X60 runs hot on ultrabase

My X60 seems to run very hot on it's ultrabase. Any suggestions?

Hi jeep002 and welcome to the community,
[IMG]http://i43.tinypic.com/102t6c3.png[/IMG]
With a Crackle movie playing full screen and Windows media playing music in the background, my x60 runs around 61C on its Ultrabase with the fan control running.
Without the fan control: 67C
Off the Ultrabase with the fan control: 53C
Off the Ultrabase without the fan control: 57C
It will run hotter on the Ultrabase just because of less circulation on the bottom of it.
How hot does yours run?
Dave
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Similar Messages

HP Pavilion Elite E9120F running hot, what fan do I need to buy. It is running at over 90 degrees

My desktop HP Pavilion E9120F began to run hot, fan was coming on very slow, I cleaned really good, was a bit dusty.. I think this may have caused the problem. It is not running at 90 degrees farenheit. I replaced the video card so I could run video programs thinking that would fix it, didn't. I am wondering do I need to buy a new fan to keep the temp down or is my CPU damaged and can't be fixed? I can still run my programs but CPU gets to 100% and it never gets under 78 degrees. Help I don't know if I should just buy new fans or what?

If this is your CPU, it's range is 55°C - 71°C. Here is how to measure a fan
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Mid 2013 macbook air: battery drain / running hot

Hi there,
For the last couple weeks my MBA starts to run hot and drain battery fast if I've been using it for a few hours.
I use it a lot on most days and connect to powercord only once it drops down low, like below 20%.
Have just seen other posts who recommend doing that at 50% battery and will now do the same.
However my question is: have i ruined my battery in the meantime?
AND/OR is there something else i can do to get battery running like it used to, and stop the loud fan switching on all the time because it's all running too hot?
I've copied in an etrecheck in case that helps diagnose more....
thanks heaps for any help!
Hardware Information:
          MacBook Air (13-inch, Mid 2013)
          MacBook Air - model: MacBookAir6,2
          1 1.7 GHz Intel Core i7 CPU: 2 cores
          8 GB RAM
Video Information:
          Intel HD Graphics 5000 - VRAM: 1024 MB
System Software:
          OS X 10.9.2 (13C64) - Uptime: 5 days 21:16:2
Disk Information:
          APPLE SSD SM0512F disk0 : (500.28 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    disk0s2 (disk0s2) <not mounted>: 499.42 GB
                    Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
          Apple Internal Memory Card Reader
          Apple Inc. BRCM20702 Hub
                    Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Launch Daemons:
          [System] com.adobe.fpsaud.plist 3rd-Party support link
          [System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
          [System] net.cloudpath.HelperTool.plist 3rd-Party support link
Launch Agents:
          [System] com.divx.dms.agent.plist 3rd-Party support link
          [System] com.divx.update.agent.plist 3rd-Party support link
          [System] com.sierrawireless.SwitchTool.plist 3rd-Party support link
User Launch Agents:
          [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
          [not loaded] com.google.keystone.agent.plist 3rd-Party support link
User Login Items:
          iTunesHelper
          Calendar
          Dropbox
          Google Drive
          Mail
          Twitter
          Disk Doctor
          UCM Launch Agent
Internet Plug-ins:
          FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
          DivX Web Player: Version: 3.1.0.13 - SDK 10.5 3rd-Party support link
          AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 3rd-Party support link
          AdobePDFViewer: Version: 11.0.06 - SDK 10.6 3rd-Party support link
          Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
          OVSHelper: Version: 1.1 3rd-Party support link
          Default Browser: Version: 537 - SDK 10.9
          QuickTime Plugin: Version: 7.7.3
          SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
          Silverlight: Version: 5.1.20913.0 - SDK 10.6 3rd-Party support link
Safari Extensions:
          Searchme: Version: 1.2
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
          Flash Player 3rd-Party support link
Old Applications:
          /Library/Application Support/Microsoft/MERP2.0
                    Microsoft Error Reporting:          Version: 2.2.9 - SDK 10.4 3rd-Party support link
                    Microsoft Ship Asserts:          Version: 1.1.4 - SDK 10.4 3rd-Party support link
          Solver:          Version: 1.0 - SDK 10.5 3rd-Party support link
                    /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
          /Library/Application Support/DivX
                    DivXUpdate:          Version: 1.0 - SDK 10.5 3rd-Party support link
                    DivXMediaServer:          Version: 10.1 - SDK 10.5 3rd-Party support link
                    DivXTransferWizard:          Version: 10.1.0 (Build 10.1.0.102) - SDK 10.5 3rd-Party support link
                    DMSLaunch:          Version: 1.0 - SDK 10.5 3rd-Party support link
          SLLauncher:          Version: 1.0 - SDK 10.5 3rd-Party support link
                    /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
          /Applications/Microsoft Office 2011/Office
                    Open XML for Excel:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Office Setup Assistant:          Version: 14.3.8 - SDK 10.5 3rd-Party support link
                    Microsoft Alerts Daemon:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    SyncServicesAgent:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Database Daemon:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Graph:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Database Utility:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Office Reminders:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Upload Center:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    My Day:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Chart Converter:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Clip Gallery:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
          /Applications/Microsoft Office 2011
                    Microsoft PowerPoint:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Excel:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Outlook:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Word:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Document Connection:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
          Microsoft Language Register:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
          iSkysoft Helper Compact:          Version: 2.2.6.4 - SDK 10.5 3rd-Party support link
                    /Users/[redacted]/Library/Application Support/Helper/iSkysoft Helper Compact.app
          Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4 3rd-Party support link
                    /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
          /Applications/iWork '09
          Mobile Broadband Manager:          Version: 3.15 - SDK 10.5 3rd-Party support link
          DivX Converter:          Version: 10.1.0 (Build 10.1.0.166) - SDK 10.5 3rd-Party support link
          DivX Player:          Version: 10.1.0 (Build 11.3.0.40) - SDK 10.5 3rd-Party support link
Time Machine:
          Auto backup: YES
          Volumes being backed up:
          Destinations:
                    Data [Network] (Last used)
                    Total size: 2
                    Total number of backups: 57
                    Oldest backup: 2013-07-26 15:57:23 +0000
                    Last backup: 2014-03-18 12:31:47 +0000
                    Size of backup disk: Excellent
                              Backup size 2 > (Disk size 0 B X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
             100%          Locum
               2%          WindowServer
               1%          EtreCheck
               1%          Google Drive
               0%          Microsoft Word
Top Processes by Memory:
          213 MB          Safari
          188 MB          Finder
          156 MB          com.apple.WebKit.WebContent
          131 MB          Mail
          115 MB          Microsoft Word
Virtual Memory Information:
          2.33 GB          Free RAM
          3.60 GB          Active RAM
          626 MB          Inactive RAM
          1005 MB          Wired RAM
          7.65 GB          Page-ins
          64 MB          Page-outs

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/\/Users\/Shared\//b'$'\ns/\/Users\/[^/]+\//\/Users\/USER\//g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '1d;/:$/{s/ *:$//;x;s/\n//g;s/\).*/)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Environment"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^$.+$ //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{print "not "}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print $3}'`; Ps "Netmask"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Downloaded new iOS for iPhone 5. Now the handset is running hot, keeps freezing on different screens, won't charge on official charger ( only charges on crap poundland one) and battery is loosing 1% every two minutes!

Downloaded new iOS for iPhone 5. Now the handset is running hot, keeps freezing on different screens, won't charge on official charger ( only charges on crap poundland one) and battery is loosing 1% every two minutes! I've closed all apps and reset the complete phone but no luck. Any one know what else I can try apart from a new phone?

I have done a factory reset at 45% battery. After the reset it's still hot and at 35% now

High CPU usage - Rapid Battery Drain - Running HOT

Looking for help.. PLEASE!
Z10 - Model STL100-3 Software release 10.2.1.2179
Symptoms;
Occasionally, and for no apparent reason, I notice my Z10 getting hot in my pocket. I run the device monitor App and see a very high CPU usage, which consequently drains the batter very quickly.
I've tried all the solutions from every support group thread and blog. And I mean ALL!
Pulling the battery
Replaced the battery
Removed the SIM
Deleted G Mail
Removed all 3rd party Apps (2)
Stopped email sync
Stopped calendar sync
Turned off all radio
Turned Off Wi-Fi
Let it sit for hours, even days to let it finish doing whatever its trying to do
Etc Etc Etc.
Finally, I called BB support, they wanted $50 to talk to someone. I told them the issue, they said the device is bad and must be replaced. I said its software related!! They said.. no, its a hardware issue. Device is under warranty and they want me to just go get a new one. I don't want a new one, I want a fix! Stop the waste of BB $
Temporary solution
Eventually, I decided I would do a restore, back to the factory settings, and here's when I found something
I run BB Link, connect the device, do a back-up... and LOW AND BEHOLD.. this fixes the high CPU usage and the device runs great, very cool, low cpu and extremely long battery life.
Sadly! .. this problem reoccurs, after a few days, sometimes after a couple of weeks and just out of the blue.
I can force this fault to occur, simply by doing a restart of the device. Sure enough, it will run hot, use all the cpu and I will have to do a back-up to get it to settle down again. I've tried to wait for the so called 'indexing' to finish, but it never stops running with high cpu and doesn't help.
Can any one tell me whats happening and how to make this a permanent fix?
There are hundreds if not thousands of people having very similar issues, and many different methods to fix it. Its my belief that there is an underlying bigger problem that relates to all these differing fixes, but as yet.. I cant find it and none of these fixes work for me. For now... I will keep doing the occasional back-up and hope I get a response that can help.
Thanks to all that read this.

curve8530curve8330 wrote:
The heat may be normal. After a little water damage incident, which I repaired, I disassembled my Z10 the find a small heat sink will thermal compound. This helps dissipate heat efficiently. I found a large number of air bubbles and possibly a large air pocket by the way the paste stuck to both sides. I removed the old paste and replaced it with artic silver paste and the z10 has been much much cooler. It use to run about 105*f and now it is around 85*f.
See this thread I posted for before and after pictures using a thermal imager.
http://supportforums.blackberry.com/t5/BlackBerry-Z10/Z10-heating-up-fix/m-p/3031220#M71390
@Curve8530 .....as much a s your discovery is appreciated, I hardly believe that most people will actually dismantle their phone to remove the paste and replace with arctic silver. Besides, what you are doing is not a fix for the actual problem....
In most cases, this heat is associated with apps using the CPU resources beyond the normal limits.
As an easy fix, finding and removing the app(s) in question followed by a reboot, solves the issue. In some cases an OS reload is necessary.... but under no circumstances I would even remotely suggest to any member to dismantle their phone and do what you did...

Windows Vista 64bit on boot camp running hot?

I have just installed win vista and seems to be running quite hot?
I hardly use Microsoft OS anyway its just for apps but that seems to be running hot and not comfortable with it.
any idea?

Mainly this is because Windows cannot control the fans which causes the computer to heat up. It's a well known problem.
Some solutions include the use of fan control software for the Mac such as SMCFanControl to set the fan's idle speed to a higher level before booting into Windows. Another solution is Input Remapper.

2008 Mac Pro 3,1 RAM burning up - running hot

Problem: 2008 Mac Pro Tower running hot.
Possible causes: Power Supply? Fan not working? Machine has 667 mhz RAM not 800 mhz.
PSU was chirping like a cricket a few weeks ago. I pulled it out, air cleaned it (and the entire Mac, vacuumed all the dust) and left PSU out for 12 hours to static discharge, etc. When I put the PSU back in, it was working and the chirping was gone.
Successfully used the MAC for a few days, no probs other than 2 DIMMS went bad. I went away for 2 weeks, tried to start-up the Mac yesterday and it wouldn't power on at all, no light. I unplugged it, tried different outlets, power cords, etc. Then I removed any changes that I had made previously (i.e. installed diff HD and 2 new RAM DIMMs to replace the ones that burned up) before going away. I removed PSU and let it sit while I cleaned the 2 DIMMs that had seemed to overheat before I went away. Put it all back together (PSU, old DIMMs which were cleaned and left HD #3 out) and it powered up. I then noticed that I was down from 32 GB RAM to 16 GB very quickly. The machine had also "shut down because of a problem" during that time then restarted and ran for a bit. I repaired the 16 GB RAM by cleaning it, brought it back up to 32 GB again and within minutes it was back to 24 GB. I pulled the RAM cards out and they were hot. The last 8 GB to go were likely the only DIMMs I haven't cleaned yet. I don't know how long that fix will last. Seems like we have a pattern of over heating.
Any ideas? Is it the 667 mhz RAM? The PSU? The fan? (How do you test a fan?)
Thank you for your time.
2008 Mac Pro 3,1
2x Quad Core 2.80 Ghz Intel Xeon
32 GB RAM (667 mhz)
3 HD's
10.9 OS Mavericks
Logic Pro X

First the RAM must be made for your computer as determined by Apple:
https://discussions.apple.com/docs/DOC-6413
Thus you have an early 2008 Mac Pro if it is a Mac Pro tower and not a MacBook Pro notebook.
The RAM must be either preinstalled by Apple, or from a place that sells lifetime warranty early 2008 Mac Pro RAM.
Just because you got PC6400 DDR2 ECC 800 Mhz FB-DIMM with 256 bit wide memory architecture, as the specs call for,
does not mean the RAM is compatible. Only RAM stated to be for "early 2008 Mac Pro" is compatible with those towers.
http://www.macsales.com/ (OWC) http://www.datamem.com/ and http://www.crucial.com/ all sell RAM by stating the time of year and model name.
Do not buy ValueRAM. If after doing that it doesn't work, some directions for other interior repairs exist on http://www.ifixit.com/ and http://www.xlr8yourmac.com/
Check to make sure the circuit your machine is on is giving off the full amp called for by specs and that current is not split to other devices, and you have either a UPC or surge protector power cord that can handle that ampere. If there is any chance the machine was plugged in during a lightning storm, your power supply may be fried even with a surge protector or UPC being there. No surge protector is 100% lightning foolproof.

I have a macbook pro 10.6.8 system. My hard drive was replaced under warranty. Since then, my computer runs hot. The original hard drive never ran hot. What would cause the new hard drive to run hot?

I have a 2011 MacBook Pro, OS X 10.6.8, 2.2 GHz Intel Core i7, 4 GB 1333 MHz DDR3. This is my first computer so don't know anything about trouble shooting. A week before the warranty expired, I took my computer to Apple to be checked. I was told that my hard drive was bad and they replaced the hard drive. Since then, my computer runs hot most of the time and the fan is constantly coming on, which is good My computer rarely ran hot with the original hard drive. What would be causing this?

racergirl,
have you tried resetting your MacBook Pro’s System Management Controller, to see if that makes a difference with the heat?

Imac 27 runs hot as ****, won't sleep, and cpu runs wild in w7

I have been having audio issues with the imac 27. plugging headphones or speakers causes cpu to run crazy, the mic in the triband trrs jack does not work, and the imac runs hot, and will not go into power saver mode.
When I came in I found my nephew who was listening to some music on the imac, and I felt the back top of the imac and it was hot as ****. I almost burned my hand. I realized then that he had plugged his headphones in.
Unplugging the headphones or speakers can solve some of these problems.
But, this is not an acceptable fix.
Please contact Apple and urge them to fix these sound card issues.
If anyone does not have these problems in w7 with the imac 27 even after the latest bootcamp and imac updates, let us know right here. I think this affects every one of the late 2009 imacs and maybe some earlier ones too running windows 7.
Here's the post I recently ran on the headphone jack issue.
Not only does the cpu run crazy but the imac 27 gets very, very hot. Since I unplugged the headphones, it runs much, much cooler.
Certainly, some Mac engineers should take care of this problem, it seems it is universal on all the imac 27's and from what I gather, the smaller screened cousins too.
Also, we certainly want a stereo mix option for audio in or out, or what is called "what you hear" or wave out. Imac is supposed to be much geared to multimedia apps.
Finally, the mic jack part of the trrs set up MUST be fixed! A lot of manufacturers are going to headset combo jacks as they call them, mic in and stereo out on the same tribanded plug. But, the old single jack for mic in and single jack for stereo out are two tiny parts of the hardware and super inexpensive for the manufacturer. Why in the **** to go to the "advanced" triplug if the **** thing doesn't work.
Mac has a great reputation. I hope they remedy these problems right away.
Anyone whose imac 27 or 24 whose headset plug is working correctly. Let us know! I don't think anyone's is, but I think that few people understand that their cpu is running so much faster with the plug in, plus few even understand the combo jack and the triband, or trrs audio jack! Out of 4 audio technicians I talked to, not one of them knew what a trrs jack was or that you even have a mic in jack as part of the headset jack!
When I told one senior that it worked on the Mac side, he didn't believe for a while, thought my sound might be recorded from the onboard mic, but I proved it to him by tapping iaudibly on my iphone mic headset and and it showing up in garage band clearly and listening to big difference in audio.
As for a usb audio adapter, I am in a neon light environment and find that those adapters are more sensitive to electrical interference. Besides I want to use the headset jack as it was meant to be used!
Thats it.
Again, if anyone using an imac 27 and windows 7 64 or 32 doesnt have these problems, let us know! We are all anxious for a fix!
Best to all!

Yes, I have been dealing with this problem since early January. I just can't believe that apple would not have the necessary driver for the sound card in the Imac 27! That's like trying to run a race and not bothering to tie your shoes! How can they not have something as basic as the sound connections working???
I was encouraged to buy a top of the line imac 27 because Apple had told us that bootcamp would enable Windows users to use the machine just as if it were a native windows machine, then they don't give us the **** drivers to use the trrs mic jack. And you can't use the external speakers without the cpu going wild and heating up like a pot bellied stove.
This is really disheartening and now I am really thinking I made a big mistake. I wouldn't mind migrating to Mac gradually, but I have lot of scientific and other programs that require windows. At this rate there will be thousands of other mac buyers who will never make the same mistake again.
As you can see I am quite angry about this, and getting more angry with each day Apple ignores every imac purchaser who expected to use Windows on the machine! Is the software for a sound card driver that difficult?
Having a computer which doesn't have sound that works correctly, is like having a car without seat, you can still drive it but isn't very **** comfortable.

MBP running hot, full fans and sluggish with both Safari and Firefox

Hi guya,
Im having problems with my kate 2007 MBP.
Im sure lately it seems to be running slower and slower and more and more sluggish - I was hoping my Mac wouldn't be subject to "slowdown" like every PC ive ever owned has.
The biggest problem is that if i use either Safari or Firefox to browse the web, they quickly start using 80-100% of my processor causing everything else to run sluggish, the computer to get hot, processors to run up to 90 degrees and fans on full.
Perhaps i multitask more than some people - I can tend ot have a lot of tabs open in Firefox, but sometimes Safari or Firefox show this behaviour with just one tab open.
I do multitask by having about 8 programs open at once and I jump from job to job, but in its early life the MBP used to deal with this - now i feel that i type faster than writing appears on screen, i have to wait ages to work in programs like indesign, and forget trying to run a game like The Sims...
Does everyone else have the 100% processor problems with Safari (and yes im on version 4, and the latest version of firefox too) the only browser which doesn't give me these problems is Opera - I can have many tabs open and it uses very little CPU, I just dont like use Opera as much as Firefox which is my browser of choice.
But why would my OSX run differently to anyone elses? Is there a problem with my Macbook, is there a problem with OSX (does it need installing again?) Is it just time for me to buy a new Macbook Pro - or if I run firefox on that will i get the same problem? Ive got nearly 30gb of spare HD space and maxed it out with 4gb of Ram - so neither of those are causing a problem either...
Any input would be great...

Have you tried restarting the comp? Sometimes a simple refresh will cure the sluggishness.
Try running repair permissions from your HD and afterwards run +repair disk+ from your software install DVD.
Regarding your comp running hot, make sure it is properly ventilated while in use. The MBP is not a laptop. According to the user manual it states in part:
+"Do not operate your MacBook Pro on a pillow or other soft material, as the material can block the airflow vents. Never place anything over the keyboard when operating your MacBook Pro. Never push objects into the ventilation openings."+

Dead USB port running hot

I have a mid-2010 white unibody MacBook. It's been running fine, with the exception of a problem with the dashboard after the most recent firmware upgrade about a year ago. I just learned to work around it. But then Friday I got an error saying the the USB port was drawing too much power and was shut down. Sudden and random, as it had never happened before and showed up as I woke it up from screensaver mode. Nothing was plugged in. I have a Magic Trackpad and a Logitech keyboard connected via Bluetooth. Disconnecting them doesn't affect the error. I've tried rebooting and resetting PRAM & SMC. I'm trying to reinstall Lion, but I don't think it's a clean or fresh install. Has anyone encountered a USB port that dies but runs hot? The CPU seems to run a lot warmer than usual, buy about 20° F.
Any help is appreciated!

Take a look at this discussion:
https://discussions.apple.com/message/22922870#22922870
I recommend you make an appointment at an Apple genius bar and take the Mac in for a free diagnosis.
http://www.apple.com/retail/storelist/

Desktop computer runs hot

I have a HP Pavillion desktop running windows 7. It's a pc and monitor in one. My computer is running hot. I vacummed the vents then used a cotton swab to clean the outside of the vents and I also am using a seperate fan to blow cool air on it. Is there a way that I can take the back off and clean with a can of suppressed air?
This question was solved.
View Solution.

Thank you for the additional information. It is exactly what I needed.
Here is a video that should help you remove the cover of your computer. Please be extremely careful not to break any of the tabs:
Please click "the Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

MacBook seems to run hot

My new MacBook Pro seems to run hot. Only have Safari with one window and Finder running. Is this normal?

Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Also, it helps to tell us what the temperatures are because we don't know what you mean by "hot."

My PowerBook G4 runs hot after installing iTunes 7.1

Only Safari and iTunes open. The iStat Pro shows the CPU bottom and top around 55 degree Celcius (but the temp haven't changed since then...crash between 7.1 and iStat? but I can feel my PB runs hot)
Anybody got the same problem?

Ditto here.
Mac OS 10.4.9. iTunes 7.1.1 (5)
Airport Extreme Base Station "chained" to 2 Aiport Express Remotes. All connections are fine. Have internet on remote Macs. Airport Admin utility displays all three airport units, but I'm now unable to broadcast to the remote Express hooked up to my stereo in adjacent room. Have done this many times in the past without problem, but not in past couple months, so can't say if it broke with 7.1 or 7.1.1, but I get this message from iTunes:
The remote speaker "Living Room Speakers" is not compatible with this version of iTunes.
Prior to restarting iTunes (and being sure all Aiport station firmware was up-to-date, I was getting the message that no speakers were connected (double-checked all speaker and stereo connections), but now just the "not compatible" message.
G5 2.7 Dual Processor Mac OS X (10.4.9) 2 GB RAM
G5 2.7 Dual Processor Mac OS X (10.4.3) 2 GB RAM

Downloaded Xcode 5.0.2 and Macbook is running hot

I just downloaded Xcode 5, and then the update to XCode 5.0.2, and my processor is running over 100%. As a result, my computer is running hot only while XCode is running. Can anyone give a solution why, or how to prevent this issue? Thank you much for your assistance.

I ultimately deleted XCode 5.0.2, emptied the Trash, which took 2 days, and then downloaded XCode 5.0.2 again. Unfortunately, it did not solve my issue. My CPU is currently running at 98.5%.
The processor does not run hot when XCode 5.0.2 is not running. This issue only started occuring after installing XCode 5. My CPU never ran hot while running XCode 4. I still need some suggestions on resolving this issue.
Thank you for your response.

X60 runs hot on ultrabase

Similar Messages

Maybe you are looking for