.
Make sure the latest BIOS is installed.
Check for any unusual PCMCIA drivers or other software that might interfere with the PCMCIA driver.
I hope this helps.
Ron
Applications Engineering
National Instruments
Attachments:
ni-cdu1610.exe ‏1557 KB

Apple, please solve the -50 and 1418 error issue

Dear Apple,
I have read during hours this forum and also posting my own experiences. Does anyone have a solution to these -50 and 1418 errors? Apple has exchanged my 2G Shuffle twice already, but no solution. I strongly suspect it to be an iTunes software issue or incompatibility, since the Shuffle is being recognized perfectly under Windows XP explorer and I can copy and read any files from the computer to the shuffle and vice versa. But as soon as I start iTunes, the Shuffle disappears in the Windows explorer, is being recognized in iTunes but then it stops: error -50, "The disk cannot be written to or read from", error 1418 when trying to restore, no music synching and no restoring possible.
HELP PLEASE
Windows XP Pro

http://docs.info.apple.com/article.html?artnum=304508

I have updated my iTunes to the latest edition and now my iTunes wont open saying MSVCR80.dll is missing from my computer and that i have to reinstall itunes. I have tried reinstalling twice now and this error message keeps appearing. What is going on?

I have updated my iTunes to the latest edition and now my iTunes will not open saying MSVCR80.dll is missing from my computer and that i have to reinstall itunes. I have tried reinstalling twice now and this error message keeps appearing. What is going on?

Solving MSVCR80 issue and Windows iTunes install issues.

X264-git and GPAC error [SOLVED]

Similar Messages

Maybe you are looking for