X2go fails to get Client Login working!

Following the wiki: http://wiki.archlinux.org/index.php/X2go I setup my Desktop as x2go Server and try to login from a notebook from local network (Both with Archlinux) Login fails with:
Write problem at /home/'USER'/.x2go/ssh/socaskpassGHTZF
First i try x2goclient-gtk and then x2goclient-cli but it fails too...
It seems like the x2go client could not write to the users homedir?
please help!!
HURRAY I GOT 100 POSTS!!! Where is my netbookprice?
Last edited by killajoe (2010-04-07 19:25:13)

Write problem at /home/'USER'/.x2go/ssh/socaskpassGHTZF
Why are you trying to connect as 'USER' (including quotes)? Can you successfully ssh into the machine?

Similar Messages

OS Deployment - Failed to get client identity 80004005

Hello all,
Hopefully someone will have a solution to this issue. I've only found one site with a similar problem (http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=2352753&SiteID=17) and the solution was to rebuild the SCCM server, which I have done. Yet the issue persists. After working my way through countless issues with SCCM, this seems to be the only obstacle in my way. Here is the situation:
1. I boot the bare metal client system to PXE and the boot image loads
2. The SCCM status messages appear "Windows is starting up..." and then "Preparing Network Connections..."
3. The client machine hangs for a minute or so, then reboots.
I have enabled the command prompt shell in the boot image and can ping the SCCM server and name resolution work fine, so I know it isn't an issue with the network drivers. Below is the log information from the client. Just as an FYI, the Server is running in "Mixed Mode", so I'm not really understanding the why the identification is an issue. As best I can understand the client is requesting information from the server at a certain point and getting a blank reply.
<![LOG[MP Ports: http=80, https=443, default=80]LOG]!><time="09:20:53.765+000" date="06-10-2008" component="TSPxe" context="" type="1" thread="1324" file="tsmediawizardcontrol.cpp:551">
<![LOG[Missing root CA environment variable from variables file]LOG]!><time="09:20:53.765+000" date="06-10-2008" component="TSPxe" context="" type="1" thread="1324" file="tsmediawizardcontrol.cpp:561">
<![LOG[Custom hook from X:\\TSConfig.INI is ]LOG]!><time="09:20:53.765+000" date="06-10-2008" component="TSPxe" context="" type="1" thread="1324" file="tsmediawizardcontrol.cpp:594">
<![LOG[No custom hook found]LOG]!><time="09:20:53.765+000" date="06-10-2008" component="TSPxe" context="" type="1" thread="1324" file="tsmediawizardcontrol.cpp:442">
<![LOG[No Need to create Authenticator Info]LOG]!><time="09:20:53.765+000" date="06-10-2008" component="TSPxe" context="" type="1" thread="1324" file="tsmediawizardcontrol.cpp:720">
<![LOG[Getting MP time information]LOG]!><time="09:20:53.781+000" date="06-10-2008" component="TSPxe" context="" type="1" thread="1324" file="tsmediawizardcontrol.cpp:731">
<![LOG[Requesting client identity]LOG]!><time="09:20:54.000+000" date="06-10-2008" component="TSPxe" context="" type="1" thread="1324" file="libsmsmessaging.cpp:4574">
<![LOG[CLibSMSMessageWinHttpTransport:end: URL: sccm.mpmc.hos:80 CCM_POST /ccm_system/request]LOG]!><time="09:20:54.062+000" date="06-10-2008" component="TSPxe" context="" type="1" thread="1324" file="libsmsmessaging.cpp:6043">
<![LOG[pNext != NULL, HRESULT=80004005 (e:\nts_sms_fre\sms\framework\osdmessaging\libsmsmessaging.cpp,1825)]LOG]!><time="09:20:54.109+000" date="06-10-2008" component="TSPxe" context="" type="0" thread="1324" file="libsmsmessaging.cpp:1825">
<![LOG[reply has no message header marker]LOG]!><time="09:20:54.109+000" date="06-10-2008" component="TSPxe" context="" type="3" thread="1324" file="libsmsmessaging.cpp:1825">
<![LOG[DoRequest (sReply, true), HRESULT=80004005 (e:\nts_sms_fre\sms\framework\osdmessaging\libsmsmessaging.cpp,4674)]LOG]!><time="09:20:54.109+000" date="06-10-2008" component="TSPxe" context="" type="0" thread="1324" file="libsmsmessaging.cpp:4674">
<![LOG[Failed to get client identity (80004005)]LOG]!><time="09:20:54.109+000" date="06-10-2008" component="TSPxe" context="" type="3" thread="1324" file="libsmsmessaging.cpp:4795">
<![LOG[ClientIdentity.RequestClientIdentity (), HRESULT=80004005 (e:\nts_sms_fre\sms\client\tasksequence\tsmbootstrap\tsmediawizardcontrol.cpp,793)]LOG]!><time="09:20:54.109+000" date="06-10-2008" component="TSPxe" context="" type="0" thread="1324" file="tsmediawizardcontrol.cpp:793">
<![LOG[failed to request for client]LOG]!><time="09:20:54.109+000" date="06-10-2008" component="TSPxe" context="" type="3" thread="1324" file="tsmediawizardcontrol.cpp:793">
<![LOG[Exiting TSMediaWizardControl::GetPolicy.]LOG]!><time="09:20:54.109+000" date="06-10-2008" component="TSPxe" context="" type="0" thread="1324" file="tsmediawizardcontrol.cpp:1083">
<![LOG[GetPolicy(), HRESULT=80004005 (e:\nts_sms_fre\sms\client\tasksequence\tsmbootstrap\tsmediawizardcontrol.cpp,2007)]LOG]!><time="09:20:54.109+000" date="06-10-2008" component="TSPxe" context="" type="0" thread="1324" file="tsmediawizardcontrol.cpp:2007">
<![LOG[RunWizardForPXE(), HRESULT=80004005 (e:\nts_sms_fre\sms\client\tasksequence\tsmbootstrap\tsmediawizardcontrol.cpp,2308)]LOG]!><time="09:20:54.125+000" date="06-10-2008" component="TSPxe" context="" type="0" thread="1324" file="tsmediawizardcontrol.cpp:2308">
<![LOG[oTSMediaWizardControl.Run( sMediaRoot, true, true ), HRESULT=80004005 (e:\nts_sms_fre\sms\client\tasksequence\tsmbootstrap\tsmbootstrap.cpp,936)]LOG]!><time="09:20:54.125+000" date="06-10-2008" component="TSPxe" context="" type="0" thread="1324" file="tsmbootstrap.cpp:936">
<![LOG[Execute( eExecutionEnv, sConfigPath, sTSXMLFile, uBootCount, &uExitCode ), HRESULT=80004005 (e:\nts_sms_fre\sms\client\tasksequence\tsmbootstrap\tsmbootstrap.cpp,1045)]LOG]!><time="09:20:54.125+000" date="06-10-2008" component="TSPxe" context="" type="0" thread="1324" file="tsmbootstrap.cpp:1045">
<![LOG[Exiting with return code 0x80004005]LOG]!><time="09:20:54.125+000" date="06-10-2008" component="TSPxe" context="" type="1" thread="1324" file="tsmbootstrap.cpp:1057">
<![LOG[Execution complete.]LOG]!><time="09:20:54.171+000" date="06-10-2008" component="TSBootShell" context="" type="1" thread="844" file="bootshell.cpp:620">
<![LOG[Finalizing logging from process 824]LOG]!><time="09:20:54.171+000" date="06-10-2008" component="TSBootShell" context="" type="1" thread="844" file="tslogging.cpp:1736">
<![LOG[Finalizing logs to root of first available drive]LOG]!><time="09:20:54.171+000" date="06-10-2008" component="TSBootShell" context="" type="1" thread="844" file="tslogging.cpp:1578">
<![LOG[Successfully finalized logs to C:\SMSTSLog]LOG]!><time="09:20:54.250+000" date="06-10-2008" component="TSBootShell" context="" type="1" thread="844" file="tslogging.cpp:1635">
<![LOG[Cleaning up task sequencing logging configuration.]LOG]!><time="09:20:54.250+000" date="06-10-2008" component="TSBootShell" context="" type="0" thread="844" file="tslogging.cpp:578">
I'm at my wits end with this software, if I can't find a solution to this problem pretty soon, I will tell management here to can the whole idea and stick with the norton ghost setup.

i had this problem today on a virtual lab ive got setup here (windows 2008 server, with sccm 2007sp1 deploying windows server..)
i had to rewrite my task sequence as it was giving me problems - (configuring ADDS) and after going through all the steps I tried yet another pxe boot and it failed, this time with the pxe error Failed to get client identity 80004005 in the SMSTSlog
I checked this log against a know good one from earlier on the same server and indeed the time/date are processed shortly after words, however i pxe booted again and verified time/date on the virtual pc and they were absolutely correct
I tried this and that for 2 hours with no positive result, lastly i rebooted the server and lo and behold the pxe error was gone.
I agree that we need a decent troubleshooting option from Microsoft about this as the documentation appears to be whatever is here or on other forums and in a lot of cases there are no solutions
does changing a task sequence somehow reprogram the PXE setup for WDS/sccm ? I have another server (real) beside me that now wont process PXE boot requests anymore even though it was working fine !
PXE-E51: no DHCP or proxyDHCP offeres were received....
no switch just a crossover network cable between server and client, client was successfully deployed hours before with windows server 2008 via sccm via pxe boot.....
tried all the usual, not much hair left now....
found this site http://susanaguedes.spaces.live.com/Blog/cns!830A1768E1B27E94!350.entry
PXE-E51: No DHCP or proxyDHCP offers were received
The PC cannot contact the DHCP server. Possible causes (see ref [19]):
There is a problem with the DHCP server
The network card or PXE boot portion of the network card is faulty
The network cable is faulty
tested the client PXE boot to another server, worked fine using same network card and cable
the DHCP server on the server reports no problems and has worked fine since I set it up some months ago, indeed if i boot the client into windows server it will get an ip no problem from the dhcp server
so what is wrong here ? how can WDS/ SCCM pxe boot functionality turn itself on or off at will with no user intervention ???
restarted the server 3 times, no difference, restarted WDS many times, no difference, restarted DHCP server service and now I get
PXE-E55: proxyDHCP service did not reply to the request on port 4011
As slightly less common one, with various causes (see ref [19]). Usually the PC has successfully contacted the DHCP server and the PC will even report its DHCP assigned IP address along with the error, but the RIS process could not continue for some reason.
restarted the WDS service and it booted in Windows PE via pxe finally after hours of repetive tasks, only to bring me back to square one with the Windows PE rebooting itself immediatly after loading network support,
ok, back to troubleshooting....

Get Client IP working in IAS 10g

Hello,
I need obtain the request ip of client machine. I am working with JSP on IAS 10g.
using request.getRemoteAddr() function, but it send me the server ip address not the client ip.
someone can help me?
Jo

Hi Jo,
The getRemoteAddr() method returns the IP Address of the System that called the resource. If a request is made to a servlet / JSP, the request is routed to OC4J and the reuqest is analyzed by OC4J - thus, the IP address seen by OC4J belongs to the HTTP Server and not the client/
You can have a look at Metalink Note:189317.1 :- Subject: getremoteaddr Returns Wrong IP Address With mod_oroxy and OC4J. You might find the workaround suggested in this note useful.
Regards,
Sandeep

Failed To install Client - 2012 SCCM - Following is the Logs

Hi Support .... Below is the log which, i am getting. while i am trying deploy or install client on machines ....plz help me out
<![LOG[Sending message body '<ContentLocationRequest SchemaVersion="1.00">
<AssignedSite SiteCode="ADC"/>
<ClientPackage/>
<ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0"
UseInternetDP="0">
<ADSite Name="Default-First-Site-Name"/>
<Forest Name="wesee.org"/>
<Domain Name="wesee.org"/>
<IPAddresses>
<IPAddress SubnetAddress="131.107.2.0" Address="131.107.2.130"/>
<IPAddress SubnetAddress="2002:836B:0282:0000" Address="2002:836B:0282:0000:0000:0000:836B:0282"/>
</IPAddresses>
</ClientLocationInfo>
</ContentLocationRequest>
']LOG]!><time="09:46:42.900-330" date="02-09-2015" component="ccmsetup" context="" type="0" thread="4620" file="siteinfo.cpp:96">
<![LOG[Sending message header '<Msg SchemaVersion="1.1"><ID>{E34B2C49-F83D-4976-B65F-694D9BF0AFCD}</ID><SourceHost>WIN-12-ADC</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:WIN-12-ADC:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>http://WIN-12-ADC.wesee.org</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2015-02-09T04:16:42Z</SentTime><Body
Type="ByteRange" Offset="0" Length="1316"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>']LOG]!><time="09:46:42.900-330" date="02-09-2015"
component="ccmsetup" context="" type="0" thread="4620" file="siteinfo.cpp:177">
<![LOG[CCM_POST 'http://WIN-12-ADC.wesee.org/ccm_system/request']LOG]!><time="09:46:42.951-330" date="02-09-2015" component="ccmsetup" context="" type="1" thread="4620" file="httphelper.cpp:807">
<![LOG[Failed to receive ccm message response. Status code = 404]LOG]!><time="09:46:42.956-330" date="02-09-2015" component="ccmsetup" context="" type="2" thread="4620" file="httphelper.cpp:1694">
<![LOG[GetDPLocations failed with error 0x80004005]LOG]!><time="09:46:42.956-330" date="02-09-2015" component="ccmsetup" context="" type="3" thread="4620" file="siteinfo.cpp:532">
<![LOG[Failed to get DP locations as the expected version from MP 'http://WIN-12-ADC.wesee.org'. Error 0x80004005]LOG]!><time="09:46:42.956-330" date="02-09-2015" component="ccmsetup" context="" type="2"
thread="4620" file="ccmsetup.cpp:11261">
<![LOG[Failed to find DP locations from MP 'http://WIN-12-ADC.wesee.org' with error 0x80004005, status code 404. Check next MP.]LOG]!><time="09:46:42.956-330" date="02-09-2015" component="ccmsetup" context=""
type="2" thread="4620" file="ccmsetup.cpp:11117">
<![LOG[Only one MP http://WIN-12-ADC.wesee.org is specified. Use it.]LOG]!><time="09:46:42.956-330" date="02-09-2015" component="ccmsetup" context="" type="1" thread="4620" file="ccmsetup.cpp:10080">
<![LOG[Have already tried all MPs. Couldn't find DP locations.]LOG]!><time="09:46:42.956-330" date="02-09-2015" component="ccmsetup" context="" type="3" thread="4620" file="ccmsetup.cpp:11146">
<![LOG[GET 'http://WIN-12-ADC.wesee.org/CCM_Client/ccmsetup.cab']LOG]!><time="09:46:43.055-330" date="02-09-2015" component="ccmsetup" context="" type="1" thread="4620" file="httphelper.cpp:807">
<![LOG[Failed to successfully complete WinHttp request. (StatusCode at WinHttpQueryHeaders: 404)]LOG]!><time="09:46:43.058-330" date="02-09-2015" component="ccmsetup" context="" type="3" thread="4620"
file="httphelper.cpp:1013">
<![LOG[DownloadFileByWinHTTP failed with error 0x80004005]LOG]!><time="09:46:43.058-330" date="02-09-2015" component="ccmsetup" context="" type="3" thread="4620" file="httphelper.cpp:1081">
<![LOG[Sending Fallback Status Point message to 'WIN-12-ADC.wesee.org', STATEID='308'.]LOG]!><time="09:46:43.058-330" date="02-09-2015" component="ccmsetup" context="" type="1" thread="4620"
file="ccmsetup.cpp:9756">
<![LOG[Failed to get client version for sending messages to FSP. Error 0x80041010]LOG]!><time="09:46:43.062-330" date="02-09-2015" component="ccmsetup" context="" type="2" thread="4620" file="ccmsetup.cpp:9838">
<![LOG[Params to send FSP message '5.0.7958.1000 Deployment Error 0x80004005. Url http://WIN-12-ADC.wesee.org/CCM_Client/ccmsetup.cab']LOG]!><time="09:46:43.062-330" date="02-09-2015" component="ccmsetup" context=""
type="0" thread="4620" file="ccmsetup.cpp:9887">
<![LOG[State message with TopicType 800 and TopicId {D5B33142-10A3-403C-A2F9-84E7F9F977E5} has been sent to the FSP]LOG]!><time="09:46:43.078-330" date="02-09-2015" component="FSPStateMessage" context="" type="1"
thread="4620" file="fsputillib.cpp:752">
<![LOG[CcmSetup failed with error code 0x80004005]LOG]!><time="09:46:43.109-330" date="02-09-2015" component="ccmsetup" context="" type="1" thread="4620" file="ccmsetup.cpp:10879">

This is *not* support. It is a community based forum to provide best effort help. If you want "support" please contact Microsoft Customer Support Services (CSS) or your service provider.
Based upon the log file above, your Management Point is not healthy. Each and every request to the MP is met with an http error code of 404 which indicates "Not Found". Please review your MP's health.
Jason | http://blog.configmgrftw.com | @jasonsandys

Rich Client Login fails from Infoview but works fine if opened from desktop

Hi Friends,
When i open WebI Rich Client from my infoview (By changing the preferrance settings in Infoview), it returns an error as "Login Fails" , but if i open the webI Rich Client from my Start->Programs->Business Objects XI 3.0->WebI Rich Client , it works fine. i am not sure why invoking rich client from infoview fails, but the same works fine, if opened directly from the desktop. I have only one user "administrator" Created with no password in the Enterprise.
Configuration:
Platform:             Windows Xp
Type:                  Vertical Installation (All the servers and Presentation Layer in a single Box)
Boxi Version:     BOXI 3.0
Authentication:   BO Enterprise.
Any help in the regard is appreciated.
Regards,
Ram kumar G
Edited by: Ramkumar Govindasamy on Aug 11, 2009 9:58 AM

Hi,
Windows XP is not officially supported for a BOBJ server installation. Can you consider installing BO on a Windows Server machine?
Have a look prior to the installation at the Support Platforms document for BO XI 3.0. You can find this here:
[http://service.sap.com/bosap-support]
Regards,
Stratos

Can't get instant client to work on Win XP

This is driving me nuts. I'm trying to get instantclient10_1 (10.1.0.4) to work reliably on Win XP so I can use it in deploying a Python app I'm writing. I have one XP system on which I have the instant client installed and working. By this I mean that it works with the appropriate of sqlplus. It also works with cx_Oracle. However, I do need to set ORACLE_HOME in order to achieve this (contra the documentation). I do not seem to need to set SQLPATH.
But I can't get it to work on any other system. I copy my instantclient10_1 directory over and use the same batch file that works on the "good" system, but I get "invalid or unknown NLS parameter value specified". I'm using a command of the form
sqlplus user_name/[email protected]:1521/db_name
I've also tried a "fresh" install on that machine. Same story. I've tried it on another machine as well. Same story. It only works on this one machine!
It actually took me quite a while to get it to work on that machine, involving installing and uninstalling the full client, the instant client, both, etc. But it does work there.
Another odd "feature": On the "good" machine, if I fail to set ORACLE_HOME, it errors and suggests I do this. On the "bad" machine, I just get the "invalid or unknown NLS" error.
There are other ORACLE directories on these machines (e.g., ORA17). But I get the same results if I hide these and take all reference to them out of environment variables.
Any suggestions will be greatly appreciated. Why is it working on the one system? Why isn't it working on the others?

There's one more way that the previously-existing Oracle directories on the other machines might be tripping you up - with registry settings. In particular, the HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\(some home)NLS_LANG registry key may be associated with the "invalid or unknown NLS parameter value specified" error you're getting.
Of course, the Instant Client isn't supposed to have to mess with the registry, so that makes me suspicious. And I got Instant Client SQL*PLUS on a clean XP machine to work without setting an ORACLE_HOME. All this makes me suspicious that some stuff from outside your Instant Client is being run. I know you said you cleaned your environment variables, but double-check that the other Oracle directories are out of your PATH.
If you have permission to, you might want to thoroughly scrub the old Oracles from the other machines (starting with running the Oracle Installer, then hand-cleaning the registry, the c:\Ora92 or whatever directory, and then c:\Program Files\Oracle). If you have MetaLink, Document 74790.1 is a dated but good guide to cleanly de-installing an old Oracle installation from Windows. It's much more difficult than it ought to be; sometimes it feels like an Oracle home is never truly gone. If you can't do that, perhaps save a copy of your registry and then temporarily rename HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE to ORACLE_HIDDEN, or something - something to keep any existing registry settings from distracting your Instant Client.
Good luck!

How to get the FTP clients to work?

This is something that (to me at least) should be trivial but I just can't
get it to work at all.
How do you get an FTP client to work?
I've tried several GUI clients as well as the terminal FTP command and they
all seem to get stuck entering passive mode - according to the log entries
they send the command.... And then nothing or a timeout, the following is
from the terminal FTP command:
Titania:~ susan$ ftp ftp.apple.com
Trying 17.254.16.11...
Connected to ftp.apple.com.
220 17.254.16.11 FTP server ready
Name (ftp.apple.com:susan): anonymous
331 Anonymous login ok, send your complete email address as your password.
Password:
230 Anonymous access granted, restrictions apply.
Remote system type is UNIX.
Using binary mode to transfer files.
ftp> ls
501 EPSV: Operation not permitted
227 Entering Passive Mode (17,254,16,11,223,157).
200 PORT command successful
421 Service not available, remote server timed out. Connection closed
ftp>
In my System Preferences -> Network panel in the Proxies tab, I have the
"use Passive FTP mode (PASV) checked.
I also have checked the FTP firewall option (but I think that is only if I'm
acting as an FTP server).
I am connected to the internet via a Netgear wireless router.
I also have an old Windows laptop that also uses the same wireless router
and it can FTP quite happily!!!!!
Any suggestions would be gratefully received.
Susan

ejn - thanks for your continued assistance.
I've tried turning the firewall off but this does not appear to make any difference(*). Also, I have Parallels installed and I'm sharing the internet connection with this (even though Parallels itself is not currently running). Turning this sharing off doesn't seem to change anything either.
I have noticed some entries in the ifpw.log file that coincide with some of the ftp actions. Given the following terminal session:
Titania:~ susan$ ftp ftp.apple.com
Trying 17.254.16.10...
Connected to ftp.apple.com.
220 17.254.16.10 FTP server ready
Name (ftp.apple.com:susan): anonymous
331 Anonymous login ok, send your complete email address as your password.
Password:
230 Anonymous access granted, restrictions apply.
Remote system type is UNIX.
Using binary mode to transfer files.
ftp> ls
501 EPSV: Operation not permitted
227 Entering Passive Mode (17,254,16,10,245,46).
200 PORT command successful
421 Service not available, remote server timed out. Connection closed
ftp>
at the time the "200 PORT command successful" is displayed, the ifpw log starts showing:
Sep 5 09:11:21 Titania ipfw: 12190 Deny TCP 17.254.16.10:20 192.168.0.5:49162 in via en1
Sep 5 09:11:24 Titania ipfw: 12190 Deny TCP 17.254.16.10:20 192.168.0.5:49162 in via en1
Sep 5 09:11:27 Titania ipfw: 12190 Deny TCP 17.254.16.10:20 192.168.0.5:49162 in via en1
Sep 5 09:11:30 Titania ipfw: 12190 Deny TCP 17.254.16.10:20 192.168.0.5:49162 in via en1
Sep 5 09:11:33 Titania ipfw: 12190 Deny TCP 17.254.16.10:20 192.168.0.5:49162 in via en1
Sep 5 09:11:36 Titania ipfw: 12190 Deny TCP 17.254.16.10:20 192.168.0.5:49162 in via en1
Sep 5 09:11:42 Titania ipfw: 12190 Deny TCP 17.254.16.10:20 192.168.0.5:49162 in via en1
which makes sense as the system tries to go for an active transfer.
(*) Actually, while I've been writing this, I've been playing on the terminal as well. I've found the combination of:
1) turning off the firewall
2) starting ftp
3) issuing the 'passive' command to turn off passive mode
4) issuing 'ls' etc. works
Looks like I've not been waiting long enough for the ftp client to get sick of trying the passive transfer and switching to an active one with the firewakk turned off!
Still doesn't answer the question - why does passive mode not work?
Susan

Native Cisco VPN Suddenly Not Working - Failed to get sainfo

I've had native cisco VPN setup and running just fine until it stopped working the last few weeks. Authentication etc is fine but it will not connect.
Logs:
10/10/14 12:29:16.599 PM
racoon[17091]
Algorithm mismatched
10/10/14 12:29:16.600 PM
racoon[17091]
failed to get sainfo.
10/10/14 12:29:16.601 PM
configd[19]
IPSec Network Configuration established.
10/10/14 12:29:16.601 PM
configd[19]
IPSec Phase1 established.
10/10/14 12:29:16.602 PM
configd[19]
network changed.
10/10/14 12:29:16.604 PM
vmnet-bridge[3034]
Dynamic store changed
10/10/14 12:29:16.614 PM
configd[19]
network changed: v4) DNS* Proxy SMB
10/10/14 12:29:16.617 PM
vmnet-bridge[3034]
Dynamic store changed
10/10/14 12:29:16.626 PM
racoon[17091]
failed to get sainfo.
10/10/14 12:29:16.000 PM
kernel[0]
vmnet: VMNetSetopt: Set link state DOWN
10/10/14 12:29:16.000 PM
kernel[0]
vmnet: VMNetSetopt: Set link state UP
10/10/14 12:29:16.914 PM
Skype[266]
Failed to create AccessSession
10/10/14 12:29:17.674 PM
racoon[17091]
failed to get sainfo.
10/10/14 12:29:18.748 PM
racoon[17091]
failed to get sainfo.
10/10/14 12:29:19.822 PM
racoon[17091]
failed to get sainfo.
10/10/14 12:29:20.674 PM
racoon[17091]
failed to get sainfo.
10/10/14 12:29:20.896 PM
racoon[17091]
failed to get sainfo.
10/10/14 12:29:20.962 PM
com.apple.launchd.peruser.501[138]
(com.apple.FileStatsAgent) Throttling respawn: Will start in 8 seconds
10/10/14 12:29:21.952 PM
racoon[17091]
failed to get sainfo.
10/10/14 12:29:22.095 PM
LKDCHelper[17103]
Starting (uid=501)
10/10/14 12:29:22.953 PM
racoon[17091]
failed to get sainfo.
10/10/14 12:29:24.021 PM
racoon[17091]
failed to get sainfo.
10/10/14 12:29:25.092 PM
racoon[17091]
failed to get sainfo.
10/10/14 12:29:25.22
10/10/14 12:29:26.163 PM
racoon[17091]
failed to get sainfo.
10/10/14 12:29:27.238 PM
racoon[17091]
failed to get sainfo.
10/10/14 12:29:29.330 PM
racoon[17091]
failed to get sainfo.
10/10/14 12:29:29.400 PM
racoon[17091]
failed to get sainfo.
10/10/14 12:29:30.384 PM
com.apple.SecurityServer[15]
Session 100111 created
10/10/14 12:29:30.399 PM
racoon[17091]
failed to get sainfo.
10/10/14 12:29:31.420 PM
racoon[17091]
failed to get sainfo.
10/10/14 12:29:32.034 PM
com.apple.IconServicesAgent[203]
main Failed to composit image for binding VariantBinding [0x227] flags: 0x8 binding: FileInfoBinding [0x125] - extension: TIF, UTI: public.tiff, fileType: ????.
10/10/14 12:29:32.492 PM
racoon[17091]
failed to get sainfo.
Oct 10 13:15:41 Michael-Botkins-MacBook-Pro.local racoon[480]: glob found no matches for path "/var/run/racoon/*.conf"
Oct 10 13:15:41 Michael-Botkins-MacBook-Pro.local configd[18]: network changed.

It looks like VMware is interfering with it. Either uninstall that, or see below.
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

I purchased and downloaded Photoshop Elements 13, but the installer fails to initialise. How do I get it to work?

I have Photoshop Elements 10 and Premier Elements 10 installed on my PC. Both were installed from discs that I bought a few years ago. I recently purchased the upgrade (by download) for both applications to version 13. In accordance with the (scant) instructions received by email, I downloaded the four files required from the Adobe site. I subsequently ran the .exe files, which in turn created directories on my PC, including set-up.exe files for both applications. When I run the setup files, I get an error message stating that the installer failed to initialise. The error message advised me to download the Adobe Support Advisor to detect the problem. That tool does not exist. I then sought assistance from the Abobe support site, initially using the hyperlink suggestions, which were of no use, then using the chat function. The operator kept trying to get me to do something with something called 'Creative Cloud'; which I am not familiar with, and do not use. He then instructed me to download and run a CS5 cleaner tool; however, none of the choices offered by that tool include my issue, or either Photoshop Elements or Premier Elements. I am reluctant to uninstall version 10 of the programs in case I end up losing the lot and therefore wasting even more money than the purchase price for this upgrade.
All I want to do is upgrade my two applications from version 10 to version 13. I have paid the requisite fee but it clearly does not work. I appear to have totally wasted my money. Can anyone please tell me how to get it to work? I do not want to have anything to do with the so-called ‘Creative Cloud’ as I have no idea what it is, and I do not want to lose what I already have (and have paid for previously).
I have tried for a few days to access the so-called 24/7 chat assistance but appeared to have been locked out as every time I try to access it, I get a message that the (24/7) chat is closed. Adobe has taken my money for a product that does not work, and also refuse to help me fix it.
I am very frustrated with a product I bought that does not work, and a 24/7 support service that clearly is not 24/7, and which refuses to assist me. Can anyone PLEASE tell me how to get this to work? Rod.

Hi,
Can you please share the logs?
You can use the Adobe Log Collector tool (Log Collector Tool) and share the corresponding zip file @ [email protected]
Thanks,
Shikha

I have a mac book pro. Yesterday the mail app failed to open. I have tried to open it fomr the dock and the application folder but nothing happens. Does anyone have any suggestions to get it to work?

I have a mac book pro. Yesterday the mail app failed to open. I have tried to open it from the dock and the application folder but nothing happens. Does anyone have any suggestions to get it to work?

You don't need iDVD unless you are going to make DVDs. If you are just trying to share files, iDVD won't help you at all.
What you want to do is in iMovie, choose File/Share/File, and export that way. It creates an .mp4 file that should be readable on Macs or Windows.
You could also File/Share/YouTube if you don't mind posting them to YouTube, because of course YouTube videos are watchable by any Mac or Windows computer made in the last 10 years.

When ever i go to login to the app store on my computer it always say "an unknown error has occurred" how do i get it to work?

when ever i go to login to the app store on my computer it always say "an unknown error has occurred" i want to know if its just my computer or if its the app store or what? And how do i get it to work?

Changing the email address you use for your Apple ID -
http://support.apple.com/kb/HT5621

Client login to OS/X server doesn't work after upgrade to 10.9.3

I have been running a Mountian Lion Server with open directory to handle several Mac's at home. After upgrading from 10.8.x to 10.9.3 a few days ago login from the client computer with 10.9.3 does't work. If I turn off Wi-fi, login works, and I can access everything after re-enabling wi-fi.
Works with client computer and 10.9.2. It also works with login to wiki on this server, using safari from my computer.
/Casi

I have several network user set up on a server computer. This computer, macMini, is running 10.9.3 and the latent version of OS/X server.
When logging in on a MacBook PRO with 10.9.3, and the computer is on the same network as the server, wi-fi or Ethernet cable, i'm not granted access to the network accounts. The screem-shot above is from the server log.
When not connected to the local network does login work.
Same issue with two network accounts. But, when trying a MacBook Air with 10.9.2 is it working with both these networks accounts.
If disable wi-fi, login and then enable wi-fi can I access all resources on the server as shared disks and replicate home directories. Same procedure works with the 10base6 Ethernet cable, i.e. Pull out the contact, login, put in in the contact.

Can't get Adobe login to work in Muse forum

I have Muse questions and I'm really hoping I don't have to create yet another online account. (Whatever happened to that thumbprint login technology that was supposedly being developed by somebody years ago?!!)
Do Adobe accounts not work on the Muse forum?
Thanks.

Thanks for your response. I'm still hoping to make my current login work because I don't want to have to read through the Terms of Service of Get Satisfaction, and you never know what people are trying to sneak in these days. I'm using a Mac with Safari. What window are you logging in under? When I'm signed in to this forum, I open another window to get to the Muse forum and it asks me to login again. When I click on login, I get a window offering to let me sign in with Google, Facebook, Twitter, Windows Live or an Open ID URL, or create a Get Satisfaction account. Is there another place to login with Adobe IDs? Thank you!

Connected Touchpad to Work Computer now I get "Network Login Message" No internet Connection

I tried charging my Touchpad on my work computer the USB icon showed up on TP. After charging, I could no longer access the internet. I'm constantly getting Network Login required, No internet connection.
I have no problems using at home or at various hot spots, but at work, no matter what I do I get the same message. I've tried to power off/on router.. didn't work. Rebooting my TP.. didn't work. Changing Chanels on Router.. didn't work. I don't know if a factory reset is needed or the doctor fix is needed. I read just about every post on this form, but I 'm a novice and am having difficulty turning the tech talk into layman's terms.
Additionaly, I would like to know how to make my TP more useful with regard to using on the Android market, but I don't want to brick the unit. I purchased in 2011 to use at work and can't use it due to the problems listed.

I'm not sure what the fix is for the network issue at work. Does the TP even recognize the network at your office? You could try a full erase reset as a less-drastic step than doctoring.
As for Android on your TP, it is not officially supported here, but I can tell you that it's the bomb. I have CM9 on one TP, and CM10 on another. They both work great, very stable. Suggest you check out CM9 here, and and CM10 here. Beyond that, it's pretty much self-help on installation. Of course, it is also at your own risk.
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Can't get AIM login to work, AOL login works fine, AIM login does not

I know this has been posted before but I cannot get this to work.
My daughters AIM login is her AOL screen name.
She can log in to AOL with her password with no problem,
SHe can log in to AIM.com with her password with no problem
But the ICHAT program cannot seem to log her in at all.
the box comes up saying that either the password or screen name is incorrect.
We tried the change to port 443 with no luck.
As a test of the system, My own AOL screen name logs in to ichat fine.
Any suggestions?

My Apologies http://discussions.apple.com/thread.jspa?threadID=121885&tstart=50
2:21 PM Saturday; November 17, 2007

X2go fails to get Client Login working!

Similar Messages

Maybe you are looking for