X48C Freezing in OS boot & install
See System specs in profile.
Given all that i have tried installing vista business and xp pro sp1a 32-bit os' several times to no avail (except once when xp installed but continually failed to boot after os selection screen)
I tried installing vista with only 2GB in (with and without dddr2/3 selector) per recommendation and that made no difference as vista would freeze almost every time after the progress bar finished (once the windows setup files were loaded and the mouse popped up). Same result with both 1 or 2 sticks installed. A few times i made it to the cd key screen however (2 sticks in).
Vista's memtest ran for 3 passes with no problems detected in the memory and Checkdisk reported no problems on the disks.
Overclocking and underclocking the ram and processor proved fruitless as well, though i am not good at this so i am not sure if i executed the trials correctly; raising the voltages yielded no difference.
Raid array is intact and seems to be functioning perfectly.
DDR3 timings are suggested by patriot to be 9-9-9-24 at 1.5v and with those entered it fails to post. I do not know the correct values for the other 5 settings as i cannot find any literature on them (tTRD, TWR, etc). It posts fine with auto settings and 1.5v selected for DDR voltage, but no change in freezing habits.
Anyone got any suggestions on how to resolve these freezes and/or how to get one of these two OS's to install? (or any clarifications on things i may have forgot to report!)
Thanks for the help!!
great advice!
I relaxed the timings i did not have the knowlege for, and set the main timings to 9-9-9-24 while upping the voltage to 1.6v and raising the NB by 0.15v. Eventually it posted and everythings been running well since.
This seems to work and so far xp pro sp1a has installed and is running fine.
i didnt do a full memtest run as it seemed to be running fine. Might do that later.
Onto vista next, but as i have one OS installed, the next should be much easier.
Thanks for all the help!
Similar Messages
-
Intermittent freezes upon cold boot
Greetings gurus,
I've been experiencing intermittent freezes on cold boot since a few weeks. I did not have them on 10.5.4. I've only had 4 freezes and according to the CrashReporter log all are identical, as far as I can tell. I have not installed any new hardware and I have only one external thing connected and that's a Sennheiser USB headset. I'm unable to tell if all leave identical messages in other logs however.
The *CrashReporter log* for the four occasions says that the process which broke is *coreservicesd [43]*. On each occasion, it is said that "Thread 0" crashed. This is how the beginning of that log reads (from the crash earlier today):
*Process: coreservicesd [43]*
*Path: /System/Library/CoreServices/coreservicesd*
*Identifier: coreservicesd*
*Version: ??? (???)*
*Code Type: X86 (Native)*
*Parent Process: launchd [1]*
*Date/Time: 2009-01-19 20:33:26.618 +0100*
*OS Version: Mac OS X 10.5.5 (9F33)*
*Report Version: 6*
*Exception Type: EXCBADACCESS (SIGBUS)*
*Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000000*
*Crashed Thread: 0*
The symptoms are:
+ *Menu bar* is invisible (can make out language flag, airport and bluetooth icons and bottom of menu bar).
+ Finder is unresponsive (can't open folders on the desktop and their icons are gone but not their names - relaunching the Finder does not help).
+ Applications won't launch from the Dock.
+ I can access the Restart, Sleep, Shutdown dialog box by pressing the off button on my ACD, but the Shutdown button doesn't work.
+ Holding the power button will not always force shutdown, but seems to put the computer in some sort of sleep mode (when pressing the button again the desktop will appear "greyed" out and a white progress bar will display).
As it doesn't happen upon every cold boot I haven't been able to use the Verbose mode. I have done the following:
+ Trashed the plists of Finder and Dock
+ Fixed permissions in DU
+ Left it unplugged from the mains for a whole day
+ Reset PRAM/NVRAM
+ Using Onyx, deleted the caches under Cleaning - System and Cleaning - User (radical perhaps?)
+ Turned off all login items (AppTrap, Gmail Notifr, Fuzzy Clock, Skype)
+ Run Apple Hardware Test, normal and extended, with no errors found
+ Verified boot disk in DU while booted from the installation disk: no errors
I tried a Safe Boot but it froze. However, it does not freeze every time.
When it froze this evening, I found loads of the following message in Console-All Messages:
*WindowServer[51] LaunchServices/5123589: coreservicesd is running an unsupported version, 0 ( we are 10500000 ), so we cannot talk to it.*
Many of them are prefaced by loginwindow[23] instead of WindowsServer.
Below are the messages in Console-Console messages from the latest time that it froze (all of the messages). There's some talk about com.apple.UserEventAgent-Aqua which I don't understand.
When it says that a "thread" crashes, could it be hardware-related (i.e. the processors)? But should not AHT have caught that? Or is it some corruption in the system? I have backups and clones so I'm not worried about losing data. I'm more concerned about the hardware.
Any thoughts and ideas would be helpful.
/p
19-01-2009 8:33:10 PM com.apple.launchctl.System[2] launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
19-01-2009 8:33:10 PM com.apple.launchd[1] (org.cups.cupsd) Unknown key: SHAuthorizationRight
19-01-2009 8:33:10 PM com.apple.launchd[1] (org.ntp.ntpd) Unknown key: SHAuthorizationRight
19-01-2009 8:33:26 PM com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[100]) Exited: Terminated
19-01-2009 8:33:27 PM com.apple.launchd[1] (com.apple.coreservicesd[43]) Exited abnormally: Bus error
19-01-2009 8:33:28 PM SystemUIServer[120] Normally SSMenuExtra would not have been loaded as a Menu Extra.
19-01-2009 8:33:31 PM [0x0-0x2002].com.apple.iCal.helper[129] _RegisterApplication(), FAILED TO REGISTER PROCESS WITH CPS/CoreGraphics in WindowServer, err=-50
19-01-2009 8:33:33 PM com.apple.UserEventAgent-Aqua[114] <CFArray 0x134a30 [
19-01-2009 8:33:33 PM com.apple.UserEventAgent-Aqua[114] 0xa06981a0]>{type = mutable-small, count = 3, val
19-01-2009 8:33:33 PM com.apple.UserEventAgent-Aqua[114] ues = (
19-01-2009 8:33:33 PM com.apple.UserEventAgent-Aqua[114] 0 : <CFString 0x1349a0 [0xa069
19-01-2009 8:33:33 PM com.apple.UserEventAgent-Aqua[114] 81a0]>{contents = "/System/Library/CoreServ
19-01-2009 8:33:33 PM com.apple.UserEventAgent-Aqua[114] ices/Menu Extras/TextInput.menu"}
19-01-2009 8:33:33 PM com.apple.UserEventAgent-Aqua[114] 1 : <CF
19-01-2009 8:33:33 PM com.apple.UserEventAgent-Aqua[114] String 0x1349f0 [0xa06981a0]>{contents = "/
19-01-2009 8:33:33 PM com.apple.UserEventAgent-Aqua[114] System/Library/CoreServices/Menu Extra
19-01-2009 8:33:33 PM com.apple.UserEventAgent-Aqua[114] s/Volume.menu"}
19-01-2009 8:33:33 PM com.apple.UserEventAgent-Aqua[114] 2 : <CFString 0x138910
19-01-2009 8:33:33 PM com.apple.UserEventAgent-Aqua[114] [0xa06981a0]>{contents = "/System/Library/Cor
19-01-2009 8:33:33 PM com.apple.UserEventAgent-Aqua[114] eServices/Menu Extras/Clock.menu"}
19-01-2009 8:33:33 PM com.apple.UserEventAgent-Aqua[114] )}
19-01-2009 8:33:37 PM org.ntp.ntpd[14] Error : nodename nor servname provided, or not knownActually, doing the following would probably fix everything; at least it has fixed every issue I have ever had.
If Disk Utility can't fix it, you'll need a more robust utility for the repair. I would recommend DiskWarrior. It is the best at directory repairs. It rebuilds then actually replaces your old directory. I feel every Mac owner should have a copy. Make sure you get the disk so you can boot up on it to run repairs. You can also install it on another drive and run it from there to repair this one. DW works faster that way.
I use DW once a month to try and catch errors in my system from getting too far out of hand.
If you have a good backup, hopefully a clone of your system before you had issues, an Erase and Install may also rid you of this issue. But, beware! You will lose everything on the drive with this procedure. Let us know if you need help with that!
Luck! DALE
p.s. by Thomas Bryant '''' from a previous post.
Diskwarrior is a "must have" utility and it's corrected any weird problem I've ever encountered. Anytime I have to do a forced shutdown etc. I run DW to get the directories back in tip top shape. Directory problems cause strange issues and often over the course of several weeks or months the little problems add up to finally a major problem. Tom -
Bootcamp 'Glowing' windows logo freeze after gfx driver install
Bootcamp 'Glowing' windows logo freeze after gfx driver install
Last week suddenly, after having changed or installed nothing, trying to boot into windows resulted in a frozen glowy window logo 'Starting Windows', which resulted in having to format the windows partition.
Since then I've found out that I can do everything except install gfx drivers.
I've installed firefox, all bootcamp drivers except gfx, swtor (doesn't run of course, but installs fine), quicktime, rebooting is fine after all this...
But as soon as I install any kind of graphics driver and reboot, it freezes at the glowy window logo.
I have tried;
The bootcamp included gfx driver
Windows Update included gfx driver
Official nVidia latest beta driver
Official nVidia latest whql driver
Official nVidia oldest whql driver
nVidia Cuda driver, both versions
All give the same result
I have formatted the entire harddrive and written zeros and made the windows partition in a physically different location to make sure it's not a harddrive issue, no luck.
I have tried both Windows 7 x86 and x64 with matching drivers, same results.
Tried booting with no devices attached, no luck.
This all seems to me like a bust gfx card, were it not that under Lion everything works fine, even gaming (WoW).
Techtool Pro's test machine shows no errors.
My machine is a;
iMac
24-inch, Early 2008
Processor 3,06 GHz Intel Core 2 Duo
Geheugen 4 GB 800 MHz DDR2 SDRAM
Videokaart NVIDIA GeForce 8800 GS 512 MB
Software Mac OS X Lion 10.7.3 (11D50b)
Hardwareoverzicht:
Modelnaam: iMac
Modelaanduiding: iMac8,1
Processornaam: Intel Core 2 Duo
Processorsnelheid: 3,06 GHz
Aantal processors: 1
Totale aantal cores: 2
L2-cache: 6 MB
Geheugen: 4 GB
Bussnelheid: 1,07 GHz
Opstart-ROM-versie: IM81.00C1.B00
SMC-versie (systeem): 1.30f1I am running Lion on a Mac Mini Server wherein I placed a Bootcamp partition and installed Windows 7 Ultimate. I've been testing Windows Media Center using a CableCard Tuner installed in a SiliconDust HomeRun box.
All was well until I received a Windows notification of an NVIDIA driver update. After the update, I now freeze at the same point that you do in the Windows startup splash screen.
I rolled back the driver using the Windows control panel associated with the device. Still freezes.
Windows repair does not have a fix. I can't get windows to start in "safe mode" so I can remove the additional apps that NVIDIA installed during the update.
I'm certain the freeze is associated with the NVIDIA driver. -
I own a MacBook Pro 2.4 ghz non unibody. I turn on my laptop for ten seconds and it freezes. It boots perfectly and runs for ten seconds until everything freezes. Please help!
See if you can boot into single user mode with Command S.
-
Thought I had it fixed, by iMac is still freezing sometimes on boot up
In an earlier post, I thought we had my iMac fixed but now it's still freezing up on boot up, occasionally.
Sometimes I'll just get a grey screen with no logo after the boot up chime, sometimes it'll take a good minute or two for my iMac to fully boot up, and sometimes it'll boot just fine.
Usually, when I get just the grey screen I have to use the Command-Control-Power button to reset the Mac just to boot.
Any ideas as to why? I've repaired the hard disk after the first time this happened and it found no errors.
I read my console log and there's nothing glaring out that looks like a massive error.
I have been getting the following errors, could they be the problem?
BootCacheControl: could not stop cache/fetch history: Cannot allocate memory
vmnet: Hub 1 does not exist, allocating memory.
Any help would be greatly appreciated.As a follow up to this.
I booted from CD and ran disk utility. I repaired the disk and said everything was A-ok. I tried to repair disk permissions and it the progress bar froze a 1/3rd of the way in saying "1 minute remaining" and never moved after that.
ideas? -
Dreamweaver keep freezing - I have problem installing the update for Dreamweaver cs5 -
Dreamweaver keep freezing - I have problem installing the update for Dreamweaver cs5
That is the perfect system for Dreamweaver.
The only thing that I can think of is to reinstall Dreamweaver. See Uninstall Creative Suite | CS5, CS5.5 -
Can't boot install disk from usb drive
I bought a macbook pro back in late 2007 and up until now im getting ready to sell it. So now while restoring to factory settings, i wiped off the hard drive and i need to reinstall my install discs which i still have. However, the cd drive doenst work on the laptop. It hasnt worked since i can remember. I already imaged the instal disk into a usb flash drive and tried booting from there. When i turn it on and hold "option," it reads the flash drive as a backup, but it wont boot from it. I click the flash drive, and it loads, but then the apple logo gets replaced by a "no symbol."
I have a new macbook pro, but not a firewire cable or an external cd/dvd drive. Anyone know how i can get the old laptop to boot from the usb?
BTW, the install cd's are for tiger, but i installed snow leopard when it came out. Im not sure if i still have the cd for snow leopard, but i dont think that would help since the cd drive doenst work. Do i need to buy an external cd drive to reinstall my operating system?chonke wrote:
the install cd's are for tiger, but i installed snow leopard when it came out. Im not sure if i still have the cd for snow leopard
Well that's your problem you used Tiger and the firmware was changed to prevent booting from the older operating system once you upgraded to Snow Leopard.
You will need a copy of the Snow Leopard disks, the white one's online at Apple will work
Then you need to follow this to make a 10.6 install USB
http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
Here are the instructions to install Snow Leopard, I advise zero erasing the entire drive first, this will clear any bad sectors and make the install work perfectly when you sell it and not get call back (although the cd drive is dead of course)
You might be able to extract the free iLife off the Tiger disks, then Software Update fully to bring it up to date using Pacifist from CharlesSoft.
How to erase and install Snow Leopard 10.6
BTW, you can't boot/install off a external optical, only internal. -
I would like to do a full restore from time machine but have lost my boot/install disk.
Hi,
Recently had my HDD replaced (with fresh OS installed) and even though I have everything backed up on time machine am struggling to complete a full restore.
After reading time machine help understand I need to mac os install/boot disk to get to the time machine full restore utlility.
I cannot find my install disk. Can I create one from my current mac?
Any suggestions? Thanks!The install disk cannot be created. If you call Apple (1-800-MYAPPLE) they should be able to order you a new set of disks specifically for your computer.
I found this old answer talking about what the disks are:
If you bought your computer new, you may be able to contact Apple about buying a replacement boot/install disc#1 for your specific computer. If a disc is lost or damaged, they have been known to be able to help. Not sure if a call to Sales Support would be the direction to take on this; but it would make more sense to ask them about the replacement.
The disc #1 and #2 that come with the machine will (or more, if it has a CD packet and the OS is not on a DVD) restore the computer to how it was new. If you upgrade to an all new OSX version and wanted to add the original applications (instead of buying new ones; not always a good idea if the leap was a great one from original OS to the last version) you could use the disc #2 to add applications to a system. It has installers, & won't boot. -
1TB Canvio freezing computer during boot up
I have a new Canvio 1TB Ext HD HDTC710XK3A1. My desktop computer will freeze up during boot up if the Canvio is plugged into USB port. Unplugged the computer will boot up OK. I have also tried this on my laptop and the problem also occurs. If I plug in the Canvio after computers are up and running the computers work OK untill the next boot up so I have to disconnect after I shut down the computer. Any fix for this problem so I can leave the Canvio plugged in all of the time?
Reset PRAM.
http://support.apple.com/kb/PH4405 -
I know this is an old question, but I want to make an OS-X Lion boot/install DVD.
I have the Recovery disk assistant, but this program does not 'see' my DVD.
Is the best option to download from the appstore again?The Lion Recovery Assistant just creates a Recovery HD on an external drive such as a USB external drive or thumb drive. I don't believe it will create a DVD.
So, to get the installer file you would need to re-download it from the App Store and capture it after the download and before you continue with the install. Here's a link with instructions in case you don't them. -
Windows 7 Freezes at Restart After Installing Boot Camp Drivers
Hi,
I have a MacBook Pro and am having troubles installing 32-Bit Windows 7. All seems to be functional until I install the Boot Camp drivers included on the Install Disk. I have tried using the Boot Camp 3.1 update, but the same problem occurs. After the computer freezes on the install page, I can no longer access Windows (even in Safe Mode) and am forced to restart the entire process (that is, repartition the hard drive and reinstall Windows).
If I don't install the Boot Camp drivers, Windows seems to be functional, so I'm pretty sure it's something in the Boot Camp package causing the trouble.
Is anyone else having this problem? Any ideas or workarounds?I finally got it to work. You need to go to the NVidia website and install their drivers. I think the Apple supplied ones are out of date and are causing Windows to hang. Install Boot Camp from the supplied DVD, install the update that Apple supplies through the newly installed Boot Camp, and then go to the NVidia website to manually download the drivers. I used the GeForce 300M series installer. Make sure you do all of this before letting Windows restart.
I had a few issues with it hanging a few times, but once I was able to get into Windows it seems to be working. All of the other Apple supplied drivers seem to work. -
Yosemite cannot boot (Freezes) even with Clean Install
Macbook Pro 15" was normal in the normal, but I updated Samsung Kies and it told me the restart, after that I cannot boot up Yosemite 10.10.2 at all
What I've done:
1. I can access Target Mode with my iMac, copied my files with no problem. I used my imac to verify both MBP HDD and Bootcamp and even try repairing, it showed that there was no fault at MBP in the first place.
2. I can enter Safe Mode, I tried updating the OSX to 10.10.3 and still does not work
3. Bootcamp windows got bluescreen, removed it still doesn't help.
4. I tried install a Clean Install, and still doesn't work, (Installed through SD Card)
5. It seems now I can only do ie., continue my update, continue my new install through safe mode ONLY
I never turned on Filevault in the first place.
At this point I'm not so sure, if I can still access through Target Mode, hopefully it should mean that my hard disk isn't broken.
I am out of ideas... please help
Ps. at normal Start up from the progress bar sometimes the screen stutters and showed me a pixelated screen and then switched back to the progress bar after a minute the loading circle appears and the looping appeared overlapped and thickensStartup Issues - Resolve
Startup Issues - Resolve (2)
Startup Issues - Resolve (3) -
I have a mainboard X48C freeze problem
Hi I'm new to the forum, sorry to jump on the band wagon but I have the same problem which has only just started, since I bought a Q9550 (previously had a E660) and instead of starting a new post (can if you want) thought I would ask for some help here.
I have the following system:
Windows 7 x64 Enterprise
Q9550 CPU
1x ATI HD4870 1Gb GPU
MSI X48c mobo (2x 120 case fans)
2x (4Gb total) Corsair CM3X2G1333C9 DDR3 RAM
Noctua CPU heatsink
2x WD2500KS SATA HDD (RAID 0)
1x 1Tb SATA WD Green
1x SATA CD/DVD burner
OCZ 600w (OCZGSX600) PSU
Tsunami Dream case (2x 120mm fans)
USB ports in roof of case (standard fitting)
With the E6600 all was good in the land. Slightly OC from 2.4GHz to 2.8Ghz but nothing to set the world on fire. System was very stable. Introduce the Q9550, cleared all CMOS Windows is ok(ish) but when gaming I have random PC freezes, black screen for a few secs then it comes back to life. Occationally the PC will reboot it's self too. All drivers are up to date, latest BIOS, just reinstalled Windows 7 x64 and the problem is still occurring (in fact I had a 7e error whilst installing Windows...) Graphics card has been tested on a friends rig and no problems there.
Even setting the CPU and RAM volts manually hasn't resolved the problem. In fact it appears the RAM needs more volts than it is guaranteed to run at; they state 1.5 but this BSOD during windows install, 1.63 and I was able to reinstall Windows fine but after a few mins of gaming the PC froze again. I havent waited for a full blown auto-reboot again. I have set the CPU to 1.3v. Memtests have not produced any errors. I monitor with RealTemps and nothing is getting too hot.
Furthermore I seem to now often get the problem of the PC not booting at all. Power on, fans start and continuously spin fast, I know when it will boot as the GPU fan slows down. PSU underpowered maybe..? I dunno
I am interested in the fact that advice was given to remove the Switch Cards... I was under the impression they had to be installed? What benefit will this bring? I have also thought my PSU might not be up to the job but I have had conflicting responses there.
After having a scan around the forum here it appears I may need to lower my RAM settings?
Taken from datasheet:
Tested and packaged in pairs
Packaged together immediately following system
test
SPD settings of: 7-7-7-20 at 1066MHz
Guaranteed at:
Timings of 9-9-9-24 values at 1333MHz
Would you advise to lower to 1066? Will try when I get home (was so hoping to get the most out of them!)
Regards,
SpankyThanks for the reply and peeling my post off Mike, sorry I didn't start my own initially.
Well @ 1333Mhz I was using the rated timings 9-9-9-24 (as per Corsair) but it wasn't very stable as I said.
I have since changed the FSB/RAM ratio to get 1066Mhz and it seemed much happier. (@1.5v) It would be nice to run the RAM at it's rated setting but my OC skills aren't that extensive. I imagine it would need alot of tweeking? Or could I have just relaxed the timings a bit?
Would removing the Switch Cards make any difference?
Thanks in advance. -
Unable to start Xorg server. Nouveau freezes screen on boot.
I have spent many hours searching the forums, reading the wiki, and googling. I am dual-booting on an early 2008 Macbook Pro. No optimus graphics card, just a Nvidia GeForce 8600M GT. It seems that no devices are being detected and KMS is not enabled (which I thought was enabled by default). One more notable thing is xrandr gives me:
Can't open display
Here is my Xorg.0.log
[ 6475.714]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 6475.723] X Protocol Version 11, Revision 0
[ 6475.726] Build Operating System: Linux 3.18.6-1-ARCH x86_64
[ 6475.729] Current Operating System: Linux archer 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015 x86_64
[ 6475.729] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=2bbc3174-304c-411f-b098-d048b78bfba0 rw rootflags=data=writeback
[ 6475.735] Build Date: 21 February 2015 01:31:01PM
[ 6475.738]
[ 6475.741] Current version of pixman: 0.32.6
[ 6475.747] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 6475.747] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 6475.757] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb 21 16:05:21 2015
[ 6475.760] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 6475.760] (==) No Layout section. Using the first Screen section.
[ 6475.760] (==) No screen section available. Using defaults.
[ 6475.760] (**) |-->Screen "Default Screen Section" (0)
[ 6475.760] (**) | |-->Monitor "<default monitor>"
[ 6475.760] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 6475.760] (**) | |-->Device "Nvidia card"
[ 6475.760] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 6475.760] (==) Automatically adding devices
[ 6475.760] (==) Automatically enabling devices
[ 6475.760] (==) Automatically adding GPU devices
[ 6475.761] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF/".
[ 6475.761] Entry deleted from font path.
[ 6475.761] (Run 'mkfontdir' on "/usr/share/fonts/TTF/").
[ 6475.761] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[ 6475.761] Entry deleted from font path.
[ 6475.761] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[ 6475.761] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 6475.761] Entry deleted from font path.
[ 6475.761] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 6475.761] Entry deleted from font path.
[ 6475.761] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 6475.761] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 6475.761] Entry deleted from font path.
[ 6475.761] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 6475.761] (==) FontPath set to:
/usr/share/fonts/misc/
[ 6475.761] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 6475.761] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 6475.761] (II) Loader magic: 0x814d40
[ 6475.761] (II) Module ABI versions:
[ 6475.761] X.Org ANSI C Emulation: 0.4
[ 6475.761] X.Org Video Driver: 19.0
[ 6475.761] X.Org XInput driver : 21.0
[ 6475.761] X.Org Server Extension : 9.0
[ 6475.762] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 6475.762] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 6475.763] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 6475.765] (--) PCI:*(0:1:0:0) 10de:0407:106b:00a3 rev 161, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00007000/128, BIOS @ 0x????????/131072
[ 6475.765] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 6475.765] (II) LoadModule: "glx"
[ 6475.766] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 6475.783] (II) Module glx: vendor="NVIDIA Corporation"
[ 6475.783] compiled for 4.0.2, module version = 1.0.0
[ 6475.783] Module class: X.Org Server Extension
[ 6475.783] (II) NVIDIA GLX Module 340.76 Thu Jan 22 11:24:42 PST 2015
[ 6475.783] (II) LoadModule: "nouveau"
[ 6475.783] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 6475.783] (II) Module nouveau: vendor="X.Org Foundation"
[ 6475.783] compiled for 1.17.0, module version = 1.0.11
[ 6475.783] Module class: X.Org Video Driver
[ 6475.783] ABI class: X.Org Video Driver, version 19.0
[ 6475.783] (II) NOUVEAU driver
[ 6475.783] (II) NOUVEAU driver for NVIDIA chipset families :
[ 6475.783] RIVA TNT (NV04)
[ 6475.783] RIVA TNT2 (NV05)
[ 6475.783] GeForce 256 (NV10)
[ 6475.783] GeForce 2 (NV11, NV15)
[ 6475.783] GeForce 4MX (NV17, NV18)
[ 6475.783] GeForce 3 (NV20)
[ 6475.783] GeForce 4Ti (NV25, NV28)
[ 6475.784] GeForce FX (NV3x)
[ 6475.784] GeForce 6 (NV4x)
[ 6475.784] GeForce 7 (G7x)
[ 6475.784] GeForce 8 (G8x)
[ 6475.784] GeForce GTX 200 (NVA0)
[ 6475.784] GeForce GTX 400 (NVC0)
[ 6475.784] (++) using VT number 1
[ 6475.784] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 6475.784] (EE) [drm] KMS not enabled
[ 6475.784] (EE) [drm] KMS not enabled
[ 6475.784] (EE) [drm] KMS not enabled
[ 6475.784] (EE) No devices detected.
[ 6475.784] (EE)
Fatal server error:
[ 6475.784] (EE) no screens found(EE)
[ 6475.784] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 6475.784] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 6475.784] (EE)
I added "nouveau" to the modules in mkinitcpio (and ran mkinitcpio -p linux). This has got me to where I am now.
I also noticed my dmesg has the line:
Cannot add dependency job for unit display-manager.service
I would be happy to post the rest of the dmesg if needed.
I went through the nouveau wiki but did not have any success.
I found this post which is similar. I must be missing what they did.
https://bbs.archlinux.org/viewtopic.php?id=173247
Last edited by msmahon (2015-02-25 14:17:04)Awebb, I will be happy to do this and post results.
I am dual booting on a MacBookPro4,1 with GRUB.
I am not sure what you mean by efi method but based on tutorial I followed (more of a guideline really) I am booting directly from my Macbooks EFI bootloader.
I uninstalled mesa, nvidia, and nouveau drivers and installed the proprietary driver nvidia-340xx which is designated to be used with my graphics card (GeForce 8600M GT).
Here is my grub config:
GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="Arch"
GRUB_CMDLINE_LINUX_DEFAULT="rootflags=data=writeback"
GRUB_CMDLINE_LINUX=""
# Preload both GPT and MBR modules so that they are not missed
GRUB_PRELOAD_MODULES="part_gpt part_msdos"
# Uncomment to enable Hidden Menu, and optionally hide the timeout count
#GRUB_HIDDEN_TIMEOUT=5
#GRUB_HIDDEN_TIMEOUT_QUIET=true
# Uncomment to use basic console
GRUB_TERMINAL_INPUT=console
# Uncomment to disable graphical terminal
#GRUB_TERMINAL_OUTPUT=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
GRUB_GFXMODE=auto
# Uncomment to allow the kernel use the same resolution used by grub
GRUB_GFXPAYLOAD_LINUX=keep
# Uncomment if you want GRUB to pass to the Linux kernel the old parameter
# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
GRUB_DISABLE_RECOVERY=true
# Uncomment and set to the desired menu colors. Used by normal and wallpaper
# modes only. Entries specified as foreground/background.
GRUB_COLOR_NORMAL="light-blue/black"
GRUB_COLOR_HIGHLIGHT="light-cyan/blue"
# Uncomment one of them for the gfx desired, a image background or a gfxtheme
#GRUB_BACKGROUND="/path/to/wallpaper"
#GRUB_THEME="/path/to/gfxtheme"
# Uncomment to get a beep at GRUB start
#GRUB_INIT_TUNE="480 440 1"
#GRUB_SAVEDEFAULT="true"
Here is my Xorg.0.log:
[ 82.358]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 82.358] X Protocol Version 11, Revision 0
[ 82.358] Build Operating System: Linux 3.18.6-1-ARCH x86_64
[ 82.358] Current Operating System: Linux archer 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015 x86_64
[ 82.358] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=2bbc3174-304c-411f-b098-d048b78bfba0 rw rootflags=data=writeback
[ 82.358] Build Date: 21 February 2015 01:31:01PM
[ 82.358]
[ 82.358] Current version of pixman: 0.32.6
[ 82.358] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 82.358] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 82.359] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Feb 22 13:40:12 2015
[ 82.450] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 82.450] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 82.513] (==) No Layout section. Using the first Screen section.
[ 82.513] (**) |-->Screen "Screen0" (0)
[ 82.513] (**) | |-->Monitor "Monitor0"
[ 82.513] (**) | |-->Device "Device0"
[ 82.513] (==) Automatically adding devices
[ 82.513] (==) Automatically enabling devices
[ 82.513] (==) Automatically adding GPU devices
[ 82.530] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF/".
[ 82.530] Entry deleted from font path.
[ 82.530] (Run 'mkfontdir' on "/usr/share/fonts/TTF/").
[ 82.530] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[ 82.530] Entry deleted from font path.
[ 82.530] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[ 82.530] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 82.530] Entry deleted from font path.
[ 82.530] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 82.530] Entry deleted from font path.
[ 82.530] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 82.531] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 82.531] Entry deleted from font path.
[ 82.531] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 82.531] (==) FontPath set to:
/usr/share/fonts/misc/
[ 82.531] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 82.531] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 82.537] (II) Loader magic: 0x814d40
[ 82.537] (II) Module ABI versions:
[ 82.537] X.Org ANSI C Emulation: 0.4
[ 82.537] X.Org Video Driver: 19.0
[ 82.537] X.Org XInput driver : 21.0
[ 82.537] X.Org Server Extension : 9.0
[ 82.538] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 82.539] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 82.539] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 82.541] (--) PCI:*(0:1:0:0) 10de:0407:106b:00a3 rev 161, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00007000/128, BIOS @ 0x????????/131072
[ 82.541] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 82.542] (II) LoadModule: "glx"
[ 82.565] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 83.942] (II) Module glx: vendor="NVIDIA Corporation"
[ 83.942] compiled for 4.0.2, module version = 1.0.0
[ 83.942] Module class: X.Org Server Extension
[ 83.948] (II) NVIDIA GLX Module 340.76 Thu Jan 22 11:24:42 PST 2015
[ 83.963] (II) LoadModule: "nouveau"
[ 83.991] (WW) Warning, couldn't open module nouveau
[ 83.991] (II) UnloadModule: "nouveau"
[ 83.991] (II) Unloading nouveau
[ 83.991] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 83.991] (EE) No drivers available.
[ 83.991] (EE)
Fatal server error:
[ 83.991] (EE) no screens found(EE)
[ 83.991] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 83.991] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 83.991] (EE)
Finally, here is my dmesg. I noticed the line "module license 'NVIDIA' taints kernel" but I have read in other posts that this is common and can be ignored. I also receive a lof of USB device descriptor errors but I am not sure if they are related.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.18.6-1-ARCH (builduser@tobias) (gcc version 4.9.2 20141224 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=2bbc3174-304c-411f-b098-d048b78bfba0 rw rootflags=data=writeback
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000be7c8fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000be7c9000-0x00000000be7cefff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000be7cf000-0x00000000be7f0fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000be7f1000-0x00000000be7f2fff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000be7f3000-0x00000000be7f3fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000be7f4000-0x00000000be7f4fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000be7f5000-0x00000000be84dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000be84e000-0x00000000be84efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000be84f000-0x00000000be8f0fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000be8f1000-0x00000000be8f1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000be8f2000-0x00000000bec9dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bec9e000-0x00000000bec9efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bec9f000-0x00000000beca0fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000beca1000-0x00000000beca4fff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000beca5000-0x00000000beca6fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000beca7000-0x00000000beca7fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000beca8000-0x00000000beca9fff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000becaa000-0x00000000becadfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000becae000-0x00000000becaefff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000becaf000-0x00000000becbbfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000becbc000-0x00000000becbffff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000becc0000-0x00000000becc0fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000becc1000-0x00000000becc4fff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000becc5000-0x00000000becc8fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000becc9000-0x00000000beccafff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000beccb000-0x00000000beccbfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000beccc000-0x00000000becd2fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000becd3000-0x00000000beed3fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000beed4000-0x00000000bef86fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bef87000-0x00000000bef88fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bef89000-0x00000000befdcfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000befdd000-0x00000000befeefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000befef000-0x00000000beff1fff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000beff2000-0x00000000beff4fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000beff5000-0x00000000beff5fff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000beff6000-0x00000000beffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf000000-0x00000000bf000fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf001000-0x00000000bf004fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf005000-0x00000000bf015fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf016000-0x00000000bf023fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf024000-0x00000000bf026fff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000bf027000-0x00000000bf02efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf02f000-0x00000000bf030fff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000bf031000-0x00000000bf031fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf032000-0x00000000bf032fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf033000-0x00000000bf033fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf034000-0x00000000bf034fff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000bf035000-0x00000000bf45dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf45e000-0x00000000bf460fff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000bf461000-0x00000000bf4ddfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf4de000-0x00000000bf4dffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf4e0000-0x00000000bf4e4fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf4e5000-0x00000000bf4e6fff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000bf4e7000-0x00000000bf509fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf50a000-0x00000000bf50afff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000bf50b000-0x00000000bfaa5fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfaa6000-0x00000000bfaa6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bfaa7000-0x00000000bfe9dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfe9e000-0x00000000bfe9efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bfe9f000-0x00000000bfec2fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfec3000-0x00000000bfec4fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bfec5000-0x00000000bfec7fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bfec8000-0x00000000bfecafff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bfecb000-0x00000000bfecbfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bfecc000-0x00000000bfedefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bfedf000-0x00000000bfeeefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bfeef000-0x00000000bfef8fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfef9000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f00f8000-0x00000000f00f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffa0000-0x00000000fffcffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bfffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v1.10 by Apple
[ 0.000000] efi: ACPI=0xbfeee000 ACPI 2.0=0xbfeee014 SMBIOS=0xbfec4000
[ 0.000000] efi: mem00: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000000000-0x000000000008f000) (0MB)
[ 0.000000] efi: mem01: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x000000000008f000-0x0000000000090000) (0MB)
[ 0.000000] efi: mem02: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000090000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem03: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000000100000-0x0000000000f3b000) (14MB)
[ 0.000000] efi: mem04: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000f3b000-0x000000003797a000) (874MB)
[ 0.000000] efi: mem05: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000003797a000-0x0000000037cb5000) (3MB)
[ 0.000000] efi: mem06: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000037cb5000-0x000000008aff2000) (1331MB)
[ 0.000000] efi: mem07: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000008aff2000-0x00000000b9a89000) (746MB)
[ 0.000000] efi: mem08: [Loader Code | | | | | |WB|WT|WC|UC] range=[0x00000000b9a89000-0x00000000ba5ac000) (11MB)
[ 0.000000] efi: mem09: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000ba5ac000-0x00000000bb0cf000) (11MB)
[ 0.000000] efi: mem10: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bb0cf000-0x00000000bd351000) (34MB)
[ 0.000000] efi: mem11: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bd351000-0x00000000bd843000) (4MB)
[ 0.000000] efi: mem12: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bd843000-0x00000000be6c0000) (14MB)
[ 0.000000] efi: mem13: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000be6c0000-0x00000000be6c5000) (0MB)
[ 0.000000] efi: mem14: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000be6c5000-0x00000000be72b000) (0MB)
[ 0.000000] efi: mem15: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000be72b000-0x00000000be72e000) (0MB)
[ 0.000000] efi: mem16: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000be72e000-0x00000000be777000) (0MB)
[ 0.000000] efi: mem17: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000be777000-0x00000000be7ac000) (0MB)
[ 0.000000] efi: mem18: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000be7ac000-0x00000000be7b4000) (0MB)
[ 0.000000] efi: mem19: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000be7b4000-0x00000000be7b7000) (0MB)
[ 0.000000] efi: mem20: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000be7b7000-0x00000000be7b9000) (0MB)
[ 0.000000] efi: mem21: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000be7b9000-0x00000000be7ba000) (0MB)
[ 0.000000] efi: mem22: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000be7ba000-0x00000000be7c2000) (0MB)
[ 0.000000] efi: mem23: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000be7c2000-0x00000000be7c9000) (0MB)
[ 0.000000] efi: mem24: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000be7c9000-0x00000000be7cf000) (0MB)
[ 0.000000] efi: mem25: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000be7cf000-0x00000000be7de000) (0MB)
[ 0.000000] efi: mem26: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000be7de000-0x00000000be7f1000) (0MB)
[ 0.000000] efi: mem27: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000be7f1000-0x00000000be7f3000) (0MB)
[ 0.000000] efi: mem28: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000be7f3000-0x00000000be7f4000) (0MB)
[ 0.000000] efi: mem29: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000be7f4000-0x00000000be7f5000) (0MB)
[ 0.000000] efi: mem30: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000be7f5000-0x00000000be7f8000) (0MB)
[ 0.000000] efi: mem31: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000be7f8000-0x00000000be7fa000) (0MB)
[ 0.000000] efi: mem32: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000be7fa000-0x00000000be7ff000) (0MB)
[ 0.000000] efi: mem33: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000be7ff000-0x00000000be80f000) (0MB)
[ 0.000000] efi: mem34: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000be80f000-0x00000000be812000) (0MB)
[ 0.000000] efi: mem35: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000be812000-0x00000000be815000) (0MB)
[ 0.000000] efi: mem36: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000be815000-0x00000000be818000) (0MB)
[ 0.000000] efi: mem37: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000be818000-0x00000000be81a000) (0MB)
[ 0.000000] efi: mem38: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000be81a000-0x00000000be81d000) (0MB)
[ 0.000000] efi: mem39: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000be81d000-0x00000000be81e000) (0MB)
[ 0.000000] efi: mem40: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000be81e000-0x00000000be81f000) (0MB)
[ 0.000000] efi: mem41: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000be81f000-0x00000000be820000) (0MB)
[ 0.000000] efi: mem42: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000be820000-0x00000000be821000) (0MB)
[ 0.000000] efi: mem43: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000be821000-0x00000000be829000) (0MB)
[ 0.000000] efi: mem44: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000be829000-0x00000000be82a000) (0MB)
[ 0.000000] efi: mem45: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000be82a000-0x00000000be82b000) (0MB)
[ 0.000000] efi: mem46: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000be82b000-0x00000000be830000) (0MB)
[ 0.000000] efi: mem47: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000be830000-0x00000000be834000) (0MB)
[ 0.000000] efi: mem48: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000be834000-0x00000000be835000) (0MB)
[ 0.000000] efi: mem49: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000be835000-0x00000000be837000) (0MB)
[ 0.000000] efi: mem50: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000be837000-0x00000000be839000) (0MB)
[ 0.000000] efi: mem51: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000be839000-0x00000000be83a000) (0MB)
[ 0.000000] efi: mem52: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000be83a000-0x00000000be83b000) (0MB)
[ 0.000000] efi: mem53: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000be83b000-0x00000000be841000) (0MB)
[ 0.000000] efi: mem54: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000be841000-0x00000000be842000) (0MB)
[ 0.000000] efi: mem55: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000be842000-0x00000000be84a000) (0MB)
[ 0.000000] efi: mem56: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000be84a000-0x00000000be84e000) (0MB)
[ 0.000000] efi: mem57: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000be84e000-0x00000000be84f000) (0MB)
[ 0.000000] efi: mem58: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000be84f000-0x00000000be850000) (0MB)
[ 0.000000] efi: mem59: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000be850000-0x00000000be851000) (0MB)
[ 0.000000] efi: mem60: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000be851000-0x00000000be855000) (0MB)
[ 0.000000] efi: mem61: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000be855000-0x00000000be856000) (0MB)
[ 0.000000] efi: mem62: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000be856000-0x00000000be85a000) (0MB)
[ 0.000000] efi: mem63: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000be85a000-0x00000000be85c000) (0MB)
[ 0.000000] efi: mem64: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000be85c000-0x00000000be8df000) (0MB)
[ 0.000000] efi: mem65: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000be8df000-0x00000000be8f1000) (0MB)
[ 0.000000] efi: mem66: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000be8f1000-0x00000000be8f2000) (0MB)
[ 0.000000] efi: mem67: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000be8f2000-0x00000000be8f3000) (0MB)
[ 0.000000] efi: mem68: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000be8f3000-0x00000000be8f5000) (0MB)
[ 0.000000] efi: mem69: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000be8f5000-0x00000000be995000) (0MB)
[ 0.000000] efi: mem70: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000be995000-0x00000000be9a0000) (0MB)
[ 0.000000] efi: mem71: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000be9a0000-0x00000000bec08000) (2MB)
[ 0.000000] efi: mem72: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000bec08000-0x00000000bec1f000) (0MB)
[ 0.000000] efi: mem73: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bec1f000-0x00000000bec24000) (0MB)
[ 0.000000] efi: mem74: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000bec24000-0x00000000bec2e000) (0MB)
[ 0.000000] efi: mem75: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bec2e000-0x00000000bec32000) (0MB)
[ 0.000000] efi: mem76: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000bec32000-0x00000000bec34000) (0MB)
[ 0.000000] efi: mem77: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bec34000-0x00000000bec38000) (0MB)
[ 0.000000] efi: mem78: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000bec38000-0x00000000bec59000) (0MB)
[ 0.000000] efi: mem79: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bec59000-0x00000000bec5c000) (0MB)
[ 0.000000] efi: mem80: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000bec5c000-0x00000000bec5e000) (0MB)
[ 0.000000] efi: mem81: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bec5e000-0x00000000bec61000) (0MB)
[ 0.000000] efi: mem82: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000bec61000-0x00000000bec65000) (0MB)
[ 0.000000] efi: mem83: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bec65000-0x00000000bec66000) (0MB)
[ 0.000000] efi: mem84: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000bec66000-0x00000000bec6b000) (0MB)
[ 0.000000] efi: mem85: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bec6b000-0x00000000bec6d000) (0MB)
[ 0.000000] efi: mem86: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000bec6d000-0x00000000bec7f000) (0MB)
[ 0.000000] efi: mem87: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bec7f000-0x00000000bec80000) (0MB)
[ 0.000000] efi: mem88: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000bec80000-0x00000000bec81000) (0MB)
[ 0.000000] efi: mem89: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bec81000-0x00000000bec82000) (0MB)
[ 0.000000] efi: mem90: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000bec82000-0x00000000bec8c000) (0MB)
[ 0.000000] efi: mem91: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bec8c000-0x00000000bec8e000) (0MB)
[ 0.000000] efi: mem92: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000bec8e000-0x00000000bec8f000) (0MB)
[ 0.000000] efi: mem93: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bec8f000-0x00000000bec91000) (0MB)
[ 0.000000] efi: mem94: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000bec91000-0x00000000bec94000) (0MB)
[ 0.000000] efi: mem95: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bec94000-0x00000000bec95000) (0MB)
[ 0.000000] efi: mem96: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000bec95000-0x00000000bec9e000) (0MB)
[ 0.000000] efi: mem97: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000bec9e000-0x00000000bec9f000) (0MB)
[ 0.000000] efi: mem98: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bec9f000-0x00000000beca1000) (0MB)
[ 0.000000] efi: mem99: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000beca1000-0x00000000beca5000) (0MB)
[ 0.000000] efi: mem100: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000beca5000-0x00000000beca7000) (0MB)
[ 0.000000] efi: mem101: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000beca7000-0x00000000beca8000) (0MB)
[ 0.000000] efi: mem102: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000beca8000-0x00000000becaa000) (0MB)
[ 0.000000] efi: mem103: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000becaa000-0x00000000becad000) (0MB)
[ 0.000000] efi: mem104: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000becad000-0x00000000becae000) (0MB)
[ 0.000000] efi: mem105: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000becae000-0x00000000becaf000) (0MB)
[ 0.000000] efi: mem106: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000becaf000-0x00000000becbc000) (0MB)
[ 0.000000] efi: mem107: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000becbc000-0x00000000becc0000) (0MB)
[ 0.000000] efi: mem108: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000becc0000-0x00000000becc1000) (0MB)
[ 0.000000] efi: mem109: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000becc1000-0x00000000becc5000) (0MB)
[ 0.000000] efi: mem110: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000becc5000-0x00000000becc8000) (0MB)
[ 0.000000] efi: mem111: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000becc8000-0x00000000becc9000) (0MB)
[ 0.000000] efi: mem112: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000becc9000-0x00000000beccb000) (0MB)
[ 0.000000] efi: mem113: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000beccb000-0x00000000beccc000) (0MB)
[ 0.000000] efi: mem114: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000beccc000-0x00000000becce000) (0MB)
[ 0.000000] efi: mem115: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000becce000-0x00000000becd0000) (0MB)
[ 0.000000] efi: mem116: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000becd0000-0x00000000becd1000) (0MB)
[ 0.000000] efi: mem117: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000becd1000-0x00000000becd2000) (0MB)
[ 0.000000] efi: mem118: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000becd2000-0x00000000becd3000) (0MB)
[ 0.000000] efi: mem119: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000becd3000-0x00000000beed4000) (2MB)
[ 0.000000] efi: mem120: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000beed4000-0x00000000beee4000) (0MB)
[ 0.000000] efi: mem121: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000beee4000-0x00000000beeed000) (0MB)
[ 0.000000] efi: mem122: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000beeed000-0x00000000beef6000) (0MB)
[ 0.000000] efi: mem123: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000beef6000-0x00000000beefa000) (0MB)
[ 0.000000] efi: mem124: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000beefa000-0x00000000bef84000) (0MB)
[ 0.000000] efi: mem125: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000bef84000-0x00000000bef85000) (0MB)
[ 0.000000] efi: mem126: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bef85000-0x00000000bef87000) (0MB)
[ 0.000000] efi: mem127: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000bef87000-0x00000000bef89000) (0MB)
[ 0.000000] efi: mem128: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bef89000-0x00000000befb2000) (0MB)
[ 0.000000] efi: mem129: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000befb2000-0x00000000befc3000) (0MB)
[ 0.000000] efi: mem130: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000befc3000-0x00000000befca000) (0MB)
[ 0.000000] efi: mem131: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000befca000-0x00000000befcc000) (0MB)
[ 0.000000] efi: mem132: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000befcc000-0x00000000befd9000) (0MB)
[ 0.000000] efi: mem133: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000befd9000-0x00000000befdb000) (0MB)
[ 0.000000] efi: mem134: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000befdb000-0x00000000befdc000) (0MB)
[ 0.000000] efi: mem135: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000befdc000-0x00000000befdd000) (0MB)
[ 0.000000] efi: mem136: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000befdd000-0x00000000befef000) (0MB)
[ 0.000000] efi: mem137: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000befef000-0x00000000beff2000) (0MB)
[ 0.000000] efi: mem138: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000beff2000-0x00000000beff3000) (0MB)
[ 0.000000] efi: mem139: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000beff3000-0x00000000beff5000) (0MB)
[ 0.000000] efi: mem140: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000beff5000-0x00000000beff6000) (0MB)
[ 0.000000] efi: mem141: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000beff6000-0x00000000beffb000) (0MB)
[ 0.000000] efi: mem142: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000beffb000-0x00000000beffd000) (0MB)
[ 0.000000] efi: mem143: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000beffd000-0x00000000beffe000) (0MB)
[ 0.000000] efi: mem144: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000beffe000-0x00000000bf000000) (0MB)
[ 0.000000] efi: mem145: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000bf000000-0x00000000bf001000) (0MB)
[ 0.000000] efi: mem146: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000bf001000-0x00000000bf002000) (0MB)
[ 0.000000] efi: mem147: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bf002000-0x00000000bf005000) (0MB)
[ 0.000000] efi: mem148: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000bf005000-0x00000000bf016000) (0MB)
[ 0.000000] efi: mem149: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000bf016000-0x00000000bf023000) (0MB)
[ 0.000000] efi: mem150: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bf023000-0x00000000bf024000) (0MB)
[ 0.000000] efi: mem151: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000bf024000-0x00000000bf027000) (0MB)
[ 0.000000] efi: mem152: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000bf027000-0x00000000bf02f000) (0MB)
[ 0.000000] efi: mem153: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000bf02f000-0x00000000bf031000) (0MB)
[ 0.000000] efi: mem154: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bf031000-0x00000000bf032000) (0MB)
[ 0.000000] efi: mem155: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000bf032000-0x00000000bf033000) (0MB)
[ 0.000000] efi: mem156: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000bf033000-0x00000000bf034000) (0MB)
[ 0.000000] efi: mem157: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000bf034000-0x00000000bf035000) (0MB)
[ 0.000000] efi: mem158: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bf035000-0x00000000bf457000) (4MB)
[ 0.000000] efi: mem159: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000bf457000-0x00000000bf45d000) (0MB)
[ 0.000000] efi: mem160: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bf45d000-0x00000000bf45e000) (0MB)
[ 0.000000] efi: mem161: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000bf45e000-0x00000000bf461000) (0MB)
[ 0.000000] efi: mem162: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bf461000-0x00000000bf4d7000) (0MB)
[ 0.000000] efi: mem163: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000bf4d7000-0x00000000bf4d8000) (0MB)
[ 0.000000] efi: mem164: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bf4d8000-0x00000000bf4d9000) (0MB)
[ 0.000000] efi: mem165: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000bf4d9000-0x00000000bf4dd000) (0MB)
[ 0.000000] efi: mem166: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bf4dd000-0x00000000bf4de000) (0MB)
[ 0.000000] efi: mem167: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000bf4de000-0x00000000bf4e0000) (0MB)
[ 0.000000] efi: mem168: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000bf4e0000-0x00000000bf4e1000) (0MB)
[ 0.000000] efi: mem169: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bf4e1000-0x00000000bf4e3000) (0MB)
[ 0.000000] efi: mem170: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000bf4e3000-0x00000000bf4e5000) (0MB)
[ 0.000000] efi: mem171: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000bf4e5000-0x00000000bf4e7000) (0MB)
[ 0.000000] efi: mem172: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bf4e7000-0x00000000bf508000) (0MB)
[ 0.000000] efi: mem173: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000bf508000-0x00000000bf509000) (0MB)
[ 0.000000] efi: mem174: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bf509000-0x00000000bf50a000) (0MB)
[ 0.000000] efi: mem175: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000bf50a000-0x00000000bf50b000) (0MB)
[ 0.000000] efi: mem176: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bf50b000-0x00000000bf50c000) (0MB)
[ 0.000000] efi: mem177: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000bf50c000-0x00000000bf50d000) (0MB)
[ 0.000000] efi: mem178: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bf50d000-0x00000000bf50f000) (0MB)
[ 0.000000] efi: mem179: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000bf50f000-0x00000000bf510000) (0MB)
[ 0.000000] efi: mem180: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bf510000-0x00000000bfaa6000) (5MB)
[ 0.000000] efi: mem181: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000bfaa6000-0x00000000bfaa7000) (0MB)
[ 0.000000] efi: mem182: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bfaa7000-0x00000000bfe9e000) (3MB)
[ 0.000000] efi: mem183: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000bfe9e000-0x00000000bfe9f000) (0MB)
[ 0.000000] efi: mem184: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bfe9f000-0x00000000bfeb6000) (0MB)
[ 0.000000] efi: mem185: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x00000000bfeb6000-0x00000000bfec3000) (0MB)
[ 0.000000] efi: mem186: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000bfec3000-0x00000000bfec5000) (0MB)
[ 0.000000] efi: mem187: [ACPI Reclaim Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bfec5000-0x00000000bfec8000) (0MB)
[ 0.000000] efi: mem188: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000bfec8000-0x00000000bfecb000) (0MB)
[ 0.000000] efi: mem189: [ACPI Reclaim Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bfecb000-0x00000000bfecc000) (0MB)
[ 0.000000] efi: mem190: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000bfecc000-0x00000000bfedf000) (0MB)
[ 0.000000] efi: mem191: [ACPI Reclaim Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bfedf000-0x00000000bfeef000) (0MB)
[ 0.000000] efi: mem192: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bfeef000-0x00000000bfef9000) (0MB)
[ 0.000000] efi: mem193: [Reserved | | | | | |WB|WT|WC|UC] range=[0x00000000bfef9000-0x00000000bfeff000) (0MB)
[ 0.000000] efi: mem194: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000bfeff000-0x00000000bff00000) (0MB)
[ 0.000000] efi: mem195: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000100000000-0x00000001c0000000) (3072MB)
[ 0.000000] efi: mem196: [Reserved |RUN| | | | | | | | ] range=[0x00000000000a0000-0x00000000000c0000) (0MB)
[ 0.000000] efi: mem197: [Reserved |RUN| | | | | | | | ] range=[0x00000000bff00000-0x00000000c0000000) (1MB)
[ 0.000000] efi: mem198: [Memory Mapped I/O |RUN| | | | | | | | ] range=[0x00000000f00f8000-0x00000000f00f9000) (0MB)
[ 0.000000] efi: mem199: [Memory Mapped I/O |RUN| | | | | | | | ] range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem200: [Memory Mapped I/O |RUN| | | | | | | | ] range=[0x00000000fffa0000-0x00000000fffd0000) (0MB)
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Apple Inc. MacBookPro4,1/Mac-F42C89C8, BIOS MBP41.88Z.00C1.B03.0802271651 02/27/08
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x1c0000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 100000000 mask F80000000 write-back
[ 0.000000] 4 base 180000000 mask FC0000000 write-back
[ 0.000000] 5 base 0BFF00000 mask FFFF00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xbfef9 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[ 0.000000] BRK [0x01b38000, 0x01b38fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x1bfe00000-0x1bfffffff]
[ 0.000000] [mem 0x1bfe00000-0x1bfffffff] page 2M
[ 0.000000] BRK [0x01b39000, 0x01b39fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x1bc000000-0x1bfdfffff]
[ 0.000000] [mem 0x1bc000000-0x1bfdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x180000000-0x1bbffffff]
[ 0.000000] [mem 0x180000000-0x1bbffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbe7c8fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbe5fffff] page 2M
[ 0.000000] [mem 0xbe600000-0xbe7c8fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbe7cf000-0xbe7f0fff]
[ 0.000000] [mem 0xbe7cf000-0xbe7f0fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbe7f3000-0xbe7f3fff]
[ 0.000000] [mem 0xbe7f3000-0xbe7f3fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbe7f5000-0xbe84dfff]
[ 0.000000] [mem 0xbe7f5000-0xbe84dfff] page 4k
[ 0.000000] BRK [0x01b3a000, 0x01b3afff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbe84f000-0xbe8f0fff]
[ 0.000000] [mem 0xbe84f000-0xbe8f0fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbe8f2000-0xbec9dfff]
[ 0.000000] [mem 0xbe8f2000-0xbe9fffff] page 4k
[ 0.000000] [mem 0xbea00000-0xbebfffff] page 2M
[ 0.000000] [mem 0xbec00000-0xbec9dfff] page 4k
[ 0.000000] BRK [0x01b3b000, 0x01b3bfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbec9f000-0xbeca0fff]
[ 0.000000] [mem 0xbec9f000-0xbeca0fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbeca5000-0xbeca6fff]
[ 0.000000] [mem 0xbeca5000-0xbeca6fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbecaa000-0xbecadfff]
[ 0.000000] [mem 0xbecaa000-0xbecadfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbecaf000-0xbecbbfff]
[ 0.000000] [mem 0xbecaf000-0xbecbbfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbecc0000-0xbecc0fff]
[ 0.000000] [mem 0xbecc0000-0xbecc0fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbecc5000-0xbecc8fff]
[ 0.000000] [mem 0xbecc5000-0xbecc8fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbeccc000-0xbecd2fff]
[ 0.000000] [mem 0xbeccc000-0xbecd2fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbeed4000-0xbef86fff]
[ 0.000000] [mem 0xbeed4000-0xbef86fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbef89000-0xbefdcfff]
[ 0.000000] [mem 0xbef89000-0xbefdcfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbeff2000-0xbeff4fff]
[ 0.000000] [mem 0xbeff2000-0xbeff4fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbeff6000-0xbeffffff]
[ 0.000000] [mem 0xbeff6000-0xbeffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf001000-0xbf004fff]
[ 0.000000] [mem 0xbf001000-0xbf004fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf016000-0xbf023fff]
[ 0.000000] [mem 0xbf016000-0xbf023fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf027000-0xbf02efff]
[ 0.000000] [mem 0xbf027000-0xbf02efff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf031000-0xbf031fff]
[ 0.000000] [mem 0xbf031000-0xbf031fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf033000-0xbf033fff]
[ 0.000000] [mem 0xbf033000-0xbf033fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf035000-0xbf45dfff]
[ 0.000000] [mem 0xbf035000-0xbf1fffff] page 4k
[ 0.000000] [mem 0xbf200000-0xbf3fffff] page 2M
[ 0.000000] [mem 0xbf400000-0xbf45dfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf461000-0xbf4ddfff]
[ 0.000000] [mem 0xbf461000-0xbf4ddfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf4e0000-0xbf4e4fff]
[ 0.000000] [mem 0xbf4e0000-0xbf4e4fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf4e7000-0xbf509fff]
[ 0.000000] [mem 0xbf4e7000-0xbf509fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf50b000-0xbfaa5fff]
[ 0.000000] [mem 0xbf50b000-0xbf5fffff] page 4k
[ 0.000000] [mem 0xbf600000-0xbf9fffff] page 2M
[ 0.000000] [mem 0xbfa00000-0xbfaa5fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbfaa7000-0xbfe9dfff]
[ 0.000000] [mem 0xbfaa7000-0xbfbfffff] page 4k
[ 0.000000] [mem 0xbfc00000-0xbfdfffff] page 2M
[ 0.000000] [mem 0xbfe00000-0xbfe9dfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbfe9f000-0xbfec2fff]
[ 0.000000] [mem 0xbfe9f000-0xbfec2fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbfeef000-0xbfef8fff]
[ 0.000000] [mem 0xbfeef000-0xbfef8fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff]
[ 0.000000] [mem 0x100000000-0x17fffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x3797a000-0x37cb4fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000BFEEE014 000024 (v02 APPLE )
[ 0.000000] ACPI: XSDT 0x00000000BFEEE1C0 00007C (v01 APPLE Apple00 000000C1 01000013)
[ 0.000000] ACPI: FACP 0x00000000BFEEC000 0000F4 (v03 APPLE Apple00 000000C1 Loki 0000005F)
[ 0.000000] ACPI: DSDT 0x00000000BFEE1000 00498E (v01 APPLE MacBookP 00040001 INTL 20061109)
[ 0.000000] ACPI: FACS 0x00000000BFECC000 000040
[ 0.000000] ACPI: HPET 0x00000000BFEEB000 000038 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: APIC 0x00000000BFEEA000 000068 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: MCFG 0x00000000BFEE9000 00003C (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ASF! 0x00000000BFEE8000 0000A5 (v32 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SBST 0x00000000BFEE7000 000030 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ECDT 0x00000000BFEE6000 000053 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SSDT 0x00000000BFECB000 000137 (v01 APPLE SataAhci 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000BFEC7000 0004DC (v01 APPLE CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000BFEC6000 00025F (v01 APPLE Cpu0Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000BFEC5000 0000A6 (v01 APPLE Cpu1Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001bfffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x1bfff2000-0x1bfff5fff]
[ 0.000000] [ffffea0000000000-ffffea0006ffffff] PMD -> [ffff8801b9600000-ffff8801bf5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x1bfffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0008efff]
[ 0.000000] node 0: [mem 0x00090000-0x0009ffff]
[ 0.000000] node 0: [mem 0x00100000-0xbe7c8fff]
[ 0.000000] node 0: [mem 0xbe7cf000-0xbe7f0fff]
[ 0.000000] node 0: [mem 0xbe7f3000-0xbe7f3fff]
[ 0.000000] node 0: [mem 0xbe7f5000-0xbe84dfff]
[ 0.000000] node 0: [mem 0xbe84f000-0xbe8f0fff]
[ 0.000000] node 0: [mem 0xbe8f2000-0xbec9dfff]
[ 0.000000] node 0: [mem 0xbec9f000-0xbeca0fff]
[ 0.000000] node 0: [mem 0xbeca5000-0xbeca6fff]
[ 0.000000] node 0: [mem 0xbecaa000-0xbecadfff]
[ 0.000000] node 0: [mem 0xbecaf000-0xbecbbfff]
[ 0.000000] node 0: [mem 0xbecc0000-0xbecc0fff]
[ 0.000000] node 0: [mem 0xbecc5000-0xbecc8fff]
[ 0.000000] node 0: [mem 0xbeccc000-0xbecd2fff]
[ 0.000000] node 0: [mem 0xbeed4000-0xbef86fff]
[ 0.000000] node 0: [mem 0xbef89000-0xbefdcfff]
[ 0.000000] node 0: [mem 0xbeff2000-0xbeff4fff]
[ 0.000000] node 0: [mem 0xbeff6000-0xbeffffff]
[ 0.000000] node 0: [mem 0xbf001000-0xbf004fff]
[ 0.000000] node 0: [mem 0xbf016000-0xbf023fff]
[ 0.000000] node 0: [mem 0xbf027000-0xbf02efff]
[ 0.000000] node 0: [mem 0xbf031000-0xbf031fff]
[ 0.000000] node 0: [mem 0xbf033000-0xbf033fff]
[ 0.000000] node 0: [mem 0xbf035000-0xbf45dfff]
[ 0.000000] node 0: [mem 0xbf461000-0xbf4ddfff]
[ 0.000000] node 0: [mem 0xbf4e0000-0xbf4e4fff]
[ 0.000000] node 0: [mem 0xbf4e7000-0xbf509fff]
[ 0.000000] node 0: [mem 0xbf50b000-0xbfaa5fff]
[ 0.000000] node 0: [mem 0xbfaa7000-0xbfe9dfff]
[ 0.000000] node 0: [mem 0xbfe9f000-0xbfec2fff]
[ 0.000000] node 0: [mem 0xbfeef000-0xbfef8fff]
[ 0.000000] node 0: [mem 0x100000000-0x1bfffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x1bfffffff]
[ 0.000000] On node 0 totalpages: 1571856
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 25 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12210 pages used for memmap
[ 0.000000] DMA32 zone: 781426 pages, LIFO batch:31
[ 0.000000] Normal zone: 12288 pages used for memmap
[ 0.000000] Normal zone: 786432 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbe7c9000-0xbe7cefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbe7f1000-0xbe7f2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbe7f4000-0xbe7f4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbe84e000-0xbe84efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbe8f1000-0xbe8f1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbec9e000-0xbec9efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbeca1000-0xbeca4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbeca7000-0xbeca7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbeca8000-0xbeca9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbecae000-0xbecaefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbecbc000-0xbecbffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbecc1000-0xbecc4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbecc9000-0xbeccafff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbeccb000-0xbeccbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbecd3000-0xbeed3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbef87000-0xbef88fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbefdd000-0xbefeefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbefef000-0xbeff1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbeff5000-0xbeff5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf000000-0xbf000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf005000-0xbf015fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf024000-0xbf026fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf02f000-0xbf030fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf032000-0xbf032fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf034000-0xbf034fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf45e000-0xbf460fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf4de000-0xbf4dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf4e5000-0xbf4e6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf50a000-0xbf50afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfaa6000-0xbfaa6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfe9e000-0xbfe9efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfec3000-0xbfec4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfec5000-0xbfec7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfec8000-0xbfecafff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfecb000-0xbfecbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfecc000-0xbfedefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfedf000-0xbfeeefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfef9000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xf00f7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf00f8000-0xf00f8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf00f9000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfff9ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfffa0000-0xfffcffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfffd0000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xf00f7fff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff8801bfc00000 s82880 r8192 d31808 u1048576
[ 0.000000] pcpu-alloc: s82880 r8192 d31808 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1547269
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=2bbc3174-304c-411f-b098-d048b78bfba0 rw rootflags=data=writeback
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 6036000K/6287424K available (5481K kernel code, 908K rwdata, 1720K rodata, 1160K init, 1184K bss, 251424K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:8448 nr_irqs:440 0
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 25165824 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2394.123 MHz processor
[ 0.003351] Calibrating delay loop (skipped), value calculated using timer frequency.. 4790.75 BogoMIPS (lpj=7980410)
[ 0.003354] pid_max: default: 32768 minimum: 301
[ 0.003366] ACPI: Core revision 20140926
[ 0.008167] ACPI: All ACPI Tables successfully acquired
[ 0.010034] Security Framework initialized
[ 0.010045] Yama: becoming mindful.
[ 0.010746] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.016636] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.018879] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.018895] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.019312] Initializing cgroup subsys memory
[ 0.019323] Initializing cgroup subsys devices
[ 0.019328] Initializing cgroup subsys freezer
[ 0.019332] Initializing cgroup subsys net_cls
[ 0.019336] Initializing cgroup subsys blkio
[ 0.019363] CPU: Physical Processor ID: 0
[ 0.019364] CPU: Processor Core ID: 0
[ 0.019367] mce: CPU supports 6 MCE banks
[ 0.019375] CPU0: Thermal monitoring enabled (TM2)
[ 0.019385] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.019487] Freeing SMP alternatives memory: 20K (ffffffff81a07000 - ffffffff81a0c000)
[ 0.022951] ftrace: allocating 20931 entries in 82 pages
[ 0.030560] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.063828] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz (fam: 06, model: 17, stepping: 06)
[ 0.066666] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.066666] ... version: 2
[ 0.066666] ... bit width: 40
[ 0.066666] ... generic registers: 2
[ 0.066666] ... value mask: 000000ffffffffff
[ 0.066666] ... max period: 000000007fffffff
[ 0.066666] ... fixed-purpose events: 3
[ 0.066666] ... event mask: 0000000700000003
[ 0.083415] x86: Booting SMP configuration:
[ 0.083417] .... node #0, CPUs: #1
[ 0.096641] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.096657] x86: Booted up 1 node, 2 CPUs
[ 0.096660] smpboot: Total of 2 processors activated (9580.51 BogoMIPS)
[ 0.098531] devtmpfs: initialized
[ 0.100018] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[ 0.100021] PM: Registering ACPI NVS region [mem 0xbecd3000-0xbeed3fff] (2101248 bytes)
[ 0.100053] PM: Registering ACPI NVS region [mem 0xbef87000-0xbef88fff] (8192 bytes)
[ 0.100055] PM: Registering ACPI NVS region [mem 0xbfec3000-0xbfec4fff] (8192 bytes)
[ 0.100056] PM: Registering ACPI NVS region [mem 0xbfec8000-0xbfecafff] (12288 bytes)
[ 0.100058] PM: Registering ACPI NVS region [mem 0xbfecc000-0xbfedefff] (77824 bytes)
[ 0.103364] pinctrl core: initialized pinctrl subsystem
[ 0.103423] RTC time: 18:38:50, date: 02/22/15
[ 0.103539] NET: Registered protocol family 16
[ 0.113338] cpuidle: using governor ladder
[ 0.130003] cpuidle: using governor menu
[ 0.130039] ACPI: bus type PCI registered
[ 0.130041] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.130136] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)
[ 0.130140] PCI: not using MMCONFIG
[ 0.130142] PCI: Using configuration type 1 for base access
[ 0.143402] ACPI: Added _OSI(Module Device)
[ 0.143402] ACPI: Added _OSI(Processor Device)
[ 0.143402] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.143402] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.144205] ACPI : EC: EC description table is found, configuring boot EC
[ 0.160433] ACPI: Dynamic OEM Table Load:
[ 0.160442] ACPI: SSDT 0xFFFF8801B6BEC800 000340 (v01 APPLE Cpu0Ist 00003000 INTL 20061109)
[ 0.160729] ACPI: Dynamic OEM Table Load:
[ 0.160735] ACPI: SSDT 0xFFFF8801B6BECC00 0002AD (v01 APPLE Cpu0Cst 00003001 INTL 20061109)
[ 0.186839] ACPI: Dynamic OEM Table Load:
[ 0.186846] ACPI: SSDT 0xFFFF8801B6AA1B00 0000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109)
[ 0.187100] ACPI: Dynamic OEM Table Load:
[ 0.187106] ACPI: SSDT 0xFFFF8801B6AA9CC0 000085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109)
[ 0.213479] ACPI: Interpreter enabled
[ 0.213485] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
[ 0.213489] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
[ 0.213503] ACPI: (supports S0 S3 S4 S5)
[ 0.213505] ACPI: Using IOAPIC for interrupt routing
[ 0.213521] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)
[ 0.214556] PCI: MMCONFIG at [mem 0xf0000000-0xffffffff] reserved in ACPI motherboard resources
[ 0.214560] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) (size reduced!)
[ 0.214703] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.216616] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.216622] acpi PNP0A08:00: _OSC: OS assumes control of [PCIeHotplug SHPCHotplug AER PCIeCapability]
[ 0.216866] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.217047] PCI host bridge to bus 0000:00
[ 0.217051] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.217053] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.217055] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.217057] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.217059] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.217064] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.217066] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.217068] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[ 0.217070] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.217072] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.217074] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.217076] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.217078] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.217080] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.217082] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 0.217085] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 0.217087] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[ 0.217089] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
[ 0.217099] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
[ 0.217208] pci 0000:00:01.0: [8086:2a01] type 01 class 0x060400
[ 0.217256] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.217373] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
[ 0.217450] pci 0000:00:1a.0: reg 0x20: [io 0x80c0-0x80df]
[ 0.217538] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.217598] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
[ 0.217662] pci 0000:00:1a.1: reg 0x20: [io 0x80a0-0x80bf]
[ 0.217750] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.217836] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
[ 0.217878] pci 0000:00:1a.7: reg 0x10: [mem 0xdb504c00-0xdb504fff]
[ 0.218055] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.218111] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.218181] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[ 0.218211] pci 0000:00:1b.0: reg 0x10: [mem 0xdb500000-0xdb503fff 64bit]
[ 0.218339] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.218450] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
[ 0.218596] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.218707] pci 0000:00:1c.2: [8086:2843] type 01 class 0x060400
[ 0.218839] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.218952] pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400
[ 0.219098] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.219206] pci 0000:00:1c.5: [8086:2849] type 01 class 0x060400
[ 0.219330] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.219438] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[ 0.219551] pci 0000:00:1d.0: reg 0x20: [io 0x8080-0x809f]
[ 0.219638] pci 0000:00:1d.0: System wakeup di -
Blackberry Torch 9800 Freeze and Re-boot random times
Hi everyone,
I have recently had a few application upgrades and since this my phone will at random freeze and then re-boot, which takes an age, especially when you need to make a call !
I have tried a backup then a security wipe and did not re-install the applications but alas it is still doing it.
Could this be the software ?
There is no option to downgrade in the menu to try the previous software edition.
Any help will be very welcome. Steveone of the guys here had a random reboot issue and it was the battery causing it.
he didnt mention freezing, but if it was an app.
On device go to Options, Device, Application Management is a great way to see what your apps are doing with your CPU usage on Smartphone. Just slide top bar to CPU and see what is going on. Also touch the CPU menu to see other time variables. I found out that an app was eating away CPU cycles on mine
Disable Compression on media card? go to Options, Device, Storage
using a custom theme? try it for a day the factory default one to rule out your theme
remember the esc key closes most apps, except for GPS and some chat clients. the other apps need to use menu and then exit or close. The farthest key to the right is a home key and does not close any apps per se but will end calls.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V
Maybe you are looking for
-
Guten Abend Community, erst einmal bin ich neu hier und leider auch hier, da ich ein Problem habe welches ich einfach nicht gelöst bekomme. Ich musste mein System kommplett neu Installieren und habe anschließend Adobe Web Premium 5 Installiert was au
-
How do I add os x tiger to a partition on intel mac using os x lion?
I'm trying to add os x tiger to a partition so I can dual boot between tiger and lion. However, I'm not able to boot the computer using the tiger dvd by holding the c button during start up. Anyone know how to do this?
-
I'm using the new 24" LED Cinema display with a new unibody MacBook Pro. In System Preferences the font smoothing type is defaulted to "Main Display". Is this setting OK, or should it be set to "Flat Panel"? Or one of the other settings? Thanks! Larr
-
Depot Returns to Plant ( Business Process - STO Depot to Plant)
Hi Lakshmipathi, i have a problem in Plant to Depot Returns i am following below procedure for Depot returns to plant Create STO Create Delivery In Background Create Depot Excise Invoice (J1IJ) Billing GR for OutBound Delivery J1IEX - Capture & post
-
Is it possible for users connected to the guest network to use iTunes DJ for an iTunes library which is on a Mac connected to the main network?